Product Selector Guide Low Power Adapter/Charger Products
|
|
- Jean Park
- 6 years ago
- Views:
Transcription
1 Product elector Guide Low Power Adapter/Charger Products November 207
2 Product elector Guide R Innowitch -CP Innowitch-CE Low Pwr Adpt/Chrg Chart 57 Linkwitch -HP Linkwitch-4 PR Linkwitch- Linkwitch-CV W W 5 W 7 W 8 W 9 W 0 W 4 W 6 W 8 W 20 W 65 W Package esign/pin Layout Improves Reliability Wide package RAIN OURCE creepage reduces probability of arcing Important for high pollution degree environments and forced air cooling Optimal pin arrangement allows compliance with safety agency adjacent pin short-circuit test Packages below are RoH compliant Package O-8 P Package PIP-8 E Package eip-7c eip-7g K Package eop-6b K Package eop -2 V Package eip-2 C Package InOP-24 PI PI PI PI PI PI-49a PI O-8C PIP-8C PI PI
3 IC Product Tables Linkwitch-CV Adapters up to 0.5 W Product 2 Continuous Output Power (W) Continuous Output Power (W) Adapter Adapter 20 ± 5% LNK62P/ LNK624P/ LNK625P/ LNK626P/ Additional Features: 7 internal MOFET rating elf-powered ON/OFF control Hysteretic over-temperature protection Power limiting Frequency jitter reduces EMI Ecomart low standby/no-load power consumption Notes:. Minimum continuous power in a typical non-ventilated enclosed adapter measured at +50 C ambient. 2. Packages: P: IP-8C, : O-8C. Linkwitch- Charger/Adapters up to 0 W,2,,4 Product (O-8C) Package Adapter (W) LNK6404 / LNK LNK6405 / LNK645 / LNK6425 LNK6406 / LNK646 / LNK6426 / LNK646 / LNK6446 LNK6407 / LNK647 / LNK Additional Features: Compensates for transformer inductance tolerances Compensates for input line voltage variations Compensates for cable voltage drop Compensates for external component temperature variations Very accurate IC parameter tolerances using proprietary trimming technology Frequency jittering greatly reduces EMI filter cost Even tolerances achievable with external resistor selection/ trimming Programmable switching frequency up to 85 khz to reduce transformer size Minimum operation frequency fixed to improve transient load response Product 5 LNK6407K / LNK647K / LNK6427K LNK6408K / LNK648K / LNK6428K / LNK6448K LNK6408E / LNK648E / LNK6428E / LNK6448E E (eip-7c) and K (eop-2b) Packages Adapter (W) Notes:. Assumes minimum input C voltage >90 VC, K P (Recommend K P.5 for accurate CC regulation), η >78%, MAX <55%. 2. Output power capability is reduced if a lower input voltage is used.. Minimum continuous power with adequate heat sink measured at 50 C ambient with device junction below 0 C. 4. Assumes bias winding is used to supply BYPA pin. 5. Package: : O-8C, E: eip-7c, K: eop-2b.
4 IC Product Tables Linkwitch-4 Charger/Adapter BJT rivers up to 5 W Product 2, Adapter (W) LNK40x2 6.5 LNK40x 8 LNK40x 0 LNK40x4 5 Notes:. Minimum continuous power in a typical non-ventilated enclosed adapter measured at +50 C ambient, device T J 00 C. 2. Cable compensation factor. x = 0 (no cable compensation), x = (% cable compensation) x = 2 (6% cable compensation). Package: : O-8, : OT-2-6. Additional Features: ynamic base drive technology provides flexibility in choice of BJT transistor by dynamically optimizing BJT switching characteristics Extends RBOA of BJT ramatically reduces sensitivity to BJTgain Compensates for transformer inductance tolerances Compensates for input line voltage variations Compensates for cable voltage drop Compensates for external component temperature variations Very accurate IC parameter tolerances using proprietary trimming technology Frequency up to 65 khz to reduce transformer size The minimum peak current is fixed to improve transient load response Linkwitch-HP Adapters up to 25 W Product 2 Heat ink Adapter (W) LNK6xxK/V PCB-W 9 LNK6xx4K/V PCB-W LNK6xx5K/V PCB-W LNK6xx6K/V PCB-W 5 LNK6xx7K/V PCB-W 9 LNK6xx8K/V PCB-W 2 LNK6xx9K/V PCB-W 25 Additional Features: Ecomart energy efficient Multi-mode control maximizes efficiency No-load consumption below 0 mw at 20 (LNK67xx) >75% efficiency with W input at 20 >50% efficiency with 0. W input at 20 High design flexibility for low system cost ramatically simplifies power supply designs Eliminates optocoupler and all secondary control circuitry ±5% or better output voltage tolerance 2 khz operation reduces transformer and power supply size Accurate programmable current limit Compensation over line limits overload power Frequency jittering reduces EMI filter cost Notes:. PCB heat sink with wave soldering. 2. Packages: E: eip-7c, K: eop-2b, V: eip-2b. 4
