Since the rest position is the optimal average working point, DC offset leads to several undesirable consequences: reduced excursion capabilities,

Size: px
Start display at page:

Download "Since the rest position is the optimal average working point, DC offset leads to several undesirable consequences: reduced excursion capabilities,"

Transcription

1

2 With over 70 years of industry experience, B&C Speakers has designed and built thousands of unique transducers. Each year, our sales and engineering teams work together to develop a comprehensive catalogue. While this catalogue reflects the large majority of our technologies, it is primarily designed to feature more recent additions to the product range. Please refer to our web site ( to get the latest product updates throughout the year. You will also find more detailed specifications and physical dimensions for all standard models. Our web site is by far our most up-todate and complete product information resource. POWER HALING B&C s specified Nominal Power Handling is measured according to the AES-98 standard. The transducer under test is driven for a two-hour period with a pink noise signal having a crest factor of (or 6 db), and filtered to the working range of the transducer itself. For instance, a range is typical for woofer testing. Cone loudspeakers are tested in free air. Compression drivers are coupled to their recommended horn. Power is calculated using the RMS value of applied voltage averaged over the test period and the minimum value of electrical impedance within the working range of the loudspeaker. After the test, the transducer must be in working order, without permanent impact on its technical performance. Due to the transient character of most musical programs, whose crest factor is commonly db or more, it is customary to specify a Continuous Program, double of the Nominal, as a recommended amplifier power in order to fully exploit the thermal and mechanical capabilities of the transducer without any clipping in the amplifier stage. On the contrary, if the amplifier is pushed to its limits and shows frequent saturation, its power specification should be less than the rated Nominal Power Handling of the loudspeaker. EXCURSION LIMITS Evolution is a process that affects not only products, but also their technical specifications. Constant advances in research provide more precise methods to measure the performance of loudspeakers and describe their features. Thiele-Small parameters have become the universal language for describing loudspeaker behaviour in the small signal domain. Nevertheless, they comment little on the working limits of loudspeakers in the large signal domain. These limits are customarily indicated by Xmax, the maximum linear excursion. In a typical measurement, this value corresponds to a maximum of 0% total harmonic distortion (THD) with a sinusoidal signal (though most manufacturers, including B&C, now typically provide data for Linear Mathematical Xmax, not measured Xmax). cent research shows that this method can yield ambiguous results, and even different numerical values for the same loudspeaker. The main limit of this measurement is that it looks at the output signal instead of the physical features of the driver itself. On the contrary, the most up-to-date instruments for distortion analysis can measure the variations in loudspeaker parameters when they are fed with high-level signals. In this way,

3 an excursion limit can be fixed beyond which the parameter s variation becomes excessive. The Xvar value reported in our data (generally after the traditional Xmax value) is measured this way. Beyond this excursion limit, the loudspeaker force factor (), or the total suspension compliance (Cms), or both, drops to less than 50% of their small signal value, producing high distortion levels and strong variations from small signal behaviour. This new technique yields different results from the standard Xmax measurement. B&C Speakers believes that this added information gives a more accurate and reliable description of loudspeaker capabilities in actual operating conditions. QUALITY CONTROL Every product from B&C Speakers is 00% quality tested before it is packaged and shipped. We perform a set of measurements on every component to ensure that its frequency, harmonic distortion, and electrical impedance fall within established tolerance windows. Each cone loudspeaker is additionally tested using a low frequency, high-voltage acoustical sweep to check for vibrations or noises (rub and buzz). Each product is guaranteed and supported with a -year limited warranty. DC OFFSET A known issue of the dynamic loudspeaker is the instability of the average working position for frequencies above the resonance frequency. In this range, because of the phase relationship between force and position, the variations in force factor () vs position drive the moving assembly away from the maximum. Intuitively, the loudspeaker tends to slide down the slopes of the (x) curve. This is referred to as DC offset. Since the rest position is the optimal average working point, DC offset leads to several undesirable consequences: reduced excursion capabilities, increased mechanical stress, and increased distortion. These are due to the loudspeaker working in a region where nonlinearities are larger, and thermal dissipation and power handling are lower. Generally speaking, a large amount of DC offset leads to poor performance and shortened loudspeaker life. All B&C loudspeakers are designed with DC offset reduction in mind, especially our large excursion subwoofers. Our motors are designed to have a large plateau around the rest position, both through magnet assembly optimization and voice coil design. ducing the slope of the curve, especially in the central region, will reduce instability and therefore the amount of DC offset. A special winding technique has been adopted in the most critical cases. Our suspensions are also designed to counteract DC offset before it degrades performance. DC component XDC Force factor (x) (0:05:0) x [mm] [N/A] unstable stable *0 *0 5*0 6*0 7*0 8*0 9*0 0 Frequency fl [] <<coiloin Xd[mm] coiloout>> B&C Speakers reserves the right to change the specifications of our products without notice.

4 FE B&C Speakers is a major supplier to the pro audio market in midrange, woofer and subwoofer cone drivers. We have made a strong commitment to provide a well-balanced line of drivers that range in size from to. Our engineers have optimized each design with Finite Element Analysis (FEA) software to ensure each speaker operates to its fullest potential time and time again. In recent years we have made refinements to our cone geometry, magnet assemblies and speaker production lines to create a dynamic and powerful lineup of products. The models that are included in this catalog all have: From nightclubs, to stadiums, to concert halls around the world, our speakers are chosen based on their reliability, consistency and most of all for their outstanding sound quality and performance. increased increased power handling capacity increased excursion capabilities lower distortion levels bcspeakers.com

5 FE 5FG FE WOOFER 00 W 9 db mm (.7 in) aluminium voice coil Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap 7 mm (5 in) 6.5 Ω 00 W 00 W 9 db mm (.7 in) Copper Kapton 9 mm (0.5 in) 6 mm (0.5 in). T Ferrite Ring Front Side THIELE & SMALL PARAMET 6 5. Qes 0. Qms 0 Qts 0.7 Vas 6. dm (0. ft ) Sd 95 cm (.7 in ) η % ± mm ± 5 mm. g 0 T m 0.8 mh 0 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 mm (5. in) mm (5.6 in) Baffle Cutout Diameter mm (.8 in) 77 mm ( in) Flange and Gasket Thickness 9 mm (0.5 in) Air volume occupied by driver 0.5 dm (0.0 ft ).6 kg (.5 lb).85 kg (. lb) 0x0x5 mm (8.7x8.7x.9 in) RCK005FG-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 5

6 FE 6MD8 FE MIDRANGE 0 W 96 db 8 mm (.5 in) aluminium voice coil Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in 6 Ω, data upon request 70 mm (6.5 in) 6.5 Ω 0 W 0 W 96 db mm (.5 in) 9 mm (0.5 in) 6 mm (0.5 in). T Ferrite Ring Front Side THIELE & SMALL PARAMET Ω Qes 0.9 Qms.7 Qts 0. Vas dm (0. ft ) Sd cm (0.5 in ) η 0.% ± mm ±.5 mm g 0.5 T m 0.5 mh 65 within the specified range mm (7. in) 7 mm (6.7 in) Baffle Cutout Diameter 5 mm (5.7 in) 8 mm (. in) Flange and Gasket Thickness 9 mm (0.5 in) Air volume occupied by driver 0.8 dm (0. ft ). kg (.8 lb).5 kg (5. lb) 0x0x5 mm (8.7x8.7x.9 in) Power on Continuous Program is defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. RCK006MD8-8 Average SPL from 500 to Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 6

7 FE 6PS8 FE WOOFER 00 W 9 db 8 mm (.5 in) aluminium voice coil Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in and 6 Ω, data upon request 70 mm (6.5 in) 6.6 Ω 50 W 00 W 9 db mm (.5 in) mm (0.9 in) 6 mm (0. in). T Ferrite Ring Front Side THIELE & SMALL PARAMET Ω Qes 0. Qms.7 Qts 0. Vas 8 dm (0.8 ft ) Sd cm (0.6 in ) η 0 % ± 6 mm ± 7.5 mm g 0.8 T m 0.6 mh within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 87 mm (7.6 in) 7 mm (6.77 in) Baffle Cutout Diameter 5.0 mm (5.7 in) 8 mm (. in) Flange and Gasket Thickness 9 mm (0.5 in) Air volume occupied by driver 0.8 dm (0.0 ft ). kg (.85 lb).5 kg (5. lb) 0x0x5 mm (8.7x8.7x.9 in) RCK06PS88 Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 7

8 FE 6PS FE WOOFER 00 W 9 db mm (.7 in) copper voice coil Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in 6 Ω, data upon request 70 mm (6.5 in) 6.0 Ω 00 W 00 W 9 db mm (.7 in) Copper mm (0.9 in) 6 mm (0. in). T Ferrite Ring Front Side THIELE & SMALL PARAMET 7 5. Ω Qes 0. Qms.5 Qts 0. Vas 7 dm (0.5 ft ) Sd cm (0.6 in ) η 0 0.7% ±.5 mm ± 6.0 mm 8 g T m 0.7 mh 08 within the specified range mm (7.6 in) 7 mm (6.77 in) Baffle Cutout Diameter 5.0 mm (5.7 in) 88 mm (.6 in) Flange and Gasket Thickness mm (0.5 in) Air volume occupied by driver 0.9 dm (0.0 ft ).5 kg (5.5 lb).75 kg (6.06 lb) 0x0x5 mm (8.7x8.7x.9 in) defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. RCK06PS-8 Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 8

