Multi-band Antennas for Vehicle, IoT and M2M Applications

Transcription

1 Multi-band Antennas f Vehicle, IoT and M2M s YOUR INTRODUCTION TO PULSELARSEN MULTI-BAND ANTENNAS. Want learn me? Visit our website at pulselarsenantennas.com

2 PULSELARSEN MULTI-BAND ANTENNAS Whether your need is f antennas f police, utility trucks, ambulances, agricultural recreational vehicles, public transptation remote moniting and control PulseLarsen has your multi-band solution. F over 0 years we have produced vehicular/outdo ruggedize antennas. Our expertise covers G/G(LTE), WiFi, GPS(GNSS), ISM, and other Technologies. F precise navigation our solutions cover all satellite navigation types including GPS, GLONASS, Beidou/ MULTI-BAND ANTENNA SUMMARY Compass, and Galileo. Plus we have products that combine navigation with data transmission f complete telematics requirements. Our navigation antennas are designed f use in trucking, commercial fleets, utility, public safety, search and rescue, GPS and mapping markets. F utility applications we fer extensive ruggedized, tamper-pro and aesthetically pleasing solutions. Our fering includes antennas with lowest prile, steel mounting studs with steel nuts, -Rated plastics and other features keep idle hands from tampering with the antenna. Panther Jaguar Armadillo (Now Sampling) Razback FIN DISC PANTHER FAMILY JAGUAR FAMILY Best Perfmance Low Cost Best Gain, Efficiency, VSWR, and Pt--Pt Isolation Low prile Good Perfmance Various Install s Low Prile Good Perfmance Tamper-pro steel stud Narrowest Package Best Perfmance Narrow Prile, Tamper-pro steel stud Best Good Perfmance Perfmance. Aesthetically ISM Options pleasing No. Pts Baseline Configuration WiFi -Dual Band (x) ü ü ü ü WiFi -Dual Band (2x) ü ü ü ü WiFi -Dual Band (1x) ü ü ü ü LTE (1x) WiFi-Dual Band (1x) GPS-full GNSS (1x) ü ü ü ü ü ü ARMADILLO FAMILY RAZORBACK FAMILY 2 G - ISM - (1x) GPS -Full GNSS (1x) LTE (1x) GPS-full GNSS (1x) LTE (2x) ü ü ü ü ü Col Options,,, DISC FAMILY FIN FAMILY Ideal Placement Either: On Ground Plane; On Non-Metal Surface Either: On Non-Metal Surface; On Ground Plane if base used. On Ground Plane Either: On Ground Plane ; On Non-Metal Surface On Ground Plane Either: On Ground Plane ; On Non-Metal Surface Package Available Direct Mount Stud (Magnetic Mount available) Adhesive Mount (Magnetic Mount and Fixed Mount Adapters available) Direct Mount Stud (Magnetic Mount versions available) Direct Mount Stud (Magnetic Mount versions available) Direct Mount Stud Direct Mount Stud (Magnetic Mount Versions Available) On Ground Plane: Best if installed on metal vehicle ro, metal utility box, other metal structucture. On Non-Metal: Best if installed on fiberglass, plastic, other non-metallic surface. Contact facty if any concerns about installation methods.

