PF100 Active power factor correction and harmonic attenuation module Vin, 100 watts
|
|
|
- Clarence Warren
- 5 years ago
- Views:
Transcription
1 PF Active power factor correction and harmonic attenuation module 8 6 Vin, watts HOW TO ORDER Series Unscreened (I) or Screened (M) Total Power PF I - A INPUT CHARACTERISTICS Options: A - Pins out baseplate of unit C - Thru hole inserts (. DIA) I - M. inserts FEATURES Meets all Requirements of MIL - STD - 99, section A Meets CE and CE of MIL - STD - 6 without external filter Meets all requirements of MIL - STD - 7E Meets all requirements of ABD..8. Non-latching Over Temperature Protection Non-latching Overvoltage Protection short circuit protection, automatic recovery after short circuit removal Isolated DC Good TTL Signal (Open collector) Full Watts of output power from 8 VAC to 6 VAC and up to baseplate temperature Utilizes non isolated boost topology Dual Nominal Voltage setting: 7V for 8-7 Vrms Input 8V from 8-6 Vrms Input Environmental Screening available OUTPUT CHARACTERISTICS Input Voltage (Single Phase) Input Frequency Range Inrush Vrms Power factor at Vin / 6 - Hz Vin / 8Hz Vin / Hz Vin / Hz Vin / 8Hz Efficiency at Vin / 6Hz Vin / Hz Vin / Hz Vin / Hz Vin / 8Hz Typ Max. 6 8 VAC Hz A A Nominal No Load Voltage Setting Power () Load Regulation (No Load - ) Line Regulation (Low Line - High Line) Ripple P - P (6 Hz/ VAC input) Overvoltage Protection ( of ) 7 or 8 78 or 8.. Transient Response: or - - step load Overshoot / Undershoot Recovery time (to of Vout) Temperature Drift (Holdup) Capacitance Typ. ±6. Max. V W Vout Vout Vout Vou Vout ms /.. Not Included (specs are based on μf) All specifications are with nominal input voltage under full output load conditions and holdup capacitance of μf, unless otherwise noted. Specifications subject to change without notice. >> For additional information, call..86 or Orders-EP@eaton.com
2 PF Active power factor correction & harmonic attenuation module TEMPERATURE CHARACTERISTICS ISOLATION CHARACTERISTICS Operating Storage - Ambient Over Temperature Shutdown Hystensis Thermal Resistance Case- Ambient - - Typ Max /W Isolation: Input/ to Base Insulation VDC VAC MOhm M- GRADE - ENVIRONMENTAL SCREENING MECHANICAL CHARACTERISTICS Stabilization Bake + for hours similar to MIL -STD -88, M8., Condition B Temperature Cycling cycles at - to + (transition period / minute) similar to MIL -STD -88, M, Condition B Burn in 6 8 minimum Final Testing Full ATP I- GRADE - ENVIRONMENTAL SCREENING Burn in Final Testing 6 minimum Full ATP Weight (Max.) Size Volume Material: Finish: Pin Case Baseplate Case Baseplate Mounting: Standard Option - I Option - C.. x. x. 6 x 8. x oz. grams inch mm inch cm Brass (Solder Plating) Steel (8 Gauge CRS) Aluminum (66-76) Nickel Plating None - THD Inserts Metric M. -. Inserts. DIA Thru Hole CASE DRAWINGS - PF STANDARD./.8./.6./8. - UNC-B PLACES.6/6../.6 ACA ACN TOP + OUT - OUT ON/OFF ON/OFF RTN DC OK DC OK RTN /6../7../8../.7./..8/..6/../.6./.8./.7. ±.. ±. 8 PLACES. ±./ 8. ±.8 FRONT Tolerances: inches - x.xx x.xxx = ±. = ±. mm - x.x x.xx = ±.8 = ±. All specifications are with nominal input voltage under full output load conditions and holdup capacitance of μf, unless otherwise noted. Specifications subject to change without notice. >>