9 FE 8FW5 FE WOOFER 00 W 97 db 5 mm ( in) copper voice coil Shorting copper cap for extended HF Ventilated voice coil gap for reduced power compression Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap 00 mm (8 in) 7. Ω 00 W 00 W 97 db mm ( in) Copper Kapton 6.5 mm (0.65 in) 0 mm (0. in).5 T Ferrite Ring Both Sides Also available in Ω and 6 Ω, data upon request THIELE & SMALL PARAMET 7 5. Ω Qes 0. Qms 9. Qts 0. Vas dm (0. ft ) Sd 0 cm (. in ) η 0. % ± 6 mm ± 5 mm 7 g 7.7 T m 0.56 mh EPB 5 within the specified range mm (8.8 in) 0 mm (8. in) Baffle Cutout Diameter 87 mm (7. in) 00 mm (.9 in) Flange and Gasket Thickness mm (0. in) Air volume occupied by driver.5 dm (0.05 ft ) 5. kg (.6 lb) 5.6 kg (. lb) 55x55x50 mm (0.0x0.0x5.90 in) defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. RCK008FW5-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 9

10 FE 8FG6 FE WOOFER 600 W 9 db 6 mm (.5 in) copper voice coil demodulating ring for very low distortion Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in 6 Ω, data upon request 00 mm (8 in) 6.7 Ω 00 W 600 W 9 db mm (.5 in) Copper 9 mm (0.75 in) 0 mm (0.9 in) 0.9 T Ferrite Ring Front Side THIELE & SMALL PARAMET 5 5. Qes 0. Qms 0. Qts 0. Vas 5 dm (0.5 ft ) Sd 0 cm (. in ) η 0 0.7% ± 7 mm ± 8 mm g 5.8 T m.7 mh 59 within the specified range mm (8.86 in) 0 mm (8. in) Baffle Cutout Diameter 87 mm (7. in) 00 mm (.9) Flange and Gasket Thickness 9 mm (0.7 in) Air volume occupied by driver.5 dm (0.05 ft ).5 kg (9.9 lb).9 kg (0.8 lb) 55x55x50 mm (0.0x0.0x5.90 in) defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. RCK008FG6-8 Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 0

11 FE 0MD6 FE MID-BASS 700 W 00 db 76 mm ( in) aluminium voice coil Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in 6 Ω, data upon request 50 mm (0 in) 7. Ω 50 W 700 W 00 db mm ( in) mm (0. in) 8 mm (0. in).5 T Ferrite Ring None THIELE & SMALL PARAMET Qes 0. Qms.8 Qts 0. Vas 0 dm (0.7 ft ) Sd 0 cm (9. in ) η 0.9 % ±.5 mm ±.5 mm g 9.6 T m. mh EPB 5 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 6 mm (0. in) 5 mm (9.6 in) Baffle Cutout Diameter 0 mm (8.8 in) mm (.9 in) Flange and Gasket Thickness mm (0.55 in) Air volume occupied by driver.6 dm (0.09 ft ) 7. kg (6. lb) 7.9 kg (7. lb) 95xx75 mm (.6x.6x6.89 in) RCK00MD6-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com

12 FE 0FW6 FE WOOFER 500 W 98 db 6 mm (.5 in) aluminium voice coil Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap 50 mm (0 in) 6. Ω 50 W 500 W 98 db mm (.5 in) mm (0.55 in) 8 mm (0. in).5 T Ferrite Ring Front Side THIELE & SMALL PARAMET 6 5 Ω Qes 0.5 Qms. Qts 0. Vas 7 dm (0.95 ft ) Sd 0 cm (50 in ) η 0.6 % ± 5 mm ± 5.5 mm g 6. T m 0.9 mh 5 within the specified range mm (0. in) 5 mm (9.6 in) Baffle Cutout Diameter 0 mm (8.8 in) 6 mm (.6 in) Flange and Gasket Thickness mm (0.5 in) Air volume occupied by driver.5 dm (0.09 ft ) 5.9 kg ( lb) 6.5 kg (. lb) 95xx75 mm (.6x.6x6.89 in) defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. RCK00FW6-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com

13 FE MH FE MID-BASS 800 W 0 db 76 mm ( in) copper voice coil demodulating ring for very low distortion Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in 6 Ω, data upon request 0 mm ( in) 6.5 Ω 00 W 800 W 0 db mm ( in) Copper mm (0.55 in) 8 mm (0. in). T Ferrite Ring Front Side THIELE & SMALL PARAMET 5 5. Ω Qes 0. Qms 7. Qts 0.9 Vas 6 dm (. ft ) Sd 5 cm (80.9 in ) η 0.8 % ± 5 mm ± 7 mm 5 g. T m 0.8 mh 65 within the specified range mm (. in) 96 mm (.6 in) Baffle Cutout Diameter 8 mm (. in) mm (5. in) Flange and Gasket Thickness mm (0.7 in) Air volume occupied by driver. dm (0. ft ) 7.6 kg (6.7 lb) 8.5 kg (8.7 lb) 60x60x00 mm (.7x.7x7.87 in) defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. RCK0MH-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com

14 FE FW6 FE WOOFER 500 W 98 db 6 mm (.5 in) aluminium voice coil Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in Ω, data upon request 0 mm ( in) 6.7 Ω 50 W 500 W 98 db mm (.5 in) mm (0.55 in) 8 mm (0. in). T Ferrite Ring Front Side THIELE & SMALL PARAMET Ω Qes 0. Qms.5 Qts 0.9 Vas 6 dm (.6 ft ) Sd 5 cm (80.9 in ) η 0.6 % ± 5 mm ± 5 mm 7 g 5.5 T m mh 7 within the specified range mm (. in) 98 mm (.7 in) Baffle Cutout Diameter 8 mm (. in) 6 mm (5.5 in) Flange and Gasket Thickness mm (0.5 in) Air volume occupied by driver dm (0.0 ft ) 5.6 kg (. lb) 6.5 kg (. lb) 60x60x00 mm (.7x.7x7.87 in) defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. RCKFW6-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com

15 FE FW76 FE WOOFER 000 W 00 db 76 mm ( in) copper voice coil demodulating ring for very low distortion Nominal (AES)¹ Continuous program² Sensitivity (W/m) Winding Magnetic Gap Also available in and 6 Ω, data upon request 0 mm ( in) W 000 W 00 db mm ( in) Copper 9 mm (0.75 in) mm (0. in).5 T Ferrite Ring Front Side THIELE & SMALL PARAMET 5 5. Ω Qes 0.8 Qms.8 Qts 0.8 Vas 5 dm (.6 ft ) Sd 5 cm (80.9 in ) η 0.7 % ± 7 mm ± 0 mm 75 g 6. T m. mh 00 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 mm (. in) 98 mm (.7 in) Baffle Cutout Diameter 8 mm (. in) 7 mm (5.79 in) Flange and Gasket Thickness mm (0.7 in) Air volume occupied by driver dm (0.0 ft ) 8.5 kg (8.7 lb) 9. kg (0.8 lb) 60x60x00 mm (.7x.7x7.87 in) RCK0FW76-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 5

16 FE PLB00 FE WOOFER 00 W 97 db 00 mm ( in) aluminium voice coil demodulating ring for very low distortion Ventilated voice coil gap for reduced power compression ( ) Nominal (AES)¹ Continuous program² Sensitivity (W/m) Winding Magnetic Gap 0 mm ( in) 6 Ω 600 W 00 W 97 db mm ( in) mm (0.9 in) 0 mm (0.9 in).0 T Ferrite Ring Front Side THIELE & SMALL PARAMET Ω Qes 0.8 Qms 9. Qts 0.7 Vas 7 dm (.6 ft ) Sd 5 cm (8 in ) η 0.7 % ± 9 mm ± 7 mm 77 g 8. T m.6 mh within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 9 mm (.5 in) 99 mm (.8 in) Baffle Cutout Diameter 8 mm (. in) mm (.8 in) Flange and Gasket Thickness mm (0.7 in) Air volume occupied by driver.5 dm (0. ft ) 9. kg (0.5 lb) 0. kg (.9 lb) 60x60x00 mm (.7x.7x7.87 in) RCKPLB00-8 Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 6

17 FE PS00 FE SUBWOOFER 00 W 9 db 00 mm ( in) copper voice coil Double silicone spider with optimized compliance Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in Ω, data upon request 0 mm ( in) 6.7 Ω 700 W 00 W 9 db mm ( in) Copper mm (0.8 in) mm (0. in).05 T Ferrite Ring Both Sides THIELE & SMALL PARAMET 5. Ω Qes 0.9 Qms.9 Qts 0.7 Vas 7 dm (.6 ft ) Sd 5 cm (8. in ) η 0. % ± 8 mm ± 8 mm 06 g.5 T m mh 5 within the specified range mm (.5 in) 99 mm (.8 in) Baffle Cutout Diameter 8 mm (. in) 8 mm (.6 in) Flange and Gasket Thickness mm (0.5 in) Air volume occupied by driver.5 dm (0. ft ) 8.8 kg (9. lb) 9.7 kg (.8 lb) 60x60x00 mm (.7x.7x7.87 in) defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. RCKPS00-8 Average SPL from 50 to 500. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 7

