Issue B. Bipolar, Latching, and Unipolar Hall-effect Digital Position Sensor ICs: SS400 Series, SS500 Series

Transcription

1 ,, and Hall-effect Digital Position s:, SS Series Issue B Datasheet FEATUES Quad Hall design minimizes mechanical stress effects Temperature-compensated magnetics help provide stable operation over a wide temperature range of -4 C to 1 C [-4 F to 2 F] Broad, inclusive supply voltage capability from 3.8 Vdc to Vdc for application flexibility Digital, open collector sinking output for easy interfacing with a variety of common electronic circuits High sensitivity versions available for potential applications requiring high accuracy or wide gaps, latching or unipolar magnetics DESCIPTION The and SS Series are small and versatile digital Hall-effect devices that are operated by the magnetic field from a permanent magnet or an electromagnet, and are designed to respond to alternating North and South poles, or to a South pole only. They are available in bipolar, latching or unipolar magnetics. On-board regulation provides stable operation over a 3.8 Vdc to Vdc supply voltage range. These sensors are capable of continuous ma sinking output and may be cycled as high as ma max. The 3.8 V capability allows for use in many potential low voltage applications. The digital, open collector sinking-type output is easily interfaced with a wide variety of electronic circuits. To provide reliable products and consistent quality, the products are tested at both 2 C [7 F] and 12 C [27 F]. All catalog listings are qualified for operation up to 1 C [2 F]. For design flexibility, these product are available in the following package styles: : Flat TO-92-style: - SS4XX: Straight standard leads, bulk pack - SS4XX-L: Straight long leads, bulk pack - SS4XX-T2: Formed leads, ammopack tape-in-box - SS4XX-T3: Straight standard leads, ammopack tape-in-box - SS4XX-S: Surface mount, bulk pack - SS4XX-SP: Surface mount, pocket tape and reel SS Series: SOT-89B, pocket tape and reel POTENTIAL APPLATIO Industrial: Speed and PM (revolutions per minute) sensing, tachometer, counter pickup, flow-rate sensing, brushless dc (direct current) motor commutation, motor and fan control, robotics control Transportation: Speed and PM (revolutions per minute) sensing, tachometer, counter pickup, motor and fan control, electric window lift, convertible roof position Medical: Motor assemblies, medication dispensing control POTFOLIO Other bipolar, latching and unipolar Halleffect digital sensor s include: SS36NT, SS36ST, SS36ST-1K, SS46S, SS46S-T2 VF36NT, VF36ST, VF46S SS361T, SS461 SS361CT, SS461C SS34T, SS44 Series SS36PT, SS46P, SS46P-T2 SS311PT, SS411P Sensing and Productivity Solutions

2 ,, or Hall-effect Digital s:, SS Series Table 1. Performance Specifications (Applies to both SS4 series and Series, unless otherwise noted.) Characteristic Condition Min. Typ. Max. Unit Supply voltage (V s) Vdc ated sinking current (I sink) ma Current consumption: on: SS Series off: SS Series V s = Vdc, I sink = ma, -4 C < T < 1 C, B > operate max. V s = Vdc, -4 C < T < 1 C, B > operate max. V s = Vdc, I sink = ma, -4 C < T < 1 C, B > operate max. V s = Vdc, I sink = ma, -4 C < T < 1 C, B > release min ma V sat: SS Series V s = 3.8 Vdc, I sink = ma, B > operate max. V s = 3.8 Vdc, B > operate max..4.4 V Output leakage current: SS Series V s = 24 V, Vout = V, B < release min ua Output switching time: rise fall V s = 12 V, L = 1.6 kohm, C L = pf, T = 2 C [77 F] V s = 12 V, L = 1.6 kohm, C L = pf, T = 2 C [77 F] us Operating temperature -4 [-4] 1 [2] C [ F] Storage temperature - [-8] 1 [2] C [ F] Soldering temp. and time: SS Series wave soldering process: 2 C to 26 C [482 F to F] for 3 s max. infrared reflow process: peak temperature 24 C [473 F] for 1 s max. 1 For supply voltages above 24 Vdc, a capacitor may be needed between the output and supply pins to ensure proper operation. NOTE These Hall-effect sensor s may have an initial output in either the ON or OFF state if powered up with an applied magnetic field in the differential zone (applied magnetic field >Brp and <Bop). Honeywell recommends allowing 1 us after supply voltage has reached V for the output voltage to stabilize. NOTE The magnetic field strength (Gauss) required to cause the switch to change state (operate and release) will be as specified in the magnetic characteristics. To test the switch against the specified limits, the switch must be placed in a uniform magnetic field. CAUTION ELECTOSTAT SEITIVE DEVES DO NOT OPEN O HANDLE EXCEPT AT A STAT FEE WOKSTATION ESD SEITIVITY: CLASS 3 Figure 1. Circuit Diagram Hall-effect Trigger Circuit and Amplifier Vs () Output (O) Ground (-) 2 Sensing and Productivity Solutions

