FED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly Option Voltage Quantity Voltage Range Option
|
|
- Bernadette McCormick
- 5 years ago
- Views:
Transcription
1 Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly Option Voltage Quantity Voltage Range Option () () 24: 9~36 S: Single 1P5: 1.5 4:1 : Positive logic : None 48: 18~75 2P5: 2.5 N: Negative logic HC: Heat-sink with Clamp 3P3: : 5 5P1: : 12 15: 15 D: Dual 05: ±5 12: ±12 15: ± Page 1
2 TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 unless otherwise noted Model Number Input Range Output Voltage Output Load Input No Load Efficiency Maximum Capacitor Load A ma % μf FED30-24S1P5W 9 ~ FED30-24S2P5W 9 ~ FED30-24S3P3W 9 ~ FED30-24S05W 9 ~ FED30-24S5P1W 9 ~ FED30-24S12W 9 ~ FED30-24S15W 9 ~ FED30-24D05W 9 ~ 36 ±5 ± ±3000 FED30-24D12W 9 ~ 36 ±12 ± ±2000 FED30-24D15W 9 ~ 36 ±15 ± ±1300 FED30-48S1P5W 18 ~ FED30-48S2P5W 18 ~ FED30-48S3P3W 18 ~ FED30-48S05W 18 ~ FED30-48S5P1W 18 ~ FED30-48S12W 18 ~ FED30-48S15W 18 ~ FED30-48D05W 18 ~ 75 ±5 ± ±3000 FED30-48D12W 18 ~ 75 ±12 ± ±2000 FED30-48D15W 18 ~ 75 ±15 ± ±1300 INPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating input voltage range 24Vin(nom) Vin(nom) Start up voltage 24Vin(nom) 9 48Vin(nom) 18 Shutdown voltage 24Vin(nom) Vin(nom) Start up time Constant resistive load Power up 30 Remote ON/OFF 30 ms Input surge voltage 100 ms, max. 24Vin(nom) 50 48Vin(nom) 100 Input filter Pi type Remote ON/OFF Referred to Vin pin Positive logic DC-DC ON Open or 3 ~ 12 (Standard) DC-DC OFF Short or 0 ~ 1.2 Negative logic (Option) DC-DC ON DC-DC OFF Short or 0 ~ 1.2 Open or 3 ~ 12 Input current of Ctrl pin ma Remote off input current 3.0 ma Page 2
3 OUTPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Voltage accuracy % Line regulation Low Line to High Line at Full Load Others Dual 5Vout % Load regulation No Load to Full Load Single Dual % Cross regulation Asymmetrical load 25%/100% FL Dual % Voltage adjustability Single output % Ripple and noise 20MHz bandwidth Others 100 With a 1μF/50V MLCC 12Vout, 15Vout 150 mvp-p Temperature coefficient %/ Transient response recovery time 25% load step change 250 μs Over voltage protection Zener diode clamp 1.5Vout 2.5Vout Vout 3.9 5Vout, 5.1Vout Vout 15Vout Over load protection % of Iout rated 150 % Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Isolation voltage 1 minute Input to Output Input (Output) to Case Case grounding Connect case to Vin with decoupling Y Cap Isolation resistance GΩ Isolation capacitance 1500 pf Switching frequency khz Safety approvals IEC /UL/ EN UL:E CB:UL(Demko) Case material Nickel-coated copper Base material FR4 PCB Potting material Epoxy (UL94 V-0) Weight 30.5g (1.07oz) MTBF MIL-HDBK-217F, Full load x 10 6 hrs ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating ambient temperature Without derating With derating Maximum case temperature +105 Over temperature protection 115 Storage temperature range Thermal impedance Without heat-sink 12 With heat-sink 10 /W Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH Page 3
4 EMC SPECIFICATIONS Parameter Conditions Level EMI EN55032 With external components Class A ESD EN Air ± 8kV and Contact ± 6kV Perf. Criteria A Radiated immunity EN V/m Perf. Criteria A Fast transient EN ±2kV Perf. Criteria A 24 input With an external input filter capacitor (Nippon chemi-con KY series, 330μF/50V) Surge 48 input EN With an external input filter capacitor (Nippon chemi-con KY series, 220μF/100V) ±1kV Perf. Criteria A 24 input With an external input filter capacitor (Nippon chemi-con KY series, 330μF/50V) 48 input With an external input filter capacitor (Nippon chemi-con KY series, 220μF/100V) Conducted immunity EN Vr.m.s Perf. Criteria A Power frequency magnetic field EN A/m continuous; 1000A/m 1 second Perf. Criteria A CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE FED30-48S05W Derating Curve FED30-48S05W Derating Curve With Heat-sink FED30-48S05W Efficiency vs. Input Voltage FED30-48S05W Efficiency vs. Output Load Page 4
