Satellite Broadcast Receivers

Transcription

1 Satellite Broadcast Receivers S-4C-FB S-5C-FB S-7C-FB S-1C-FB S-5C-FB(AL) *1 FINE CABLE *2 SN-S-4C-FB *2 SN-S-5C-FB *2 SN-S-7C-FB *2 Jacket(PVC) Outer Conductor 2(tinned annealed copper wire braid) (fine aluminium wire braid) *1 Outer Conductor 1(bonded foil plastic tape) *2 ( laminated plastic tape) (foamed polyethylene) We widely offer from the cable which is strictly compliant to JIS352 standard to the cables with following specific features; Highly foamed plastic insulation is adopted to realize low loss than ever Super noiseless type enables to improve anti-noise property by the tight adherence between aluminum tape and insulation Lead free PVC sheath ECO model applies Halogen free materials which are friendly to environment Compliance to RoHS TV receivers and related equipment Satellite communication, interactive CATV Connection between BS converter and BS tuners Common TV receiving system in the buildings and etc. (annealed copper wire) SNT-S-4C-FB SNT-S-5C-FB SNT-S-7C-FB SN-4C-HFB Jacket(PVC) Jacket(PVC) Outer Conductor 3( aluminum foil plastic tape) Outer Conductor 2(tinned annealed copper wire braid) Outer Conductor 1( aluminum foil plastic tape) (foamed polyethylene) Outer Conductor 2(tinned annealed copper wire braid) Outer Conductor 1(bonded foil plastic tape) (highly foamed polyethylene) (annealed copper wire) (tinned annealed copper wire) [Nos./mm] S-4C-FB 1/ S-5C-FB 1/ S-7C-FB 1/ S-1C-FB 1/ S-5C-FB(AL) 1/ FINE CABLE (SN-S-2.5C-FB) 1/ SN-S-4C-FB 1/ SN-S-5C-FB 1/ SN-S-7C-FB 1/ SNT-S-4C-FB 1/ SNT-S-5C-FB 1/ SNT-S-7C-FB 1/ SN-4C-HFB 1/ Outer Conductor 1 Tape Material Outer Conductor 2 [mm/nos.] Outer Conductor 3 Tape T Seath Color laminated plastic tape.14/3/24* 6.±.5 4 Black,Gray laminated plastic tape.14/4/24* 7.7±.3 63 Black,Gray,White,Brown,Navyblue laminated plastic tape.18/5/24* 1.2±.5 15 Black,Gray,White,Brown laminated plastic tape.2/7/ ± Gray laminated plastic tape.14/4/24* 7.7±.3 53 Black,Gray bonded double sided aluminum foil plastic tape.12/4/16 4.2±.3 22 Black,Gray,Bluegreen bonded double sided aluminum foil plastic tape.14/3/24* 6.±.5 4 Gray,Ivory bonded double sided aluminum foil plastic tape.14/4/24* 7.7±.3 63 Black,Gray,White,Navyblue,Ivory bonded double sided aluminum foil plastic tape.18/5/24 1.2± Navyblue laminated plastic tape.14/3/24*.5 6.±.5 42 Black,Gray laminated plastic tape.14/4/24*.5 7.7±.5 67 Black,Gray laminated plastic tape.18/5/ ± Black,Gray laminated plastic tape.14/3/24* 6.±.5 42 Gray,Navyblue Order products There are eco-products *Braid structure : different pitch construction is available 1

