Product Catalogue. Valid from June

Transcription

1 Product Catalogue Valid from June

2 Accessoires Our products and solutions support every stage of the alerting chain

3 Editorial About the Swissphone Group The Swissphone Group is the leading, internationally-operating supplier, that designs and produces secure and reliable paging solutions and resource management systems for public safety organizations (emergency services). Our systems comply with international standards. The market-leading Swissphone paging and communication solutions for emergency services have long ago become prevalent standards. Swissphone products are extremely popular due to the high quality of devices offered, as well as our extensive know-how and leading-edge experience in the design and construction of communication systems. In addition, Swissphone operates the Swiss national Telepage paging network, that is being used by most of the emergency services organizations for alerting. The reliable and secure Telepage network is also commonly used in sensitive industrial and commercial areas, as well as by private companies for their emergency response duties and in the field. Impressum Swissphone Wireless AG Faelmisstrasse 21 CH-8833 Samstagern Switzerland Tel.: Fax: The content of this brochure is furnished for informational use only, is subject to change, and should not be construed as a commitment by Swissphone Wireless AG. Swissphone was founded in 1969 by Helmut and Erika Köchler and it has been under Swiss ownership ever since. The company has a prominent market presence in Germany, Austria, France and in the USA. In addition, Swissphone possesses a dominant market position in northern European markets owing to its proficient partners. The corporate headquarters and the production site are located in Samstagern in Switzerland near Zurich.

4 Content Content Pagers 6 Overview 7 s.quad X15 10 s.quad X35 11 s.quad ATEX (analog or POCSAG) 12 s.quad ATEX (POCSAG) 12 s.quad Voice ATEX 12 s.quad Voice 13 HURRICANE DUO 14 RES.Q XS 15 RES.Q S 15 RES.Q M 15 RES.Q Overview 16 MS POCSAG 17 DiCal-ToM 17 IDEA Encryption 18 Message Text Enhancement 19 Efficient Fleet Management for Terminals 19 Member status/dispatch with RES.Q and s.one 20 s.one 21 R-Module Gateway 21 Emergency Call System for Lone Workers 22 SWISSPHONE TRIO 23 IBT Intelligent Beacon Transmitter 24 SWISSPHONE SOS-portal 25 Accessories 26 LG Standard, ALG Standard 26 LGRA Expert, ALGRA Expert, LiGRA Expert 27 LG s.quad 27 MLG s.quad 27 MLG Expert UNI, MLiG Expert UNI 27 MLG Expert LAN, MLiG Expert LAN 27 MLiG Accumulator 28 PG Set Expert 28 Programming Kit s.quad 28 Clips 28 Chain, Lanyard 29 Antennas 29 Leather Cases 29 USB-Adapter 29 Accessories RES.Q / SWISSPHONE TRIO 30 Paging Network Architecture 32 PNC 33 POCSAG Base Stations 34 ITC2100-BOS 34 I.SITE III Transmitter 35 I.SITE Plus Transmitter 35 I.SEARCH For critical Messaging and Alerting Solutions 36 I.SEARCH modular concept 37 I.SEARCH Base Units 38 Base Unit for 4W transmitter 38 Base Unit for 25W transmitter 38 Base Unit for 100W transmitter (external) 38 Base Unit Server PC 39 I.SEARCH Hardware Modules 39 AC 60W / DC 80W Power Supply 39 AC 150W / DC 175W Power Supply 39 Controller Module 39 Serial Interface Module (RS232) 40

5 Content Transmitter Control Module 40 Transmitter Module 4W 40 Transmitter Module 25W 41 Watchdog Module 41 LAN Module 41 GSM Module 42 DIO16 Interface Module (16 inputs / 16 outputs) 42 DIO7/8 Interface Module (7 inputs / 8 outputs) 42 Uninterruptable Power Supply UPS 42 POCSAG RX Module 42 Telephony Access Modules 43 Telephony Access Bundles (HW & SW) 43 I.SEARCH Software Modules 44 ISDN / PSTN Telephony Software Modules 44 High Availability Cluster 44 IDEA Encryption 44 Operation Management 45 I.SEARCH External Devices / Accessories 47 Monitoring MS POCSAG + SW-Modul 47 Transmitters (100W) 47 I.SITE II Transmitter Interface Module 47 Intelligent Beacon Transmitter (indoor solution) 48 I.SITE II Transmitter 48 I.SITE III Transmitter 49 UPS as an external Solution 49 Digital Inputs over IP 50 Multicharger (Absence Management) 50 Accessories 50 DiCal-FDM Wireless data systems 52 DiCal-FDM.X 53 DiCal-FDM3 53 DiCal-RED 53 erix Communication system 54 erix.compact /.advanced /.command 55 Message Confirmation 45 Escalation Management 45 Absence Management 45 Pager Time Synchronisation 45 Dictionary for Text to Speech Pager 45 Automatic Data Replication 46 Simple Multi-Client Capability 46 MIP11 Plus Interface 46 ESPA TAP Interface 46 TMIP Interface 46 Tetra PEI Interface IN/OUT 47 SNMP 47

6 Pagers Be it digital or analogue or by text or voice message: We reliably alert you We offer a wide range of powerful and robust pagers. They enable digital or analogue alerting, offer one-way or two-way communication and provide information in text or voice messages. All of our pagers feature above average reception performance, robust characteristics and intuitive operation. With reception sensitivity of less than 2.5 µv/m, our new s.quad is the best in its class. The RES.Q combines paging and GSM as well as optional GPS in one device. Thanks to its response option, the RES.Q guarantees efficient resource management. Our HURRICANE DUO offers alerting with text and speech messages in one device. It reads text messages to the user in easy-to-understand language. Our s.quad ATEX is specifically designed for use in zones that require explosion-protected end devices that are tailored to industry and petrochemistry requirements. All of our pagers guarantee quick and reliable alerting. With the patented Express-Alarm feature, the dispatch can compile task group RIC addresses and link the alert texts accordingly. Instead of each RIC address being notified one at a time, the alert text is sent simultaneously to all needed users. Less data allows for faster transmission time, which is a fraction of that time when several individual messages are sent. Wide PLL: The reception frequency can be programmed within a Bandwidth of up to 10 MHz. The IDEA Encryption Technology employed by Swissphone allows secure transmission of confidential messages. All messages are secured from the dispatch to the pager (end-to-end) which means that messages can only be read by authorised pagers. The 128-bit protection key delivers one of the highest levels of security currently available. eco mode In idle state, the pager is set in a sleep mode and the display is switched off. Of course, the pager remains active and ready to receive alarm signals. An ATEX device is approved for use in areas with easily ignitable gas-air mixtures and is thus tailor-made for the needs of the chemical and oil industries. This robust, compact pager is ideal for those working in such dangerous environments and need to be on call at all times. Even in the most sensitive zones, the pager can be used without risk thanks to its passive RF reception characteristic and protection devices. 6 Product Catalogue 2016

7 Pagers GLOB is a replace text pattern option that allows you to either suppress text or replace it with constant text. Bluetooth technology makes it possible to connect the s.quad with a compatible smartphone and ultimately with various s.one software solutions from Swissphone. This includes, among other things, the display of the availability of the emergency services and the resources as well as the strength of the team. Hybrid combines the reliability of a paging alert with the benefits of commercial mobile telecommunications networks. The alert message is sent to the pager via paging and SMS/GPRS. Only the fastest of the alert messages is displayed on the pager screen and the other is suppressed. The paging comes into play if the public network fails and ensures alerting. Pager Overview Frequency Band description Band Frequency Band [MHz] 4 m UB m MB m OB m BOS m UUB m UB m MB m OB UHF A/B UHF B/C UHF C/D UHF D/E UHF E/F UHF F/G UHF G/H mm Original size (81 x 64 x 22 mm) 78 mm 80 mm 64 mm Compliance Norms ETSI EN , TR-BOS DME II EN (shock) EN (vibration) EN (drop test) EN 60529: A1: mm 53 mm Original size (78 x 53 x 24 mm) Original size (80 x 53 x 24 mm) Product Catalogue

8 Pagers s.quad X15 s.quad X35 s.quad Voice s.quad ATEX s.quad Voice ATEX Paging Text Speech 2-way Optional Optional Optional Frequency Bands VHF 2 m UHF E/F G/H VHF 2 m UHF E/F G/H VHF 2/4 m BOS UHF E/F G/H VHF 2 m UHF E/F G/H VHF 2 m UHF E/F G/H Channel Spacing [khz] 12.5 / 20/ / 20/ / 20/ / 20/ / 20/25 512B [µv/m] < 2.0 < 2.0 < 2.0 < 2.0 < 2.0 Frequency processing Wide PLL Wide PLL Wide PLL Wide PLL Wide PLL Addresses 16 (64) 64 (256) (256) 64 (RIC incl. subaddresses) Frame independent Alerting 30 cm distance > 95 db (A) > 95 db (A) > 95 db (A) > 95 db (A) > 95 db (A) Alert profiles 3 select- or toggle profiles 64 select- or toggle profiles 64 select- or toggle profiles 64 select- or toggle profiles 64 select- or toggle profiles Vibrator Light Backlight Alert LED Backlight multi-colour Alert LED Backlight multi-colour Alert LED Backlight multi-colour Alert LED Backlight multi-colour Alert LED Display Resolution 146x128 HighRes full graphic* 146x128 HighRes full graphic* 146x128 HighRes full graphic* 146x128 HighRes full graphic* 146x128 HighRes full graphic* Messages Message memory > 100 (8k) > 100 (8k) up to 16 min > 100 (8k) up to 16 min Time stamp Pre-programmed messages 64 x 32 char 256 x 32 char 256 x 32 char 256 x 32 char 256 x 32 char Message folder/storage Message printing Power management Battery type AA AA AA AA / AAA 1) AA Operating time dry cell regular / ECO mode [h] 700 / / / / / 160 Operating time NiMH regular / ECO mode [h] 700 / / / / / 160 Operating time LiPo 480 mah Operating time LiPo 1230 mah Miscellaneous Express Alarm On-air programming Option IDEA TM Encryption Option multi channel scanner scanner scanner scanner ATEX IP protection IP67 IP67 IP67 IP67 IP67 Accessories Various Various Various Various Various 1) Rechargeable Battery 2) With leather case 3) Proportional characters 4) Please refer to page 17 * Several different font size (6, 7, 8 lines) 8 Product Catalogue 2016