5 FUSE CONSIDERATION This power module is not internally fused. An input line fuse must always be used. This encapsulated power module can be used in a wide variety of applications, ranging from simple stand-alone operation to an integrated part of sophisticated power architecture. To maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input line fuse. The input line fuse suggest as below: Model Fuse Rating (A) Fuse Type FED30-24S W FED30-24D W 6.3 Slow-Blow FED30-48S W FED30-48D W 3.15 Slow-Blow The table based on the information provided in this data sheet on inrush energy and maximum DC input current at low Vin. MECHANICAL DRAWING PIN CONNECTION PIN SINGLE DUAL 1 +Vin +Vin 2 -Vin -Vin 3 Ctrl Ctrl 4 +Vout +Vout 5 -Vout Common 6 Trim -Vout 1. All dimensions in inch [mm] 2. Tolerance :x.xx±0.02 [x.x±0.5] x.xxx±0.01 [x.xx±0.25] 3. Pin pitch tolerance ±0.01 [0.25] 4. Pin dimension tolerance ±0.004[0.10] HEAT-SINK OPTIONS -HC (Heat-sink with clamps) * All dimensions in inch [mm] Page 5
6 RECOMMENDED PAD LAYOUT Standard -HC All dimensions in inch[mm] Pad size(lead free recommended) Through hole : Φ0.051[1.30] Top view pad : Φ0.064[1.63] Bottom view pad : Φ0.102[2.60] THERMAL CONSIDERATIONS The power module operates in a variety of thermal environments. However, sufficient cooling should be provided to help ensure reliable operation of the unit. Heat is removed by conduction, convection, and radiation to the surrounding Environment. Proper cooling can be verified by measuring the point as the figure below. The temperature at this location should not exceed Maximum case temperature. When Operating, adequate cooling must be provided to maintain the test point temperature at or below Maximum case temperature. You can limit this Temperature to a lower value for extremely high reliability. Thermal test condition with vertical direction by natural convection (20LFM). TOP VIEW Page 6
7 OUTPUT VOLTAGE ADJUSTMENT Output voltage set point adjustment allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external resistor between the Trim pin and either the +Vout or -Vout pins. With an external resistor between the Trim and -Vout, the output voltage set point increases. With an external resistor between the Trim and +Vout, the output voltage set point decreases. The external Trim resistor needs to be at least 1/16W of rated power. EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. Trim-up S1P5W Vout (V) RU (kω) S2P5W Vout (V) RU (kω) S3P3W Vout (V) RU (kω) S05W Vout (V) RU (kω) S5P1W Vout (V) RU (kω) S12W Vout (V) RU (kω) S15W Vout (V) RU (kω) Page 7
8 OUTPUT VOLTAGE ADJUSTMENT(CONTINUED) Trim-down S1P5W Vout (V) RD (kω) S2P5W Vout (V) RD (kω) S3P3W Vout (V) RD (kω) S05W Vout (V) RD (kω) S5P1W Vout (V) RD (kω) S12W Vout (V) RD (kω) S15W Vout (V) RD (kω) Tel Fax Web Add No. 36, 22 nd Rd., Taichung Industrial Park, Taichung, Taiwan, R.O.C Page 8
FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option
More informationWAF S 12 W - N S DR Series Name Input Output Output Input Remote Control Load Share Assembly Voltage Quantity Voltage Range Option Option Option
Railway Automation Datacom IPC Industry Measurement Telecom Charger Automobile Boat Medical PV PART NUMBER STRUCTURE WAF300-48 S 12 W - N S DR Series Name Input Output Output Input Remote Control Load
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 30 U S 12 B - Application Package Dimension Output Input Output Output Protection
More informationOutput Full Load
SERIES DC-DC CONVERTER 2:1 & 4:1 WIDE INPUT RANGE UP TO 3.3 WATTS FEATURES REINFORCED INSULATION FOR 2VAC WORKING VOLTAGE CLEARANCE AND CREEPAGE DISTANCE :8.0mm/2MOPP 00VAC INPUT TO OUTPUT 2MOPP ISOLATION
