Vibration Measure System
|
|
- Lizbeth Dennis
- 5 years ago
- Views:
Transcription
1 Product Summary McLaren Technology Centre Chertsey Road Woking Surrey GU21 4YH UK Suite 115 Bostick Building 9801 West Kincey Avenue Huntersville NC USA 2014 Revision Date: 05 Nov 2010 Page 1 of 8
2 Available with two, three or six channels, the AIU (Accelerometer Interface Unit) is to be used with IEPE (Integrated Electronics Piezo-Electric) accelerometers and harness to provide a high-frequency/high-g signal for the High Speed Logger (HSL-500) or alternative unit. The AIU provides a constant current source to power the IEPE accelerometer. The voltage output from the IEPE is attenuated and buffered by the AIU to convert the 10V full scale measurement range to an output in the range of 0.5 to 4.5V, biased at 2.5V. AIU Application High-frequency chassis and engine vibration analysis. Supply Voltage 8 to 16V Reverse polarity protection Excitation voltage 24±0.2V Excitation current 2.45±0.1mA per channel Output voltage per channel 0.5 ±0.025V Full scale negative 2.5 ±0.025V 0g 4.5 ±0.025V Full scale positive The above tolerance does not include the sensitivity tolerance and sensitivity drift of the IEPE accelerometer Gain fixed at 0.4 AC coupled Filter characteristics: High pass Filter: -3dB at 10Hz Low pass Filter: -3dB at 4.8kHz Output impedance 100Ω Environmental HE30 aluminium alloy body, anodised and dyed blue Splash resistant to standard motorsport fluids Maximum humidity 100% Operating temperature 0 to +125 C Six-Channel AIU Supply current 12V typ Weight less than 45g Output connector: Lemo HES.1F.308.XLDP Supply Ground USA: 2014 Revision Date: 05 Nov 2010 Page 2 of 8
3 Pin 3 Output Channel 1 Pin 4 Output Channel 2 Pin 5 Output Channel 3 Pin 6 Output Channel 4 Pin 7 Output Channel 5 Pin 8 Output Channel 6 Input Connector: Lemo HEN.1F.308.XLNP Pin 3 IEPE Channel 1 Pin 4 IEPE Channel 2 Pin 5 IEPE Channel 3 Pin 6 IEPE Channel 4 Pin 7 IEPE Channel 5 Pin 8 IEPE Channel 6 Six-Channel AIU O Three-Channel AIU Supply current 12V typ Weight less than 35g USA: 2014 Revision Date: 05 Nov 2010 Page 3 of 8
4 Output connector: Lemo HES.0F.305.XLDP Supply Ground Pin 3 Output Channel 1 Pin 4 Output Channel 2 Pin 5 Output Channel 3 Input Connector: Lemo HES.0F.305.XLNP Pin 3 IEPE Channel 1 Pin 4 IEPE Channel 2 Pin 5 IEPE Channel 3 Three-Channel AIU O Two-Channel AIU Supply current 12V typ Weight less than 30g Output connector: Lemo HES.FF.304.XLDP USA: 2014 Revision Date: 05 Nov 2010 Page 4 of 8
5 Supply Ground Pin 3 Output Channel 1 Pin 4 Output Channel 2 Input Connector: Lemo HEN.FF.304.XLNP Pin 3 IEPE Channel 1 Pin 4 IEPE Channel 2 Two-Channel AIU O IEPE - Three-Axis Excitation voltage 18 to 30 VDC Constant current excitation 2 to 20mA Output impedance #200ohm Output Bias voltage 7 to 11 VDC Settling time (within 10% of bias) <3sec Performance Sensitivity: 5mV/g ±20% Measurement range: ±1000g Frequency range (±5%) Y and Z axis: 2 to 8000Hz Frequency range (±5%) X axis: 2 to 5000Hz Frequency range (+1dB) X axis: 5000 to 8000Hz Broadband resolution 1 to 10000Hz: 0.003g rms Non-linearity: 1% USA: 2014 Revision Date: 05 Nov 2010 Page 5 of 8
6 Transverse sensitivity: 5% Environmental Titanium body Operating temperature -50 to +160 C Overload limit (shock) ±10000g pk Weight less than 1g (without cable) Cable length 1500mm Interface Harnesses Teflon coated cable Harness length 1000mm ±1000g three-axis accelerometer O IEPE - One-Axis Excitation voltage 18 to 30 VDC Constant current excitation 2 to 20mA USA: 2014 Revision Date: 05 Nov 2010 Page 6 of 8
