PRODUCTION ELECTRONIQUE Inc. 1035, rue Pierre Caisse Saint Jean sur Richelieu (Québec) CANADA J2W 0G9 : : :

Transcription

1

2 PRODUCTION ELECTRONIQUE Inc. 1035, rue Pierre Caisse Saint Jean sur Richelieu (Québec) CANADA J2W 0G9 : : : pe@productionelectronique.com

3 MOBILE ANTENNAS Molded Base Antennas BMAX Molded Base Antennas These antennas feature a rugged molded polymer base, plated spring-loaded contact pin and.100 diameter stainless steel whip for long-lasting, troublefree operation. s are available with open or closed coil rod, and can be ordered in all black finish. This series offers models for many types of wireless applications, including WiFi and WiMAX mobility, VHF and UHF land mobile radio, 700 Public Safety, 800 MHz and 900 MHz digital radio and AMPS/PCS voice/data support. Molded polymer base provides ruggedness and durability in harsh mobile environments. Wideband performance (Wi-Fi and WiMAX models) provide coverage of 2.2 GHz to 2.9 GHz frequencies without tuning. WiMAX model covers GHz frequencies. 3 db or 5 db models available for most frequency ranges Most models available in bright chrome or black finish Antenna is ready to install; no rod cutting is required (unless otherwise noted) Designed to mate with all 1-1/8-18 thread mounts, including 3/4 mounts Spring-loaded gold plated contact pin (B) MAXMFT (B) MAX150/450 (B) MAX455 Technical Data Maximum Power: 200 watts(vhf models) 150 watts (UHF models) 100 watts (all other models) Polarization: Vertical Nominal Impedance: 50 ohms VSWR at Resonance: < 1.5:1 (Most models, except as noted below) < 1.9:1 (MAX7635S only) < 2.0:1 [(B)MAX150/450(S) and (B)MAX140/440(S)] Radiator Material:.100 OD stainless steel; bright (MAXC) or black finish (BMAXC).062 diameter black stainless steel Spring: Stainless steel; bright or black finish (not all options available with every model) Base Coil Housing: Molded polymer with a plated insert ring and a spring-loaded contact pin Phasing Coil Housing: Molded polymer jacket with copper, nickel and chrome plated bushing Rod Ferrule: 5/16-24 thread; bright or black chrome plated finish Mount Method: Mates with all 1-1/8-18 thread mounts, including 3/4 mounts BMAX824/1850 (B) MAXSCAN1000 BMAX8155S BMAXC BMAXC Antennas

4 MOBILE ANTENNAS Molded Base Antennas Antenna Electrical Specifications Frequency Range Factory Tuned Frequency Gain Rod Type (B) MAXMFT(S)* MHz Field Tunable Unity Straight (B) MAX150D(S)* MHz 160 MHz Unity Collinear/Open BMAX150/450(S)* MHz/ MHz 160/460 MHz Unity Collinear/Closed MAXSCAN1000(S)* MHz/ MHz/ MHz 160 MHz/460 MHz/n/a Unity Collinear/Closed B MAXSCAN MHz/ MHz/ MHz 160 MHz/460 MHz/n/a Unity Collinear/Closed MAX MHz Field Tunable 5 db Collinear/Closed (B) MAX7603S* MHz 815 MHz 3 db Collinear/Open BMAX7633S* MHz 815 MHz 3 db Collinear/Closed (B) MAX7635S* MHz Broadband** 5 db Trilinear/Closed (B) MAX8055(S)* MHz 815 MHz 5 db Trilinear/Closed B MAX8033(S)* MHz 835 MHz 3 db Collinear/Closed (B) MAX8053(S)* MHz 835 MHz 3 db Collinear/Open BMAX8155S* MHz Broadband** 4.5 db Collinear/Closed BMAX824/1850* MHz/ MHz Broadband** 2.2 dbi/4 dbi Collinear/Open (B) MAX8375(S)* MHz 835 MHz 5 db Trilinear/Closed BMAX9105(S)* MHz 898 MHz 5 db Trilinear/Closed MAX MHz 898 MHz 5 db Trilinear/Closed BMAX9155S* MHz Broadband** 4.0 db Collinear/Closed MAX MHz 896 MHz 3 db Collinear/Open MAX MHz 896 MHz 5 db Trilinear/Open (B)MAX9085S* MHz 896 MHz 5 db Trilinear/Closed (B) MAXC24503* GHz Broadband** 3 dbi Collinear/Closed (B) MAXC24505* GHz Broadband** 5 dbi Collinear/Closed BMAXC233805* GHz Broadband** 5 dbi Collinear/Closed * Prefix B indicates black. Suffix S indicates spring. ** Optimized across the entire specified frequency range.

5 MOBILE ANTENNAS Molded Base Antennas Mechanical Specifications Antenna Height at lowest frequency Antenna Type (B) MAXMFT(S) Approximately 26 1/4 wave (B) MAX150D(S) Approximately 17 1/4 wave BMAX150/450(S) Approximately 20 1/4 wave/collinear array MAXSCAN1000(S) Approximately 21 1/4 wave or Collinear array (B) MAXSCAN1000 Approximately 21 1/4 wave or Collinear array MAX455 Approximately 33 5/8 wave over a 1/2 wave (B) MAX7603S Approximately 14 Wideband collinear BMAX7633S Approximately 14 Wideband collinear (B) MAX7635S Approximately 25 Dual 1/2 wave over a 1/4 wave (B) MAX8055(S) Approximately 24 Dual 1/2 wave over a 1/4 wave B MAX8033(S) Approximately 13 5/8 wave over a 1/4 wave (B) MAX8053(S) Approximately 13 5/8 wave over a 1/4 wave BMAX8155S Approximately 13 Collinear array BMAX824/1850 Approximately 12 Dual Band Collinear MAX8375 Approximately 13 5/8 wave over a 1/4 wave B MAX9105(S) Approximately 23 Dual 1/2 wave over a 1/4 wave MAX9105 Approximately 23 Dual 1/2 wave over a 1/4 wave BMAX9155S Approximately 13 Collinear array MAX9053 Approximately 11 5/8 wave over a 1/4 wave MAX9075(S) Approximately 23 Dual 1/2 wave over a 1/4 wave (B)MAX9085(S) Approximately 23 Dual 1/2 wave over a 1/4 wave (B) MAXC ( mm) ISM mobile and WLAN (B) MAXC ( mm) ISM mobile and WLAN BMAXC (12.06 cm) WiMAX mobile

6 PRODUCTION ELECTRONIQUE Inc. 1035, rue Pierre Caisse Saint Jean sur Richelieu (Québec) CANADA J2W 0G9 : : : pe@productionelectronique.com

7 MOBILE ANTENNAS Base Loaded Antennas Base Loaded Field Tunable 3dB Gain Antennas These 5/8 Wave antennas utilize a chrome coil design with the enhancement of a heavy duty tapered rod for maximum durability in tough environments. The matching coil is supported by a low loss coil for superior performance in heavy shick applications The tapered coil housing design enhances appearance and prevents moisture from entering the load Mates with all 1-1/8-18 thread mounts, including 3/4 mounts MHBDC5800 MUF4503 Technical Data MHB5800 Maximum Power: 200 watts Nominal Impedance: 50 ohms VSWR at Resonance: < 1.5:1 Radiator Material: diameter stainless steel Grounding: DC Grounded (MHBDC model only) Optional Spring: Stainless steel Base Coil Housing: Molded polymer jacket with copper, nickel and chrome plated bushing Antenna Type: Base loaded 5/8 Wave Electrical Specifications Frequency Range Factory Tuned Frequency Gain MHB (S) MHz Field tunable 3 db MHBDC5800(S)** MHz Field tunable 3 db MHB5800(S) MHz Field tunable 3 db MUF4503(S) MHz Field tunable 3 db Mechanical Specifications Antenna Height at lowest frequency MHB (S) Approximately 58 MHBDC5800(S)** Approximately 52 MHB5800(S) Approximately 52 MUF4503(S) Approximately 16 Suffix S indicates spring and is not a retrofit option, please indicate at time of order. ** MHBDC5800(S) has a 5 MHz 1.5:1 VSWR. This is a DC grounded antenna

8 MOBILE ANTENNAS Base Loaded No Ground Plane Antennas VHF Base Loaded Chrome Coil Antenna, No Ground Plane Designed for installations that lack a suitable ground plane, the MHB5802(S) antenna features a ta pered loading coil jacket with chrome plated fittings and an optional heavy-duty stainless steel spring. The base loaded matching network supports the collinear or trilinear rod sections above without the need of a ground plane. No ground plane required Rugged construction; optional heavy-duty shock spring Sleek, sturdy, sealed phasing coil design Mates with all 1-1/8-18 thread mounts, including 3/4 mounts Antenna Electrical Specifications MHB5802(S)* Frequency Range MHz Factory Tuned Frequency Field tunable within specified frequency range Gain Unity no ground plane (2.4 db with a ground plane) MHB5802S Mechanical Specifications Technical Data Antenna Height at lowest frequency MHB5802(S)* Approximately 52 Maximum Power: 200 watts Nominal Impedance: 50 ohms VSWR at Resonance: < 1.5:1 Radiator Material: diameter tapered Optional Spring: Stainless steel Base Coil Housing: Molded polymer jacket with copper, nickel and chrome plated bushing Antenna Type: Base loaded 1/2 Wave *Suffix S (Spring) is not a retrofit option, please indicate at time of order.

9 MOBILE ANTENNAS Quarterwave Antennas Lowband Full Length Quarter Wave Antenna This is a rugged full length Quarter Wave for lowband applications. It features a high quality stainless steel shock spring. The ultimate in durability for lowband applications Stainless steel construction 96 tapered stainless steel whip Adjustable, die cast zinc mount Antenna Electrical Specifications Frequency Range Factory Tuned Frequency Gain MLB MHz Field Tunable Unity MLB3001 Mechanical Specifications Antenna Height at lowest frequency MLB3001 Approximately 105 Technical Data Maximum Power: 250 watts Nominal Impedance: 50 ohm VSWR at Resonance: < 1.5:1 Radiator Material: diameter tapered stainless steel Spring: Stainless steel Cable Options: MK20 (20 cable) complete with spade lugs installed, and loose solder on PL259 connector. Mounting Base: 3-1/2 diameter Antenna Type: Full length 1/4 wave *Spring assembly included

10 MOBILE ANTENNAS Quarterwave Antennas Lowband Quarter Wave Antennas The MLB lowband antennas are a popular choice for State Patrol, Land Management and serious CB applications. They provide superior performance for a variety of lowband applications. The matching coil is supported by a low-loss coil form to withstand the heaviest shocks (all models, except MLB6600S) Durable, attractive housings designed to deter moisture ingress for long lasting, reliable operation. Mates with all 1-1/8-18 thread mounts, including 3/4 mounts Antenna Electrical Specifications Frequency Range Factory Tuned Frequency Gain MLB2700(S) MHz Field Tunable within specified range Unity MLBDC2700(S)** MHz Field Tunable within specified range Unity MLB3000(S) MHz Field Tunable within specified range Unity MLBDC3000(S)** MHz Field Tunable within specified range Unity MLBDC3400(S)** MHz Field Tunable within specified range Unity MLB3400(S) MHz Field Tunable within specified range Unity MLBDC3700(S)** MHz Field Tunable within specified range Unity MLB4000(S) MHz Field Tunable within specified range Unity MLBDC4000(S)** MHz Field Tunable within specified range Unity MLBDC4500(S)** MHz Field Tunable within specified range Unity MLBDC4700(S)** MHz Field Tunable within specified range Unity MLB4700(S) MHz Field Tunable within specified range Unity MLB6600(S) MHz Field Tunable within specified range Unity Mechanical Specifications Antenna Height at lowest frequency All models Approximately 52 *Suffix S indicates spring ** This model is DC grounded MLB4700 Technical Data MLB6600 Maximum Power: 200 watts 500 watts (MLBDC models) Nominal Impedance: 50 ohm VSWR at Resonance: < 1.5:1 Radiator Material: diameter tapered stainless steel Optional Spring: Stainless steel Loading Coil: Tinned copper wire wound on a low-loss coil form (All models, except MLB6600S) Base Coil Housing: Molded polymer with copper, nickel and chrome plated bushing Lightening Protection: DC grounded (MLBDC models only) Antenna Type: Base loaded tapped 1/4 wave (MLBDC models) Full length 1/4 wave (MLB6600S) Base loaded 1/4 wave (MLB models)

11 Heavy Duty Low Profile Base Gain Antennas These antennas feature a heavy-duty low profile base with tapered loading coil jacket, chrome plated brass fittings and an optional heavy-duty stainless steel spring. Available with either an open coil rod or our quiet closed coil rod design. Low profile double-sealed housing for maximum weather-proofing Plated fittings for superior performance and durability in the toughest environments Mates with all 1-1/8-18 thread mounts, including 3/4 mounts MOBILE ANTENNAS Base Loaded Unity and Gain Antennas Electrical Specifications Frequency Range Factory Tuned Frequency Gain Rod/Coil Type MUF3505(S) MHz 5 db Collinear/Closed MUF4065(S) MHz Antennas are field tunable 5 db Collinear/Closed MUF4305(S) MHz within the 5 db Collinear / Closed MUF4505(S) MHz specified 5 db Collinear/Closed MUF4705(S) MHz frequency range. 5 db Collinear/Closed MUF4905(S) MHz 5 db Collinear/Closed MUF8105(S) MHz 815 MHz 5 db Trilinear/Open MUF8005(S) MHz 815 MHz 5 db Trilinear/Closed MUF8103(S) MHz 815 MHz 3 db Collinear/Open MUF8003(S) MHz 815 MHz 3 db Collinear/Closed MUF8325(S) MHz 835 MHz 5 db Trilinear/Closed MUF9035(S) MHz 898 MHz 5 db Trilinear/Closed Mechanical Specifications Antenna Length at lowest frequency MUF3505(S) Approximately 32 MUF4065(S) Approximately 32 MUF4305(S) Approximately 32 MUF4505(S) Approximately 32 MUF4705(S) Approximately 32 MUF4905(S) Approximately 32 MUF8105(S) Approximately 25 MUF8005(S) Approximately 25 MUF8103(S) Approximately 15.5 MUF8003(S) Approximately 15.5 MUF8325(S) Approximately 25 MUF9035(S) Approximately 25 MUF4505 Technical Data MUF8103 Maximum Power: 200 watts Nominal Impedance: 50 ohms VSWR at Resonance: < 1.5:1 Radiator Material:.100 diameter stainless steel Optional Spring: Stainless steel Phasing Coil Housing: Low profile molded polymer jacket with copper, nickel and chrome plated bushing Base Coil Housing: Low profile molded polymer with copper, nickel and chrome plated bushing Antenna Type: 3 db: 5/8 wave over a 1/4 wave 5 db: 5/8 wave over a 1/4 wave Suffix S indicates spring option.