5 IC Product Tables Innowitch-CE Best in Class Efficiency, No-Load, Fast Transient, Chargers up to 65 W 20 ± 5% Product Adapter Open Open Adapter (W) Frame 2 (W) Frame 2 INN62C INN6C INN64C INN65C INN66C INN67C INN68C Notes:. Minimum continuous power in a typical non-ventilated enclosed typical size adapter measured at 40 C ambient. Max output power is dependent on the design. With condition that package temperature must be < = 25 C. 2. Minimum peak power capability.. Package: InOP-24. Additional Features: Up to 94% efficiency across full load range Incorporates a multi-mode Quasi-Resonant (QR) / CCM flyback controller, 6 MOFET, secondary-side sensing and synchronous rectification driver Integrated FluxLink, HIPOT-isolated, feedback link Exceptional CV/CC accuracy, independent of transformer design or external components Adjustable accurate output current sense using external output sense resistor Innowitch-CP Constant Power Profile for UB P / QC Applications up to 65 W 20 ±5% Product 2, Adapter Open Adapter Open (W) Frame 2 (W) (W) Frame 2 (W) INN264C/274C INN265C/275C INN266C/276C INN277C INN267C INN268C Additional Features: Up to 94% efficiency across full load range Incorporates a Quasi-Resonant (QR) / CCM flyback controller, 6 MOFET (INN26x) or 7 MOFET (INN27x), secondary-side sensing and synchronous rectification driver Integrated FluxLink, HIPOT-isolated, feedback link upports fast charge protocols such as UB P/QC 4.0 Constant Power (CP) Profile minimizes charging time with continuous adjustment of output current and voltage Exceptional CV/CC/CP accuracy, independent of transformer design or external components External I resistor allows custom CC programming Instantaneous transient response with 0%-00%-0% load step Notes:. Lowest maximum continuous power in a typical non-ventilated enclosed adapter measured at 40 C ambient. (package temperature < 25 C). 2. Minimum peak power capability.. Package: InOP-24. 5
6 esign Examples Linkwitch-CV Constant Voltage Adapter (RR-20) 6 W, 5 V,.2 A OUTPUT, INPUT, FLYBACK POWER UPPLY RF 2 W µf kω 6.8 µf 0 Ω 5 F07 Linkwitch-CV LNK625PG kv BP EE NC 5 8 Ω 7 N Ω 28.7 kω 50V 6 N448 50V. µh 000 µf 6 V 470 µf 0V 8.2 kω 5 V,.2 A 820 Ω mh 4.42 kω PI Linkwitch- Constant Voltage, Constant Current OE v6 Compliant UB Charger 5 W, 5 V, A OUTPUT, INPUT, FLYBACK UB POWER UPPLY 2.2 nf C9 2.2 nf mh V, A L RF W B MB0M N 4.7 µf 90 kω 4.7 µf 0 Ω ML BP 2 5 Linkwitch- LNK6426 EE 7 5PH 0 kω. Ω 2 L 2 kω 470 µf 6. V 560 µf 6. V 2.2 kω 0 µh 6 V pf 00 V 8.2 kω 6 V PI
7 esign Examples Linkwitch- Constant Voltage, Constant Current UB Charger 0 W, 5 V, 2 A OUTPUT, INPUT, FLYBACK UB POWER UPPLY B B0-G 000 V kω mh 200 kω 470 pf 2 50 Ω EP7 5 F 6 F 4 B045P5-680 µf 0 V Ferrite Bead ( mm) 680 µf 0 V 2.55 kω 5 V, 2 A J- J-4 L TP F R A t O N TP2 L Ferrite Bead ( mm) 5 µf 2 ML Linkwitch- LNK6448K BP 44.2 kω 0 kω 2.4 Ω ML 2.7 kω PI
8 esign Examples Linkwitch-4 Constant Voltage, Constant Current CoC v5 and OE v6 Compliant UB mart Phone Charger (RR-462) 0 W, 5 V, 2 A OUTPUT, INPUT, FLYBACK UB POWER UPPLY L B AB8 F 600 V 2 A 2 J N J2 R 5 Ω 470 µh 4 N.A. 2 µf Bead 0.82 Ω / W 2 µf Linkwitch-4 LNK Ω 0.9 Ω / W C GN 27 MΩ 27 MΩ B E VCC B 0 pf 500 V 2 00 Ω Ω kω 5 6 Q G005 C9 00 pf 2AC Ω 0U pf 00 V 2 N kω 620 Ω kω 560 µf 6. V 5 Ω 560 µf 6. V 5. kω 5 V, 2 A J- J-4 PI Linkwitch-4 Constant Voltage, Constant Current CoC v5 and OE v6 Compliant UB mart Phone Charger 2 W, 2 V, A OUTPUT, INPUT, FLYBACK UB POWER UPPLY mh 470 pf 60 V CY 00 pf 2 4 FL+ 5 Ω 470 pf 220 µf L 9 kω 2 V, A L N F 2 A NT 5 Ω B B06 5 µf 0.68 Ω 5 µf Linkwitch Ω 0.68 Ω C GN 0 MΩ 0 MΩ B E VCC B 220 Ω 00 Ω 0 Q 005 T kω 2 RM6 FL VFY Ω 60 Ω kω kω 6 BAV2W PI
9 esign Examples Linkwitch-HP Constant Voltage, Network Adapter 8 W, 2 V,.5 A OUTPUT, INPUT, FLYBACK POWER UPPLY CY 220 pf 2AC 0 2 kv 5 7 7, 8 B00 60 kω C9 000 µf 680 µf 0 kω 6 V 6 V 2 V,.5 A J L J N J F A RV 00 V 2 5 µf 20 mh 22 µf 00 Ω 5 EE6 6 2 Linkwitch-HP BP CONTROL LNK6775K kω 7.5 kω 6 B 470 pf 2 0 J4 4 5 kω P CP 50 kω 00 nf 00 pf 4.7 µf 8.2 kω 22 µf PI Linkwitch-HP High Efficiency Adapter with ynchronous Rectification (ER-46) 24 W, 2 V, 2 A OUTPUT, INPUT, FLYBACK AAPTER POWER UPPLY nf 2AC L4 0 mh B F206T-G 600 V 4 50 nf 2AC 9 0. MΩ. MΩ nf 4 µf V BZG00TR 0 V 6 µf 20 kω 0 nf 60 V 00 Ω K--F BP 9 RM8 F F BAV2W- 2 Ω 7-F kω 4. kω 680 pf 00 V V2P0-M/86A 9 20 Ω V BZX V Q I82AP Ω 47 kω 4 OPEN 2 26 kω /6 W µf 6 V L5 00 µh kω Q2 MMBT904 V Z2056M0L 5.6 V V, 2 A TP TP4 TP2 RV TP F 2 A Linkwitch-HP U LNK6775E nf 24 kω CONTROL P CP 00 nf 0 pf 00 pf kω 470 nf V GATE V U4 U60R TON EN/OFF GN VCC 4 PI
