SPEAKERS SUBWOOFERS AMPLIFIERS CROSSOVERS. CONTACT VISIT AmericanBassUSA.com. p

Transcription

1 SPEAKERS SUBWOOFERS AMPLIFIERS CROSSOVERS CONTACT VISIT AmericanBassUSA.com p

2 NEO SUBWOOFERS NEO MIDRANGE COMPETITION READY American Bass is proud to introduce the NEO Subwoofer. We designed this woofer to dominate the competition arena. The American Bass NEO Subs represent our ultimate design goal by utilizing a high-level cone, spiders, and neo technology. The NEO Subwoofer has a 3 High Temp made in USA Voice Coil. Our basket and motor have great voice coil cooling capability. We are using a real carbon fiber cone and dust cap. The power handling is 3000 watts RMS, 15,000 watt burp power. Awesome Woofer! NEO 12 NEO SPL SUBWOOFER 3 USA MADE HIGH TEMP VOICE COIL REAL CARBON FIBER CONE 3000 WATTS RMS / WATTS BURP 13 LUG NEODYNIUM MOTOR 15 SPL SUBWOOFER 3 USA MADE HIGH TEMP VOICE COIL REAL CARBON FIBER CONE 3000 WATTS RMS / WATTS BURP 13 LUG NEODYNIUM MOTOR NEO 6.5 PAPER CONE NEODYNIUM MAGNET 250 WATTS RMS 500 WATTS MAX 150Hz 5Khz 4 OHM IMPEDANCE 1.5 VOICE COIL NEO 8 PAPER CONE NEODYNIUM MAGNET 250 WATTS RMS 500 WATTS MAX 100HZ 5KHZ 4 OHM IMPEDANCE 1.5 VOICE COIL COMING SOON! NEO 6x9 s 02 CONTACT VISIT AmericanBassUSA.com CONTACT VISIT AmericanBassUSA.com 03

3 ELITE SERIES E 1244 FS QMS VAS CMS MMS RMS XMAX XMECH DIA SD VD VALUE HZ LITERS UM/N G G/S MM MM MM SQ.M LITERS PARALLEL ELECTRICAL PARAMETERS QES RE OHMS 1.7 LE MH BL TM PE WATTS 1200 ES SERIES SERIES ELECTROMECHANICAL PARAMETERS QTS NO % W/M SPL DB V SPL DB E 1544 FS QMS VAS CMS MMS RMS XMAX XMECH DIA SD VD VALUE HZ LITERS UM/N G G/S MM MM MM SQ.M LITERS PARALLEL ELECTRICAL PARAMETERS QES RE OHMS 1.7 LE MH BL TM PE WATTS 1200 ES SUBWOOFER RMS POWER: 500W MAX POWER: 1000W STITCHED RUBBER SURROUND FIBERGLASS REINFORCED CAP DVC 4 OHM 2.5 ALUMINUM VOICE COIL 65 OZ MAGNET STRUCTURE PVC GASKET RING SPECIFICATIONS FEATURES HEAVY DURABLE STAMPED BASKET WITH BLOCK POWER FINISH FIBER ADDED NON PRESS PAPER CONE HI ROLL HIGH DENSITY FOAM SURROUND WITH SILVER STITCHING 3 HI TEMP 4 LAYER VOICE COIL ON ALUMINUM BOBBIN DOUBLE BLACK POLLY COTTON SPIDERS WITH MIRROR IMAGE LAYOUT SPACED BY SPIDER RING DOUBLE THICK TINSEL STITCHED ON SPIDER RMS POWER MAX POWER FO (HZ) NOMINAL IMPEDANCE SENSITIVITY 1W/1M (DB) FREQUENCY RANGE MAGNET VOICE COIL CONE MOUNTING DEPTH (INCH) MOUNTING DIAMETER (INCH) DOUBLE STACKED 75OZ HIGH GRADE MAGNETS (150OZ TOTAL) 1 PC TECH DEEP BUMPED T YOKE FOR MAXIMUM EXCURSION CHROME FINISH PUSH TERMINALS CUSTOMS TOOLED RUBBER GASKETS RUBBER MAGNET BOOT TO PROTECT MOTOR DUAL 2OHM/4OHM IMPEDANCE 1200 RMS POWER 24OO MAX POWER 500 WATTS 1000 WATTS HZ~500HZ 65OZ 2.5 RUBBER EDGE PAPER CONE ES 1244 SERIES SUBWOOFER RMS POWER: 800W MAX POWER: 1500W STITCHED RUBBER SURROUND FIBERGLASS REINFORCED CAP DVC 4 OHM 2.5 ALUMINUM VOICE COIL 65 OZ MAGNET STRUCTURE PVC GASKET RING SPECIFICATIONS RMS POWER MAX POWER FO (HZ) NOMINAL IMPEDANCE (DB) FREQUENCY RANGE MAGNET VOICE COIL CONE MOUNTING DEPTH (INCH) MOUNTING DIAMETER (INCH) HZ~500HZ 65OZ 2.5 RUBBER EDGE PAPER CONE ELECTROMECHANICAL PARAMETERS QTS NO % W/M SPL DB V SPL DB CONTACT VISIT AmericanBassUSA.com CONTACT VISIT AmericanBassUSA.com 05

4 GODFATHER SERIES SUBWOOFERS SYMPHONY MIDRANGES SYMPHONY 65 (6.5 ) MIDRANGE NOT YOUR EVERYDAY SUBWOOFERS The American Bass Godfather Series are not your everyday subwoofer. These speakers were designed for high SPL. These competition style subwoofers offer high power handling with an air cooling bottom plate. They also feature a 400 oz Magnet, American made 4 flat wire wound high temp coil, multi spider system and a double stitched cone. The Godfather Series is available in 12, 15 and 18. MAGNET 13.5 OZ 4 OHM IMPEDANCE EFFICIENCY 91 DB/SPL 6.5 DIECAST BASKET MAX POWER 250 WATTS 30MM HI-TEMP KSV VOICE COIL PAPER CONE AND RUBBER SURROUND GODFATHER 12 CAST FRAME POWER HANDLING MAGNET SIZE VOICE COIL IMPEDANCE SPEAKER CUT OUT 3000 WATTS RMS 400 OZ 4 USA MADE, HIGH TEMP DVC-1 OHM AND DVC-2 OHM 11.5 SYMPHONY 52 (5.25 ) MIDRANGE GODFATHER 15 CAST FRAME POWER HANDLING MAGNET SIZE VOICE COIL IMPEDANCE SPEAKER CUT OUT 3000 WATTS RMS 400 OZ 4 USA MADE, HIGH TEMP DVC-1 OHM AND DVC-2 OHM 14 MAGNET 12 OZ 4 OHM IMPEDANCE EFFICIENCY 90 DB/SPL 5.25 DIECAST BASKET MAX POWER 200 WATTS 30MM HI- TEMP KSV VOICE COIL PAPER CONE AND RUBBER SURROUND GODFATHER 18 CAST FRAME POWER HANDLING MAGNET SIZE VOICE COIL IMPEDANCE SPEAKER CUT OUT 06 CONTACT WATTS RMS 400 OZ 4 USA MADE, HIGH TEMP DVC-1 OHM AND DVC-2 OHM 17 VISIT AmericanBassUSA.com CONTACT VISIT AmericanBassUSA.com 07