12 MOBILE ANTENNAS Base Loaded No Ground Plane Antennas Base Loaded Chrome Coil Antennas, No Ground Plane Designed for installations that lack a suitable ground plane, these antennas feature a ta pered loading coil jacket with chrome plated fittings and an optional heavy-duty stainless steel spring. The base loaded matching network supports the collinear or trilinear rod sections above without the need of a ground plane. No ground plane required Rugged construction; optional heavy-duty shock spring Sleek, sturdy, sealed phasing coil design Mates with all 1-1/8-18 thread mounts, including 3/4 mounts Electrical Specifications Frequency Range Factory Tuned Frequency Gain with/without Ground Plane Rod/Coil Type MUF4505NGP(S) MHz Field tunable 5 db/3 db Collinear/Closed MUF8103NGP MHz 815 MHz 3 db Collinear/Open MUF8003NGP(S) MHz 815 MHz 3 db Collinear/Closed MUF9000NGP MHz 898 MHz Unity Straight MUF9103NGP MHz 898 MHz 3 db Collinear/Open MUF9035NGPS MHz 898 MHz 5 db Trilinear/Closed MUF9025NGPS MHz 915 MHz 5 db Trilinear/Open Mechanical Specifications Antenna Height at lowest frequency MUF4505NGP(S) Approximately 33 MUF8103NGP Approximately MUF8003NGP(S) Approximately MUF9000NGP Approximately MUF9103NGP Approximately 17.5 MUF9035NGPS Approximately 27.5 MUF9025NGPS Approximately 27.5 Suffix S indicates spring option MUF4505NGP Technical Data MUF8103NGP Maximum Power: 200 watts Nominal Impedance: 50 ohms VSWR at Resonance: < 1.5:1 Radiator Material: diameter stainless steel Optional Spring: Stainless steel Phasing Coil Housing: Molded polymer jacket with copper, nickel and chrome plated bushing Base Housing Coil: Tapered jacket with copper, nickel and chrome plated bushing Mount Method: Compatible with 3/4 hole mounts Antenna Type: Base loaded 1/2 wave (800 MHz, 900 MHz and unity gain models) Base loaded 5/8 wave over a 1/2 wave (all other models)

13 MOBILE ANTENNAS Elevated Feed Point Antennas No Ground Plane Elevated Feed Point Antennas The elevated feed point antennas are designed for those applications that lack a ground plane. They are ideal for mirror or trunk lid mounting applications or for vehicles with non-metallic surfaces where no ground plane is available. Elevated feed point eliminates vehicle shadow effect Does not require a ground plane; excellent for non-metallic vehicles Stainless steel shock spring included on all models Mates with all 1-1/8-18 thread mounts, including 3/4 mounts (B)MUF8073 (B)MUF8045 (B)MUF8043 Antenna Electrical Specifications Technical Data Maximum Power: 125 watts Polarization: Vertical Nominal Impedance: 50 ohms VSWR at Resonance: < 1.5:1 Radiator Material: diameter stainless steel; bright or black finish Spring: Stainless steel; bright or black finish Phasing Coil Housing: Molded polymer jacket with copper, nickel and chrome plated brass bushing Rod Ferrule: 5/16-24 thread; bright or black chrome plated brass Body: UV stable ABS * Frequency Range Factory Tuned Frequency Gain Rod/Coil Type (B) MUF MHz 815 MHz 3 db Collinear/Closed (B) MUF MHz 815 MHz 3 db Collinear/Closed (B) MUF MHz 815 MHz 5 db Trilinear/Open (B) MUF MHz 835 MHz 3 db Collinear/Open (B) MUF MHz 835 MHz 5 db Trilinear/Closed (B) MUF MHz 898 MHz 5 db Trilinear/Closed Mechanical Specifications Antenna Height at lowest frequency (B) MUF7603 Approximately 38 (B)MUF8073 Approximately 23 (B) MUF8045 Approximately 33 (B) MUF8043 Approximately 23 (B) MUF8455 Approximately 33 (B) MUF9115 Approximately 32 *Prefix B indicates black. Spring included.

14 MOBILE ANTENNAS Base Loaded Unity and Gain Antennas VHF and UHF Wideband Antennas - Field Tunable These field tune antennas address equipment inter-operability challenges by providing superior bandwidth coverage without sacrificing antenna performance. All models are built to withstand high vibration conditions. Outstanding bandwidth performance Rugged compact design ideal for high vibration conditions Mate with all 1-1/8-18 thread mounts, including 3/4 mounts Select models feature a removable whip design for fine tuning or replacement. MWV1322HD(S) operates without a ground plane without compromising VSWR performance. Antenna Electrical Specifications Frequency Range Bandwidth Gain MWV1322(S)* MHz 26 MHz MWV1322HD(S)* MHz 26 MHz Mechanical Specifications 2.4 db with a ground plane (Unity without a ground plane) 2.4 db with a ground plane (Unity without a ground plane) MWB1320** MHz 24 MHz Unity ASPR7495 ASPR795 ASPC201L*** ASPE7495**** MHz, field tunable MHz, field tunable MHz, field tunable MHz, field tunable 24 MHz ( MHz) 100 MHz ( MHz) 100 MHz ( MHz) 100 MHz ( MHz) Whip Length at lowest frequency MWV1322(S) Approximately 48 MWV1322HD(S) Approximately 48 MWB1320 Approximately 22 ASPR /8 ASPR ASPC201L 26 ASPE /8 Unity Unity Unity Unity *Suffix S indicates spring. ** MWB1320 comes with spring and requires a ground plane. *** ASPC201L includes 17 ft RG-58/U cable and UHF male connector. **** includes elastomer spring. ASPR7495 ASPC201L rooftop mount, 3/8 hole with 17 RG-58/U cable MWB1320 Technical Data MWV1322HDS ASPR795 Maximum Power: 150 watts 100 watts (ASPC201L) Nominal Impedance: 50 ohms VSWR at Resonance: < 1.5:1 (ASPR795 and ASPC201L) < 2.0:1 (all other models) Radiator Material: diameter, 17-7PH stainless steel (s MWV1322HD(S) and ASPR7495 only) diameter, 17-7PH stainless (ASPC201L) diameter, stainless steel (ASPR795) diameter tapered stainless steel (all other models) Spring Material (if available with the antenna): Stainless steel Base and Fittings: Aluminum, plated steel and brass (ASPR795) Base Coil Housing: Molded polymer jacket with copper, nickel and chrome plated bushing Antenna Type: Base loaded 1/2 wave (MWV models) 1/4 Wave (all models) Mounting Method: 1-1/8-18 thread mobile mounts, including 3/4 hole mounts (all models except ASPC201L) 3/8 hole snap-in mounts (ASPC201L only)

15 MOBILE ANTENNAS Base Loaded Unity and Gain Antennas VHF and UHF Wideband Antennas - No Tune These antennas address equipment inter-operability challenges by providing superior bandwidth coverage without sacrificing antenna performance. Their no tune wideband design eliminates the need to install multiple antennas to cover various VHF or UHF frequency bands, thus reducing installation costs and complexity and improving overall coverage of the desired frequencies. Rugged stainless steel spring and wideband tube assembly for maximum durability and shock absorption Thick-wall housing, double-sealed for maximum weatherproofing Mates with all 1-1/8-18 thread mounts, including 3/4 mounts MWU4002S operates with or without a ground plane without compromising VSWR performance. Electrical Specifications MWU4002S MWU4505S MWV1365S *MWU4002S operates without a ground plane without compromising VSWR performance. Frequency Range Bandwidth Gain (B) MWV1365S* MHz 38 MHz Unity MWU3502S* MHz 100 MHz (B) MWU4002S* MHz 140 MHz 2.0 db with a ground plane Unity without a ground plane 2.0 db with a ground plane Unity without a ground plane MWU4505(S) MHz 40 MHz 4.5 db MWU4063S* MHz 64 MHz 3 db Technical Data Maximum Power: 200 watts (UHF) 160 watts (VHF) Nominal Impedance: 50 ohms VSWR: < 2.0:1 Radiator Material:.100 diameter stainless steel Spring: Stainless steel Phasing Coil Housing: Molded polymer jacket with bright or black chrome plated bushing Base Coil Housing: Molded polymer jacket with copper, nickel and chrome plated bushing Mechanical Specifications Antenna Height at Lowest Frequency (B)MWV1365S Approximately 20 MWU3502S Approximately 12 (B)MWU4002S Less than 12 MWU4505(S) Approximately 32 MWU4063S Approximately 12 Prefix B indicates black. Suffix S indicates spring option. *This model only includes spring option.

16 PRODUCTION ELECTRONIQUE Inc. 1035, rue Pierre Caisse Saint Jean sur Richelieu (Québec) CANADA J2W 0G9 : : : pe@productionelectronique.com

17 MOBILE ANTENNAS Quarterwave Antennas PCTCN Chrome Nut Antennas Our new high performance chrome nut antenna series offers a durable, super flexible design and reinforced brass button contact for maximum durability against external shock or limited vehicle height clearance. Wideband performance, attractive Titanium gray reflective finish and sleek drop shape rod tip, combined with market competitive prices, makes this new series one of the best values on the marketplace. Optimized bandwidth performance - Only 12 models required to cover all frequencies between 118 MHz and 2.5 GHz High-Tech Titanium gray reflective plating - Closely mimics the color of the metallic surface on which the antenna is installed, nicely complementing the appearance of public safety, livery and service vehicles Gold plated, brass contact button interface - Provides optimized electrical performance, corrosion resistance and maximum 100lb pull force resistance for long lasting, trouble-free operation Tear drop style rod tip - Less prone to detachment due to impact (factory tuned models only) Heavy duty zinc die cast base for maximum durability and corrosion resistance under extreme weather conditions Mates with all 1-1/8-18 thread mounts, including 3/4 mounts for simple installation and/or replacement. Technical Data Maximum Power: 150 watts Nominal Impedance: 50 ohms VSWR at Resonance: < 1.5:1 VSWR across the range of specified frequencies: < 2.0:1 Radiator Material:.062 diameter 17-7ph stainless steel, Titanium gray finish Mount Nut: zinc die cast; Titanium finish Antenna Type: 1/4 Wave (Unity gain models) 5/8 Wave over a 1/4 Wave (3dB gain models) Collinear (4.5 db model)

18 MOBILE ANTENNAS Quarterwave Antennas Electrical Specifications Frequency Range Factory Tuned Frequency Gain Replacement for: PCTCNMFT MHz Field Tunable Unity (B)MFT120 PCTCN MHz 157 MHz Unity BMHB1520, MHB1520 PCTCN MHz 167 MHz Unity MHB1620 PCTCN MHz 405 MHz Unity (B)MUF3800, MUF4060 PCTCN MHz 450 MHz Unity MUF4300, MUF4500 PCTCN MHz 491 MHz Unity MUF4700, MUF4900 PCTCN MHz 805 MHz Unity MUF7000 PCTCN MHz 883 MHz Unity (B)MUF8000, (B)MUF9000 PCTCN MHz 836 MHz 3 db (B)MUF8063 PCTCN MHz 860 MHz 3 db (B)MUF8253 PCTCN MHz 918 MHz 3 db MUF8963 PCTCN GHz 2.45 GHz 4.5 db MUF24005 Mechanical Specifications Antenna Height at lowest frequency PCTCNMFT Approximately 24.0 PCTCN1520 Approximately 21.6 PCTCN1620 Approximately 21.6 PCTCN3840 Approximately 7.38 PCTCN4347 Approximately 6.2 PCTCN4750 Approximately 5.6 PCTCN7080 Approximately 3.3 PCTCN8090 Approximately 3.0 PCTCN8063 Approximately 14.5 PCTCN8253 Approximately 14.0 PCTCN8963 Approximately 12.0 PCTCN24005 Approximately 8.75

19 MOBILE ANTENNAS Base Loaded Unity and Gain Antennas Wide Spectrum Multiband Antenna The PCTWSLMR wide spectrum multiband antenna supports multiband radio technology to provide full interoperability among emergency management and response personnel, regardless of frequency band used. It provides outstanding coverage of VHF and UHF frequencies, including 700 MHz public safety, 800 MHz and 900 MHz frequencies in a ready-to-install, no tune design. Its multiband elements are housed in a rugged, impact-resistant housing for maximum durability and its base is designed to interface with standard NMO mobile mounts to facilitate existing installation upgrades on public safety vehicles. PCTWSLMR PCTMAG-HD (sold separately) No tune, multiband coverage of full spectrum VHF, TETRA/UHF and 700/800/900 MHz frequencies Rugged construction for long lasting, reliable emergency response support IP67 compliant design, when installed on the roof or trunk of a vehicle NMO compatible interface for easy installation or upgrade Stainless steel spring for maximum impact shock absorption Excellent VSWR performance across frequencies Electrical Specifications Other Technical Data Maximum Power: 160 watts Nominal Impedance: 50 ohms Rod Material:.100-inch diameter black e-coated 17-7PH stainless steel Spring: Black chrome Base Coil Housing: Black ABS plastic with zinc diecast internal bushing Radiator Housing: Black Aluminum Mounting Method: Interfaces with 1-1/8-18 threaded mounts, including NMO 3/4 hole mounts. For temporary installations, PCTMAG-HD extra strength magnetic mount is required (sold separately). Frequency Range MHz MHz MHz Bandwidth 38 MHz 140 MHz 262 MHz Mechanical Specifications Approximate Dimensions 2 OD x 22 H in (5.08 x cm) (including whip) Weight 1.46 lbs (0.66 kg) Environmental Specifications Wind 125 mph 12.8 lbs (5.8 kg) Mount Specifications Part Number PCTMAG-HD Diameter 3.25 in (8.25 cm) Operating/Storage Temperature -40 F to +185 F (-40 C to +85 C) Color Black Magnet Pull Force lbs ( kg) Color Black Gain* (Typical) VSWR** (Typical) Unity < 2.0:1 Ingress Protection IP67*** Cable Connector Tab 15 ft Pro-Flex Plus 195 Attached TNC Male 18-8 Stainless Steel * Measured on a 4-foot diameter ground plane. Gain value is measured at the base of the antenna (no cable/connector loss included). ** Measured on a standard NMO mount with 17 feet of RG-58A/U cable. Maximum VSWR 2.5:1. ***When properly installed on a vehicle s rooftop or trunk surface.