3 CASE DRAWINGS - PF OPTION -A; PINS OUT BASEPLATE OF UNIT./.8./.6./8. - UNC-B PLACES.6/6../.6 ACA ACN TOP + OUT - OUT ON/OFF ON/OFF RTN DC OK DC OK RTN /6../7../8../.7./..8/..6/../.6./.8./.7 FRONT./.7 MIN. ±.. ±. 8 PLACES CASE DRAWINGS - PF OPTION -C; THRU HOLE INSERTS./.8./.6./8. TOP./6../7.. DIA THRU PLACES.6/6../.6 ACA ACN + OUT - OUT ON/OFF ON/OFF RTN DC OK DC OK RTN /8../.7./..8/..6/../.6./.8./.7. ±./ 8. ±.8. ±.. ±. 8 PLACES FRONT All specifications are with nominal input voltage under full output load conditions and holdup capacitance of μf, unless otherwise noted. Specifications subject to change without notice. >>
4 Performance characteristics Power Factor I. Power Factor vs. Input Voltage 6 Hz Hz 8 Hz Input Voltage (rms) Power Factor II-a. Power Factor vs. Power 6 Hz Vac Hz Vac Hz Vac 8 Hz Vac Power (watts) Power Factor. II-b Power Factor vs. Power.9.8 Hz Vac 6 Hz Vac Hz Vac.7 8 Hz Vac Power (watts) Efficiency III-a. Efficiency vs. Input Voltage III-b. Efficiency vs. Input Voltage 97 6 Hz Hz 9 Hz 9 Efficiency 8 Hz 9 8 Hz 89 7 Vdc, FL 8 Vdc, FL 87 6 Hz Efficiency IV. Efficiency vs. Power 9 Vrms/6 Hz 8 Vdc 9 Vrms/6 Hz 7 Vdc Input Voltage (Vrms) V-a. AC Input Voltage & Current Input Voltage (Vrms) V-b. AC Input Voltage & Current Power (watts) VI. Ripple A/div V/div Input Voltage A/div V/div Input Voltage V/div Vin = Vrms/6Hz, Vin = Vrms/6Hz, Vin = Vrms/6Hz, FL Input Current Vin = Vrms/8Hz, FL Input Current Time: ms/div Time: us/div Time: ms/div VII. Load Transient Response VIII. Line Transient IX-a. Harmonic Distortion. A/div V/div Voltage Vin = Vrms/6Hz - Load Step Time: ms/div Current V/div V/div Vin =Vrms to 98Vrms to Vrms, 6Hz Time: ms/div Voltage Input Voltage of Fundamentals.... Vin =Vrms/6Hz, Vout =7 Vdc, FL Individual Odd Harmonics >> 8
5 EMI filters IX-b. Harmonic Distortion X-a. Inrush Current vs Voltage X-b. Inrush Current vs Voltage of Fundamentals.... Vin =Vrms/8Hz, Vout =7 Vdc, FL V/div A/div Input Current Voltage Vin = Vrms/6Hz V/div A/div Input Current Voltage Vin = Vrms/6Hz Individual Odd Harmonics ms/div ms/div XI. DC Good, Turn-On XII. DC Good, Turn-Off XIII-a. Input Line Dropout V/div V/div DC Good Voltage Vin = Vrms/6Hz, NL V/div V/div Vin = Vrms/6Hz, FL Voltage DC Good Vin = Vrms/Hz, FL. Hold up cap µf Voltage rides through Input Voltage drops for ms Time: ms/div Time: ms/div Time: ms/div XIII-b. Input Line Dropout EMI Plots Vin = Vrms/Hz, FL. Hold up cap 9µF CE-- Voltage rides through Input Voltage drops for ms MIL-STD-6D CE- db/div 8 6 Sweep Data Time: ms/div.... FREQUENCY (MHz) MIL-STD-6D CE- db/div 8 6 Sweep Data CE--.. FREQUENCY (MHz)
6 For additional information, call..86 or Eaton Eaton Boulevard Cleveland, OH United States Eaton.com 7 Eaton All Rights Reserved Printed in USA May 7 Eaton is a registered trademark. All other trademarks are property of their respective owners.
CB75T 75 Watts Output Power
CB7T triple-output DC/DC converters 6 4Vin, 3.3 Vout, 7 watts CB7T 7 Watts Power TRIPLE OUTPUT How to Order: CB 7 T M / / 2 - C-D Series Total Power Triple Unscreened (I) or Screened (M) Main Auxiliary
MW75S single-output AC/DC power supply Power factor corrected Vin, 2 28Vout, 75 watts. I - M3 inserts. Max
MW7S single-output AC/DC power supply Power factor corrected 9 26Vin, 2 28Vout, 7 watts HOW TO ORDER MW 7 - S M / 28 - I Series Total Output Power(W) Single Output Unscreened (I) or Screened(M) INPUT CHARACTERISTICS
FEATURES. Nominal Output Voltage Units Vdc Vdc Watt mc ma ma W db db
NH Watts Power Series Total Power Single (S), Dual (D) Industrial (I) or Military (M) Brown Out ( of Full Load) (fig. I)* No Load Power Dissipation Inrush Charge (fig. VII)* Reflective Ripple Current (fig.
