Product Catalog ISO9001:2008 CE ROTARY ENCODER TEMPERATURE SENSOR TEMPERATURE CONTROLLER SOLID STATE RELAY

Transcription

1 MAXWELL Product Catalog ISO9001:2008 CE MS-1DA TEMPERATURE CONTROLLER SOLID STATE RELAY MS-1AA MS-3DA Heatsink ROTARY ENCODER TEMPERATURE SENSOR PROXIMITY SENSOR CAPACITIE SENSOR Tel: Fax:

2 Single Phase Solid State Relay MS-1DA Series MS-1AA Series A wide range of models with 10 to 120A output currents Maximum load capacity is 660AC 1:Basic Model Nmae 2:Rated Load oltage 48: 480AC 66: 660AC MS-1AA 1:Basic Model Nmae MS-1AA: Maxwell 1 phase SSR(AC to AC type) 2:Rated Load oltage 48: 480AC 66: 660AC DC to AC type AC to AC type MS-1AA4840:single phase AC to AC SSR(40A load 480AC) 5-32DC 480/ DC 3-15mA DC 8mA 0.1KG 480/660 90~280AC 3-12mA DC 8mA 0.1KG 480AC 2

3 Single Phase Solid State Relay MS-DD Series A Wide Range of models with 10 to 120A Output currents and Up to 480DC output oltages All models with the same universal standard size Operation indicator(red ) enables monitoring operation Protective cover for greater safety DC input and DC output Fast response and robust No noise during the operation Mosfet output Ordering Information(60 DC Load type) MS-DD MS-DD: 2:Rated Load oltage 60: 60DC 100 : 100A 120 : 120A Maxwell 1 phase SSR(DC to DC type) Ordering Information(110/220/480 DC Load type) MS-DD MS-DD: 2:Rated Load oltage 110 : 110DC 220 : 220DC 480 : 480DC Maxwell 1 phase SSR(DC to DC type) DC to DC type MS-DD6010: DC to DC SSR(10A load 60DC) 100: 100A 120 : 120A MS-DD11010: DC to DC SSR(10A load 110DC) Specifications(60DC Load type) Wiring and Dimensions 43mm Load oltage Control oltage Control Current On oltage Drop Off-leakage Current On-off Time Dielectric Strength Insulation Resistance Ambient Temperature Mounting Indicator Weight mm 28mm mm 25mm 3 2 Input Load 57.4mm 5-32 DC 5-50mA DC 60DC 1.5 2mA 10mS 2000 AC 500M /500DC C~+75 C Chassis Mount Specifications(110/240/480DC Load type) Load oltage Control oltage Control Current On oltage Drop Off-leakage Current On-off Time Dielectric Strength Insulation Resistance Ambient Temperature Mounting Indicator Weight ~32DC 110DC / 220DC / 480DC Control Circuit 0.1KG 5-32 DC 5-25mA DC 2.3 2mA 10mS 2000 AC 500M /500DC C~+75 C Chassis Mount 0.1KG Output Circuit 21mm mm Load 5-60DC 5-110DC DC DC _ + 3

4 Three Phase Solid State Relay MS-3DA Series MS-3AA Series A Wide Range of models with 10 to 200A Output currents Up to 1200AC output oltages All models with the same universal standard size Operation indicator(red ) enables monitoring operation Protective cover for greater safety Built-in RC Snubber Fast response and robust Zero cross function No noise during the operation Ordering Information(DC control AC type) MS-3DA DC to AC type AC to AC type MS-3DA: Maxwell 3 phase SSR(DC to AC type) 2:Rated Load oltage 38: 380AC 48: 480AC 66: 660AC 120: 1200AC 100: 100A 120: 120A 150: 150A 200: 200A MS-3DA3825: Three phase DC to AC SSR(25A load 380AC) Ordering Information(AC control AC type) MS-3AA MS-3AA: Maxwell 3 phase SSR(AC to AC type) 2:Rated Load oltage 38: 380AC 48: 480AC 66: 660AC 120: 1200AC 100: 100A 120: 120A 150: 150A 200: 200A MS-3AA3825: Three phase AC to AC SSR(25A load 380AC) 380 / 480 / 660 / DC 90~280AC DC Control:5-32DC AC Control:90~280AC Remark: There is no polarity for AC load side 4