20 MOBILE ANTENNAS Low Profile Whipless Antennas Silhouette Transit Antennas The silhouette antennas are designed for transit vehicle installations requiring overhead clearance, including buses, fire-fighting engines, railroad equipment, airport service vehicles, and construction equipment. These low profile multiband antennas provide wideband coverage of specific frequencies without field tuning required.* They are housed in a high impact molded ASA radome for longlasting performance under severe environmental conditions. A GPS multi-band model is also available. Rugged - high impact molded ASA radome assures long, reliable performance and protection against the elements High Performance - when mounted on a flat surface, maximum radiation is vertical and omnidirectional Disguised Appearance - low profile for minimum exposure to theft or vandalism Wideband Coverage - requires no field tuning ASP574 low profile transit antenna series for VHF coverage ASP931 low profile transit antenna Antenna Electrical Specifications Frequency Range Bandwidth Gain ASPB MHz 0.5 MHz Unity ASPC MHz 0.5 MHz Unity ASP MHz 20 MHz Unity ASP MHz 20 MHz Unity ASPB MHz 18 MHz Unity ASPC MHz 24 MHz Unity ASP MHz 42 MHz Unity ASP MHz 88 MHz Unity ASPG MHz 154 MHz Unity Mechanical Specifications Termination Dimensions ASPB574 SO-239 (UHF female, panel mount) 4.1 H x 17 L x 3.5 W ASPC574 SO-239 (UHF female, panel mount) 4.1 H x 17 L x 3.5 W ASP572 UHF female, panel mount (mates with PL259 male) 3.13 H x 8 L x 3.5 W ASP772 BNC female bulkhead 3.4 H x 8 L x 3.5 W ASPB572 UHF female, panel mount (mates with PL259 male) 3.4 H x 8 L x 3.5 W ASPC572 UHF female, panel mount (mates with PL259 male) 3.4 H x 8 L x 3.5 W ASP764 N female, panel mount 3.4 H x 8 L x 3.5 W ASP931 N female, panel mount 3.4 H x 8 L x 3.5 W ASPG931 N female, panel mount 3.4 H x 8 L x 3.5 W Technical Data Maximum Power: 100 watts Polarization: Vertical Nominal Impedance: 50 ohms VSWR: < 2.0:1, maximum Radome Material: White, high impact molded ASA Cable: Sold separately. Call factory for cable assembly options. Mount Method: Standard 1-5/16 roof hole mount Supplied with screws and weather-proof gasket.

21 MOBILE ANTENNAS Mobile Low Profile Vertical Antennas Mobile Low Profile Vertical The MLPV antennas provide superior pattern coverage for mobile and fixed applications from 380 MHz to 5.8 GHz. Their design provides industry leading wideband performance and reliability, with minimum loss and no tuning required. Dual band versions (MLPVDB series) are also available. All models feature an attractive, compact housing environmentally tested for both indoor or outdoor applications. Attractive, low profile design for maximum overhead clearance Industry leading wideband performance provides outstanding coverage across multiple frequency bands with no tuning required Mates with all 1-1/8-18 thread mounts, including 3/4 mounts Wideband, multi-band and no ground plane models available for maximum installation flexibility with a minimum number of installed antennas required NGP models provide 3 dbi gain performance without a ground plane Black over chrome base standard. Also available in white over chrome or black over black base BMLPV2400NGP MLPV800 Mounting The following mounts are recommended with all MLPV antennas [except (B)MLPV4900NGP]: MLFML195C GMLFML195C MTPM800 MVP MMF Options High performance permanent 3/4 hole, 1-1/8-18 thread mount. Includes 17 ft of Pro-Flex TM Plus 195 cable. Loose TNC male connector included. High performance 3-1/4 diameter magnetic base, 1-1/8-18 thread mount. Includes 12 ft of Pro-Flex TM Plus 195 cable terminated with TNC male connector (attached). 5/8 hole, 1-1/8-18 thread mount for surfaces up to 1/2-inch thick. Terminates in an N, female connector. No cable.* 5/8 hole, vandal proof mount. No cable.* 3/4 hole, 1-1/8-18 mount for frequencies above 1 GHz. Terminates in an SMA, male connector. No cable.* The following mounts are recommended for the (B)MLPV4900NGP antenna: MTPMHF MVPHF MHFML195C GMHFML195C Options High frequency 5/8 hole, 1-1/8-18 thread mount for surfaces up to 1-inch thick. N female connector. No cable.* High frequency 5/8 hole, 1-1/8-18 thread. Vandal proof mount for surfaces 1/2 to 1-inch thick. M to N female connector. No cable.* High performance permanent 3/4 hole, 1-1/8-18 thread mount. Includes 17 ft of Pro-Flex TM Plus 195 cable. TNC male connector included (loose). High performance 3-1/4 diameter magnetic base, 1-1/8-18 thread mount. Includes 12 ft of Pro-Flex TM Plus 195 cable terminated with TNC male connector (attached). WMLPVDB800/1900S Technical Data. BMLPV800HD Maximum Power: 150 watts (all models, except UHF) 100 watts (UHF models) Polarization: Vertical Nominal Impedance: 50 Ohm VSWR: < 1.5:1 < 2.0:1 (dual-band and UHF models) Color (add to prefix to indicate choice): Black over chrome (prefix not needed), black over black (B) or white over chrome (W) Mount Method: Compatible with most 1-1/8-18 thread mounts, including 3/4 hole mounts *Order cable assembly separately.

22 * To order black over black version, add the prefix B to the part number. To order the white over chrome version, add the prefix W to the part number. Note: The MLPV4900 and heavy duty models are not available in white over chrome. ** Can be used with or without a ground plane. *** Measured on a 1 x 1 foot ground plane. MOBILE ANTENNAS Mobile Low Profile Vertical Antennas Antenna Electrical Specifications * Frequency Range Bandwidth Gain*** MLPV MHz 30 MHz Unity MLPV MHz 34 MHz Unity MLPV MHz 50 MHz Unity MLPV MHz 62 MHz Unity MLPV MHz 130 MHz 3 dbi*** MLPV MHz 154 MHz 3 dbi*** BMLPV800HD MHz 154 MHz 3 dbi*** MLPVDB800/ MHz and MHz 154 MHz and 280 MHz 3 dbi/4 dbi BMLPVDB800/1900HD MHz and MHz 154 MHz and 280 MHz 3 dbi/4 dbi BMLPVDB800/1900SHD MHz and MHz 154 MHz and 280 MHz 3 dbi/4 dbi MLPVDB800/1900S MHz and MHz 154 MHz and 790 MHz 3 dbi/4 dbi MLPVDB902/ MHz and MHz 26 MHz and 100 MHz 3 dbi/4 dbi MLPVDB902/2400S MHz and MHz 26 MHz and 100 MHz 3 dbi/4 dbi MLPV MHz 1000 MHz 4 dbi*** MLPV2400NGP** GHz 100 MHz 3 dbi MLPV GHz 1000 MHz 4 dbi MLPV4900NGP** GHz 100 MHz 3 dbi Mechanical Specifications (all colors)* Antenna Dimensions Weight (Mass) MLPV H x 1.5 OD 0.31 lbs (.14 kg) MLPV H X 1.5 OD 0.31 lbs (.14 kg) MLPV H X 1.5 OD 0.31 lbs (.14 kg) MLPV H X 1.5 OD 0.31 lbs (.14 kg) MLPV800 and MLPV H X 1.5 OD 0.29 lbs (0.13 kg) BMLPV800HD, BMLPV800/1900HD 2.4 H x 1.5 W x 1.7 D (at the base) 0.44 lbs (0.19 kg) BMLPVDB800/1900SHD 1.79 H x 1.5 W x 1.7 D (at the base) 0.34 lbs (0.15 kg) MLPVDB800/ H X 1.5 OD 0.29 lbs (0.13 kg) MLPVDB800/1900S 1.79 H x 1.5 OD 0.29 lbs (0.13 kg) MLPVDB902/ H X 1.5 OD 0.29 lbs (0.13 kg) MLPVDB902/2400S 1.79 H x 1.5 OD 0.29 lbs (0.13 kg) MLPV H x 1.5 OD 0.34 lbs (0.15 kg) MLPV2400NGP** 3.38 H x 1.5 OD 0.31 lbs (.14 kg) MLPV4900** 1.79 H x 1.5 OD (at the base) 0.34 lbs (0.15 kg) MLPV4900NGP 2.4 H X 1.5 OD 0.29 lbs (0.13 kg)

23 MOBILE ANTENNAS Low Profile Whipless Antennas No Ground Plane Low Profile Vertical Antennas These low profile antennas provide superior pattern coverage for mobile and fixed applications. The no ground plane design provides industry leading performance and reliability, with minimum loss and no tuning required. This antenna series features an attractive, compact housing ideal for both indoor or outdoor applications. Antennas can be purchased separately, or as a kit assembly with the MVP mount for permanent installations. BMLPV900NGP or BMLPV2400NGP MLPV4900NGP BMLPV900NGPVP or BMLPV2400NGP with mount MLPV4900NGP connector interface Attractive, low profile design for maximum overhead clearance Industry leading performance provides outstanding coverage across multiple frequency bands without a ground plane Mates with all 1-1/8-18 thread mounts, including 3/4 mounts Mounting The following mounts are recommended for the MLPV4900NGP only: Options MTPMHF MVPHF High frequency 5/8 hole, 1-1/8-18 thread mount for surfaces up to 1-inch thick. N female connector. No cable.* High frequency 5/8 hole, 1-1/8-18 thread. Vandal proof mount for surfaces 1/2 to 1-inch thick. M to N female connector. No cable.* MHFML195C High performance permanent 3/4 hole, 1-1/8-18 thread mount. Includes 17 ft of Pro-Flex TM Plus 195 cable. TNC male connector included (loose). Technical Data Maximum Power: 100 watts Polarization: Vertical Nominal Impedance: 50 Ohm VSWR: < 2.0:1 Ingress Protection: IP66 Color: Black over black Mount Method: Compatible with 1-1/8-18 thread mounts, including 3/4 hole mounts. See Mounting for recommended mounts. GMHFML195C High performance 3-1/4 diameter magnetic base, 1-1/8-18 thread mount. Includes 12 ft of Pro-Flex TM Plus 195 cable terminated with TNC male connector (attached). The following mounts are recommended for the MLPV2400NGP and MLPV900NPG: Options MLFML195C Permanent mount for frequencies from 800 MHz to 3.0 GHz, 1-1/8-18 thread. Includes 17 ft of Pro-Flex TM Plus 195 cable. TNC male connector included (loose). MVP 5/8 hole, vandal proof mount. No cable. Antenna Electrical Specifications Frequency Range Bandwidth Gain** BMLPV900NGP MHz 26 MHz Unity MLPV2400NGP GHz 100 MHz 3 dbi MLPV4900NGP** GHz 100 MHz 3 dbi Mechanical Specifications (all colors) Antenna Dimensions Weight (Mass) Temperature Range BMLPV900NGP 3.38 H x 1.5 OD 0.31 lbs (.14 kg) -40º C to 70º C MLPV2400NGP 3.38 H x 1.5 OD 0.31 lbs (.14 kg) -40º C to 70º C MLPV4900NGP** 2.4 H X 1.5 OD 0.29 lbs (0.13 kg) -40º C to 70º C * Measured on a 1 x 1 foot ground plane. ** MLPV4900NGP features a custom connector interface that requires installation on PCTEL high frequency mounts. See above chart for recommended options. Note: to order antenna with built-in permanent mount, please add suffix VP to the antenna part number. For example, BMLPV900NGPVP indicates a 900 MHz NGP antenna with built-in permanent N female bulkhead mount.

24 MOBILE ANTENNAS Low Profile Antenna BMLPVMB/LTE Low Profile Antenna The BMLPVMB/LTE low profile vertical antenna provides superior multi-band pattern coverage for mobile or fixed applications operating in frequencies from 698 MHz to 2700 MHz. This antenna is designed to provide industry leading wideband performance and optimal coverage of LTE frequencies, with minimum loss and no tuning required. It features an attractive, compact housing that makes the antenna ideal for indoor or outdoor applications requiring minimum visibility to the antenna. PCTEL s high efficiency permanent mount is recommended for most efficient performance. Attractive, low profile design Multiple band coverage with no tuning required Can be used for mobile and fixed base applications Environmentally tested to MIL-STD-810F MLF High Efficiency Mount (sold separately) Antenna Electrical Specifications Frequency Range Average Gain MHz 3 dbi Mechanical Specifications Antenna Dimensions Temperature Range Ingress Protection 2.4 x 1.5 OD -40 C to +70 C IP66** Technical Data Maximum Power: 150 watts Polarization: Vertical, linear Nominal Impedance: 50 Ohm VSWR: < 2.0:1 Recommended Mount (sold separately): MLFPFP240 or MLFPFP195 high efficiency permanent mount with low loss Pro-Flex Plus 195 cable. Various connector options. * Average gain does not include cable attenuation loss. * When installed per PCTEL installation intructions on a roof top surface.