5 SUBWOOFERS DX Series SUBWOOFERS XO Series The XO Series subwoofers are terrific all-around speakers for dual voice-coil setups. There are few subs available today that can match the quality and price of this long-running American Bass classic. The XO Series works flawlessly in enclosures to execute outstanding bass response. DVC 4 ohm, 10 and 12 versions have 80oz magnet and 2 VC, and 15 has an enormous 120oz magnet and 2.5 VC. DX-104 DX-104 Power Handling Peak 600 WATTS Power Handling RMS 300 WATTS 80 OZ Voice Coil High Temp 2 Nominal Impedance SVC-4 Ohm Mounting Depth 5.5 Speaker Hole Cutout 9.2 DX-154 XO-1044 DX-124 DX-124 Power Handling Peak 600 WATTS Power Handling RMS 400 WATTS 80 OZ Voice Coil- High Temp 2 Nominal Impedance SVC-4 Ohm Speaker Hole Cutout 10.9 Mounting Depth 5.9 DX-154 Power Handling Peak 1000 WATTS Power Handling RMS 500 WATTS 120 OZ Voice Coil- High Temp 2.5 Nominal Impedance SVC-4 Ohm Mounting Depth 9 Speaker Hole Cutout 13.9 The DX Series is American Bass`s best-selling subwoofer and continues to be one of our most popular products. Designed for everyday use, this high-quality series offers tons of lowend bass that is second to none. The DX Series subwoofer offers reliability, performance in a variety of situations optimized for the everyday bass enthusiast. SVC 4 ohm, 80 oz magnet, paper cone, dual spider, fat foam surround. Available in 10, 12, and 15 versions. The 10 and 12 versions have a 2 VC, and the 15 version has a 2.5 voice coil and massive 120oz magnet. XO-1044 Power Handling Peak 600 WATTS Power handling RMS 350 WATTS 80 OZ Voice Coil- High Temp 2 Nominal Impedance DVC-4 Ohm Mounting Depth 5.5 Speaker Hole Cutout 9.2 XO-1244 XO-1244 Power Handling Peak 600 WATTS Power handling RMS 400 WATTS 80 OZ Voice Coil- High Temp 2 Nominal Impedance DVC-4 Ohm Mounting Depth 5.9 Speaker Hole Cutout 10.9 XO-1544 XO-1544 Power Handling Peak 1000 WATTS Power handling RMS 500 WATTS 120 OZ Voice Coil- High Temp 2.5 Nominal Impedance DVC-4 Ohm Mounting Depth 9.0 Speaker Hole Cutout

6 SUBWOOFERS XD Series SUBWOOFERS XD Series XD-10 A high-grade subwoofer for tighter bass response and even power output, the thundering low end produced by the XD Series delivers depth with plenty of clarity. The power and feel of this series have made it the best-selling, favorite subwoofer for years. This is an all-around excellent subwoofer that is certain to please most car audio fanatics. The XD 10 and 12 inch subwoofers offer 2.5 voice coil and a 120oz magnet. XD also offers a 15 inch woofer with a 3 voice coil and substantial 170oz magnet. We also offer the 10, 12, and 15 inch sizes in a DVC 2 Ohm. American Bass has recently released an XD 6.5 inch subwoofer, containing a 1.5 coil and 60 oz magnet. One of our most popular XD Series subwoofer, the 8 inch size offers a generous sized 2 voice coil and 90oz magnet. XD-10 Power Handling Peak 900 WATTS Power handling RMS 450 WATTS 120 OZ Voice Coil- High Temp 2.5 Nominal Impedance DVC-4 Ohm and DVC-2 Ohm Mounting Depth 6 Speaker Hole Cutout 6.5 XD-6.5 XD-844 XD-6.5 Power Handling Peak 300 WATTS Power handling RMS 150 WATTS 60 OZ Voice Coil- High Temp 1.5 Nominal Impedance SVC-4 Ohm Mounting Depth 4.25 Speaker Hole Cutout 5.5 XD-844 Power Handling Peak 600 WATTS Power handling RMS 300 WATTS 90 OZ Voice Coil- High Temp 2 Nominal Impedance DVC-4 Ohm Mounting Depth 5.5 Speaker Hole Cutout 7.25 XD-12 XD-12 Power Handling Peak 1000 WATTS Power handling RMS 500 WATTS 120 OZ Voice Coil- High Temp 2.5 Nominal Impedance DVC-4 Ohm and DVC-2 Ohm Mounting Depth 6.5 Speaker Hole Cutout 10.7 XD-15 XD-15 Power Handling Peak 1400 WATTS Power handling RMS 700 WATTS 170 OZ Voice Coil- High Temp 3 Nominal Impedance DVC-4 Ohm and DVC-2 Ohm Mounting Depth 7.7 Speaker Hole Cutout p p

7 SUBWOOFERS TNT Series American Bass has designed a TNT Series subwoofer that offers a cast frame that is made to handle high output with improved power handling and durability. Offered in the 10 and 12 inch versions with a high temp 2.5 high wound voice coil and 120oz magnet. American Bass extensively redesigned the TNT 15 inch with a 3 voice coil and 150oz magnet. The design of the American Bass TNT series of speakers offer multilayer high density foam surround, Flat T-yoke with hi-extended pole piece, and multiple CONEX spiders. Specifically designed with a cooling motor for ultimate power handling and gut wrenching bottom end bass. HEARING PROTECTION RECOMMENDED. SUBWOOFERS Slimline Series The perfect subwoofer for minimally spaced vehicles, the SL Series can produce gutwrenching bottom end in a non-obtrusive, compact design. With these subwoofers, vehicle owners can bring out the same intense sound that larger vehicles can achieve using full sized subwoofers. Be assured that the SL Series modest size takes away nothing from the fullbodied resonance that these subs produce. Ultra-slim subwoofer, 2 high-temperature voice coil, 80oz magnet, dual double-spider, paper cone. Available in 10 and 12 versions DEPTH SL-104 INCH MOUNTING DEPTH SL-124 INCH MOUNTING TNT-1044 TNT-1044 Power Handling Peak 1200 WATTS Power handling RMS 600 WATTS 120 OZ Voice Coil- High Temp 2.5 Nominal Impedance DVC-4 Ohm Mounting Depth 6.3 Speaker Hole Cutout 9.3 TNT-1244 TNT-1544 SL-104 SL-124 TNT-1244 Power Handling Peak 1200 WATTS Power handling RMS 600 WATTS 120 OZ Voice Coil- High Temp 2.5 Nominal Impedance DVC-4 Ohm Mounting Depth 6.69 Speaker Hole Cutout 11.3 TNT-1544 Power Handling Peak 1600 WATTS Power handling RMS 800 WATTS 150 OZ Voice Coil- High Temp 3 Nominal Impedance DVC-4 Ohm Mounting Depth 7.6 Speaker Hole Cutout 13.9 SL-104 Power Handling Peak 500 WATTS Power handling RMS 250 WATTS 80 OZ Voice Coil High Temp 2 Nominal Impedance SVC-4 Ohm Mounting Depth 3.54 Speaker Hole Cutout 9.1 SL-124 Power Handling Peak 500 WATTS Power handling RMS 250 WATTS 80 OZ Voice Coil High Temp 2 Nominal Impedance SVC-4 Ohm Mounting Depth 4.02 Speaker Hole Cutout