18 FE TBX00 FE SUBWOOFER 000 W 95 db 00 mm ( in) copper voice coil demodulating ring for very low distortion Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in Ω, data upon request 0 mm (.0 in) 6. Ω 000 W 000 W 95 db mm ( in) Copper 5 mm ( in) mm (/ in). T Ferrite Ring Both Sides THIELE & SMALL PARAMET 5. Ω Qes 0.7 Qms 6.9 Qts 0.6 Vas 7.5 dm (. ft ) Sd 5 cm (8. in ) η 0.5 % ± 9 mm ± mm 9 g 5.5 T m.6 mh 55 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 9 mm (.5in) 99 mm (.8 in) Baffle Cutout Diameter 8 mm (. in) 5 mm (5. in) Flange and Gasket Thickness mm (0.5 in) Air volume occupied by driver. dm (0.5 ft ).8 kg (6 lb).7 kg (8.0 lb) 60x60x00 mm (.7x.7x7.87 in) RCKTBX00-8 Average SPL from 50 to 500. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 8

19 FE 5FW76 FE WOOFER 000 W 00 db 76 mm ( in) copper voice coil demodulating ring for very low distortion Double silicone spider and ventilated voice coil gap Nominal (AES)¹ Continuous program² Sensitivity (W/m) Winding Magnetic Gap Also available in and 6 Ω, data upon request 80 mm (5 in) 6. Ω 500 W 000 W 00 db mm ( in) Copper 9 mm (0.75 in) mm (0. in).5 T Ferrite Ring Front Side THIELE & SMALL PARAMET 0 5. Ω Qes 0. Qms 5. Qts 0. Vas 8 dm (.9 ft ) Sd 855 cm (.5 in ) η 0.9 % ± 7 mm ± 8 mm 7 g 6. T m. mh 8 within the specified range mm (5.5 in) 7 mm (.7 in) Baffle Cutout Diameter 5 mm (.9 in) 77 mm (6.97 in) Flange and Gasket Thickness mm (0.55 in) Air volume occupied by driver 5.5 dm (0.9 ft ) 9. kg (0. lb) 0.5 kg (.5 lb) 5x5x mm (6.7x6.7x8.8 in) defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. RCK5FW76-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 9

20 FE 5PLB76 FE WOOFER 800 W 00 db 76 mm ( in) copper voice coil Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in Ω, data upon request 80 mm (5 in) 6. Ω 00 W 800 W 00 db mm ( in) Copper 6 mm (0.6 in) mm (0. in).5 T Ferrite Ring Both Sides THIELE & SMALL PARAMET 5.0 Ω Qes 0.6 Qms 5.9 Qts 0.5 Vas 6 dm (5.8 ft ) Sd 855 cm (.5 in ) η 0.5 % ± 5 mm ± 8 mm 88 g. T m. mh 6 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 9 mm (5.5in) 7 mm (.7 in) Baffle Cutout Diameter 5 mm (.9 in) 69 mm (6.65 in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver 5. dm (0.8 ft ) 8.5 kg (8.7 lb) 9.8 kg (.6 in) 5x5x mm (6.7x6.7x8.8 in) RCK5PBL76-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 0

21 FE 5PS00 FE SUBWOOFER 00 W 95.0 db 00 mm ( in) copper voice coil Double silicone spider with optimized compliance Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in Ω, data upon request 80 mm (5 in) 6.5 Ω 700 W 00 W 95.0 db mm ( in) Copper mm (0.8 in) mm (0. in).05 T Ferrite Both Sides THIELE & SMALL PARAMET 9 5. Ω Qes 0.7 Qms 6.0 Qts 0. Vas 0.0 dm (.6 ft ) Sd cm (.5 in ) η 0.5 % ± 8 mm ± 6.5 mm 60 g. T m.0 mh 8 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 9 mm (5.5 in) 7 mm (.7 in) Baffle Cutout Diameter 5 mm (.9 in) 68 mm (6.6 in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver 6. dm (0. ft ) 9.8 kg (.5 lb). kg (. lb) 5x5x mm (6.7x6.7x8.86 in) RCK5PS00-8 Average SPL from 50 to 500. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com

22 FE 5PZB00 FE SUBWOOFER 00 W 97 db 00 mm ( in) copper voice coil Double silicone spider with optimized compliance Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in Ω, data upon request 80 mm (5 in) 6. Ω 700 W 00 W 97 db mm ( in) Copper mm (0.8 in) 9 mm (0.5 in).5 T Ferrite Ring Both Sides THIELE & SMALL PARAMET 9 5. Ω Qes 0. Qms 6.5 Qts 0.9 Vas 0 dm (,8 ft ) Sd 855 cm (.5 in ) η 0. % ± 8 mm ± 6.5 mm 5 g 5.8 T m mh 0 within the specified range mm (5.5 in) 7 mm (.7 in) Baffle Cutout Diameter 5 mm (.9 in) 7 mm (6.6 in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver 5. dm (0.8 ft ).8 kg (6 lb). kg (8.8 lb) 5x5x mm (6.7x6.7x8.8 in) defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. RCK5PZB00-8 Average SPL from 50 to 500. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com

23 FE 5RBX00 FE SUBWOOFER 000 W 95 db 00 mm ( in) copper voice coil demodulating ring for very low distortion Double silicone spider with optimized compliance Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in Ω, data upon request 80 mm (5 in) 6. Ω 000 W 000 W 95 db mm ( in) Copper 5 mm ( in) mm (0. in). T Ferrite Ring Both Sides THIELE & SMALL PARAMET 5. Ω Qes 0. Qms 5.65 Qts 0.8 Vas 00 dm (.5 ft ) Sd 908 cm (0.7 in ) η 0.0 % ± 9 mm ± 0 mm 5 g.0 T m. mh 0 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 9 mm (5.5 in) 7 mm (.7 in) Baffle Cutout Diameter 5 mm (.9 in) 7 mm (6.8 in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver 5.0 dm (0.8 ft ).7 kg (5.8 lb) kg (8.66 lb) 5x 5x mm (6.7x6.7x8.86 in) RCK5RBX00-8 Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com

24 FE 5TBX00 FE SUBWOOFER 000 W 96 db 00 mm ( in) copper voice coil Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression demodulating ring for very low distortion Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in Ω, data upon request 80 mm (5 in) 6. Ω 000 W 000 W 96 db mm ( in) Copper 5 mm ( in) mm (/in). T Ferrite Ring Both Sides THIELE & SMALL PARAMET 5 5. Ω Qes 0. Qms 5. Qts 0.8 Vas dm (.8 ft ) Sd 855 cm (.5 in ) η 0.95 % ± 9 mm ± mm 6 g 5.5 T m.6 mh 6 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 9 mm (5.5 in) 7 mm (.7 in) Baffle Cutout Diameter 5 mm (.9 in) 8 mm (7. in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver 5. dm (0.9 ft ). kg (7. lb).6 kg (9.98 lb) 5x5x mm (6.7x6.7x8.8 in) RCK5TBX00-8 Average SPL from 50 to 500. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com

25 FE 5TBW00 FE SUBWOOFER 000 W 96 db 00 mm ( in) split winding copper voice coil Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression demodulating ring for very low distortion 57 mm peak-to-peak excursion before damage Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in Ω, data upon request 80 mm (5 in) 6.7 Ω 500 W 000 W 96 db mm ( in) Copper mm (. in) 5 mm (0.59 in).5 T Ferrite Ring Both Sides THIELE & SMALL PARAMET 9 5. Ω Qes 0. Qms. Qts 0. Vas 96 dm (.9 ft ) Sd 855 cm (.5 in ) η 0.6 % ± mm ±.5 mm 8 g 6. T m. mh 8 within the specified range mm (5.5 in) 7 mm (.7 in) Baffle Cutout Diameter 5 mm (.9 in) 9 mm (7.5 in) Flange and Gasket Thickness mm (0.55 in) Air volume occupied by driver 6 dm (0. ft ). kg (.5 lb) 5.6 kg (.9 lb) 5x5x mm (6.7x6.7x8.8 in) defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. RCK5TBW00-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 5

26 FE 8PS00 FE SUBWOOFER 00 W 95.5 db 00 mm ( in) copper voice coil Double silicone spider with optimized compliance Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in Ω, data upon request 60 mm (8 in) 6. Ω 700 W 00 W 95.5 db mm ( in) Copper mm (0.8 in) mm (0. in).05 T Ferrite Ring Both Sides THIELE & SMALL PARAMET 0 5. Ω Qes 0. Qms.6 Qts 0.9 Vas 5 dm (8.6 ft ) Sd 0 cm (87.6 in ) η 0.6 % ± 8 mm ± 8 mm 0 g.5 T m. mh 7 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 60 mm (8 in) 0 mm (7. in) Baffle Cutout Diameter mm (6.6 in) 97 mm (7.75 in) Flange and Gasket Thickness 6 mm (5/8 in) Air volume occupied by driver 9.5 dm (0. ft ) 0.5 kg (. lb).9 kg (6. lb) 500x95x75 mm (9.68x9.8x0.8 in) RCK8PS00-8 Average SPL from 50 to 500. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 6