25 MOBILE ANTENNAS Low Profile Whipless Antennas Sharkfin Multi-band Roof Mount Antenna The GPSDBHF Sharkfin antenna provides multi-band omnidirectional coverage in an attractive, low profile housing. Its low profile through-hole footprint offers an attractive antenna design that provides optimal sealing for leakage resistance. Low, aerodynamic profile eliminates wind noise commonly experienced with external mount vehicular applications Overmolded gasket design provides optimal sealing from condensation and water ingress Integrated antenna mast design provides secure installation to the vehicle UV stability for outdoor applications Sharkfin Multi-band Antenna Multi-band Antenna Electrical Specifications Operating Frequencies Antenna Gain GPSDBHF Mechanical Specifications 2.4 GHz-2.5 GHz (Wi-Fi); GHz (Public Safety/WiMAX) Frequencies Covered Number of Pigtails GPSDBHF Wi-Fi/Public Safety/WiMAX 1* Environmental Specifications Unity Operating Temperature Range Humidity Rating -40 C to +85 C 95% **To order, please follow the following part number configuration: Base Example: GPSDBHF GPS Connector Code Choose among: Right angle SMB Plug (RASBJ) Male SMA (MSMA) Female FME (FFME) AMPS/PCS Connector Code Choose among: Male SMA (MSMA) Male TNC (C) Female TNC (FC) Female FME (FFME) Wi-Fi Connector Code Choose among: Reverse Polarity TNC (RPC) Male TNC (C) Reverse Polarity Male SMA (RPMSMA) Technical Data Maximum Power: 5 watts Input Impedance: 50 ohms VSWR: < 2.0:1 Grounding Protection: DC grounded Housing: Black, UV protected ABS Housing Dimensions (major axis x minor axis x height): 97 mm (3.8 ) x 60 mm (2.4 ) x 70 mm (2.8 ) Cable: 12 ft Pro-Flex Plus 195, black Mount Method: 0.75 through hole mounting Ingress Protection: IP56 * NOTE: Includes a single pigtail terminated with Reverse Polarity, Reverse Threaded Male SMA plug. Call factory for other connector options. This model does not include GPS. ** If your connector preference is not listed, please consult factory for availability.

26 MOBILE ANTENNAS GPS L1 Antennas GPS-NMO Mobile Mount, Low Profile Active, 28dB GPS Antenna PCTEL s GPS active NMO mount antenna provides superior performance with the industry s smallest NMO mountable footprint. The GPS-NMO antenna features a custom tuned frequency ceramic patch element, 15 KV ESD circuit protection, a two stage low noise amplifier and a SAW filter, that provides excellent out-of-band signal rejection performance and consistently clear signal while minimizing loss-of-lock. The GPS-NMO features an attractive, compact housing environmentally tested for both fixed or mobile applications. Its innovative tab design supports higher reliability and repeatable performance at GPS frequencies than button pin designs can provide. The product is available in black or white housing options to suit a wide variety of installation applications. GPS-NMO (left) GPS-NMO-W (right) Attractive, low profile design for maximum overhead clearance 2.7 to 5 Volt operation 15 KV ESD circuit protection Mates with all 1-1/8-18 thread NMO mounts, including 3/4 mounts RF/Electrical Specifications Center Frequency MHz ±10 MHz Element Gain LNA Gain 1 dbic 28 db Mechanical Specifications Antenna Dimensions (diameter x height) 1.5 x 1.8 (38 x 46 mm) Environmental Specifications Temperature Range -40 C to +85 C operating Options Polarization Right Hand Circular Weight Shock Vibration 0.15 lbs (0.07 kg) Vertical axis 50G, Other axes 30G Humidity Current Draw 9 3.3V 15 5V 3 axis, sweep = 60 min Hz random vibration 95% max (non condensing) Color Mounting GPS-NMO GPS-NMO-W Black Radome Black Base White Radome Chrome Base Compatible with all 1-1/8-18 thread NMOmounts, including 3/4 mounts* Low Noise Amplifier Specifications Nominal Impedance: 50 Ohm VSWR (nominal): 1.8:1 Nominal 3.3VDC: 28 5VDC: 30 db Noise Figure: 1.5 db (typical) Voltage: VDC Out-of-band Rejection (typical): +/- 15 MHz: 5 db +/- 20 MHz: 10 db +/- 30 MHz: 32 db +/- 40 MHz: 40 db *PCTEL is a leading designer and manufacturer of custom mobile mount assemblies. Please contact PCTEL Customer Service for your custom solutions PCTEL, Inc. Product specifications are subject to change without notice.

27 Mobile Antennas GPS L1 Multi-band Antennas GPS HIGH PERFORMANCE PLATFORM The GPSHPSM high performance GPS Multi-Band antenna platform is PCTEL s most durable and versatile design for vehicular applications. This platform offers multi-band coverage, superior GPS LNA technology, easy to install design, and top shelf materials to provide maximum durability and performance for Mission Critical communications. No tune, multi-band coverage: 700/800 MHz Public Safety, 800 MHz Cellular/ SMR, 900 MHz GSM/ISM, MHz GSM/PCS, 3G, 4G, 2.4/5.8 GHz WiFi and GHz Public Safety and WiMAX broadband wireless frequencies Metal 3/4-inch stud mount with slotted jam nut provides single cable exit for easier installation and/or antenna replacement Attractive low profile design for maximum installation flexibility without antenna orientation restrictions IP67 compliant design with custom overmolded gasket provides maximum protection against water or dust ingress under severe environmental conditions, when installed on the roof of a vehicle High performance, low loss cable and high quality connectors for maximum RF system efficiency UV resistant black or white housing options complement most vehicular aesthetic requirements U.S. Patent No. 8,184,060 Electrical Specifications - RF Antennas Available s: GPSHPSM/SM/SM (Black Radome) WGPSHP (White Radome) Operating Frequencies Polarization Nominal Impedance Gain * (Typical) Maximum Power VSWR Electrical Specifications - GPS Antenna Voice/Data RF Element Broadband Wireless RF Element MHz MHz GHz GHz Vertical, linear Vertical, linear 50 ohms 4-5 dbi 50 watts < 2.0:1 50 ohms 4-5 dbi 50 watts < 2.0:1 Frequency Band: MHz (GPS L1) Amplifier Gain: 26 db +/- 3 dbic Nominal Impedance: 50 ohms Output VSWR: 1.5:1 typical DC Current: 20 ma Nominal; < C to +85 C DC Voltage: V Noise Figure: 1.8dB Typical Out-of-Band Signal Rejection: > 40 db +/- 50 MHz from center frequency Mechanical and Environmental Specifications Dimensions Coax (3) Connectors ** 5.2 OD x 2.8 H (132 OD x 71 H mm) Radome / Baseplate Construction Black 2 or White UV stable CYCOLOY C6200 Zinc baseplate overmolded with black TPE, SANTO- PRENE gasket 17 feet Pro-Flex Plus 195 (Voice/Data/WiMAX elements); 17 feet Pro-Flex Plus 195 (Broadband Wireless Element); 17 feet RG-174/U (GPS L1) Mounting Method 3/4-inch hole, 3/4-inch long (.75 ) zinc stud mount with dual jam nuts (included) Operating / Storage Temperature -40 C to +85 C SMA Plug (Male) standard Ingress Protection IP67 (when installed on a roof top) *Measured on a 4-foot diameter ground plane. Gain value is measured at the base of the antenna (no cable loss included). **For other connector options, please refer to GPS Multi-Band Mobile Antenna Configurator Part Number Guide for Quad-Band s.

28 MOBILE ANTENNAS GPS L1 Antennas 3910D Very Low Noise Mobile GPS Antenna The 3910D GPS antenna has one of the industry s lowest noise figures. It features ESD circuit protection, an innovative very low noise LNA and a high rejection SAW filter. It also features a precisely tuned custom ceramic patch element that minimizes detuning effects caused by adjacent objects. The 3910D is ideal for Fleet Management, Asset Tracking and Precision Agriculture as well any application with poor signal reception area. The 3910D provides consistent, clear GPS signal reception while minimizing loss-of-lock in high-rf fields. Housed in a weatherproof magnetic or screw mount enclosure, the 3910D GPS antenna is ideal for demanding vehicle mounted GPS applications. Low noise: 0.5 db Low current: 8mA Superior out-of-band rejection Wide voltage input range (2.7-5 VDC) Robust IP67 housing built for various weather conditions Low Noise Amplifier Specifications Nominal Gain: VDC Noise Figure: 0.5 db (typical) Out-of-Band Signal Rejection: > +/- 30 MHz Voltage: VDC RF/Electrical Specifications Center Frequency Nominal Gain Polarization Current Draw MHz ± 10 MHz Mechanical Specifications Right Hand Circular Antenna Dimensions Weight Shock Vibration 1.77 x 2.01 x.47 (45 x 51 x 12 mm).29 lbs (130 g) Vertical axis 50G, other axes 30G 8 3.3V 3 axis, sweep = 15 min Hz log sweep: 3G Cable Connector Mounting Method 9.8 (3 meters) highlyflexible 174 sized cable Male SMA standard Magnetic (5 lb lift-off force) or permanent (pre-threaded for 3 x M2.5 screws) Environmental Specifications Temperature Range -40 C to +85 C operating Ingress Protection IP67 For other connector options, please refer to GPS Mobile Antenna Configurator Part Number Guide

29

30 PRODUCTION ELECTRONIQUE Inc. 1035, rue Pierre Caisse Saint Jean sur Richelieu (Québec) CANADA J2W 0G9 : : : pe@productionelectronique.com

31 MOBILE ANTENNAS Covert Antennas Inside Window Glass Mount This vertical or horizontal polarization antenna is designed for inside glass mount installations operating in the 800 MHz cellular, 900 MHz trunking, 1800 MHz DCS and 1900 MHz PCS bands without the need for tuning. Its tape mount easily attaches to a vehicle s windshield or other glass surfaces making the antenna ideal for public safety or other applications requiring an unobtrusive design. APDM5920U, vertical installation. The antenna can also be installed horizontally. Quad Band covers 800 MHz cellular, 900 MHz trunking, 1800 MHz DCS, and 1900 MHz PCS Low Profile sleek appearance blends well with car dash interior Efficient simple mounting method allows installation in minutes without holes Economical one antenna serves the function of four, minimizing installation and inventory requirements Antenna can be oriented vertically or horizontally for maximum installation flexibility Technical Data Maximum Power: 10 watts Polarization: Linear, horizontal or vertical Nominal Impedance: 50 ohms VSWR: < 2.0:1 Radiator Material: ABS Coax Cable: 10 ft RG-174/U cable (bottom fed) Connector SAP (female FME) Mounting Method: Normount Z500 tape Antenna Electrical Specifications Frequency Range Gain Bandwidth APDM5920U / MHz Unity 136/280 MHz Mechanical Specifications Antenna Dimensions APDM5920U 0.5 D x 5.9 L Normount is a registered trademark of Norton, a Saint-Gobain Co.

32 PRODUCTION ELECTRONIQUE Inc. 1035, rue Pierre Caisse Saint Jean sur Richelieu (Québec) CANADA J2W 0G9 : : : pe@productionelectronique.com

33 INFRASTRUCTURE ANTENNAS Omnidirectional MFB Series VHF/UHF White MAXRAD Fiberglass Base Station (MFB) Omnidirectional Antennas - - and UPS ship pa ble. UPS shippable MFB4505 MMK3 MMK9 MFB VHF Unity 3 db version includes exposed whip MMK4 MBSWM Technical Data Maximum Power: Normal Impedance: VSWR: Radome Material: Radiator Material: Coated steel wire ESD Protection: DC grounded Wind Survival: Termination: Mounting Base Diameter: Mounting Options antenna models) MMK12

34 INFRASTRUCTURE ANTENNAS Omnidirectional MFB Series ** Frequency Range Factory Tuned Frequency Gain 1.5:1 VSWR Vertical 1/2 Power * * * * Height Weight (Mass) Bending Moment at Rated Wind Lateral Thrust at Rated Wind Equivalent Flat Plate Area 2 4 lbs lbs 2 4 lbs lbs 12.6 lbs 12.6 lbs

35 Infrastructure antennas Omnidirectional MFB Series Fiberglass Base Station (MFB) Omnidirectional Antennas These wireless broadband omnidirectional antennas are designed to provide maximum performance and reliability under the toughest weather conditions. The antennas feature a UV stable, vented radome that pro vides ultimate pro tec tion against weather elements. They can be mast or wall mount ed. UV stable, pultruded fiberglass radome. Allows outdoor installation even in harsh climates. Vented system design (all models except MFB24012), provides reliable performance by protecting the electrical design against extreme moisture and/or temperatures. Thread relief on connector (all models, except MFB24012 which has a pigtail). Improved accessibility for taping reduces installation time and improves overall effectiveness. Internal o-ring seal in the base of the antenna with integrated connector at the base. Assures a watertight seal to prevent water from migrating into the antenna connector (all models, except MFB24012 which has a pigtail). Electrical downtilt options on select models, provide system planners flexibility in challenging operating environments. MFB49009 Vented System MFB24012 Technical Data Maximum Power: 25 watts Polarization: Vertical Normal Impedance: 50 ohms VSWR: < 1.7 (max) < 1.5 (typical) Radome Material: UV resistant pultruded fiberglass ESD Protection: Some models available with DC grounding. Contact customer service for more details. Termination: N female 16 RG-213 pigtail with N female connector (for model MFB24012 only.) Mounting Base Diameter: 1.25 inches (all models except MFB24012) 1.5 inches (model MFB24012) Mounting Method: MMK1924 L bracket mount for wall or pipe mount (except MFB24010 and MFB24012) MMK8A - Aluminum extruded bracket for mast mounting (except model MFB24012) BAM1009 MMK1924 BAM1009 MMK8A