2 Attenuation comparison 8 Terrestrial digital broadcasting BS-IF CS-IF FINE CABLE 7 6 Attenuation [db/km] S-4C-FB, SN-S-4C-FB SNT-S-4C-FB SN-4C-HFB SN-5C-FB S-5C-FB, EM-S-5C-FB, SNT-S-5C-FB, S-5C-FB(AL) S-7C-FB, EM-S-7C-FB SNT-S-7C-FB S-1C-FB Frequency [MHz] The example of connector ass'y F-type(waterproof) F-type(with pin) F-type(without pin) F-type Electrical Characteristics Characteristic Impedance [Ω] Capacitance 1 khz [nf/km] Conductor Resistance 2 [Ω/km] Dielectric Withstand Voltage [ACV/min.] Insulation Resistance [MΩkm] Std. Attenuation 2 [db/km] 77MHz 177MHz 262MHz S-4C-FB 75±3 55±3 max min (478) S-5C-FB 75±3 55±3 max min (4) S-7C-FB 75±3 55±3 max min (3) S-1C-FB 75±3 55±3 max min (29) S-5C-FB(AL) 75±3 55±3 max min FINE CABLE (SN-S-2.5C-FB) 75±3 58±3 max min (694) SN-S-4C-FB 75±3 55±3 max min (478) SN-S-5C-FB 75±3 55±3 max min (4) SN-S-7C-FB 75±3 55±3 max min (3) SNT-S-4C-FB 75±3 55±3 max min (478) SNT-S-5C-FB 75±3 55±3 max min (4) SNT-S-7C-FB 75±3 55±3 max min (3) SN-4C-HFB 75±3 5±3 max min (438) Order products There are eco-products 2

3 TV Receivers(75Ω) 3C-2V 3C-2V kikaku 3C-2V(CCA) *3 3C-2V. S *1 5C-2VE 5C-2V kikaku 5C-2VJ *1 7C-2V 7C-2VJ *1 1C-2V 5C-FV *2 3C-FV *2 Jacket(PVC) High quality solid polyethylene is adopted as insulator Easy to bend and convenient to be installed into the inside of buildings Low loss model adopts foamed polyethylene insulation to improve cable loss Compliance to RoHS TV receivers and related equipment Interior wiring of ordinary housings Antenna feeder lines Wiring between or inside the high frequency equipment Outer Conductor(annealed copper wire braid or copper cladded aluminum wire bride) *3 (solid polyethylene or foamed polyethylene) *2 (annealed copper wire or annealed concentric stranded copper wire) *1 3C-2W 5C-2W Jacket(PVC) Outer Conductor 2(annealed copper wire braid) Outer Conductor 1(annealed copper wire braid) (solid polyethylene) (annealed copper wire) [Nos./mm] Outer Conductor 1 [mm/nos.] Outer Conductor 2 [mm/nos.] 3C-2V 1/ /4/24* 5.3±.3 37 Black,Gray 3C-2V kikaku 1/ /5/24 5.3±.3 46 Black 3C-2V(CCA) 1/ /6/16 5.3±.3 3 Black 3C-2W 1/ /5/24.14/5/24 6.3±.5 71 Black 3C-2V S 7/ /5/24 5.4±.5 45 Black 5C-2VE 1/ /5/24 7.4±.5 66 Black 5C-2V kikaku 1/ /7/24 7.4±.5 74 Black 5C-2W 1/ /7/24.14/7/24 8.3±.5 12 Black 5C-2VJ 7/ /7/24 7.4±.5 75 Black 7C-2V 1/ /8/24 1.4±.5 14 Black 7C-2VJ 7/ /8/24 1.4±.5 14 Black 1C-2V 1/ /1/24 13.±.6 24 Black 5C-FV 1/ /7/24 7.4±.5 66 Black 3C-FV 1/ /5/24 5.4±.3 39 Black Seath Color Order products There are eco-products *Braid structure : different pitch construction is available 3

4 Attenuation comparison 7 Terrestrial digital broadcasting 3C-2VS 6 Attenuation [db/km] C-2V,3C-2V KIKAKU 3C-2V(CCA),3C-2W EM-3C-2E 5C-2VJ 3C-FV 5C-2VE,5C-2V KIKAKU,5C 7C-2VJ 5C-FV 7C-2V 1C-2V Frequency [MHz] The example of connector ass'y F-type (with pin) F-type (without pin) BNC-type Electrical Characteristics Characteristic Impedance [Ω] Capacitance 1 khz [nf/km] Conductor Resistance 2 [Ω/km] Dielectric Withstand Voltage [ACV/min.] Insulation Resistance [MΩkm] Reference Std. Attenuation 2 [db/km] 22MHz 47MHz 77MHz 3C-2V 75±3 67±3 max min C-2V kikaku 75±3 67±3 max min C-2V(CCA) 75±3 67±3 max min C-2W 75±3 67±3 max min C-2V S 75±3 67±3 max. 1 1 min C-2VE 75±3 67±3 max min C-2V kikaku 75±3 67±3 max min C-2W 75±3 67±3 max min C-2VJ 75±3 67±3 max min C-2V 75±3 67±3 max min C-2VJ 75±3 67±3 max min C-2V 75±3 67±3 max min C-FV 75±3 57±3 max min C-FV 75±3 57±3 max min Order products There are eco-products 4