8 SUBWOOFERS XFL Series The XFL Series accurately reproduces the best possible sound quality in today s digital music. This specially designed subwoofer executes power and sound that leaves the competition far behind. With its rock-solid structure and clean power output, our reliable XFL subwoofers will make your automobile come alive with power and sound. SUBWOOFERS XFL Series Non-pressed paper cone, 200oz magnet, 3 voice coil, and high-roll foam surround. Available in 10, 12, 15, and 18. All XFL series subwoofers are available in Dual Voice Coil 2 Ohm and 4 Ohm. Since the introduction of the XFL Series subwoofer, it has become one of our mainstream subwoofers. The XFL series has set many world records at different competition arenas. HEARING PROTECTION RECOMMENDED. XFL-12 XFL-12 Power Handling Peak 2000 WATTS Power handling RMS 1000 WATTS 200 OZ Voice Coil- High Temp 3 Nominal Impedance DVC-4 Ohm and DVC-2 Ohm Mounting Depth 7.6 Speaker Hole Cutout 11.3 XFL-10 XFL-18 XFL-10 XFL-15 XFL-18 Power Handling Peak 2000 WATTS Power Handling Peak 2000 WATTS Power handling RMS 1000 WATTS Power handling RMS 1000 WATTS XFL OZ 200 OZ Voice Coil- High Temp 3 Voice Coil- High Temp 3 Power Handling Peak 2000 WATTS Nominal Impedance DVC-4 Ohm and Nominal Impedance DVC-4 Ohm and Power handling RMS 1000 WATTS DVC-2 Ohm DVC-2 Ohm 200 OZ Mounting Depth 7.1 Mounting Depth 11 Voice Coil- High Temp 3 Speaker Hole Cutout 9.3 Speaker Hole Cutout 17 Nominal Impedance DVC-4 Ohm and DVC-2 Ohm Mounting Depth Speaker Hole Cutout

9 SUBWOOFERS XR Series American Bass has designed a XR Series subwoofer for the ultimate low bass enthusiast. Newly re-designed, the wire terminals are all repositioned to one side of the speaker for easy installation. Consisting of a Fiberglass reinforced Cone, Cast frame, and Stitched rubber surround, the XR series will deliver crisp bass surpassing the competition. Offered in 10 and 12 inch sizes, these subwoofers are designed with a 3 dual voice coil and 200 oz magnet. SUBWOOFERS RX Series American Bass has designed a RX Series subwoofer for the everyday bass enthusiast. Newly re-designed, the wire terminals are all repositioned to one side of the speaker for easy installation. Consisting of a Fiberglass reinforced Cone, Cast frame, and Stitched rubber surround, the RX series will deliver crisp bass and superior quality. Offered in 10 and 12 inch sizes, these subwoofers are designed with a 2.5 dual voice coil and 140 oz magnet. XR-1044 RX-1044 XR-1044 Power Handling Peak 2000 WATTS Power handling RMS 1000 WATTS 200 OZ Voice Coil- High Temp 3 Nominal Impedance DVC-4 Ohm Mounting Depth Speaker Hole Cutout 9.2 RX-1044 Power Handling Peak 800 WATTS Power handling RMS 400 WATTS 140 OZ Voice Coil- High Temp 2.5 Nominal Impedance DVC-4 Ohm Mounting Depth Speaker Hole Cutout 9.2 XR-1244 RX-1244 XR Power Handling Peak 2000 WATTS Power handling RMS 1000 WATTS 200 OZ Voice Coil- High Temp 3 Nominal Impedance DVC-4 Ohm Mounting Depth Speaker Hole Cutout 10.7 RX-1244 Power Handling Peak 1200 WATTS Power handling RMS 600 WATTS 140 OZ Voice Coil- High Temp 2.5 Nominal Impedance DVC-4 Ohm Mounting Depth 7.16 Speaker Hole Cutout

10 SUBWOOFERS HD Series Introducing the new HD Series of subwoofers with a non-pressed paper cone, colossal sized 300 oz magnet, 3 inch voice coil and high rolled foam surround. The HD Series of subwoofers are available in dual 1 ohm or dual 2 ohm configurations, in 10, 12, 15, and 18 inch diameters. SYMPHONY COMPONENTS / ABSOLUTELY BRILLIANT SOUND PERFORMANCE / SYMPHONY 5.25 The HD Series of subwoofers are ultra-heavy duty subwoofers designed with gut wrenching power and reliability in mind. The HD Series produces some serious low-end, with enough power to rattle even the most die-hard bass enthusiast. American Bass does not cover rear view mirrors and shattered windshields. HEARING PROTECTION RECOMMENDED. HD-10 HD-10 Power Handling Peak 2000 WATTS Power handling RMS 1000 WATTS 300 OZ Voice Coil High Temp 3 Nominal Impedance DVC-2 Ohm and DVC-1 Ohm Mounting Depth 7.25 Speaker Hole Cutout 9 HD-12 HD-12 Power Handling Peak 4000 WATTS Power handling RMS WATTS 300 OZ Voice Coil High Temp 3 Mounting Depth 8.1 Speaker Hole Cutout 11.3 Nominal Impedance DVC-2 Ohm and DVC-1 Ohm 5 1/4 Diecast Basket Max Power: 200 Watts Paper Cone and Rubber Surround 4 Ohm Impedance 30mm Hi-Temp KSV Voice Coil Crossover LO/HI Pass 2.5KHz 12/12 db Oct Efficiency 90 db/spl 28mm Neodymium Silk Dome Aluminum housing Tweeter SYMPHONY /2 Diecast Basket Max Power: 250 Watts Paper Cone and Rubber Surround 4 Ohm Impedance 30mm Hi-Temp KSV Voice Coil Crossover LO/HI Pass 2.5KHz 12/12 db Oct Efficiency 91 db/spl 28mm Neodymium Silk Dome Aluminum housing Tweeter HD-15 HD-18 SYMPHONY 2.5 HD-15 HD-18 SUPER DOME TWEETER Power Handling Peak 4000 WATTS Power Handling Peak 4000 WATTS V.C SIZE: 28mm Power handling RMS 2000 WATTS Power handling RMS 2000 WATTS POWER HANDLING: 150 WATTS MAX 300 OZ 300 OZ FREQUENCY RESPONSE: 2K-22KHz Voice Coil- High Temp 3 Voice Coil High Temp 3 EFFICIENCY: 92 db Nominal Impedance DVC-2 Ohm and Nominal Impedance DVC-2 Ohm and IMPEDANCE: 4 OHM DVC-1 Ohm DVC-1 Ohm Mounting Depth 9 Mounting Depth Speaker Hole Cutout 13.9 Speaker Hole Cutout 17 19