27 FE 8PZB00 FE SUBWOOFER 00 W 97 db 00 mm ( in) split winding copper voice coil Double silicone spider with optimized compliance Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in Ω, data upon request 60 mm (8 in) 6.5 Ω 700 W 00 W 97 db mm ( in) Copper mm (0.8 in) 8 mm (0. in).5 T Ferrite Ring Both Sides THIELE & SMALL PARAMET 0 5. Ω Qes 0.5 Qms 8.8 Qts 0. Vas 97 dm (0.5 ft ) Sd cm (75.8 in ) η 0. % ± 8 mm ± 8 mm 70 g 6 T m. mh 0 within the specified range mm (8 in) 0 mm (7. in) Baffle Cutout Diameter mm (6.6 in) 0 mm (7.95 in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver 9.5 dm (0. ft ). kg (6.6 lb) kg (0.8 lb) 500x95x75 mm (9.68x9.8x0.8 in) defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. RCK8PZB00-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 7

28 FE 8RBX00 FE SUBWOOFER 000 W 97 db 00 mm ( in) copper voice coil demodulating ring for very low distortion Double silicone spider with optimized compliance Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in Ω, data upon request 60 mm (8 in) 6. Ω 000 W 000 W 97 db mm ( in) Copper 5 mm (.0 in) mm (0. in). T Ferrite Ring Both Sides THIELE & SMALL PARAMET 0 5. Ω Qes 0.6 Qms 7. Qts 0. Vas 0 dm (7.77 ft ) Sd 5 cm (89.88 in ) η 0. % ± 0 mm ± mm 99 g 5. T m.5 mh within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 60 mm (8. in) 0 mm (7. in) Baffle Cutout Diameter mm (6.6 in) 00 mm (7.87 in) Flange and Gasket Thickness mm (0.55 in) Air volume occupied by driver 0.5 dm (0.7 ft ). kg (7. lb).9 kg (0.6 lb) 500x95x75 mm (9.68x9.8x0.8 in) RCK8RBX00-8 Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 8

29 FE 8TBX00 FE SUBWOOFER 00 W 97 db 00 mm ( in) copper voice coil Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression demodulating ring for very low distortion Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in and 6 Ω, data upon request 60 mm (8 in) 6. Ω 00 W 00 W 97 db mm ( in) Copper 5 mm ( in) mm (0.5 in). T Ferrite Ring Both Sides THIELE & SMALL PARAMET 5. Ω Qes 0.7 Qms 7. Qts 0.5 Vas dm (7.5 ft ) Sd 0 cm (87.6 in ) η 0. % ± 9 mm ± mm 09 g 5.5 T m.6 mh 9 within the specified range mm (8 in) 0 mm (7. in) Baffle Cutout Diameter mm (6.6 in) 09 mm (8. in) Flange and Gasket Thickness 6 mm (5/8 in) Air volume occupied by driver 0.5 dm (0.7 ft ) kg (8.6 lb). kg (.7 lb) 500x95x75 mm (9.68x9.8x0.8 in) defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. RCK8TBX00-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 9

30 FE 8TBW00 FE SUBWOOFER 000 W 96 db 00 mm ( in) split winding copper voice coil Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression demodulating ring for very low distortion 57 mm peak-to-peak excursion before damage Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in Ω, data upon request 60 mm (8 in) 6.5 Ω 500 W 000 W 96 db mm ( in) Copper mm (. in) 5 mm (0.59 in).5 T Ferrite Ring Both Sides THIELE & SMALL PARAMET 5 5. Ω Qes 0. Qms 8 Qts 0.9 Vas 75 dm (6.8 ft ) Sd 0 cm (87.6 in ) η 0.76 % ± mm ± mm 5 g 6. T m.5 mh 85 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V 60 mm (8 in) mm (7. in) Baffle Cutout Diameter mm (6.6 in) mm (9.5 in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver dm (0.9 ft ) 5. kg (. lb) 6.8 kg (7 lb) 500x95x75 mm (9.68x9.8x0.8 in) RCK8TBW00-8 for 8 ohms. Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 0

31 B&C is a leader in the development of neodymium woofers for the professional audio market. Our HPL series, launched in 998, was one of the first neodymium loudspeakers available. We have since expanded our use of neodymium to cover our entire range. In addition to having optimized frequency curves, our newer woofers feature baskets that have been designed to maximize power handling, excursion, and heat dissipation. The L series works with an inside slug high-energy neodymium magnet. It has been developed with a new ventilated magnet assembly to assist the cooling of the voice coil. L series woofers strike a balance between light weight and performance. The MDN and MBX series are specifically designed for high output MidBass applications, especially in compact enclosures. The more recent MBX parameters offer an ideal solution for two way systems, but are also an excellent choice for multi-driver applications, such as Line Array enclosures. The MBX series combines high, linearity and excellent power handling. Low moving mass enables a precise and fast transient attack. Other features include a dedicated demodulation ring, ventilated voice coil gap, and new hydrophobic cone surface, offering extreme protection without increased moving mass. The NBX and NW series feature a very highenergy neodymium magnet assembly. A specially designed double silicone spider offers excellent excursion control. The SW series is the next generation of neodymium magnet subwoofers. We focused our energy on long, large diameter voice coils ( to 6 ) for greater power handling and low power compression. In addition, we have developed new suspension systems to offer superb linearity with low DC offset, and industry-leading durability. The most recent DS Series feature high motors with four layer aluminium voice coils, for high subwoofer applications. bcspeakers.com

32 5F6 FULL RANGE 60 W 88 db 6 mm ( in) aluminium voice coil Neodymium magnet allows a very light yet powerful motor assembly OEM Quantities Only 90 mm (.5 in) 6. Ω Nominal (AES) 0 W Continuous Program 60 W Sensitivity (W/m) 88 db mm (.0 in) Kapton Winding 8 mm (0. in) Magnetic Gap mm (0. in). T Neodymium Inside Slug None Also available in 6 Ω, data upon request THIELE & SMALL PARAMET Ω Qes 0.58 Qms 8.8 Qts 0.55 Vas.9 dm (0.07 ft ) Sd 6 cm (7. in ) η 0 0. % ±. mm ±.9 mm g 5. T m 0.6 mh 68 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8v for 8 ohms. 07 mm (. in) 96 mm (.78 in) Baffle Cutout Diameter 8.5 mm (. in) 50 mm (.97 in) Flange and Gasket Thickness mm (0. in) Air volume occupied by driver 0.5 dm (0.0 ft ) 0.8 kg (0. lb) (8 units) 8.75 kg (9.9 lb) (8 units) 5 X 5 X 50 mm (6.7 X.9 X 9.8 in) Average SPL from 00 to Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com

33 F FULL RANGE 00 W 88 db mm (. in) copper voice coil Neodymium magnet allows a very light yet powerful motor assembly OEM Quantities Only 00 mm (.0 in) 6. Ω Nominal (AES) 00 W Continuous Program 00 W Sensitivity (W/m) 88 db mm (. in) Copper Winding mm (0. in) Magnetic Gap 7 mm (0.8 in).5 T Neodymium Inside Slug None THIELE & SMALL PARAMET Ω Qes 0.7 Qms. Qts 0.8 Vas.6 dm (0.06 ft ) Sd 57 cm (8.8 in ) η % ±.8 mm ± 5.7 mm 6 g 9.0 T m 0. mh 07 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 7 mm (5.0 in) 5 mm (.5 in) Baffle Cutout Diameter 0.0 mm (.06 in) 66 mm (.6 in) Flange and Gasket Thickness mm (0.0 in) Air volume occupied by driver 0.5 dm (0.0 ft ) 0.5 kg (.9 lb) ( units). (8.88 lb) ( units) 5 X 5 X 50 mm (6.7 X.9 X 9.8 in) Average SPL from 500 to Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com

34 5MDN8 MIDRANGE 00 W 96 db 8 mm (.5 in) copper voice coil Shorting copper cap for extended HF Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in 6 Ω, data upon request 7 mm (5 in) 7.0 Ω 00 W 00 W 96 db mm (.5 in) 0 mm (0. in) 6 mm (0. in).5 T Neodymium Ring Front Side THIELE & SMALL PARAMET Ω Qes 0.5 Qms.6 Qts 0.5 Vas 0.6 dm (0.0 ft ) Sd 95 cm (.7 in ) η 0.7 % ±.5 mm ±.5 mm 9 g.5 T m 0. mh within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8v for 8 ohms. 50 mm (5.9 in) mm (5.6 in) Baffle Cutout Diameter mm (.8 in) 75 mm (.95 in) Flange and Gasket Thickness 9 mm (0.5 in) Air volume occupied by driver 0.5 dm (0.0 ft ) 0.85 kg (.9 lb).05 kg (. lb) 0x0x5 mm (8.7x8.7x.9 in) RCK005MDN8-8 Average SPL from 00 to Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com

35 5NSM8 MIDRANGE 0 W 99 db 8 mm (.5 in) aluminium voice coil Ideal for Direct Radiation and Horn Loaded Midrange application demodulating ring for very low distortion Hydrophobic Cone treatment Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in 6 Ω, data upon request 7 mm (5.0 in) 6. Ω 0 W 0 W 99 db mm (.5 in) 7 mm (0.8 in) 6 mm (0. in).5 T Neodymium Ring Impregnated Cone THIELE & SMALL PARAMET Ω Qes 0.99 Qms. Qts 0.79 Vas 0. dm (0.0 ft ) Sd 95 cm (.7 in ) η 0.5 % ±. mm ±.0 mm 9 g 0. T m 0.5 mh 0 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 57 mm (6.8 in) mm (5.59 in) Baffle Cutout Diameter mm ( in) 08 mm (.5 in) Flange and Gasket Thickness 9 mm (0.5 in) Air volume occupied by driver. dm (0.0 ft ).7 kg (.0 lb).8kg (.0 lb) 55x55x50 mm (0.0x0.0x5.90 in) RCK005NSM8-8 Average SPL from 500 to Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 5