5 Radio(5Ω) 3D-2V 5D-2V 8D-2V 1D-2V RG-58A/U *1 Jacket(PVC) High quality solid polyethylene is adopted as insulator Easy to bend and convenient to be installed into the inside of buildings FB type adopts foamed polyethylene insulation to realize low loss Double shielding construction which is composed of aluminum tape and copper braid is applied to shield to improve shielding effect We can offer light weight model too Compliance to RoHS Outer Conductor(annealed copper wire braid) (tinned annealed copper wire) *1 (solid polyethylene) (annealed copper wire) (tinned anneaed copper bunch stranded conductors) *1 Internal wiring of radio communication Wireless equipment for Personal radio, MCA, AVM and amateur radio communication Antenna feeder lines Wiring between or inside high frequency equipment 5D-2W 3D-FB SN-8D-HFBE *2 5D-FB 8D-HFBE SUPER LIGHT *3 8D-FB 1D-FB Jacket(PVC) Jacket(PVC) Outer Conductor 2(annealed copper wire braid) Outer Conductor 1(annealed copper wire braid) (solid polyethylene) Outer Conductor 2(tinned annealed copper wire braid) (fine aluminium wire braid) *3 Outer Conductor 1( laminated plastic tape) (bonded foil plastic tape) *2 (highly foamed polyethylene) *3 (annealed copper wire) (annealed copper wire) (copper cladded aluminum) *3 [Nos./mm] Outer Conductor 1 Outer Conductor 2 Tape Material [mm/nos.] [mm/nos.] Seath Color 3D-2V 1/ /5/24 5.3±.3 45 Black,Gray,White 5D-2V 1/ /7/24 7.3±.5 79 Black,Gray 5D-2W 1/ /7/24.14/7/24 8.± Gray 8D-2V 1/ /8/ ± Gray 1D-2V 1/ /1/ ±.5 26 Gray 3D-FB 1/ D-FB 1/ D-FB 1/ D-FB 1/ SN-8D-HFBE 1/ D-HFBE SUPER LIGHT 1/ laminated plastic tape.14/4/16 5.6±.3 43 Black laminated plastic tape.14/4/24* 7.7±.3 8 Black laminated plastic tape.18/5/24 11.±.4 16 Black laminated plastic tape.2/7/ ±.5 23 Black bonded double sided aluminum foil plastic tape.18/5/24 11.±.4 15 Black laminated plastic tape.18/5/24 11.± Black RG-58A/U 19/ /7/16* 4.95± Black Order products There are eco-products *Braid structure : different pitch construction is available 5

6 Attenuation comparison 12 RG-58A/U Wireless LAN 1 3D-2V Attenuation [db/km] D-FB 5D-2V,5D-2W,EM-5D-2E 8D-2V,EM-8D-2E 5D-FB,EM-5D-FB 1D-2V,EM-1D-2E 2 8D-FB,EM-8D-FB SN-8D-HFBE, 8D-HFBE SUPER LIGHT 1D-FB,EM-1D-FB Frequency [MHz] The example of connector ass'y N-type (Non-waterproof) N-type (waterproof) N-type (waterproof) BNC-type TNC-type Electrical Characteristics Characteristic Impedance [Ω] Capacitance 1 khz [nf/km] Conductor Resistance 2 [Ω/km] Dielectric Withstand Voltage [ACV/min.] Insulation Resistance [MΩkm] Std. Attenuation 2 [db/km] 1MHz 2MHz 9MHz 3D-2V 5±2 12±4 max min (471) 5D-2V 5±2 1±4 max min (295) 5D-2W 5±2 1±4 max min (295) 8D-2V 5±2 1±4 max min (25) 1D-2V 5±2 12±4 max min (18) 3D-FB 5±2 84±4 max min D-FB 5±2 83±4 max min D-FB 5±2 83±4 max min D-FB 5±2 84±4 max min SN-8D-HFBE 5±2 76±4 max min D-HFBE SUPER LIGHT 5±2 76±4 max min RG-58A/U 5±2 approx.1 max min Order products There are eco-products 6