3 ,, or Hall-effect Digital s:, SS Series Table 2. Absolute Maximum Specifications Characteristic Min. Typ. Max. Unit Supply voltage (V s) -1 V Applied output voltage (V out): SS Series (off) Output current (I sink): V s = -1 Vdc to 24 Vdc V s = 24 Vdcto 2 Vdc V s = 2 Vdc to 26 Vdc V s = 26 Vdc to 27 Vdc V s = 27 Vdc to 28 Vdc V s = 28 Vdc to 29 Vdc V s = 29 Vdc to Vdc -. Magnetic flux no limit Gauss NOTE Absolute ratings are the extreme limits the device will momentarily withstand without damage to the device. Electrical and mechanical characteristics are not guaranteed if the rated voltage and/ or currents are exceeded, nor will the device necessarily operate at absolute ratings. Figure 2. Magnetic Activation V ma SS Series N S S N N S S N Label side Label side South pole toward : Output = Low North pole toward : Output = High South pole toward : Output = Low North pole toward : Output = High Figure 3. Circuit Diagrams DC Vdc Vdc 1 kohm TTL or DTL Gate Vdc 47 Ohm 1 Ohm Vdc Ohm LED 1 Vdc 1 ma Vdc Load 1.2 kohm 2N2222 NPN Transistor - ma - AC 13 Vdc 47 Ohm 1 Ohm 13 Vdc 2N3638 PNP Transistor ma elay coil 1 Vdc 1 47 kohm 7 Ohm Vdc PNP Transistor Load HI SC Vdc 4.7 kohm kohm Vdc PNP Transistor Load HI TIAC - LOW LOW Sensing and Productivity Solutions 3

4 4 Sensing and Productivity Solutions,, or Hall-effect Digital s:, SS Series Table 3. Magnetic Specifications Temperature Operating Characteristic Magnetic Characteristic (Gauss) SS411 SS11AT SS413 SS13AT SS441 SS41AT SS443 SS43AT SS449 SS49AT SS461 SS61AT SS466 SS66AT -4 C [-4 F] C [ F] C [77 F] C [18 F] C [27 F] C [2 F]

5 ,, or Hall-effect Digital s:, SS Series Figure 4. Operate and elease Point Performance Graphics SS411/SS11AT 2 1 Operate nom. elease nom. - elease min SS441/SS41AT 1 elease max. 6 4 Operate min. elease min SS413/SS13AT 2 1 Operate nom. - elease nom elease min SS443/SS443AT elease max. Operate min. elease min. SS449/SS49AT SS461/SS61AT elease max. Operate min Operate min. elease max. elease min. elease min SS466/SS66AT Operate min. elease max. elease min. Sensing and Productivity Solutions

6 ,, or Hall-effect Digital s:, SS Series Figure. Flat TO-92-Style Mounting and Dimensional Drawings (For reference only: mm/[in].) SS4XX: Straight Standard Leads, Bulk Pack 2, [.] 1,7 SS4XX-L: Straight Long Leads, Bulk Pack 2, [.] 1,7 [.118] [.118] 3X,6 Max., - 14,4 [ ] 3X,6 Max. 18,7 [.74] 2X 1,27 [.] SS4XX-T2: Formed Leads, Ammopack Tape-in-Box 1,7 2, [.] [.118] 2X 3,3 [.13], - 14,4 [ ] 2X 2,4 [.1],6 Max. 1 Adhesive tape 24, Max. [.] 1, [.787] 11, [.433] Fold 6, [.236] 9,1 [.34] 18, [7,9] Fold, Max. 1,42 Max. [.6] 6,3 [.2] 12,7 [.] ø4, [.7] 6 Sensing and Productivity Solutions

7 ,, or Hall-effect Digital s:, SS Series Figure. Flat TO-92-Style Mounting and Dimensional Drawings (For reference only: mm/[in].) SS4XX-T3: Straight Standard Leads, Ammopack Tape-in-Box 2, [.] 1,7 [.118] 3X,6 Max., - 14,4 [ ] 2X 1,27 [.] 1 Adhesive tape 24 1, Max. [.], [.787] 11, [.433] Fold 6, [.236] 9,1 [.34] 18, [7,9], Max. 1,42 Max. [.6] Fold 6,3 [.2] 12,7 [.] ø4, [.7] Sensing and Productivity Solutions 7