10 esign Examples Innowitch-CE Constant Voltage, Constant Current Adapter (ER-60) 0 W, 5 V, 2 A OUTPUT, INPUT, FLYBACK UB POWER UPPLY 00 pf 2AC 4.7 µh 2 6 /6 W 5 V, 2 A TP J- R2MA--F 2 R2MA--F kω 0 Ω 5 FL C9 20 Ω.5 nf 200 V µf 6. V 4 kω /6 W J J2 F.5 A t O R R2MA--F 4 R2MA--F 8.2 µf 8.2 µf 22 µf 8.2 kω 6 FL200-7 V CONTROL 4 EE MΩ 2.00 MΩ 47 Ω FW Q I770P--GE R VO BP 7* BAV9W 8* BAV9W GN 0 pf µh BPP 4.7 µf Innowitch-CE INN62C-H02 I 0.05 Ω, /2 W *Optional components PI TP4 J-4 Innowitch-CP UB P Mobile Phone Charger (ER-56) 45 W, 5 V, A, and 9 V, A and 5 V, A OUTPUT, INPUT, FLYBACK UB P POWER UPPLY F 2AC FL 90 µf 90 µf 20 V 20 V Q BC00P0N G 49.9 kω Q2 BC00P0N G 5 V, A 9 V, A 5 V, A B TB20J-TP 600 V 4 mh 600 µh J F 2 A B TB20J-TP 600 V nf R 5 Ω J2 t O 9 µf 9 µf 2.00 MΩ.8 MΩ 5.5 MΩ V Z200M0L 0 V 2.2 nf 60 V Q7 MMBTA06LG kω V MMZ5259BG 50 kω 20 Ω Ω 2 BAV2W-7-F 4 22 µf FL800-7 M400PL-TP FL4 FL6 FL5 V EQ27 CONTROL BPP µf F 47 Ω FW Q I82AP--GE 200 V R Innowitch-CP INN268C-H208 VO 0 Q6 RJ002YNTCL BP GN I 0 pf 6.6 kω 0.0 Ω * 6.8 nf 0* 4.02 kω *Not connected 7.6 kω 8* 8.0 kω kω.00 kω Q4 RJU00N kω KΩ GPIO0 GPIO5 I2C_A_P0.0 I2C_CL_P0. GPIO7 XRE CYP24 U2 V EPA 6 00 nf VCC GPIO6 C C 7 5 V pf 0 pf 6 V 6 V 6 V Q5 RJU00N Ω C9 5 V PI-8409a V OUT 0
11 esign Examples Innowitch-CE ual Output Industrial Power upply (ER-57) 6 W, 2 V, A OUTPUT, INPUT, FLYBACK, NETWORK POWER UPPLY 2.2 nf 2AC EQ2506 F 2 V, A 2.00 MΩ pf kv 68 Ω L Ω 000 pf 60 V 470 µf 6 V FL V 470 µf 6 V.8 kω 2 0 pf C9 22 nf 0 kω TP TP4 L TP N F 2 A R 2.5 Ω 00 nf 275 RV mh 4 2 B GBL V 2 4 µf µf.54 MΩ 2 N NC F 47 Ω Q I490AY 2 90 Ω V BZX79-V2 8.2 V 0 TP2 t O 5.6 kω 22 µf V FW R VO BP GN CONTROL 00 µh BPP 4.7 µf Innowitch-CE INN66C-H02 I Ω /2 W PI
12 Worldwide ales upport Locations World Headquarters 5245 Hellyer Avenue an Jose, CA 958, UA Main: Customer ervice: Worldwide: Americas: usasales@power.com info@power.com AMERICA WET 5245 Hellyer Avenue an Jose, CA 958 UA Tel: Fax: usasales@power.com GERMANY (AC-C/LE ales) Lindwurmstrasse München Germany Tel: Fax: eurosales@power.com INIA (Mumbai) Power Integrations India Private Limited Unit: 06-07, agar Tech Plaza-B akinaka, Andheri Kurla Road Mumbai , Maharashtra, India Tel : Tel 2: indiasales@power.com JAPAN Yusen hin-yokohama -chome Bldg. -7-9, hin-yokohama, Kohoku-ku Yokohama-shi, Kanagawa Japan Phone: japansales@power.com TAIWAN 5F, No. 8, Nei Hu. Rd., ec. Nei Hu ist. Taipei, Taiwan 4, R.O.C. Tel: Fax: taiwansales@power.com On the Web AMERICA EAT 760 McGinnis Ferry Road uite 225 uwanee, GA 0024 Tel: Fax: usasales@power.com CHINA (hanghai) Room 60-60, Charity Plaza No. 88 North Caoxi Road hanghai, PRC Tel: Fax: chinasales@power.com GERMANY (Gate river ales) HellwegForum Ense Germany Tel: gate-drivers.sales@power.com INIA (New elhi) #45, Top Floor Okhla Industrial Area, Phase III New elhi, India Pin 0020 Tel: /5 indiasales@power.com KOREA RM602, 6FL, 22 Teheran-ro 87-gil, Gangnam-gu eoul, 0664, Korea Tel: Fax: koreasales@power.com UNITE KINGOM Building 5, uite 2 The Westbrook Centre Milton Road Cambridge CB4 YG Tel: +44 (0) eurosales@power.com AMERICA CENTRAL 00 undee Road, uite 204 Northbrook, IL Tel: usasales@power.com CHINA (henzhen) 7/F, Hivac Building, No 2 Keji outh 8th Road, Nanshan istrict henzhen, China Zip Code: Tel: Fax: chinasales@power.com ITALY Via Milanese esto an Giovanni (MI) Italy Tel: eurosales@power.com INIA (Bangalore) #, 4th Main Road Vasanthanagar Bangalore India Tel : Tel 2: Fax: indiasales@power.com INGAPORE 5 Newton Road #20-0/0 Goldhill Plaza ingapore, Tel: Cust. vc: Fax: singaporesales@power.com The PI logo, TOPwitch, Tinywitch, ENZero, CALE, CALE-iriver, CALE-iFlex, Qspeed, Peakwitch, LYTwitch, LinkZero, Linkwitch, Innowitch, HiperTF, HiperPF, HiperLC, PA-witch, CAPZero, Clampless, Ecomart, E-hield, Filterfuse, FluxLink, takfet, PI Expert and PI FACT are trademarks of Power Integrations, Inc. Other trademarks are property of their respective companies. 207, Power Integrations, Inc.