36 5L8 WOOFER 80 W 9 db 8 mm (.5 in) copper voice coil Shorting copper cap for extended HF Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in 6 Ω, data upon request 7 mm (5 in) 6. Ω 90 W 80 W 9 db mm (.5 in) 0 mm (0.7 in) 6 mm (0. in).5 T Neodymium Ring Front Side THIELE & SMALL PARAMET Ω Qes 0.7 Qms 9. Qts 0.6 Vas. dm (0.5 ft ) Sd 95 cm (.7 in ) η % ±.5 mm ±.0 mm g 9. T m 0.6 mh 6 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8v for 8 ohms. Average 50 mm (5.9 in) mm (5.6 in) Baffle Cutout Diameter.0 mm (.8 in) 75 mm (.95 in) Flange and Gasket Thickness 9 mm (0.5 in) Air volume occupied by driver 0.5 dm (0.0 ft ) 0.85 kg (.9 lb).05 kg (. lb) 0x0x5 mm (8.7x8.7x.9 in) RCK005L8-8 SPL from 00 to Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 6

37 6MDN MIDRANGE 00 W 96.5 db mm (.7 in) aluminium voice coil Ventilated voice coil gap for reduced power compression Neodymium magnet allows a very light yet powerful motor assembly demodulating ring for very low distortion Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in 6 Ω, data upon request 70 mm (6.5 in) 6.5 Ω 00 W 00 W 96.5 db mm (.7 in) 0 mm (0.7 in) 6 mm (0.5 in).5 T Neodymium Ring Front Side THIELE & SMALL PARAMET 0 5. Ω Qes 0.6 Qms.8 Qts 0.0 Vas.7 dm (0.09 ft ) Sd cm (0.5 in ) η 0.6 % ±.5 mm ±.0 mm g T m 0.7 mh 0 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 87 mm (7. in) 7 mm (6.7 in) Baffle Cutout Diameter 5 mm (5.7 in) 7 mm (.9 in) Flange and Gasket Thickness mm (0. in) Air volume occupied by driver 0.6 dm (0.0 ft ).0 kg (. lb).5 kg (.75 lb) 0x0x5 mm (8.7x8.7x.9 in) RCK06MDN-8 Average SPL from 500 to Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 7

38 6MBX WOOFER 00 W 98 db mm (.7 in) aluminium voice coil Neodymium magnet allows a very light yet powerful motor assembly demodulating ring for very low distortion Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in 6 Ω, data upon request 70 mm (6.5 in) 6 Ω 00 W 00 W 98 db mm (.7 in) 0 mm (0.7 in) 6 mm (0.5 in).55 T Neodymium Ring Impregnated Cone THIELE & SMALL PARAMET 5. Ω Qes 0. Qms.9 Qts 0. Vas. dm (0. ft ) Sd cm (0.6 in ) η 0. % ±.5 mm ±.0 mm g.7 T m 0. mh within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 87 mm (7.6 in) 7 mm (6.7 in) Baffle Cutout Diameter 5 mm (5.7 in) 87 mm (. in) Flange and Gasket Thickness mm (0. in) Air volume occupied by driver 0.6 dm (0.0 ft ).5 kg (. lb).75 kg (.86 lb) 0x0x5 mm (8.7x8.7x.9 in) RCK06MBX -8 Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 8

39 6L8 WOOFER 00 W 9 db 8 mm (.5 in) copper voice coil Neodymium magnet allows a very light yet powerful motor assembly demodulating ring allows a very low distortion Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in and 6 Ω, data upon request 70 mm (6.5 in) 6 Ω 50 W 00 W 9 db mm (.5 in) Copper Kapton mm (0.5 in) 6 mm (0.5 in).5 T Neodymium Ring Front Side THIELE & SMALL PARAMET 7 5. Ω Qes 0. Qms.5 Qts 0. Vas 7 dm (0.5 ft ) Sd cm (0.5 in ) η % ± 6 mm ± 5.5 mm 7 g 9.5 T m 0.6 mh 6 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 87 mm (7. in) 7 mm (6.7 in) Baffle Cutout Diameter 5 mm (5.7 in) 85 mm (. in) Flange and Gasket Thickness mm (0. in) Air volume occupied by driver 0.6 dm (0.0 ft ). kg (.6 lb).5 kg (. lb) 0x0x5 mm (8.7x8.7x.9 in) RCK06L8-8 Average SPL from 500 to Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 9

40 8MDN5 WOOFER 00 W 97 db 5 mm ( in) copper voice coil Neodymium ring magnet assembly Ventilated voice coil gap for reduced power compression Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in and 6 Ω, data upon request 00 mm (8 in) 7.7 Ω 00 W 00 W 97 db mm ( in) Kapton 6 mm (0.6 in) 8 mm (0. in).5 T Neodymium Ring Front Side THIELE & SMALL PARAMET Ω Qes 0. Qms.7 Qts 0. Vas 6 dm (0.6 ft ) Sd 0 cm (. in ) η 0.% ± 6 mm ± 6 mm g 5. T m 0.8 mh within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 mm (8.8 in) 0 mm (8. in) Baffle Cutout Diameter 87 mm (7. in) 95 mm (.7 in) Flange and Gasket Thickness mm (0. in) Air volume occupied by driver. dm (0.0 ft ).55 kg (5.6 lb).0 kg (6.6 lb) 50x50x5 mm (9.8x9.8x.9 in) RCK008MDN5-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 0

41 8MBX5 WOOFER 00 W 96.5 db 5 mm ( in) copper voice coil Neodymium ring magnet assembly demodulating ring for very low distortion Ventilated voice coil gap for reduced power compression Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in 6 Ω, data upon request 00 mm (8 in) 5.9 Ω 00 W 00 W 96.5 db mm ( in) 5 mm (0.59 in) 7 mm (0.8 in). T Neodymium Ring Impregnated Cone THIELE & SMALL PARAMET 60.9 Ω Qes 0. Qms 5.6 Qts 0.9 Vas dm (0.8 ft ) Sd 0 cm (. in ) η 0.7 % ± 6 mm ± 8 mm 0 g. T m 0. mh 9 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 mm (8.86 in) 0 mm (8.7 in) Baffle Cutout Diameter 87 mm (7.6 in) 9 mm (.7 in) Flange and Gasket Thickness 9 mm (0.5 in) Air volume occupied by driver. dm (0.0 ft ).8 kg (.97 lb).5 kg (.96 in) 55x55x50 mm (0.0x0.0x5.90 in) RCK008MBX5-8 Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com

42 8NSM6 MIDRANGE 500 W 00 db 6 mm (.5 in) aluminium voice coil Ideal for Direct Radiation and Horn Loaded Midrange application demodulating ring for very low distortion Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in 6 Ω, data upon request 00 mm (8 in) 8. Ω 50 W 500 W 00 db mm (.5 in) Aluminum mm (0.5 in) 0 mm (0.9 in).55 T Neodymium Ring Front Side THIELE & SMALL PARAMET Ω Qes 0.5 Qms 9. Qts 0. Vas.5 dm (0.05 ft ) Sd 0 cm (. in ) η 0.5 % ±.0 mm ±.7 mm 9 g T m 0.6 mh 700 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 9 mm (9. in) mm (8.7 in) Baffle Cutout Diameter 00 mm (7.87 in) 5 mm (.5 in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver.5 dm (0. ft ).85 kg (0.69 lb) 5.5 kg (.0 lb) 95xx75 mm (.6x.6x6.89 in) RCK008NSM6-8 Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com

43 8L5 WOOFER 00 W 9 db 5 mm ( in) copper voice coil Neodymium magnet allows a very light yet powerful motor assembly Shorting copper cap for extended HF Ventilated voice coil gap for reduced power compression 00 mm (8 in) 6.6 Ω Nominal (AES) 00 W Continuous Program 00 W Sensitivity (W/m) 9 db mm ( in) Copper Winding 7 mm (0.67 in) Magnetic Gap 8 mm (0. in).05 T Neodymium Inside Slug Both Sides Also available in and 6 Ω, data upon request THIELE & SMALL PARAMET Ω Qes 0. Qms.6 Qts 0.7 Vas dm (0.9 ft ) Sd 0 cm (. in ) η 0 % ± 7 mm ± 7 mm 8 g. T m 0.5 mh 60 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 mm (8.8 in) 0 mm (8. in) Baffle Cutout Diameter 87 mm (7. in) 90 mm (.5 in) Flange and Gasket Thickness mm (0. in) Air volume occupied by driver. dm (0.0 ft ).8 kg ( lb).5 kg (.96 lb) 55x55x50 mm (0.0x0.0x5.90 in) RCK008L5-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com