11 MARINE PRODUCTS Marine Series American Bass marine speaker and components are specially designed for open-air boating experience ensuring outstanding sound quality. American Bass specifically designed marine products not only to look miraculous, but also have superior sound quality that blows the competition out of the water. American Bass marine speakers are tested for salt, UV and other harsh elements in the water that exceed the marine industry standards. We offer 6.9, 6.5, and 7.2 as full range and 10 as a subwoofer. To compliment the speakers, we have designed 2 hybrid amplifiers for the full range and subwoofer speaker systems. AB-MRE 6.5F 6.5 Coaxial -Components Impedance 4 Ohm Max Power 200 Watts Sensitivity (db/m/w ) 86 db Frequency Response 70-50k Hz Voice Coil 1 EISV-Copper Wire Top Plate 4mm Magnet 10 Oz AB-MRE 7F MARINE AMPLIFIERS Marine Series 7 Coaxial -Components Impedance 4 Ohm Max Power 200 Watts Sensitivity (db/m/w ) 88 db Frequency Response 60-20k Hz Voice Coil 1 EISV-Copper Wire Top Plate 4mm Magnet 15 Oz AB-MRE 6.9 AB-MRE Coaxial -Components Impedance 4 Ohm Max Power 200 Watts Sensitivity (db/m/w ) 88 db Frequency Response 60-20k Hz Voice Coil 1 EISV-Copper Wire Top Plate 4mm Magnet 15 Oz AB-MRE 10S MR MAX 1 Ohm MAX 2 Ohm Impedance Input HPF LPF Subsonic Filter Bass Boost Frequency Response Signal to Noise Ratio 105< 4 Ohm Over 65% 4 Ohm <0.1% MR MAX 1 Ohm 2500W MAX 2 Ohm Impedance 1 Ohm Input 6V-0.2V HPF na LPF 50Hz-220Hz Subsonic Filter Off-50Hz Bass Boost 6dB/12dB Frequency Response hz Signal to Noise Ratio 85< 4 Ohm Over 90% 4 Ohm <0.1% 10 Woofer Impedance 4 Ohm Damping Factor 150< Damping Factor 150< Max Power 750 Watts Fuse Rating 40A Fuse Rating 80A Sensitivity (db/m/w ) 89 db Dimensions: Dimensions: Frequency Response 35-1k Hz W W Voice Coil 2\ EISV-Copper Wire H H Top Plate 8mm L L Magnet 70 Oz W X 4CH 2 Ohm Stereo 6V-0.2V 50Hz-5KHz 50Hz-500Hz na na 20-20KHz

12 FULL RANGE SQ Series FULL RANGE SQ Series American Bass SQ Series Full Range Speakers have been a favorite among dealers and consumers for many years. SQ Series Full Range are available in seven sizes and have been optimized to upgrade factory speaker systems. They feature neodymium swivel tweeters, butyl rubber surround, and woven carbon glass fiber cone enhanced for higher power and superior sound clarity. SQ 3.5 SQ 4 SQ 6.5 SQ 5.7 SQ Woven Carbon/Glass Fiber Cone Butyl Rubber Suspension Surround 10 Oz Magnet/20 Magnet Structure 1 High Temperature Aluminum Voice Coil Swivel 0.75 Titanium Dome Neodymium Tweeter Ferro Fluid Cooled Power Handling: 80 Watts Max/40 Watts Rms Frequency Response: 110Hz-21Kh Sensitivity:85dB(1W/1M) 4 Ohm Impedance Rubber Magnet Boot 4 Woven Carbon/Glass Fiber Cone Butyl Rubber Suspension Surround 10 Oz Magnet/20 Magnet Structure 1 High Temperature Aluminum Voice Coil Swivel 0.75 Titanium Dome Neodymium Tweeter Ferro Fluid Cooled Power Handling: 90 Watts Max/45 Watts Rms Frequency Response: 100Hz-22Kh Sensitivity:86dB(1W/1M) 4 Ohm Impedance Rubber Magnet Boot Woven carbon fiber cone Butyl Rubber Surround 25 oz magnet 80w RMS / 160w MAX Frequency Response 55hz - 22khz Ferro Fluid Cooled 4 OHM impedence Woven Carbon Fiber Cone Butyl Rubber Surround 20oz Magnet Ferro Fluid Cooled 75W RMS / 150W Max Frequency Response: 65Hz ~ 22kHz 4 Ohm Impedance Woven carbon fiber cone Butyl Rubber Surround 1 High Temp. Voice Coil 25 oz. Magnet Ferro Fluid Cooled 80W RMS / 200W Max Frequency Response: 55Hz ~ 22kHz 4 Ohm Impedance SQ 4.6 SQ 5.25 Woven carbon fiber cone Butyl Rubber Surround 1 High Temp. Voice Coil Ferro Fluid Cooled 50W RMS / 100W Max Frequency Response: 90Hz ~ 22kHz 4 Ohm Impedance Woven Carbon Fiber Cone Butyl Rubber Surround 1 High Temp. Voice Coil Ferro Fluid Cooled 60W RMS / 120W Max Frequency Response: 75Hz ~ 22kHz 4 Ohm Impedance 22 23

13 AMPLIFIERS HD MAX 1 Ohm NA MAX 2 Ohm 150W X 4CH Input 6V-0.2V Variable Crossover 50Hz-500Hz Multiply x1, x10 LPF na Subsonic Filter 10Hz-100Hz Bass Boost na Frequency Response 20Hz-30KHz Signal to Noise Ratio 105< 4 Ohm Over 65% 4 Ohm <0.1% Damping Factor 150< Fuse Rating 40A Dimensions: W 9.13 H 2.18 L W X 4CH WATTS MAX 3500 WATTS MAX HD Ohm Stable Class D Mono Block Amplifier Low Level Input and Output Frequency Response: 15Hz ~ 270Hz Input Level: 6V ~ 0.2V Variable Subsonic: 10Hz ~ 50Hz Variable Low Pass Filter: 35Hz ~ 250Hz Variable Bass Boost: 0 ~ 9db S/N Ratio: >85 THD: 0.1% Remote Gain Controller Two Amplifiers Linkable Connector and Selector Fuse Rating: 120 Amps Linked Fuse Rating: 240 Amps 3500 Watts Max 1600 Watts RMS Dimensions (Inches) Height: 2.18 Width: 9.13 Lemgth: HD Ohm Stable Class D Mono Block Amplifier Low Level Input and Output Frequency Response: 15Hz ~ 270Hz Input Level: 6V~0.2V Variable Subsonic: 10Hz ~ 50Hz Variable Low Pass Filter: 35Hz ~ 250Hz Variable Bass Boost: 0db ~ 9db S/N Ratio: >85 THD: 0.1% Remote Gain Controller Two Amplifiers Linkable Connector and Selector Fuse Rating: 60Amps Linked Fuse Rating: 120 Amps 1500 WATTS MAX 800 Watts RMS Dimensions (Inches) Height: 2.18 Width: 9.13 Length: WATTS MAX HD WATTS MAX 1 Ohm Stable Class D Mono Block Amplifier Low Level Input and Output Frequency Response: 15Hz ~ 270Hz Input Level: 6V ~ 0.2V Variable Subsonic Filter: 10Hz ~ 50Hz Variable Low Pass Filter: 35Hz ~ 250Hz Varaible Bass Boost: 0 ~ 9db S/N Ratio: >85 THD: 0.1% Remote Gain Controller Two Amplifiers Linkable Connector and Selector Fuse Rating: 90 Amps Linked Fuse Rating: 180 Amps 2500 Watts Max 1250 Watts RMS Dimensions (Inches) Height: 2.18 Width: 9.13 Length:

14 PH 1600 MD AMPLIFIERS PH Series PH Series- American bass was on a pursuit to design a line of amplifiers that were capable of fitting into some of the most confined spaces. We have designed Phantom Series amplifiers that are capable of high power output with high efficiency and difficult loads. American Bass completed the mission with 5 models that are reliable and modestly priced. Integrated with modern technology, the Phantom Series amplifiers are one of the most dependable products on the market. For more images please visit our website WATTS MAX PH 2500 MD Micro Technology Amplifier 1 Ohm Stable Class D Mono Block Amplifier RMS at 1 Ohm: 800 Watts Max at 1 Ohm: 1600 Watts Frequency Response: 10Hz ~ 220Hz Input Level: 5V ~ 0.2V Variable Subsonic: 10Hz ~ 50Hz Varaible Low Pass Filter: 40Hz ~ 220Hz Switchable Bass Boost: 0dB, 6dB, 12dB Fuse Rating: 60 Amp Dimensions (Inches) Height: 2.12 Width: 5.51 Length: WATTS MAX PH 4000 MD Micro Technology Amplifier 1 Ohm Stable Class D Mono Block Amplifier Rms at 1 Ohm: 2000 Watts MAX at 1 Ohm: 4000 Watts Frequency Response: 10Hz ~ 220Hz Input Level: 5V ~ 0.2V Variable Subsonic: 10Hz ~ 50Hz Variable Low Pass Filter: 40Hz ~ 220Hz Switchable Bass Boost: 0dB, 6dB, 12dB Fuse Rating: 150 Amp Dimensions (Inches) Height: 2.12 Width: 5.51 Length: Micro Technology Amplifier 1 Ohm Stable Class D Mono Block Amplifier RMS at 1 Ohm: 1250 Watts MAX at 1 Ohm: 2500 Watts Frequency Response: 10Hz ~ 220Hz Input Level: 5V ~ 0.2V Variable Subsonic: 10Hz ~ 50Hz Variable Low Pass Filter: 40Hz ~ 220Hz Switchable Bass Boost: 0dB, 6dB, 12dB Fuse Rating: 100 Amp Dimensions (Inches) Height: 2.12 Width: 5.51 Length: WATTS MAX 100W X 4CH 1000 WATTS MAX PH 5100 MD FR 2Ohm 4x120W+600W PH 4100 FR 4Ohm 4X90W+300W 4Ohm Bridged 2X200w+300W Micro Technology Amplifier Input Level 0.2V-5V 2 and 4 Ohm Stable Class AB Frequency Response 20Hz-25KHz 2 Ohm load 4x120W HPF Frequency 20Hz-200Hz 4 Ohm load 4x80W Subsonic Filter Frequency 8Hz-50Hz Frequency Response: 15Hz-25KHz LPF Frequency 40Hz Input Level: 5V ~ 0.2V 4Ohm load <0.05% Variable Subsonic: 50Hz-750Hz S/N Ratio >89dB Variable Low Pass Filter: 50Hz-750Hz Optional Remote Control YES Switchable Bass Boost: n/a 4x Channel Bridged Enable in same group Fuse Rating: 150 Amp Overload Protect system YES Dimensions (Inches) Overheat Protect Sytem YES 120W X 4CH Height: 2.12 Dimensions 15.2"x5.5"x2.1" Width: WATTS MAX Length: 10 27

15 AMPLIFIERS GT Series S/N RATIO >100dB THD (IHF-A) 0.02% CHANNEL SEPARATION >55dB INPUT SENSITIVITY 0.15V-5V INPUT IMPEDANCE 47KOhm SLEW RATE 10V / Usec DAMPING FACTOR 200 AT 4 Ohm GT MAX POWER 2000 WATTS 8.7 x 2.2 x 19.6 COMMON FEATURES FOR GT SERIES 2 CH & 4CH AMPLIFIERS Mosfet Power Supply Amplifier Double Sided Epoxy through Hole PCB Gold Plated Brass Set Screw Terminals 2/4 Channel Input Selector Switch (4CH. Only) 24 db / Oct. Crossover -Variable High Pass Crossover (30Hz-500Hz) -Variable Low Pass Crossover (30Hz-500Hz) Variable Subsonic Filter 10Hz-100Hz Variable 0dB TO 18dB Bass Boost at 45Hz High / Low Level RCA Input 5 Way Protections Daisy Chain Through Output RCA Power and Protection LED 2 OHM Stable Circuits Trimode Output Configurations 2 Way Installations GT MAX POWER 900 WATTS 8.7 x 2.2 x 13.3 GT MAX POWER 950 WATTS 8.7 x 2.2 x 15.6 LOUD AND CLEAR FOR MIDRANGE AND FULL RANGE SPEAKERS GT MAX POWER 650 WATTS 8.7 x 2.2 x 9 GT MAX POWER 1700 WATTS 8.7 x 2.2 x 17.6 GT MAX POWER 3000 WATTS 8.7 x 2.2 x 25.5 GT MAX POWER 1200 WATTS 8.7 x 2.2 x 19.6 GT MAX POWER 750 WATTS 8.7 x 2.2 x 13.7 GT MAX POWER 3200 WATTS 8.7 x 2.2 x

16 AMPLIFIERS Elite Series DIGITAL MONOBLOCK AMPLIFIER Digital linkable/dual mono block amplifier Dual MOS-FET PWM power supply Fully stable into 1ohm ( 2ohm for link ) Variable Subsonic filter Variable Low pass filter Variable Bass boost Wired Remote control with clipping indicator 4 ways of protection circuits (Thermal, Voltage, Speaker short & DC offset) LINKABLE MICRO TECHNOLOGY MULTI-CHANNEL AMPLIFIER 2ohm stereo stable class AB Variable Subsonic filter Variable High pass filter Variable Low pass filter X-over Multiply Variable Bass boost Band-pass capable Compact sized and efficient design Double sided printed circuit board 4 ways of protection (Thermal, Voltage, Speaker short & DC offset) AMPLIFIERS Elite Series ELITE W X 2.43H X INCHES 1200 Watts ELITE W X 2.43H X INCHES 2800 Watts ELITE W X 2.43H X INCHES 1800 Watts ELITE W X 2.43H X INCHES 800 Watts 30 31

17 CROSSOVERS Crossover Series ABX-2.1R MAX LEVEL INPUT 6 VOLTS MAX LEVEL OUTPUT 10 VOLTS FREQUENCY RESPONSE 10Hz ~ 20KHz TOTAL HARMONIC DISTORTION 0.016% SIGNAL TO NOISE RATIO 110 INPUT IMPEDANCE 18K OHM OUTPUT IMPEDANCE 150 OHM CURRENT DRAW 0.2 AMPS BANDWIDTH 25Hz ~200Hz CENTER FREQUENCY 25Hz ~ 65Hz LINE DRIVER LOW BASS ENHANCER ABX-3.1A FRONT HIGH PASS (x1): 35Hz-400Hz (x20): 700Hz-8KHz REAR HIGH PASS: 35Hz-400Hz SUBWOOFER LOW PASS: 45Hz-250Hz (-18dB/OCT) OUTPUTS LEVEL: 8V PEAK REQUESNCY RESPONSE: 10-50KHz(-3dB) S/N RATIO: 110dB THD: 0.01% INPUT IMPEDANCE: 20K OHMS OUTPUT IMPEDANCE: LESS THAN 150 OHMS CHANNEL SEPARATION: MORE THAN 70dB SUBSONIC FILTER: ON/OFF WITH -18dB/OCT. AT 40 Hz LOW PASS/HIGHPASS: -18BD/OCT POWER SOURCE: VOLTS DC NEGATIVE GROUND ABX-3.1R FRONT HIGH PASS (x1): 35Hz-400Hz (-18dB/OCT) (x20): 700Hz-8KHz (-18dB/OCT) REAR HIGH PASS: 35Hz-400Hz (-18dB/OCT) SUBWOOFER LOW PASS: 45Hz-250Hz (-18dB/OCT) OUTPUTS LEVEL: 8V PEAK REQUESNCY RESPONSE: 10-50KHz(-3dB) S/N RATIO: 110dB THD: 0.005% INPUT IMPEDANCE: 20K OHMS OUTPUT IMPEDANCE: LESS THAN 150 OHMS CHANNEL SEPARATION: MORE THAN 70dB 32 SUBSONIC FILTER: ON/OFF WITH -24dB/OCT. AT 25 Hz LOW PASS/HIGHPASS: -18BD/OCT 33 p POWER SOURCE: VOLTS DC NEGATIVE GROUND p