Product Selector Guide Low Power Adapter/Charger Products
Product elector Guide Low Power Adapter/Charger Products eptember 2017 Product elector Guide R Innowitch -CP Innowitch-CE Innowitch-EP Low Pwr Adpt/Chrg Chart 090617 Linkwitch -HP Linkwitch-4 PR Linkwitch-
More informationProduct Selector Guide Metering Products
Product elector Guide Metering Products June 201 Product elector Guide Output Characteristics and Power on-isolated Buck or Buck-Boost CV ±% Output Current 0 ma 0 ma 120 ma 20 ma 0 ma Primary-ide Regulation
More informationProduct Selector Guide Low Power Adapter/Charger Products
Product elector Guide Low Power Adapter/Charger Products March 0 Product elector Guide Isolated Flyback Main, Bias, or tandby upply Linkwitch-CV TOPwitch-HX / TOPwitch-JX Tinywitch- PI-miniadapterchart-00
More informationProduct Selector Guide Appliance Power Supply ICs
Product elector Guide Appliance Power upply ICs March 204 Product elector Guide Power Products to upport Low tandby and No-Load Operation Isolated Flyback Main, Bias, or tandby upply Tinywitch-4 CAPZero
More informationProduct Selector Guide Appliance Power Supply ICs
Product elector Guide Appliance Power upply ICs July 2011 Product elector Guide Power Products to upport Low tandby and No-Load Operation Isolated Flyback Main, Bias, or tandby upply CAPZero / ENZero TOPwitch-JX
More informationApplication Note AN-1601 SCALE Family
Application Note AN-1601 SCALE Family Controlling SiC MOSFET Power Switches with SCALE-2 and SCALE-2+ Gate Drivers Cores and SCALE-iDriver Gate Driver ICs Abstract Besides driving conventional Si-based
More informationGeneral Purpose Base Board for SCALE -idriver SID1182K
General Purpose Base Board for SCALE -idriver SID1182K Application Specification Author Document Number Revision 1 A.1 General purpose drives, UPS, solar power and others Suitable for IGBT power modules
More informationProduct Selector Guide Adapter Products
Product elector Guide Adapter Products January 20 Product elector Guide Isolated lyback, Main, Bias, or tandby upply TOPwitch-J Linkwitch-HP Tinywitch- PI-miniHighPwrAdpthart-0 8-2 0 W W 0 W 20 W 2 W 0
More informationGeneral Purpose THT Base Board for Gate Driver Core 2SC0435T
General Purpose THT Base Board for Gate Driver Core 2SC0435T Application Specification Author Document Number Revision 1 A.3 General purpose drives, traction, solar power and others Suitable for IGBT power
More informationGeneral Purpose THT Base Board for Gate Driver Core 2SC0108T
General Purpose THT Base Board for Gate Driver Core 2SC0108T Application Specification Author Document Number Revision 1 A.3 General purpose drives, UPS, solar power and others Suitable for IGBT power
More informationProduct Selector Guide LED Bulb Designs. March V VR1 1.5KE200A D3 UF4007 D4 SB3100 D5 SS14. R kω. R6 162 kω
F.KE200A Product elector Guide E Bulb esigns 3 UF007 F2 3 MB March 20 M8 2 B300 -PH G COTO 3.0 kω 62 kω MMBT390 ZMM29B-7 39 B 9.9 kω 0 µf 6 9.00 kω 3 0 0 Product elector Guide PFC Isolated and on-isolated
More informationGeneral Purpose Base Board for Gate Driver Core 2SC0535T
General Purpose Base Board for Gate Driver Core 2SC0535T Application Specification Author Document Number Revision 1 A.2 General purpose drives, traction, wind power and others Suitable for 3.3kV IGBT
More information2SP0115T2A0-CM450DX-24T Preliminary Data Sheet
2SP0115T2A0-CM450DX-24T Compact, high-performance, plug-and-play dual-channel IGBT driver based on SCALE -2 technology for individual and parallel-connected modules Abstract The SCALE -2 plug-and-play
More informationGeneral Purpose Base Board for Gate Driver Core 2SC0435T
General Purpose Base Board for Gate Driver Core 2SC0435T Application Specification Author Document Number Revision 1 A.4 General purpose drives, traction, solar power and others Suitable for IGBT power
More informationLXA20T600 Qspeed Family
Qspeed Family 6 V, 2 A X-Series PFC Diode Product Summary I F(AVG) 2 A V RRM 6 V Q RR (Typ at 1 C) 14 nc I RRM (Typ at 1 C). A Softness t b /t a (Typ at 1 C).4 Pin Assignment General Description This device
More information2SP0115T2A0-12 Preliminary Data Sheet
2SP0115T2A0-12 Compact, high-performance, plug-and-play dual-channel IGBT driver based on SCALE -2 technology for individual and parallel-connected modules Abstract The SCALE -2 plug-and-play driver 2SP0115T2A0-12
More informationGeneral Purpose Base Board for Gate Driver Core 2SC0115T
General Purpose Base Board for Gate Driver Core 2SC0115T Application Specification Author Document Number Revision 1 A.3 General purpose drives, UPS, solar power and others Suitable for IGBT power modules
More informationSC1117DG. Energy-Efficient, Low Power Off-Line Switcher IC. Product Highlights. Description
C1117DG Energy-Efficient, Low Power Off-Line witcher IC Product Highlights Optimized for Lowest ystem Cost Fully integrated auto-restart for short circuit and open-loop protection Frequency jittering greatly
More information2SD300C17A1 Preliminary Datasheet
2SD300C17A1 Preliminary Datasheet Dual-Channel High-quality and Low-cost SCALE -2 Driver Core Abstract The SCALE -2 dual-driver core 2SD300C17A1 is a second source to Infineon's 2ED300C17-S and 2ED300C17-
More information1.2kV and 1.7kV Dual 140x130mm IGBT Power Modules with Gate Driver Core 2SC0435T
1.2kV and 1.7kV Dual 140x130mm IGBT Power Modules with Gate Driver Core 2SC0435T Application Specification Author Document Number Revision 1 A.1 2-level topology for traction, solar power, general purpose