7 Output impedance #200ohm Output Bias voltage 7 to 11 VDC Settling time (within 10% of bias) <3sec Performance Sensitivity: 5mV/g ±20% Measurement range: ±1000g Frequency range (±5%): 2 to 10000Hz Frequency range (±10%) 1.5 to 15000Hz Frequency range (±3dB) 0.7 to 25000Hz Broadband resolution 1 to 10000Hz: 0.003g rms Non-linearity: 1% Transverse sensitivity: 5% Environmental Aluminium body Operating temperature -50 to +120 C Overload limit (shock) ±10000g pk Weight 0.2g typical 3-56 Coaxial Jack Interface Harnesses Teflon-coated cable Harness length 1000mm USA: 2014 Revision Date: 05 Nov 2010 Page 7 of 8
8 ±1000g one-axis accelerometer O Accessories Length AIU6 harness connects two, three-axis accelerometers AIU6 harness connects six, one-axis accelerometers AIU3 harness connects one, three-axis accelerometer AIU2 harness connects two, one-axis accelerometers AIU3 harness connects three, one-axis accelerometers 1000mm O mm O mm O mm O mm O USA: 2014 Revision Date: 05 Nov 2010 Page 8 of 8
Accelerometer Interface Unit AIU-6
Accelerometer Interface Unit AIU-6 Available with two, three or six channels, the AIU (Accelerometer Interface Unit) is to be used with IEPE (Integrated Electronics Piezo-Electric) accelerometers and harness
More informationWireless Strain Gauge System
Product Summary McLaren Technology Centre Chertsey Road Woking Surrey GU21 4YH UK Suite 115 Bostick Building 9801 West Kincey Avenue Huntersville NC 28078 USA 2014 Revision Date: 06 Aug 2009 Page 1 of
More informationK-Type Alternator. Up to 200 Amps Product Summary. McLaren Applied Technologies McLaren Technology Centre Chertsey Road Woking Surrey GU21 4YH UK
Product Summary McLaren Technology Centre Chertsey Road Woking Surrey GU21 4YH UK Suite 115 Bostick Building 9801 West Kincey Avenue Huntersville NC 28078 USA 2014 Revision Date: 24 Oct 2011 Page 1 of
More informationTemperature Sensors. Installation Note. McLaren Electronic Systems McLaren Technology Centre Chertsey Road Woking Surrey GU21 4YH UK
McLaren Technology Centre Chertsey Road Woking Surrey GU21 4YH UK McLaren Electronics Inc. Suite 115 Bostick Building 9801 West Kincey Avenue Huntersville NC 28078 USA Copyright McLaren Electronics 2012
More informationAC AC AC
AC104.01-10 AC104.01-100 AC104.01-500 Description The hermetic sealed industrial piezoelectric accelerometer model 104 is design to monitor the vibration in harsh industrial environment. It uses the industry
More informationMicroSD card 4GB, USB 1.1 cable, Integrated connector LEMO 5-pin plug to LEMO 4-pin socket,
SV 106 USER MANUAL. Appendix C. TECHNICAL SPECIFICATIONS C1. Specification of the SV106 System configuration The meter measured simultaneous in six channels with independent set of filters and detector
More informationModel 356B40. Sell 356B41. Installation and Operating Manual
Model 356B40 Sell 356B41 Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics, Inc. Toll-free: 800-828-8840 24-hour SensorLine: 716-684-0001 Fax:
More information26 Endevco Isotron accelerometers
Isotron accelerometers Typical applications > Aircraft flight testing > Ground vibration testing > Automotive ride quality testing > Product testing > Quality assurance > Research and development > Test
More informationModel 140 Inline Amplifier
Model 140 Inline Amplifier Low Noise Inline Amplifier Small Rugged Package Includes Auto-Zero Function The Model 140 is a remote in-line DC amplifier designed to be used with bridgetype mv output transducers.
More informationOPERATING GUIDE MODEL 3093M32 MINIATURE HIGH SENSITIVITY TRIAXIAL LIVM ACCELEROMETER WITH SINGLE 4-PIN CONNECTOR INTERNALLY CASE GROUND ISOLATED
Dytran Instruments, Inc. 21592 Marilla St. Chatsworth, CA 91311 Ph: 818-700-7818 Fax: 818-700-7880 www.dytran.com email: info@dytran.com OG3093M32.docx OPERATING GUIDE MODEL 3093M32 MINIATURE HIGH SENSITIVITY
More informationCONTENTS. User Manual
Document revision: Rev 1 Ref. AS-156-101 January 2013 CONTENTS 1 General... 5 2 Instrument description... 6 3 LED indicator... 7 4 Using the instrument... 7 5 Technical specification... 9 6 Dynamic performance...