8 ,, or Hall-effect Digital s:, SS Series Figure. Flat TO-92-Style Mounting and Dimensional Drawings (continued) SS4XX-S: Surface Mount, Bulk Pack 2, [.] 1,7 PCB Land Pattern [.118] 2,32 [.] 1,24 [.6] 3,18 [.12] 1,2 [.6],813 [.32] 3X,6 Max. SS4XX-SP: Surface Mount, Pocket Tape and eel 1,7,41 Max. [.6] 4, [.7] 2, [.79] 8, [.3] ø1, [.9] A 1,7 [.69] 2, [.] [.118], [.217] 3,18 [.12] 1,2 [.6] 6,6 [.26] 12, [.472] 3X,6 Max. 1,7 [.67] Section A-A,1 [.4] Top cover tape 4,41 [.174] 12,2 [.4] Measured at hub A ø33,2 [1.] 18,39 Max. [.724] Measured at hub PCB Land Pattern 2,32 [.] 1,24 [.6],813 [.32] ø, [1.97] 1, Min. [.9] Drive spokes ø13, ø178 [.12] [7.1] Arbor hole 8 Sensing and Productivity Solutions

9 ,, or Hall-effect Digital s:, SS Series Figure 6. SS Series Mounting and Dimensional Drawings (For reference only: mm/[in].) SOT-89B, Pocket Tape and eel,16 [.6],96 [.38] Nominal center 1,7 [.67] Nominal center 2,49 2,39 [.94] 4,16 [.164], [.2] 1,37 [.4] 2X 1, [.9] 4,39 [.173] 3X,41 [.16] 2,31 Max. [.91],41 Max. [.16] 4, [.177] A 7,98 [.314] 3,99 [.7] 2,1 [.79] ø1, Min. [.9] 1,7 [.69],84 Max. [.2],1 [.4] Top cover tape,1 [.217] 11,99 [.472] 4,78 [.188] Section A-A 1,91 [.7] A 8, [.3] 12,19 [.4] Measured at hub 4,6 [.181] ø1 [.12] 3X 1, Min. [.9] 18,39 Max. [.724] ø33,2 [1.] ø. Min. [1.97] ø178 [7.1] Sensing and Productivity Solutions 9

10 ,, or Hall-effect Digital s:, SS Series Table 4. Order Guide for the (Flat TO-92-Style) Catalog Listing Description SS4XX: Straight standard leads, bulk pack, units/bag SS411A SS413A SS441A SS443A SS449A SS461A SS466A SS4XX-L: Straight long leads, bulk pack, units/bag SS411A-L SS413A-L SS441A-L SS443A-L SS449A-L SS461A-L SS4XX-T2: Formed leads, ammopack tape-in-box, units/box SS413A-T2 SS441A-T2 SS443A-T2 SS449A-T2 SS461A-T2 SS4XX-T3: Straight standard leads, ammopack tape-in-box, units/box SS411A-T3 SS413A-T3 SS441A-T3 SS443A-T3 SS449A-T3 SS461A-T3 SS4XX-S: Surface mount, pocket tape and reel, bulk pack, units/bag SS411A-S SS413A-S SS441A-S SS443A-S SS449A-S SS461A-S SS4XX-SP: Surface mount, pocket tape and reel, units/reel SS411A-SP SS413A-SP SS441A-SP SS443A-SP SS449A-SP SS461A-SP SS4XX SS4XX-T2 SS4XX-S SS4XX-L SS4XX-T3 SS4XX-SP Table. Order Guide for the SS Series (SOT-89B, Pocket Tape and eel, Units/eel) Catalog Listing Description SS11AT SS13AT SS41AT SS43AT SS49AT SS61AT SS66AT 1 Sensing and Productivity Solutions

11 ADDITIONAL INFOMATION The following associated literature is available on the Honeywell web site at sensing.honeywell.com: Product Line Guide Product ange Guide Selection Guides Application-specific Information WANING PESONAL INJUY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WANING MISUSE OF DOCUMENTATION The information presented in this datasheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Warranty/emedy Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship during the applicable warranty period. Honeywell s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgment or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items that Honeywell, in its sole discretion, finds defective. The foregoing is buyer s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. For more information Honeywell Sensing and Internet of Things services its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or the nearest Authorized Distributor, visit sensing.honeywell.com or call: Asia Pacific Europe 44 () USA/Canada While Honeywell may provide application assistance personally, through our literature and the Honeywell web site, it is buyer s sole responsibility to determine the suitability of the product in the application.specifications may change without notice. The information we supply is believed to be accurate and reliable as of this writing. However, Honeywell assumes no responsibility for its use. Honeywell Sensing and Productivity Solutions 96 Old Bailes oad Fort Mill, SC 2977 honeywell.com B-EN B 11/17 17 Honeywell International Inc. All rights reserved.