9 Pagers RES.Q HURRICANE DUO MS POCSAG DiCal-ToM Paging Text Speech 2-way Positioning (GPS) Frequency Bands VHF 2/4 m UHF E/F G/H VHF 2 m UHF G/H VHF 2 m UHF E/F G/H VHF 2 m UHF E/F G/H Channel Spacing [khz] 12.5 / 20/ / 20/ / 20/ / 20/25 512B [µv/m] < 3.0 < 3.0 N.A. 4) N.A. 4) Frequency processing VHF: Wide PLL UHF: PLL ± 1.0 MHz VHF: Wide PLL UHF: PLL ± 1.0 MHz VHF: PLL ± 0.5 MHz UHF: Wide PLL VHF: PLL ± 0.5 MHz UHF: Wide PLL Addresses 32 (128) 64 (256) 32 (128) 32 (128) (RIC incl. subaddresses) Frame independent Alerting 30 cm distance > 88 db (A) > 85 db (A) N.A. > 90 db (A) Alert profiles 64 select- or toggle profiles 64 select- or toggle profiles 64 select- or toggle profiles Vibrator N.A. Light Backlight Backlight Alert LED N.A. Backlight Display Lines x character per line 3x16, 4x20, 5x21 full graphic 3x11, 5x16 3) full graphic N.A. 7" colour Touchscreen Messages Message memory > 100 (8k) > 100 (8k) > 100 (8k) 64 Time stamp Pre-programmed messages 128 x 32 char 128 x 32 char 128 x 32 char 5 x 16, 6 x18, 9 x 28 char Message folder/storage Message printing Power management Battery type Lithium-polymer AA 4) 4) Operating time dry cell regular / ECO mode [h] 600 Operating time NiMH regular / ECO mode [h] 600 Operating time LiPo 480 mah 500 Operating time LiPo 1230 mah 1300 Miscellaneous Express Alarm On-air programming Option IDEA TM Encryption Option multi channel scanner scanner N.A. N.A. ATEX IP protection IP52 / IP54 2) IP54 Accessories Various Various Printer (optional) Product Catalogue

10 Pagers s.quad X15 Excellent reception Switching bandwidth programmable up to 10 MHz (VHF), 20 MHz (UHF) 16 addresses (RICs) with four sub-addresses each (64 individual addresses) Three selection and switching profiles possible Alerting volume > 95 db(a) at 30 cm distance Fully graphic, high-resolution display for over 200 characters per page Extremely robust (2-m drop test) and waterproof (IP67) Optional: IDEA message encryption (128 bit) Bluetooth interface eco mode Frequency Bands VHF 2m / UHF Channel Spacing 12.5 khz or 20/25 khz Baudrate 512/1200/2400 Frequency Processing VHF Wide PLL: ( MHz, MHz, MHz) UHF Wide PLL: ( MHz, MHz) Addresses 16 RIC (64 addresses) Power management AA battery, dry cell 1.5 V or NiMH 1.2 V charger interface Operating time dry cell: 2500 h NiMH: 2400 h Languages Czech, Danish, Dutch, English, French, German, Italian, Polish, Slovenian, Swedish, others upon request Options Express-Alarm, On-air programming (OAP), IDEA Encryption Band Channel Spacing 2 m UUB 12.5 khz m UB 12.5 khz m MB 12.5 khz m OB 12.5 khz UHF E/F 12.5 khz UHF G/H 12.5 khz additional frequencies upon request Band Channel Spacing 2 m UUB 20/25 khz m UB 20/25 khz m MB 20/25 khz m OB 20/25 khz UHF E/F 20/25 khz UHF G/H 20/25 khz Product Catalogue 2016

11 Pagers eco mode s.quad X35 Excellent reception Switching bandwidth programmable up to 10 MHz (VHF), 20 MHz (UHF) 64 addresses (RICs) with four sub-addresses each (256 individual addresses) 64 selection and switching profiles possible Alerting volume > 95 db(a) at 30 cm distance Multi-coloured alarm LED Five-level display of signal strength (RSSI) Fully graphic, high-resolution display for over 200 characters per page Extremely robust (2-m drop test) and waterproof (IP67) Optional: IDEA message encryption (128 bit) Optional: Multi-channel/scanner in one device Bluetooth interface Frequency Bands VHF 2m / UHF Channel Spacing 12.5 khz or 20/25 khz Baudrate 512/1200/2400 Frequency Processing VHF Wide PLL: ( MHz, MHz, MHz, MHz) UHF Wide PLL: ( MHz, MHz) Addresses 64 RIC (256 addresses) Power management AA battery, dry cell 1.5 V or NiMH 1.2 V charger interface Operating time dry cell: 2500 h NiMH: 2400 h Languages Czech, Danish, Dutch, English, French, German, Italian, Polish, Slovenian, Swedish, others upon request Options Express-Alarm, On-air programming (OAP), IDEA Encryption, multi channel/scanner Band Channel Spacing 2 m UUB 12.5 khz m UB 12.5 khz m MB 12.5 khz m OB 12.5 khz UHF E/F 12.5 khz UHF G/H 12.5 khz additional frequencies upon request Band Channel Spacing 2 m UUB 20/25 khz m UB 20/25 khz m MB 20/25 khz m OB 20/25 khz UHF E/F 20/25 khz UHF G/H 20/25 khz Product Catalogue

12 Pagers eco mode s.quad ATEX (analogue or POCSAG) Excellent reception Switching bandwidth programmable up to 10 MHz (VHF), 20 MHz (UHF) 64 addresses (RICs) with four sub-addresses each (256 individual addresses) 64 selection and switching profiles possible Alerting volume > 95 db(a) at 30 cm distance Multi-coloured alarm LED Five-level display of signal strength (RSSI) Fully graphic, high-resolution display for over 200 characters per page Extremely robust (2-m drop test) and waterproof (IP67) Optional: IDEA message encryption (128 bit) Optional: Multi-channel/scanner in one device Available for POCSAG or analog (s.quad Voice ATEX) Frequency Bands VHF 2m / UHF Channel Spacing 12.5 khz or 20/25 khz Baudrate 512/1200/2400 Frequency Processing VHF Wide PLL: ( MHz, MHz, MHz, MHz) UHF Wide PLL: ( MHz, MHz) Addresses 64 RIC (256 addresses) Power management AA battery, dry cell 1.5 V or NiMH plus battery (AAA) charger interface Operating time dry cell: 2100 h NiMH: 1000 h Languages Czech, Danish, Dutch, English, French, German, Italian, Polish, Slovenian, Swedish, others upon request Options Express-Alarm, On-air programming (OAP), IDEA Encryption, multi channel/scanner s.quad ATEX (POCSAG) Band Channel Spacing 4 m OB 12.5 khz m UUB 12.5 khz m UB 12.5 khz m MB 12.5 khz m OB 12.5 khz UHF E/F 12.5 khz UHF G/H 12.5 khz additional frequencies upon request Band Channel Spacing 4 m OB 20/25 khz m UUB 20/25 khz m UB 20/25 khz m MB 20/25 khz m OB 20/25 khz UHF E/F 20/25 khz UHF G/H 20/25 khz s.quad Voice ATEX (analogue) eco mode Band Channel Spacing 2 m UUB 12.5 khz m UB 12.5 khz m MB 12.5 khz m OB 12.5 khz UHF E/F 12.5 khz UHF G/H 12.5 khz additional frequencies upon request Band Channel Spacing 4 m BOS 20/25 khz m UUB 20/25 khz m UB 20/25 khz m MB 20/25 khz m OB 20/25 khz UHF E/F 20/25 khz UHF G/H 20/25 khz Product Catalogue 2016

13 Pagers The s.quad ATEX is approved for use in areas with easily ignitable gas-air mixtures and is thus tailor-made for the needs of the chemical and oil industries. This robust, compact pager is ideal for those working in such dangerous environments and need to be on call at all times. Even in the most sensitive zones, the pager can be used without risk thanks to its passive RF reception characteristic and protection devices. II 2G Ex ib IIC T4 II Device group all areas except mining (Group I) 2 Device category for use in zones 1 and 2 G Area of application Indicator of atmosphere type (G=gas) Ex Ex-standard certified explosion protection in accordance with standard EN 50014, ib Type of protection against ignition limited energy level prevents ignition of the atmosphere IIC Explosion group CENELEC reference, highest classification in this explosion group, typical gas: Hydrogen (ignition energy < 60μJ) T4 Temperature class maximum permitted temperature of equipment casing or any component: 135 C eco mode s.quad Voice Excellent reception Switching bandwidth programmable up to 10 MHz (VHF) 64 addresses / 64 selection and switching profiles possible Alerting volume > 95 db(a) at 30 cm distance Fully graphic, high-resolution display (for message display via Bluetooth) Extremely robust (2-m drop test) and waterproof (IP67) Up to 16 minutes stored voice Optional: Multi-channel/scanner in one device Bluetooth interface Frequency Bands Channel Spacing Frequency Processing Addresses Power management Operating time Languages VHF 2m, 4m BOS / UHF 12.5 khz or 20/25 khz VHF Wide PLL: (84-87 MHz) VHF Wide PLL: ( MHz, MHz, MHz, MHz) UHF Wide PLL: ( MHz, MHz) 64 addresses AA battery, dry cell 1.5 V or NiMH 1.2 V charger interface dry cell: 160 h NiMH: 160 h Czech, Danish, Dutch, English, French, German, Italian, Polish, Slovenian, Swedish, others upon request Band Channel Spacing 2 m UB 12.5 khz m MB 12.5 khz m OB 12.5 khz UHF E/F 12.5 khz UHF G/H 12.5 khz additional frequencies upon request Band Channel Spacing 4 m BOS 20/25 khz m UB 20/25 khz m MB 20/25 khz m OB 20/25 khz UHF E/F 20/25 khz UHF G/H 20/25 khz Product Catalogue

14 Pagers HURRICANE DUO Digital Pager with Text and Speech full graphic LC-Display 64 RIC with up to 4 sub-addresses each (256 independent adresses) 64 select- or toggle-profiles 256 RIC names with eight characters received signal indication (RSSI) simple 2-button operation Charger interface Volume > cm eco mode Frequency Bands VHF 2m / UHF Channel Spacing 12.5 khz or 20/25 khz Baudrate 512/1200/2400 Frequency Processing VHF Wide PLL: ( MHz, MHz, MHz) UHF PLL: (± 1.0 MHz) Addresses 64 RIC (256 subaddresses) Power management type AA battery, dry cell 1.5 V or NiMH 1.2 V charger interface Operating time dry cell: 600 h NiMH: 600 h Languages Czech, Danish, Dutch, English, French, German, Italian, Slovenian, Swedish, others upon request Available Voices Arabic (f/m), Belgian (f), Danish (f), German (f/m), English UK (f/m), for Speech output English US (f/m), Finnish (f), French(f/m), Italian (f/m), Dutch (f/m), Norwegian (f/m), Polish (f), Portuguese (f), Swedish (f/m), Spanish (f/m), Czech (f) Options Express-Alarm, On-air programming (OAP), IDEA Encryption, multi channel Band Channel Spacing 2 m UB 12.5 khz m MB 12.5 khz m OB 12.5 khz UHF G/H 12.5 khz additional frequencies upon request Band Channel Spacing 2 m UB 20/25 khz m MB 20/25 khz m OB 20/25 khz UHF G/H 20/25 khz Product Catalogue 2016