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M S D 30 U S 12 B - T Application Package Dimension Output Input Output Output Protection
More informationWAF300_ EH-0817 PART NUMBER STRUCTURE 24:24 28:28 48:48
PART NUMBER STRUCTURE WAF0-48 Series Name Input Voltage () 48:18~75 110:43~160 S Output Quantity Output Voltage () S:Single : 15:15 24:24 28:28 48:48 W Input Range 4:1 N S Remote Control Option Load Share
More informationDC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output
THN 20WI Series Application Note DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless
More informationNote1: Measured at nominal input voltage and full load Note2: Measured at minimum input voltage and constant resistive load
Features Regulated Converters Description :1 wide input voltage range 1.kV isolation UL certified Efficiency up to 88% Fixed operating frequency Six-Sided continuous shield No minimum load required The
More informationhttp://www.mmtmachrone.com 96D SERIES FEATURES: 30W DIL PACKAGE Recognized By UL 60950-1 2:1 WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY UL 94V-0 PACKAGE MATERIAL CUSTOMIZED SOLUTIONS AVAILABLE RoHS
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1. Automation Datacom IPC. Industry Measurement Telecom
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE TAD 65 U B - xx yy - Series Name Output Input Output Output Output Output Output Protection
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 40 U S 12 B - Application Package Dimension Output Input Output Output Protection
More informationM A D 65 U S 12 B - PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 65 U S 12 B - Application Package Dimension Output Input Output Output Protection
More informationPXD30-xxWS-xx-Single Output DC/DC Converters
PXD30-xxWS-xx-Single Output DC/DC Converters 9 to 36 Vdc and 18 to 75 Vdc input, 1.5 to 15 Vdc Single Output, 30W Applications Wireless Network Telecom / Datacom Industry Control System Measurement Semiconductor
More informationQAE100W SERIES QUARTER-BRICK DC-DC CONVERTER
SERIES QUARTER-BRICK DC-DC CONVERTER 4:1 ULTRA WIDE INPUT RANGE UP TO 90Watts FEATURES NO MINIMUM LOAD REQUIRED LOW STANDBY POWER CONSUMPTION SOFT-START 2250 INPUT TO OUTPUT BASIC INSULATION SAFETY MEETS
More informationPXD10-Single Output DC/DC Converter
PXD10-Single Output DC/DC Converter 9 to 18 Vdc, 18 to 36 Vdc and 36 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 10W Features Single output current up to 2A 10 watts maximum output power 2:1 wide input
More informationNotes: Note1: Max. capacitive load is tested at nominal input voltage and full load. Single or Dual
Features Regulated Converters Description 6-Side Shielding External ON/OFF control 1.6kV Isolation UL/CSA/EN-695-1 Certified 2:1 Input Voltage Range Continuous Short Circuit Protection Efficiency up to
More information9 to 36 Vdc and 18 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 40W. Features
PXF40xxWSxx Single Output DC/DC Converter 9 to 36 Vdc and 18 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 40W Features Single output current up to 10A 40 watts maximum output power 4:1 ultra wide input
More informationEfficiency (typ.) (Range) Load. Output Current Input Current Reflected Ripple
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Ultra Wide 4:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for 2VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout 4:
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for VAC working voltage Clearance and creepage distance >8.mm kvac I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout 4:
More informationRipple & Max. capacitive Output Current
0 Watts xxx Series Wide 4: Input Range Single Output Industry Standard /4 Brick -40 C to +0 C Operation 0 VDC Isolation Output Trim ±0% Remote On/Off Year Warranty Dimensions: QSC0:. x.4 x 0. (.9 x. x.
