1105W Series. Product features. Recommended Applications. Single Color Dome Lens Type (High Reliability type, V-Series)

Transcription

1 Product features Package Product features Dominant wavelength Spatial distribution 326 fixed lens type, Water clear epoxy Outer Dimension 3.2 x.6 x.85mm( L x W x H ) Wide operation temperature range. Storage Temperature : InGaN : -40 ~ : AlGaInP : -40 ~20 Operating Temperature : -40 ~0 Operation Guarantee Ramification of luminosity group sorting. It is possible to have a uniform transmission with little irregularities even when several are lined up. Systematization of luminosity groups and color tone groups. Unified to a simple standard. Corresponding to a use requiring high reliability in cars etc... Surface Mount Type and Reverse Mount Type are possible. Shape resin into a lens to make high luminosity possible. Lead free soldering compatible RoHS compliant Blue Green Yellow Green Yellow Orange Red : 470nm (VUB) : 530nm (VUG), 562nm(VYBG) : 572nm (VYPY) : 590nm (VFY) : 5nm (VFA) : 65nm (VFV), 626nm (VFR) VUB,VUG:20deg. VYBG,VYPY,VFY,VFA,VFV,VFR:40 deg. Die materials VUB,VUG : InGaN VYBG, VYPY, VFY, VFA, VFV, VFR :AlGaInP Optical efficiency Rank grouping parameter Assembly methods (customer) Soldering methods VUB :.9lm/W VUG : 23.6lm/W VYBG :.3lm/W VYPY : 4.8lm/W VFY :.8lm/W VFA :.8lm/W VFV : 3.2lm/W VFR :.8lm/W Sorted by luminous intensity and wavelength and taped according to rank. Corresponding to surface mounter. Corresponding to reflow soldering and manual soldering. Taping dimensions ESD Recommended Applications 2,000pcs(standard) per reel in a 8mm width tape. Reel diameter : φ80mm AlGaInP:2kV (HBM) SW lighting for car indicators, meter panel, car audio and heater control, etc InGaN:kV (HBM) Page

2 Color Variations and Luminous Intensity (Ta=25 ) Part No. Material Emitted Color Lens Color Dominant Wavelength λd (nm) Luminous Intensity Iv (mcd) Luminous Flux φv(mlm) TYP. I F MIN. MAX. I F TYP. I F VUB5W InGaN Blue VUG5W InGaN , Green VYBG5W AlGaInP Yellow VYPY5W AlGaInP Green Water Clear VFY5W AlGaInP Yellow , VFA5W AlGaInP Orange , VFV5W AlGaInP Red VFR5W AlGaInP , Note : The luminous intensity(i v ) and dominant wavelength (λd) above are the setup values of the sorting machine. (Tolerance : I V ±%, λd... ±nm) Page 2

3 Absolute Maximum Ratings (Ta=25 ) Absolute Maximum Ratings Item Symbol Unit VUB VUG VYBG VYPY VFY VFA VFV VFR Power Dissipation P d mw Forward Current I F ma Pulse Forward Current I FRM ma Derating (Ta=75 or higher) I F ma/ I FRM ma/ Reverse Voltage V R V Operating Temperature T opr -40~ +0 Storage Temperature T stg -40~ + -40~+20 IFRM Measurement condition : Pulse Width ms., Duty /20. 2 Temperature Condition: Ta= or higher. Thermal Characteristics Ratings Item Symbol Unit VUB VUG VYBG VYPY VFY VFA VFV VFR Junction Temperature (MAX.) T j Thermal Resistance (TYP.) (Junction/ ambient) Thermal Resistance (TYP.) (Junction/ Solder Point) R (th j-a) /W R (th j-s) /W Rth(j-a) Measurement Condition / Substrate: FR4(t=.6mm) Pattern Size: 6mm Page 3

4 Electro-Optical Characteristics (VUB,VUG) (Ta=25 ) Item Symbol Characteristic Ratings Unit Conditions VUB VUG TYP Forward Voltage I F =ma V F V MAX Reverse Current V R =5V I R MAX. 0 0 μa Peak Wavelength I F =ma λ p TYP nm Dominant Wavelength Spectral Line Half Width I F =ma λ d TYP nm I F =ma λ TYP nm Half Intensity Angle I F =ma 2θ/2 TYP deg. Note: The dominant wave length (λd) above is the setup value of the sorting machine. (Tolerance : λd ±nm) Electro-Optical Characteristics(VYBG, VYPY, VFY, VFA, VFV, VFR) (Ta=25 ) Characteristic Rating Item Symbol Unit Conditions VYBG VYPY VFY VFA VFV VFR TYP Forward Voltage I F =20mA V F V MAX Reverse Current V R =5V I R MAX μa Peak Wavelength I F =20mA λ p TYP nm Dominant Wavelength Spectral Line Half Width I F =20mA λ d TYP nm I F =20mA λ TYP nm Half Intensity Angle I F =20mA 2θ/2 TYP deg. Note: The dominant wave length (λd) above is the setup value of the sorting machine. (Tolerance : λd ±nm) Page 4