15 Pagers RES.Q XS RES.Q S RES.Q M Alerting and Confirmation Alerting, Confirmation and Localisation Alerting, Confirmation, Localisation and Emergency Button full graphic LC-Display 32 RIC with up to four sub-addresses each (128 independent addresses) 64 select- or toggle-profiles simple 3-button operation Charger interface GSM for confirmation, ressource management and fallback alerting 2) Option: GPS module for location information eco mode POCSAG Frequency bands VHF 2/4 m / FFSK available 1) / UHF Channel spacing 12.5 khz or 20/25 khz Baudrate 512/1200/2400 Frequency Processing VHF Wide PLL: ( MHz, MHz, MHz) UHF PLL: (± 1.0 MHz) Addresses 32 RIC (128 subaddresses) Power management Lithium polymer rechargeable battery (LiPo) 480 mah Operating time POCSAG only up to 500 h POCSAG/GSM up to 300 h POCSAG/GSM/GPS up to 200 h Languages Danish, Dutch, English, French, German, Italian, Swedish, Czech, Polish, Slovenian, others on request Options Express-Alarm, IDEA Encryption, multi channel/scanner GSM Frequency ranges Connection Dual Band 900 MHz (GSM 900 & E-GSM) 1800 MHz (DCS-1800, GSM-1800) SMS, GPRS class 10, operation mode class B GPS Frequency ranges MHz Sensitivity -162 dbm (in tracking mode) Current time and date Synchronisation UTC using GPS Channels 50 GALILEO ready yes 1) Plaese contact Swissphone for FFSK order numbers 2) Please contact Swissphone for system integration services Product Catalogue

16 Pagers RES.Q Overview RES.Q XS RES.Q S RES.Q M DE955w-G DE955w-GP POCSAG IDEA encryption POCSAG RSSI Multi channel Express Alert Turbo paging Geo-Alert GSM Message feedback Re-confirmation Operational status Localisation GPS A-GPS GPS Tracking GSM cell info Remote access OAP commands OAP query Remote monitoring Safety SOS button Emergency call test Emergency call protocol = optional RES.Q XS Band Channel Spacing 4 m OB 12.5 khz m UB 12.5 khz m MB 12.5 khz m OB 12.5 khz UHF E/F 12.5 khz UHF G/H 12.5 khz Band Channel Spacing 4 m OB 20/25 khz m UB 20/25 khz m MB 20/25 khz m OB 20/25 khz UHF E/F 20/25 khz UHF G/H 20/25 khz RES.Q S Band Channel Spacing 4 m OB 12.5 khz m UB 12.5 khz m MB 12.5 khz m OB 12.5 khz UHF E/F 12.5 khz UHF G/H 12.5 khz Band Channel Spacing 4 m OB 20/25 khz m UB 20/25 khz m MB 20/25 khz m OB 20/25 khz UHF E/F 20/25 khz UHF G/H 20/25 khz RES.Q M Band Channel Spacing 4 m OB 12.5 khz m UB 12.5 khz m MB 12.5 khz m OB 12.5 khz UHF E/F 12.5 khz UHF G/H 12.5 khz Band Channel Spacing 4 m OB 20/25 khz m UB 20/25 khz m MB 20/25 khz m OB 20/25 khz UHF E/F 20/25 khz UHF G/H 20/25 khz Product Catalogue 2016

17 Pagers MS POCSAG Digital Receiver Module Serial or LAN interface for message and raw data outputs Entire address range or 128 sub-ranges can be evaluated 6 individually programmable digital outputs Absolute level measurement (RSSI in dbm) MS POCSAG USB RS232 MS POCSAG LAN Compliants EN Power management Input voltage: 5 VDC power supply plug 512 Bit/s VHF: -117 dbm UHF: Bit/s VHF: -116 dbm UHF: Bit/s VHF: -115 dbm UHF: -119 dbm Level measurement (RSSI) From -48 dbm (max.) to -105 dbm (min. accuracy ± 5 db) Options Express-Alarm, IDEA Encryption, Turbo paging, On-air Programming Size 46 x 107 x 198 mm POCSAG Frequency bands VHF 2 m ( MHz, MHz, MHz) UHF ( MHz, MHz) Channel spacing 12.5 khz or 20/25 khz Baudrate 512/1200/2400 Frequency Processing VHF PLL: (± 0.5 MHz) UHF Wide PLL: (± 10 MHz) Addresses 32 RIC (128 subaddresses) Pager Monitor As a free of cost option, you can use Pager Monitor with our MS POCSAG. Pager Monitor supports both the USB and the LAN Version. Pager Monitor will by default log messages received to the file system as text fieles. The logging system is very flexible. Our Application Engineering will happily support you with your logging needs. Possible logging targets are e.g. SQL-Databases or Syslog. Soon utilizing Pager Monitor without a GUI (as a windows service) will be supported. MS POCSAG LAN MS POCSAG USB RS232 I/O MS POCSAG USB RS DiCal-ToM Monitor Receiver with 7"-Touch Display 7" colour-touchscreen; Resolution 800 x 480 pixel Display of alert messages with 5 x 16 / 6 x 18 und 9 x 28 characters and full-screen dynamically up to 240 characters Operation as text scrolling, browsing, storing, deleting, printing via touch-screen automatic printing of alert message via designated ink-jet- resp. laser-printers with USB-interface; in addition manually via print-button, multi-copy configurable Playback of audio files (MP3) via built-in speaker Line-audio-output for e.g. external P.A.-systems Relais-output, switching time configurable 32 RIC-areas, more than 1 Mio. RICs IDEA TM encryption 128 bit (optional) Express-Alarm, Turbo Paging, On Air Programming Frequency Bands: Frequency Processing: Channelspacing: Baudrate: Adresses: Temperatur range: VHF / UHF VHF PLL (+/- 0.5 MHz) UHF Wide PLL (+/ MHz) 12.5/20/25 khz 512/1200/2400 Baud 32 RICs (128 subaddresses) 0-70 C DiCal-ToM 2M-UB 20 khz DiCal-ToM 2M-UB 12.5 khz DiCal-ToM 2M-MB 20 khz DiCal-ToM 2M-MB 12.5 khz DiCal-ToM 2M-OB 20 khz DiCal-ToM 2M-OB 12.5 khz DiCal-ToM UHF E/F 25 khz DiCal-ToM UHF E/F 12.5 khz DiCal-ToM UHF G/H 25 khz DiCal-ToM UHF G/H 12.5 khz Product Catalogue

18 Pagers IDEA Encryption Secure Paging IDEA Facts: Encoded messages from input to pager (end-to-end) Secure against subsequent replaying of alerting messages (time authentication) Integration into the existing environment Clever code management Swissphone IDEA encodes alerting messages so that eavesdroppers or hackers cannot read it but that authorized parties can. Thus, Swissphone digital alerting is not just fast but secure as well. Secure paging Swissphone IDEA encryption is an option to all of our digital paging systems, and guarantees absolute confidentiality. All messages are encoded starting from their input all the way to the receiving pagers. Swissphone IDEA allows shorter transmission times and requires less memory as the AES standard, but provides the same security. Confidential information Mission orders issued by security or emergency services often contain confidential information. Whenever this type of sensitive information is communicated, it must be protected from external interference to the highest possible degree. This particularly applies to paging, a technology that is now indispensable in alarm systems. Clever code management Security cannot be achieved from a good lock alone it is also important that only a few people have the keys and that these are also kept suitably secure. The keys should be periodically changed to maintain security. Swissphone has developed a clever code management system for this purpose, making it possible to change codes securely via the wireless interface. It is not necessary to bring the pager back in to change the codes, and even if the pager gets lost, the codes still cannot be read. Integration into existing environments IDEA secure paging from Swissphone is easy to integrate into an existing environment. Swissphone will assist any project with the integration of IDEA secure paging. Alarm input terminals Secure Access Network Paging Network Controller (Redundant) Distribution Network Radio Network Terminals Emergency centre Working place Secure IP Network Telephone WAN/LAN GSM/UMTS/LTE Microwave link PNC Server IP Network Wire Radio Satellite Base station POCSAG Pager First responder Applies to s.quad, HURRICANE DUO, RES.Q, MS POCSAG, SWISSPHONE TRIO Product Catalogue 2016

19 Pagers Message Text Enhancement Talking with you / our customers, we have heard the following concern: My Message text contains things that distract me, couldn t you possibly suppress them? Examples of such unwanted and to the end user distracting text items might be: Incident Numbers Timestamps Error Codes GPS Positions The data above is there for a reason: Incident Number is useful for later reference, Timestamp may be sent out to receiver without timestamp functionality and GPS Position data can be used to guide vehicles to the incident. But many of the average users might be distracted by the elaborate data. To alleviate this issue we built the Replace Text Pattern option. The Replace Text Pattern option allows you to search for text inside the message text that conforms to certain formatting rules: e.g. Timestamp: ##:## (meaning two digits followed by a : followed by two digits). It is now possible to either suppress text that looks like this completely, or replace it with some constant text (e.g. TS for timestamps). To only match timestamps at the beginning of the message the search pattern would be <##:##. Messages get stored in the pager as they were sent, and messages that where edited using this option are prepended with an inverted asterisk. The original messages may be read out of the pager using service software. Efficient Fleet Management for Terminals Swissphone Terminal Update Tool (shorthand TUT) offers a tool for efficient and convenient configuration of terminal fleets, both small and large. Imagine you have 20 RES.Q pagers on stock. Before delivering them to the end user you would like to: Update the Firmware Set Network-Parameters (such as reception Frequency and baud rate) in all terminals Individualize the terminals with RIC s, Profiles etc. Typically you use Terminal Flasher, PSWplus and the document describing how to individualize each device. Using Terminal Update Tool, the configuration process can be streamlined: First, create a base configuration and select it in the user interface. Second, select the desired firmware and list how to individualize each device. Then, you simply press start and all you have to do is plug the terminals into the programmer and wait for the green arrow showing when TUT is ready for the next terminal. TUT is flexible, allowing you also to program only a base configuration or a new firmware. Additionally, you can set up your TUT with multiple programming cradles. One to eight cradles can easily be handled by a normal Laptop computer. This allows you to scale from small fleets managing tens of terminals to fleets including hundreds or even thousands of terminals. You can use normal Programming Set PG Set Expert as a programming cradle. The included USB to RS232 adapter cable allows you to connect up to 4 cradles to most Laptops easily. When deciding how many cradles you want, please keep in mind the following: if you use 8 cradles and do firmware update plus configuration, on average about every 15 seconds a terminal will be finished! Supported Terminals: s.quad RES.Q HURRICANE DUO CD Software Terminal Update Tool Product Catalogue