More informationMI2000ERW. Series. Miniature 1 x 1 20W, Ultra-Wide 2:1 Input DC/DC Con vert ers. Key Features:
MI2000ERW Miniature 1 x 1 20W, Ultra-Wide 2:1 Input DC/DC Con vert ers Key Features: 20W Output Power 2:1 Input Voltage Range Miniature 1 x 1 Case 1,500 VDC Isolation Meets CISPR 32/EN 55032 High Efficiency
More informationMI2500RU. Series. Compact, 1 x 1 Inch 25W, 4:1 Input Range DC/DC Con vert ers. Key Features: Electrical Specifications
MI2500RU Compact, 1 x 1 Inch 25W, 4:1 Input Range DC/DC Con vert ers Electrical Specifications Key Features: 25W Output Power 4:1 Input Voltage Range Compact 1 x 1 Inch Case 1,500 VDC Isolation 12 Standard
More informationFeatures. Regulated Converter. REM6 6 Watt 2:1 & 4:1 DIP24 Single and Dual. Output. DC/DC Converter
Features Regulated Converter Reinforced insulation for 250VAC working voltage Clearance and creepage distance: 8mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
More informationDN03S/D Series DC/DC CONVERTER 2-3W, DIP-Package
DN03S/D Series DC/DC CONVERTER 2-3W, DIP-Package FEATURES DIP-24 Plastic Package Wide 2:1 Input Range Operating Temp.Range -40 to +85 C Overload Protection No Minimum Load Requirement Isolation voltage
More informationESB Series Embedded EMC Filter Up to 40W converter
Features High Ffficiency up to 91% 2:1 / 4:1 Ultra-Wide input range Compact size 1.6 x 1.0 x 0.4 & 1.6 x 1.0 x 0.5 Standard DOSA pin out; Fully replaceable with 2 x1 standard case Metal Case Six-Sided
More informationFeatures. Regulated Converter. REM10 10 Watt. 2:1 & 4:1 DIP24 Single and Dual Output REM10- / DC/DC Converter
Features Regulated Converter Description Reinforced insulation for 250VAC working voltage Clearance and creepage distance: 8mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard
More informationPinning (3) 4:1 Input Single or Dual. Notes: Note3: /X2 is without ON/OFF CTRL and without Output Voltage Trimming
Features Regulated Converters 4:1 wide input voltage range Compact size 1 x1 package Efficiency up to % Wide operating temperature from - C to +75 C without derating Continuous short circuit protection
More informationMAD40 MULTI -OUTPUT SERIES OPP SCP OVP. 2 X 3.5 Inch AC-DC POWER SUPPLIES. UNIVERSAL INPUT RANGE UP TO 40Watts PART NUMBER STRUCTURE LOW CROSS REG.
MAD40 MULTI -OUTPUT SERIES 2 X 3.5 Inch AC-DC POWER SUPPLIES UNIVERSAL INPUT RANGE UP TO 40Watts FEATURES 0.15 WATT LOW STANDBY POWER CONSUMPTION ULTRA LOW CROSS REGULATION UNDER 1.5 WIDE INPUT VOLTAGE
More informationC B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
More informationFeatures. Regulated Converters. RS6 6 Watt. SIP8 Single and Dual Output. DC/DC Converter. Description. Selection Guide
Features Regulated Converters Description Highest Power Density In SIP Package 1.6kVDC/1 Minute Isolation Efficiency Up To 88% -4 C To +75 C Operating Temperature Range @ Full Load EN695 And UL/EN62368-1
More informationMLSR100 Series. High Efficiency, 1.0A Surface Mount, POL Switching Regulators. Key Features:
MLSR100 Series High Efficiency, 1.0A Surface Mount, POL Switching Regulators Electrical Specifications Specifi cations typical @ +25 C, nominal input voltage & rated output current, unless otherwise noted.