44 8NW5 WOOFER 00 W 96.5 db 5 mm ( in) copper voice coil Neodymium ring magnet allows a very high force factor and linear excursion Shorting copper cap for extended HF Ventilated voice coil gap for reduced power compression Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in and 6 Ω, data upon request 00 mm (8 in) 7.7 Ω 00 W 00 W 96.5 db mm ( in) Copper 9 mm (0.75 in) 0 mm (0. in). T Neodymium Ring Both Sides THIELE & SMALL PARAMET 7 5. Ω Qes 0.9 Qms.7 Qts 0.7 Vas dm (0. ft ) Sd 0 cm (. in ) η 0. % ± 6 mm ± 6 mm 8 g 8.9 T m 0. mh 89 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 mm (8.8 in) 0 mm (8. in) Baffle Cutout Diameter 87 mm (7. in) 00 mm ( in) Flange and Gasket Thickness mm (0. in) Air volume occupied by driver. dm (0.0 ft ) kg (6.6 lb).5 kg (7.6 lb) 55x55x50 mm (0.0x0.0x5.90 in) RCK008NW5-8 Average SPL from 00 to 500. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com

45 8L6 WOOFER 700 W 97 db 6 mm (.5 in) copper voice coil Neodymium inside slug magnet assembly Shorting copper cap for extended HF Ventilated voice coil gap for reduced power compression 00 mm (8 in) 7. Ω Nominal (AES) 50 W Continuous Program 700 W Sensitivity (W/m) 97 db mm (.5 in) Copper Winding mm (0.55 in) Magnetic Gap 8 mm (0. in).5 T Neodymium Inside Slug Front Side Also available in 6 Ω, data upon request THIELE & SMALL PARAMET Ω Qes 0.5 Qms 0.9 Qts 0.5 Vas 9.6 dm (0. ft ) Sd 0 cm (. in ) η 0.88 % ±.5 mm ± 5.0 mm 8 g 7.5 T m 0.6 mh 0 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 mm (8.8 in) 0 mm (8. in) Baffle Cutout Diameter 87 mm (7. in) 95 mm (.7 in) Flange and Gasket Thickness 0 mm (0.9 in) Air volume occupied by driver.5 dm (0.05 ft ).8 kg (6.7 lb).5 kg (7.7 lb) 55x55x50 mm (0.0x0.0x5.90 in) RCK008L6-8 Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 5

46 8BG5 WOOFER 500 W 9 db 5 mm ( in) copper voice coil Neodymium magnet allows a very light yet powerful motor assembly Shorting copper cap for extended HF Ventilated voice coil gap for reduced power compression 00 mm (8 in) 6.0 Ω Nominal (AES) 50 W Continuous Program 500 W Sensitivity (W/m) 9 db mm ( in) Copper Winding 7 mm (0.65 in) Magnetic Gap 8 mm (0. in).5 T Neodymium Inside Slug Front Side Also available in 6 Ω, data upon request THIELE & SMALL PARAMET 5 5. Ω Qes 0. Qms. Qts 0. Vas 8 dm (0.6 ft ) Sd 0 cm (. in ) η % ± 6.5 mm ± 8.0 mm 5 g.8 T m 0.5 mh within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 mm (8.8 in) 0 mm (8. in) Baffle Cutout Diameter 87 mm (7. in) 90 mm (.5 in) Flange and Gasket Thickness mm (0. in) Air volume occupied by driver. dm (0.0 ft ).8 kg (.0 lb).5 kg (.96 lb) 55x55x50 mm (0.0x0.0x5.90 in) RCK008BG5-8 Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 6

47 0MBX6 MIDBASS 700 W 99 db 6 mm (.5 in) aluminium voice coil Neodymium inside slug magnet assembly demodulating ring for very low distortion Ventilated voice coil gap for reduced power compression 50 mm (0 in) 6.5 Ω Nominal (AES) 50 W Continuous Program 700 W Sensitivity (W/m) 99 db mm (.5 in) Winding mm (0.5 in) Magnetic Gap 8 mm (0. in).5 T Neodymium Inside Slug Impregnated Cone Also available in 6 Ω, data upon request THIELE & SMALL PARAMET Ω Qes 0.8 Qms.0 Qts 0.6 Vas 6 dm (0.9 ft ) Sd 6 cm (5.6 in ) η 0. % ±.5 mm ± 5.0 mm g 7. T m 0. mh within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 6 mm (0.8 in) 5 mm (9.6 in) Baffle Cutout Diameter 0 mm (9 in) 5 mm (.9 in) Flange and Gasket Thickness mm (0.5 in) Air volume occupied by driver.5 dm (0.05 ft ). kg (7.05 lb).8 kg (8.8 lb) 95xx75 mm (.6x.6x6.89 in) RCK0MBX6-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 7

48 0NSM76 MIDRANGE 800 W 00 db 76 mm ( in) aluminium voice coil Ideal for Direct Radiation and Horn Loaded Midrange application 50 mm (0 in) 7.0 Ω Nominal (AES) 00 W Continuous Program 800 W Sensitivity (W/m) 00 db mm ( in) Winding mm (0.5 in) Magnetic Gap 9 mm (0.5 in).6 T Neodymium Inside Slug Front Side THIELE & SMALL PARAMET 5 5. Ω Qes 0.55 Qms 8.6 Qts 0.5 Vas dm (0.07 ft ) Sd 0 cm (9.6 in ) η 0.5 % ±.5 mm ±.5 mm g.5 T m 0.9 mh 7 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 9 mm (.6 in) 7 mm (0.79 in) Baffle Cutout Diameter mm (9. in) 0 mm (5. in) Flange and Gasket Thickness mm (0.7 in) Air volume occupied by driver 5.0 dm (0.8 ft ).75 kg (8.7 lb).65 kg (0.5 lb) 60x60x00 mm (.7x.7x7.87 in) RCk0NSM76-8 Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 8

49 0HPL6 WOOFER 00 W 98.5 db 6 mm (.5 in) aluminium voice coil Neodymium magnet allows a very light yet powerful motor assembly 50 mm (0 in) 6. Ω Nominal (AES) 00 W Continuous Program 00 W Sensitivity (W/m) 98.5 db mm (.5 in) Winding mm (0.7 in) Magnetic Gap 8 mm (0. in).5 T Neodymium Inside Slug None Also available in 6 Ω, data upon request THIELE & SMALL PARAMET 6 5. Ω Qes 0. Qms.5 Qts 0. Vas dm (. ft ) Sd 0 cm (50 in ) η 0.5 % ± mm ± 5.5 mm 9 g 5 T m 0.5 mh 8 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 6 mm (0. in) 5 mm (9.6 in) Baffle Cutout Diameter 0 mm (9. in) mm (.8 in) Flange and Gasket Thickness mm (0.5 in) Air volume occupied by driver.5 dm (0.05 ft ) kg (. lb).6 kg (5.7 lb) 95xx75 mm (.6x.6x6.89 in) RCK00HPL6-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 9

50 0L6 WOOFER 500 W 97 db 6 mm (.5 in) aluminium voice coil Neodymium magnet allows a very light yet powerful motor assembly Ventilated voice coil gap for reduced power compression 50 mm (0 in) 7 Ω Nominal (AES) 50 W Continuous Program 500 W Sensitivity (W/m) 97 db mm (.5 in) Winding mm (0.55 in) Magnetic Gap 8 mm (0. in).5 T Neodymium Inside Slug Both Sides Also available in and 6 Ω, data upon request THIELE & SMALL PARAMET Ω Qes 0.9 Qms. Qts 0.6 Vas dm (. ft ) Sd 0 cm (9. in ) η 0.8 % ± 6 mm ± 7 mm 7 g 6. T m 0.9 mh 9 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 6 mm (0. in) 5 mm (9.6 in) Baffle Cutout Diameter 0 mm (8.8 in) mm (. in) Flange and Gasket Thickness mm (0.5 in) Air volume occupied by driver.5 dm (0.05 ft ).9 kg (6. lb).5 kg (7.7 lb) 95xx75 mm (.6x.6x6.89 in) RCK0L6-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 50

51 0NW6 WOOFER 600 W 96 db 6 mm (.5 in) copper voice coil Neodymium magnet allows a very light yet powerful motor assembly Shorting copper cap for extended HF Ventilated voice coil gap for reduced power compression 50 mm (0 in) 6.5 Ω Nominal (AES) 00 W Continuous Program 600 W Sensitivity (W/m) 96 db mm (.5 in) Copper Winding 6 mm (0.6 in) Magnetic Gap 8 mm (0. in).5 T Neodymium Inside Slug Both Sides Also available in and 6 Ω, data upon request THIELE & SMALL PARAMET Ω Qes 0.7 Qms.5 Qts 0.6 Vas 7.5 dm (0.95 ft ) Sd 0 cm (50.0 in ) η 0. % ± 8 mm ± 0 mm 7 g 7.5 T m 0.7 mh 85 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 6 mm (0. in) 5 mm (9.6 in) Baffle Cutout Diameter 0 mm (9. in) mm (. in) Flange and Gasket Thickness mm (0.5 in) Air volume occupied by driver.5 dm (0.05 ft ).9 kg (6. lb).5 kg (7.7 lb) 95xx75 mm (.6x.6x6.89 in) RCK0NW6-8 Average SPL from 50 to 500. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 5