20 Member status/dispatch with RES.Q and s.one For certified partners only. Dispatch your forces simply and efficiently during active operations and normal day-to-day business using s.one and RES.Q. By pressing a button on their RES.Q terminal, each force confirms whether they can take part in the operation or not and how quickly they can arrive. Between operations, the forces can schedule their availability or vehicle assignment by simply changing their profile on the RES.Q. You are therefore always one step ahead of any possible incident and you can request more forces in a targeted way, within a few seconds, should they be needed. Furthermore, the automatic statistics function makes it possible to track alert cycles at any time and, for example, display the day s alert availability. Several information options are available that make it possible to access the required information at any time and anywhere. At the station, all forces read the data from a large screen. Forces that are already on the way to the incident retrieve the information on an Android or ios app or they are sent a summary via SMS or information paging. Statistical analyses are generated conveniently from the workstation and are stored or forwarded as an XML file. Dispatching Availability Master data Statistic C&C Centre POCSAG RES.Q Pager GSM GPRS / SMS s.one Server SOAP Webservices Display App SMS Info-paging 20 Product Catalogue 2016

21 Member status/dispatch s.one Online platform for the targeted implementation s.one is designed for quick, targeted alerting The various functions of the new Swissphone platform enable quick and targeted alerting. For example, operations directors can view the availability of relief forces or the effective strength of teams and groups on a smartphone or display screen and then alert as necessary. The s.one modules can be combined with one another in any way, meaning it is possible to start with a simple solution and use other modules to expand it into a complete alerting solution. s.one resources display how many relief forces are available at the current time. The operations director can call up the relevant list on the screen or smartphone app. The available relief forces are then displayed with a green bar and those that are not available are displayed with a red bar. The s.one monitor displays on the screen how many of the summoned relief forces have acknowledged the alert with I m coming or I m not coming or are travelling to the scene of the incident. The engaged relief forces are then displayed with a green bar and those that are not available are displayed with a red bar. If the operations director plans a certain number of relief forces for a large fire, he will be able to view on the s.one platform if he has achieved his target and how many fire brigade relief forces, paramedics or members of traffic control are ready for deployment. This way, he can quickly and easily re-alert the right personnel depending on need. The scene of the incident is displayed on a geographic map. Advantages: Simple system due to the use of a standard PC with internet access Intuitive display of confirmations in the event of an alert and availability for dispatch Flexible use via PC, smartphone, tablet, text and information paging Redundant return channel due to use of cellular data Hardware: - Software: s.one-platform-account, activation of commercial account (subscription usage fee not included) s.one monitor Base s.one monitor Advanced s.one resources Base s.one resources Advanced on request on request on request on request R-Module Gateway Online platform for managing and dispatching forces in the event of an alert. Prepared for integrating into other peripheral systems via Web services (SOAP) Advantages: Confirmations from the devices are already prepared in useable format Simple implementation in peripheral systems by accessing Web services (SOAP) Hardware: - Software: - R-Module gateway activation R-Module gateway operation (license per year) RES.Q activation (per device) RES.Q operation (license per year / per device) Data conversion (per device) Product Catalogue

22 Emergency Call System for Lone Workers For certified partners only As an employer you are required by law to ensure lone workers safety. While some dangerous jobs can be performed by a loneworker, employers must guarantee rapid response to an emergency. This means that you need a system that monitors lone workers in dangerous places and will automatically and independently call for help in case of an emergency. The Swissphone Emergency Call System consists of emergency devices e.g. the SWISSPHONE TRIO, positioning sender and a user-friendly web portal. ET Lone worker Emergency call trigger Alert reception Help & Rescue Lone worker fully protected Emergency button In-house control centre First Aid in-house Fall detection SWISSPHONE TRIO user SWISSPHONE TRIO Lone worker safety device man down detection Professional control centre Rescue Autonomous-Lifecheck Mobile user Remote-Lifecheck 22 Product Catalogue 2016

23 SWISSPHONE TRIO Manual alerting function: - Emergency button Automatic alerting functions: - Fall detection - Man down detection - Autonomous-Lifecheck - Remote-Lifecheck Emergency Call System Position determination: - Outdoor (GPS) 1) - Indoor (position transmitter) 1) - Onsite (combination of both) Emergency call transmission via GSM: GPRS or SMS Message reception via POCSAG False alert prevention: mechanical key protection; pre-alert ET Power management Languages Dimensions (H x W x D) Weight (incl. battery) GSM Frequency ranges Connection Lithium polymer rechargeable battery (LiPo) Danish, Dutch, English, French, German, Italian, Slovenian, Swedish, others on request 80 x 53 x 24 mm 110 g Dual band 900 MHz (GSM 900 & E-GSM) 1800 MHz (DCS-1800, GSM-1800) SMS, GPRS class 10, operation mode class B GPS Frequency ranges MHz Sensitivity -160 dbm (in tracking mode) Current time and date Synchronisation UTC using GPS Channels 50 POCSAG Frequency bands VHF 2/4 m 2) UHF 2) Channel spacing 12.5 khz or 20/25 khz Baudrate 512/1200/2400 Addresses 32 RIC (128 subaddresses) For indoor (beacon) and/or outdoor (GPS) localisation Band Channel Spacing Band Channel Spacing 4 m OB 20/25 khz m UB 20/25 khz m MB 20/25 khz m OB 20/25 khz UHF E/F 3) 12.5 khz UHF G/H 3) 12.5 khz For outdoor (GPS) localisation Band Channel Spacing UHF E/F 12.5 khz UHF G/H 12.5 khz UHF E/F 3) 20/25 khz UHF G/H 3) 20/25 khz Band Channel Spacing UHF E/F 20/25 khz UHF G/H 20/25 khz Add-on services for SWISSPHONE TRIO SWISSPHONE TRIO add-on software Connected SWISSPHONE TRIO add-on software BGR SWISSPHONE TRIO Accessories For more information, see chapter Accessories 1) In combination with indoor localisation system IBT10, IBT20 or IBT25 only 2) Additional frequencies upon request 3) Not for use with national POCSAG network Product Catalogue

24 Emergency Call System IBT Intelligent Beacon Transmitter The IBT10 remains in operation even during a power failure thanks to its two internal backup batteries. They are charged by the mains adapter. The IBT20 is fed via USB with power and data. It will be connected and controlled directly to a computer. Therefore it is ideal to check the functionality of pagers. The IBT25 is connected to an alarm server (e.g. I.SEARCH) and configured via LAN. It receives messages and transmits them via POCSAG. All status information of the IBT25 can be accessed via the alarm server. Information about the exact location of an injured person is vital for rapid response. Outdoor localization is managed via GPS. In case there is no GPS signal available, stationary position transmitters take on this function. Position transmitters can be placed in buildings, tunnels and factories. They transmit their position to the SWISSPHONE TRIO cyclically. In case of an emergency the latest position received from a position transmitter will be sent to the control centre to exactly locate the injured person. IBT10 IBT20 IBT25 Comparison Backup battery Feeding via 230-VAC mains adapter Feeding via USB 3 adjustable transmitting powers 3 input contacts Predefined cyclical ID transmission Predefined cyclical message transmission Predefined message transmission in case of a trigger impulse at the input (total 3 inputs) 1) Message transmission via IP by a remote alarm server (e.g. I.SEARCH) Message transmission via USB by a POCSAG transmission application Connections (safety shut-down 5.5 VDC) 5 VDC USB interface (type B) 5 VDC LAN interface (RJ-45) General Dimensions (H x W x D) 160 x 90 x 50 mm Weight 280 g General radio data Frequency bands (additional frequencies on request) VHF: MHz (band B2) MHz (band B4) UHF: MHz (band H2) MHz (band H4) 12.5, 20/25 khz 512, 1200 or 2400 baud Channel spacing POCSAG data rate 1) Peripheral devices i.e. sensors may be attached to the IBT10/IBT25 enabling I/O information IBT10 location transmitter, MHz IBT10 location transmitter, MHz IBT10 location transmitter, MHz IBT10 location transmitter, MHz IBT10 location transmitter, MHz IBT20 location and paging transmitter (POCSAG) via USB, MHz IBT25 location and paging transmitter (POCSAG) via LAN, MHz 2) IBT25 location and paging transmitter (POCSAG) via LAN, MHz 2) IBT25 location and paging transmitter (POCSAG) via LAN, MHz 2) IBT25 location and paging transmitter (POCSAG) via LAN, MHz 2) ) In combination with alarm server (e.g. I.SEARCH) 24 Product Catalogue 2016

25 Emergency Call System SWISSPHONE SOS-portal Swissphone SOS-portals, such as SOS.direct and SOS.selfcare, are web based portals, which offer a hassle-free and cost effective emergency call handling solution for companies of all sizes. This solution includes software updates, GSM (SMS/GPRS) communication and hosted software making SWISSPHONE SOS-portal an effortless web solution. ET Benefits Professional emergency call portal to handle events Web based and platform independent emergency system No hardware or software installation or maintenance necessary High redundant safety solution for maximum availability Automatic event logging SOS.direct SOS.direct enables via emergency call forwardings small groups of workers to respond to one another s accidents. Archive function for following investigations Application Small, close together working groups (no active emergency call handling via portal) SOS.selfcare SOS.selfcare is a convenient emergency call portal that allows employees to receive emergency calls as they perform daily tasks. This platform is best for companies of all sizes with internal emergency call handling. Application Service technicians Call service with internal rescue staff Reception desk SOS.direct - Setting up the SOS-portal account SOS.direct - License for an emergency device per month SOS.selfcare - Setting up the SOS-portal account SOS.selfcare - License for an emergency device per month SOS-portal - Additional functionality connected / BGR139 per month per device SOS-portal - Integration of an emergency device / a positioning transmitter SOS-portal - Configuration changes (device, person, plan,...) SOS-portal - Additional messaging / forwarding (per SMS) Product Catalogue

26 Accessories Overview of the various devices Body Type: BT1 HURRICANE DUO Body Type: BT2 RES.Q SWISSPHONE TRIO Body Type: BT3 s.quad X15 s.quad X35 s.quad Voice s.quad ATEX LG Standard, ALG Standard (Car) Charger (BT1, BT2) Constant current charging or trickle charging to maintain battery capacity LED indication for both charging modes ALG Standard: 12V/DC connector Unit AA-Cells Lithium Cells Charger LG Standard Euro LG Standard UK Car charger ALG Standard Cable with plug Product Catalogue 2016