More information(typ.) (Range) Parameter Model Min. Typ. Max. Unit
FEATURES Smallest Encapsulated 20W! Package Size 1.0 x1.0 x0.4 Ultra-wide 4:1 Input Range Very high Efficiency up to % Operating Temp. Range - C to +85 C Output Voltage Trimmable I/O-isolation Voltage
More informationMTC Series 15 W AC/DC Switching Power Supply Module Medical
Switching Power Modules for PCB Mounting Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise & High Efficiency Isolation class II UL60601-1 / IEC60601-1
More informationVP ELECTRONIQUE MASSY - Tel:
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise Small Size But Higher Wattage Screw Terminal
More informationRPP20-W. Features ICE Technology* POWERLINE+ 20 Watt 4:1 Single & Dual Output. DC/DC-Converter with 3 year Warranty
Features ICE Technology* Description 115 C Maximum Case Temperature -40 C Minimum Temp. UL Certified Built-in FCC/EN55022 Class B Filter 4:1 Wide Input Voltage Range Six Sided Shielded Enclosure Ribbed
More informationCV SERIES. 1.8 to 45 Watts VDC, VDC, 10-30VDC Input Ranges Adjustable Output Voltage Non-Isolated DC/DC Converters
DATASHEET CV SERIES 2.-.VDC, 4.-4VDC, 0-30VDC Input Ranges FEATURES Output Current up to 3A Output Power Range 2.-.VDC, 4.-4VDC, and 0-30VDC Input Voltage Ranges High Efficiency - 9% at 2VDC and Full Load
More information15 W DC/DC CONVERTERS. SERIES DESCRIPTION Page. PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation
15 W DC/DC CONVERTERS SERIES DESCRIPTION Page PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation PC15WR4 4:1 Input Range 6 2 x 1 Metal Can Package 2kv Isolation CTC TECHNOLOGY CO.,LTD. DC /
More informationEfficiency (typ.) (Range) Load VDC VDC ma ma(typ.) ma(typ.) μf % MCWI05-12S
FEATURES Smallest Encapsulated 5W Ultracompact SIP8 Package Ultrawide 4 : 1 Input Voltage Range Fully Regulated Output Voltage I/O Isolation 1500 VDC Operating Ambient Temp. Range40 to 75 No Min. Requirement
More informationMXD40Multi_ EH-0218 PART NUMBER STRUCTURE. Vo3 (Triple only) 9: 24V. y: refer to Suffix yy. P-DUKE Technology Co., Ltd.
MXDMulti_0-02-2-02-EH-0218 Medical utomation Datacom IPC Industry Measurement Telecom utomobile Boat Charger PV Railway PRT NUMBER STRUCTURE MD U Name Power (W) Input (VC) Quantity 1 () Vo1 D:Dual 3: 5V
More informationSeries AM50E-NZ 50 Watt DC-DC Converter
FEATURES: Wide Input range 2:1 Input to Output Isolation of 1500 High Efficiency up to 93% Input Over Voltage and Under Voltage Lockout Remote On/Off Control Output OVP, OCP & SCP Trim Adjustment Operating
More informationSTB Series 2:1 & 4:1 Vin range / up to 60W 1/16 Brick
2:1 & 4:1 Vin range / up to W 1/16 Brick Features Industry-Standard DOSA pin out 4:1 / 2:1 Ultra-Wide input range High Ffficiency 91%@ 5V (SR topology) Compact size 1.49 x 1.46 x.5 Metal Case Six-Sided
More informationhttp://www.mmtmachrone.com 93D SERIES FEATURES: 60W DIL PACKAGE INDUSTRY STANDARD PACKAGE 2:1 WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY UL94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS COMPLIANT
More informationFeatures. Switching Regulator. 0.5 Amp SIP3 Single Output R R DC/DC Converter
Features Switching Regulator Description Efficiency up to 97%, no need for heatsinks Pin-out compatible with LM78XX linears Very low profile 4.75V - 32V Wide input range Short circuit protection, thermal
More informationFeatures. Regulated Converter. RAC02-SE/277 2 Watt Single Output RAC02- SE/277. AC/DC Converter
Features Regulated Converter Description 5mW max. no load power consumption Efficiency up to 76% Isolated output kvac / min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationTPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3
, Features High power density 40 W power supply (enclosed / open frame) 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition Ready to meet ErP directive, < 0.3
More information500 ma DC-DC Step Down Converter P78G-Series
500 ma DC-DC Step Down Converter -Series Pin compatible to linear 78xx regulator (TO-220) Not isolated Efficiency up to 95 % Input voltage range up to 6 V Positive or negative output voltage possible Operating
More informationHigh power density 3W Converter in SIP7 case. 3kVDC and 4kVDC Isolation Options
Features Unregulated Converters Description High power density 3W Converter in SIP7 case 3kVDC and 4kVDC Isolation Options Efficiency to 9% Certified to IEC/EN62368 The series of 3W high isolation DC/DC
More informationRPP30. Features ICE Technology* POWERLINE+ 30 Watt 2:1 Single & Dual Output. DC/DC-Converter with 3 year Warranty
Features ICE Technology* Description 115 C Maximum Case Temperature -40 C MinimumTemp. Built-in FCC/EN55022 Class B Filter 2:1 Wide Input Voltage Range Six Sided Shielded Enclosure Ribbed or Baseplate
More informationNote1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage.