Features. Parallelable. Synchronizable
Transportation Products 86XXX-XX-X-X-99 SL500 Series Data - Data Sheet Sheet Features Input Range from 200 to 400 No Derating from -550 to +000 Efficiency: Up to 9% The SL500 converter is a standalone,
SL500 single-output DC/DC converters Vin, Vout, 500 watts
SL500 single-output DC/DC converters 200 400Vin, 3.3 28Vout, 500 watts Features Input Range from 200 to 400 No Derating from -550C to +1000C Efficiency: Up to 91% The SL500 converter is a standalone, 91%
PF & PFC application notes Active power factor correction and harmonic attenuation modules. Guide to Operation. I. Electrical Description
PF & PFC application notes Active power factor correction and harmonic attenuation modules Guide to Operation I. Electrical Description The PF series are Single-Phase, Wide-AC Input Active-Power Factor
RB single and dual-output DC/DC converters 14 32Vin & 18 32Vin, 5 28Vout, watts
RB single and dual-output DC/DC converters 14 32Vin & 18 32Vin, 5 28Vout, 20 200 watts 200 watt 50 watt 20 watt 100 watt 35 watt A comprehensive line of full military DC-DC converters ideally suited for
RW single and dual-output converters AC and DC inputs, 2 28Vout, watts
RW single and dual-output converters AC and DC inputs, 2 28Vout, 20 200 watts 20 watt 50 watt 200 watt 35 watt 100 watt For additional information, call 310.542.8561 or e-mail: Orders-EP@eaton.com www.eaton.com/powerconversion
S24SP12004 series 40W Single Output DC/DC Converter
FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink 5.8 x25.4 x17.5mm (2.
S24SP05012 series 60W Single Output DC/DC Converter
Model List Model Number S24SP05012 Input Voltage (Range) Output Voltage Output Current Input Current (typ input voltage) Load Regulation Maxcapacitive Load (Cap ESR>=10mohm;Full Efficiency load;5%overshoot
S24SP24003 series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 93% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink 5.8 x25.4 x17.5mm (2. x1.
mto Series Page 1 of 6 MTO Rev C models +5 & ±12 +5 & ±15
28 Volt Input NOT RECOMMENDED FOR NEW DESIGNS mto Series Features 55 C to +85 C operation 16 to 36 VDC input 50 V for 50 ms transient protection Fully isolated Fixed frequency switching Inhibit function
Nominal Output Voltage Set Point Accuracy Load Regulation Line Regulation Ripple P-P (10 MHz) [fig.
NL00 00 Watts Output Power SINGLE AND DUAL OUTPUTS FEATURES How to Order: NL 00 D I / 5 / 5 - A - D Series Total Output Power Single (S), Dual (D) Output Industrial (I) or Military (M) Output Voltages:
RM single and triple-output converters AC and DC inputs, 5 28Vout, watts
RM single and triple-output converters AC and DC inputs, 5 Vout, 50 100 watts 50 watt triple output 50 watt single output 100 watt For additional information, call 310.542.8561 or e-mail: Orders-EP@eaton.com
S24SE/S24DE series 30W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 89% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current
200 WATT TH SERIES DC/DC CONVERTERS
Features 4:1 Input voltage range High power density Small size 2.4 x 2.28 x 0.65 Efficiency up to 90 Excellent thermal performance with metal case Pulse-by-pulse current limiting Over-temperature protection
FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option
S24SE/S24DE series 15W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 89% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current
S24SP series 60W Single Output DC/DC Converter
Model List Model Number Input Voltage (Range) Output Voltage Output Current Input Current (typ input voltage) Load Regulation Maxcapacitive Load (Cap ESR>=1mohm;Full Efficiency (typ.) load;5%overshoot
S24SE/S24DE series 30W Single/Dual Output DC/DC Converter
Model List Model Number Input Voltage Output Voltage Output Current Input Current (typ input voltage) (Range) Max. Min. @Max. Load @No Load Load Regulation Maxcapacitive Efficiency Load (typ.) @Max. Load