27 LGRA Expert, ALGRA Expert, LiGRA Expert (Car) Charger (BT1, BT2) Constant current charging or trickle charging to maintain battery capacity LED indication for both charging modes LED call indication BNC type antenna connection 5-PIN socket for easy connection of external devices ALGRA: 12 V/DC connector Accessories Unit AA-Cells Lithium Cells Charger LGRA Expert VHF Euro LGRA Expert UHF Euro LGRA Expert VHF UK LGRA Expert UHF UK Car Charger ALGRA Expert VHF DE955 charger LiGRA Expert VHF Euro LiGRA Expert UHF Euro LG s.quad Quick Charger (BT3) Constant current charging or trickle charging to maintain battery capacity LED indication for both charging modes BNC type antenna connection 6-PIN socket for easy connection of external devices Unit AA-Cells Charger LG s.quad Euro Charger LG s.quad UK MLG s.quad Multi Charger (BT3) 8 charging cradles LED indication for charging mode (each cradle) Optional with LAN Unit AA-Cells Multi charger MLG s.quad UNI MLG s.quad LAN MLG Expert UNI, MLiG Expert UNI Multi Charger (no LAN) (BT1, BT2) Multi Chargers With Universal Power plug (UNI) MLiG are for Lithium Cells MLG for Pagers with AA-Cells/AAA-Cells Unit AA-Cells Lithium Cells Multi charger MLG Expert UNI MLiG Expert UNI MLG Expert LAN, MLiG Expert LAN Multi Chargers with LAN connection (BT1, BT2) Multi Chargers With Universal Power plug (UNI) MLiG are for Lithium Cells MLG for Pagers with AA-Cells/AAA-Cells Unit AA-Cells Lithium Cells Multi charger MLG Expert LAN UNI MLiG Expert LAN UNI MLG library (DLL for MLiG/MLG Expert LAN UNI) Product Catalogue

28 Accessories MLiG Accumulator Gang Charger for DE955 Batteries Charge up to 6 batteries Universal power adapter Unit AA-Cells Lithium Cells Multi charger MLiG Accumulator PG Set Expert Universal Programming Unit (BT1, BT2) For all digital and analogue devices includes USB-converter cable RS-232 serial interface Programming software Programming manual Unit AA-Cells Lithium Cells Programming unit/-sw PG Set Expert Euro 1) 1) PG Set Expert UK 1) 1) CD Programming Software ) not for charging Programming Kit s.quad Universal Programming Unit (BT3) For all s.quad devices Connect over USB port Programming software Programming manual Unit Programming unit/-sw Programming Kit ) not for charging Clips Black belt clip Black belt clip with display protection (Swissphone logo) Black belt clip with display protection (no logo) Analogue pager/hurricane DUO belt clip (incl. battery door) Unit BT1 BT2 BT3 Clip, holster Black belt clip Black belt clip w. display protection (Swissphone logo) Black belt clip w. display protection (no logo) Black belt clip Battery door without clip Black belt clip (no logo) Product Catalogue 2016

29 Accessories Chain, Lanyard Chain 36 cm Lanyard 36 cm BT1 BT2 BT3 Chain Chain Lanyard Antennas 2 models 13 cm UHF antenna, fits the (A)LGRA Expert 42 cm VHF antenna, fits the (A)LGRA Expert Antenna 13 cm UHF cm VHF Leather Cases BT1 BT2 BT3 Different models with Swissphone Logo for analogue pagers and HURRICANE DUO for digital pagers (RES.Q) for s.quad pagers Holster Typ Leather Case For analogue pagers / HURRICANE DUO BT For digital pagers BT s.quad Holster BT s.quad flip down case BT USB-Adapter USB-serial cable 1 x USB 2.0, 1 x Serial D-Sub 9 m USB-adapter USB-serial cable Product Catalogue

30 Accessories Accessories RES.Q / SWISSPHONE TRIO Standard Battery (Lithium-polymer) Voltage: 3.7V Capacity: 480mAh DE955 Battery 3.7V/480mAh High Capacity Battery (Lithium-polymer) Fits LGRA Expert Voltage: 3.7V Capacity: 1230mAh DE955 Battery 3.7V/1230mAh Clip for use with High Capacity Battery Fits D955 with high capacity battery ( ) Can stay on DE955 while charging in LGRA Expert DE955 Clip for High Capacity Battery Product Catalogue 2016

31 Notes Product Catalogue

32 Paging Network Architecture Alerting networks: independent, fast, safe and reliable In an emergency every second counts. Injured persons must receive help immediately. The required rescue forces must be alerted as quickly as possible. The best way to achieve this goal is to alert via dedicated networks. They are the direct link between the command & control centre and the personnel s pagers. Alerting networks must be fail-proof and reliable in order to guarantee the best personnel availability. This requires maximum coverage and building penetration of radio waves. The backup power supply of all important system elements must be guaranteed as well. Many factors like the topography must be taken into consideration during planning and implementation. These constraints decide at the best which network type to implement. Swissphone has planned and implemented a vast number of national and international alerting networks. The following types of alerting networks are the most common: 1. Network supported Singlemasterand Multimaster Networks Network supported alerting networks connect to master base stations by LAN, WAN, ISDN or directional radio. A network consists of one (single-) or several (multi-) master stations as well as slave base stations. The master base stations transmit messages and control the slave base stations simultaneously. This ensures the safe transmission of an alert over a wide area. Capability of two-way communication allows to configure and monitor the base stations remotely to maximise transmission safety: in case of failure, alerts are automatically retransmitted. 2. Network supported Multi Baud Rate Networks Additionally to 1), Paging networks capable to transmit with multiple baud rates, can increase throughput and help migrating a vast base of pagers. This results in extremely fast response time, much better network capacity utilization as well as superior investment protection. 3. Self-reliant Networks On top of 2), Self-reliant networks allow to alert by multiple paths, e.g. from decentralized firehouses into the network. They don't rely on wired backhaul or 3rd party infrastructure. Self-reliant networks pose the most advanced paging technology. 32 Product Catalogue 2016

33 Paging Network Architecture Alarm input terminals Access Network Paging Network Controller (Redundant) Distribution Network Radio Network Terminals C&C Working place Base stations POCSAG IP Network PNC Server IP Network Pager Alarm input Decentralised C&C (Firehouse) PNC Paging Network Controller The Paging Network Controller (PNC) is the core of critical communication infrastructure. It consists of the following software modules: Paging Operations Structure Configurator Operation & Maintenance Centre (OMC) Database SQL Server Express Edition The Paging Operations is responsible for the whole alerting job chain. Incoming paging messages from the input systems through TMIP interface are queued, batched and sent to the dispatching stage. The Dispatcher controls the distribution of the paging data as well as the base station configuration and monitoring confirmation data to and from the base stations. Additional features like message priority, message input cap, overload mode, encryption capability, complement the Paging Operations. The Structure Configurator features the simple and safe configuration of the whole paging network. Additional features include easy drag-and-drop functionality as well as a configuration manager which allows to save and restore different network configurations. PNC single licence Product Catalogue

34 Paging Network Architecture POCSAG Base Stations The ITC2100 base station is a fundamental component in Swissphone wireless alerting systems and is deployed for transmitting in synchronized POCSAG paging alert networks. The ITC2100 is backwards compatible to its predecessors ITC2000 and ITC600, and can be added to these networks for concentration and extension. The ITC2100 faciliates both large-area synchronized alerting across an entire network infrastructure or local alerting. The ITC2100 can be programmed and implemented quickly using a web browser, both on location or remotely. The Swissphone ITC2100 forms the foundation for secure and reliable alerting. ITC2100-BOS High-end POCSAG base station Swissphone s 5th generation base station is deployed in a paging network, where ringnet topology or simulcast transmission applies. The compact, 3 RU design perfectly allows for mounting in a 19" rack. It consists of the following modules: power supply, controller, POCSAG decoder card, POCSAG synchronisation card and RF transceiver. Approved by the German TR-BOS authority (DAU II-08/08) Multiple baud rates (optional) Designed for high traffic (duty cycle 100%) Transmission power 5-25W Power supply 230VAC or 12VDC as backup Easy configuration through web-interface Two rear antenna connections N-type 50Ω for Rx/Tx ITC2100-BOS VHF 2m 25W, Multi Baud Rate ITC2100-BOS VHF 4m 25W ITC2100-BOS UHF 25W ITC2100-BOS options Wall-mounted housing 6U GPS receiver, GPS interface card I/O card (5x opto IN / 7x relais OUT) Product Catalogue 2016

35 I.SITE III Transmitter Paging Network Architecture The I.SITE IIl is a paging network transmitter used to expand radio coverage of a Swissphone on-site POCSAG paging system. It is easily connected over the LAN. It can be used as a stand-alone solution or in combination with I.SEARCH (see page 36). Possible applications include hospitals, airports, oil/energy platforms, major construction projects. : Interface: Hardware: Mains powered, Input voltage range from VAC / 50-60Hz There are three options available: An integrated battery (2Ah) allows uninterruptable operation for up to 6 h three dry input contacts door contact (gives a signal when frontdoor will open or close) The output power can be adjusted from 1 up to 25W in 1W steps LAN interface, Protocol TAP, ASCI simple There is no additional HW necessary Designation 25W wall mounted transmitter box, 136 to 174 MHz I.SITE III VHF Tx-output power ex-factory adjustable: 1, 5, 12, 25W ( MHz) VAC/50Hz powered, (Optional: back-up battery 12V/2Ah) Antenna connector 50 ohm N-Type 25W 25W wall mounted transmitter box, 400 to 470 MHz Tx-output power ex-factory adjustable: 1, 5, 12, 25W 230VAC/50 Hz powered, (Optional: back-up battery 12V/2Ah) Antenna connector 50 ohm N-Type 25W wall mounted transmitter box, 450 to 530 MHz Tx-output power ex-factory adjustable: 1, 5, 12, 25W 230VAC/50 Hz powered, (Optional: back-up battery 12V/2Ah) Antenna connector 50 ohm N-Type Options I.SITE III UHF ( MHz) 25W I.SITE III UHF ( MHz) 25W Integrated battery (2Ah) Three dry input contacts Door contact I.SITE Plus Transmitter The I.SITE Plus is a paging network transmitter used to extend the radio coverage of a Swissphone on-site POCSAG paging system. As a dedicated stand-alone solution, pre-defined messages can be transmitted by the inbuilt push-buttons. It is easily connected over the LAN and can be integrated into larger networks through I.SEARCH. Possible applications include hospitals, airports, freightports, oil/energy platforms, petrochemistry, power plants, cruise ships, universities, prisons, large construction projects. : Mains powered, Input voltage range from VAC / Hz. Additionally, an integrated backup battery (2 Ah) allows uninterruptable operation for up to 6 h. Three dry input contacts are available in parallel to the inbuilt push-buttons. The output power can be adjusted from 1 up to 25 W in 1 W steps. LAN interface, TAP and ASCII simple protocol. Designation 25W wall mounted transmitter box, 136 to 174 MHz I.SITE Plus VHF Tx-output power ex-factory adjustable: 1, 5, 12, 25W ( MHz) VAC/50Hz powered, 12V/2Ah backup battery Antenna connector 50 ohm N-Type 25W Product Catalogue