5 Single Phase Power Regulator MS-1D Series MS-1R Series A Wide Range of models with 10 to 120Amps 220AC load or 380AC load Analog input/potentiometer input All models with the same universal standard size Operation indicator(red ) enables monitoring operation Protective cover for greater safety Resistance input or oltage input Fast response and robust No noise during the operation Ordering Information(Resistance input) MS-1R MS-1R: Maxwell oltage Regulator, potentiometer control 2:Rated Load oltage 38: 380AC Load 100 : 100A 120 : 120A Ordering Information(Analog input) MS-1D MS-1D: Maxwell oltage Regulator analog input 2:Rated Load oltage 22: 220AC Load 38: 380AC Load 100 : 100A 120 : 120A 4:Input Signal B: 0-10DC C: 4-20mA 4 Analog input Potentiometer Control Specifications(Potentiometer input) Load oltage Control Control Current On oltage Drop Off-leakage Current On-off Time Dielectric Strength Insulation Resistance Ambient Temperature Mounting Indicator Weight Specifications(Analog Input type) Wiring and Dimensions 43mm Load oltage Control oltage Control Current On oltage Drop Off-leakage Current On-off Time Dielectric Strength Insulation Resistance Ambient Temperature Mounting Indicator Weight 44.8mm 28mm mm Specification of MS serials SSR are subject to change without prior notice mm 3 2 Input Load 57.4mm 380AC 0-470Kü (220AC) 0-560Kü (380AC) 4-20mA _ N/A 1.5 2mA 2500 AC 100M /500DC C~+75C Input Control N/A 0.1kg 220AC / 380AC 4-20mA/0-10DC DC 4-20mA/0-10DC 1.5 2mA 10mS 2000 AC 500Mü /500DC C~+75C 0.1kg Phase control circuit 57.4L * 44.8W * 28H 21mm mm Load 220AC ~ ~ 5

6 Single Phase High Precision Power Regulator MS-1D--P Series A Wide Range of models with 10 to 400Amps 220AC load or 380AC load Analog input(0-10dc,4-20ma,0-5dc) All models with the same universal standard size Operation indicator(red ) enables monitoring operation Good precision, support multiple inputs Built-in buffer, to protect SCR against surge amps Input section and output section isolated No noise during the operation Ordering Information MS-1D MS-1D: Maxwell oltage Regulator 2:Rated Load oltage 22: 220A 38: 380A 100 : 100A 120 : 120A 200 : 200A 300 : 300A 400 : 400A 4:ersion Code P 4 P: For P series voltage regulator Specifications Load oltage Control Control Control Dielectric Strength Insulation Resistance Ambient Temperature Mounting Indicator Weight 220AC / 380AC 0-10DC Rated( 1.8DC -9.8DC) 0-5DC Rated( 0.8DC -4.6DC) 4-20mA DC Rated( 5.5mA -19mA) 2500 AC 100M /500DC C~+75C 0.38kg High precision Works with multiple inputs Connection Diagram 4 MAXWELL Caution and Warnings Specification of MS serials SSR are subject to change without prior notice +5DC CON COM mA DC oltage between 1 and 2 must have the same phase as voltage between 3 and 4 Remark: Terminal 7 for COM. negative for input signal Terminal 8 for 0-10DC input, positive terminals Terminal 9 for 4-20mA input, positive terminal Terminal 6 for 0-5DC input, positive terminal Terminal 5 is +5DC aux power, power source for potentiometer manual control 1.Appropriate heatsink must be used together with the unit 2.All terminals must be fasten tightly otherwise heat will accumulated on terminals 3.Cooling fans must be included when amps larger than 20amps and ambient temp higher 40C. 4.oltage between load(terminal 1 and 2) must have the same phase as voltage between terminal 3 and 4. 5.Always make sure a correct wiring to enable a appropriate control 6