More informationModel 629A31. Precision Triaxial Industrial ICP Accelerometer. Installation and Operating Manual
Model 629A31 Precision Triaxial Industrial ICP Accelerometer Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics, Inc. Toll-free: 800-959-4464
More informationModel 600A13. Very High Temperature ICP Accelerometer Kit. Installation and Operating Manual
Model 600A13 Very High Temperature ICP Accelerometer Kit Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics, Inc. Toll-free: 800-959-4464 24-hour
More informationModel 626B01. Low Frequency Industrial ICP Accelerometer. Installation and Operating Manual
Model 626B01 Low Frequency Industrial ICP Accelerometer Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics, Inc. Toll-free: 800-959-4464 24-hour
More informationSC200 Series. Signal Conditioner MNX10020, REV H 10/17/ Connection Technology Center, Inc Rae Boulevard Victor, NY (585)
SC200 Series Signal Conditioner MNX10020, REV H 10/17/2012 1 CONTENTS SECTION 1: OVERVIEW... 4 Introduction... 4 Description... 4 Ordering Information... 4 Specifications... 5 Environmental... 5 Electrical...
More informationProduct Specification File
Product Specification File Model Name: NSP-002 Product Name : VDSL Universal Splitter *Netsys reserves the right to change specifications without prior notice. 1 Revision Realized By Modification Description
More informationInstruction Manual. Charge Amplifiers. M68 Series. Manfred Weber
Instruction Manual Charge Amplifiers M68 Series Manfred Weber Metra Mess- und Frequenztechnik in Radebeul e.k. Meissner Str. 58 - D-01445 Radebeul Phone +49-351-836 2191 Fax +49-351-836 2940 Email: Info@MMF.de
More informationCSI 9330 Vibration Transmitter
Machinery Health Management O-9330-110512 Product Data Sheet November 2012 CSI 9330 Vibration Transmitter n Continuously monitors critical machinery in process applications and other industrial environments
More information9330 Vibration Transmitter
Reliability Solutions Product Data Sheet June 2017 9330 Vibration Transmitter Continuously monitors critical machinery in process applications and other industrial environments Interfaces with existing
More informationMTN/8066/G-MAC VIBRATION MODULE
Monitran Ltd. Monitor House, Hazlemere Road Penn, Bucks. HP10 8AD England Tel: +44 (0) 1494 816569 Fax: +44 (0) 1494 812256 E-Mail: info@monitran.co.uk Web Site: www.monitran.co.uk MTN/8066/G-MAC VIBRATION
More informationVariable-Gain High Speed Current Amplifier
Features Transimpedance (gain) switchable from 1 x 10 2 to 1 x 10 8 V/A Bandwidth from DC up to 200 MHz Upper cut-off frequency switchable to 1 MHz, 10 MHz or full bandwidth Switchable AC/DC coupling Adjustable
More informationASC IMU 7.X.Y. Inertial Measurement Unit (IMU) Description.
Inertial Measurement Unit (IMU) 6-axis MEMS mini-imu Acceleration & Angular Rotation analog output 12-pin connector with detachable cable Aluminium housing Made in Germany Features Acceleration rate: ±2g
More informationAero Support Ltd, 70 Weydon Hill Road, Farnham, Surrey, GU9 8NY, U.K.