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Built-in EMC Filter, EN-522 Class B The RPP20 series
More informationNote1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load
Features Regulated Converter Description 4mW max. no load power consumption High efficiency up to 76% Isolated output 3kVAC / 1 min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationAll specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.4A without
More informationS24SP series 60W Single Output DC/DC Converter
Model List Model Number Input Voltage (Range) Output Voltage Output Current Input Current (typ input voltage) Load Regulation Maxcapacitive Load (Cap ESR>=1mohm;Full Efficiency (typ.) load;5%overshoot
More informationFeatures. Regulated Converter. RAC02-SE/277/W 2 Watt Single Output. RAC02- SE/277/W Wired. AC/DC Converter
Features Regulated Converter Description 35mW max. no load power consumption Efficiency up to 76% Isolated output 3kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationPM24S/DR24S series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 92% Wide input range, 9V-36V Package Dimension: Panel Mount: 100.0*56.0*19.0mm (3.94 * 2.20 *0.75 ) Din Rail: 118.6*67.1*23.5mm (4.67 *2.64 *0.93 ) Over voltage protection, hiccup
More informationSeries AM20EW-Z 20 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model FEATURES: Input Voltage RoHS Compliant Soft start Ultra wide 4:1 Input range Industrial temperature range -40 to +85 C Adjustable
More informationSwitching Regulator. LMT78_1.0R Series Wide input, non-isolated & regulated, single output, SMD package
Efficiency up to 95 No need for heat sinks 1.0AMP SMD package Wide input voltage range (4.75V - 36V) Adjustable output voltage Remote ON/OFF control Short circuit protection (SCP), thermal shutdown Very
More informationFeatures. Switching Regulator. 2.0 Amp SIP3 Single Output R-78B-2.0 R-78B DC/DC Converter
Features Switching Regulator Description Efficiency up to 96%, no need for heatsinks 2A continuous output current Vin up to 32V Vout: 1.2V - 15V Wide operating temperature - C to +7 C at full load Continuous
More informationISOLATED DC-DC CONVERTER EC4SBW SERIES APPLICATION NOTE
ISOLATED DC-DC CONVERTER EC4SBW SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Written By Enoch Danny Eunice Research and Development Department Jacky David Benny Quality Assurance
More informationFor more information, please visit the product page. input voltage 1 range. output voltage
date 9/12/218 page 1 of 1 SERIES: V78E--SMT DESCRIPTION: NON-ISOLATED DC SWITCHING REGULATOR FEATURES 1 A of output current efficiency up to SMT package industrial operating temp -~+ C designed to meet
More informationNote1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage.
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Built-in EMC Filter, EN-522 Class B The RPP20 series
More informationSeries AM30EW-Z 30 Watt DC-DC Converter
EATURES: Models Single output Model Input Voltage Ultra Wide 4:1 input range Remote on/off control Efficiency up to 91% Input/ Isolation 1600VDC Soft start Operating temperature -40ºC to + 75ºC Continuous
More information25 Watt QMZ Single and Dual Series
Single and Dual Series Efficiency up to % 10 VDC Isolation 4:1 Ultra Wide Input Range Remote On/Off Control No Minimum Requirement Six Sided Shielding Trim RoHS Compliant CSA Approved Model Number Voltage
More informationFeatures. Regulated Converter. RAC04-C/277 4 Watt Single and Dual Output RAC04- C/277 -_. AC/DC Converter
Features Regulated Converter Description mw max. no load power consumption High efficiency up to 79% Isolated Output 3.75kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +
More informationPRODUCT OVERVIEW. APPLICATIONS: Distributed Power Architectures Mobile telecommunication Industrial applications Battery operated equipment
FEATURES Industry Standard 24-Pin DIP package 15Watts Isolated Output 4:1 Input Range Regulated Outputs Up to 90 % Efficiency Low No Load Power Consumption -40 C to +85 C industrial temperature range Negative
More informationBothhand USA. Features. Isolated DC-DC Converters BOB5W Series -- 5 Watt
Features Wide 4 : 1 Input Voltage Range(9~36V,18~75V) Remote On/Off Input / Output Isolation Voltage: 1.5K VDC Extended Operating Temperature Range: -40 C to +85 C Output Short Circuit Protection: Continuous