7 CATV S-5C-HFL S-7C-HFL S-1C-HFL High foamed polyethylene or high foamed plastic is applied in insulation to reduce cable loss Good V.S.W.R. over wide wave range Weather resistant black polyethylene is adopted as jacket Weather resistant black polyethylene is adopted as jacket Compliance to RoHS Jacket(polyethylene Black) CATV branch line and lead in line Outer Conductor(aluminum laminate tape) (highly foamed polyethylene) Related matters: Lashing wire color (annealed copper wire) Brown S-5C-HFL-SSF S-7C-HFL-SSF S-1C-HFL-SSF Lashing wire Support wire Main cable [Nos./mm] Outer Conductor Tape Material Support wire wires/conductor dia. Lashing wire wires/conductor dia. S-5C-HFL 1/ aluminum laminate tape 7.7±.3 5 S-7C-HFL 1/ aluminum laminate tape 1.±.5 8 S-1C-HFL 1/ aluminum laminate tape 12.9±.7 12 S-5C-HFL-SSF 1/ aluminum laminate tape 1/1.6 1/1. 7.7±.3 8 S-7C-HFL-SSF 1/ aluminum laminate tape 7/1.2 1/1. 1.±.5 17 S-1C-HFL-SSF 1/ aluminum laminate tape 7/1.4 1/ ±

8 Attenuation comparison 4 Terrestrial digital broadcasting BS-IF CS-IF 35 S-5C-HFL Attenuation [db/km] S-7C-HFL S-1C-HFL Frequency [MHz] Electrical Characteristics Characteristic Impedance [Ω] Capacitance 1 khz [nf/km] Conductor Resistance 2 [Ω/km] Dielectric Withstand Voltage [ACV/min.] Insulation Resistance [MΩkm] Std. Attenuation 2 [db/km] 9MHz 77MHz 13MHz S-5C-HFL 75±3 5±3 max min S-7C-HFL 75±3 5±3 max min S-1C-HFL 75±3 5±3 max min S-5C-HFL-SSF 75±3 5±3 max min S-7C-HFL-SSF 75±3 5±3 max min S-1C-HFL-SSF 75±3 5±3 max min

9 CATV(Super noiseless construction) SN-5C-HFBE SN-7C-HFBE Jacket(polyethylene Black) Outer Conductor 2(fine aluminium wire braid) Super noiseless (Compared with the aluminum laminate tape) construction excellent in bending durability and shielding property is applied Good V.S.W.R. over wide wave range Weather resistant black polyethylene is applied in jacket Fine aluminum braiding technology enables to reduce 15% of weight and to simplify wiring installation Compliance to RoHS CATV lead in lines Best for interactive CATV systems Outer Conductor 1( aluminum foil plastic tape) (highly foamed polyethylene) Related matters: Lashing wire color (annealed copper wire) Blue-green Sky blue Brown Black SNT-5C-HFBE SNT-7C-HFBE SNT-5C-HFBE-SSF SNT-7C-HFBE-SSF Jacket(polyethylene Black) Lashing wire Outer Conductor 3( aluminum foil plastic tape) Outer Conductor 2(fine aluminium wire braid) Outer Conductor 1( aluminum foil plastic tape) Main cable Support wire (highly foamed polyethylene) (annealed copper wire) [Nos./mm] SN-5C-HFBE SN-7C-HFBE SNT-5C-HFBE SNT-7C-HFBE SN-5C-HFBE-SSF SN-7C-HFBE-SSF SNT-5C-HFBE-SSF SNT-7C-HFBE-SSF Outer Conductor 1 Tape Material Outer Conductor 2 [mm/nos.] Outer Conductor 3 Tape Material Support wire wires/conductor dia. Lashing wire wires/conductor dia. aluminum foil plastic tape.14/4/24 7.7±.3 45 aluminum foil plastic tape.14/5/24* 1.2±.5 75 aluminum foil plastic tape.14/4/24 aluminum foil plastic tape.14/5/24* aluminum foil plastic tape 7.7±.3 45 aluminum foil plastic tape 1.2±.5 75 aluminum foil plastic tape.14/4/24 1/1.6 1/1. 7.7±.3 8 aluminum foil plastic tape.14/5/24* 7/1.2 1/1. 1.2± aluminum foil plastic tape.14/4/24 aluminum foil plastic tape.14/5/24* aluminum foil plastic tape 1/1.6 1/1. 7.7±.3 8 aluminum foil plastic tape 7/1.2 1/1. 1.2± Order products *Braid structure : different pitch construction is available 9