4-170 Piezoelectric Accelerometer The CEC 4-170 accelerometer is a self-generating, piezoelectric accelerometer designed for medium temperature vibration measurement applications. This instrument provides
More informationPRODUCT DATA. Piezoelectric Accelerometer Miniature Triaxial DeltaTron Accelerometers Types 4524, 4524 B
PRODUCT DATA Piezoelectric Accelerometer Miniature Triaxial DeltaTron Accelerometers Types 4524, 4524 B Types 4524 and 4524 B are lightweight triaxial piezoelectric OrthoShear accelerometers, each with
More informationCSG110 Strain Gauge Universal Amplifier
Quick Start Guide CSG110 Strain Gauge Universal Amplifier Sensor Solutions Source Load Torque Pressure Multi-Axis Calibration Instruments Software www.futek.com Getting Help TECHNICAL SUPPORT For more
More informationVariable Gain Sub Femto Ampere Current Amplifier
Features 0.4 fa Peak-Peak Noise Very High Dynamic Range: Sub-fA to 1 ma (> 240 db) Transimpedance (Gain) Switchable from 1 x 10 4 to 1 x 10 13 V/A Bandwidth up to 400 Hz, Rise Time Down to 0.8 ms - Independent
More informationVIBRATION SENSOR WITH TWO-WIRE INTERFACE AND BIAS USED FOR MEASURE TEMPERATURE
VIBRATION SENSOR WITH TWO-WIRE INTERFACE AND BIAS USED FOR MEASURE TEMPERATURE George Zusman Vibration Measurement Solutions, Inc. Houston, TX 77077 832-277-307- zusger@gmail.com Abstract: A sensor with
More informationSCM5B48 ACCELEROMETER INPUT MODULE USER S MANUAL
SCM5B48 ACCELEROMETER INPUT MODULE USER S MANUAL Section Description Page 1.0 Introduction 1 2.0 CE Compliance 1 3.0 Features and theory of operation 1 4.0 The High Pass filter and the Low Pass Bessel
More informationLap Triggers. Application Note. McLaren Electronic Systems McLaren Technology Centre Chertsey Road Woking Surrey GU21 4YH UK
McLaren Technology Centre Chertsey Road Woking Surrey GU1 YH UK McLaren Electronics Inc. Suite 11 Bostick Building 9801 West Kincey Avenue Huntersville NC 8078 USA Copyright McLaren Electronics 01 Revision
More informationSensors for Vibration, Acceleration, and Shock Measurement. Product Catalog
Sensors for Vibration, Acceleration, and Shock Measurement Product Catalog Company Overview VISONG TEST is a Sino-US joint venture specialized in the field of vibration transducer and dynamic measurement
More informationInnovation in Magnetic Field Measuring Instruments. High Temperature Fluxgate Probes
Innovation in Magnetic Field Measuring Instruments High Temperature Fluxgate Probes High Temperature Fluxgate Probes Bartington High Temperature Three-Axis Fluxgate Probes Designed to survive high levels
More informationOperation and Service Manual. 350 MHz Preamplifier SIM914. Stanford Research Systems
Operation and Service Manual Stanford Research Systems Revision 1.8 August 24, 2006 Certification Stanford Research Systems certifies that this product met its published specifications at the time of shipment.
More informationLOW COST SDI 2210, 2260 & 2266 HIGH PERFORMANCE SDI 2220 & 2276
LOW COST & HIGH PERFORMANCE 1-AXIS DC ACCELEROMETER MODULES Low Noise: 10 μg Hz Typical for ±2g Full Scale Versions -55 to +125 C Operating Temperature Range Flexible +8 to +32 VDC Power Excellent Long
More informationHILNA LS Low Noise Amplifier
HILNA LS Low Noise Amplifier 1000-3000 MHz 50 db Gain P/N: HILNA-LS (includes NW-LN-ACC-CB4MUA interface cable) NuWaves HILNA LS is a broadband low noise amplifier covering L- & S-bands, and designed to
More informationBumbleBee. High Voltage Differential Probe Ord.-No: Features:
High Voltage Differential Probe Ord.-No: 880-102-501 Features: 2000 V rms Measurement Category I, 6000 V transient Overvoltage 1000 V CAT III 400 MHz Bandwidth < 1 % Deviation within Specified Operating
More informationRevision 1.b Release Date July 29, 2007 This data sheet covers models 4379, 4472 Revision Notes Repl 0.d (Rev p/n 250W, B version of Comb)
Part Number Revision 1.b Release Date July 29, 2007 This data sheet covers models 4379, 4472 Revision Notes Repl 0.d (Rev p/n 250W, B version of Comb) Amplifier Name Technical Specifications Summary Frequency
More informationVM2000. Low-Noise Bottom Port Piezoelectric MEMS Microphone Data Sheet Vesper Technologies Inc. Differential Analog Output