PM24S/DR24S series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 92% Wide input range, 9V-36V Package Dimension: Panel Mount: 100.0*56.0*19.0mm (3.94 * 2.20 *0.75 ) Din Rail: 118.6*67.1*23.5mm (4.67 *2.64 *0.93 ) Over voltage protection, hiccup
PFC-600LF UNIVERTER LF Series
. Tel: (8) 964-6 35 Hampden Road Fax: (8) 339-375 PFC-LF UNIVERTER LF Series Watt PFC Front End Full Brick The UniVerter PFC-LF module accepts 85-265 Vac input and converts it to 375 Vdc to power isolated
MOR Single and Dual DC-DC Converters
Features Parallel operation with current share, up to 5 units (540 watts) Output flexibility, trim of % to 110% Operating temperature -55 C to +125 C Input voltage 16 to 40 V Transient protection 50 V
Output Voltage Output Amps Input Range Max. Iin FL Efficiency (Tb=25 C) O/P Set Point
Miniature 4.59 x 2.4 x 0.5. Size High Power Density up to 90.78W/ Inch ³ High Efficiency up to 90.5% at 230VAC (28V) Low Output Noise Metal Baseplate Thermal Protection Over Voltage Protection Current
LCM-120 Line Conditioning Module
Features Powers dc-dc converters requiring 28 Vin Input voltage 12 to 50 VDC Operating temperature -55 to +125 C Works through transients of up to 80 V for up to 120 ms Inhibit function Synchronization
FED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly Option Voltage Quantity Voltage Range Option
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly
150 WATT QSW DC/DC CONVERTERS
Description The 4:1 Input Voltage 150 Watt Single QSW DC/DC converter provides a precisely regulated dc output. The output voltage is fully isolated from the input, allowing the output to be positive or
MHF+ Single, Dual and Triple DC-DC Converters
Features Hermetically sealed case, 0.33 inches (8.38 mm) high Operating temperature 55 to +125 C Input voltage 16 to 40 volts MHF+281R9S 20 to 32 volts - Triple output models 16 to 48 volts Transient protection
C B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
Series RW AC-DC Converters
Series RW AC-DC Converters 20 watt 50 watt watt 35 watt 00 watt The RW series offers a comprehensive line of full military AC-DC / DC-DC power supplies designed for use in airborne, ground fixed and surface
Military (Airborne, ground-fix, shipboard), Ruggedized, Telecom, Industrial Power Supply
M916 SERIES SINGLE OUTPUT POWER FACTOR CORRECTED 1-PHASE AC / DC CONVERTERS Up to 500W Applications Military (Airborne, ground-fix, shipboard), Ruggedized, Telecom, Industrial Power Supply Special Features
VI-HAM. Harmonic Attenuator Modules. Unity Power Factor. Features. Inrush & Short Circuit Protection. ZCS Boost Converter.
VI-HAM Harmonic Attenuator Modules Features Unity Power Factor Safety Agency Approvals: UL, CSA, TÜV, BABT Meets IEC 6100-3-2 for Line Current Harmonic Content Reduces Peak and RMS Line Currents Universal
14 to 50 volt input - 35 watt
Features Input voltage range 14 to 50 volts Transient protection up to 80 volts for one second Indefinite short circuit protection -55 C to +125 C operation Magnetic feedback Synchronization Inhibit function
SPS10-24 Series small size isolated DC/DC converters
SPS10-24 Series small size isolated DC/DC converters Features High Efficiency Wide operating temperature range ( -40 C to +85 C ) Wide 2:1 input range Dimensions 35.60 x 8.50 x 26.0 (mm) Built in over
360 WATT MTW SERIES DC/DC CONVERTERS
Description The 4:1 Input Voltage 360 Watt Single MTW DC/DC converter provides a precisely regulated dc output. The output voltage is fully isolated from the input, allowing the output to be positive or
FMD EMI Input Filters
Features Attenuation to 50 db at 500 khz Operating temperature -55 to +125 C Nominal 28 V input, 0 to 50 V operation Transient rating to 100 V for 100 ms Up to 7 A throughput current Compliant to MIL-STD-461C,
40 Watt TMF Single and Dual Series
Watt TMF Single and Dual Series Efficiency up to 91% 10VDC Isolation MTBF > 328,000 Hours 4:1 Wide Input Over Voltage Protection Short Circuit Protection Six Sided Shielding Remote On/Off Control RoHS
VPTHVM-270 Series HIGH RELIABILITY COTS REGULATED BUS CONVERTER MODULE DESCRIPTION FEATURES