5 Luminous Intensity Rank (Ta=25 ) Standard Chart(Unit: mcd) Rank I V (mcd) VUB VUG VYBG VYPY VFY VFA VFV VFR MIN. MAX. I F =ma I F =20mA B B B B B8 B BX BY BZ 82 0 C 0 20 C C C2 C2 C C C C C C7 C7 C7 C7 C C8 C CX CX CX CY CZ 820,000 D,000,200 D D D D2,200,500 D3,500,800 D3 D4,800 2,200 D4 D5 2,200 2,700 D6 2,700 3,300 D7 3,300 3,900 D8 3,900 4,700 D9 4,700 5,0 Limited width of luminous intensity rank is from Min.4 rank width Page 5

6 Color Tone Groups (λd) 450nm 500nm VUB Type 470nm ( unit: nm ) Tolerance: +/-nm VUB Type (I F =ma) A B C D MIN MAX VUG Type (I F =ma) A B C D MIN MAX (Ta=25 ) 550nm 0nm 650nm VUG Type 530nm VYBG Type 562nm VYPY Type 572nm VFY Type 590nm VFA Type 5nm VFV Type 65nm VFR Type 626nm VYBG Type (I F =20mA) B C D MIN MAX VYPY Type (I F =20mA) A B C MIN MAX VFY Type (I F =20mA) C D E F MIN MAX VFA Type (I F =20mA) A B C D MIN MAX VFV Type (I F =20mA) B C D MIN MAX VFR Type (I F =20mA) A B C MIN MAX Limited width of color tone rank is from Min.3 to Min.4 rank width. (It changes with product.) Page 6

7 Characteristics Chart (VUB,VUG) Spectral Distribution vs. Wavelength Spatial Distribution Example.2 VUB Condition:I F =ma VUG Ta=25 X-direction Wavelength[nm] Forward Voltage vs. Forward Current Forward Current vs Forward Current I F (ma) VUB,VUG VUB,VUG Forward Voltage : V F (V) Forward Current : I F (ma) Page 7

8 Characteristics Chart (VUB,VUG) Derating Ambient Temperature vs. Maximum Forward Current Ambient Temp. vs. Repeatition Frequency: f 50Hz.0 Condition:I F =ma Maximum Forward Current : I F MAX. (ma) Duty=5% Duty=% Duty=20% Duty=50% DC.0 VUB VUG 0-40 Ambient Temperature : Ta ( ) Ambient Temp. : Ta ( ) Dynamic Drive Rating Duty cycle vs. Maximum Forward Current Pulse Width vs. Maximum Tolerable Peak Current 0 Ambient Temp. : Ta=25 Maximum Forward Current : I FMAX. (ma) I F Peak MAX./I F DC MAX. 2.4 khz khz 0Hz 50Hz Duty (%) Pulse Width : tw (μs ) Page 8

9 Characteristics Chart(VYBG,VYPY) Spectral Distribution vs. wavelength Spatial Distribution Example.2.0 VYBG VYPY Condition:I F =20mA Ta=25 X-direction VYBG 0 VYPY Wavelength[nm] Forward Voltage vs. Forward Current Forward Current vs. 0.5 Forward Current I F (ma) VYPY VYPY VYBG VYBG VYPY VYBG Forward Voltage : V F (V) Forward Current : I F (ma) Page 9

10 Characteristics Chart(VYBG,VYPY) Derating Ambient Temp. vs. Maximum Forward Current Ambient Temp. vs. 20 Repetition Frequency:f 50Hz.0 Condition:I F =20mA Maximum Forward Current : I FMAX. (ma) Duty=5% Duty=% Duty=20% Duty=50% DC.0 VYPY VYBG Ambient Temp. : Ta ( ) Ambient Temp. : Ta ( ) Dynamic Drive Rating Duty cycle vs. Maximum Forward Current Pulse Width vs. Maximum Tolerable Peak Current 0 Ambient Temp. : Ta=25 Maximum Forward Current : I FMAX. (ma) I F Peak MAX./I F DC MAX. 3.3 khz khz 0Hz 50Hz 0 Duty (%) Pulse Width : tw (μs ) Page