VM2000 2017 Data Sheet Vesper Technologies Inc. Low-Noise Bottom Port Piezoelectric MEMS Microphone VM2000 Vesper offers the world s first differential analog piezoelectric MEMS microphone. VM2000 provides
More informationTyre Pressure Monitoring System Infra-Red Array
Tyre Pressure Monitoring System Infra-Red Array The system consists of a powered pressure and IR temperature array sensor with transmitter fitted to a wheel rim. This sends pressure and temperature data
More information1443 Series Accelerometers Specifications
Technical Data 1443 Series Accelerometers Specifications Catalog Numbers 1443-ACC-GP series, 1443-ACC-VO series, 1443-ACC-IS series, 1443-ACC-AT series, 1443-ACC-LF-T, 1443-ACC-HF-T Topic Page Sensor Selection
More informationAcceleration sensors With relay output for limit monitoring Analog / CANopen
Features Acceleration sensor / analog / CANopen Up to two relay outputs for limit monitoring 3 axes detection, MEMS based Measuring range ±2 g Connection: connector M12, 12-pin Offshore capability (plastic
More informationCable transducer Analog output / redundant Measuring length absolute up to 5 m
Features Magnetic sensing method Resolution: 12 bit Interface analog 0...10 V / 0.. V /...20 ma Measuring length up to m Removable stickers for water outlet Teach inputs Extremely light thanks to housing
More informationTel: (949) Fax: (949) IAA100 Product Manual
IAA100 Product Manual Table of Contents Default Settings... 3 Connections... 3 Standard Span & Zero Adjustment... 4 Shunt Readings... 5 Digitally Controlled Remote Shunt... 5 Switch Configurations... 6
More informationsupplies and frequency converters. BumbleBee is also very effective in fast transient measurements
High Voltage Differential Probe Order-No: 880-102-501 Features: 1000 V CAT III 400 MHz Bandwidth < 1 % Deviation within Specified Operating Temperatures (0 C to +50 C) High CMRR 4 Mode Attenuation Useable
More informationHILNA V1 Low Noise Amplifier
HILNA V1 Low Noise Amplifier 50-1000 MHz db Gain P/N: HILNA-V1 (includes NW-LN-ACC-CB02CA interface cable) NuWaves HILNA V1 is the first in its class of broadband low noise amplifiers designed to achieve
More informationMaterial: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:
More informationPrecision 28918A 8-Channel CVLD/IEPE Conditioner
On the New Frontiers of Precision Precision 28918A 8-Channel CVLD/IEPE Conditioner The 28918A 8-Channel CVLD/IEPE Conditioner is a member of the Precision 28 family of signal conditioners. The 28918A provides
More informationHigh Temperature Fluxgate Probes
INNOVATION IN MAGNETICS DS3629/3 High Temperature Fluxgate Probes www.bartington.com High Temperature Fluxgate Probes High Temperature Three-Axis Fluxgate Probes Designed to survive high levels of shock
More informationFeatures. = +25 C, Vdc = +7V
amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -7 dbc/hz @ khz Noise Figure: 6 db Gain:
More informationHigh Sensitivity Triaxial CCLD Accelerometer Type 4506-B-003
P R O D U C T DATA High Sensitivity Triaxial CCLD Accelerometer Type 4506-B-003 Type 4506-B-003 is a high sensitivity triaxial piezoelectric CCLD* accelerometer. The accelerometer is housed in robust titanium
More informationIonization Chamber Controller with Integrated HV Supply
Ionization Chamber Controller with Integrated HV Supply Features Dynamic range
More informationHILNA GPS Low Noise Amplifier
HILNA GPS Low Noise Amplifier 1200-1600 MHz 32 db Gain P/N: HILNA-GPS (includes NW-LN-ACC-CB02CA interface cable) NuWaves HILNA GPS is a broadband low noise amplifier designed to achieve high gain while
More informationModule Input type Ranges TEDS Filters (LP = lowpass, HP = highpass) Piezoresistive bridge ±0.5 to mv/ma 1 ma exc
HSI Series Modules Selection Guide HSI Series Modules Single channel High bandwidth - for dynamic signals Isolation (all models Analog signal output (±5 V Single channel modularity For DEWETRON systems
More informationProtection class IP67/IP69K Magnetic measurement principle
POSITILT PTAS2 Magnetic inclination sensor with analog output Magnetic inclination sensor in a 36 mm housing Protection class IP67/IP69K Magnetic measurement principle Outputs: Voltage 0.5... 4.5 V; 0.5...