36 Infrastructure antennas Omnidirectional MFB Series RF/Electrical Specifications Frequency Range Gain Bandwidth Vertical 1/2 Power MFB19008A GHz 8 dbi 140 MHz 12 MFB GHz 4 dbi 100 MHz 30 MFB GHz 6 dbi 100 MHz 20 MFB GHz 8 dbi 100 MHz 13 MFB GHz 10 dbi 100 MHz 9 MFB GHz 12 dbi 100 MHz 7 MFB GHz 9 dbi 100 MHz 8 MFB GHz 10 dbi 100 MHz 6 Mechanical Specifications Height Weight (Mass) Bending Moment at Rated Wind Lateral Thrust at Rated Wind Equivalent Flat Plate Area Wind Survival MFB19008A 24.0 (601 mm) 0.70 lbs (0.318 kg) 5.7 ft-lbs 5.9 lbs.07 ft mph MFB (206 mm) 0.34 lbs (0.154 kg) 0.7 ft-lbs 2.1 lbs.02 ft mph MFB (295 mm) 0.38 lbs (0.172 kg) 1.4 ft-lbs 3.0 lbs.04 ft mph MFB (513mm) 0.50 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs.06 ft mph MFB (914 mm) 0.65 lbs (0.295 kg) 14.7 ft-lbs 10.1 lbs.11 ft mph MFB (1,118 mm) 3.00 lbs (1.400 kg) 41 ft-lbs 22.4 lbs.25 ft mph MFB (513 mm) 0.5 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs.06 ft mph MFB (513 mm) 0.5 lbs (0.226 kg) 4.4 ft-lbs 5.2 lbs.06 ft mph

37 INFRASTRUCTURE ANTENNAS Omnidirectional MFB Series 800/900 MHz MAXRAD Fiberglass Base Station (MFB) Omnidirectional Antennas The MFB 900/800 MHz series are base matched half wave antennas encapsulated in heavy duty fiberglass radomes with a thick walled aluminum mounting base for reliable long term use. All models are DC grounded and UPS ship pa ble. White ultra-violet resistant pultruded fiberglass radome Thick walled aluminum mounting base Unity/3 db/5 db/7 db models UPS shippable Factory tuned MFB9155 Technical Data Maximum Power: 150 watts Normal Impedance: 50 ohms Radome Material: 1.0 OD pultruded white fiberglass Radiator Material: Coated steel wire ESD Protection: DC grounded Wind Survival: 100 mph Termination: Unity and 3 db models, N Female Mounting Base Diameter: 1-5/16 Mounting Method: Mast or wall mounted. Mounting hardware is sold separately. MMK1: light duty mast mount for antennas under 30 MMK3: light duty mast mount for antennas over 30 MMK4: heavy duty mast mount MMK9: Aluminum mast mount for 1-5/16 OD antennas MBSWM: wall mounting bracket for antennas over 30 (two are required) MMK12: heavy duty mount bracket MMK3 MMK4 MMK1 MMK9 MBSWM MMK12

38 INFRASTRUCTURE ANTENNAS Omnidirectional MFB Series RF/Electrical Specifications Frequency Range Factory Tuned Frequency Gain 1.5:1 VSWR Vertical 1/2 Power MFB MHz 813 MHz 3 db 30 MHz 40 MFB MHz 813 MHz 5 db 20 MHz 22 MFB MHz 858 MHz 3 db 30 MHz 40 MFB MHz 858 MHz 5 db 20 MHz 22 MFB MHz 835 MHz 3 db 30 MHz 40 MFBW MHz N/A 3 db 70 MHz 40 MFBW MHz N/A 5 db 70 MHz 22 MFB MHz 898 MHz 3 db 30 MHz 40 MFB8965(NF) MHz 898 MHz 5 db 20 MHz 22 MFB MHz 938 MHz 7 db 20 MHz 17 MFB8967(NF) MHz 898 MHz 7 db 20 MHz 17 MFB MHz 915 MHz 3 db 20 MHz 40 MFB9155(NF) MHz 915 MHz 5 db 20 MHz 22 MFB9155RPC MHz 915 MHz 5 db 20 MHz 22 MFB9157(NF)* MHz 915 MHz 7 db 20 MHz 17 Mechanical Specifications Height Weight (Mass) Bending Moment at Rated Wind Lateral Thrust at Rated Wind Equivalent Flat Plate Area MFB lbs 4.7 ft-lbs 4.3 lbs.12 sq ft MFB8135* lbs 14.2 ft-lbs 8.0 lbs.22 sq ft MFB lbs 4.7 ft-lbs 4.3 lbs.12 sq ft MFB8585* lbs 14.2 ft-lbs 8.0 lbs.22 sq ft MFB lbs 4.7 ft-lbs 4.3 lbs.12 sq ft MFBW lbs 4.7 ft-lbs 4.3 lbs.12 sq ft MFBW lbs 14.2 ft-lbs 8.0 lbs.22 sq ft MFB lbs 4.7 ft-lbs 4.3 lbs.12 sq ft MFB8965* lbs 14.2 ft-lbs 8.0 lbs.22 sq ft MFB9387* lbs 62.5 ft-lbs 15.8 lbs.44 sq ft MFB8967* lbs 62.5 ft-lbs 15.8 lbs.44 sq ft MFB lbs 4.7 ft-lbs 4.3 lbs.12 sq ft MFB9155(NF)** lbs 14.2 ft-lbs 8.0 lbs.22 sq ft MFB9155RPC lbs 14.2 ft-lbs 8.0 lbs.22 sq ft MFB9157 (NF)* lbs 62.5 ft-lbs 15.8 lbs.44 sq ft

39 INFRASTRUCTURE ANTENNAS Omnidirectional MFB Series MHz, 3 db Gain MAXRAD Fiberglass Base Station (MFB) Omnidirectional Antennas This is an omnidirectional base station antenna that provides 3 db gain within the specified frequency. It is designed for mast mounting. N female connector Thick walled aluminum mounting base White fiberglass radome RF/Electrical Specifications Frequency Range Nominal Gain Vertical Beamwidth at Half Power Horizontal Beamwidth at Half Power MFBW MHz 3 db Mechanical Specifications Antenna Length Weight (Mass) Temperature Range MFBW lbs -40 C to +70 C Lateral Thrust at Rated Wind with 1/2 of Ice Equivalent Flat Plate Area with 1/2 of Ice Wind Survival with 1/2 of Ice MFBW lbf.22 ft mph Technical Data General Specifications: MHz omnidirectional antenna Maximum Power: 50 watts Normal Impedance: 50 ohms Polarization: Vertical VSWR: < 1.8:1 Termination: N female

40 INFRASTRUCTURE ANTENNAS Omnidirectional MHO Series GHz White MAXRAD High Performance Omnidirectional Antennas These omnidirectional antennas provide a high performance low profile base station antenna in a rugged housing. The antenna series is designed to cover frequencies from 2.4 to 2.7 GHz for Wi-Fi Mesh applications. With its integral N-Male connector at the base, this antenna series can be directly mounted on the radio equipment. Slender rugged housing Innovative vented design with aerated cap and base drain system White UV resistant radome. Protects the antenna from environmental factors Omnidirectional Antenna, Side View (top); Bottom View (bottom) RF/Electrical Specifications Frequency Range Nominal Gain H-plane Beamwidth E-plane Beamwidth VSWR MHO24004NM GHz 4 dbi 360 (omni) 30 < 2.0 MHO24006NM GHz 6 dbi 360 (omni) 20 < 2.0 MHO24008NM GHz 8 dbi 360 (omni) 13 < 2.0 MHO242705NM GHz 5 dbi 360 (omni) 25 < 2.0 MHO242705NF GHz 5 dbi 360 (omni) 25 < 2.0 Mechanical Specifications Technical Data General Specifications: Omnidirectional Base Station Antenna Maximum Input Power: 25 watts Radome Material UV Stable Plastic Nominal Impedance: 50 Ohms Polarization: Vertical Linear Termination: Type N Male (NM) or N Female (NF) Wind Survival Equivalent Flat Plane Area Lateral Rated Wind Bending Rated Wind Height Weight MHO24004NM 125 mph 0.04 ft lbs. 1.1 ft-lbs lbs (.14 kg) MHO24006NM 125 mph 0.05 ft lbs. 2.2 ft-lbs lbs (.14 kg) MHO24008NM 125 mph 0.08 ft lbs 5.7 ft-lbs lbs (.14 kg) MHO242705NM 125 mph 0.04 ft lbs. 1.1 ft-lbs lbs (.14 kg) MHO242705NF 125 mph 0.04 ft lbs. 1.1 ft-lbs lbs (.14 kg)

41 MPAMB Series Portable Omnidirectional Antennas The MPAMB portable antennas are designed for indoor wireless applications requiring multiple band coverage. Each rugged antenna features a compact blade style design and 0-90 articulating knuckle. Select no knuckle models are also available. INFRASTRUCTURE ANTENNAS Portable/Access Point Antennas Multiband performance Ground plane independent design provides added installation flexibility Rugged polycarbonate housing provides added durability for use in demanding wireless environments* Articulating knuckle provides 0º-90º pivot and 180º swivel movement allowing vertical orientation of the antenna, regardless of the orientation or position of the wireless device (unless otherwise specified) MPAMB series with knuckle RF/Electrical Specifications MPAMB NK MPAMB700MSMA Frequency Range Gain Polarization Mechanical Specifications Maximum Power Nominal Impedance MPAMB MHz / GHz 0 dbi (average) Vertical, linear 5 Watts 50 ohms < 2.5:1 MPAMB NKMSMA MHz / GHz 0 dbi (average) Vertical, linear 5 Watts 50 ohms < 2.5:1 MPAMB NKRPSM MHz / GHz 0 dbi (average) Vertical, linear 5 Watts 50 ohms < 2.5:1 BMPAMB RPTNC MHz / GHz 0 dbi (average) Vertical, linear 5 Watts 50 ohms < 2.5:1 BMPA3637C GHz 3 dbi (average) Vertical, linear 5 Watts 50 ohms < 2.5:1 MPAMB GHz / GHz 2.14 dbi/4 dbi Vertical, linear 5 Watts 50 ohms < 2.5:1 MPAMB RPSM GHz / GHz 2.14 dbi/4 dbi Vertical, linear 5 Watts 50 ohms < 2.5:1 MPAMB GHz 3 dbi (average) Vertical, linear 5 Watts 50 ohms < 2.5:1 MPAMB700MSMA MHz / GHz 2 dbi (average) Vertical, linear 5 Watts 50 ohms < 2.5:1 MPAMB700MTNC MHz / GHz 2 dbi (average) Vertical, linear 5 Watts 50 ohms < 2.5:1 VSWR Antenna Height Temperature Range Knuckle Movement Color Connector Type MPAMB /8 in (19.4 cm) -22 F to +158 F(-30 C to +70 C) 180 swivel, 0-90 knuckle Gray TNC Male MPAMB NKMSMA 6.5 in (16.5 cm) -40 F to +185 F(-40 C to +85 C) n/a Gray SMA Male MPAMB NKRPSM 6.5 in (16.5 cm) -40 F to +185 F(-40 C to +85 C) n/a Gray Reverse Polarity SMA Male BMPAMB RPTNC 7-5/8 in (19.4 cm) -22 F to +158 F(-30 C to +70 C) 180 swivel, 0-90 knuckle Black Reverse Polarity TNC Male BMPA3637C 6 in (15.2 cm) -40 F to +185 F(-40 C to +85 C) 180 swivel, 0-90 knuckle Black TNC Male MPAMB in (15.2 cm) -40 F to +185 F(-40 C to +85 C) 180 swivel, 0-90 knuckle Black Reverse Polarity TNC Male MPAMB RPSM 6 in (15.2 cm) -40 F to +185 F(-40 C to +85 C) 180 swivel, 0-90 knuckle Black Reverse Polarity SMA Male MPAMB in (13.4 cm) -40 F to +185 F(-40 C to +85 C) 180 swivel, 0-90 knuckle Black Reverse Polarity TNC Male MPAMB700MSMA 8.3 in (21.1 cm) -40 F to +185 F(-40 C to +85 C) 180 swivel, 0-90 knuckle Black SMA Male MPAMB700MTNC 8.3 in (21.1 cm) -40 F to +185 F(-40 C to +85 C) 180 swivel, 0-90 knuckle Black TNC Male *MPAMB and MPAMB700 models are IP54 rated.

