elspec elspec distribute GmbH elspec approved quality in direct distribution Cables

Transcription

1 elspec mbh elspec distribute elspec approved quality in direct distribution Cables

2 elspec connects! Since 1980, el-spec mbh has been one of the key cable and cable custom assembly suppliers in its specific market. Regardless of whether you need low loss, semi-rigid or cryogen cables, we are in a position to supply any specification you need to ensure the success of your project. Our specialists subject every single cable and each connector to rigorous item-by-item quality inspections. We diligently monitor our products full compliance with the desired specifications. Only products that have passed 100 % of the inspection criteria will also receive the quality seal elspec approved. Hence, you can rest assured that you can instantly use the items you have ordered as soon as they arrive at their destination. This will save you a lot of time and make your experience stress-free. We keep ample quantities of these standard products in stock at our warehouse in eretsried, ermany, at all times. Look for the elspec distribute brand to order them. If the product you need should not be part of our current inventory, please do not hesitate to contact our sales department at: sales@elspec.de or call: This also applies to our custom assemblies and special solutions. They are available under the elspec customize brand as well as under our elspec manufactory brand, which stands for hand-crafted special assemblies. Cables

3 Kabel with MIL Certification...4 Military, Radar, AWACS, Flight by wire, Airplanes, Helikopters, Vessels, Drones, Communication R and Non Halogen Cables...6 Automotive, Industrial Robots, Mobile Phone, Medical, Federal Low Loss Cables...8 Telekommunication, Satelite, Aircraft, Radar, Accellerators Low Noise and Sub Miniature Cables...10 Tomograph, Accellerators, X-Ray Non Magnetic and Temperature resistant...12 Accellerators, Sensortechnics, Oil platforms, Refineries, Medical Overview Connectors...14 Military, Radar, AWACS, Flight by wire, Airplanes, Helikopters, Vessels, Drones, Satelites, Telecommunication elspec distribute elspec approved quality in direct distribution

4 Military Legend: R MIL SUB TEMP NON HALOEN NON MAN LL LN CONSTRUCTION/LAYER: R cables from elspec are designed recording the US STANARD MIL-DTL / MIL-C-17. MIL cables from elspec comply in all aspects with the requirement of the US STANARD MIL-DTL. This products are continuously subjected to strict inspection during production. Test Reports in line with MIL-spec can be sent with shipment. These cables are the right answer wherever space savings or minimal diameter is the issue. Cables with special improvements for higher or lower temperature. NON HALOEN, LOW SMOKE and REDUCED TOXITY combined in these cables. Cables with NON MANETIC conductor for medical application. Low Loss Cables for superior demands regarding phase stability, lower attenuation and better VSWR. Low Noise Cables for applications where mechanical forces such as vibrations, bending or torsion movements have an impact on the cable. D: solid : braid F: foil SR: semirigid Inner Conductor Dielectric Art.-Code Type Version Description Construction MIL 03 M17/28-R58 CuSn L 0,90 PE 2, MIL 01 M17/93-R178 StCuAg L 0,30 PTFE 0, MIL 02 M17/94-R179 StCuAg L 0,30 PTFE 1, MIL 02 M17/113-R316 StCuAg L 0,51 PTFE 1, MIL 07d M17/75-R214 CuAg L 2,26 PE 7, MIL 07d M17/127-R393 CuAg L 2,40 PTFE 7, MIL 02d M17/ StCuAg L 0,51 PTFE 1, MIL 03 M17/60-R142 StCuAg L 0,94 PTFE 2, MIL 03d M17/128-R400 CuAg L 0,98 PTFE 2,95 The fast elspec world is green. And affordable. elspec distribute. That s all the items that are clearly defined, in stock as standard, and can be directly distributed. It is the best way to save yet still get high-grade precision items with tested and proven elspec quality. You know exactly what you need: simply order directly 4