3 PANTHER - GPSMBXXX FIN - GPSDMXXX DISC - W1XXX GPSMB02 GPSMB01 GPSDM700/800GGT W1 GPSLPMB01 Every efft is made assure the integrity and long life each Pulse product. In the unftunate event a problem does occur, you will find us ready make it right! Duration warranty is one year from date purchase. Pulse will repair replace without charge any Larsen antenna product which fails f any reason during the warranty period. Pulse is not responsible f any incidental consequential damages due failure the antenna under this warranty any implied warranty. This exclusion may not apply all areas the USA Canada. PAN211DM ( radome) PAN212DM () GPSMB01 ( radome) GPSMB02 () GPSMB01 () GPSMB02 () GPSMB01 () GPSMB02 () s s PANTHER (PAN, GPSMB) * Measured with a default cable length in free space. ** Measured with inch cable with 0" GP. *** Measured with " cable with 2" GP. Attenuation cable assembly with 17' RG8 and PANTHER (PAN, GPSMB) Peak Gain*** Isolation* (db) Length Connect / < -1 LTE L: 1. (.8 ) x Direct mount, 7/8 17ft / W: 11.9 (.98 ) (22mm) threaded RP- 2.GHz, 180mm 2 < x RP- GHz H: 7 (.0 ) RP- LNA gain:0db, NF: < 2.dB, DC power: -V RG / < LTE 2 L: 1.8 (.8) Direct mount, 7/8 W:11.8 (.98) (22mm) threaded RP- < mm GHz H: 7 () 2 RP- LNA gain:0db, NF: < 2.dB, DC power: -V RG / < LTE 2 L: 1.8 (.8) Direct mount, 7/ / W:11.8 (.98) (22mm) threaded < 1. N/A 180mm 92 GHz H: 7 () RP- LNA gain:0db, NF: < 2.dB, DC power: -V RG / < L: 1.8 (.8) Direct mount, 7/8 LTE 2 W:11.8 (.98) (22mm) threaded 180mm H: 7 () LNA gain:0db, NF: < 2.dB, DC power: -V RG 17 GPSMBMM Magnetic Mount Bracket Magnetic Mount Bracket GPSDM700/ 800GGT () GPSDMW 700/800GGT () GPSDM700/ 900GG s s 2 s s W1 2 W1MM 2 GPSDM (FIN FAMILY:SKF) GPSDM (FIN FAMILY: SKF) col HB Peak Gain ** Isolation* Length LTE 98-90/ < Dia.: 108 (.2) / 10- (19.mm) threaded < GHz (vs LTE) H: 88. (.8) 180mm RP- 87 GPS 17.2 < 2 LNA gain:28db, NF: < 1.dB, DC power:.-v RG LTE 98-90/ < Dia.: 108 (.2) (19.mm) threaded H: 88. (.8) 180mm GPS 17.2 < 2 LNA gain:28db, NF: < 1.dB, DC power:.-v RG 17 GSM/UMTS ISM W1 (DISC FAMILY: DSC) VSWR* W1 (DISC: DSC) col ( available) Peak Gain*** Isolation* 82-90/ < 2 Dia.: 100 (.9) (19mm) 1.2ft/ LNA gain:0db, NF: < 2.dB, DC power:.-v H:.8 (1.7) Thread hole RG mm / < 2 Dia.: 100 (.9) Magnetic Mount H:.8 (1.7) LNA gain:0db, NF: < 2.dB, DC power:.-v RG 17 Length 1.2ft/ 000mm 1.2ft/ 000mm Connect - detail GNSS: MHz±2.0/ 17.2MHz±1.02/ 102.2MHz± - Please contact sales f options cusmized cable type, cable length, and connect type. col HB HB HB