42 INFRASTRUCTURE ANTENNAS Parabolic Reflector GHz Parabolic Reflector Antenna Series with Radome The MPRC prime focus parabolic reflector antenna series suppresses extraneous sidelobe and cross-polarized energy. These antennas feature a micro fine elevation and azimuth adjustment kit. The MPRC series is provided with a radome as a standard feature. Availability in two and three foot diameter sizes Radome comes standard and installed Rear mounted feed radome never has to be removed Continuous polarization adjustment Fine adjustment mechanism for elevation and azimuth Assembled and attached offset mount allows easy access to connector Double saddle mounting brackets will accommodate pipe attachments ranging from to 4.5 OD Robust mounting structure. Three point mount attachment improves stability and prevents reflector distortion and mechanical oscillation 2 foot versions are UPS shippable RF/Electrical Specifications Technical Data General Specifications: Prime Focus Parabolic Reflector Antenna Maximum Power: 5 watts Nominal Impedance: 50 ohms SWR/return loss: < 1.5 / >13.9 db Polarization: Linear, continuously adjustable Front-to-back Ratio: 28 db (MPRC2423) 29 db (MPRC3623) Interface Connector: Type N female Mount Interface: Accommodates to 4.5 pipe OD Frequency Range Nominal Gain (+/- 0.5 db at mid band) 3 db Beamwidth, Nominal MPRC GHz 21.5 dbi 12.4 MPRC GHz 24.5 dbi 9.0 Mechanical Specifications Wind Survival with 1/2 of radial ice Temperature Range Diameter MPRC mph -40 C to +80 C 26 MPRC mph -40 C to +80 C 36

43 INFRASTRUCTURE ANTENNA Dual Band Stubby Antenna Low Profile Access Point Antenna for Broadband Wireless The PCTMI2458-RPC is a low profile antenna that is optimized for operation with reverse polarity TNC compatible broadband wireless MIMO (802.11n) access points operating at 2.4 GHz and 5 GHz frequencies. The rugged, UV resistant housing makes it suitable for use in a wide variety of indoor applications, including office LAN environments, factory floors, and retail establishments. Omnidirectional antenna for indoor operation Outstanding performance in a very low profile housing White UL 94-V0 plastic housing Built directly on an RPTNC plug connector No more than 3.26 inches long including the connector PCTMI2458-RPC RF/Electrical Specifications Frequency Range Peak Gain Elevation Plane 3 db Beamwidth Azimuth Plane 3 db Beamdith GHz 3 dbi GHz 5 dbi Technical Data General Specifications: Low Profile MIMO Access Point Antenna Polarization: Vertical, linear Nomindal Impedance: 50 ohms VSWR: < 2.0:1 Radome: White, impact resistant UV stable plastic Mechanical Specifications Connector Type Dimensions Operating Temperature Reverse Polarity TNC 3.26 x 0.77 inches (8.28 x 1.95 cm) -30 C to +70 C

44 PRODUCTION ELECTRONIQUE Inc. 1035, rue Pierre Caisse Saint Jean sur Richelieu (Québec) CANADA J2W 0G9 : : : pe@productionelectronique.com

45 INFRASTRUCTURE ANTENNAS MAXRAD Yagi - MYA Series Aluminum Yagi Antennas The MYA UHF yagis are unsurpassed in their price to performance ratio. All models feature rugged 6061-T6 seam less alu mi num con struc tion, stainless steel hardware, and through boom mounting of all elements for years of reliable service. Elements are DC grounded to the boom. Select models are available in black finish. These antennas are UPS shippable. MYA2203KHDN Stainless steel hardware Available field tunable (add suffix K ) or factory tuned Field tunable (FT) version has tele scop ing elements with stainless steel lock clamps for easy adjustment Stacking harness available for phasing two or more antennas Black finish available on select models 3 element yagi boom available with 7/8 double wall (add suffix HD ) 6 element yagi boom is a 2 piece assembly Heavy-duty, double-walled aluminum boom Black finish available on select models MYA1503K Technical Data MYK1 Maximum Power: 300 watts (UHF series) 250 watts (VHF series) 500 watts (MYA1403 only) 1000 watts (lowband series) Nominal Impedance: 50 ohms Radiator Material: 3/8 solid 6061-T6 aluminum ESD Protection: DC grounded Wind Survival: 100 mph, 125 mph (MYA43012 only) Termination: SO239 standard, N female is optional MYK2

46 INFRASTRUCTURE ANTENNAS MAXRAD Yagi - MYA Series RF/Electrical Specifications Frequency Range Factory Tuned Frequency Gain 1.5:1 VSWR Horizontal 1/2 Power Vertical 1/2 Power Front-to-Back Ratio MYA723K(N) MHz Specify frequency 9.2 dbi.7/1.7 MHz db MYA1403K MHz when ordering or 9.2 dbi 0.7 MHz db MYA1403N* MHz add suffix K 9.2 dbi 0.7 MHz db MYA1503K(N) MHz for field or factory tuned option. 9.2 dbi 0.7 MHz db MYA1505K(N) MHz Add suffix FT 11.3 dbi 1.3 MHz db MYA1506N MHz for telescopic 12.3 dbi 1.5 MHz db MYA2203KHDN MHz elements option 9.2 dbi 3.0 MHz db MYA MHz 413 MHz 9.2 dbi 15 MHz db MYA4065N MHz 413 MHz 11.3 dbi 15 MHz db MYA4205N MHz 430 MHz 11.3 dbi 20 MHz db MYA MHz 440 MHz 9.2 dbi 20 MHz db MYA45012(N) MHz 460 MHz 14.3 dbi 20 MHz db MYA4503(N) MHz 460 MHz 9.2 dbi 20 MHz db MYA4505(N) MHz 460 MHz 11.3 dbi 20 MHz db MYA4506(N) MHz 460 MHz 12.3 dbi 20 MHz db MYA MHz 480 MHz 12.3 dbi 20 MHz db MYA MHz 728 MHz 11.1 dbi 36 MHz db MYA MHz 813 MHz 13.1 dbi 60 MHz db MYA MHz 813 MHz 8.1 dbi 60 MHz db MYA MHz 813 MHz 11.1 dbi 60 MHz db MYA MHz 835 MHz 13.1 dbi 73 MHz db MYA MHz 835 MHz 8.1 dbi 73 MHz db MYA MHz 835 MHz 11.1 dbi 73 MHz db MYA MHz 915 MHz 13.1 dbi 45 MHz db MYA MHz 915 MHz 8.1 dbi 75 MHz db MYA MHz 915 MHz 11.1 dbi 45 MHz db MYA MHz 930 MHz 13.1 dbi 75 MHz db MYA MHz 930 MHz 8.1 dbi 50 MHz db MYA MHz 930 MHz 11.1 dbi 75 MHz db MYA MHz 930 MHz 12.1 dbi 75 MHz db * Must specify frequency when ordering; add $3.00 for N connector. Suffix N indicates N connector. Add suffix K for field or factory tuned option. Add suffix FT for telescopic elements option.

47 INFRASTRUCTURE ANTENNAS Yagi Arrays Mechanical Specifications Weight (Mass) Elements Bending Moment at Rated Wind Lateral Rated Wind Equivalent Flat Plate Area Boom Length MYA723K(N) 7 lbs ft-lbs 48.9 lbs 1.26 sq ft 92 Boom Diameter 1-1/2 (double walled) MYA1403K 3 lbs ft-lbs 14.5 lbs.36 sq ft 42 7/8 MYA1403N* 3 lbs ft-lbs 14.5 lbs.36 sq ft 42 7/8 MYA1503K(N) 3 lbs ft-lbs 14.5 lbs.36 sq ft 42 7/8 MYA1505K(N) 4 lbs ft-lbs 27.6 lbs.71 sq ft /4 MYA1506N* 5 lbs ft-lbs 37.1 lbs.96 sq ft /4 MYA2203KHDN 3 lbs 3 16 ft-lbs 9.1 lbs.21 ft /8 MYA lbs ft-lbs 6.1 lbs.15 ft /8 MYA4065N 2.0 lbs ft-lbs 9.3 lbs.23 ft /8 MYA4205(N) 2.0 lbs ft-lbs 9.3 lbs.23 ft /8 MYA lbs ft-lbs 6.1 lbs.15 ft /8 MYA45012(N) 5.0 lbs ft-lbs 24.9 lbs.62 ft /4 MYA4503(N) 1.5 lbs ft-lbs 6.1 lbs.15 ft /8 MYA4505(N) 2.0 lbs ft-lbs 9.3 lbs.23 ft /8 MYA4506(N) 2.5 lbs ft-lbs 12.2 lbs.29 ft /8 MYA lnb ft-lbs 12.2 lbs.29 ft /8 MYA lbs ft-lbs 10.7 lbs.17 sq ft 28 7/8 MYA lbs ft-lbs 20.8 lbf.27 ft /8 MYA lbs ft-lbs 6.5 lbs.10 sq ft 17 7/8 MYA lbs ft-lbs 10.7 lbs.17 sq ft 28 7/8 MYA lbs ft-lbs.29 sq ft.29 sq ft 48 7/8 MYA lbs ft-lbs 6.5 lbs.10 sq ft 17 7/8 MYA lbs ft-lbs 10.7 lbs.17 sq ft 28 7/8 MYA lbs ft-lbs 16.6 lbs.27 sq ft 48 7/8 MYA lbs ft-lbs 5.9 lbs.09 sq ft 17 7/8 MYA lbs ft-lbs 9.1 lbs.16 sq ft 23 7/8 MYA lbs ft-lbs 16.6 lbs.27 sq ft 48 7/8 MYA lbs ft-lbs 5.9 lbs.09 sq ft 17 7/8 MYA lbs ft-lbs 9.1 lbs.16 sq ft 23 7/8 MYA lbs ft-lb 10.3 lbs.18 sq ft 23 7/8 * Must specify frequency when ordering; add $3.00 for N connector. Suffix N indicates N connector. Add suffix K for field or factory tuned option. Add suffix FT for telescopic elements option.

48 PRODUCTION ELECTRONIQUE Inc. 1035, rue Pierre Caisse Saint Jean sur Richelieu (Québec) CANADA J2W 0G9 : : : pe@productionelectronique.com

49 INFRASTRUCTURE ANTENNAS Directional Panels - WISP Series WISP Directional Panel Antennas The directional panel antennas are de signed to provide maximum gain at 2.4 GHz frequencies. With a VSWR of less than 1.8:1, all models provide efficient and stable performance across the band. These robust antennas are designed for outdoor applications. Patented printed circuit board design. Best performance-to-price ratio. Attractive, low profile UV stable housing. Blends well with indoor and outdoor environments where aesthetic considerations are important. Corner exit RG-58/U pigtail design. Permits the panel to be mounted in vertical or horizontal polarity. Adjustable mounting brackets for outdoor mounting. Provide maximum flexibility for outdoor installations. WISP Directional Panels Technical Data General Specifications: Directional panel antennas Maximum Power Input: 20 watts Polarization: Linear, vertical/horizontal Nominal Impedance: 50 ohms VSWR: < 1.8:1 Radome Material: UV stable plastic Cable: 12 RG58/U with attached female N connector Temperature Range: -40 C to +70 C RF/Electrical Specifications Frequency Range Gain 3 db Horizontal Beamwidth 3 db Vertical Beamwidth Front-to- Back Ratio WISP24009PTNF GHz 9.0 dbi > 15 db WISP24013PTNF GHz 13.0 dbi > 18 db WISP24018PTNF GHz 18.0 dbi > 25 db Mechanical Specifications Dimensions Range Weight (Mass) Temperature Range Frontal Wind mph WISP24009PTNF 5.1 x 4.7 x lbs -40 C to +70 C 9.3 lbs WISP24013PTNF 8.8 x 8.1 x lbs -40 C to +70 C 27.9 lbs WISP24018PTNF 15.1 x 13.9 x lbs -40 C to +70 C 85 lbs Mounting Method WISP24009PTNF WISP24013PTNF WISP24018PTNF Included Mount Indoor/outdoor articulating mount Heavy duty outdoor adjustable mount Heavy duty outdoor adjustable mount 2010 PCTEL, Inc. Product specifications are subject to change without notice.

50 NON CELLULAR DIRECTIONAL BASE STATION ANTENNAS Yagi Base Station Antennas WISP Enclosed Yagi Antenna The yagi antenna can be used as bridge antenna between two networks or for point-to-point communications. It is fi eld adjustable for vertical or horizontal polarization with matched principal plane beamwidths for optimum performance in either orientation. This design also provides improved frontto-back ratio and sidelobe suppression that reduces interference. The antenna features a robust mounting structure for consistent performance regardless of weather conditions. Technical Data Polarization: Vertical or horizontal, linear (user adjustable) Nominal Impedance: 50 ohms VSWR: < 1.5:1 Wind Survival: 125 mph Cable: 18 coax Termination: N female Mounting Method: Heavy duty yagi mounting bracket (included) permits mast mounting on masts up to 2 O.D. Field adjustable to allow vertical or horizontal polarity. Eliminates cochannel interference from neighboring radiators. Polarity markings molded on the antenna ensure installation in the correct orientation. Includes a robust mast mount bracket designed to withstand 125 mph wind. Matched principal plane beamwidths with excellent sidelobe suppression and cross-polarization rejection of more than 20 db. Provides superior signal quality with enhanced gain performance and minimal interference from neighboring radiators. 30 db front-to-back ratio permits less physical separation on the tower, adding mounting fl exibility at installation sites where space is limited. Attractive weather-proof radome constructed of UV resistant material. Provides robust and trouble-free use in harsh outdoor environments. Antenna Electrical Specifications WISP24015PTNF Frequency Range GHz Gain Mechanical Specifications Dimensions Weight (Mass) Horizontal Plane Beamwidth Vertical Plane Beamwidth Front-to- Back Ratio 15 dbi dbi Lateral Thrust at Rated Wind Equivalent Flat Plate Area WISP24015PTNF 14 x 3 OD 1 lbs 18.3 lbs 0.20 ft 2 For detailed specifi cations, visit

51 INFRASTRUCTURE ANTENNAS Directional Panels Directional Linear Polarized Panel Antennas The FP directional panel antenna series is designed to cover various frequencies, obtaining maximum gain with an attractive, low profile package. All of the models provide efficient and stable performance across the band and can be mounted indoors or outdoors. UL94-V0 ASA radome and PC board conform to UL s high flame retardant rating, allowing maximum installation flexibility. Meets stringent building code requirements. Attractive, low profile housing. Blends well with indoor and outdoor environments where aesthetic considerations are important. Adjustable mounting brackets for outdoor installation. Panel mounted type N female connector. FRONT VIEW MOUNT VIEW RF/Electrical Specifications Frequency Range Gain 3 db Horizontal Beamwidth 3 db Vertical Beamwidth FP VP MHz MHz 10 dbi 11 dbi FP VP GHz 18 dbi FP VP GHz 22 dbi 9 9 Technical Data Maximum Power: 20 watts Polarization: Vertical Linear Nominal Impedance: 50 ohms Mechanical Specifications Dimensions Antenna Weight (Mass) Temperature Range VSWR: < 2.0 (FP VP only) < 1.5 (all models except FP VP) FP VP 14.5 x 14.5 x 1.75 (340 x 340 x 30 mm) FP VP 14.5 x 14.5 x 1.75 (340 x 340 x 30 mm) FP VP 14.5 x 14.5 x 1.75 (340 x 340 x 30 mm) 3.5 lbs (1.6 kg) 3.5 lbs (1.6 kg) 3.5 lbs (1.6 kg) -40 C to +85 C -40 C to +85 C -40 C to +85 C Front to Back Ratio: 25 Radome Material: UL94-V0 ASA radome Mounting Method: Adjustable mount is included. Suitable for pipe or wall installation.