7 Three Phase Power Regulator MS3-D Series MS-3DA/AA Serials Linear phase-shift control, excellent stability, high precision Modularized design, safer and reliable Small size, easy to install and wiring acuum welding technology, good quality and robust. Rated voltage: Three phase 380AC(four wires) Rated voltage for cooling fans: 220AC Rated amps: 10A/25A/40A/60A/80A/100A/120A Frequency: 50/60HZ Control signal: 4-20mA, 0-5DC, 0-10DC. Ambient temperature: Maximum temperature 47C Maximum humidity 90%RH Ordering Information MS3 4 Ms3: Maxwell Three Phase Power Regulator 2:Control Type D: Specifications Rated voltage Rated current Operation frequency Output mode Control signal Ambient Linear Control 3:Rated Load oltage 38: 380AC 4:Rated Load Current MS3-D3825A: Three phase power regulator 25A with control signal as 0-5DC Cooling fans 0 60: 40A 100: 100A 120: 120A 5:Control Signal A: 0-5DC input B: 0-10DC input C: 4-20mA input 380AC 10A/25A/40A/60A/80A/100A/120A 50/60HZ Phase output 4-20mA 0-5DC 0-10DC 0 Maximum temperature 47C/Maximum humidity 90%RH 220AC Basic Type Analog Control Wiring Diagram Dimensions L W A B A1 B1 C1 Input Output A2 B2 C2 LR1 LR2 LR3 B A N +5 CON COM Warning and Precautions(very important) A B C N Three phase 380AC Control signal Installation dimensions: W(90mm)*L(80mm) Overall dimensions: W(100mm)*L(110mm)*H(145mm) 1:The main circuit adopts three-phase four wire input without requirement for phase sequence 2:SCR with high amps of current flow through, be sure to tighten the terminal (A1 B1 C1 and A2 B2 C2) at its maximum extend. otherwise SCR might be damaged by heat generated around the terminals. 3:When Y connection used for load, the center of Y should be connected with zero line, otherwise, relative equilibrium of the three phase is required 4:When load greater than 15KW, Heatsink is a must for the SCR, and heat conducting silicon grease should be applied between chassis of SCR and the heatsink, and cooling fan is a must for the heatsink 5:Make sure to use semi-conductive fast fuse for overload protection 6:Make sure to pick proper heatsinks when load more than 15KW 7

8 Three Phase SCR Power Regulator TC Series A wide range of models with up to 250 amps output currents Work with 220AC and 380AC main source arious input signal, input field configurable, easy to use arious indications for input, output, and error for easy monitoring Over temperature protection, output terminated once over temp occurs Maximum and minimum output configurable Built-in buffer module, unit protected against surge amps Great linearity, strong anti-interference ability Multiple wiring arrangement, offer various control possibilities Heater break alarm optional Built-in maximum and minimum output tuning switch TC 4 1:Basic Model Nmae TC: Maxwell TC Series Power Regulator 2:(power supply for SCR itself) 1: 110AC 2: 220AC 4: 380AC 3:Main Controlled Source 2: 4: Item Nubmer 220~240AC 340~380AC Rated Current(Amps) High Precision and Robust 4:Main Controlled Current 100: 100 amps 125: 125 amps 150: 150 amps 180: 180 amps 200: 200 amps 250: 250 amps TC :TC SCR units, 220 aux power, 380 main controlled source, 180 amps Input Signal Configuration Installation Applicable Overall Dimension(mm) Dimension(mm) Weight(kg) Power(KW) Length Width Height Length Width TC TC TC TC TC TC This SCR supports 0-5DC,0-10DC,4-20mA DC input just put the jumper at respective position, the input signal can be changed. 0-10DC: Put the P1 jumper at S3 spot Phase shift control 0-5DC: Put the P1 jumper at S2 spot 4-20mA : Put the P1 jumper at S1 spot 20% output Factory default input is 4-20mA 50% output 90% output Cooling Fans cooling Panel Description Dry contact oltage Input signal A1 A2 M Aux Supply Input Signal DC+5 Potentiometer mA/ K 8 Wiring details :Main Controlled source 2: Aux power supply 3:Input signal labeling 4: rated amps labeling 5:arisou indicator POWER: Aux power feed indicator IN: Input signal indicator OUT: SCR output indicator ERR: SCR over temperature indicator 6:Output lowest limit tuning switch 7:Output highest limit tuning switch 8:Terminal arrangements labeling There are different ways to wire the SCR for different application, please check carefully on this part before using (1) Analog input( ma, m), and output ratio external adjustable, for example, can manually adjust the output from 0%~100% Input signal >Output ratio external adjustable(0%-100%) >The output ratio will always be 100% When short circuit E3 and E2 (2) Dry contact input, and output ratio external adjustable, for example, can manually adjust the output from 0%~100% >Output ratio external adjustable(0%-100%) >The output ratio will always be 100% When short circuit E3 and E2 8

