QUANTA - Q2000/Q DIGIT PROCESS METER, TRANSMITTER & CONTROLLER (1) (2) (3) (4) (5) (6) (7) Q -
|
|
|
- Edith Garrett
- 5 years ago
- Views:
Transcription
1 QUANTA - Q2000/Q DIGIT PROCESS METER, TRANSMITTER & CONTROLLER 10 or 15 V dc excitation output (Q9000E) ±9,999-count display span Standard signal ranges of 4-20 ma, ma, 1-5 V or 0-10 V Selectable current ranges from ±1 to ±50 ma Selectable voltage ranges from ±0.5 to ±20 V Built-in shunts and attenuators Zero adjustment to ±100% of readout Front-panel accessible fine-zero and fine-span adjustments 1 mv/count analog output Bright, 0.56 in. (14.2mm) LED display Automatic polarity Display hold and test 120/240 V ac, 5 V dc, 9-32 V dc or V dc power Screw-terminal barrier strip 1/8 DIN case (1) (2) (3) (4) (5) (6) (7) Q - Option Descriptions (1) Display Resolution and Case Style Select 2 for ±1,999 counts (3 1/2 digits), 3 for ±1,999 with INFINITY FAMILY BEZEL AND ADAPTER, 9 for ±9,999 counts (4 digits), 8 for ±9,999 with INFINITY FAMILY BEZEL AND ADAPTER (2) Display Type & Meter Power - LCD Select 0 for LED, 120 Vac (49/440 Hz) (BQ20 or BQ90), 1 for LCD, 120 Vac (49/440 Hz) (BQ21), 2 for LED, 240 Vac (49/440 Hz) (BQ22 or BQ92), 3 for LCD, 240 Vac (49/440 Hz) (BQ23), 4 for LED, 9-32 Vdc (isolated) (BQ24 or BQ94), 5 for LCD, 9-32 Vdc (isolated) (BQ25), 6 for LED, 5 Vdc** (BQ26 or BQ96), 7 for LCD, 5 Vdc** (BQ27), 8 for LED, 24 Vac (BQ28 or BQ98), 9 for LCD, 24 Vac (BQ29), A for LED, Vdc (isolated) (BQ2A or BQ9A), B for LCD, Vdc (isolated) (BQ2B) (3) Analog Output Adders
2 Select 0 for ±1 or ±2 V recorder output, non-isolated. (standard), 1 for 0-5 Vdc, non-isolated (BA01), 2 for 0-10 Vdc, non-isolated (BA01), 3 for 0-1 ma, source or sink, non-isolated (BA01), 4 for 4-20 ma, source or sink, non-isolated (BA01), 5 for 4-20 ma, sink (high-compliance), nonisolated. (BA02), 6 for 4-20 ma, ISOLATED (BA03) (4) Control Output Adders Select 0 for None, 1 for Dual-setpoint 10 A relay. (BDT1), 2 for Proportional 4-20 ma control, source or sink (BDP1), 3 for Time-proportional solid-state 2 A relay plus proportional 4-20 ma control, source or sink. (BDP2), 4 for BCD (isolated, latched, buffered, byte addressable). Includes 50-pin mass-termination connector. (BDD2), 5 for Single-setpoint 10 A relay (BDS1) (5) Signal Conditioning Input Adders Select AVR1 for DC Voltage ± mv (Q2000/Q3000) or ± mv (Q8000/Q9000), AVR2 for DC Voltage ± V (Q2000/Q3000) or ± mv (Q8000/Q9000), AVR3 for DC Voltage ± V (Q2000/Q3000) or ± V (Q8000/Q9000), AVR4 for DC Voltage ± V (Q2000/Q3000) or ± V (Q8000/Q9000), BCR1 for DC Current ± µa (Q2000/Q3000) or ± 9.999µA (Q8000/Q9000), BCR2 for DC Current ± µa (Q2000/Q3000) or ± 99.99µA (Q8000/Q9000), BCR3 for DC Current ± ma (Q2000/Q3000) or ± 999.9µA (Q8000/Q9000), BCR4 for DC Current ± ma (Q2000/Q3000) or ± ma (Q8000/Q9000), BCR5 for DC Current ± ma (Q2000/Q3000) or ± ma (Q8000/Q9000), BCR6 for DC Current ± A (Q2000/Q3000) or ± ma (Q8000/Q9000), CVR2 for AC AVG Voltage mv (Q2000/Q3000) or mv (Q8000/Q9000), CVR3 for AC AVG Voltage V (Q2000/Q3000) or mv (Q8000/Q9000), CVR4 for AC AVG Voltage V (Q2000/Q3000) or V (Q8000/Q9000), CVR5 for AC AVG Voltage V (Q2000/Q3000) or V (Q8000/Q9000), CVR6 for AC AVG Voltage 650 V (Q2000/Q3000) or V (Q8000/Q9000), DCR1 for AC AVG Current µa (Q2000/Q3000) or µa (Q8000/Q9000), DCR2 for AC AVG Current µa (Q2000/Q3000) or µa (Q8000/Q9000), DCR3 for AC AVG Current ma (Q2000/Q3000) or µa (Q8000/Q9000), DCR4 for AC AVG Current ma (Q2000/Q3000) or ma (Q8000/Q9000), DCR5 for AC AVG Current ma (Q2000/Q3000) or ma (Q8000/Q9000), DCR6 for AC AVG Current A (Q2000/Q3000) or ma (Q8000/Q9000), DCR7 for 5 Amp Current trnsformer- 5 A = A (Q2000/Q3000) or 5 A = A (Q8000/Q9000), FVR2 for True-RMS Voltage mv (Q2000/Q3000) or mv (Q8000/Q9000), FVR3 for True-RMS Voltage V (Q2000/Q3000) or mv (Q8000/Q9000), FVR4 for True-RMS Voltage V (Q2000/Q3000) or V (Q8000/Q9000), FVR5 for True-RMS Voltage V (Q2000/Q3000) or V (Q8000/Q9000), FVR6 for True- RMS Voltage 650 V (Q2000/Q3000) or 650 V (Q8000/Q9000), GCR1 for True-RMS Current µa (Q2000/Q3000) or µa (Q8000/Q9000), GCR2 for True-RMS Current µa (Q2000/Q3000) or µa (Q8000/Q9000), GCR3 for True-RMS Current ma (Q2000/Q3000) or µa (Q8000/Q9000), GCR4 for True-RMS Current ma (Q2000/Q3000) or ma (Q8000/Q9000), GCR5 for True-RMS Current ma (Q2000/Q3000) or ma (Q8000/Q9000), GCR6 for True-RMS Current A (Q2000/Q3000) or ma (Q8000/Q9000), GCR 7 for 5 Amp Current transformer 5 A = A (Q2000/Q3000) or Default calibration 5 A=99.99 A (Q8000/Q9000), H for Frequency/rate input - Default calibration 100mV Hystersis 1000 Hz = 1000 (Q2000/Q3000) or 1000 Hz = (Q8000/Q9000) (BSCH1), JDC1 for Thermocouple input types J, K, and T -40 to +760 C (Q2000/Q3000) or to C (Q8000/Q9000) (BSCJ), JDF1 for Thermocouple input types J, K, and T -40 to F (Q2000/Q3000) or to F (Q8000/Q9000) (BSCJ), KDC1 for Thermocouple input types J, K, and T -40 to F (Q2000/Q3000) or to C (Q8000/Q9000) (BSCK), KDF1 for Thermocouple input types J, K, and T -40 to F (Q2000/Q3000) or to F (Q8000/Q9000) (BSCK), TDC1 for Thermocouple input types J, K, and T -184 to 371 C (Q2000/Q3000) or to C (Q8000/Q9000) (BSCT), TDF1 for Thermocouple input types J, K, and T -300 to 700 F (Q2000/Q3000) or to F (Q8000/Q9000) (BSCT), MDC1 for RTD (Pt 100) input (BSCM) -200 to +830 C (Q2000/Q3000) or to C (Q8000/Q9000) (BSCM), MDF1 for RTD (Pt 100) input (BSCM) -328 to F (Q2000/Q3000) or to F (Q8000/Q9000) (BSCM), RDC1 for RTD (Pt 100) input (BSCM) to
3 199.9 C (Q2000/Q3000), Not Recommended for Q8000/Q9000 (BSCR), RDF1 for RTD (Pt 100) input (BSCM) to F (Q2000/Q3000), Not Recommended for Q8000/Q9000 (BSCR), NPR1 for 3-wire ratio potentiometer input (BSCA) 1000 = 1 kohm (Q2000/Q3000) or 9999 = 1 kohm (Q8000/Q9000), NPR2 for 3-wire ratio potentiometer input (BSCA) 1000 = 5 kohm (Q2000/Q3000) or 9999 =5 kohm (Q8000/Q9000), OOR1 for 2- or 4-wire resistance input (BSCR) ohm (Q2000/Q3000), Not Recommended for Q8000/Q9000 (BSCR), OOR2 for 2- or 4-wire resistance input (BSCR) ohm (Q2000/Q3000), Not Recommended for Q8000/Q9000 (BSCR), OOR3 for 2- or 4-wire resistance input (BSCR) 1999 ohm (Q2000/Q3000), Not Recommended for Q8000/Q9000 (BSCR), OOR4 for 2- or 4-wire resistance input (BSCR) kohm (Q2000/Q3000), Not Recommended for Q8000/Q9000 (BSCR), P for Process Signal Input, E for Process Signeal Input plus Excitation Output, S for Strain-gage/microvolt input plus excitation (6) Display Color Select Nothing(leave field blank) for Red Display (standard),,g for Green Display (7) Lens Select Nothing(leave field blank) for Standard Lens (with Newport logo),,bl for Blank Lens NOTE: All combinations may not be valid, check spec sheet for valid part numbers. Copyright 2001, NEWPORT Electronics, Inc. All rights reserved.
4 1/8 DIN (1A) CASE Used with QUANTA, 203A, 204B, 267B, 268, 269, 872A, 2003B, 2004B, 6130A 1/8 DIN (2A) CASE Used with 201A, 202A, 2001A, 2002A, 6152A, 6161A, 6162A, 6163A
5 Copyright 2003, NEWPORT Electronics, Inc. All rights reserved.
6 QUANTA D4
7 NEXT Copyright 2003, NEWPORT Electronics, Inc. All rights reserved.
DP2000 ORDERING GUIDE To Order MODEL NO.