10 Attenuation comparison 4 Terrestrial digital broadcasting BS-IF CS-IF 35 SN-5C-HFB SNT-5C-HFBE SNT-5C-HFBE-SSF 3 Attenuation [db/km] SN-7C-HFB SNT-7C-HFBE SNT-7C-HFBE-SSF Frequency [MHz] Electrical Characteristics Characteristic Impedance [Ω] Capacitance 1 khz [nf/km] Conductor Resistance 2 [Ω/km] Dielectric Withstand Voltage [ACV/min.] Insulation Resistance [MΩkm] Std. Attenuation 2 [db/km] 9MHz 77MHz 13MHz SN-5C-HFBE 75±3 5±3 max min SN-7C-HFBE 75±3 5±3 max min SNT-5C-HFBE 75±3 5±3 max min SNT-7C-HFBE 75±3 5±3 max min SN-5C-HFBE-SSF 75±3 5±3 max min SN-7C-HFBE-SSF 75±3 5±3 max min SNT-5C-HFBE-SSF 75±3 5±3 max min SNT-7C-HFBE-SSF 75±3 5±3 max min Order products 1

11 Eco coaxial cable EM-3D-2E EM-5D-2E EM-8D-2E EM-1D-2E EM-3C-2E EM-5C-2E High quality solid polyethylene or Low loss foamed polyethylene or highly foamed polyetnylene is adopted in insulation Good V.S.W.R. over wide wave range Flame retardant property satisfies JIS C35 flame retardant test(6 inclination) Compliance to RoHS Jacket (halogen free flame retardant polyethylene Black) Outer Conductor(annealed copper wire braid) (solid polyethylene) (annealed copper wire) 5Ω Interior wiring for radio communication Personal radio, MCA, AVM and amateur radio Wiring between or inside high frequency transmission equipment Interior wiring of ordinary housings 75Ω TV receivers and related equipment Interior wiring of ordinary housings Antenna feeder lines Wiring between or inside high frequency equipment EM-5D-FB EM-8D-FB EM-1D-FB EM-S-5C-FB EM-S-7C-FB Jacket (halogen free flame retardant polyethylene Black) EM-S-5C-HFL EM-S-7C-HFL EM-S-1C-HFL Jacket (halogen free flame retardant polyethylene Black) Outer Conductor 2(tinned annealed copper wire braid) Outer Conductor 1( laminated plastic tape) (foamed polyethylene) Outer Conductor(aluminum laminate tape) (highly foamed polyethylene) (annealed copper wire) (annealed copper wire) [Nos./mm] Outer Conductor 1 Outer Conductor 2 Tape Material [mm/nos.] [mm/nos.] EM-3D-2E 1/ /5/24 5.3±.5 45 EM-5D-2E 1/ /7/24 7.3±.5 75 EM-8D-2E 7/ /8/24 11.± EM-1D-2E 1/ /1/ ±.5 27 EM-5D-FB 1/ EM-8D-FB 1/ EM-1D-FB 1/ laminated plastic tape.14/6/16* 7.7±.3 78 laminated plastic tape.18/5/24 11.±.4 16 laminated plastic tape.2/7/ ±.5 23 EM-3C-2E 1/ /5/24 5.4±.5 46 EM-5C-2E 1/ /7/24 7.4±.5 7 EM-S-5C-FB 1/ EM-S-7C-FB 1/ laminated plastic tape.14/4/24* 7.7±.5 55 laminated plastic tape.18/5/24* 1.2±.5 97 EM-S-5C-HFL 1/ aluminum laminate tape 7.7±.3 57 EM-S-7C-HFL 1/ aluminum laminate tape 1.±.5 9 EM-S-1C-HFL 1/ aluminum laminate tape 12.9± *Braid structure : different pitch construction is available 11