52 CL76 WOOFER 700 W 98.5 db 76 mm ( in) copper voice coil Ventilated voice coil gap for reduced power compression 0 mm ( in) 6.5 Ω Nominal (AES) 50 W Continuous Program 700 W Sensitivity (W/m) 98.5 db mm (.0 in) Copper Winding 7 mm (0.67 in) Magnetic Gap mm (0. in).05 T Neodymium Inside Slug Front Side Also available in 6 Ω, data upon request THIELE & SMALL PARAMET 8 5. Ω Qes 0. Qms.8 Qts 0. Vas 59 dm (. ft ) Sd 5 cm (80.9 in ) η 0.9 % ± 6.0 mm ± 8.5 mm 70 g. T m.5 mh 8 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. mm (. in) 99 mm (.77 in) Baffle Cutout Diameter 8 mm (. in) mm (5.59 in) Flange and Gasket Thickness 9 mm (0.5 in) Air volume occupied by driver. dm (0.08 ft ).0 kg (6.6 lb).9 kg (8.6 lb) 60x60x00 mm (.7x.7x7.87 in) RCKCL76-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 5

53 L76 WOOFER 800 W 00 db 76 mm ( in) aluminium voice coil Neodymium magnet allows a very light yet powerful motor assembly Ventilated voice coil gap for reduced power compression 0 mm ( in) 6. Ω Nominal (AES) 00 W Continuous Program 800 W Sensitivity (W/m) 00 db mm ( in) Winding 9 mm (0.75 in) Magnetic Gap 0 mm (0. in).5 T Neodymium Inside Slug Both Sides Also available in and 6 Ω, data upon request THIELE & SMALL PARAMET Ω Qes 0. Qms. Qts 0. Vas 7 dm (.5 ft ) Sd 5 cm (80.9 in ) η 0. % ± 7.0 mm ± 6.5 mm 5 g 0. T m.0 mh 8 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 mm (. in) 98 mm (.7 in) Baffle Cutout Diameter 8 mm (. in) mm (5.5 in) Flange and Gasket Thickness mm (0.55 in) Air volume occupied by driver.5 dm (0.08 ft ).9 kg (8.6 lb).8 kg (0.58 lb) 60x60x00 mm (.7x.7x7.87 in) RCKL76-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 5

54 NW76 WOOFER 000 W 98.5 db 76 mm ( in) aluminium voice coil Neodymium ring magnet allows a very high force factor and linear excursion demodulating ring for very low distortion Ventilated voice coil gap for reduced power compression Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in and 6 Ω, data upon request 0 mm ( in) 6.9 Ω 500 W 000 W 98.5 db mm ( in) Copper 9 mm (0.75 in) mm (0. in). T Neodymium Ring Both Sides THIELE & SMALL PARAMET 0 5. Ω Qes 0.7 Qms.7 Qts 0.6 Vas 76 dm (.7 ft ) Sd 5 cm (80.9 in ) η 0.8 % ± 8 mm ± 0 mm 77 g 5.5 T m.5 mh 5 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 mm (. in) 98 mm (.7 in) Baffle Cutout Diameter 8 mm (. in) 7 mm (5.8 in) Flange and Gasket Thickness mm (0.55 in) Air volume occupied by driver.5 dm (0.08 ft ).9 kg (0.8 lb) 5.8 kg (.79 lb) 60x60x00 mm (.7x.7x7.87 in) RCKNW76-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 5

55 L88 WOOFER 00 W 98 db 88 mm (.5 in) aluminium voice coil mm ( in) 6 Ω Nominal (AES) 700 W Continuous Program 00 W Sensitivity (W/m) 98 db mm (.5 in) Winding mm (0.85 in) Magnetic Gap 0 mm (0. in).5 T Neodymium Inside Slug Front Side Also available in and 6 Ω, data upon request THIELE & SMALL PARAMET 5 5 Ω Qes 0.9 Qms 5 Qts 0.7 Vas 5 dm (.8 ft ) Sd 5 cm (80.9 in ) η 0. % ± 8 mm ± 9.5 mm 7 g 9.9 T m. mh 75 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 mm (. in) 98 mm (.7 in) Baffle Cutout Diameter 8 mm (. in) 0 mm (5.5 in) Flange and Gasket Thickness mm (0.5 in) Air volume occupied by driver.5 dm (0.08 ft ).8 (0.58 lb) 5.7 kg (.57 lb) 60x60x00 mm (.7x.7x7.87 in) RCKL88-8 Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 55

56 BG00 SUBWOOFER 000 W 9 db 00 mm ( in) copper voice coil demodulating ring for very low distortion FEA optimized Neodymium magnet assembly Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression 0 mm ( in) Minumum Impedance 5. Nominal (AES) 000 W Continuous Program 000 W Sensitivity (W/m) 9 db mm ( in) Copper Winding 7 mm (.06 in) Magnetic Gap mm (0. in).5 T Neodymium Inside Slug Both Sides Also available in and 6 Ω, data upon request THIELE & SMALL PARAMET 9 5. Ω Qes 0.5 Qms 6.8 Qts 0. Vas dm (.5 ft ) Sd 5 cm (80.9 in ) η % ± 0.5 mm ± mm 5 g T m.6 mh within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 9 mm (.5 in) 99 mm (.8 in) Baffle Cutout Diameter 8 mm (. in) 7 mm (5. in) Flange and Gasket Thickness mm (0.5 in) Air volume occupied by driver.7 dm (0.09 ft ) 8. kg (8 lb) 9. kg (0.06) 60x60x00 mm (.7x.7x7.87 in) RCKBG00-8 Average SPL from 50 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 56

57 NBX00 SUBWOOFER 000 W 96 db 00 mm ( in) aluminium voice coil demodulating ring for very low distortion FEA optimized Neodymium magnet assembly Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in Ω, data upon request 0 mm ( in) 6.5 Ω 000 W 000 W 96 db mm ( in) Copper 5 mm ( in) mm (0. in). T Neodymium Ring Both Sides THIELE & SMALL PARAMET 5. Ω Qes 0. Qms.9 Qts 0. Vas 5 dm (.8 ft ) Sd 5 cm (8 in ) η 0.5 % ± 0 mm ± 0 mm 7 g 5.6 T m.9 mh 70 Also available NBX 00 - within the specified range -0. defined as db greater then the Applied RMS Voltage is set to.8 V 0 mm (.6 in) 00 mm (.8 in) Baffle Cutout Diameter 80 mm ( in) mm (5.6 in) Flange and Gasket Thickness mm (0.7 in) Air volume occupied by driver dm (0. ft ) 8 kg (7.6 lb) 8.9 kg (9.6 lb) 60x60x00 mm (.7x.7x7.87 in) RCKNBX00-8 for 8 ohms. Average SPL from 50 to 00. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 57

58 L76 WOOFER 000 W 99 db 76 mm ( in) copper voice coil Very light yet powerful motor assembly demodulating ring for very low distortion 59 mm ( in) Minumum Impedance 6. Ω Nominal (AES) 500 W Continuous Program 000 W Sensitivity (W/m) 99 db mm ( in) Copper Winding mm (0.8 in) Magnetic Gap 0 mm (0. in).5 T Neodymium Inside Slug Front Side THIELE & SMALL PARAMET 5 Ω Qes 0. Qms 8. Qts 0. Vas dm (. ft ) Sd 707 cm (09.59 in ) η 0.7 % ± 8 mm ± 9.5 mm 85 g 9 T m. mh within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 59 mm (. in) mm (.5 in) Baffle Cutout Diameter mm (.7 in) 6 mm ( 6. in) Flange and Gasket Thickness mm (0.7 in) Air volume occupied by driver dm (0. ft ).5 kg (9.9 lb) 5.8 kg (.79 lb) 5x5x mm (6.7x6.7x8.8 in) RCKL76-8 Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 58

59 L88 WOOFER 00 W 99 db 88 mm (.5 in) aluminium voice coil Very light yet powerful motor assembly demodulating ring for very low distortion 59 mm ( in) 6.5 Ω Nominal (AES) 700 W Continuous Program 00 W Sensitivity (W/m) 99 db mm (.5 in) Winding mm (0.85 in) Magnetic Gap 0 mm (0. in).5 T Neodymium Inside Slug Front Side Also available in and 6 Ω, data upon request THIELE & SMALL PARAMET 5 5 Ω Qes 0. Qms 7.8 Qts 0. Vas 0 dm (.6 ft ) Sd 707 cm (09.6 in ) η 0.9 % ± 8 mm ± 9.5 mm 86 g 9.9 T m. mh 5 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 59 mm (. in) mm (.5 in) Baffle Cutout Diameter mm (.7 in) 67 mm (6.57 in) Flange and Gasket Thickness mm (0.7 in) Air volume occupied by driver.5 dm (0. ft ).7 kg (0.6 lb) 6.0 kg (. lb) 5x5x mm (6.7x6.7x8.8 in) RCKL88-8 Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 59

60 5L76 WOOFER 000 W 99.5 db 76 mm ( in) copper voice coil Neodymium magnet allows a very light yet powerful motor assembly Ventilated voice coil gap for reduced power compression 80 mm (5 in) 6.7 Ω Nominal (AES) 500 W Continuous Program 000 W Sensitivity (W/m) 99.5 db mm ( in) Copper Winding 8 mm (0.68 in) Magnetic Gap 0.5 mm (0. in).5 T Neodymium Inside Slug Both Sides Also available in Ω, data upon request THIELE & SMALL PARAMET 7 5. Ω Qes 0. Qms.5 Qts 0. Vas 95 dm (6.8 ft ) Sd 855 cm (.5 in ) η 0. % ± 7 mm ± 9 mm 96 g.5 T m.5 mh 5 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 9 mm (5.5 in) 7 mm (.7 in) Baffle Cutout Diameter 5 mm (.9 in) 7 mm (6.7 in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver.5 dm (0. ft ).6 kg (0. lb) 5.9 kg ( lb) 5x5x mm (6.7x6.7x8.8 in) RCK5L76-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 60