18 AMPLIFIERS Hybrid VFL Series COMMON FEATURES Working Impedance: 1 Ohm Input Sensitivity: 6V ~ 0.2V Variable HPF: NA Variable LPF: 50 Hz ~ 220Hz Subsonic Filter: Off ~ 50Hz Bass Boost: 6 db / 12 db Frequency Response : 20 ~ 250Hz Signal to Noise Ratio: 85 < 4 ohm: Over 90% 4 ohm: < 0.1% Damping Factor: 150 < 75 x 4 WATTS MAX AMPLIFIERS XD Series 1 Ohm Digital Mono Block (VFL is 4-Channel), Class D Technology, Linkable. These amplifiers achieved a score of 174.4dB in db Drag and are World Renowned for Their Unparalleled Power Output and Reliability. World-Class Competitors are using our VFL Series Amplifiers to Dominate the Competition Circuits Regularly VFL HYBRID D VFL HYBRID D Continuous Power Rated Power Output Fuse Rating Dimensions 2200 Watts 1 Ohm 4400 Watts Max 1 Ohm 120A L x W x H Continuous Power Rated Power Output Fuse Rating Dimensions 1350 Watts 1 Ohm 2700 Watts Max 1 Ohm 80A L x W x H VFL HYBRID D Continuous Power 900 Watts 1 Ohm Rated Power Output 1900 Watts Max 1 Ohm Fuse Rating 40A Dimensions L x W x H VFL HYBRID Continuous Power 150W X 2 Ohm Working Impedance 2 Ohm Input Sensitivity 6V ~ 0.2V Variable HPF 50Hz - 5KHz Variable LPF 50 Hz ~ 500Hz Subsonic Filter Off ~ 50Hz Frequency Response 20 ~ 20KHz Signal to Noise Ratio 105 < 4 ohm Over 65% 4 ohm < 0.1% Damping Factor 150 < Fuse Rating 40A Dimensions L x W x H 1100 WATTS MAX XD Power Output 14.4V 4 Ohm 55W X 2CH 2 Ohm 75W X 2CH 4 Ohm MONO 130W X 1CH Max Power 1100W S/N Ratio >95dB THD 0.05% Channel Separations >50dB Input Sensitivity 0.2V - 6V Impedance 20 Kohm Dampening Factor >100 Fuse Rating 20A Dimensions: W 9.44" H 2.08" L 7.87" XD V 120W X 2CH 170W X 2CH 330W X 1CH 1400W >95dB 0.05% >50dB 0.2V - 6V 20 Kohm >100 20A 9.44" 2.08" 11.02" 1400 WATTS MAX XD FR 14.4V 55W X 4CH 75W X 4CH 130W X 2CH 1400W >95dB 0.05% >50dB 0.2V - 6V 20 Kohm >100 40A XD V 245W X 1CH 450W X 1CH 1800W >95dB 0.05% >50dB 0.2V - 6V 20 Kohm >100 25A X WATTS MAX 34 35

19 MID RANGE VFL Series VFL 525MR VFL 65MB 6.5 carbon fiber reinforced paper cone Suspension Rubber Surround 20oz Magnet / 60oz Structure 1.5 High Temp Voice Coil Frequency Response: Hz 350 Watts Max Power Sensitivity 93dB 8 Ohm Impedance SQ 6B Silver Bullet Dustcap 6.5 Coated Paper Cone Pressed Foam Suspension Surround 20oz Magnet 1.5 High Temp Voice Coil Frequency Response: Hz Sensitivity 101dB 300 Watts Max Power 8 Ohm Impedance MID RANGE SQ Series Midrange is the most important element of sound since this is where most of music s tone comes from. American Bass manufacture a variety of midrange speakers to suit anyone s needs. Our Mid Range Series carry sound as the original recording s audio engineer intended, and reproduce more of what car enthusiasts need. American Bass has a large selection of Midrange speakers, ranging in sizes from 5 to 10. This series of speaker is optimized for loud front end clarity and performance Coated Paper Cone Accordion Surround 20oz Magnet 1.5 High Temp Voice Coil Frequency Response: Hz Sensitivity 98dB 350 Watts Max Power 8 Ohm Impedance VFL 10MR Accordion Surround 40oz Magnet Frequency Response: Hz Sensitivity 90dB 500 Watts Max Power 8ohm Impedance SQ Coated Paper Cone Pressed Foam Suspension Surround 20oz Magnet 1.5 High Temp Voice Coil Frequency Response: Hz Sensitivity 101dB 300 Watts Max Power 8 Ohm Impedance SQ 65CBX 6.5 Black Paper Cone Accordion Surround 13 OZ Magnet/ 25 OZ Magnet Structure 1 High- Temperature Kapton Voice Coil Power Handling: 300 Watts Max Frequency Response: 300Hz ~ 5kHz Sensitivity: 97Db (1W/1M) 8 Ohm Impedance Grille Included VFL 69MR 6 x9 Black Paper Cone Accordian Surround Aluminum Bullet 20oz Magnet / 60oz Structure 1.5 High Temp Voice Coil Frequency Response: Hz 350 Watts Max Power Sensitivity 93dB 8 Ohm Impedance VFL 65MR 6.5 Coated Paper Cone Accordian Surround 20oz Magnet 1.5 High Temp Voice Coil Frequency Response: Hz Sensitivity 99dB 350 Watts Max Power 8ohm Impedance 8 Coated Paper Cone Accordion Surround 30oz Magnet 1.5 High Temp Voice Coil Frequency Response Hz Sensitivity 100dB 350 Watts Max Power 8ohm Impedance SQ 8 SQ 8B 8 Coated Paper Cone Accordion Surround 30oz Magnet 1.5 High Temp Voice Coil Frequency Response Hz Sensitivity 102dB 350 Watts Max Power 8ohm Impedance

20 MID RANGE MX Series MX 6.5DB Rated power 400 W Working Imp 8 Ohm Sensitivity 99 db /w/w Frequency Response 120-6KHz Voice Coil 1.5 Magnet 30 Oz Surround Foam MX-6BC 6.5 Sealed paper cone Midrange with Bullet Cloth Surround Suspension High Temperature Voice Coil 20 OZ Magnet Frequency Response 300Hz- 5KHz Sensitivity 97 db (1W/1M) 8 Ohm 300 Watts Max MX 250T 1 Compression Tweeter Imp 4 Ohm Max Power 150 W Sensitivity (db/m/w) 105b Frequency Response 5k-15k Hz Voice Coil 1 CCAW Magnet: 17 Oz Recommended Crossover: 5.5k Hz Features: Aluminum Diaphragm Aluminum Horn Baffle MX 251T TWEETERS MX Series American Bass tweeters are what high-end audio enthusiast crave. These tweeters beautifully reproduce crisp audio down to every last detail. Singing highs and crystal-clear dimensional voicing are what make our tweeters some of the best around. Bass is simply not enough for any car audio system. Tweeters are needed to compliment the bass as well as provide for the best musical experience. We offer multiple mounting options: flush, surface, or angled. MX 252T 1 compression Tweeter Imp 4 Ohm Max Power 150 W Sensitivity (db/m/w) 103db Frequency Response 4k-15k Hz Voice Coil 1 CCAW Magnet: 5 Oz Recommended Crossover: 5.5k Hz Features: Aluminum Diaphragm Aluminum Horn Baffle and Bullet 1 compression Tweeter Imp 4 Ohm Max Power 150W Sensitivity (db/m/w) 103db Frequency Response 4k-15k Hz Voice Coil 1 CCAW Magnet: 8 Oz Recommended Crossover: 5.5k Hz Features: Aluminum Diaphragm Aluminum Horn Baffle and Bullet MX 8DB MX 10DB MX 443T MX 444T 8 Aluminum Frame Midrange Power Handling: 500 Watts Max Sensitivity: 99dB/w/m Frequency Response: 120Hz to 8 KHz 2 Voice Coil 50oz Magnet Foam Surround 8 Ohms 10 Aluminum Frame Midrange Power Handling: 500 Watts Max Sensitivity: 99dB Frequency Response: 110Hz to 6 KHz 3 Voice Coil 70oz Magnet Foam Surround 8 Ohm Impedance Custom Molded Grille 1.75 compression HornTweeter Imp 8Ohm Max Power 200 W Sensitivity (db/m/w) 105 db Frequency Response 4k-15k Hz Voice Coil 1.8 Copper wire Magnet: 10 Oz Recommended Crossover: 4.5k Hz Features: Fabric Diaphragm Plastic Horn Baffle and Bullet 1.75 compression Tweeter Imp 4 Ohm Max Power 200 W Sensitivity (db/m/w) 105 db Frequency Response 4k-15k Hz Voice Coil 1.75 CCAW Magnet: 12 Oz Recommended Crossover: 4.5k Hz Features: Aluminum Diaphragm Aluminum Horn Baffle and Bullet 38 39