11 Characteristics Chart(VFY,VFA,VFV,VFR) Spectral Distribution vs. Wavelength Spatial Distribution Example Condition:I F =20mA Ta=25 X-direction Wavelength[nm] Forward Voltage vs. Forward Current Forward Current vs. 0.5 Forward Current I F (ma) VFV, VFR VFY,VFA,VFV,VFR VFY,VFA Forward Voltage : V F (V) Forward Current : I F (ma) Page

12 Characteristics Chart(VFY,VFA,VFV,VFR) Derating Ambient Temp. vs. Maximum Forward Current Ambient Temp. vs. 20 Repetition Frequency:f 50Hz.0 Condition:I F =20mA Maximum Forward Current : I FMAX. (ma) Duty=5% Duty=% Duty=20% Duty=50% DC.0 VFA VFY VFV,VFR Ambient Temp. : Ta ( ) Ambient Temp. : Ta ( ) Dynamic Drive Rating Duty cycle vs. Maximum Forward Current Pulse Width vs. Maximum Tolerable Peak Current 0 Ambient Temp. : Ta=25 Maximum Forward Current : I FMAX. (ma) I F Peak MAX./I F DC MAX. 3.3 khz khz 0Hz 50Hz 0 Duty (%) Pulse Width : tw (μs ) Page 2

13 Package Dimensions (Unit: mm) Weight: (7.8)mg Recommended Soldering Pattern (Unit: mm) Taping Specification Surface Mount Reverse Mount Part No. : V 5W -TR (Surface Mount) Part No. : V 5W -RR Quantity: 2,000pcs/ reel(standard) Quantity: 2,000pcs/ reel(standard) (Unit: mm) (Reverse Mount) Page 3

14 Reflow Soldering Conditions ) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. Manual Soldering Conditions Iron tip temp. Soldering time and frequency s time (MAX.) (MAX.) (MAX.) Page 4

15 Reliability Testing Result Reliability Testing Result Applicable Standard Testing Conditions Duration Failure Room Temp. Operating Life High Temp. Operating Life Low Temp. Operating Life Wet High Temp. Operating Life Wet High Temp. Storage Life Thermal Shock Thermal Shock Operating High Temp. Storage Life Low Temp. Storage Life Cycled Temp. Humidity Life Resistance to Reflow Soldering Electric Static Discharge (ESD) Vibration, Variable Frequency Reference test 470/0() 470/0() 470/0() 470/0(2) 470/0(3) 470/0(5) 470/0(5) 470/200(20) 470/200(202) 470/200(203) 470/300(30) 470/300(304) 470/400(403) Ta = 25, IF = Maxium Rated Current,000 h 0/20 Ta = Maximum Rated Operating Temperature, IF = Derating Value,000 h 0/20 Ta = -40, I F = Maxium Rated Current,000 h 0/20 Ta =, 90%, IF = Maxium Rated Current,000 h 0/20 Ta =, 90%,000 h 0/20 Ta = -40 ~ Maximum Rated Storage Temperature (each 5min.) Ta = -40 (off) ~ 85 (I F = Derating Value on), (each 5min.),000 cycles 0/20,000 cycles 0/20 Ta = Maximum Rated Storage Temperature,000 h 0/20 Ta = Minimum Rated Storage Temperature,000 h 0/20 Ta = -30 (2h) ~ 80, 95%(2h), 8h/cycle, I F = Derating Value, 5min on-off Moisture Soak : 30, 70%, 72h Preheat : 50 ~ 80 (20s Max.) Soldering Temp. : 2 (5s) 30 cycles 0/20 Twice 0/20 C = 0pF, R2 =.5KΩ, ±2,000V once each polarity 0/ 98.m/s 2 (G), 0 ~ 2KHz, 20min, XYZ each direction 2 h 0/ Failure Criteria Items Symbols Conditions Failure criteria Luminous Intensity Forward Voltage Reverse Current Iv VF IF Value of each product Luminous Intensity IF Value of each product Forward Voltage VR = Maximum Rated Reverse Voltage V Cosmetic Appearance - - IR Testing Min. Value < Spec. Min. Value x 0.5 Testing Max. Value Spec. Max. Value x.2 Testing Max. Value Spec. Max. Value x 2.5 Occurrence of notable decoloration, deformation and cracking Page 5

16 Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet ) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the Foreign Exchange and Foreign Trade Control Law, it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: Page 6