12 Friendly to People, Nature and the Global Environment SHIKOKU's Eco Cables Environmentally friendly materials containing neither lead nor halogen are used. No toxic gases are generated even when the cable is burned. Materials that can be easily recycled are used. Electrical Characteristics Characteristic Impedance [Ω] Capacitance 1 khz [nf/km] Conductor Resistance 2 [Ω/km] Dielectric Withstand Voltage [ACV/min.] Insulation Resistance [MΩkm] EM-3D-2E 5±2 12±4 max min.1 EM-5D-2E 5±2 1±4 max min.1 EM-8D-2E 5±2 1±4 max min.1 EM-1D-2E 5±2 12±4 max min.1 EM-5D-FB 5±2 83±4 max min.1 EM-8D-FB 5±2 83±4 max min.1 Std. Attenuation [db/km] EM-1D-FB 5±2 84±4 max min.1 Please refer to the page of the PVC EM-3C-2E 75±3 67±3 max min.1 EM-5C-2E 75±3 67±3 max min.1 EM-S-5C-FB 75±3 55±3 max min.1 EM-S-7C-FB 75±3 55±3 max min.1 EM-S-5C-HFL 75±3 5±3 max min.1 EM-S-7C-HFL 75±3 5±3 max min.1 EM-S-1C-HFL 75±3 5±3 max min.1 12

13 Microphone Cord (Audio and Instrumintation Equipment) EM-MEES Unlikely to receive noise interference owing to high shield density EM type adopts Halogen free material which is friendly to environment, not to generate poisonous gases at the time of Jacket(Gray) burning and in fire (:PVC) Compliance to RoHS (EM-MEES:halogen free flame retardant polyethylene) Outer Conductor(tinned annealed copper wire braid) (4 colors :Black, White, Red, Green) Audio equipment and Measuring equipment Precautions for use: It is prohibited by law to use this cable besides small current circuits Please do not use for circuit exceeding 6V Size Conductor Dimensions [mm 2 ] Wires/Conductor dia. Stranding dia. Outer Conductor [mm/nos.] / /3/ EM-MEES / /3/ EM-MEES / /4/ EM-MEES / /4/16 6. EM-MEES / /3/ EM-MEES / /4/ EM-MEES / /4/ EM-MEES / /4/24* 6.5 EM-MEES / /3/ EM-MEES / /4/24* 6.2 EM-MEES / /4/24* 6.5 EM-MEES / /4/24* 7. EM-MEES / /3/ EM-MEES / /4/24* 7.4 EM-MEES / /5/24* 7.8 EM-MEES / /5/24* 8.4 EM-MEES / /3/ EM-MEES / /5/24* 8. EM-MEES / /5/24* 8.4 EM-MEES / /9/ EM-MEES 142 Order products *Braid structure : different pitch construction is available 13