More informationLNK574/576 LinkZero-LP
LinkZero-LP Zero No-Load or Zero tandby Consumption with up to 1 mw Output Load Product Highlights Lowest ystem Cost with Zero tandby (1 mw Output Power) Automatically enters low consumption power-down
More information1SP0350V2A0-45 Target Data Sheet
1SP0350V2A0-45 Target Data Sheet High-performance, plug-and-play single-channel IGBT driver based on SCALE -2 technology for IGBT modules and Press-Packs in 2-level, 3-level and multilevel converter topologies
More informationLNK LinkSwitch-XT Family
Linkwitch-XT Family Energy Efficient, Low Power Off-Line witcher IC Product Highlights Optimized for Lowest ystem Cost Proprietary IC trimming and transformer construction techniques enable Clampless designs
More informationCHY101 ChiPhy Family. Charger Interface Physical Layer IC with Output Overvoltage Protection. Product Highlights. Description
ChiPhy Family Charger Interface Physical Layer IC with Output Overvoltage Protection Product Highlights Supports Quick Charge 2.0 Class A specification 5 V, 9 V, and 12 V output voltage USB battery charging
More informationSEN SENZero Family
Family Zero 1 Loss High Voltage Sense Signal Disconnect IC Product Highlights Features and Performance Eliminates significant standby losses Disconnects unnecessary circuit blocks during standby, remoteoff,
More informationLNK LinkSwitch-CV Family
Linkwitch-CV Family Energy-Efficient, Off-line witcher with Accurate Primary-side Constant-Voltage (CV) Control Product Highlights ramatically implifies CV Converters Eliminates optocoupler and all secondary
More informationLNK LinkZero-AX
LinkZero-AX Zero tandby Consumption Integrated Off-Line witcher Product Highlights Lowest ystem Cost with Zero tandby Consumption imple system configuration provides zero consumption standby/ power-down
More informationWide Range High-Voltage DC Input LNK3604 (C BP. = 1.0 mf) LNK3604. = 0.1 mf)
Linkwitch-XT2 Family Energy Efficient, Low Power Off-Line witcher IC With Integrated ystem Level Protection Product Highlights Easy to esign Lowest component count switcher solution electable device current
More information2SC0435T2F1-17 and 2SC0435T2F1C-17 Preliminary Datasheet
2SC0435T2F1-17 and 2SC0435T2F1C-17 Preliminary Datasheet Dual-Channel SCALE -2+ IGBT and MOSFET Driver Core Abstract The SCALE -2+ dual-driver core 2SC0435T2F1-17 (Connector pin length of 5.84mm; increased
More informationLNK302/ LinkSwitch-TN Family
Linkwitch-TN Family Lowest Component Count, Energy-Efficient Off-Line witcher IC Product Highlights Cost Effective Linear/Cap Dropper Replacement Lowest cost and component count buck converter solution
More informationLQA30T150C, LQA30B150C Qspeed Family
Qspeed Family 1 V, 3 A Common-Cathode Diode Product Summary I F(AVG) per diode 1 A V RRM 1 V Q RR (Typ at 12 C) 31. nc I RRM (Typ at 12 C) 1.82 A Softness t b/t a (Typ at 12 C). Pin Assignment General
More informationApplication Note AN-60 LYTSwitch-0 Family
Application Note AN-60 Family esign Guide Introduction The family combines a high-voltage power MOFET with an ON/OFF controller into a single device. parts are completely self-powered from the RAIN pin,
More informationProduct Selector Guide LED Tube and Ballast Designs
Innovation in power conversion Product elector Guide E Tube and Ballast esigns February 08 YTwitch- COTO Product elector Guide TIAC imming, PFC, Isolated and on-isolated Flyback, Buck, and Buck-Boost YTwitch-
More informationTNY253/254/255 TinySwitch Family
Tinywitch Family This product is not recommended for new designs. Energy Efficient, Low Power Off-line witchers Product Highlights Lowest Cost, Low Power witcher olution Lower cost than RCC, discrete PWM
More informationLNK64x4-64x8 LinkSwitch-3 Family
LinkSwitch-3 Family Energy-Efficient, Accurate Primary-Side Regulation CV/CC Switcher for Adapters and Chargers Product Highlights Dramatically Simplifies CV/CC Converters Eliminates optocoupler and all
More information1SC0450E2A0-45 and 1SC0450E2A0-65 Preliminary Data Sheet
1SC0450E2A0-45 and 1SC0450E2A0-65 Preliminary Data Sheet Single-Channel Cost-Effective SCALE -2 IGBT Driver Core with Customer- Specific Gate Drive Input for 4500V and 6500V IGBTs Abstract The 1SC0450E2A0-xx
More informationLNK520 LinkSwitch Family
Linkwitch Family Energy Efficient, CV or CV/CC witcher for Very Low Cost Chargers and Adapters This product is not recommended for new designs. Product Highlights Cost Effective Linear/RCC Replacement
More informationLXA08T600C Qspeed Family
LXA8T6C Qspeed Family 6 V, 8 A X-Series Common-Cathode Diode Product Summary I F(AVG) per diode 4 A V RRM 6 V Q RR (Typ at 125 C) 5 nc I RRM (Typ at 125 C) 2.6 A Softness t b /t a (Typ at 125 C).8 Pin
More informationApplication Note AN-67 LYTSwitch-1 Family
Application Note AN-67 LYTwitch-1 Family Design Guide Introduction The LYTwitch -1 family is ideal for inexpensive single-stage high power factor constant current LED bulbs and tubes with outputs up to
More informationLNK LinkSwitch-LP Family
Linkwitch-LP Family Energy Efficient Off-Line witcher IC for Linear Transformer Replacement Product Highlights Lowest ystem Cost and Advanced afety Features Lowest component count switcher Very tight parameter
More informationLYT LYTSwitch-7 Family
LYTwitch-7 Family Phase-Cut Dimmable ingle-tage LED Driver IC with Combined PFC and Constant Current Output for Buck Topology Product Highlights ingle-tage PFC + Accurate CC Output ±3% CC regulation in