5 OuterConductor Jacket Layer 1 Layer 2 Layer 3 Impedance (Ohm) Cut off Frequency Hz Attenuation db / 1Hz Power (W) Bend radius (mm) Weight kg/km C C Operating Temperture Temperature Min. C C Operating Temperture Temperature Max. 3,81 PVC 4, ,37 FEP 1, ,13 FEP 2, ,06 FEP 2, ,14 PVCIIa 10, ,65 FEP 9, ,44 FEP 2,90 12, ,34 FEP 4,95 12, ,34 FEP 4,95 12, via phone, fax or . Our team will put your order together and - depending on the details and the time of order - ship the ordered items within 24 hours. Simple, fast and good! 5

6 Industrie Industrial / Machinery Maschinen Legend: R MIL SUB TEMP NON HALOEN NON MAN LL LN CONSTRUCTION/LAYER: R cables from elspec are designed recording the US STANARD MIL-DTL / MIL-C-17. MIL cables from elspec comply in all aspects with the requirement of the US STANARD MIL-DTL. This products are continuously subjected to strict inspection during production. Test Reports in line with MIL-spec can be sent with shipment. These cables are the right answer wherever space savings or minimal diameter is the issue. Cables with special improvements for higher or lower temperature. NON HALOEN, LOW SMOKE and REDUCED TOXITY combined in these cables. Cables with NON MANETIC conductor for medical application. Low Loss Cables for superior demands regarding phase stability, lower attenuation and better VSWR. Low Noise Cables for applications where mechanical forces such as vibrations, bending or torsion movements have an impact on the cable. D: solid : braid F: foil SR: semirigid Inner Conductor Dielectric Art.-Code Type Version Description Construction R 01 R178 UL1971 StCuAg L 0,30 PTFE 0, R 02 R179 UL1971 StCuAg L 0,30 PTFE 1, R 02 R316 UL1971 StCuAg L 0,51 PTFE 1, R 03 R303 UL1971 StCuAg D 0,94 PTFE 2, R 02d R316D UL1971 StCuAg L 0,51 PTFE 1, R 03 R142 UL1971 StCuAg L 0,94 PTFE 2, R 03d R400 UL1971 CuAg L 0,98 PTFE 2, NON HALOEN 03 R058 FRNC-B CuSn L 0,90 PE 2, NON HALOEN 01 EF178 StCuAg L 0,30 XLPE 0, NON HALOEN 02 MRC100XL FRNC Cu L 0,48 XLPE 1, NON HALOEN 03d FRNC-B CuAg D 0,90 PE 2, NON HALOEN 07d FRNC-B CuAg L 2,26 PE 7,24 6

7 OuterConductor Jacket Layer 1 Layer 2 Layer 3 Impedance (Ohm) Cut off Frequency Hz Attenuation db / 1Hz Power (W) Bend radius (mm) Weight kg/km C C Operating Temperture Temperature Min. C C Operating Temperture Temperature Max. 1,37 FEP 1, ,13 FEP 2, ,06 FEP 2, ,71 FEP 4, ,44 FEP 2,90 12, ,34 FEP 4,95 12, ,34 FEP 4,95 12, ,81 FRNC-B 4, ,35 XLPE 1, F 2,11 XLFRNC 2,80 5, ,47 FRNC-B 5, ,14 FRNC-B 10,

8 Telecommunication Legend: R MIL SUB TEMP NON HALOEN NON MAN LL LN CONSTRUCTION/LAYER: R cables from elspec are designed recording the US STANARD MIL-DTL / MIL-C-17. MIL cables from elspec comply in all aspects with the requirement of the US STANARD MIL-DTL. This products are continuously subjected to strict inspection during production. Test Reports in line with MIL-spec can be sent with shipment. These cables are the right answer wherever space savings or minimal diameter is the issue. Cables with special improvements for higher or lower temperature. NON HALOEN, LOW SMOKE and REDUCED TOXITY combined in these cables. Cables with NON MANETIC conductor for medical application. Low Loss Cables for superior demands regarding phase stability, lower attenuation and better VSWR. Low Noise Cables for applications where mechanical forces such as vibrations, bending or torsion movements have an impact on the cable. D: solid : braid F: foil SR: semirigid Inner Conductor Dielectric Art.-Code Type Version Description Construction LL 03d 1030AF Cu D 1,04 PE 2, LL MRC240 MRC240 Cu D 1,42 PE 3, LL 07LL LL2773 / INDOOR Cu D 2,71 PE 7, LL LL335 LL335i CuAg D 2,26 PTFE 6, LL 03 SS402 StCuAg D 0,94 PTFE 2, LL 03d SB142 StCuAg D 0,94 PTFE 2, LL 085 SS405 StCuAg D 0,51 PTFE 1, LL 02 SB316 StCuAg L 0,51 PTFE 1, LL 085 SS405Flex CuAg L 0,48 PTFE 1,42 8