DESCRIPTION The VPTHVM-270 is an Isolated Regulated Bus Converter Module which allows VPT s DV and VPT series 28V input DC-DC converters to operate from a nominal 270V DC input. A wide input voltage range
PM24S/PM24D series 30W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 88% Wide input range, 9V-36V Package Dimension: Panel Mount: 100.0*56.0*19.0mm (3.94 * 2.20 *0.75 ) Din Rail: 118.6*67.1*23.5mm (4.67 *2.64 *0.93 ) Over voltage protection, hiccup
SPS1R5-5 Series small size isolated DC/DC converters
SPS1R5-5 Series small size isolated DC/DC converters Features High Efficiency Wide operating temperature range ( -40 C to +85 C ) Wide 2:1 input range Dimensions 18.50 x 8.50 x 16.0 (mm) Built in over
500 WATT MXW SERIES DC/DC CONVERTERS
4:1 Input voltage range High power density Small size 2.4 x 2.5 x 0.52 Efficiency up to 95.7% Excellent thermal performance with metal case Over-Current and Short Circuit Protection Over-Temperature protection
16 to 50 volts input 25 Watt
Features 16 to 50 volt input Up to 87% efficiency, 42 W/in 3 Available to Class H, MIL-PRF-38534 Undervoltage lockout -55 C to +125 C operation Fully isolated, magnetic feedback Fixed frequency, 500 khz
MAX. OUTPUT POWER 24/48/72/96/110 VDC 5 VDC 6 A 30 W 82% 0RQB-30Y05L. 0 R QB - 30 Y 05 L y. Output Power. Input Range
The 0RQB-30Y05L is an isolated DC/DC converter providing 30 W of output power from a wide input range (24 V, 48 V, 72 V, 96 V, 110 V typical). Standard features include remote on/off, input under-voltage
Output Full Load
SERIES DC-DC CONVERTER 2:1 & 4:1 WIDE INPUT RANGE UP TO 3.3 WATTS FEATURES REINFORCED INSULATION FOR 2VAC WORKING VOLTAGE CLEARANCE AND CREEPAGE DISTANCE :8.0mm/2MOPP 00VAC INPUT TO OUTPUT 2MOPP ISOLATION
Series AW AC-DC / DC-DC Converters
Series AW AC-DC / DC-DC Converters NOTE: THE AW SERIES IS NOT RECOMMENDED FOR NEW DESIGNS DUE TO PARTS OBSOLESCENCE. WE RECOMMEND THE RW SERIES AS A COMPATIBLE DIRECT REPLACEMENT. 20 watt 50 watt watt
Series RM AC-DC / DC-DC Converters
Series RM AC-DC / DC-DC Converters 50 watt triple output 50 watt single output 100 watt The RM series AC-DC/DC-DC power supplies can accept a wide range of input powers making them true multiple input
SPS20 Series small size isolated DC/DC converters
SPS20 Series small size isolated DC/DC converters Features High Efficiency Wide operating temperature range ( -20 C to +71 C ) Wide 2:1 input range Built in over current protection circuit Input Output
The 0RQB-C5U54x is an isolated DC-DC converter that operates from a nominal 24 VDC, 48 VDC source.
The 0RQB-C5U54x is an isolated DC-DC converter that operates from a nominal 24 VDC, 48 VDC source. This unit will provide up to 162 W of output power from a nominal 24 VDC, 48 VDC input. This unit is designed
MFX Single output DC-DC Converters
MFX Single output DC-DC Converters 16 to 50 VoltS input - 50 Watt FeatureS 89 to 93% typical efficiency Wide input range, 16 to 50 volts ±10% trimmable outputs Transient protection up to 80 volts per MIL-STD-704A
48V Output AC/DC Converter Box Type Package
FEATURES Wide input voltage range, 85~265VAC 360W Output Full Load Efficiency up to 93.5% @220VAC; Metal Case Box Type Package Package Dimension: 165.0x115.0x25.4mm (6.50 x4.53 x1.00 ) Operating Temperature
SPS20 Series small size isolated DC/DC converters
18 36Vdc Input, Maximum Power: 20W FEB 10, 2011 SPS20 Series small size isolated DC/DC converters Features High Efficiency Wide operating temperature range ( -20 C to +71 C ) Wide 2:1 input range Built
SLH Single and Dual DC-DC Converters
Features Radiation tolerant space DC-DC converter Single event effects (SEE) LET performance to 86 MeV cm 2 /mg Total ionizing dose (TID) guaranteed per MIL-STD-883 method 1019, radiation hardness assurance
Ripple & Max. capacitive Output Current
0 Watts xxx Series Wide 4: Input Range Single Output Industry Standard /4 Brick -40 C to +0 C Operation 0 VDC Isolation Output Trim ±0% Remote On/Off Year Warranty Dimensions: QSC0:. x.4 x 0. (.9 x. x.