More information4-20 ma Vibration Transmitter, Top connector
4-20 ma Vibration Transmitter, Top connector Main Characteristics Atex Approved for zone 0, 1, 2. Can monitor machine as low as 180 RPM. Annular shear mode (better than obsolete compression design) Velocity
More informationSDI SPECTRADYNAMICS, INC. HIGH PERFORMANCE DISTRIBUTION AMPLIFIER OPERATING MANUAL
SPECTRADYNAMICS, INC. HIGH PERFORMANCE DISTRIBUTION AMPLIFIER HPDA15RMC OPERATING MANUAL SPECTRADYNAMICS, INC 1849 Cherry St. Unit 2. Louisville, CO 80027 Phone: (303) 6651852 Fax: (303) 6046088 www.spectradynamics.com
More informationIncremental encoders Blind or through hollow shaft ø12 mm pulses per revolution
Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting
More informationVehicle & Component Durability Sensors Accelerometers, Load Cells, Force Sensors, and Signal Conditioners
WWW.PCB.COM Vehicle & Component Durability Sensors Accelerometers, Load Cells, Force Sensors, and Signal Conditioners Automotive Sensors Division Toll-Free in USA 888-684-0014 716-684-0001 www.pcb.com
More informationApplication Specification Accelerometer ACH AUG 98 Rev A
Application Specification Accelerometer ACH-04-08-05 114-27002 27 AUG 98 Rev A 1.0 INTRODUCTION This specification covers the application requirements of Measurement Specialties Accelerometer ACH-04-08-05.
More information100W Power Amplifier 8GHz~11GHz
100W Power Amplifier 8GHz~11GHz High output power +50dBm Aerospace and military application X band radar High Peak to average handle capability All specifications can be modified upon request Parameter
More informationKistler LabAmp for DynoWare
Electronics & Software Kistler LabAmp for DynoWare Charge Amplifier and Data Acquisition for Multicomponent Force Measurement This instrument is ideal for multicomponent force-torque measurement with piezoelectric
More informationMeasurement range. Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( )
Magnetic Angle Sensor with Analog Output Magnetic Angle Sensor 0-360 Measurement range 0-360 Protection class IP67 Analog output Compact, low profile housing Non-contact with external position magnet Wear
More informationProtection class IP67/IP69K Magnetic measurement principle
POSITILT PTAS2 Magnetic inclination sensor with analog output Magnetic inclination sensor in a 36 mm housing Protection class IP67/IP69K Magnetic measurement principle Outputs: Voltage 0.5... 4.5 V; 0.5...
More informationHP 34401A Specifications 8
8 HP 34401A Specifications 8 DC Characteristics DC Characteristics Accuracy Specifications ± ( % of reading + % of range ) [ 1 ] Function Range [ 3 ] Test Current or Burden Voltage 24 Hour [ 2 ] 23 C ±
More informationVariable Gain Photoreceiver - Fast Optical Power Meter
The picture shows model -FC with fiber optic input. Features Conversion gain switchable from 1 x 10 3 to 1 x 10 11 V/W InGaAs-PIN detector Spectral range 900-1700 nm Calibrated at 1550 nm (fiber optic
More informationDatasheet C400. Four Channel Pulse Counting Detector Controller
Four Channel Pulse Counting Detector Controller Features Four independent channels with fast discriminators, scalers, preamp power and high voltage. Able to control photomultipliers and APDs. 10 nsec pulse
More informationVI TELEFILTER Filter Specification TFS 246 H4 1/5
Filter Specification TFS 246 H4 1/5 Measurement condition Ambient temperature: 2 C Input power level: 0 dbm Terminating impedances *) Input: 490 Ω -2.62 pf Output: 490 Ω -2.62 pf External coil: 270 nh
More information2018 Data Sheet Vesper Technologies Inc. VM1000. Low-Noise Bottom Port
2018 Data Sheet VM1000 Low-Noise Bottom Port ACE Awards Winner Annual Creativity In Electronics 2016 VM1000 The VM1000 is a low noise, high dynamic range, single ended analog output piezoelectric MEMS
More informationIntegrated Dual-Axis Gyro IDG-1215
Integrated Dual-Axis Gyro FEATURES Integrated X- and Y-axis gyros on a single chip ±67 /s full-scale range 15m/ /s sensitivity Integrated amplifiers and low-pass filter Auto Zero function Integrated reset
More informationOperation. Displayed channel. Measuring range. Status indication/ remote control Key lock Measuring mode/ time constant. Scale.