52 INFRASTRUCTURE ANTENNAS Directional Panels FP2458-DP3X3 Directional MIMO Panel Antenna The FP2458-DP3X3 dual-band MIMO antenna provides spatial and polarization diversity coverage of GHz and GHz broadband wireless WiFi frequencies in an attractive, low-profile housing. The platform was designed to provide optimal coverage for areas or events with a large number of mobile data users. It was designed for outdoor or in-building installations utilizing n multi-band wireless LAN access point radios. Front View Coverage of GHz and GHz frequencies Six-port MIMO design (three ports for each frequency band) Beamwidth and gain characteristics designed for optimal coverage Integral high performance, low loss Plenum rated cable jumpers Fully adjustable mount for pipe or wall mounting UL 94-HB listed materials Mount View RF/Electrical Specifications Technical Data Frequency Range Nominal Gain Horizontal Beamwidth Vertical Beamwidth Port-to-Port Isolation GHz 12.5 dbi db GHz 11.5 dbi db Maximum Power: 25 watts Polarization: Dual Linear (2 x V / 1 x H) for each band Nominal Impedance: 50 ohms SWR: 1.7:1 typical 2.0:1 maximum Front to Back Ratio: 20 Radome Material: UL94-HB ASA radome Mounting Method: Adjustable mount is included. Suitable for pipe or wall installation. Mechanical Specifications Wind Survivability 125 mph Part Number FP2458-DP3X3RPC FP2458-DP3X3RPSMA FP2458-DP3X3NM FP2458-DP3X3RPNM Dimensions 14.5 x 14.5 x 1.75 (340 x 340 x 30 mm) Connector Options Connector Type Reverse Polarity TNC plug Reverse Polarity SMA plug N Male Reverse Polarity N Male Antenna Weight (mass) 3.5 lbs (1.6 kg) Temperature Range -40 C to +85 C

53 INDOOR/OUTDOOR ANTENNAS Permanent Mount Multi-Band Omnidirectional Antenna Permanent Mount Multi-Band Omnidirectional Antenna This antenna provides multi-band omnidirectional coverage for fixed or mobile applications operating in AMPS, PCS and Wi-Fi frequencies. Featuring a durable, very low profile radome and integral stud mount base for through hole installations, this antenna is ideal for vending machine, meter reading and other telemetry data tracking applications requiring a discrete antenna solution. : Low profile design for minimal exposure to theft or vandalism Through hole mounting with jam nut prevents removal of antenna Rubber gasket for water ingress prevention allows use in and out of doors Durable UV stable plastic for long lasting indoor or outdoor installations High gain performance and high efficiency cable supports highly efficient radio systems Antenna Electrical Specifications Technical Data General Specifications: Bottom fed multi-band antenna for use on metallic ground planes Maximum Power: 10 watts VSWR: < 2:1 (Wi-Fi) < 2:1 (AMPS, PCS) Nominal Impedance: 50 ohms Polarization: Linear, vertical Radome Material: UV stable plastic Cable: Two 3 ft Pro-Flex Plus 195 Connector*: Male SMA (AMPS/PCS) Reverse Polarity SMA (WiFi) Mount Method: Through hole 15/16-inch dia (0.94) 7/8-14-inch UNF plastic Hex-nut *Standard. Please contact factory about other connector options. PCTMBPTSM/RPSM Frequency Range MHz, MHz, MHz Mechanical Specifications PCTMBPTSM/RPSM Dimensions Horizontal Beamwidth x 1.5 (11.18 x 4.06 cm) Vertical Beamwidth Weight (Mass) 0.40 lb (0.18 kg) Peak Gain 2 dbi 3 dbi 3 dbi

54 INDOOR/OUTDOOR ANTENNAS Permanent Mount Multi-Band Omnidirectional Antenna PCTMBPTSM/RPSM Radiation Patterns PCS Elevation Cut AMPS Elevation Cut ISM Elevation Cut Azimuth Plane Radiation Pattern

55 INFRASTRUCTURE ANTENNAS Mounts and Accessories MBS Series Base Station Adapters The MBS VHF/UHF/800 MHz series is ideal for temporary installations. The MBS adapter allows a mobile VHF, UHF or 800 MHz antenna to be used as a base station. By providing radials, the antenna can be used in areas where a ground plane is not available. Will accept any antenna that utilizes 1-1/8-18 thread mounts Mounts on outside diameter masts Converts any MHz mobile antenna into a base station RF/Electrical Specifications Frequency Range Factory Tuned Frequency Gain 1.5:1 VSWR Insertion Loss at Highest Frequency Technical Data Maximum Power: 250 watts (MBS) 200 watts (MBSUHF) 100 watts (MBS800) Construction Material: Stainless steel Termination: MBS: SO-239; N female MBSUHF: N female MBS800: N female MBS MHz Dependent upon the antenna.1 db MBSUHF MHz Dependent upon the antenna.1 db MBS MHz Dependent upon the antenna.2 db

56 Thick Surface Mounts - BRASS BMA Series 3/8 or 3/4 hole; 1-1/8-18 thread; installs from above; can be used for metal thickness up to 1/8 Length of Coax Coax Connector* Type BMA38** None N/A None N/A BMA-NC** 17 RG-58/U None N/A BMAFLC-NC 17 RG-58 PTFE None N/A BMA 17 RG-58/U PL259 Solder BMACP 17 RG-58/U PL259 Crimp BMANCP 17 RG-58/U N Crimp BMABN 17 RG-58/U BNC Crimp BMAC 17 RG-58/U TNC Crimp BMAPL 17 RG-58/U Mini-UHF Crimp BMAML195MSMA 17 Pro-Flex Plus 195 Male SMA Crimp BMAMSMA 17 RG-58/U Male SMA Crimp Thick Surface Mounts - BMATM Series 3/8 or 3/4 hole; 1-1/8-18 thread; thick plate; installs from below; can be used for metal thickness to 3/16 Length of Coax Coax Connector* Type BMATM-NC 17 RG-58/U None N/A BMATMML195NC 17 Pro-Flex Plus 195 None N/A BMATM 17 RG-58/U PL259 Solder BMATMCP 17 RG-58/U PL259 Crimp BMATMC 17 RG-58/U TNC Crimp BMATMMSMA 17 RG-58/U Male SMA Crimp BMATMPL 17 RG-58/U Mini-UHF Crimp BMATMFFME 17 RG-58/U Female FME** Crimp BMATM38 N/A None None N/A MOBILE ANTENNAS Permanent Mounts BMA BMATM K/KE794 Surface Mounts 3/4 hole for up to 1/2 Thick Roof Thickness Length of Coax Coax Connector K RG-58/U None KE RG-58/U None * Connectors are shipped loose. Connectors may be attached upon request for an additional charge ** This mount installs from below. K794 Series For other connector options, please refer to the Mobile Antenna Mounts Configurator Part Number Guide.

57 MOBILE ANTENNAS Magnetic Mounts G Magnetic Mount Series Black or chrome 3-1/4 diameter magnetic mount; 1-1/8-18 thread Length of Coax Coax Connector* Type (R) (B) G-NC 12 RG-58A/U None N/A (R) (B) GC-NC 12 RG-58/U None N/A (R) (B) G 12 RG-58A/U PL259** Crimp (R) (B) GBN 12 RG-58/U BNC Crimp (R) (B) GC 12 RG-58/U TNC Crimp (R) GML195C 12 Pro-Flex Plus 195 TNC Crimp (R)GP 12 RG-58/U PTFE PL259 Solder (R) (B) GPL 12 RG-58/U Mini-UHF Crimp RBGFPL 12 White PTFE Mini-UHF Crimp (R) GML195NCP 12 Pro-Flex Plus 195 N Crimp (R) (B) GNCP 12 RG-58/U N Crimp (R) GML195MSMA 12 Pro-Flex Plus 195 Male SMA Crimp (R)GMSMA 12 RG-58/U Male SMA Crimp (R) (B) GFFME 12 RG-58/U Female FME** Crimp RGRF240-NC 12 Pro-Flex Plus 240 None N/A G * Connectors are shipped loose. Connectors may be attached upon request for an additional charge. ** Connectors are attached on these models only. (R) prefix indicates an optional rubber boot (B) prefix indicates black option For other connector options, please refer to the Mobile Antenna Mounts Configurator Part Number Guide.

58 MOBILE ANTENNAS Magnetic Mounts BGM GM GM Series Black or chrome, 2-3/8 diameter magnetic mount; 1-1/8-18 thread Length of Coax Coax Connector Type (B) GM-NC 12 RG-58A/U None N/A (B) GMC-NC 12 RG-58/U None N/A (B)GMML195-NC 12 Pro-Flex Plus 195 None N/A (B) GM 12 RG-58A/U PL259* Crimp (B) GMBN 12 RG-58/U BNC Crimp (B) GMC 12 RG-58/U TNC Crimp (B) GMML195C 12 Pro-Flex Plus 195 TNC Crimp BGMFFME 12 RG-58/U Female FME** Crimp (B) GMML195MSMA 12 Pro-Flex Plus 195 Male SMA Crimp (B) GMMSMA 12 RG-58/U Male SMA Crimp (B) GMML195NCP 12 Pro-Flex Plus 195 N Crimp (B) GMNCP 12 RG-58/U N Crimp GMSUNCP 12 RG-58A/U N Crimp GMNF 12 RG-58/U Female N Crimp (B) GMPL 12 RG-58/U Mini-UHF Crimp * Connectors are shipped loose. Connectors may be attached upon request for an additional charge. ** Connectors are attached on these models only. (B) prefix indicates black option For other connector options, please refer to the Mobile Antenna Mounts Configurator Part Number Guide.

59 MOBILE ANTENNAS Mirror Mounts (B)MBM Series Black or chrome, 1-1/8-18 thread; mirror bracket mount Length of Coax Coax Connector Type (B) MBM-NC 17 RG-58A/U None N/A (B) MBMC-NC 17 RG-58/U None N/A (B) MBM 17 RG-58A/U PL259 Solder MBMBN 17 RG-58/U BNC Crimp (B) MBMC 17 RG-58/U TNC Crimp (B) MBMPL 17 RG-58/U Mini-UHF Crimp (B)MBM Prefix B indicates black. For other connector options, please refer to the Mobile Antenna Mounts Configurator Part Number Guide.

60 MOBILE ANTENNAS Permanent Mounts High Frequency Mounts 3/4 hole; 1-1/8-18 thread; Crimp on Mount Type Coax Connector MMF MHFML195C** GMHFML195C** Permanent microwave mount for frequencies from 800 MHz to 3.0 GHz for up to.06 thick roof surfaces. Permanent microwave mount for frequencies from 3.0 GHz to 5.8 GHz for up to thick roof surfaces Magnetic base microwave mount for frequencies from 3.0 GHz None 17 ft. Pro-Flex TM Plus ft. Pro-Flex TM Plus 195 Male SMA* Loose TNC male standard. Other connector options (NF, NM, RPC) are available. Attached TNC male standard. Contact factory for other connector options. MMF MHFML195C MLFML195C Permanent mount for frequencies from 800 MHz to 3.0 GHz for up to thick roof surfaces 17 ft. Pro-Flex TM Plus 195 Loose TNC male standard. Contact factory for other connector options. GMHFML195C MHFPFP240C** Permanent mount for frequencies from 800 MHz to 3.0 GHz for up to thick roof surfaces 17 ft. Pro-Flex TM Plus 240 Loose TNC male standard. Contact factory for other connector options. MLFML195C GMHFPFP240C** Magnetic mount for frequencies from 800 MHz to 3.0 GHz for up to thick roof surfaces 12 ft. Pro-Flex TM Plus 240 Loose TNC male standard. Contact factory for other connector options. GMLFML195C Magnetic base mount for frequencies from 800 MHz to 3.0 GHz 12 ft. Pro-Flex TM Plus 195 Attached TNC male standard. Contact factory for other connector options. MHFPFP240C High Frequency Mounts For Thick Roof Surfaces 5/8 hole; 1-1/8-18 thread; Crimp on Mount Type Coax Connector MTPMHF** MVPHF** Permanant microwave mount for frequencies from 3.0 GHz to 5.8 GHz. For surfaces up to 1-inch thick. Vandal-proof microwave mount for frequencies from 3.0 GHz to 5.8 GHz. For surfaces up to 1/2-inch thick. None None N female* connector M to N female* connector GMLFML195C MTPMHF * Cable assembly with mating connector sold separately. ** High frequency mount to be used with (B)MEFC49005HF, (B)MEFC58005HF, MEFC2327HF and MLPV4900NGP For other connector options, please refer to the Mobile Antenna Mounts Configurator Part Number Guide. MVPHF

61 MOBILE ANTENNAS Permanent Mounts Vandal Proof Mounts - MVP 5/8 hole; 1-1/8-18 thread; thick plate mount; can be used for metal thickness up to 1/2 inch. Mount Type Coax Connector MVP MVP Vandal-proof permanent mount for frequencies under 3 GHz. Accomodates surfaces up to 1/2-inch thick. None* M to N Female MVPHF** Vandal-proof microwave mount for frequencies from 3.0 GHz to 5.8 GHz. For surfaces up to 1/2-inch thick. None* M to N Female MVPHF K Mounts 3/4 Hole Rooftop Mounts for 800 MHz Male-Female Contact Antennas Length of Coax Coax Connector K166 K166M 17 RG-58/U Mini-UHF crimped K166MTT 25 RG58/U Mini-UHF crimped K166T 17 RG-58/U TNC male crimped KD166N 17 Pro-Flex TM Plus 195 N male crimped KD166T 17 Pro-Flex TM Plus 195 TNC male crimped KD166M 17 Pro-Flex TM Plus 195 Mini-UHF male KE166U 17 Pro-Flex TM Plus 195 FME Female KE166UMT 17 Pro-Flex TM Plus 195 FME Female*** K44/5PCK 3/8 Snap-In Rooftop Mount for Quarter Wave Antennas Length of Coax Coax Connector K44//5PCK N/A Sold Separately None Description Length of Coax Coax Connector K45/5PCK K45//5PCK 3/8 Hole Snap-In Rooftop Mount Pack of 5 adapters for Rooftop Mounts N/A N/A N/A * Connectors are shipped loose. Connectors may be attached upon request for an additional charge ** High frequency mount to be used with (B)MEFC49005HF, (B)MEFC58005HF, MEF- C2327HF and MLPV4900NGP *** Plus MINI-UHF to FME and TNC to FME adapter loose For other connector options, please refer to the Mobile Antenna Mounts Configurator Part Number Guide.