Efficiency (typ.) (Range) Load. Output Current Input Current Reflected Ripple
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Ultra Wide 4:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC
25 Watt QMZ Single and Dual Series
Single and Dual Series Efficiency up to % 10 VDC Isolation 4:1 Ultra Wide Input Range Remote On/Off Control No Minimum Requirement Six Sided Shielding Trim RoHS Compliant CSA Approved Model Number Voltage
HRS50 Series 50W isolated DC/DC converters
HRS50 Series 50W isolated DC/DC converters Features High Efficiency Wide operating temperature range ( -40 C to +85 C ) Wide 2:1 input range Standard half brick size Six side shield Input Output Isolated
single triple single single single dual single dual single single single triple single single single dual single dual single single
PRODUCTION SELECTION GUIDE Input Range # of Voltages Model Page Power Series AC-DC 90-130 Vac; 47-440 Hz Single phase, Three Phase (Delta or WYE) 50 watt triple 5, 5.2,, 15, 24, 28 (5, ±) (5,±15) AM, RM
POWERBOX Defense Line 1200 DBA Series 1200W AC/DC Conduction Cooled. Preliminary
Preliminary Description The DBA series, very compact and low profi le AC/DC power supply up to in chassis format, incorporates input filtering, input and output protections, very robust mechanical mounting
60 Watt Triple Output Half Brick DC/DC Converter
VKP60xT Corporate: Corporate: www.cdtechno.com www.cdtechno.com 60 Watt Triple Output Half Brick DC/DC Converter 18-40 & 33-75V Input Range Each Channel Independently Current Limited High Efficiency: 87%
TPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3
, Features High power density 40 W power supply (enclosed / open frame) 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition Ready to meet ErP directive, < 0.3
(typ.) (Range) Parameter Model Min. Typ. Max. Unit
FEATURES Smallest Encapsulated 20W! Package Size 1.0 x1.0 x0.4 Ultra-wide 4:1 Input Range Very high Efficiency up to % Operating Temp. Range - C to +85 C Output Voltage Trimmable I/O-isolation Voltage
CLP0224 Open Frame Power Supply Vac input; 24Vdc output; 200W Output Power
Applications Industrial equipment Telecommunications equipment Features Compact size 50.8 mm x 101.6 mm x 37.25 mm (2 in x 4 in x 1.47 in) with density of 18 W/in 3 Universal AC Input Range (90 264VAC)
Cool Power Technologies
Cool Power Technologies Sixteenth-Brick Isolated DC/DC Converter Features Industry-standard pinout Wide input voltage range: 36 75Vin Output: 3.3 V at 12 A, 40W max. No minimum load required Low height
Q54SJ W DC/DC Power Modules FEATURES. Q54SJ12058, 700W Quarter Brick DC/DC Power Modules: 40~60Vin, 12.2V/ 57.4A out OPTIONS APPLICATIONS
Q54SJ12058 700W DC/DC Power Modules FEATURES High efficiency: 96.4% @ 12.2V/57.4A out size : 57.9 x 36.8 x 12.0mm (2.28 x1.45 x0.47 ) (open frame) 57.9 x 36.8 x 13.4mm (2.28 x1.45 x0.53 ) (with base plate)
VXR D SERIES HIGH RELIABILITY COTS DC-DC CONVERTERS
VXR30-2800D SERIES HIGH RELIABILITY COTS DC-DC CONVERTERS Models Available Input: 9 V to 60 V continuous, 6 V to 100 V transient 30 W, dual outputs of 3.3 V, 5 V, 12 V, 15 V -55 C to 105 C Operation 1.0
QBW025A0B Series Power Modules; DC-DC Converters Vdc Input; 12Vdc Output; 25 A
Document No: PDF Name: 36-75 Vdc Input; 12Vdc Output; 25 A Applications Distributed power architectures Servers and storage applications Access and Optical Network Equipment Enterprise Networks Options
DATASHEET VXR S SERIES
VXR250-2800S SERIES HIGH RELIABILITY COTS DC-DC CONVERTERS DATASHEET Models Available Input: 11 V to 60 V continuous, 9 V to 80 V transient 250 W, single output of 3.3 V, 5 V, 12 V, 15 V, 28 V -55 C to
AcBel Product Specification
AcBel Product Specification Acbel Part No. Model Name Description DC9010-000G A2DM500W-28V AC-DC Converter 85~265Vac Input, 28Vdc Output, 500W Output Power, Revision Rev 3.5 Date Issued 18/07/2012 1 High
WAF S 12 W - N S DR Series Name Input Output Output Input Remote Control Load Share Assembly Voltage Quantity Voltage Range Option Option Option
Railway Automation Datacom IPC Industry Measurement Telecom Charger Automobile Boat Medical PV PART NUMBER STRUCTURE WAF300-48 S 12 W - N S DR Series Name Input Output Output Input Remote Control Load
AS SERIES (2.00 x 1.6 Package) Up to 20 Watt DC-DC Converter
PRODUCT OVERVIEW The AS series offer up to 20 watts of output power in standard 2.00 x 1.60 x 0.45 inches packages. This series features high efficiency and 1500 Volts of DC isolation. The AS series provides
PACSR V Output AC/DC Converter, Module Package