4 ARMADILLO FAMILY Low Prile Good Perfmance Narrowest Package Tamper-pro steel stud ARM211DM ( radome) ARM212DM ( radome) s s ARMADILLO (ARM) ARMADILLO (ARM) Peak Gain ** Length Connect LMR19 17ft LTE < 2. LMR19 17ft LMR19 17ft RP- W: 88 (.) (19mm) threaded / < GHz LMR19 17ft RP- H: (1.8) / < GHz LMR19 17ft RP- col -0C ARM2211DM ( radome) ARM2212DM ( radome) ARM2111DM () ARM2112DM () ARM2011DM () ARM2012DM () ARM2111MM (, Magnet Mount) ARM2112MM (, Magnet Mount) ARM2111AM (, Adhesive Mount) ARM2112AM (, Adhesive Mount) LNA gain:0db, NF: < 2.dB, DC RG17 17ft power:.-v LMR19 17ft < 2. LTE LMR19 17ft / < GHz LMR19 17ft RP- W: 88 (.) (19mm) threaded / < GHz H: (1.8) LMR19 17ft RP- LNA gain:0db, NF: < 2.dB, DC RG17 17ft power:.-v LMR < 2. LTE LMR / < GHz W: 88 (.) (19mm) threaded LMR19 180mm RP- H: (1.8) LNA gain:0db, NF: < 2.dB, RG17 DC power:.-v < 2. LTE 2 (19mm) threaded LMR19 W: 88 (.) 180mm LNA gain:0db, NF: < 2.dB, H: (1.8) RG17 DC power:.-v LMR < 2. LTE LMR / < GHz W: 88 (.) Magnetic mount LMR19 180mm RP- H: (1.8) LNA gain:0db, NF: < 2.dB, RG17 DC power:.-v LMR < 2. + LTE + LMR / Adhesive mount < 2 W: 88 (.) 180mm GHz + LMR19 RP- H: (1.8) LNA gain:0db, NF: < 2.dB, RG17 DC power:.-v -0C * Measured with a default cable length in free space. + Measured without Ground Plane (GP). ++Measured with 1 bracket and 0 GP. ** Measured with cable with 0 GP. Attenuation cable assembly with 17 LMR19 - detail GNSS: MHz±2.0/ 17.2MHz±1.02/ 102.2MHz± - Please contact sales f options cusmized cable length and connect type.

5 JAGUAR FAMILY Low prile Good Perfmance Various Install s Excellent f-ground plane perfmance Ideal f plastic and fiberglass mounting Idea f bracket mounting JAG2211DM (GPSLPMB01+) JAG2201AM (LPMB01+) No. s W1919+** 2 JAGUAR ELECTRICAL SPECS MECHNICAL SPECS ENVIROMENTAL SPECS Peak Gain Isolation Length JAGUAR LMR19 000mm 98-90/ < 2. LTE L: 1 (.7) LMR19 000mm Adhesive / GHz (vs LTE) W: 1 (.) mount LMR19 000mm RP- H: 2 (0.98) LNA gain:0db, NF: < 2.dB, DC power: LMR100 LMR19 000mm 98-90/ < 2. LTE L: 1 (.7) Adhesive LMR19 000mm W: 1 (.) 2.GHz H: 2 (0.98) LMR mm RP / < -1 GHz LMR mm RP / < 2.0 LTE / < @ MHz L: 78.2 (.1) RG mm Adhesive W: 78.2 (.1) mount H: 0. (1.2) RG mm col -0C -0C * Measured with a default cable length in free space. Attenuation cable assembly with 10-feet LMR19 is 2. and. ** W1919 is slightly smaller than rest Jaguar family. See datasheet f details. + Jaguar family is Ground Plane (GP) independent and wks best on plastic, fiberglass surfaces in free space, away from metal. F situations where Jaguar must be place on metal surface, an adapter bracket is available provide proper distance from metal if desire. - detail GNSS: MHz±2.0/ 17.2MHz±1.02/ 102.2MHz± - Please contact sales f options cusmized cable length and connect type.

6 RAZORBACK FAMILY Best Perfmance Narrow Prile Tamper-pro Steel Stud RAZ211DM ( ) RAZ211DM ( ) RAZ2211DM ( radome) RAZ2212DM ( radome) RAZ2111DM ( radome) RAZ2112DM ( radome) RAZ2011DM ( radome) RAZ2012DM ( radome) No. s RAZORBACK RAZORBACK ELECTRICAL SPECS MECHNICAL SPECS ENVIROMENTAL SPECS Peak Gain ** Isolation Length Connect LMR19 17ft < 2. LTE LMR19 17ft / / / < GHz -1 LMR19 17ft RP- L: 19 ( 7. ) Direct mount, 1 threaded < GHz -1 W: 87 (. ) LMR19 17ft RP- H: 92 (. ) < GHz -1 LMR19 17ft RP- LNA gain:0db, NF: < 2.dB, DC power:.-v RG17 LMR19 17ft < 2. LTE LMR19 17ft L: 19 (7. ) Direct mount, 1 threaded 2.GHz LMR19 17ft RP- < 2-1 W: 87 (.) GHz H: 92 (.) LMR19 17ft RP- LNA gain:0db, NF: < 2.dB, DC power:.-v RG17 LMR19 17ft < 2. LTE LMR19 17ft L: 19 (7. ) (19mm) / (vs < GHz W: 87 (.) threaded LMR19 17ft RP- LTE) H: 92 (.) LNA gain:0db, NF: < 2.dB, DC power:.-v RG17 LMR19 17ft < L: 19 (7. ) LTE 2 (19mm) threaded LMR19 17ft W: 87 (.) LNA gain:0db, NF: < 2.dB, DC H: 92 (.) RG17 17ft power:.-v -0C -0C -0C -0C * Measured with a default cable length in free space. + Measured without Ground Plane (GP). ++Measured with 1 bracket and 0 GP. ** Measured with cable with 0 GP. Attenuation cable assembly with 17 LMR19 - detail GNSS: MHz±2.0/ 17.2MHz±1.02/ 102.2MHz± - Please contact sales f options cusmized cable length and connect type.