Electronics & Software Type 5080A... Multichannel Laboratory This universal laboratory charge amplifier can be used for force and torque measurements with piezoelectric dynamometers or force plates. Piezoelectric
More informationNDR6110 Single Channel Dynamic Driver for Piezoelectric Actuators
NDR61 Driver Series NDR6110 Single Channel Dynamic Driver for Piezoelectric Actuators Features Bipolar and unipolar output load Galvanic separation of the output Adjustable input range and phase inversion
More informationSMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
More informationCE620. Piezoelectric accelerometer with integrated electronics. IECEx
Piezoelectric accelerometer with integrated electronics FEATURES» From the Vibro-Meter product line» Voltage output signal: 100 or 500 mv/ g» Frequency response: 2 Hz to 10 khz» Temperature range: 55 to
More informationTfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit
Filter specification TFS 248 E 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances at f c *) Input: 560 Ω -5.9pF Characteristics Output: 500 Ω -6.3 pf Remark:
More informationPNRRKIT. Portable Networked Re-Radiating Kit Technical Product Data. Features. Description. Utilizes Existing Roof Antenna
PNRRKIT Portable Networked Re-Radiating Kit Technical Product Data Features Utilizes Existing Roof Antenna Re-Radiating Amplifier with Power Supply Typical Gain 30dB Optional Mounting Kit Hardware Adjustable
More informationPV 102. IECEx. Piezoelectric velocity sensor FEATURES. From the Vibro-Meter product line
FEATURES From the Vibro-Meter product line Designed for medium temperature industrial applications: 50 to +120 C ( 58 to +248 F) Frequency response: 6.0 to 2500 Hz: ±10 % to 5000 Hz: ±3 db Ultra low-noise
More informationVariable-Gain High Speed Current Amplifier
Features Transimpedance (Gain) Switchable from 1 x 10 2 to 1 x 10 8 V/A Bandwidth from DC up to 200 MHz Upper Cut-Off Frequency Switchable to 1 MHz, 10 MHz or Full Bandwidth Switchable AC/DC Coupling Adjustable
More informationVI TELEFILTER Filter Specification TFS 211 C 1/5
Filename: tfs211c.doc version 3.0 23.01.2002 Filter Specification TFS 211 C 1/5 Measurement condition Ambient temperature: 20... 25 C Input power level: 5 ± 2 dbm terminating impedances * Input: 1,1 kω
More informationCal-Chip Electronics, Inc.
Cal-Chip Electronics, Inc. Feature: These new SSL Series is designed for the smallest possible size, low cost and high performance. It's high energy storage and very low DC resistance offer higher saturated
More information9W Power Amplifier 26.2GHz~34GHz
9W Power Amplifier 26.2GHz~34GHz High output power > +39.5 dbm Aerospace and military application High Peak to average handle capability High Linearity and low noise figure All specifications can be modified
More informationIncremental hollow shaft encoder BRIH EcoMag
Incremental hollow shaft encoder BRIH EcoMag features miniaturized hollow shaft encoder with wide pulse range radial cable connection or connector end shaft mounting up to mm general data voltage supply
More informationDC-20 GHz Distributed Driver Amplifier. Parameter Min Typ Max Min Typ Max Units
7-3 RF-LAMBDA DC-20 GHz Distributed Driver Amplifier Electrical Specifications, T A =25 Features Ultra wideband performance Positive gain slope High output power Low noise figure Microwave radio and VSAT
More information4662 P250-UHF-14-A. Frequency Range: MHz. Efficiency: 38% Temperature Range: -10 to 55 C Max VSWR: 3:1. Supply Voltage: 32.
Part Number Revision 0.B Release Date November 5, 2007 This data sheet applies to models 4662, 4978 Revision Notes Updated Mechanical information. Revised Specification (formal production release) Amplifier
More information2. Avoid metal objects coming into contact with this product. Protect the solder joints on the bottom of the PCB when mounting this product.
User s Guide and Specifications AMP2X15 Audio Amplifier Board PUI Audio s AMP2X15 audio amplifier board features a Texas Instruments TPA3110D2 Class D amplifier circuit for maximum signal fidelity; delivering
More informationFeatures wideband coverage, DC to 6000 MHz 2 watt rating rugged unibody construction off-the-shelf availability very low cost
Coaxial SMA Fixed Attenuator 50Ω 2W 7dB DC to 6000 MHz Maximum Ratings Operating Temperature -45 C to 100 C Storage Temperature -55 C to 100 C Permanent damage may occur if any of these limits are exceeded.