1 8 DIN VERSATILE PROCESS MONITORS CONFIGURABLE DP2000-S, 1 8 DIN meter, shown smaller than actual size. DP2000 Series Complete with Input Board RoHS 2 Compliant DP2000-J1, with TJ36-ICSS-116G-12, transition
Miniature Low-Cost Temperature Transmitters MTX
Miniature Low-Cost Temperature Transmitters MTX Two-Wire Design 4-20 ma dc Output ±0.1% Accuracy Upscale Break Protection Non-Isolated Mountable in Any Standard Protection Head Accepts J, K, T, E Thermocouple
Economical Digital Indicators For Process and Electrical Measurement
Economical Digital Indicators For Process and Electrical Measurement DP18 Series Panel Punches Available DP18-P5, 4 to 20 ma input. DP18-EC, thermocouple input visit omega.com/thermocouple for thermocouples.
ISOLATED 4-20 ma TRANSMITTERS
500 SERIES FOR DEMANDING APPLICATIONS Isolated to 1500 V rms Two-Wire 4-20 ma Operation 9-50 V Compliance Turndown Ratio to 10:1 NMV Protection to 120 Vac -40 to +85 C (-40 to 185 F) Operation Shock Resistance
QUANTA. Q2000-F AC RMS Voltage Q2000-G AC RMS Current Process Monitors. Operator s Manual.
QUANTA Q2000-F AC RMS Voltage Q2000-G AC RMS Current Process Monitors Operator s Manual http://www.newportus.com/manuals Additional products from Counters Frequency Meters PID Controllers Clock/Timers
DRG-SC Series Signal Conditioners
DRG-SC Series Signal Conditioners DRG-SC Series 245 Basic unit Models Available for Thermocouples, RTDs, DC Voltage and Current, Frequency, Strain Gage Bridge, AC Voltage and Current Field Configurable
DIN SERIES DIGITAL PANEL METERS ELECTRO- NUMERICS, INC.
DIN SERIES DIGITAL PANEL METERS ELECTRO- NUMERICS, INC. MODEL SELECTION GUIDE The DIN Series of Digital Panel Meters are rugged low cost meters for the measurement of dc voltage, dc current, Process voltage
FC-33, DC SELECTABLE SIGNAL CONDITIONER
FC-33, DC SELECTABLE SIGNAL CONDITIONER Description. The FC-33 is a DIN rail or side mount, selectable input/output signal conditioner with 1500VDC isolation between input and output, and 1500VDC isolation
PANEL MOUNT PROCESS METER IDP
NEWPORT PRODUCT INFO MANUAL (HTML) - PDF Version QUICK START MECHANICAL PRICE REQUIRES ADOBE ACROBAT - HELP PANEL MOUNT PROCESS METER IDP Very easy scaling Easily Scaled in Any Engineering Unit from -1999
LAUREL ELECTRONICS, INC.
LAUREL ELECTRONICS, INC. Laureate True RMS AC Voltage & Current Meter with 1 Cycle Update at 50/60 Hz Features True AC or AC plus DC RMS measurement with crest factor of 3.0 at FS Fast response: reading
UL CONDITIONS OF ACCEPTABILITY
Certificate Number: 1018011-1 Date: 2016-10-06 UL CONDITIONS OF ACCEPTABILITY Company Name: FUTURE DESIGN CONTROLS INC File-CCN: E197216 - QUYX2 Product Description: Process Control Equipment, Electrical
4-20mA, 0-10V and general process measuring bargraph displays
Page 1 of 6 Digital panel meters Large displays Bargraphs Transmitters 4-20mA, 0-10V process input bargraph displays Display almost any physical variable... The bargraph displays on this page accept most
Isolation (ISO), Special Overvoltage functions protection (OP) Voltage measurement PAD-V8-P 8 Voltage, up to ±50 V BW: 6 Hz ISO: 350 V DC
Selection Guide PAD Series Modules Multi channel Low bandwidth - for static signals Isolation Digital output (RS-485) Exchangeable For DEWETRON systems with built-in DAQ rack Module # CH Input type Ranges
CONTA-ELECTRONICS. Converter Units
CONTA-ELECTRONICS Whether for manufacturing, electrical machine and plant instrumentation, control engineering, power distribution, building automation, or process engineering it is always important to
EN SERIES NEMA CASED DIGITAL PANEL METERS ELECTRO- NUMERICS, INC.
EN SERIES NEMA CASED DIGITAL PANEL METERS ELECTRO- NUMERICS, INC. 1,999 COUNT DIGITAL PANEL METERS FEATURES 1,999 Counts Full Scale NEMA Case (1.682" x 3.924" Cutout) LSI State-of-the Art Circuitry Bipolar,
TSC. Transtech Signal Conditioners. Galvanic Isolation as Standard Full Input Range Field Adjustable 0.1% Accuracy Dual Rail Mounting.