14 Cable For Mobile Communications 5Ω 1.5D-2V 1.5DS-QEHV(TA) 2.5D-2V EM-1.5DS-QEHE RG-174/U M Jacket (Black) Outer Conductor (Braid) High quality solid polyethylene or Cross-linked polyethylene is adopted as insulator. QEHV type satisfies anti-soldering/ heat resistant property. QEHW type satisfies anti-soldering/heat resistant property and also anti-noise property (TA) specification corresponds to operating temperature range We can meet with various customers requirements including twin feeder specifications with electrical wire Compliance to RoHS Car navigation systems(gps) In-vehicle digital broadcasting receivers Inner wiring inside Communication and Electronic equipment such as cellular phone ETC Vehicle camera Electronic mirror 1.5DS-QEHW(TA) 1D-XB 1D-QFB(A) 1.5DS-QEHB 1.5DS-QFB S 2.5DS-QFB EM-1D-XBE EM-1D-QFBE(A) EM-1.5DS-QEHBE EM-1.5DS-QFBE S EM-2.5DS-QFBE Jacket (Black) Jacket (Black) Outer Conductor 2 (Braid) Outer Conductor 1 (Braid) Outer Conductor 2 (Braid) Outer Conductor 1 (tape) A:annealed copper wire TA:tinned annealed copper wire TCP:tinned copper cladded steel wire CP:copper cladded steel wire QE:crosslinked polyethylene QEF:closslinked and foamed polyethylene FRPE:halogen free flame retardant polyethylene [Nos./mm] Outer Conductor 1 Outer Conductor 2 Tape Material [mm/nos.] [mm/nos.] 1D-XB A 1/.3 QE 1.5±.1 AL tape TA.8/4/16 PVC 2.±.2 7 1D-QFB(A) TCP 1/.4 QEF 1.6±.1 AL tape TA.8/4/16 PVC 1.91± D-2V A 7/.18 QE 1.6±.2 A.1/5/16 PVC 2.9± DS-QEHV(TA) TA 7/.18 QE 1.6±.1 TA.1/5/16 PVC 3.1± DS-QEHB TA 7/.18 QE 1.6±.1 AL tape TA.1/5/16 PVC 3.± DS-QEHW(TA) TA 7/.18 QE 1.6±.1 TA.8/3/16 TA.8/3/16 PVC 3.4± DS-QFB S A 7/.2 QEF 1.6±.1 Cu tape TA.1/5/16 PVC 3.± D-2V A 1/.8 QE 2.7±.2 A.12/7/16 PVC 4.3± DS-QFB A 7/.32 QEF 2.7±.1 Cu tape TA.8/1/16 PVC 3.8±.2 23 EM-1D-XBE A 1/.3 QE1.5±.1 AL tape TA.8/4/16 FRPE 2.±.2 7 EM-1D-QFBE(A) TCP 1/.4 QEF 1.6±.1 AL tape TA.8/4/16 FRPE 2.±.2 9 EM-1.5DS-QEHE TA 7/.18 QE 1.6±.1 TA.1/5/16 FRPE 3.1±.2 15 EM-1.5DS-QEHBE TA 7/.18 QE 1.6±.1 AL tape TA.1/5/16 FRPE 3.±.2 14 EM-1.5DS-QFBE S A 7/.2 QEF 1.6±.1 Cu tape TA.1/5/16 FRPE 3.±.2 15 EM-2.5DS-QFBE A 7/.32 QEF 2.7±.1 Cu tape TA.8/1/16 FRPE 3.8±.2 23 RG-174/U M CP 7/.16 QE 1.52±.7 TA.1/4/16 PVC 2.55±

15 Cable For Mobile Communications Attenuation comparison GPS DSRC,ETC 45 1D-XB,EM-1D-XBE 4 RG-174/U M D-2V,1.5DS-QEHV(TA) 1.5DS-QEHW(TA),EM-1.5DS-QEHE Attenuation [db/km] D-QFB(A),EM-1D-QFBE(A) 1.5DS-QEHB,EM-1.5DS-QEHBE 1.5DS-QFB S,EM-1.5DS-QFBE S 2.5D-2V 2.5DS-QFB EM-2.5DS-QFBE Frequency [MHz] The example of connector ass'y SMA type SMB type SMB type MCX type MMCX type FAKRA type Electrical Characteristics Characteristic Impedance [Ω] Capacitance 1 khz [nf/km] Conductor Resistance 2 [Ω/km] Dielectric Withstand Voltage [ACV/min.] Insulation Resistance [MΩkm] Std. Attenuation 2 [db/km] 9MHz 24MHz 58MHz 1D-XB 5±4 11±4 max min (2282) (4121) 1D-QFB(A) 5±4(TDR) 85±3 max min.1 (88) (152) D-2V 5±2 14±5 max min.1 (91) (173) (335) 1.5DS-QEHV(TA) 5±2 14±5 max min.1 91 (173) (335) 1.5DS-QEHB 5±2 14±5 max min.1 73 (129) DS-QEHW(TA) 5±2 14±5 max min.1 91 (173) (335) 1.5DS-QFB S 5±2(TDR) 83±4 max min D-2V 5±2 1±5 max min.1 (526) (965) (173) 2.5DS-QFB 5±2(TDR) 86±4 max min EM-1D-XBE 5±4 11±4 max min (2282) (4121) EM-1D-QFBE(A) 5±4(TDR) 85±3 max min.1 (88) (152) 2535 EM-1.5DS-QEHE 5±2 14±5 max min.1 91 (173) (335) EM-1.5DS-QEHBE 5±2 14±5 max min.1 73 (129) 244 EM-1.5DS-QFBE S 5±2(TDR) 83±4 max min EM-2.5DS-QFBE 5±2(TDR) 86±4 max min RG-174/U M 5±2 approx.1 max min.1 (15) (1927) (366) 15