62 MOBILE ANTENNAS Permanent Mounts NMO Brass NMO Style Series with Gold Contact Pin and Brass Nut Ring Mount 3/4 hole; 1-1/8-18 thread; installs from above Length of Coax Coax Connector Type NMO58AU-NC 17 RG-58A/U None N/A NMO34 17 N/A None N/A NMOPFP195-NC 17 Pro-Flex Plus 195 None N/A NMO58U-NC 17 RG-58/U None N/A NMO58UBN 17 RG-58/U BNC Crimp NMO58UFFME 17 RG-58/U Female FME* Crimp NMOPFP195FFME 17 Pro-Flex Plus 195 Female FME* Crimp NMO58UMSMA 17 RG-58/U Male SMA Crimp NMOPFP195MSMA 17 Pro-Flex Plus 195 Male SMA Crimp NMO58UNCP 17 RG-58/U N Crimp NMO58UNSO 17 RG-58/U N Solder NMOPFP195RPC 17 Pro-Flex Plus 195 Reverse Polarity TNC Crimp NMO58UTSP 17 RG-58/U PTFE PL259 Solder NMO58AUSP 17 RG-58A/U PL259 Solder NMO58AUCP 17 RG-58A/U PL259 Crimp NMO58UCP 17 RG-58/U PL259 Crimp NMOPFP195CP 17 Pro-Flex Plus 195 PL259 Crimp NMO58UCP 17 RG-58/U PL259 Crimp NMOPFP195C 17 Pro-Flex Plus 195 TNC Crimp NMO58UC 17 RG-58/U TNC Crimp NMOPFP195PL 17 Pro-Flex Plus 195 Mini-UHF Crimp NMO58UPL 17 RG-58/U Mini-UHF Crimp NMO58AUPL 17 RG-58A/U Mini-UHF Crimp * Connectors are attached on these models only. For all other models, connectors are shipped loose. Connectors may be attached upon request for an additional charge. For other connector options, please refer to the Mobile Antenna Mounts Configurator Part Number Guide.

63 MOBILE ANTENNAS Permanent Mounts Stainless Steel SM Series 3/4 hole; 1-1/8-18 thread; installs from above Length of Coax Coax Connector* Type SM34 None N/A None N/A SM-NC 17 RG-58A/U None N/A SMC-NC 17 RG-58/U None N/A SMML195-NC 17 Pro-Flex Plus 195 None N/A SMFLC-NC 17 RG-58 PTFE SM 17 RG-58A/U PL259 Solder SMCP 17 RG-58A/U PL259 Crimp SMSP 14 RG-58A/U PL259 Solder SMPCP 17 RG-58/U PL259 Crimp SMP 17 RG-58/U None SMML195P 17 Pro-Flex Plus 195 PTFE PL259 SMPL 17 RG-58/U Mini-UHF Crimp SMML195PL 17 Pro-Flex Plus 195 Mini-UHF Crimp SMML195RPC 17 Pro-Flex Plus 195 Reverse Polarity TNC Crimp SMML195C 17 Pro-Flex Plus 195 TNC Crimp SMC 17 RG-58/U TNC Crimp SMBN 17 RG-58/U BNC Crimp SMML195BN 17 Pro-Flex Plus 195 BNC Crimp SMML195NCP 17 Pro-Flex Plus 195 N Crimp SMML195MSMA 17 Pro-Flex Plus 195 Male SMA Crimp N/A PTFE PL259 Solder Solder SM *Connectors are shipped loose. Connectors may be attached upon request for an additional charge. For other connector options, please refer to the Mobile Antenna Mounts Configurator Part Number Guide.

64 MOBILE ANTENNAS Trunk Lid/Trunk Groove Mounts 1-1/8-18 thread; trunk/hood groove bracket mount TGBWP Series Length of Coax Coax Connector * Cable Exit Angle Type TGBWP45-NC 17 RG-58A/U None 45 N/A TGBWP45C-NC 17 RG-58/U None 45 N/A TGBWP45 17 RG-58A/U PL Crimp TGBWP45C 17 RG-58/U TNC Plug 45 Crimp TGBWP45PL 17 RG-58/U Mini-UHF 45 Crimp TGBWP45FFME 17 RG-58/U Female FME* 45 Crimp TGBWP45NCP 17 RG-58/U N 45 Crimp TGBWP45 1-1/8-18 thread mount; trunk lid mount T Series Length of Coax Coax Connector * Type TTT N/A None None N/A T-NC 17 RG-58A/U None N/A TC-NC 17 RG-58/U None N/A T 17 RG-58A/U PL259 Solder TP 17 RG-58/U PTFE PL259 Solder TBN 17 RG-58/U BNC Crimp TC 17 RG-58/U TNC Crimp TNCP 17 RG-58/U N Crimp TPL 17 RG-58/U Mini-UHF Crimp T Black 1-1/8-18 thread; all metal trunk lid mount BMT Series BMT Length of Coax Coax Connector * Type BMT-NC 17 RG-58A/U None N/A BMTC-NC 17 RG-58/U None N/A BMT 17 RG-58A/U PL259 Solder BMTBN 17 RG-58/U BNC Crimp BMTC 17 RG-58/U TNC Crimp BMTPL 17 RG-58/U Mini-UHF Crimp *Connectors are shipped loose. Connectors may be attached upon request for an additional charge.

65

66

67 INFRASTRUCTURE ANTENNAS Mounts and Accessories Mounts for Omnidirectional Antennas Description Application MMK1 MMK1924 MMK2 MMK3 MMK4 3-groove backing plate Stainless steel L bracket mount for wall or pipe mount 1-1/2 stainless steel L bracket Base station mount bracket Heavy duty fiberglass base station mount For mounting a 1-5/16 outer diameter antenna to a 1-1/4 maximum outer diameter mast. For mounting an omnidirectional antenna to a 2 maximum diameter mast. Bracket is 6 long with a 5/8 diameter hole for mounting the antenna. For mounting an antenna with a base connector to a 2 maximum diameter mast. Bracket is 9 long with a 5/8 diameter hole for mounting the antenna. For mounting a 1-5/16 outer diameter antenna to a 1-1/4 maximum outer diameter mast. For mounting an antenna with 2-2/2 maximum diameter onto a 2-1/2 maximum outer diameter mast. MMK8A Aluminum MFB mount bracket For mounting a 1-1/4 diameter antenna to a 2-1/2 maximum diameter mast. 1 MMK9 Aluminum MFB mount bracket For mounting a 1-5/16 diameter antenna to a 2-1/2 maximum diameter mast. 1 MMK12 BAM1005 Heavy duty sand cast mount bracket Light duty parallel or perpendicular pipe to pipe clamp. For mounting yagi or omnidirectional antenna up to 3.00 maximum diameter mast. Qty per Assembly Mounts to legs, towers, accessories with OD pipe MMK1 MMK1924 MMK2 MMK3 MMK4 MMK8A MMK9 MMK12 MMA1 BAM1005

68 INFRASTRUCTURE ANTENNAS Mounts and Accessories Mounts for Directional Antennas Description Application MBSWM Wall mount For wall mounting antennas of up to 2-1/4 in diameter. 1 MPAB7 MPAB8 MPAB8W MPAB14 Heavy duty outdoor adjustable mount with +/-35 uptilt/downtilt adjustment Heavy duty outdoor adjustable mount with 17 uptilt/downtilt adjustment Heavy duty outdoor adjustable mount with 17 uptilt Heavy duty outdoor cast aluminum adjustable hose clamp Adjustable outdoor mounting bracket for MP XF 800/900 MHz directional panel antennas. One 6 and one 8 bracket. Adjustable outdoor mounting bracket for MPXF 800/900 MHz directional panel antennas. Two 6 brackets. Downtilt adjustment / Adjustable outdoor mounting bracket for MPXF 800/900 MHz directional panel antennas. Two 6 galvanizing brackets. Adjustable outdoor hose clamp for XF series panel antennas for mounting up to 1.6 maximum diameter MYK1 Mount kit for 7/8 boom yagis For mounting 7/8 diameter boom yagis to a 1-5/8 maximum diameter mast. 1 MYK2 Mount kit for 1-1/4 boom yagis For mounting 1-1/4 diameter boom yagis to a 2 maximum diameter mast. 1 MYK3 Heavy duty mount for 7/8 boom yagis For mounting 7/8 diameter boom yagis to a 2 maximum diameter mast. 1 MYK4 MYK10 BWC1001 BWC1001A BWC1015 Mounting kit for bottom dipole fiberglass base station antennas Heavy duty cast yagi bracket Yagi clamp Yagi clamp Rotational perpendicular yagi clamp Qty per Assembly For mounting to a 2 maximum diameter mast. 1 For mounting a 7/8 OD yagi to a 2-1/2 maximum OD mast. Adjustable for vertical or horizontal polarization. Fits mast OD of Mounts to legs, towers, accessories with OD Fits mast OD of Mounts to legs, towers, accessories with OD Fits mast OD of Mounts 90 to legs, towers, accessories with OD MBSWM MPAB7 MPAB8 MPAB14 MYK1 MYK2 (front) MYK3 MYK4 (front) MYK10 BWC1001(A) BWC1015

69 MOBILE ANTENNAS Antenna Parts and Accessories Miscellaneous Mobile Accessories Part Number BMMB34 BNUT//20PCK CNUT//20PCK ORNG//100PCK BTGB34 MAX//5PCK MMB34 MMGSK MRC//25PCK TGB34 K35/25* K37/25* K39/25* K332 Description 3/4 mirror mount, black 3/4 brass nut, 20 pack set Bright chrome mount nut for 1/4 wave, 20 pack set O-ring for 3/4 mounts, 100 pack set 3/4 L bracket, black Max Base, contact washer, 5 pack set 3/4 mirror mount, chrome Seal gaskets, fit around 3/4 mount nut, 6 pack set Chrome rain cap, 25 pack set 3/4 hole L bracket, chrome 1.5 (38.1 mm) diameter rubber plug for covering 3/4 (19.1 mm) hole after antenna removal (31.8 mm) diameter rubber plug for covering 3/8 (9.5 mm) hole after antenna removal. 1.5 (38.1 mm) diameter rubber plug for covering 7/8 (22.2 mm) hole after antenna removal. Ground plane disk provides ground plane for fiberglass-bodied vehicles. BMMB34 BTGB34 TGB34 K35 K37 K39 K332 Ground Plane Disk

70 INFRASTRUCTURE ANTENNAS Omnidirectional BOA Series PCTEL Carrier Grade 900MHz Omnidirectional Base Station Antennas The BOA 900MHz omnidirectional base station antennas consist of a linear array, encapsulated in a heavy duty fiberglass radome with a thick walled 6061-T6 aluminum mounting base for reliable long term use. This rugged design allows the antennas to withstand harsh environments and is ideal for Industrial Wireless and SCADA applications. The BOA series is DC grounded and is UPS ship pa ble. BOA 900MHz antenna (left); Bottom view (top right); BAM1005 mount (bottom left); MMK5 mount (bottom right) UV Stable Light Gray Fiberglass Radome Hard-Coat Anodized Mounting Base Galvanized Mounting Hardware Removable Drain Plug for Upright or Inverted Mounting RF/Electrical Specifications Frequency Range Nominal Gain Return Loss SWR E-Plane Beamwidth BOA MHz 5.1 dbi/3 dbd > 14 db < BOA MHz 8.1 dbi/6 dbd > 14 db < BOA MHz 11.1 dbi/9 dbd > 14 db < Technical Data Maximum Power: 250 watts Nominal Impedance: 50 ohms Radome Material: Pultruded fiberglass (2 outside diameter) ESD Protection: DC grounded Rated Wind: 125 mph Termination: N female bulkhead Mounting Hardware: BAM1005 or MMK5 (Included) Mechanical Specifications Weight Height Bending Moment at Rated Wind Lateral Thrust at Rated Wind Equivalent Flat Plate Area BOA lbs ft-lbs 29 lbs 0.77 ft 2 BOA lbs ft-lbs 38 lbs 0.95 ft 2 BOA lbs ft-lbs 74 lbs 1.7 ft 2

71 NETWORK CONNECTIVITY SOLUTIONS Recessed Ceiling Enclosures Universal Ceiling Tile Enclosure with 6 Lead, Dual-Band MIMO Antenna SP-RCT-004-SWA6 PCTEL s newest ceiling tile enclosure model, SP-RCT-004-SWA6, is designed with a deeper pocket and six dual-band antenna leads to accommodate nearly all major manufacturer APs and MIMO technologies. Our ceiling tile enclosure is a convenient, secure method to assist in preventing theft and tampering of WLAN radio equipment for locations requiring an aesthetically pleasing, low profile footprint. The enclosure is a drop-in replacement for most standard 2 x2 suspended ceiling tile systems making installation fast and simple. Each unit includes an internal radio mounting kit and mounting hardware. Steel enclosure with hinged doors Matching antenna with six ports, all dual-band WiFi Works with almost all major WiFi radios, including 3, 4, and 6 port MIMO Powder coated white to match most ceiling tiles Easy to mount to most recessed ceiling tile environments Key lock/latch included Standard 24 x 24 (600 x 600 mm) ceiling tile footprints Fits 2 x 4 (600 x 1200 mm) tile footprint with minor tile trimming Aesthetically designed to accommodate a safe and secure office environment Includes mounting hardware Weight and Dimensions Weighs less than 14 lbs 24 x 24 x 7 (L x W x D) Enclosures are fully customizable. Contact customer support for specific requirements PCTEL, Inc. All Rights Reserved. Product prices, materials and specifications are subject to change without notice. PCTEL and PCTEL Simplifying Wireless are registered trademarks or trademarks of PCTEL, Inc. All other brand names, product names or trademarks belong to the their respective holders.