TSC Transtech Signal Conditioners Industrial AUSTRALIAN DESIGNED AND MANUFACTURED Process Galvanic Isolation as Standard Full Input Range Field Adjustable 0.1% Accuracy Dual Rail Mounting Mining Dec 2005
658 Current to Position Converters
658 Current to Position Converters Current to Position Converters for Solid State Switching Output Adjustable Zero, Span and Deadband Two Wire Input from Controller Operates with 90 to 1000 Ω Feedback
INSTRUCTION MANUAL CLEVELAND-KIDDER TENSION INDICATOR SERIES AO REVISION
INSTRUCTION MANUAL CLEVELAND-KIDDER TENSION INDICATOR SERIES AO-70308 REVISION AA CLEVELAND-KIDDER TENSION INDICATOR AO-70308 REVISION HISTORY Rev ECO Author Date Description of Change AA - - - CAD 07/28/2005
Section 1, General information Introduction... 3 Description... 3 Specifications... 4 Wiring connections... 5
LIST OF CONTENTS Section 1, General information Introduction... 3 Description... 3 Specifications... 4 Wiring connections... 5 Section 2, Calibration Calculations... 7 Calibration Procedure... 8 Section
Hawk 3 Digital Panel Meter / Controller
File # E199939 All parameters set from easy to understand front panel access One, two or four 5-amp relays optional Five user-selectable brightness levels 1/8 DIN, shallow depth case, 3.24 RS485 digital
Model 4800 O P E R AT I O N M A N U A L L O A D C E L L S U M M I N G T R A N S M I T T E R
O P E R AT I O N M A N U A L Model 4800 L O A D C E L L S U M M I N G T R A N S M I T T E R CALEX Manufacturing Company, Inc. Concord, California 94520 Ph: 925/687-4411 800/542-3355 Fax: 925/687-3333 http://www.calex.com
Condition Monitoring Custom Products
CMCP500 Series Transmitters/Monitors Low Cost Din rail mount 4-20 ma output Sensor fault detection Buffered transducer output Optional filters Alert, Danger & OK Alarms and Relays Trip Multiply Remote
Falcon F35 & F45 Digital Panel Meters
1/8 DIN Indicator 3-1/2 or 4-1/2 digit bright red LED display Front panel pops off for easy decimal point setting and display scaling Only 3.12 (79mm) required behind panel Optional excitation output NEMA
RATE / TOTAL / BATCH METERS INF7
RATE / TOTAL / BATCH METERS INF7 Rate and Total Simultaneously Batch Controller Real-Time Clock Square Root Programmable Isolated BCD Option Isolated analog input Option 5 Open Collector Outputs Standard
USB-TEMP and TC Series USB-Based Temperature Measurement Devices
USB-Based Temperature Measurement Devices Features Temperature and voltage measurement USB devices Thermocouple, RTD, thermistor, or semiconductor sensor measurements Eight analog inputs Up to ±10 V inputs*
96x48. m/s. Digital panel meter 3½-digit DV3, DT3. Without setpoints. Analog output. Sensor supply
m/s Digital panel meter 3½digit DV3, DT3 Without setpoints Analog Sens supply status 06/03/0 panelmeter_gb.doc page subject to alterations; errs including printer s errs Digital panel meter Direct voltage
2002-ALM USER MANUAL
00 - ALM DUAL TRIP AMPLIFIER Whilst every effort has been taken to ensure the accuracy of this document, we accept no responsibility for damage, injury, loss or expense resulting from errors or omissions,
New Signal Conditioner VJ series
New Signal Conditioner VJ series Yokogawa M&C corporation 1st Edition March 2000 Signal Conditioner Families YTA series* Temperature transmitter VJ series Small Plug-In type Intelligent Communication New
High Performance Process & Temperature Controllers
C22 C62 C82 C83 High Performance Process & Temperature Controllers C72 C42 R22 01. Multi Color LCD Display 02. High Accuracy 18 Bit A-D Input and 15 Bit D-A Output 03. 200 msec Sampling Rate 04. True Universal
96x48. m/s. Digital panel meter 3½-digit DV3, DT3. Without setpoints. Analog output. Sensor supply
m/s Digital panel meter 3½digit DV3, DT3 Without setpoints Analog Sens supply status /0/04 panelmeter6x4_gb.doc page subject to alterations; errs including printer s errs 6x4 Digital panel meter Direct
4002-ALM USER MANUAL 4002 ALM DUAL TRIP AMPLIFIER WITH RE-TRANSMITTED OUTPUT
4002 ALM DUAL TRIP AMPLIFIER WITH RE-TRANSMITTED OUTPUT Whilst every effort has been taken to ensure the accuracy of this document, we accept no responsibility for damage, injury, loss or expense resulting
About Laurel Electronics & FLW, Inc.