36 I.SEARCH For critical Messaging and Alerting Solutions >> For certified partners only << The I.SEARCH simplifies on-site alerting, paging and people search for a variety of organisations and industries. People search Meet me Call-me Third party system integration Building control systems Fire alarms Nurse call systems Machinary Alerting SNMP Organisation Absence Escalation Configuration Telephone connection IT connection Automated messaging I.SEARCH CPU Backup Extension Analoge modem ISDN modem I/O contacts Watchdog Pager GSM Miscellaneous Server monitoring Radio network monitoring Voice connection Remote monitoring Direct messaging GSM Integrated 4 W transmitter (or 25W) RS-422 interface 36 Product Catalogue 2016

37 I.SEARCH I.SEARCH enables the following telephone and paging services: Basic services: Call-me: This feature allows users to contact requested persons directly. Call-me (standard) Users call the system and enter the contact number of the requested employee. The requested employee receives a message from I.SEACH including the number of the seeking person to contact him/her. The user receives a confirmation whether his call was forwarded or not. Call-me (with number entry) Users call the system and enter the contact number of the requested employee. In addition they enter a all-back number. The requested employee receives a message from I.SEARCH including the call-back number of the seeking person to contact him/her. The user receives a confirmation whether his call was forwarded or not. Meet-me: Users who call the in-house paging centre are asked to speak the name of the requested employee he/she would like to reach and then remains on the line. The requested employee s pager displays a number that identifies the user attempting to call him/her The requested employee calls the user from any available telephone to be connected directly. If the requested employee does not call back within a specified period of time, the user may leave a text message which may be spoken and converted to text. Web-me: The Web-me feature allows users to send an alphanumeric message to the employee via a web page. Mail-me: The Mail-me feature allows user to send an alphanumeric message to the employee via . Alert-me: Following an alert or status message, the Alert-me feature allows users to send a predefined text with instructions on how to respond to the message. Supplementary features: Permanent absence: Employees can have calls forwarded in their absence. Temporary absence: Plugging the pager into a multicharger will forward calls in accordance with previously input instructions. Escalation management: Employees can be alerted automatically according to an alerting plan and their deputies. Monitoring features: Monitors the entire system with a cyclical test call ( loopback call) Monitors RF coverage with a cyclical test call and a monitor Monitors hardware and software components and events Monitors the I.SITE II transmitter with collective confirmation after each transmission Monitors the I.SEARCH slave Transmits warning messages from third-party networks Interfaces: Hardware In- and Output contacts ESPA serial interface TAP serial interface DTMF dial in functionality SMS/SDS send and receive functionality SNMP server and client functionality Generic raw data input Administration features: User and group management General purpose system configuration Configuration of the input and output systems Log book Remote maintenance Time synchronisation I.SEARCH modular concept The various hardware- and software modules enable users to configure a custom solution to their requirements. When configuring the I.SEARCH it is important to take technical and statutory requirements such as the local law, the required transmission power or existing interfaces into consideration. The basic system consists of a 19" rack with a controller and a power supply unit. The base unit must be chosen according to the required transmitter. The base unit can be equipped with 6 additional hardware options. They are controlled via an AT-bus system. Product Catalogue

38 I.SEARCH I.SEARCH Base Units Base Unit for 4W transmitter : Hardware: Size: Software: Desktop case, AC or DC versions for 4W transmission unit and controller card as desired. AC or DC power supply, BSC controller card, Com 2 interface 19" rack, Height: 3 U, Width: 84 HP, Depth: approx. 330 mm Current I.SEARCH basic software incl. Linux Kernel and applications I.SEARCH Base Unit VAC / 4W TX I.SEARCH Base Unit 48VDC / 4W TX Base Unit for 25W transmitter : Hardware: Size: Software: Mounting case, AC or DC versions for 25W transmission unit, controller card and transmitter control unit SC. A connection for an emergency power supply and a 12V/1A feeding voltage is located at the backside. This base unit offers only three expansion ports. The uninterruptable power supply option (UPS) is only available with an external USP unit. AC or DC power supply, BSC controller card 19" rack, Height: 3 U, Width: 84 HP, Depth: approx. 330 mm Current I.SEARCH basic software incl. Linux Kernel and applications I.SEARCH Base Unit VAC / 25W TX 1) I.SEARCH Base Unit 48VDC / 25W TX 1) ) Only available with 25W transmitter Article No Base Unit for 100W transmitter (external) : Hardware: Size: Software: Desktop case, AC or DC versions. For 100W external transmitter. The interfaces to connect the external transmitter unit TB8100 are located at the backside. No other transmitter unit can be connected. This base unit offers six expansion ports. AC or DC power supply, BSC controller card, transmitter control unit SC for POCSAG 19" rack, Height: 3 U, Width: 84 HP, Depth: approx. 330 mm Current I.SEARCH basic software incl. Linux Kernel and applications I.SEARCH Base Unit VAC / 100W TX 2) 3) I.SEARCH Base Unit 48VDC / 100W TX 2) 3) ) Without transmitter 3) Only available with 100W transmitter Article No Product Catalogue 2016

39 I.SEARCH Base Unit Server PC : Hardware: Size: Software: The Server PC is an up to date fan less computer with a solid state disc (SSD). Available power supply from VAC. It can only be used with software modules and hardware that can be connected through an IP connection. AC power supply, fan less CPU main board, SSD 19 rack, Height 1U Current I.SEARCH software incl. Linux and applications I.SEARCH HW/SW Server PC I.SEARCH Hardware Modules AC 60W / DC 80W Power Supply : Hardware: Hardware: Size: The AC (new PS60W-230VAC) module is integrated in the base unit for the 4W and 100W transmitter versions. It supports from 100VAC +/-15% 50 Hz to 230VAC +/-10% 50 Hz input voltages and supplies both +5VDC/7 A and +15VDC/2.5A output voltages. The module is neither intended for base units with internal 25W-Transmitter nor for charging external backup batteries. The DC (new PS80W-48VDC) module is integrated in the base unit for 4W and 100W versions. It supports from 36VDC to 75VDC input voltages and supplies both +5VDC/7A and +13.5VDC/2.5 A output voltages. The module is neither intended for base units with internal 25W-Transmitter nor for charging external backup batteries. The galvanic separation between in- and output enables the operation from -48VDC as well as the connection to backup batteries of an external PABX. Power Supply DC/DC 5V/13.8V (Vin 36-72V) Power Supply Unit AC/DC 8 HP Designation 230VAC/50Hz power supply with max. 60W output power PS60W-230VAC VDC power supply with max. 80W output power PS80W-48VDC AC 150W / DC 175W Power Supply : Hardware: Size: The PS150W (new PS150W-230VDC) module is required for the internal 25W transmitter unit. It supports from 100VAC/50Hz to 240VAC/50Hz input voltages and supplies both +5VDC/5A and +13.8VDC/8A output voltages. It can charge external 12V backup batteries with max. 2A charging current. The PS48VDC (new PS175W-48VDC) module is required for the internal 25W transmitter unit. It supports from 36VDC to 72VDC input voltages and supplies both +5VDC/5A and +13.8VDC/11A output voltages. It can charge external 12V backup batteries with max. 2A charging current. The galvanic separation between in- and output enables the operation from -48VDC as well as the connection to backup batteries of an external PABX. Power Supply Unit AC/DC 13.8V/5V 150W Power Supply Unit DC/DC 13.8V/5V 175W 24 HP Designation 230VAC/50Hz power supply with max. 150W output power PS150W-230VAC VDC power supply with max. 175W output power PS175W-48VDC Controller Module : Hardware: Size: The BSC is a single board computer with 1GB RAM, 512MB-Flash-Disk and a backup battery CR2032. The following connectors are located at the front: Keyboard; COM1, VGA; 2xUSB, 1xLAN. Controller Card BSC 8 HP Designation Controller with LINUX operating system and 1GB-RAM, 512MB-Flash, back-up battery BSC Product Catalogue

40 I.SEARCH Serial Interface Module (RS232) : Serial communication with RS232-port for external access COM2. The COM2 module is a front panel with a 9-pole D-sub connector (female). It is connected with the COM2 interface of the controller card BSC. It is required for the connection of external interfaces. Hardware: - Size: 4 HP Designation Communication interface with RS232-port for external access (3TE) COM Communication interface with RS232-port for external access (4TE) COM Transmitter Control Module : Hardware: Size: Software: The SC module communicates with the controller BSC via AT-Bus and performs the following two main tasks: controlling the internal (Tx-4W / TRx-25W) and/or the external (I.SITE II / TB W) POCSAG transmitter; read-in the shutdown button for BSC. Three LEDs show the status at the front panel: +5VDC operating voltage; POCSAG message transmission to TX/TRx and external 100W unit. A reset button deletes the on-board POCSAG message storage. Two optocoupler ports (data input) and one open collector port (data output) can be controlled via the 9-pole D-sub conector (female) at the front panel. The following HW modules are controlled via the SC module: OIC module for I.SITE II control; bear in mind: - Max. 4 piece OIC, if no I/O module is used - Max. 2 piece OIC, if the I/O module is used I/O module 1 piece Module SC 4 HP Transmitter control SW module Designation Synchronisation controller and POCSAG generator With two input-ports and one output-port SC Option for backfitting (instead of ) Transmitter Module 4W : The 4W transmitter module Tx-4W is constructed as a plug in module. Up-front is a 50 Ohm BNC-type antenna connector. The module is powered internally via a 2-pole connector xvdc. Parameter settings will be established via a mini USB plug. Only available for 4W base station / Hardware: Factory settings: Transmitter Frequency: MHz Channel Spacing: khz (12.5kHz, 20kHz, 25kHz) Transmission Power one out of 7 values: a) 50, 100, 250, 500 mw b) 1, 2, 4W Size: 8 HP Software: - Designation 4W transmitter plug-in module, MHz Tx-output power adjustable in 7 steps Up-front antenna connector 50 Ohm BNC Factory settings: Tx-frequency: Channel spacing: Output power: MHz khz W 4W transmitter plug-in module, MHz Tx-output power adjustable in 7 steps Up-front antenna connector 50 Ohm BNC Factory settings: Tx-frequency: Channel spacing: Output power: MHz khz W Tx-4W-VHF on request Tx-4W-UHF ) for Base Unit or and transmitter control module ) for Base Unit Product Catalogue 2016