More informationAS SERIES (2.00 x 1.6 Package) Up to 20 Watt DC-DC Converter
PRODUCT OVERVIEW The AS series offer up to 20 watts of output power in standard 2.00 x 1.60 x 0.45 inches packages. This series features high efficiency and 1500 Volts of DC isolation. The AS series provides
More informationDSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
More informationAA SERIES (1 x 1 Package) Up to 30 Watt DC-DC Converter
FEATURES Industry standard footprint (1 inch X 1 inch) Regulated Outputs, Fixed Switching Frequency Up to 90 Efficiency Low No Load Power Consumption Designed for use without tantalum capacitors -40 C
More informationPM24S/PM24D series 30W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 88% Wide input range, 9V-36V Package Dimension: Panel Mount: 100.0*56.0*19.0mm (3.94 * 2.20 *0.75 ) Din Rail: 118.6*67.1*23.5mm (4.67 *2.64 *0.93 ) Over voltage protection, hiccup
More informationSeries AM30EW-Z 30 Watt DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Input Voltage Ultra Wide :1 input range Remote on/off control Efficiency up to 91% Input/ Isolation 100VDC Soft
More informationS24SP12004 series 40W Single Output DC/DC Converter
FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink 5.8 x25.4 x17.5mm (2.
More informationDC/DC Converter URB_J(M)D/T-15W Series
15W isolated DC-DC converter in DIP/SMD package, Ultra-wide input & regulated single output FEATURES Ultra-wide 4:1 input voltage range High efficiency up to 89% No-load power consumption as low as 0.36W
More informationS24SP05012 series 60W Single Output DC/DC Converter
Model List Model Number S24SP05012 Input Voltage (Range) Output Voltage Output Current Input Current (typ input voltage) Load Regulation Maxcapacitive Load (Cap ESR>=10mohm;Full Efficiency load;5%overshoot
More informationPackaging. nom. Output Voltage
Features Unregulated Converters 1W Power in SMD package Pin compatible with R1S series -40 C to +100 C operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
More informationS24SP24003 series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 93% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink 5.8 x25.4 x17.5mm (2. x1.
More informationSeries AMSRL1-78JZ Up to 12 Watt DC-DC Switching Regulator
Click on Series name for product info on aimtec.com FEATURES: Picture Coming Soon Models Single output Model Input Voltage (V) Switching Regulator SMD Package Low Quiescent Current Efficiency Up To 95%
More informationMLSR7805. Series. Miniature Surface Mount Low Cost, 0.5A POL Switching Regulators.
. 7/18 MLSR7805 Miniature Surface Mount Low Cost, 0.5A POL Switching Regulators Key Features: Efficiency to 95% 0.5A Output Current Meets EN 62368 Miniature SMT Case Short Circuit Protected 0.2 ma No-Load
More informationATA 8W Series. Product Descriptions. 8 Watts DC/DC Converter
8 Watts DC/DC Converter Page 1 Total Power: 8 Watts Input Voltage: 9 to 36Vdc 18 to 75Vdc # of Outputs: Single, dual Special Features Smallest Encapsulated 8W Converter Industrial Standard DIP16 Package
More informationS24SE/S24DE series 30W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 89% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current
More informationFor more information, please visit the product page If your application requires forced air, view our Dc Fans. output. output current max (ma)
date 12/08/2017 page 1 of 10 SERIES: PBO-1 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 1 W continuous power ultra-compact SIP package available in straight-pin and bent-pin configurations wide input
More informationDC/DC Converter K78_T-500R3 Series
Wide input voltage Non-isolated and Regulated Single Output RoHS FEATURES High efficiency up to 95% No-load input current as low as 0.2mA Operating ambient temperature range -40 to +85 Output short-circuit
More informationERM 20W Series. Product Descriptions. 20 Watts DC/DC Converter
20 Watts DC/DC Converter Page 1 Total Power: 20 Watts Input Voltage: 9 to 36 18 to 75 40 to 160 # of Outputs: Single, Dual Special Features Industrial Standard 2 1 Package Ultrawide 4:1 Input Voltage Range
More informationAll specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
DPO-500 KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.6A
More informationFeatures. Switching Regulator. 0.5 Amp SIP3 Single Output R-78HB-0.5(L) DC/DC Converter