About Laurel Electronics & FLW, Inc. Company Background Founded in 1990, Laurel Electronics Inc. has emerged as the technical leader in modular, microprocessor-based panel instrumentation for indication,
WORLD S SMALLEST BARGRAPH METER LOOP OR AC/DC POWERED > 30 INPUT SIGNAL CONDITIONERS
New! WORLD S SMALLEST BARGRAPH METER LOOP OR AC/DC POWERED > 3 INPUT SIGNAL CONDITIONERS Model SBM FEATURES: *3 Colors: red, green or yel. * Dual Independent A/D (For Bar & Digital) *Loop Powered (4-2mA)
A Few Applications For Signal Conditioners
A Few Applications For Signal Conditioners Signal Conditioners are used to isolate, amplify, filter, and convert a variety of input signals to clean output signals that can be more easily handled by process
Excellent low-cost Process & Temperature Controllers
C22 C62 C82 C83 Excellent low-cost Process & Temperature Controllers C72 C42 R22 01. High Quality LCD Display 02. High Accuracy 18 Bit A-D Input and 15 Bit D-A Output 03. The Fast Sampling Rate in 200
DIGITAL PANEL INSTRUMENTS
M2-1V.../ M2-1T... M2-1V.../ M2-1T... Case 96 x 48 mm Programmable Digital Panel 96 x 48 mm Red display of -1999 up to 99999 (optional green, orange, blue or tricolour display) Minimal installation depth:
ULTRA SERIES OWNERS MANUAL MODELS UA UB UC ELECTRO-NUMERICS, INC.
ULTRA SERIES OWNERS MANUAL MODELS UA UB UC ELECTRO-NUMERICS, INC. CONTENTS Page INTRODUCTION... 1 MAIN BOARDS and POWER SUPPLIES... 1 INPUT and OUTPUT PLUG-IN MODULES... 1 POWER CONNECTIONS... 3 SIGNAL
269 Troubleshooting Guide 11/4/98 1
269 Troubleshooting Guide 11/4/98 1 Table of Contents Phase currents 3 Communications. 6 RTDs.. 9 Ground Fault Currents... 13 Output Relays. 15 Analog Output 17 Switch Inputs...18 11/4/98 2 Phase Currents
48x48. Digital panel meter 3½-digit DV3, DT3. Without setpoints. Analog output
kw Digital panel meter ½-digit DV, DT Without setpoints Analog status /0/04 - panelmeter_gb.doc page subject to alterations; errs including printer s errs Digital panel meter Direct voltage Direct current
minimal installation depth: 97 mm without plug-in terminal min-/max-value recording display flashing at threshold undercut/ exceedance
Digital panel meter 4-digit M1 red display with -1999 9999 digits (optional green, orange or blue displays) minimal installation depth: 97 mm without plug-in terminal adjustment via factory default or
Data Acquisition Modules/ Distributed IO Modules
User Manual Data Acquisition Modules/ Distributed IO Modules Future Design Controls, Inc. 7524 West 98 th Place / P.O. Box 1196 Bridgeview, IL 60455 888.751.5444 - Office: 888.307.8014 - Fax 866.342.5332
Introduction ISOLATED SIGNAL CONDITIONING can significantly increase
Introduction ISOLATD SIGNAL CONDITIONING can significantly increase your system reliability here's how: Linearizes Thermocouple and RTD signals Reduces the demands on the software to linearize the signal
MINI 048 / JUN 2003 PAGE 1. Temperature I/O Module HE500OCS048 / HE500OCS078 HE500RCS078
MINI 048 / 078 07 JUN 2003 PAGE 1 Temperature I/O Module HE500OCS048 / HE500OCS078 HE500RCS078 Mini OCS/RCS 1 SPECIFICATIONS Relay Outputs Number of Channels 2 N.O. Relays Maximum Load Current (resistive)
Isolated 4 to 20 ma Transmitters For Demanding Applications Thermocouples, RTD (Pt100) or Ohms, Millivolts, Milliamps, Volts
Isolated Transmitters For Demanding Applications Thermocouples, RTD (Pt100) or Ohms, Millivolts, Milliamps, Volts TX1500 Series U Isolated to 1500 Vrms U 2Wire Operation U 9 to 50V Compliance U Turndown
R24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY
Čapkova 22 678 01 Blansko tel.: +420 516 416942, 419995 fax: +420 516 416963 R24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY Display module is designed for measuring the resistance, the signal from the
minimal installation depth: 70 mm without plug-in terminal 30 additional adjustable setpoints (parameter driven)
Digital panel meter 5-digit M2 red display of -19999 99999 digits (optional green, orange, blue or tricolour display) minimal installation depth: 70 mm without plug-in terminal adjustment via factory default
MZB SERIES. Intrinsically Safe Shunt Diode Safety Barriers. Phone: Fax: Web: -
MZB SERIES Intrinsically Safe Shunt Diode Safety Barriers Turck of Intrinsically Safe Shunt Diode Safety Barriers New series of Zener Barriers include a wider product range for more flexibility in more
NetBiter I/O Extender 4RO 6RTD 8DIO - DAIO User Manual Revision 1.00
NetBiter I/O Extender 4RO 6RTD 8DIO DAIO User Manual Revision 1.00 IntelliCom Innovation AB Linjegatan 3D SE302 50 Halmstad SWEDEN Phone +46 35 18 21 70 Fax +46 35 18 21 99 email info@intellicom.se www
MODEL: M6SXU MODEL: M6SXU [1][2] [3][4]
![MODEL: M6SXU MODEL: M6SXU [1][2] [3][4]](/thumbs/80/80784777.jpg "MODEL: M6SXU MODEL: M6SXU [1][2] [3][4]")
Tension-Clamp Ultra-Slim Signal Conditioners M6S Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Maintenance-free tension clamp connection Universal input (mv, V, ma, T/C, RTD and potentiometer)
SEM1600T RTD/TC/SLIDE WIRE SIGNAL CONDITIONER
RTD, THERMOCOUPLE, THERMISTOR (BMS SENSORS), SLIDE WIRE, mv AND RESISTANCE INPUTS ma, VOLTAGE OR BIPOLAR VOLTAGE OUTPUT SENSOR OFFSET (TEMPERATURE) 22 SEGMENT USER LINEARISATION (PROCESS) CONFIGURATION
User manual V1.0 RTB231 RTB232. RTD transmitter
User manual 26.9.2007 V1.0 RTB231 RTB232 RTD transmitter 1 INTRODUCTION RTB231 and RTB232 are basic level DIN rail mounted transmitter for RTD sensors. The range and sensor type are programmable using
Uni-Mux XQL Multi-Channel Data Acquisition Module
Uni-Mux XQL Multi-Channel Data Acquisition Module Uni-Mux XQL Multi-Channel Data Acquisition Module * 8 channel differential inputs. * 16 channel single ended inputs. * User programmable via P.C. software.