More informationLYT LYTSwitch-3 Family
LYTwitch-3 Family ingle-tage LED Driver IC with Combined PFC and Constant Current Output for Outstanding TRIAC Dimming in Isolated and Non-Isolated Topologies Product Highlights Combined ingle-tage PFC
More informationLXA10T600, LXA10FP600 Qspeed Family
Qspeed Family 6 V, 1 A X-Series PFC Diode Product Summary I F(AVG) 1 A V RRM 6 V Q RR (Typ at 12 C) 94 nc I RRM (Typ at 12 C) 3.8 A Softness t b /t a (Typ at 12 C). K A TO-22AC LXA1T6 Pin Assignment A
More informationDesign Example Report 3 W Wide Range Flyback Power Supply using Title LNK304P Specification Input: 57 VAC VAC; Output: 12 V, 250 ma
Design Example Report 3 W Wide Range Flyback Power Supply using Title LNK304P Specification Input: 57 VAC - 580 VAC; Output: 12 V, 250 ma Application Author Document Number Utility Meter Power Integrations
More informationSCALE IGBT and MOSFET Gate Driver Product Overview 2018/
SCALE IGBT and MOSFET Gate Driver Product Overview 2018/2019 www.power.com Power Everywhere As the leading gate driver experts for medium- and high-power inverter systems, Power Integrations continuously
More informationSTANDBY & NO-LOAD ENERGY WASTE IS A WORLDWIDE PROBLEM USA CAN YOUR PRODUCT MEET THE 1 WATT STANDBY EXECUTIVE ORDER?
STANDBY & NO-LOAD ENERGY WASTE IS A WORLDWIDE PROBLEM Billions of dollars of energy are wasted annually due to inefficient standby and excessive no-load power consumption. Recently, governments have developed
More information2SC0106T2A1-12 Preliminary Data Sheet
2SC0106T2A1-12 Dual-channel ultra-compact cost-effective SCALE -2+ driver core Short Description The cost-effective SCALE -2+ dual-driver core 2SC0106T2A1-12 combines unrivalled compactness with broad
More informationLYT LYTSwitch-2 Family
LYTSwitch-2 Family Energy-Efficient, Accurate Primary-Side Regulation CC/CV Switcher for LED Lighting Applications Product Highlights Accurate CC Regulation, Meets ±3% in a Typical Design 1 Controller
More informationLQA20T200C, LQA20N200C Qspeed Family
Qspeed Family 2 V, 2 A Common-Cathode Diode Product Summary I F(AVG) per diode 1 A V RRM 2 V Q RR (Typ at 12 C) 48.4 nc I RRM (Typ at 12 C) 3.29 A Softness t b/t a (Typ at 12 C).34 Pin Assignment General
More informationReference Design Report for a General Purpose Base Board for Using SCALE idriver
Title Specification Applications Author Document Number Reference Design Report for a General Purpose Base Board for Using SCALE idriver SID1183K Up to 1200V DC-link Voltage General Purpose Drives, UPS,
More informationLXA03T600, LXA03B600 Qspeed Family
Qspeed Family 6 V, 3 A X-Series PFC Diode Product Summary I F(AVG) 3 A V RRM 6 V Q RR (Typ at 12 C) 43 nc I RRM (Typ at 12 C) 2.3 A Softness t b /t a (Typ at 12 C).9 A A TO-22AC LXA3T6 Pin Assignment A
More informationLXA04T600, LXA04B600 Qspeed Family
Qspeed Family 6 V, 4 A X-Series PFC Diode Product Summary I F(AVG) 4 A V RRM 6 V Q RR (Typ at 125 C) 5 nc I RRM (Typ at 125 C) 2.6 A Softness t b /t a (Typ at 125 C).8 A TO-22AC LXA4T6 Pin Assignment A
More informationLQA16T300 Qspeed Family
Qspeed Family 3 V, 16 A Q-Series Diode Product Summary I F(AVG) 16 A V RRM 3 V Q RR (Typ at 12 C) 44 nc I RRM (Typ at 12 C) 2.6 A Softness t b /t a (Typ at 12 C).7 Pin Assignment A C TO-2AC RoHS Compliant
More informationLQA60A300C Qspeed Family
Qspeed Family 3 V, 6 A Q-Series Common-Cathode Diode Product Summary I F(AVG) per diode 3 A V RRM 3 V Q RR (Typ at 125 C) 53 nc I RRM (Typ at 125 C) 2.85 A Softness t b /t a (Typ at 125 C).6 A1 K A2 Pin
More informationDesign Example Report
Design Example Report Title Specification Application Author Document Number 2.2W Charger using LNK501P Input: 198 253 VAC Output: 3.6V / 0.6 A Cell Phone Charger Applications Department DER-15 Date February
More informationTOP209/210 TOPSwitch Family Three-terminal Off-line PWM Switch
TOP29/21 TOPSwitch Family Three-terminal Off-line PWM Switch Product Highlights Cost Effective Switcher for Low Power Applications Replaces linear power supplies Replaces discrete switcher and 2 to 5 components
More informationApplication Note AN-301 Qspeed Family
Application Note AN-301 Qspeed Family Reverse Recovery Charge, Current and Time Abstract When a power diode is quickly reverse biased while it is conducting a high forward current (hard switching), a finite
More informationDesign Example Report
Design Example Report Title Specification Application Author Document Number 4.8 W Buck-Boost Converter Using LNK306P Input: 85-135 VAC Output: -24 V / 0.2 A Home Appliance Applications Department DER-59
More informationDesign Example Report
Design Example Report Title Specification Application Author Document Number 9W power supply using TNY267P Input: 85 265 VAC Output: 5V/0.75A, 3.3V/0.5A, 12V/100mA, -12V/10 ma, -23V/10 ma, Floating 3V/100
More informationTOP TOPSwitch-II Family
TOPwitch-II Family Three-Terminal Off-Line PWM witch This product is not recommended for new designs. Product Highlights Lowest cost, lowest component count switcher solution ost competitive with linears
More informationInnovation in power conversion. Product Selector Guide AC-DC Products
Innovation in power conversion Product Selector Guide AC-DC Products April 2016 About Power Integrations Power Integrations is the leading supplier of high-voltage analog integrated circuits used in energy-efficient
More informationSID1102K 1200 V SCALE-iDriver Family