9 (3) Analog input( ma, m), manual/auto control switchable, output ratio external adjustable, this wiring pretty much the same as type (1) the difference is the manual/auto control is switchable in this mode Input signal (4) Analog input( ma, m), Minimum output ratio can be pre-determined regardless of the input signal, even if input signal is 0 the SCR output will be restrained at its preset value. Input signal Minimum output adjust (5) Analog input( ma, m), Minimum and maximum output ratio can be restrained within a range. The SCR output will not response to input signals if input signals drives the output out of the preset ranges The SCR will work within a range for example 30%~80% Input signal Max. output adjust Min. output adjust When maximum and minimum output set as the same value. SCR output be fixed, and will not respond to the input signal (6) Analog input( ma, m), several SCR units connected together, with one of the units output ration adjustable(0%-100%) Input signal (7) Analog input( ma, m), several SCR units connected together, with one of at 4-20mA input, other units 1-5DC input, maximum 4 SCR units can be connected, all units output ration adjustable (8) Analog input( ma, m), serial connect 2 SCR units together, 2 SCR units controlled by same signals maximum 2 SCR units can be connected, all units output ration adjustable Cautions Input signal 1)For safety, must install a circuit breaks between the SCR and load 2)SCR can not be activated if the load disconnect or current less than 0.5 amps 3)A lot of heat will be generated during the operation. ambient temperature shall be less than 50C,if the cooling is not sufficient and ambient temperature larger than 60C, must use fans to cool the surroundings. 4)SCR operating with very high current, please make sure to fasten the screw firmly. or heat will be generated on the terminals and terminals will be damaged Dimensions and Mounting Cooling Fans Item Specs Units 9

10 < General Features Rated load voltage 380AC~440AC Power supply 220AC oltage input signal: 0-5DC,0-10DC,1-5DC,2-10DC Current input signal: 4-20mA,0-20mA,0-10mA Rated load current 40A, 60A, 75A, 100A. For resistive load Unique Features 3 phase input, auto phase detect Soft start function to protect load and SCR against surge current Integrated display with various indicator for status and error dispaly Integrated heatsink with auto temperature detection with over temperature alarm, SCR output reduce to preset value after alarm on(except T51). Maximum and minimum output configurable Maximum and minimum output configurable Auto/manual control switch RS-485 Mod Bus RTU communication optional(except T-51) Input event function Cautions!!! * SCR can not be operated without load or load current less than 0.5 * Please make sure to tighten the screw securely while wiring the SCR, otherwise extra heat will be accumulated on the terminals results a damage on the SCR * SCR must be mounted vertically on a solid panel without any objects placed above or beneath the SCR to make sure a smooth air flow * If multiple SCR installed at the same control cabinet, the main principle is to make the air flow efficient among each unit * The temperature inside of the control cabinet must be lower than 55 celsius, otherwise a cooling fan must be installed * If two SCR installed paralleled the distance between the two units must be more than CM * It is user s responsibility to make sure your selection on the SCR is compatible with your application * For safety consideration, a circuit breaker must be installed between the load and SCR * Touch the input and output terminals have the same risk even if there is not current at some certain period while SCR is still working * Never ever try to replace the cooling fans when SCR is working * Make sure the load voltage compliance with the ratings of SCR * Always make sure the wiring goes to the correct negative and positive terminals Ordering Information T51/T-6/T-7 4 1:ersion Code T51: T51 series, simplified version with limited function with compare to T6 and T7 T6: T6 series, with more features T7: T7 is the same function as T6, just different size for different mounting space 2:Load type 3: 3 phase load 380AC~440AC 3:Load current 75: 75A 100: 100A( only available for T6) 4:Power Supply 220: 220AC 380: 380AC D: 12-24DC 5:Control signals 1: 0-10mA 2: 0-20mA 3: 4-20mA 7: 2-10DC 6:Alarm 4: 0-5DC 5: 0-10DC 6: 1-5DC M: With alarm and Relay output N: No alarm 7:Communication M: With RS-485 Mod bus RTU N: Without communication feature Panel Discription AL1 POW L1 L2 L3 OUT MAN COM SET STOP RUN A/M C % Connection Diagram INDICATOR SET KEY 3 Phase Power Power Supply AC 220 If you have a selection [ T M-N ] >T7 series >3 phase load >40 amps >220AC for SCR itself >Input 4-20mA >With alarm >Without communication OUT: The flashing frequency indicate the output ratio AL1: Over temperature alarm indicator POW: Power feed indicator L1: Phase indicator, when L1 absence, lights on L2: Phase indicator, when L2 absence, lights on L3: Phase indicator, when L3 absence, lights on MAN: Manual control indicator COM: Communication indicator SET: Parameter setting and configuraion A/M: Manual/auto control switch POW: Power feed indicator <: Left shift key, to shift the display unit < : Decrease key or Stop key : Increase key or Run key Fast fuse, rating at 1.5 x Load amps RS-485 AC1 AC2 B- A+ R S T 4-20mA NO COM NC CC IN- R(250 ohm) IN+ 250 Ohm resistor when input 4-20mA U W +5 NO NC LOAD COM Used with potentiometer DC 0-10mA/DC 0-20mA/DC 4-20mA (switchable between each other) DC 0-5/DC 0-10/DC 1-5/DC 1-10 (switchable between each other) 10