41 Transmitter Module 25W I.SEARCH : The 25W transmitter module TRx-25W is constructed as a plug in module. Up-front there is an antenna connector 50 Ohm N-type. The module is powered internally via a 2 pole connector. Parameter settings will be established via a RS-232 connection with a dedicated programming software. Only available for 25W base station / Hardware: The following parameters will be set ex-factory: Transmitter Frequency: MHz Channel Spacing: khz (12.5 khz, 20kHz, 25kHz) Transmission Power one out of 7 values: 5 to 25W, programmable in 1W steps Size: 19 HP Software: - Designation 25W transmitter plug-in module, 66 MHz to 88 MHz Tx-output power adjustable in steps of 1W Two rear antenna connector 50 Ohm N-Type Ex-factory adjusted for: Tx-frequency: MHz Channel spacing: khz Output power: W 25W transmitter plug-in module, 136 MHz to 174MHz Tx-output power adjustable in steps of 1W Two rear antenna connector 50 Ohm N-Type Ex-factory adjusted for: Tx-frequency: MHz Channel spacing: khz Output power: W 25W transmitter plug-in module, 400 MHz to 470MHz Tx-output power adjustable in steps of 1W Two rear antenna connector 50 Ohm N-Type Ex-factory adjusted for: Tx-frequency: MHz Channel spacing: khz Output power: W Watchdog Module TRx-25W-VHF TRx-25W-VHF TRx-25W-UHF : The watchdog monitors the BSC and the internal +5VDC operating voltage via the AT-Bus. Respective disturbances will be displayed via one switch-over relays-contact. A green LED indicates the three I.SEARCH operating modes: 1. The LED is dark +5Vdv fails 2. The LED blinks The watchdog is booting 3. The LED lights The watchdog is active Hardware: When inserted into the I.SEARCH case, the shut-down button at the front panel has no function. Size: 4 HP Software: - Designation Watch dog and output port controller With two switch-over relays-contacts WD Option for backfitting (instead of ) LAN Module : The optional Ethernet LAN module is an additional network adapter. It is connected to the BSC controller card via AT-Bus. It is required when two separate networks must access the same I.SEARCH. AT-Bus. It provides a data transfer rate of up to 10MB/s. Hardware: LAN module with carrier plate and 10MB/s Ethernet module. Size: 8 HP Software: - Designation LAN interface module for an additional LAN connection LAN Option for backfitting (instead of ) Product Catalogue

42 I.SEARCH GSM Module : Hardware: Size: Software: The GSM module transmits or receives voice, data (GPRS) and text messages (SMS). The module is quad Band capable and has a FME connector at the front to attach an external antenna. Two LED s indicate the operating status and network activity. Standard cards fit in the SIM card slot. Quad Band GSM module, SIM card slot, status LED 4 HP GSM SW module Designation GSM module HW/SW GSM Option for backfitting (instead of ) DIO16 Interface Module (16 inputs / 16 outputs) : Hardware: Size: Software: The DIO16 module provides 16 digital in- and outputs and may be used with other third party control systems. DIO16 module DIO16 carrier plate 4 HP DIO16 software module Designation DIO16 module DIO Option for backfitting (instead of ) DIO7/8 Interface Module (7 inputs / 8 outputs) : Hardware: Size: Software: The DIO7/8 module provides 7 digital inputs and 8 outputs and may be used with other third party control systems. It requires the transmitter control module SC. DIO7/8 interface module DIO7/8 interface carrier plate 4 HP DIO7/8 interface software Designation DIO7/8 interface DIO7/8 1) Option for backfitting (instead of ) ) Only available with transmitter controller Uninterruptable Power Supply UPS Designation Uninterruptable power supply UPS unit 2) with integrated charging controller SM module Plug-in backup battery 12V/7Ah EPS505 UPS ) For Base unit , or 4W I.SEARCH Slave transmitter POCSAG RX Module : The PRM module is an intelligent POCSAG receiver. It can receive messages from other POCSAG network. This received messages are filtered and depending on the result of various predefined rules, the system converts it to the assigned output system. Hardware: Module PRM (Carrierboard), excl. MS POCSAG Size: 8 HP Software: - Designation POCSAG RX module PRM Option for backfitting (instead ) POCSAG receiver module UHF MS POCSAG Page Product Catalogue 2016

43 I.SEARCH Telephony Access Modules : The PSTN module provides a standard port to an analogue telephone network. Hardware: Analogue PSTN modem Size: 4 HP Software: - Only Hardware module 1) (Analogue PSTN modem) Option for backfitting Hardware module (instead of ) : The ISDN module provides a EURO ISDN port to a digital telephone network. Hardware: ISDN single channel modem Size: 4 HP Software: - Only Hardware module 1) (ISDN single channel modem) Option for backfitting Hardware module (instead of ) : The ISDN/PSTN module provides a EURO ISDN and an analogue port. Hardware: ISDN/PSTN modem Size: 4 HP Software: - Only Hardware module 1) (ISDN/PSTN modem) Option for backfitting Hardware module (instead of ) : The ISDN/ISDN module provides two EURO ISDN ports to the digital telephone network. Hardware: ISDN double channel modem Size: 4 HP Software: - Only Hardware module 1) (ISDN double channel modem) Option for backfitting Hardware module (instead of ) ) Only available with telephony software modules - see I.SEARCH Software Modules in section ISDN / PSTN Telephony Software Modules Telephony Access Bundles (HW & SW) Telephony Access Module PSTN incl. Software module DTMF Option for backfitting incl. Software (instead of ) Telephony Access Module ISDN incl. Software module Remote Access Option for backfitting incl. Software (instead of ) Telephony Access Module ISDN/PSTN incl. Software module Remote Access & DTMF Option for backfitting incl. Software (instead of ) Telephony Access Module ISDN/ISDN incl. Software module Remote Access & DTMF Option for backfitting incl. Software (instead of ) Product Catalogue

44 I.SEARCH I.SEARCH Software Modules ISDN / PSTN Telephony Software Modules : The following three software modules 1) DTMF, Remote Access and Third Party Systems can only be used with the hardware Telephony Access Modules modules. 1) Only available with telephony access modules - see I.SEARCH Hardware Modules in section Telephony Access Modules Software: : DTMF (Dual-Tone Multi-Frequency recognition) The software module DTMF is a dial-in-system and is used to address a user or a group of users with a short code. In combination with the SW module escalation management it also can be used as a acknowledgment channel for a request. DTMF SW license Software: : Remote Access The software module Remote Access is used to give access to dedicated service personal. It works in callback procedure and gives then access to the Web interface. Remote Access SW license Software: : Third Party Systems The software module Third Party Systems is used to access third party systems like SMSC (GSM) or a paging network. Third Party Systems access to paging network (UCP) SW license Third Party Systems access to SMSC (UCP) SW license High Availability Cluster : The High Availability Cluster module combines two I.SEARCH systems to be a cluster. While the whole cluster is addressed via a virtual IP address, the single I.SEARCH systems can be accessed via their own IP address as well. Each system monitors its own hard- and software modules. The result of this surveillance is listed in a table. The comparison of both tables determines which system is active and which is not. Both Systems are in an infinite dialogue observing each other via the IP network. If the active system does not respond or the passive system reaches a higher score within the table, it immediately takes over the operation. External systems always communicate with the I.SEARCH cluster via the virtual IP address. The individual IP address of each system is used for remote access purposes only. Hardware: External IP network (switch) High Availability Cluster (One license for two redundant I.SEARCH base units) IDEA Encryption Software: IDEA Encryption for POCSAG paging is an optional software module of the Swissphone I.SEARCH platform. With using IDEA encryption, it is possible to send encrypted messages to IDEA capable pager. For this purpose, up to 32 keys can be stored. IDEA Encryption for POCSAG paging SW license Product Catalogue 2016

45 Operation Management : I.SEARCH With the operation management software module (or EMS - Employment Management Software) is it possible to generated user groups on the I.SEARCH which can be scheduled to be available for specific times only, for example only Mondays, using employment plans. Operation management SW license Message Confirmation : The Message Confirmation Software is for message confirmation. It is possible to confirm messages over different input systems like SMS or DTMF Software for Messge Confirmation SW license Escalation Management : Escalation management gives the user the opportunity to assign incoming alerts and error messages to a pre-defined escalation workflow. Escalation involves one or more groups of people who are alerted in the event of an incident. Each escalation level has a minimum number of persons or resources that are alerted. If this is achieved and the appropriate number of resource confirmations has been received escalation is considered to have been accomplished and is ended. If not enough resources are available or too few positive confirmations have been received after a pre-defined time has elapsed the next escalation level is activated. Escalation can be triggered via all input systems. The following input systems can be used to confirm an alert: confirmation from SWISSPHONE TRIO or RES.Q pagers, SMS, telephone or the WEB interface. Escalation Management SW license Absence Management : The Absence Management software stands for three absence management systems folowing: - Absences of a person for a future event (works on all output systems) - Absences for Multicharger Racks(MCR); If a person is absent, so the pager is in the multi-charger plugged in, the alarm message will forwarded to another user/group. - External absences Absence Management SW license Pager Time Synchronisation : With the Pager Time synchronisation software module is it possible to synchronize the time of the pager with the system clock of the system. This is only available for Swissphone pager with the OAP functionality. Pager Time synchronisation of POCSAG pagers transmission SW license Dictionary for Text to Speech Pager : With the Dictionary for Text to Speech Pager HURRICANE DUO is it possible to maintain a centralised dictionary for foreign languages Dictionary for Text to Speech Pager SW license Product Catalogue

46 I.SEARCH Automatic Data Replication : Automatic Database Replication between two or more I.SEARCH. Automatic Data Replication SW license Simple Multi-Client Capability : The Simple Multi-Client or multi-tenant capability gives the ability to administrate different groups of users on the same system. Simple Multi-Client Capability SW license MIP11 Plus Interface : The MIP11 Plus protocol is a proprietary Swissphone protocol. It is used to connect third party system in a simple way as an in - or output system. Please inquire for documentation. MIP11 Plus interface SW license 1) ) with Base unit only LAN interface available (no RS-232) ESPA : The ESPA software protocol was established in November 1984 by the European Selective Paging Manufacturers Association (ESPA) specified. The Protocol is used for exchanging messages between two communication systems. The I.SEARCH system operates as an input system. ESPA SW license TAP Interface : The TAP (Telocator Alphanumeric Protocol) software protocol contains several blocks withvarious information about the message to be sent. This protocol is compatible with special input devices available from numerous sources. The I.SEARCH system operates as an in- or output system. TAP interface SW license TMIP Interface : The TMIP protocol is a proprietary Swissphone protocol. It is for the connection to a PNC (Pager Network Controller) or from a ELR. Please inquire for documentation. TMIP Interface SW license Product Catalogue 2016