MODEL PAX 1/8 DIN ANALOG INPUT PANEL METERS
Tel +1 (717) 767-6511 Fax +1 (717) 764-0839 www.redlion.net Bulletin No. PAX-P Drawing No. LP0545 Released 01/15 MODEL PAX 1/8 DIN ANALOG PANEL METERS PROCESS, VOLTAGE, CURRENT, TEMPERATURE, AND STRAIN
Two Wire Temperature Transmitter LTX-3000-H-2 LTX-3000-H LTX-3000-W LTX-3000-D
Two Wire Temperature Transmitters (Product Code 18.1 To 18.8) LTX-3000-H-2 LTX-3000-H LTX-3000-W LTX-3000-D Model Wise Description: Sr.No Model Product Description 18.1 LTX-3000-H Two Wire Temperature
SAFE SSAM-N CYBER SECURITY
NEW SAFE CYBER SECURITY 100% ANALOG METER REPLEMENT FOR SIGNAL & EXTERNALLY POWERED: Current Loops, (V, A, W, Hz) and DC (V, A & W) CLASS, APP. B & MIL/AEROSPE GRADES AVAILABLE SSAM-N (Patent Pending)
Module Input type Ranges TEDS Filters (LP = lowpass, HP = highpass) Piezoresistive bridge ±0.5 to mv/ma 1 ma exc
HSI Series Modules Selection Guide HSI Series Modules Single channel High bandwidth - for dynamic signals Isolation (all models Analog signal output (±5 V Single channel modularity For DEWETRON systems
Model 332 Temperature Controller
94 Instruments Model 332 Temperature Controller Features Operates down to 500 mk with appropriate NTC RTD sensors Model 332 Temperature Controller Two sensor inputs Supports diode, RTD, and thermocouple
CSG110 Strain Gauge Universal Amplifier
Quick Start Guide CSG110 Strain Gauge Universal Amplifier Sensor Solutions Source Load Torque Pressure Multi-Axis Calibration Instruments Software www.futek.com Getting Help TECHNICAL SUPPORT For more
minimal installation depth: 57 mm without plug-in terminal min-/max-value recording display flashing at threshold exceedance / undershooting
Digital panel meter 4-digit M1 red display of -1999 9999 digits (optional green, orange or blue display) minimal installation depth: 57 mm without plug-in terminal adjustment via factory default or directly
Analog Isolation Amplifiers
Isolation Amplifiers Automotive Energy & Power Analysis Aerospace & Defense Transportation General Test & Measurement Analog Isolation Amplifiers DAQ Series Modules DEWETRON high precision signal conditioning
Part Numbers. SNAP-AIARMS-i SNAP-AIARMS-i-FM* SNAP-AIVRMS-i SNAP-AIVRMS-i-FM* SNAP-AIMA-i. SNAP-AIMA-iSRC SNAP-AIMA-iSRC-FM* SNAP-AIMA2-i
SNAP Isolated Analog Input Modules Features Channel-to-channel isolation Rugged packaging and convenient pluggable wiring. Accepts wire. Factory calibrated; no user adjustment necessary Out-of-range indication
General Specifications
General I/O Adaptors (for N-IO) GS 33J62F30-01EN [Release 6] GENERAL This General (GS) describes the hardware specifications of I/O adaptors that enable extended functions setting for analog digital I/O
Absolute Process Instruments
Strain Gauge, Load Cell, Bridge Current Switches and Transmitters Amplify, alarm strain gauge sensor signals Economical sensors for current out-of range alarms or monitoring current levels APD 1520 APD
Model LD-LPIX EXPLOSION-PROOF LOOP POWERED INDICATOR
DEVAR Inc. 706 Bostwick Avenue, Bridgeport, CT 06605 203-368-6751 FAX 203-368-3747 http://www.devarinc.com e-mail: info@devarinc.com Model LD-LPIX EXPLOSION-PROOF LOOP POWERED INDICATOR R Manual No. 990649
USB-2404-UI Specifications
Specifications Document Revision 1.1, April, 2011 Copyright 2011, Measurement Computing Corporation All specifications are subject to change without notice. Typical for the range 0 to 60 C unless otherwise
Series GLET Accessory for dataloggers series GL in modular enclosure
PRESSURE LOAD TORQUE POSITION ROTARY ANGLE TILT ACCELERATION VIBRATION RATE SIGNAL CONDITIONER DATALOGGER Series GLET Accessory for dataloggers series GL in modular enclosure Models: GLET-IU-BNC-BA4 passive,
MODEL: KS. Plug-in Signal Conditioners K-UNIT
Plug-in Signal Conditioners K-UNIT DC ALARM Functions & Features Providing relay contact closures at preset DC input levels Dual (Hi/Lo) trip Multi-turn screwdriver setpoint adjustments Monitor jacks provided
Process Calibrator. TechChek 820
Process Calibrator TechChek 80 CONTENTS GENERAL... TURN ON... CONNECTIONS... TILT STAND...4 CHANGING BATTERIES...4 RESTORING DEFAULT SETTINGS... CONFIGURING TEMPERATURE SCALES... ENABLING AUTO-OFF... SELECTING