21 TWEETERS SQ Series American Bass tweeters are what high-end audio enthusiast crave. These tweeters beautifully reproduce crisp audio down to every last detail. Singing highs and crystal-clear dimensional voicing are what make our tweeters some of the best around. Bass is simply not enough for any car audio system. Tweeters are needed to compliment the bass as well as provide for the best musical experience. We offer multiple mounting options: flush, surface, or angled. SQ 05T SQ T1 SQ T12 Niobium Micro Dome Tweeter Polypropylene Diaphragm Power Handling: 200 Watts Max Built In Crossover Swivel Mount and Surface Mount or Angle Mount 4 Ohm Impedance Frequency Response: 5-20k Hz Sensitivity: 102dB TWEETERS SQ Series TITANIUM DIAPHRAGM W/ HIGH TEMPERATURE VOICE COIL DIE CAST ALUMINUM FRAME DIAMOND CHROME CUTTING FINISH HIGH-STRENGTH NEODYMIUM MAGNET POWER HANDLING: 100 WATTS MAX/50 WATTS RMS FREQUENCY RESPONSE: 3K-20Kh SENSITIVITY:109dB(1W/1M) 4 OHM IMPEDANCE Silk Dome Tweeter High Density Neodymium Magnet Surface & Flush Mount Pieces Included Ferro Fluid Cooled 75W RMS / 150W Max. Frequency Response: 2k ~ 15kHz 4 Ohm Impedance SQ T14 Niobium Micro Dome Tweeter Polypropylene Diaphragm Power Handling: 200 Watts Max Built In Crossover Surface Mount or Angle Mount 4 Ohm Impedance Frequency Response: 5-20k Hz Sensitivity: 102dB SQ T2 SQ T10 SQ T20 TETERON DOME TWEETER HIGH-DENSITY NEODYMIUM MAGNET FLUSH/ SWIVEL/ SURFACE/ OR ANGLE MOUNTING FERRO FLUID COOLING POWER HANDLING: 120 WATTS MAX/ 60 WATTS RMS FREQUENCY RESPONSE: 1.4K-24KHz IMPEDANCE: 4 OHM SENSITIVITY: 93Db (1W/1M) 12Db TWO-WAY PASSIVE CROSSOVER Frequency Response: 4kHz 22kHz Power Handling RMS / Program: 50 / 100 Watts Voice Coil Diameter: 1 / 25mm Diaphragm Material: Titanium Sensitivity: 103 db Impedance: 4 Ohm Frequency Response: 3.5kHz 20kHz Power handling RMS / Program: 75 / 150 Watts Voice Coil Diameter: 1.6 / 40mm Diaphragm Material: Titanium Sensitivity: 108 db Impedance: 4 Ohm 40 41

22 CROSSOVERS Crossover Series SPEAKER CABLES AVAILABLE 10 AWG 12 AWG 14 AWG 16 AWG 18 AWG REMOTE WIRE ACCESSORIES WIRES AB-LDR-2 POWER SUPPLY 11-15V DC MAX OUTPUT VOLTAGE 8V RMS INPUT IMPEDANCE 15K OHMS S/N RATIO 90dB T.H.D. 05% FREQUENCY RESPONSE 10Hz-50KHz, -3dB 2 CHANNEL LINE LEVEL WITH 8 VOLT LINE DRIVER 7 BAND PARAMETRIC PRE-AMPLIFIER WITH SUBWOOFER OUTPUT AND DIGITAL FREQUENCY DISPLAY SPECIFICATION POWER SUPPLY 11-15V DC NEG GROUND MAX OUTPUT VOLTAGE 7V RMS PRE GRAPHIC FREQUENCY 50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6KHz, 12KHz EQUALIZATION RANGE +-12dB SUBWOOFER FREQUENCY 30Hz-300Hz INPUT IMPEDANCE 15K OHMS S/N RATIO 90dB T.H.D. 05% CHANNEL SEPARATIONS 70dB FREQUENCY RESPONSE 10Hz-50KHz (-3dB) POWER / GROUND CABLES AVAILABLE SIZES 1/0 AWG 4 AWG 8 AWG p p

23 ACCESSORIES AMP KITS ACCESSORIES DIGITAL FUSE BLOCKS 0 GAUGE AMP INSTALLATION KIT This Kit Contains: Deluxe Hight Quality Fuse Holder Gold Plated ANL Fuse(250A) 17ft 0 Gauge Red Power Cable 3ft 0 Gauge Bloack Power Cable 17ft 18 Gauge Blue Turn-on Wire 25ft 12 Gauge Speaker Wire 17ft Deluxe RCA Interconnect 2 0 Gauge Ring Terminal 10 Wire Ties 3 Screws 4 GAUGE AMP INSTALLATION KIT Available in ANL or Mini ANL CONTENTS 17FT 4 Gauge Red Power Wire 3FT 4 Gauge Black Power Wire 25FT 16 Gauge Speaker Wire 17FT 18 Gauge Blue Remote Wire 17FT High Quality Cable 6FT Split Loom Tube ACCESSORIES Gold Plated ANL Fuse Holder And ANL Fuse 5/16 Gold Plated Ring Terminal 1/4 Gold Plated Ring Terminal #10 Gold Plated Ring Terminal Gold Plated Speaker Terminal Grommets Wire Ties 4483 DIGI 1034 Digital ANL 1 Way Item 4483 ANL Fuse Block One 1/0 GA Inputs To (1) 1/0 GA Out 8 GAUGE AMP INSTALLATION KIT 5590 DIGI III 5594 DIGI 1 WAY CONTENTS 17FT 8 Gauge Red Power Wire 3FT 8 Gauge Black Power Wire 25FT 16 Gauge Speaker Wire 17FT 18 Gauge Blue Remote Wire 17FT High Quality Cable 6FT Split Loom Tube Amperage / Voltage Meter Item 5590 One 1/0 GA Inputs To (1) 1/0 GA Out Item 5594 Digital 1/0 GA ANL Fuse Holder One 1/0 GA Inputs To (1) 1/0 GA Out Amperage/Voltage Meter ACCESSORIES Gold Plated AGU Fuse Holder And AGU Fuse 5/16 Gold Plated Ring Terminal 1/4 Gold Plated Ring Terminal #10 Gold Plated Ring Terminal Gold Plated Speaker Terminal 44 Grommets 45 p Wire Ties p