More informationAN5E Application Note
Metra utilizes for factory calibration a modern PC based calibration system. The calibration procedure is based on a transfer standard which is regularly sent to Physikalisch-Technische Bundesanstalt (PTB)
More informationFour-channel Digital Electrometer for Quadrant BPM Readout
Four-channel Digital Electrometer for Quadrant BPM Readout Features Four independent integrator channels with common gate Dynamic range
More informationParameter Min Type Max Units Frequency Range GHz Small Signal Gain,S21 18 db. Input Return Loss,S11 10 db Output Return Loss,S22 7 db
High output power >+33dBm Applicable for base station,repeaters of cellular network Aerospace and military application LMDS multi carrier operation High peak to average handle capability High Linearity
More information731A seismic accelerometer and P31 power unit/amplifier Operating guide
731A seismic accelerometer and P31 power unit/amplifier Operating guide Caution: This manual should be read carefully before installation. Wilcoxon Sensing Technologies 8435 Progress Drive, Frederick,
More informationVariable Gain Low Frequency Voltage Amplifier
Features Applications 20 to 80 db, Switchable in 20 db Steps Bipolar Input Stage, Recommended for Low Impedance Sources Smaller than 1 kω Single Ended and True Differential Input Models Bandwidth DC -
More informationCondition Monitoring Custom Products
CMCP500 Series Transmitters/Monitors Low Cost Din rail mount 4-20 ma output Sensor fault detection Buffered transducer output Optional filters Alert, Danger & OK Alarms and Relays Trip Multiply Remote
More informationRF FRONT-END FOR SYSTEM INTEGRATORS
RF-6G RF FRONT-END FOR SYSTEM INTEGRATORS Operating instructions AOR, LTD. Table of contents 1. INTRODUCTION. 2 2. MAIN FEATURES 3 3. TAKE CARE OF YOUR UNIT 4 4. INCLUDED IN THIS PACKAGE 5 5. FRONT PANEL
More informationPRODUCT DATA. DC Response Accelerometers Types 4570, 4571, 4572, 4573, 4574, and 4575
PRODUCT DATA DC Response s Types 4570, 4571, 4572, 4573, 4574, and The DC Response s are designed to measure low-frequency vibration down to DC. The gasdamped sensing element offers a wide dynamic range
More informationSURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES GRF300 GRF300D GRF300DD GRF303 GRF303D GRF303DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil transient
More information20W Solid State Power Amplifier 6-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 20W Solid State Power Amplifier 6-18GHz Electrical Specifications, TA = +25⁰C Vcc = +36V Features Psat: + 43.5dBm Gain: 51 db Supply Voltage: +36V 50 Ohm Matched Short Haul / High Capacity
More information4454 P500-UHF-17-A. Frequency Range: MHz. Efficiency: 36% Temperature Range: -10 to 55 C Max VSWR: 3:1. Supply Voltage: 32.
Part Number Revision 0.e Release Date December 13, 2007 This document applies to 4454 and 5029 Revision Notes: 0.b Full production release, Apr 07. 0.c Revised Specs May 07. Revised Integration Instructions
More informationAbsolute encoders - analog Blind hollow shaft ø12 mm Magnetic single- or multiturn encoders 12 bit ST / 16 bit MT
Blind hollow shaft ø mm Magnetic single- or multiturn encoders bit ST / bit MT BMSH 8, BMMH 8 analog - MAGRES Features Encoder single- or multiturn / analog Magnetic sensing Resolution: singleturn bit,
More informationULTRAVOLT AA SERIES HIGH VOLTAGE BIASING SUPPLIES
ULTRAVOLT AA SERIES HIGH VOLTAGE BIASING SUPPLIES DC-DC single-output PCB-mount high voltage modules Page 2 The AA series consists of high voltage, miniature PCBmount, regulated DC-DC converters. Designed
More informationdbm Supply Current (Idd) (Vdd=+36V)
Ka Band 6W Power Amplifier 28GHz~42GHz High output power Aerospace and military application High Peak to average handle capability High Linearity and low noise figure All specifications can be modified
More informationRAMSES SERIES R 570 PART NUMBER SELECTION. SPDT up to 18 GHz. Our Most Important Connection is with You. N - TNC - BNC
SPDT up to 18 GHz PART NUMBER SELECTION Frequency Range: 0: N up to 3 GHz 1: N up to 12.4 GHz 2: BNC up to 3 GHz 5: TNC up to 3 GHz 6: TNC up to 12.4 GHz D: TNC up to 18 GHz Type: 1: Failsafe 2: Failsafe
More informationFast Tip/Tilt Platform
Fast Tip/Tilt Platform Short Settling Time and High Dynamic Linearity S-331 Tip/tilt angle up to 5 mrad, optical deflection angle up to 10 mrad (0.57 ) Parallel-kinematic design for identically high performance
More information