7 MANUFACTURING CAPABILITIES - AVAILABLE TRADITIONAL TECHNOLOGIES Stamping Plastic injection molding Heatstaking Welding (Spot, USW, Induction) Plasma Treatment Flexible Printed Circuit PROTOTYPING ABILITIES WORLDWIDE (AMERICAS, EMEA, ASIA) D printing plastic parts, FR Stamping parts using LPKF machines, CNC, Plastisol Dipping techniques, Lathes, Milling machines... TESTING SERVICES - TESTING CAPABILITIES FOR PRODUCT QUALIFICATION AND DESIGN VALIDATION S-Parameters using VNA up 1GHz Impedance Insertion Losses Isolation Ptable VNA f on-site Tuning with cusmers D radiation Patterns using Wldwide anechoic chambers Satimo/ETS) D RF simulation ols (CST, Optenni, Ibwave, AWR) WiFi Throughout testing using IXIA Chariot Expertise in advance RF behaviours with/without body PAD printing, Painting In-House Ceramic Process Any Assemblies Any Connect Mounts SMD Process Aumatic Stripping Ability use Solidwks, Catia VS, Pro E, ProgeCAD D fitting and rendering Mechanical Shock Solderability Tensile Strength Pull Fce Tque testing Surface Prilometer Epoxy resins and Glue deposition Plastic Dipping RF Testing Any Connect Mounts Au Packaging and Labeling ELECTRICAL MECHANICAL ENVIRONMENTAL ESD enviroment f Production &/ Design Humidity ( 90% RH) Moisture Thermal Shock Thermal Cycling with/without salt mist Aging Vibrations NOTE: Full EMC Standards Compliance Testing in Germany f any vehicle size (Truck, Car, Tract, Escalat, Agricultural machines and IoT). * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * CHANGES / CONDITIONS: Continual research and development make it necessary f Pulse reserve the right make exceptions changes in policies, specifications and prices without notice. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * CONTACT US TODAY! Call us at ANTENNA Visit our website at: pulselarsenantennas.com Connect with us on twitter: PulseLarsen1 Wldwide Headquarters San Diego, CA, USA 12 Innovation Drive #100 San Diego, CA PulseLarsen Antennas Headquarters Vancouver, WA, USA SE th Street Suite 20, Building 2 Vancouver, WA 988 Tel: antennas.us@pulseelectronics.com CHECK OUT PULSELARSEN'S Europe - Finland CELLULAR MODEM CROSS REFERENCE Aumaatiotie 1, FI-900 Oulunsalo. Tel: antennas.eu@pulseelectronics.com Europe - Germany Campus Berliner Allee Berliner Allee D-29 Darmstadt Germany Tel: antennas.eu@pulseelectronics.com ISO Manufacturing Site No 99. Huo Ju road, Suzhou new District, Jiangsu Province, Suzhou, China, PRC. Tel: antennas.as@pulseelectronics.com F the best match between our antennas and the latest cellular access devices from Sierra Wireless, Cradlepoint, CalAmp, Digi, Cloudgate and other p manufacturers VERSION 2