+ - + - SID1102K 1200 V SCALE-iDriver Family Up to 5 A Single Channel IGBT/MOSFET Gate Driver Providing Reinforced Isolation up to 1200 V IGBT and MOSFET Product Highlights Highly Integrated, Compact Footprint
More informationPRIMARY SIDE CONTROL IC FOR OFF-LINE BATTERY CHARGERS AP3706 General Description. Features
General Description The AP3706 is a high performance AC/DC power supply controller for battery charger and adapter applications. The device uses Pulse Frequency Modulation (PFM) method to build discontinuous
More informationDesign Example Report
Design Example Report Title Specification Application Author Document Number 3W Wide Range Flyback Power Supply using LNK304P Input: 57-580VAC Output: 12V / 250mA Utility Meter Power Integrations Applications
More informationDesign Example Report
Design Example Report Title Specification Application Author Document Number 9W power supply using TNY267P Input: 85 265 VAC Output: 5V/0.56A, 3.3V/0.48A, 12V/100mA, -12V/15mA, -22V/100mA, Floating 4V/100mA
More informationPrimary Side Power Switcher for Off-line SMPS. Features
General Description The consists of a primary side regulation controller and a high voltage transistor, and is specially designed for off-line power supplies within 4W output power. Typical applications
More informationDesign Example Report
Design Example Report Title 5 W Adapter Using LinkSwitch TM -CV LNK625DG Specification Input: 85 VAC 265 VAC; Output: 5 V / 1 A Application Author Document Number Adapter Applications Engineering Department
More informationLinkSwitch-HP Family. Energy Efficient, High-Power Off-Line Switcher with Accurate Primary-Side Regulation (PSR) Product Highlights
Family Energy Efficient, High-Power Off-Line Switcher with Accurate Primary-Side Regulation (PSR) Product Highlights EcoSmart - Energy Efficient Multi-mode control maximizes efficiency over full load range
More informationMonolithic Power Switcher for Off-line SMPS. Features
General Description The consists of a primary side regulation controller and a high voltage transistor, and is specially designed for off-line power supplies within 1W output power. Typical applications
More informationDesign Example Report
Design Example Report Title Specification Application Author Document Number 60W DC-DC Power Supply using DPA426R Input: 36-72VDC Output: 12V / 5A Distributed Power Architectures Power Integrations Applications
More informationDesign Example Report
Design Example Report Title Specification Application Author Document Number 0.7W Power Supply using LNK353P Input: 95 265 VAC Output: 7V / 0.A TV Back Channel Power Supply Applications Department DER-09
More informationEngineering Prototype Report for EP W Non-Isolated Buck Converter Using LNK304P (LinkSwitch -TN) Title
Title Engineering Prototype Report for EP48 1.4 W Non-Isolated Buck Converter Using LNK304P (LinkSwitch -TN) Specification 85 265 VAC Input, 12 V, 120 ma, 1.44 W Output Applications Author Document Number
More informationDesign Example Report
Design Example Report Title Specification Application Author Document Number 7.5 W TRIAC Dimmable High Efficiency Power Factor Corrected Non-Isolated Buck LED Driver Using LYTSwitch TM -7 LYT7503D 180
More informationDesign Example Report
Title Specification Application Design Example Report 7.8 W Isolated Flyback LED Driver Using LYTSwitch TM -2 LYT2004D 90 VAC 270 VAC Input; 24 V to 60 V, 130 ma Output External Ballast LED Driver Author
More informationInnoSwitch3-CP Family
Family Off-Line CV/CC QR Flyback Switcher IC with Integrated 650 V / 725 V MOSFET, Synchronous Rectification, FluxLink Feedback and Constant Power Profile. For Applications up to 65 W Product Highlights
More informationLNK LinkSwitch-CV Family
Linkwitch-CV Family Energy-Efficient, Off-line witcher with Accurate Primary-side Constant-Voltage (CV) Control Product Highlights ramatically implifies CV Converters Eliminates optocoupler and all secondary
More informationDesign Example Report
Design Example Report Title 10 W Dimmable, High Efficiency (>87%), Power Factor Corrected, Non-Isolated Buck LED Driver Using LYTSwitch TM -7 LYT7503D Specification 195 VAC 265 VAC Input; 84 V, 120 ma
More informationLowest Component Count, Energy-Efficient Off-Line Switcher IC
Linkwitch-TN Family Lowest Component Count, Energy-Efficient Off-Line witcher IC Product Highlights Cost Effective Linear/Cap ropper Replacement Lowest cost and component count buck converter solution
More informationSC1223K InnoSwitch Family
InnoSwitch Family Off-Line C/CC Flyback Switcher IC with Integrated MOSFET, Sync-Rect and Feedback Product Highlights Highly Integrated, Compact Footprint Incorporates flyback controller, 650 MOSFET, secondary-side
More informationProduct Selector Guide AC-DC Products
Product Selector Guide AC-DC Products July 2008 Product Selector Guide AC-DC Products Table of Contents Design Simplification.................... 1 EcoSmart Innovation.................... 2 Technology
More informationDesign Example Report
Design Example Report Title Specification Application Author Document Number 2.2W Charger using LNK501P Input: 90-265 Vac Output: 5.5V / 0.4A Cell Phone Charger Applications Department DER-13 Date February
More informationSCALE-iDriver Family SID11x2KQ
+ - + - SCALE-iDriver Family SID11x2KQ Up to 8 A Single Channel IGBT/MOSFET Gate Driver for Automotive Applications Providing Reinforced Galvanic Isolation Product Highlights Highly Integrated, Compact