24 ACCESSORIES ANL FUSE BLOCKS ACCESSORIES POWER & GROUND BLOCKS 4469 ANL ANL PB PB 1448 ANL 1044 ITEM 4469 ANL FUSE BLOCK ONE 0 GA INPUT TO FOUR 4 GA OUT ANL 1024 ITEM 4470 ANL FUSE BLOCK ONE 0 GA INPUTS TO TWO 4 GA OUT POWER / GROUND BLOCK ITEM 461 ONE 1/0 GA INPUT TO (4) 4 GA OUT POWER / GROUND BLOCK ITEM 462 ONE 4 GA INPUT TO (4) 8 GA OUT 5586 CQ CQ PB 1448D 5594 PB-2054 ANL 1 WAY ITEM CQ 1111 ONE 1/0 GA WATERPROOF FUSE HOLDER ANL 1 WAY ITEM CQ 2200 ONE 1/0 GA WATERPROOF FUSE HOLDER ITEM 596 POWER / GROUND BLOCK DUAL 4 GA INPUT (8) 8 GA OUT ITEM 594 POWER / GROUND BLOCK TWO 1/0 GA INPUTS TO (5) 4 GA OUT 5585 CQ (W) 5597 PB 0024 ANL 1 WAY ITEM CQ 2200 (W) ONE 1/0 GA WATERPROOF FUSE HOLDER POWER / GROUND BLOCK ITEM 597 ONE 1/0 GA INPUT TO (2) 4 GA OUT 46 47

25 ACCESSORIES FUSE HOLDERS & AGU BLOCKS ACCESSORIES BATTERY TERMINALS 5563 FB-3428 P CQ N2 ITEM 4475 BT 300, GM SIDE POST TERMINAL ITEM 4476 & 4477 BT 500P FB 3428 (P) ITEM 4463 AGU FUSE BLOCK THREE 4 GA INPUTS TO TWO 8 GA OUT CQN2 ITEM /8 GAUGE WATERPROOF INLINE AGU FUSE HOLDER ITEM 4475 BT300 GM SIDE POST TERMINAL FOR GM CARS & TRUCKS ITEM 4476 (P) 4477 (N) BTP500P & N ACCEPTS ONE 1/0 GA ONE 2 GA TWO 8 GA POS OR NEG TERMINAL 5593 FB-3448 D FB 3448 D ITEM 5593 DIGITAL AGU BLOCK THREE 4 GA IN, FOUR 8 GA OUT, AMP & VOLT METER AB FB P 4468 FB-3448 P 1 Zero AWG In to 4 Zero AWG Out FB 3438 (9) ITEM 4464 AGU FUSE BLOCK THREE 4 GA INPUTS TO THREE 8 GA OUT FB 3448 (P) ITEM 4468 AGU FUSE BLOCK THREE 4 GA INPUTS TO FOUR 8 GA OUT 48 49

26 ACCESSORIES RCA CABLES ACCESSORIES FUSES & RING TERMINALS BRAIDED TWISTED PAIR RCA INTERCONNECT WITH METAL ENDS ANL FUSES AGU FUSES BRAIDED TWISTED PAIR WITH METAL ENDS AVAILABLE IN 3, 6 AND 18 FT ANL FUSES AVAILABLE IN 100, 140 AMP 200, 300 AMP AGU FUSES AVAILABLE IN 60, 80 AMP SQ- SERIES RCA CABLES SOUND DAMPENING SIZES AVAILABLE 3, 6 AND 18 FT Y CABLES CRIMPABLE GOLD CIRCUIT BREAKER CRIMPABLE GOLD PLATED 8 GA, 4 GA, 0 GA RING TERMINALS CIRCUIT BREAKERS AVAILABLE IN 100, 140, 200, 300 AMP 50 p AB-1672-DB PLUS DOOR KIT 12 SQ FT AB-2585-DB PLUS TRUNK KIT 20 SQ FT AB-4653-DB PLUS BULK KIT 36 SQ FT AB-5500-DB PLUS MEGA BULK 48 SQ FT WORLD CLASS COMPETITORS ARE USING AMERICAN BASS SOUND DAMPENING IN THERE CARS FOR EXTRA SPL.CALL FOR DETAILS p

27 AMERICAN BASS SYMPHONY DSP-X8 SYMPHONY- DSP X8 SYMPHONY- DSP X8 SYMPHONY- DSP X8 SYMPHONY- DSP X8 SYMPHONY- DSP X8 FEATURES SYMPHONY- DSP X8 SYMPHONY- DSP X8 SYMPHONY- DSP X8 SPECIFICATIONS American Bass DSP-X8 Power supply: Voltage: 9-16VDC Idling current: 0.5A Switched off without: <2.5mA Switched off with BT: <1 5mA Remote IN voltage: 9-16V Remote OUT voltage: 12.8 VDC (380 ma) Signal Processor: Distortion - 1 khz, 1 VRMS Output: 0.02% -3 db: K Hz -3 db, High Level Input: 97dB -3 db, Low Level Input: 96dB AMERICAN BASS 6 Channel input, 8 Channel RCA output DSP processor. High Level/Low Level/AUX/Optical/Bluetooth input option. Complete software package includes 2 tuning software: PC/iPad and 2 remote control software: Android Phone/ iphone. Chinese and English bilingual software interface to meet different customer needs. Maximum 5V Output. Customer can choose Run configuration wizard mode for rapid configuration of input/output, speaker location configuration. Fast configuration of filter type according to the type of speaker, slope and filter model. Each type of input source can have 4 switchable independent preset memory. Multi modes of turn on/off: Audio/DC Offset/BT/REM. Large current turn on/off remote output, 0-10s time delay remote Turn-on setting. All channel phase 0/180 degree can be adjusted. -3 db, AUX Input: 95dB -3 db, Optical Input: 99dB Channel 1 khz: 80 db Input sensitivity (Low Level): 45mV - 6V Input sensitivity (High Level): 90mV - 12V Input impedance (Low Level): 150 KΩ Input impedance (High Level): 100Ω Max Output 0.1% THD: 5 V INPUT /OUTPUT: High Level: 6 CHANNEL Max Low Level: 6 CHANNEL Max AUX: Stereo Optical: Stereo (S/PDIF Max 48 khz/24 bit) Bluetooth: Stereo Low Level (Pre) Output: 6 CHANNEL Max CROSSOVER: Filter type: Full / High Pass / Low Pass / Band Pass Filter mode and slope: Linkwitz: 12/24/36/48 db Butterworth: 6/12/18/24/30/36/42/48 db Crossover Frequency 70 steps: 10 20K Phase control: 0 / 180 SIZE: L x W x H: 240 x 220 x 33mm HD 844 SUBWOOFER HD 844 SUBWOOFER 8 SUBWOOFER Heavy Duty Stamped Basket With Perimeter Vents Kevlar Fiber Reinforced Non Pressed Paper Cone 2.5 Hi-Temp Voice Coil with Nomex Protection Mirror Image Double Conex Spider System 135 oz Magnet Over-Sized Layer Foam Surround 800 Watts Max Solon Road, Suite 18, Solon, Ohio p VISIT AmericanBassUSA.com