CTP16-Rotate. KMT - Kraus Messtechnik GmbH
KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com CTP16-Rotate 16 channel telemetry
INSTALATION, OPERATION & MAINTENANCE MANUAL. PA-1001A Series SIGNAL CONDITIONER & CONVERTORS
INSTALATION, OPERATION & MAINTENANCE MANUAL FOR PA-1001A Series SIGNAL CONDITIONER & CONVERTORS PA1001A 7/02 Page 1 of 11 SIGNAL CONDITIONER & CONVERTERS PA1001A Series INTRODUCTION: The PA1001A series
MCU-10. Display. Adjustments. Analogue Output, Measuring. Analogue Output, Setpoint. Standard Process Signal. LED Indication. LCD Display.
Introduction & Selection Guide INTRODUCTION The Brodersen monitoring relays are high quality products incorporating up-to-date circuit design together with modern, efficient components to ensure a long
minimal installation depth: 25 mm without plug-in terminal min-/max-value recording display flashing at threshold exceedance / undershooting
Digital panel meter 4-digit M1 red display of -1999 9999 digits (optional green, orange or blue display) minimal installation depth: 25 mm without plug-in terminal adjustment via factory default or directly
PM8005/6 PM8005/6. Panel Meter Panel Meter. AC and DC supply options. 5 digit LED display. Direct access menu
PM8005/6 AC and DC supply options 5 digit LED display Direct access menu Functions for calibration, alarm setting and more Wide range of optional functions Description The PM8000 Series digital panel meters
DC Voltage Hawk II H235 Series Advanced Digital Panel Meter
% DC Voltage Hawk II H35 Series Advanced Digital Panel Meter Easily Programmed from the Front Panel User-Friendly Software Functions Include: Password Display Scaling Decimal Point Selection Set Point
Temperature Transmitters - Head Mounted
XTH Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction
TO BE DISCONTINUED 12/2016. FOR REPLACEMENT MODEL, CLICK HERE: NTM-D. D. C. SIGNAL POWERED FOR V, 4-20 & madc
TO BE DISCONTUED 12/2016. FOR REPLACEMENT MODEL, CLICK HERE: NTM-D NEW D. C. SIGNAL POWERED FOR V, 4-20 & madc (& EXTERNALLY POWERED FOR OTHER SIGNALS) 3 1/2" ANALOG METER REPLACEMENT *>20 Signal Conditioners
HI 2204LT Loop Powered Level Weight Transmitter OPERATION AND INSTALLATION MANUAL
Loop Powered Level Weight Transmitter OPERATION AND INSTALLATION MANUAL Corporate Headquarters 9440 Carroll Park Drive San Diego, CA 92121 Phone: (858) 278-2900 FAX: (858) 278-6700 Web-Site: http://www.hardysolutions.com
SIGNAL INTERFACE MODULE
SIGNAL INTERFACE MODULE FEATURES Optically isolated inputs Field adjustable output Second onboard DC supply Positive / negative voltage output APPLICATIONS Phase cut to ma / VDC conversion Signal scaling
Anacon Power & Controls
2254 Main Street, Concord, MA 01742-3829 Tel: 800-466-9080 978-287-0715 Fax: 978-287-0952 www.anaconpower.com sales@anaconusa.com SCR Power Controllers Zero Cross Time Based / Burst Fire C - SCR (Burst)
NEW. MODEL ACL Pat. Pend. WORLD'S FIRST POWERLESS TM A.C. LOOP TRANSMITTER, CONTROLLER FOR: VOLTS-AMPS-WATTS-HERTZ
NEW WORLD'S FIRST POWERLESS TM A.C. LOOP TRANSMITTER, CONTROLLER FOR: VOLTS-AMPS-WATTS-HERTZ MODEL ACL Pat. Pend. FEATURES: Powered By Your P.T. or C.T.! No Power Supply Required Only 2 Wires to Connect
CT325 Miniature DC Temperature Controller
CT325 Miniature DC Temperature Controller Overview The CT325 Miniature DC Temperature Controller is designed for use with Minco Thermofoil heaters and RTD or thermistor sensors. It offers inexpensive on/off
Analog Isolation Amplifiers
Isolation Amplifiers Analog Isolation Amplifiers HSI/DAQ Series Modules DEWETRON high precision signal conditioning amplifiers are available for almost any sensor to measure Voltage Current Pressure Temperature
Temperature Transmitters - DIN Rail Mounted
XTD Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction
INSTALLATION & OPERATION MANUAL
INSTALLATION & OPERATION MANUAL Analog Signal Conditioner Rev. C Page 0 GENERAL DESCRIPTION: The frequency to current/voltage converter is designed to be a general purpose signal conditioner. The signal
USB-TC Instructions. Description