PACSR24012 24V Output AC/DC Converter, Module Package FEATURES Full Load Efficiency up to 92.5% @220VAC Metal Case Box Type Package Package Dimension: 110.8x50.8x13.7mm (4.36 x2.0 x0.54 ) Operating Baseplate
PRODUCT OVERVIEW. APPLICATIONS: Distributed Power Architectures Mobile telecommunication Industrial applications Battery operated equipment
FEATURES Industry Standard 24-Pin DIP package 15Watts Isolated Output 4:1 Input Range Regulated Outputs Up to 90 % Efficiency Low No Load Power Consumption -40 C to +85 C industrial temperature range Negative
VXR S SERIES 1.0 DESCRIPTION 1.1 FEATURES 1.2 COMPLIANCE 1.3 PACKAGING 1.4 SIMILAR PRODUCTS AND ACCESSORIES
VXR15-2800S SERIES HIGH RELIABILITY COTS DC-DC CONVERTERS Models Available Input: 9 V to 60 V continuous, 6 V to 100 V transient 15 W, single output of 3.3 V, 5 V, 12 V, 15 V -55 C to 105 C Operation 1.0
15 W DC/DC CONVERTERS. SERIES DESCRIPTION Page. PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation
15 W DC/DC CONVERTERS SERIES DESCRIPTION Page PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation PC15WR4 4:1 Input Range 6 2 x 1 Metal Can Package 2kv Isolation CTC TECHNOLOGY CO.,LTD. DC /
CLP0112 Open Frame Power Supply Vac input; 12Vdc output; 150W Output Power
Applications Telecommunications equipment Embedded Computing Storage Systems Industrial equipment Features Compact size 50.8 mm x 101.6 mm x 36.1 mm (2 in x 4 in x 1.4 in) with density of 13.4W/in 3 Universal
Negative voltage step, 25% to 75% load dynamic, 0.1A/us slew rate. Vin=110/220Vac, Io=10, peak to peak, 20MHz bandwidth
PACSR48010 48V Output AC/DC Converter FEATURES Full Load Efficiency up to 94% @220VAC Metal Case Box Type Package Package Dimension: 110.8x50.8x13.7mm (4.33 x2.00 x0.54 ) Operating Baseplate Temperature
NOT RECOMMENDED FOR NEW DESIGNS
28 Volt Input NOT RECOMMENDED FOR NEW DESIGNS Series Features -40 C to +85 C operation 18 to 36 VDC input Transient protection 50 V for 50 ms for 28 Vin models Fully isolated Fixed frequency switching
(DOSA) VDC, 5.5 A.
Features Industry-standard pinout Output: 15 V at 5.5 A, 82.5W max. No minimum load required Low height - 0.374 (9.5mm) max. Basic Insulation Withstands 100 V input transients Fixed-frequency operation
CLP0205 Open Frame Power Supply Vac input; 5Vdc output; 200W Output Power; 0.25A stdby
; 12Vout @ 0.25A stdby Applications Industrial equipment LED Signage Telecommunications equipment Description Features Compact size 50.8mm x 101.6mm x 36.1mm (2in x 4in x 1.4in) with density of 18W/in
MODEL SELECTION. Model Name Vin(Vdc) Vout(Vdc) Io(Amps) Watts SV SV * SV SV SV SV FEATURES
World's Most dvanced High Density DC-DC Converters. MODEL SELECTION Size: 60.70mm x 57.91mm x 13.30mm (2.39in. x 2.28in. x 2in.) Model Name Vin(Vdc) Vout(Vdc) Io(mps) Watts SV48-5-30-1 36-75 5 6 30 SV48-5-50-1
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
DPO-500 KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.6A
Technical Reference Notes AIT00ZPFC-01NL. AIT00ZPFC 150W AC-DC Converter Module
AIT00ZPFC 150W AC-DC Converter Module The Power Factor Correction module is part of Astec s family of advanced modular power supply components. Featuring high reliability and convenient control and monitoring
Delphi Series Q48SK, Quarter Brick Family DC/DC Power Modules: 36~75V in, 12V/18A out, 216W
FEATURES High efficiency : 94.7% @ 12V/18A Size: 57.9x36.8x11.2mm (2.28 x1.45 x0.44 ) (w/o heat spreader) 57.9*36.8*12.7mm(2.28 *1.45 0.50 ) (with heat spreader) Standard footprint Industry standard pin
16 to 40 Volt Input - 5 Watt
Features Radiation tolerant space dc-dc converter -- Single event effects (SEE) LET performance to 86 MeV cm 2 /mg -- Total ionizing dose (TID) guaranteed per MIL-STD-883 method 1019, radiation hardness
VP ELECTRONIQUE MASSY - Tel:
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise Small Size But Higher Wattage Screw Terminal
GFM DC-DC Converter. Preliminary 8 to 50 Volt Input 30 Watt High Efficiency. MIL-STD Pedigree. Exceptional Value. PRELIMINARY
Features High reliability Typical efficiency 90% or greater Up to 30 watts -55 C to +105 C operation Wide 8 to 50 volt input Inhibit and sync functions Assembled in a MIL-PRF-38534 certified facility GFM
DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output
THN 20WI Series Application Note DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless
DC Output Voltage range: 5 to 50VDC Current range: 0 to 40A Power range: 0 to 500W Peak power: Up to 750W for up to 4 seconds.