Features Switching Regulator Description Efficiency up to 96%, no heatsinks required Pin-out compatible with LM78XX linears Low profile (L/W/H=.5 x 8.5 x 7.5mm) High input voltage range, up to 7V Short
More informationDC/DC Converter K78xx-500R2 Series
Converter K78xx-5R Series Wide input voltage, non-isolated & regulated single output Patent Protection RoHS FEATURES Efficiency up to 96% Operating temperature range: -4 to + Low ripple & noise Supporting
More informationDSR120 Series. xxx Series. 120 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
120 Watts xxx Series Ultra Slim Design - 32 mm 150% Peak Load for 3 seconds Ambient Operation from -25 C to +70 C Full Load at 60 C (24V/48V) High Efficiency - Up to 92% Volt-Free Contact for OK Selectable
More informationFeatures. Switching Regulator. 0.5 Amp SIP3 Single Output R-78HB-0.5(L) R-78HB - /L. DC/DC Converter
Features Switching Regulator Description Efficiency up tpo 96%, no heatsinks required Pin-out compatible with LM78XX linears Low profile (L/W/H=.5 x 8.5 x 7.5mm) High input voltage range, up to 7V Short
More informationOutput Current Max (ma) Isolation (VDC)
Models Single output Model Input FEATURES: RoHS Compliant Operating Temperature - C to + 85 C High Efficiency up to 84% Continuous Short Circuit Protection Remote On / Off Control Wide 2:1 Input Range
More informationFeatures. Regulated Converter. 5 Watt DIP24 Single Output. Rxx-B R - B. DC/DC Converter
Features Regulated Converter High output voltage DIP24 converter Adjustable output voltage up to VDC Cascadable for output voltages up to VDC 3kVDC input/output isolation Remote voltage programming by
More informationS24SE/S24DE series 15W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 89% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current
More informationNLP40 SERIES 50 Watt Open Frame Power Supply Measures: 4.25 x 2.50 x 1.15
Total Power: 40-50 W Input Voltage: 90-264 VAC 120-370 VDC # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package (1U applications) Universal input Overvoltage and short circuit
More informationFeatures. Regulated Converters. RAC05-K 5 Watt 1 x 1 Single Output RAC05- SK. AC/DC Converter
Features Regulated Converters 5W Class II Power Supply in Compact 1 x 1 Package (High Power Density) Internal EMC Class B Filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical Protection
More informationFCW SERIES 15W WIDE INPUT RANGE
FCW SERIES 15W WIDE RANGE FEATURES 15W DIL PACKAGE INDUSTRY STANDARD PACKAGE 9-18V,18-36V,36-72V,9-36V,18-72V WIDE RANGE REGULATED 100% BURN IN UL 94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS
More informationVOF XX - XXX - X
date 01/31/018 page 1 of 10 SERIES: VOF-300 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 300W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction
More informationAA SERIES (1 x 1 Package) Up to 10 Watt DC-DC Converter
FEATURES Industry standard footprint (1 inch X 1 inch) Regulated Outputs, Fixed Switching Frequency Up to 87 % Efficiency Low No Load Power Consumption Designed for use without tantalum capacitors -40
More informationFeatures. Unregulated Converters. 1 Watt SIP6 Micro Size, Single and Dual Output RBM. RBM- / Protection (3) Single or Dual.
Features Unregulated Converters Micro size SIP 6 package Industry standard pinout Power sharing on dual output version 3kVDC/1s basic isolation Optional continuous short circuit protection Efficiency up
More informationFeatures. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter
Features Regulated Converters Description Compact low profile AC-DC power supply mw no load power consumption Class II power supply with kvac isolation Universal input voltage range (~VAC) Low output ripple/noise
More informationOVP 2:1. Wide Range. Protection
10W, Wide Input Range DIP, Single & Dual Output DC/DC s Key Features High Efficiency up to 88 10 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range CSA9-1 Safety Approval Complies with EN522 Class A
More informationOrdercode Output Power Output 1 Output 2 Output 3 PCB-mounting Chassis mounting max. with solder pins with screw terminals
Features PCB Mounting with Solder Pins or Chassis Mounting with Screw Terminals Single, Dual and Triple Output Models Universal Input 8-2 VAC, 0 0 Hz EMI meets EN 022, Class B and FCC, Level B Low Ripple
More information