47 Tetra PEI Interface IN/OUT I.SEARCH : Tetra PEI Interface IN/OUT (Functionality is SDS (Short Data Service), SMS for Tetra networks) Tetra PEI Interface IN/OUT SW license SNMP : The I.SEARCH with its alarm-server function can handle Simple Network Management Protocol SNMP. Via SNMP accessed variables are organized in hierarchies. These hierarchies and other metadata (such as type and description) are described by the Management Information Base MIB. It describes the structure of the subsystem management data and uses a hierarchical namespace containing Object Identifiers OID. Each OID identifies a variable that can be read or set via SNMP. MIB uses the notation defined by the Access Service Network ASN1. Two categories of SNMP are used: 1. Sending data from the I.SEARCH to its supervising system (output software license). It retrieves the information through the GET, GETNEXT and GETBULK protocol operations. Spontaneous information is sent to the supervisor using TRAP or INFORM protocol operations. 2. Receiving data from different systems supervised by the I.SEARCH (input software license). Triggered by a TRAP. SNMP output SW license SNMP input SW license I.SEARCH External Devices / Accessories Monitoring MS POCSAG + SW-Modul MS POCSAG Page 17 Transmitters (100W) Hardware: Transmitter unit TB8100 Software: - Transmitter (external units) 100W Transmitter Unit VHF MHz 1) W Transmitter Unit UHF MHz 1) ) Only with base unit or I.SITE II Transmitter Interface Module The OIC module is an output/input controller interface which connects Swissphone I.SITE POCSAG transmitters-for radio coverage expansion-to an Swissphone on-site paging system. Per interface up to 4 transmitters I.SITE : The hardware module OIC is controlled by the SC module. Up to three I.SITE II can be operated by a twisted wire connection per SC. The connection may not exceed 600m. This enables simulcast On-SITE radio coverage. It is possible to use two OIC cards simultaneously. Up to six I.SITE II can be used. Hardware: The SC module can control up to six simulcast I.SITE II: Via internal connector STI-01 2 OIC in cascade for total 6 I.SITE II Size: 4 HP Software: - I.SITE II OIC transmitter interface module 2) ) For Base Unit or and Transmitter Controller Product Catalogue

48 I.SEARCH Intelligent Beacon Transmitter (indoor solution) IBT25 For more information see: Emergency call system Page 24 I.SITE II Transmitter The I.SITE II is a paging network transmitter used to expand synchronous radio coverage of a Swissphone on-site POCSAG paging system. The I.SITE II Transmitter hast to be connected via serial RS422 to the I.SITE II Interface Module. The connection may not exceed 600m. : The power supply starts at 230VAC/50 Hz. An integrated battery (2Ah) allows uninterruptable operation for up to 12 h. The output power can be adjusted to 1, 5, 12, 25W Hardware: The hardware module OIC must be installed in the I.SEARCH. Every OIC can control up to three I.SITE II. Software: - Designation 25W wall mounted transmitter box, 136 to 174 MHz Tx-output power ex-factory adjustable: 1, 5, 12, 25W 230VAC/50Hz powered, back-up battery 12V/2Ah Antenna connector 50 ohm N-Type I.SITE II-VHF Ex-factory adjusted for: Tx-frequency: MHz Channel Spacing: khz Output power: W 25W wall mounted transmitter box, 400 to 470 MHz Tx-output power ex-factory adjustable: 1, 5, 12, 25W 230VAC/50 Hz powered, back-up battery 12V/2Ah Antenna connector 50 ohm N-Type Ex-factory adjusted for: Tx-frequency: MHz Channel Spacing: khz Output power: watt I.SITE II-UHF Product Catalogue 2016

49 I.SITE III Transmitter I.SEARCH The I.SITE IIl is a paging network transmitter used to expand radio coverage of a Swissphone on-site POCSAG paging system. It is easily connected over the LAN. I.SITE is an accessory to the Swissphone I.SEARCH platform. : Interface: Hardware: Software: Mains powered, Input voltage range from VAC / 50-60Hz There are three options available: An integrated battery (2Ah) allows uninterruptable operation for up to 6 h three dry input contacts door contact (gives a signal when frontdoor will open or close) The output power can be adjusted from 1 up to 25W in 1W steps LAN interface, Protocol TAP, ASCI simple There is no additional HW necessary Master/Slave module in combination with an I.SEARCH solution Demonstration software available on request Designation 25W wall mounted transmitter box, 136 to 174 MHz Tx-output power ex-factory adjustable: 1, 5, 12, 25W 230VAC/50Hz powered, (Optional: back-up battery 12V/2Ah) Antenna connector 50 ohm N-Type Ex-factory adjusted for: Tx-frequency: MHz Channel Spacing: khz Output power: W 25W wall mounted transmitter box, 400 to 470 MHz Tx-output power ex-factory adjustable: 1, 5, 12, 25W 230VAC/50 Hz powered, (Optional: back-up battery 12V/2Ah) Antenna connector 50 ohm N-Type Ex-factory adjusted for: Tx-frequency: MHz Channel Spacing: khz Output power: W 25W wall mounted transmitter box, 450 to 530 MHz Tx-output power ex-factory adjustable: 1, 5, 12, 25W 230VAC/50 Hz powered, (Optional: back-up battery 12V/2Ah) Antenna connector 50 ohm N-Type Ex-factory adjusted for: Tx-frequency: MHz Channel Spacing: khz Output power: W I.SITE III VHF ( MHz) 25W I.SITE III UHF ( MHz) 25W I.SITE III UHF ( MHz) 25W Options Integrated battery (2Ah) Three dry input contacts Door contact UPS as an external Solution : A backup battery can be charged outside of the I.SEARCH case. To do this, connect it to the feeding module via the connector at the backside. The maximum charging current is 2A at approx. 13.5VDC charging voltage. Hardware: The following hardware modules are required to charge backup batteries externally: PS48VDC (175W) for DC input voltage, article no PS150W (150W) for AC input voltage, article no Software: - Designation External backup battery Rechargeable battery 12V/12Ah Product Catalogue

50 I.SEARCH Digital Inputs over IP Interface with 32 optically isolated inputs via Ethernet to the SeaIevel 430E. Inputs can handle 5 to 30VDC and provide 300V isolation voltage. Connection is made using convenient 3.5 mm removable screw terminal connectors. The SeaIevel 430E can handle 9 to 30VDC input. Hardware: 1) Sealevel 430E and/or 2) Sealevel 430N Software: LAN Inputs SW Module Alert contact server extension (external units) 4 x 8 Inputs over IP 1) Option for backfitting (instead ) Sea-level 430E Extension to 4 x n inputs 2) Sea-level 430N U 19 Inch Rack Tray Sealevel 1U 19 Inch Rack Tray DIN Rail Mounting Clips - for Seal/O DIN Rail Mounting Clips - for Seal/O Multicharger (Absence Management) Hardware: Software: Device MLG/MLiG Expert/MLG s.quad CD-ROM MLG AA-Cells Lithium Cells MLG Expert multicharger with LAN connection MLiG Expert multicharger with LAN connection AA-Cells Lithium Cells MLG s.quad multicharger with LAN connection Accessories Magnetic GSM antenna Product Catalogue 2016

51 Notes Product Catalogue

52 DiCal-FDM Wireless data sytems DiCal-FDM Wireless data systems Efficient fleet management We offer an effective and comprehensive solution for economically optimising your fleet management and vehicle communication, providing you with the easiest possible access to all information and communication networks. Radio operation is kept as easy as possible for the vehicle crew and they can navigate to the response location in a quick and uncomplicated way. All the while, the dispatcher is constantly informed of the vehicle s status and location. Functionalities FDM.X (data & voice) FDM3 (data) Data transmission Voice communication and Telephony Radio control analogue / TETRA Automatic routing and tracking Short time UPS CAN-BUS Status-Panel Data radio channels POCSAG Analog Radio * TETRA * GSM Telephony UMTS LTE WIFI (Access point and router) Navigation Systems Windows7 embedded PC-board Garmin Rear camera support *with connected radio device RED (data) 52 Product Catalogue 2016

53 Wireless data systems DiCal-FDM.X Wireless data module for automatic navigation/localisation and usage of up to 5 radio ways (POCSAG, UMTS, TETRA, FFSK, WLAN). Connectivity for up to 4 radios (2 x analog / 2 x TETRA radio). Perfect for telephony and migration from analog to TETRA radio by using one single handset. Navigation by using an integrated Software on Windows 7 embedded or by using an external navigation device from Garmin. Capable of setting up a WLAN-UMTS-Access point with router functionality in the car. DiCal-FDM.X on request DiCal-FDM3 Wireless data module for multiple data connections. Same radio performance as DiCal-FDM.X; but no voice transmission 2 CAN-BUS interfaces Capable of using LTE DiCal-FDM.3 on request DiCal-RED Wireless data module for multiple data connections. Capable of using LTE Usage with statuspanel Navigation with Garmin device Compact design DiCal-RED on request Product Catalogue

54 erix Communication system Communication system for command and control centers and mobile command vehicles The erix communication system connects a wide variety of communication means and subsystems, such as telephony, radio, building technology, voice documentation and alerting. Thanks to its intuitive touch user interface, communication and control tasks can be completed easily and reliably. The system can trigger events automatically through the erix matrix: For example, the building management technology. Lighting, doors and many others can be controlled if an alert is received. But the erix matrix can also trigger automatic alerting when risks are identified, such as fire and flooding. A simple touchscreen-user-interface offers a fast and easy use for voice and data communication: Radio analogue / TETRA / DMR SDS receive / transmit Telephone (VoIP) Building automation (IO, EIB/KNX) Alerting (5-Tone, POCSAG) SMS receive / transmit Voice recorder and much more 54 Product Catalogue 2016

55 Communication system Functionalities erix. compact erix. advanced erix. command Connections to subsystems PABX connection via VoIP Analogue radios up to 4 Digital radios up to 4 SDS Building Automation IO, EIB/KNX optional optional Alerting and Receiving 5-Tone optional optional Alerting and Receiving POCSAG optional optional External Voice recorder optional optional Software functionalities Touchscreen GUI Telephone book Integrated touch keyboard Vehicle status monitor Event documentation Import / Export of telephone book optional optional optional SMS optional optional Matrix functionality Interface ELS Windows 7 Professional 32/64 Bit support Windows 10 support in preparation in preparation in preparation erix.compact /.advanced /.command erix.compact for mobile command vehicles and small control rooms erix.advanced for middle and big size control rooms erix.command for command and control centers individual offer individual offer individual offer Product Catalogue