M7027 SERIES MINIATURE, SINGLE OUTPUT VERY HIGH DENSITY, DC / DC CONVERTERS Up to 500 W (750 W peak) Applications Military (Airborne, ground-fix, shipboard), Ruggedized, Telecom, Industrial Special Features
American Power Design, Inc.
, Inc. FEATURES 4 Customer Selects Output Voltage 4 Ultra Wide Input Ranges (936Vdc, 2060Vdc) 4 Efficiency 89% (typ.) 4 Independently Isolated Outputs 4 SixSided Shielded Case 4 Remote On/Off Control 4
Notes: Note1: Max. capacitive load is tested at nominal input voltage and full load. Single or Dual
Features Regulated Converters Description 6-Side Shielding External ON/OFF control 1.6kV Isolation UL/CSA/EN-695-1 Certified 2:1 Input Voltage Range Continuous Short Circuit Protection Efficiency up to
TBD. Delphi E36SR Series DC/DC Power Modules: 18~60 in, 12V/4A out, 48W FEATURES OPTIONS APPLICATIONS
FEATURES High efficiency: 91% @ 12V/4A Size: 58.4x22.8x8.73mm (2.30 x0.90 x0.34 ) Standard footprint Industry standard pin out TBD Fixed frequency operation Input UVLO, Output OCP, OVP, OTP 1500V isolation
H80SV12017 * * FEATURES. Delphi Series H80SV, half Brick Family DC/DC Power Modules: 16.8~137.5 Vin, 54/48/24/15/12Vout,200W APPLICATIONS
H80SV12017 200W DC/DC Power Modules Delphi Series H80SV, half Brick Family DC/DC Power Modules: 16.8~137.5 Vin, 54/48/24/15/12Vout,200W The H80SV series Half-Brick is isolated 200W DC/DC converters with
Low Profile. 3 Year Warranty
MCC Series 400 W Regulated Output Optional 200 W Non-regulated Conditioned Rail 1 to 4 Configurable Outputs MIL-STD-1275 and DEF-STAN 61-5 MIL-STD-461 and DEF-STAN 59-411 Low Profile Rugged Construction
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.4A without
uv MICROVERTER -164 DC/DC Converter
Astrodyne Corporation Tel: (08) 964-6300 3 Hampden Road Fx: (08) 339-037 Mansfield, MA 02048 sales@astrodyne.com MICROVERTER -164 DC/DC Converter 300 Input 300 Watts 3/4 Brick The MICROVERTER 164 Series
VMS-300A - XX - XXX - X
date 05/16/017 page 1 of 10 SERIES: VMS-A DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction remote
DC-DC Converter Module
Features DC input range: 27-56 V Input surge withstand: 105 V for 100 ms DC output: 13.4 V Programmable output: 10 to 110% Regulation: ±0.2% no load to full load Efficiency: 88.5% Maximum operating temperature:
FMCE-0328 EMI Input Filter
28 VOLT InPuT 3 AMP FEATuRES Attenuation to 60 db at 500 khz, typical Operating temperature -55 to +125 C Nominal 28 V input, -0.5 to 50 V operation Transient rating -0.5 to 80 V for 1 second Up to 3 A
VXR D SERIES 1.0 DESCRIPTION 1.1 FEATURES 1.2 COMPLIANCE 1.3 PACKAGING 1.4 SIMILAR PRODUCTS AND ACCESSORIES
VXR15-2800D SERIES HIGH RELIABILITY COTS DC-DC CONVERTERS Models Available Input: 9 V to 60 V continuous, 6 V to 100 V transient 15 W, dual outputs of 3.3 V, 5 V, 12 V, 15 V -55 C to 105 C Operation 1.0
28 Volt input 65 Watt
Features Radiation tolerant space DC-DC converter -- Single event effects (SEE) LET performance to MeV cm 2 /mg -- Total ionizing dose (TID) guaranteed per MIL-STD-3 method 1019, radiation hardness assurance