More informationReference Design Report for a 1.44 W Non- Isolated Buck Converter Using LinkSwitch TM -TN2 LNK3204D/P/G
Title Specification Application Author Document Number Reference Design Report for a 1.44 W Non- Isolated Buck Converter Using LinkSwitch TM -TN2 LNK3204D/P/G Input: 85 VAC 265 VAC; Output: 12 V, 120 ma
More informationLinkSwitch-LP. Energy Efficient Off-Line Switcher IC for Linear Transformer Replacement LNK Product Highlights
Linkwitch-LP Energy Efficient Off-Line witcher IC for Linear Transformer Replacement Product Highlights Lowest ystem Cost and Advanced afety Features Lowest component count switcher Very tight parameter
More information15 W HVDCP Quick Charge 3.0 Compatible CV/CC Charger
Design Note 15 W HVDCP Quick Charge 3.0 Compatible CV/CC Charger Device Application Input Voltage NCP4371AAC NCP1361EABAY NCP4305D Quick Charge 3.0, Cell Phone, Laptop Charger Output Voltage Output Ripple
More informationSolid-State Lighting Solutions
F 2 2 4007 µf olid-tate ighting olutions F AC-C.5KE200A E river ICs 3 UF4007 eptember 20 4 B300 5 4 RM8 3 2 8 MB20T3G 50 Ω 6 4936 22 µ 50 inkwitch-ph K406EG 3.0 R 62 kω Q3 ZMM5259B-7 39 7 BA2W-7-F 49.9
More informationDesign Example Report
Design Example Report Title Specification Application Author Document Number 4.8W Charger using LNK520P Input: 85 265 VAC 50/60Hz Output: 12V / 400mA UPS Battery Charger Applications Department DER-56
More informationUNISONIC TECHNOLOGIES CO., LTD UC1108 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD LOW-POWER OFF-LINE PRIMARY SIDE REGULATION CONTROLLER DESCRIPTION The UTC UC1108 is a primary control unit for switch mode charger and adapter applications. The controlled
More informationLNK302/ LinkSwitch-TN Family Lowest Component Count, Energy Efficient Off-Line Switcher IC
Linkwitch-TN Family Lowest Component Count, Energy Efficient Off-Line witcher IC Product Highlights Cost Effective Linear/Cap Dropper Replacement Lowest cost and component count buck converter solution
More information1700 V SCALE-iDriver. Up to 8 A Single Channel IGBT/MOSFET Gate Driver Providing Basic Galvanic Isolation for 1700 V IGBT and MOSFET.
+ - + - 17 V SCALE-iDriver Up to 8 A Single Channel IGBT/MOSFET Gate Driver Providing Basic Galvanic Isolation for 17 V IGBT and MOSFET Product Highlights Highly Integrated, Compact Footprint Split outputs
More informationTinySwitch. Flyback Design. Methodology Application Note AN-23. Design Flow. Introduction. Basic Circuit Configuration
Tinywitch Methodology pplication ote -23 TM Flyback Design Introduction This document describes a simple Design Methodology for flyback power supply design using the Tinywitch family of integrated off-line
More informationSID11x2K SCALE-iDriver Family
+ - + - SID11x2K SCALE-iDriver Family Up to 8 A Single Channel IGBT/MOSFET Gate Driver Providing Reinforced Galvanic Isolation Product Highlights Highly Integrated, Compact Footprint Split outputs providing
More informationLNK302/ Lowest Component Count, Energy Efficient Off-Line Switcher IC. Product Highlights. Description OUTPUT CURRENT TABLE 1
Linkwitch-TN Family Lowest Component Count, Energy Efficient Off-Line witcher IC Product Highlights Cost Effective Linear/Cap Dropper Replacement Lowest cost and component count buck converter solution
More informationn Application l Notebook Systems and I/O Power l Digital Set Top Boxes l LCD Display, TV l Networking, XDSL Modem n Typical Application VIN 4.
5297 n General Description The 5297 is a high frequency synchronous stepdown DC-DC converter with built internal power MOSFETs. That provides wide 4.5 to 18 input voltage range and 3A continuous load current
More informationRT8457A. Isolated Secondary-Side LED Lighting Dimmable Current Controller. Features. General Description. Applications. Marking Information
RT8457A Isolated Secondary-Side LED Lighting Dimmable Current Controller General Description The RT8457A is an isolated secondary LED current controller designed specifically for lighting fixtures such
More informationReference Design EBC iw for 12V 600mA Network Adapter Design
Reference Design EBC10011 iw1706-00 for 12V 600mA Network Adapter Design Table of Contents iw1706-00 For Network Adapter Design (AC Input 90 264V AC, Output 12V 600mA) EBC10011 1.0. Introduction...3 2.0.
More informationFeatures. Applications
General Description The is a high performance AC/DC power supply controller for battery charger and adapter applications. The device uses Pulse Frequency Modulation (PFM) method to build discontinuous
More informationDesign Example Report
Design Example Report Title Specification Application Author Document Number 20.4 W Non-Dimmable, High Efficiency (>94% ), and Power Factor Corrected, Non-Isolated Buck LED Driver Using LYTSwitch TM -1
More informationProduct Selector Guide DC-DC Products
Innovation in power conversion 000 p 00 V 7 0 k PoE Interface 0 H A 9,0.9 k 00 k Product elector Guide - Products V V 6 k M 69 k V MAJ 0A 6,7 MMBTAO6 MVAM Q Q U MMBTAO6 eptember 008 k Q 69.8 MMT90 MMBTAO6
More informationOff-Line CV/CC Flyback Switcher IC with Integrated 650 V MOSFET, Sync-Rect, Feedback and Constant Power Profile for USB-PD and QC 3.
Family Off-Line CV/CC Flyback Switcher IC with Integrated 650 V MOSFET, Sync-Rect, Feedback and Constant Power Profile for USB-PD and QC 3.0 Product Highlights Highly Integrated, Compact Footprint Incorporates
More information