Description USB-TC Instructions The USB Temperature Controller (USB-TC) is a heating device that attaches to the bottom of an Ocean Optics USB Series spectrometer. This add-on option heats the spectrometer
MODEL: M2XU MODEL: M2XU [1][2] [3][4]
![MODEL: M2XU MODEL: M2XU [1][2] [3][4]](/thumbs/89/100578547.jpg "MODEL: M2XU MODEL: M2XU [1][2] [3][4]")
Super-mini Signal Conditioners Mini-M Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Accepts direct inputs from various sensors and provides a standard process signal I/O types and
KMT - Kraus Messtechnik GmbH
KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com CTP8-Rotate 8 (4) channel telemetry
WATT TRANSDUCER. Instruction Manual
WT 9200 WATT TRANSDUCER Instruction Manual IM-2 September 2003 USA: 6428 Ridglea Drive, Watauga, Texas 76148 Tel/Fax 1-817-427-2060/2067 E-mail: wes@westecinstruments.com SPECIFICATIONS Power Supply Input
Nokeval. Operators manual. Signal converter 641. No P
Nokeval No 00702P Operators manual Signal converter 61 1 Manufacturer recomendations: Use always shielded signal cables Install equipment to metall housing If plastic housings are used, it must be installed
CAH CARD. user leaflet. 1 of 15. Copyright Issue 12.1 January 2015
CAH CARD user leaflet 1 of 15 INTRODUCTION The function of the card is to energise a transducer (LVDT, Half-Bridge or Full-Bridge) with a stable a.c. waveform and to convert the output of the transducer
Series 1700 PX. Selection Guide. Threshold relays. Process signal converters/isolators. Temperature converters
Selection Guide Threshold relays Process signal converters/isolators Temperature converters Process signal to pulse frequency converters/isolators Pulse frequency to process signal converters/isolators
Multifunction Calibrator - Model 8080
.. Multifunction Calibrator - Model 8080 Current Calibrator to 20 A Voltage Calibrator to 1000 V Power Calibrator to 2400 W Exceptional Uncertainties Extremely User Friendly NIST Traceable Description
TO BE DISCONTINUED 12/2016. FOR REPLACEMENT MODEL, CLICK HERE: NTM-F
TO BE DISCONTINUED 12/2016. FOR REPLACEMENT MODEL, CLICK HERE: NTM-F NEW Signal Powered or 5-28VDC Powered FLAT PACK PANEL METERS NEED NO PANEL CUT OUT > 40 INPUT SIGNALS ACCEPTED MODEL FPM FEATURES: 4
Manual Supplement Fluke Corporation. All rights reserved. Printed in U.S.A. x
Manual Title: 5520A Service Supplement Issue: 5 Part Number: 802303 Issue Date: 3/05 Print Date: April 1999 Page Count: 7 Revision/Date: 1, 12/02 This supplement contains information necessary to ensure
Signal Conditioning Amplifier
2300 System Micro-Measurements FEATURES Accepts all strain gage inputs (foil and piezoresistive), potentiometers, DCDT s, etc Selectable bridge excitation, 0.7 to 15 VDC (11 steps), plus 0.2 to 7 VDC continuously
RM3-IV-LPI. 4-20mA Loop Powered Signal Isolators ma & DC Volts Inputs Operation and Instruction Manual
RMIVLPI Loop Powered ignal Isolators & DC Volts s Operation and Instruction Manual Introduction This manual covers the installation and operation of output loop powered signal isolator model. Model RMIV
Contents. 1 Block Diagram. 2 Specifications. 3 Unipolar vs. Bipolar Interconnections. 4 Inexpensive Bipolar Power Supply Alternative.
Contents 1 Block Diagram 2 Specifications 3 Unipolar vs. Bipolar Interconnections 4 Inexpensive Bipolar Power Supply Alternative 5 PCB Layout 6 Calibration 7 Current Source-Sink Units Connected in Parallel
MODEL: B3HU. Space-saving Two-wire Signal Conditioners B3-UNIT
Space-saving Two-wire Signal Conditioners B3-UNIT 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER (HART communication, intrinsically safe) Functions & Features Universal input: mv, V, T/C, RTD, resistance, potentiometer
Loop calibration and maintenance
Loop calibration and maintenance pplication Note Introduction Process instrumentation requires periodic calibration and maintenance to ensure that it is operating correctly. This application note contains
Isolated, Linearized RTD Input 7B34 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Linearized RTD Input 7B34 FEATURES Amplifies, Protects, Filters, and interfaces input voltages from a wide variety of two and three-wire platinum, copper and nickel Resistor Temperature Detectors