11 AC1 A C2 ON CO M OC B- A+ IN- IN- IN+ +5 A C F AC1 AC2 ON COM OC B- A+ IN+ +5 F2 FAN LINE R S LINE T WARNING U LOAD LOAD W OUT 1 2 SET AL1 OUT POW AL1 L1 POW OUT AL1 POW L1 L2 L3 MAN COM SET WARNING: 1 STOP Do not connect AC power to output terminal s Read the user manual before operation STOP L2 RUN L3 WARNING: Do not connect AC power to output terminals Read the user manual efore operation b L1 L2 L3 2 3/ RUN Power Regual t or MAN 3 / A/M A/M COM Power Regulator Size and Dimensions AC A C INPUT + - C % C Power Re gulator T SET % C % Model T N-N T N-N T N-N Model T N-N T N-N T N-N T N-N Model T N-N T N-N T N-N Size(mm)L*W*H Install(mm)L*W 118*140*118 55* *140* *140*118 55*135 55*135 Size(mm)L*W*H 160*140* *140* *140* *140*145 Size(mm)L*W*H 160*110* *110* *110*148 Install(mm)L*W 120* * * *130 Install(mm)L*W 105* * *100 11

12 MAXWELL Three Phase Reversing Solid State Relay MS-3M Series A Wide Range of models with 10 to 120A Output currents Up to 660AC output oltages All models with the same universal standard size Operation indicator(red ) enables monitoring operation Protective cover for greater safety Built-in RC Snubber Fast response and robust Zero cross function No noise during the operation Ordering Information(480 Load Type) MS-3M Section MS-3M: Maxwell 3 Reversing SSR Section 2:Rated Load oltage 48: 480AC MS-3M4825: Three phase reversing solid state relay 660 Load MS-3M Section MS-3M: Maxwell 3 Reversing SSR Section 2:Rated Load oltage 66: 660AC MS-3M6625: Three phase reversing solid state relay Section 100: 100A Section 100: 100A Specifications(480 Load) Load oltage Control oltage Control Current On oltage Drop Off-leakage Current Reversing time duration Dielectric Strength Insulation Resistance Ambient Temperature Mounting Indicator Weight Specifications(660 Load) Wiring and Dimensions 4.8 Load oltage Control oltage Control Current On oltage Drop Off-leakage Current On-off Time Dielectric Strength Insulation Resistance Ambient Temperature Mounting Indicator Weight / / R R C1 B1 A DC 10-30mA 2 10mA 300mS 2500 AC 1000M /500DC C~+75C (Red Green) 0.3KG DC 10-30mA 2 10mA 300mS 2500 AC 1000M /500DC C~+75C (Red Green) 0.3KG Rv Rv Corotation Reverse C2 B2 A M 33mm 12