9 OuterConductor Jacket Layer 1 Layer 2 Layer 3 Impedance (Ohm) Cut off Frequency Hz Attenuation db / 1Hz Power (W) Bend radius (mm) Weight kg/km C C Operating Temperture Temperature Min. C C Operating Temperture Temperature Max. F 3,70 PVC/FRNC 5, F 4,52 PE 6, F 8,13 FRNC-B 10, F 7,04 FEP 7, F 3,58 FEP 4, F 3,86 FEP 4, F 2,19 FEP 2, F 2,24 FEP 2, ,96 ETFE 2,

10 Medicine Technology Legend: R MIL SUB TEMP NON HALOEN NON MAN LL LN CONSTRUCTION/LAYER: R cables from elspec are designed recording the US STANARD MIL-DTL / MIL-C-17. MIL cables from elspec comply in all aspects with the requirement of the US STANARD MIL-DTL. This products are continuously subjected to strict inspection during production. Test Reports in line with MIL-spec can be sent with shipment. These cables are the right answer wherever space savings or minimal diameter is the issue. Cables with special improvements for higher or lower temperature. NON HALOEN, LOW SMOKE and REDUCED TOXITY combined in these cables. Cables with NON MANETIC conductor for medical application. Low Loss Cables for superior demands regarding phase stability, lower attenuation and better VSWR. Low Noise Cables for applications where mechanical forces such as vibrations, bending or torsion movements have an impact on the cable. D: solid : braid F: foil SR: semirigid Inner Conductor Dielectric Art.-Code Type Version Description Construction LN 01 LN01 StCuAg L 0,30 PTFE 0, LN 02 LN71 StCuAg L 0,30 PTFE 1, LN 02 LN91 StCuAg L 0,30 PTFE 2, LN 02 LN02 StCuAg L 0,51 PTFE 1, SUB 005 MMK01 Cu D 0,10 PFA 0, SUB 05 MK71 CuAg D 0,10 PTFE 0, SUB 05 MK91 CuAg D 0,10 PTFE 0, SUB 05 MK01 CuAg D 0,16 PTFE 0, SUB 05 MK02 UL Style 1354 CuAg L 0,19 PFA 0, SUB 05 MK02DS-FB CuAg L 0,19 PFA 0, SUB 05 CE047 S05 StCuAg D 0,29 PTFE 0, SUB 05 CE034 S05 StCuAg D 0,20 PTFE 0,66 10

11 OuterConductor Jacket Layer 1 Layer 2 Layer 3 Impedance (Ohm) Cut off Frequency Hz Attenuation db / 1Hz Power (W) Bend radius (mm) Weight kg/km C C Operating Temperture Temperature Min. C C Operating Temperture Temperature Max. F 1,57 PFA 2, F 2,31 PTFE-T 2, F 3,33 PTFE-T 3, F 2,21 PTFE-T 2, ,43 PFA 0, n.a ,83 FEP 1, n.a ,86 FEP 1, 95 3 n.a. n.a ,80 FEP 1, n.a ,80 FEP 1, n.a F 1,00 FEP 1, n.a SR 1,19 Cu SR SR 0,86 Cu SR