16 Cable For Mobile Communications 75Ω 1.5C-2V 2.5C-2V High quality solid polyethylene or Cross-linked polyethylene is adopted as insulation. QFB type is designed for anti-soldering/heat resistant, and for anti-noise properties We can meet with various customer s requirements including conposite type of cable like a twin feeder or with electrical wire. Compliance to RoHS Jacket (Black) TV/Radio/ Phone Receivers of cars/ships Inner wiring inside Communication and Electronic equipment Outer Conductor(Braid) 1.5CS-QFB(A) EM-1.5CS-QFBE(A) Jacket (Black) Outer Conductor 2(Braid) Outer Conductor 1(tape) A:annealed copper wire TA:tinned annealed copper wire CP:copper cladded steel wire PE:solid polyethylene QE:crosslinked polyethylene QEF:closslinked and foamed polyethylene FRPE:halogen free flame retardant polyethylene [Nos./mm] Outer Conductor 1 Outer Conductor 2 Tape Material [mm/nos.] [mm/nos.] 1.5C-2V CP1/.26 QE 1.6±.1 A.1/5/16 PVC 2.9± CS-QFB(A) TA 7/.127 QEF 1.68±.1 AL tape TA.1/5/16 PVC 3.± C-2V A 1/.4 PE 2.4±.1 A.12/6/16 PVC 4.±.2 26 EM-1.5CS-QFBE(A) TA 7/.127 QEF 1.68±.1 AL tape TA.1/5/16 FRPE3.±

17 Cable For Mobile Communications Attenuation comparison Terrestrial digital broadcasting 1.5C-2V 1.5CS-QFB(A) EM-1.5CS-QFBE(A) C-2V Attenuation [db/km] Frequency [MHz] The example of connector ass'y BNC type Small single head plug Electrical Characteristics Characteristic Impedance [Ω] Capacitance 1 khz [nf/km] Conductor Resistance 2 [Ω/km] Dielectric Withstand Voltage [ACV/min.] Insulation Resistance [MΩkm] Std. Attenuation 2 [db/km] 1MHz 3MHz 2MHz 1.5C-2V 75±3 69±4 max min CS-QFB(A) 75±3 53±4 max min.1 (8) (1) (275) 2.5C-2V 75±3 69±4 max min EM-1.5CS-QFBE(A) 75±3 53±4 max min.1 (8) (1) (275) 17

18 Cable For Mobile Communications GS GS.8D-216 GS.8D-1212 GS.8D-5211 Fluorocarbon resin which has excellent electrical and environmental property is applied in insulation. High heat resistant property The specification of GS sries cable is to improve attenuation property of braided coaxial cable Compliance to RoHS Inner wiring inside Communication and Electronic equipment such as Cellular phone TV/Radio/Phone Receivers of Cars/Ships Jacket (Black) Outer Conductor(Braid) GS.7D-5292 Jacket (Black) Outer Conductor 2(Bride) Outer Conductor 1(tape) SA:Silver plated anneald copper wire TA:tinned annealed copper wire CCS-T:tinned copper cladded steel wire CCS-S:silver plated copper clad steel wire [Nos./mm] Outer Conductor 1 Outer Conductor 2 Tape Material [mm/nos.] [mm/nos.] GS.7D-5292 SA 7/.8 FEP Cu tape TA.5/4/16 FEP GS.8D-5211 SA7/.12 FEP TA.8/3/16 ETFE GS.8D-216 CCS-T 1/.3 FEP.88±.5 TA.8/4/16 PVC 1.69±.1 6 GS.8D-1212 CCS-S 7/.12 FEP TA.8/3/16 FEP

19 Cable For Mobile Communications Attenuation comparison The example of connector ass'y Small surface mount coaxial connector MCX type FAKRA type Electrical Characteristics Characteristic Impedance [Ω] Capacitance 1 khz [nf/km] Conductor Resistance 2 [Ω/km] Dielectric Withstand Voltage [ACV/min.] Insulation Resistance [MΩkm] Std. Attenuation 2 [db/km] 1MHz 2MHz 3MHz GS.7D ±5 approx.97 max min GS.8D ±2 approx.95 max min GS.8D-216 5±2 approx.97 max min GS.8D ±2 approx.95 max min