13 MaxWell Accessories for SSR Heatsinks for SSR,SCR. Cooling Fans for SSR MS-3DA/AA Serials SSR and HeatSink Compatible checking list Ordering Information(For Single Phase SSR) MW-I HeatSink Unit:mm 80 60(L) 50(H) 60 (L) MW-I:Compatible with Single Phase SSR with load at 10A and 25A(60*50*50) MW-W-A HeatSink MW-W-B HeatSink Unit:mm (W) 48 50(H) 100(W) 0.2KG MW-W-A: Compatible with Single Phase SSR with load at 40A(72*100*50) MW-W-B: Compatible with Single Phase SSR with load at 60A(100*100*50) MW-T HeatSink 80(H) Unit:mm 70(W) 70 (W) Compatible SSR: Single Phase SSR with load at 80A/100A/120A.(80*70*80) iew from top MW-W-A 50(W) 100(L) 80 (L) HeatSinks and Fans ITEM NO SIZE Compatible SSR Remark MW-I 60x50x50 10A/25A Single Phase SSR MW-W-A 72x100x50 40A Single Phase SSR MW-W-B 100x100x50 60A Single Phase SSR MW-T 80x80x70 80A/100A/120A Single Phase SSR MW-L 150x88x35 10A/25A Three Phase SSR MW-H-A 110x80x80 40A Three Phase SSR MW-H-B 150x80x80 60A Three Phase SSR MW-Y-A 110x125x135 80A Three Phase SSR MW-Y-B 150x125x A/120A Three Phase SSR MW-Y-C 170x125x A/200A Three Phase SSR iew from top iew from top Unit Weight: 0.1KG 100(W) 0.3KG MW-W-B 72(L) Unit Weight: 0.4KG Ordering Information(For Three Phase SSR) MW-L HeatSink Compatible SSR: Three Phase SSR with load at 10A/25A.(150*88*35) MW-H-A HeatSink MW-H-B HeatSink (W) 0.5KG MW-H-A: Compatible with three phase SSR with load at 40A(110*80*80) MW-H-B: Compatible with three phase SSR with load at 60A(150*80*80) MW-Y-A HeatSink MW-Y-B HeatSink MW-Y-C HeatSink Unit:mm 125(W) 80 Unit:mm Unit:mm 135(H) 125(W)(1.5KG) 110(L) MW-Y-A:Compatible with three phase SSR with load at 80A(110*125*135) MW-Y-B:Compatible with three phase SSR with load at 100A/120A(150*125*135) MW-Y-C:Compatible with three phase SSR with load at 150A/200A(170*125*135) MF-1-B-8-110/220 MF-1-S-8-110/220 MF-1-B :Ball bearing Fans(110) Size:80mm*80mm, with Metal Protector MF-1-B :Ball bearing Fans(220) Size:80mm*80mm, with Metal Protector MF-1-S :Sleeve bearing Fans(110) Size:80mm*80mm, with Metal Protector MF-1-S :Sleeve bearing Fans(220) Size:80mm*80mm, with Metal Protector iew from the top 150(W) MW-H-A 110(L) 125(W)(1.9KG) 150(L) 88(L) iew from the top Unit Weight: 0.4KG 80(W) 0.8KG iew from the top MW-H-B 125(W)(2.3KG) 150(L) MW-Y-A MW-Y-B MW-Y-C MF-1-B /220 MF-1-S / (L) MF-1-B :Ball bearing Fans(110) Size:120mm*120mm, with Metal Protector MF-1-B :Ball bearing Fans(220) Size:120mm*120mm, with Metal Protector MF-1-S :Sleeve bearing Fans(110) Size:120mm*120mm, with Metal Protector MF-1-S :Sleeve bearing Fans(220) Size:120mm*120mm, with Metal Protector 13

14 ELECTRICAL LIMITED Add:NO.68 JianMeiLi Industrial Park, HaiCang district, XiaMen,FuJian, China Tel: Fax: In case we didn t get your , please send your inquiry to our alternative mail @qq.com Thank you very much