12 Accelerators / Specials Legend: R MIL SUB TEMP NON HALOEN NON MAN LL LN CONSTRUCTION/LAYER: R cables from elspec are designed recording the US STANARD MIL-DTL / MIL-C-17. MIL cables from elspec comply in all aspects with the requirement of the US STANARD MIL-DTL. This products are continuously subjected to strict inspection during production. Test Reports in line with MIL-spec can be sent with shipment. These cables are the right answer wherever space savings or minimal diameter is the issue. Cables with special improvements for higher or lower temperature. NON HALOEN, LOW SMOKE and REDUCED TOXITY combined in these cables. Cables with NON MANETIC conductor for medical application. Low Loss Cables for superior demands regarding phase stability, lower attenuation and better VSWR. Low Noise Cables for applications where mechanical forces such as vibrations, bending or torsion movements have an impact on the cable. D: solid : braid F: foil SR: semirigid Inner Conductor Dielectric Art.-Code Type Version Description Construction NON MAN 03 R 58-8KVDC CuSn L 0,90 PE 2, NON MAN 02 MRC100XLFRNC Cu L 0,48 XLPE 1, NON MAN 07LL LL2773 / OUT u u IN IN Cu D 2,71 PE 7, NON MAN 03d R400 UL1971 CuAg L 0,98 PTFE 2, NON MAN 03 SS402 NON MANETIC CuAg D 0,94 PTFE 2, TEMP 02 R187A/U StCuAg L 0,30 PTFE 1, TEMP 02 R188A/U StCuAg L 0,51 PTFE 1, TEMP 07d XLPUR CuAg D 2,25 XLPE 7,24 12

13 Impedance (Ohm) Cut off Frequency Hz Attenuation db / 1Hz Power (W) Bend radius (mm) Weight kg/km Operating C COperating Temperature Min. Temperture Min. Operating C COperating Temperature Max. Temperture Max. Jacket Layer 3 Layer 2 Layer 1 OuterConductor 3,81 FRNC-B 4, F 2,11 XLFRNC 2,80 5, F 8,13 8,13 XLFRNC XLFRNC 10,30 10, ,34 4,34 FEP FEP 4,95 4,95 12,4 12, F 3,58 FEP 4, ,01 PTFE 2, ,03 PTFE 2, ,14 XLPUR 10,

14 Connectors (overview) The following connector types are immediately available for direct order: 3,80 mm N 11 Hz 3,80 mm PC-N 18 Hz 3, mm SMA 18 Hz 3, mm PC3,5 26,5 Hz 2,92 mm K 40 Hz 2,40 mm - Hz 1,85 mm V 67 Hz 1,00 mm W 110 Hz BNC SMB MCX PC-2.40 PC-2.92 (K) BNC 75 QMA SMP PC-1.85(V) PC-N PC-1, N

15 Cables Cables and Connectors from elspec Quality pays for itself. Cryogenic Cables are Semi-rigid cables with an outer conductor of stainless steel are commonly used in systems experiencing temperatures ranging above or below C to +1 C. Cryogenic systems are sensitive to heat transfer into the Dewar chamber and rely on the relatively low heat transfer characteristics of certain stainless steel alloys. The higher attenuation of these cables can be offset by using a special bimetallic construction pioneered by Precision Tube Company which effectively has the same loss as copper. This utilizes a thin skin of copper immediately adjacent to the dielectric which acts as the primary conductor at microwave frequencies. considered if preservation of signal strength is a concern. Lossy Cables Our unique lossy cables can be used as infi nite loads for testing components where end termination reflections are undesirable. These cables utilize a resistance wire center conductor which is unplated and a Teflon dielectric. Outer conductor materials other than copper can be utilized for even higher losses or other special characteristics that they contribute. elspec is amongst the few companies, who are certified to assembly cryogenic cables and corresponding connectors. This will have a slightly higher heat conduction than stainless steel alone but must be 15

16 elspec mbh Lauterbachstr. 23c D eretsried-elting, ermany Tel: Fax.: Konzept, Fotografie und Text, Layout und estaltung 2014 kpr kommunikation Klünsch PR Error and omission excepted. Subject to change without notice