61 5NW76 WOOFER 00 W 00.5 db 76 mm ( in) aluminium voice coil demodulating ring for very low distortion Neodymium ring magnet allows a very high force factor and linear excursion Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in and 6 Ω, data upon request 80 mm (5 in) 6.9 Ω 600 W 00 W 00.5 db mm ( in) Copper 9 mm (0.75 in) mm (0. in). T Neodymium Ring Both Sides THIELE & SMALL PARAMET 5. Ω Qes 0. Qms. Qts 0. Vas 0 dm (.5 ft ) Sd 855 cm (.5 in ) η 0. % ± 8 mm ± 0 mm 0 g 5.5 T m.5 mh 8 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 9 mm (5.5 in) 7 mm (.7 in) Baffle Cutout Diameter 5 mm (.9 in) 77 mm (7.0 in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver.7 dm (0. ft ) 5.6 kg (. lb) 7 kg (5. lb) 5x5x mm (6.7x6.7x8.8 in) RCK5NW76-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 6

62 5L88 WOOFER 00 W 99 db 88 mm (.5 in) aluminium voice coil Double silicone spider with optimized compliance demodulating ring for very low distortion Neodymium magnet allows a very light yet powerful motor assembly 80 mm (5 in) 6 Ω Nominal (AES) 700 W Continuous Program 00 W Sensitivity (W/m) 99 db mm (.5 in) Winding mm (0.85 in) Magnetic Gap 0 mm (0.9 in).5 T Neodymium Inside Slug Front Side Also available in and 6 Ω, data upon request THIELE & SMALL PARAMET 5 5 Ω Qes 0.6 Qms 6. Qts 0. Vas 6 dm (.5 ft ) Sd 855 cm (.5 in ) η 0. % ± 8 mm ± 0 mm 0 g 0. T m.5 mh 5 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 9 mm (5.5 in) 7 mm (.7 in) Baffle Cutout Diameter 5 mm (.9 in) 77 mm (6.97 in) Flange and Gasket Thickness mm (0.5 in) Air volume occupied by driver.5 dm (0. ft ).6 kg (0. lb) 5.9 kg ( lb) 5x5x mm (6.7x6.7x8.8 in) RCK5L88-8 Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 6

63 5NA00 WOOFER 600 W 98 db 00 mm ( in) aluminium voice coil FEA optimized Neodymium magnet assembly Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression 80 mm (5 in) 6.6 Ω Nominal (AES) 800 W Continuous Program 600 W Sensitivity (W/m) 98 db mm ( in) Winding mm (0.9 in) Magnetic Gap mm (0. in). T Neodymium Inside Slug Front Side THIELE & SMALL PARAMET 7 5. Ω Qes 0.9 Qms 6. Qts 0.8 Vas 88 dm (. ft ) Sd 855 cm (.5 in ) η 0.9 % ± 0 mm ± 9 mm 6 g 6. T m. mh 6 within the specified range -0. Continuous Program Power is defined as db greater than the Applied RMS Voltage is set to.8v for 8 ohms. 9 mm (5.5 in) 7 mm (.7 in) Baffle Cutout Diameter 5 mm (.9 in) 80 mm (7.09 in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver 6 dm (0. ft ) 9. kg (0.5 lbs) 0.6 kg (.7 lb) 5x5x mm (6.7x6.7x8.8 in) RCK5NA00-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 6

64 5BG00 SUBWOOFER 000 W 9.5 db 00 mm ( in) copper voice coil demodulating ring for very low distortion FEA optimized Neodymium magnet assembly Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression 80 mm ( in) Minumum Impedance 6 Ω Nominal (AES) 000 W Continuous Program 000 W Sensitivity (W/m) 9.5 db mm ( in) Copper Winding 7 mm (.06 in) Magnetic Gap mm (0. in).5 T Neodymium Inside Slug Both Sides Also available in Ω, data upon request THIELE & SMALL PARAMET 6 5. Ω Qes 0.9 Qms 5.0 Qts 0. Vas 8 dm (.9 ft ) Sd 855 cm (.5 in ) η % ± 0.5 mm ± mm 0 g T m.6 mh 7 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. Average SPL from 00 to 9 mm (5.5 in) 7 mm (.7 in) Baffle Cutout Diameter 5 mm (.9 in) 89 mm (7.5 in) Flange and Gasket Thickness mm (0.9 in) Air volume occupied by driver 6 dm (0. ft ) 8.6 kg (8.9 lb) 9.9 kg (.8 lb) 5x5x mm (6.7x6.7x8.8 in) RCK5BG Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 6

65 5NBX00 SUBWOOFER 000 W 97 db 00 mm ( in) copper voice coil FEA optimized Neodymium magnet assembly demodulating ring for very low distortion Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in Ω, data upon request 80 mm (5 in) 6. Ω 000 W 000 W 97 db mm ( in) Copper 5 mm (.0 in) mm (0. in). T Neodymium Ring Both Sides THIELE & SMALL PARAMET 6 5. Ω Qes 0. Qms. Qts 0.9 Vas 5 dm (. ft ) Sd 855 cm (.5 in ) η 0 % ± 0 mm ± 0 mm 5 g 5 T m mh 6 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 9 mm (5.5 in) 7 mm (6.7 in) Baffle Cutout Diameter 5 mm (.9 in) 79 mm (7.05 in) Flange and Gasket Thickness mm (0.55 in) Air volume occupied by driver 6 dm (0. ft ) 9 kg (9.8 lb) 0. kg (. lb) 5x5x mm (6.7x6.7x8.8 in) RCK5NBX00-8 Average SPL from 50 to 500. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 65

66 5SW00 SUBWOOFER 000 W 95 db 00 mm ( in) split winding copper voice coil Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression demodulating ring for very low distortion 57 mm peak-to-peak excursion before damage 80 mm (5 in) 6.5 Ω Nominal (AES) 500 W Continuous Program 000 W Sensitivity (W/m) 95 db mm ( in) Copper Winding mm (.6 in) Magnetic Gap 6 mm (0.6 in).5 T Neodymium Inside Slug Both Sides Also available in Ω, data upon request THIELE & SMALL PARAMET 7 5. Ω Qes 0. Qms.8 Qts 0. Vas 0 dm (.9 ft ) Sd 855 cm (.5 in ) η 0.6 % ±.5 mm ± mm 76 g 5.6 T m. mh 08 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 9 mm (5.5 in) 7 mm (.7 in) Baffle Cutout Diameter 5 mm (.9 in) 90 mm (7.5 in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver 6 dm (0. ft ) 9.5 kg ( lb) 0.8 kg (.8 lb) 5x5x mm (6.7x6.7x8.8 in) RCK5SW00-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 66

67 5SW5 SUBWOOFER 00 W 96 db 6 mm (.5 in) split winding copper voice coil Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression demodulating ring for very low distortion 60 mm peak-to-peak excursion before damage 80 mm (5 in) 6.5 Ω Nominal (AES) 700 W Continuous Program 00 W Sensitivity (W/m) 96 db mm (.5 in) Copper Winding mm (. in) Magnetic Gap mm (0.55 in).5 T Neodymium Inside Slug Both Sides Also available in Ω, data upon request THIELE & SMALL PARAMET 5 5. Ω Qes 0.5 Qms. Qts 0. Vas 0 dm (.9 ft ) Sd 855 cm (.5 in ) η 0.8 % ±.5 mm ± mm 00 g 0 T m.8 mh 0 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 9 mm (5.5 in) 7 mm (6.7 in) Baffle Cutout Diameter 5 mm (.9 in) 9 mm (7.6 in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver 7 dm (0.5 ft ) kg (6. lb). kg (9. lb) 5x5x mm (6.7x6.7x8.8 in) RCK5SW5-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 67

68 8NBX00 SUBWOOFER 00 W 96.5 db 00 mm ( in) split winding copper voice coil Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression demodulating ring for very low distortion 57 mm peak-to-peak excursion before damage Nominal (AES) Continuous Program Sensitivity (W/m) Winding Magnetic Gap Also available in Ω, data upon request 60 mm (8 in) 6 Ω 00 W 00 W 96.5 db mm ( in) Copper 5 mm ( in) mm (0. in). T Neodymium Ring Both Sides THIELE & SMALL PARAMET 5 5. Ω Qes 0. Qms 5.6 Qts 0.8 Vas 98 dm (7 ft ) Sd 0 cm (87.6 in ) η 0 % ± 0 mm ± mm 7 g.8 T m.85 mh 87 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 60 mm (8 in) 0 mm (7. in) Baffle Cutout Diameter mm (6.6 in) 08 mm (8.9 in) Flange and Gasket Thickness mm (0.55 in) Air volume occupied by driver 8.5 dm (0.0 ft ) 9. kg (0.5 lb) 0.9 kg (.0 lb) 500x95x75 mm (9.68x9.8x0.8 in) RCK8NBX00-8 Average SPL from 00 to 500. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 68

69 8NW00 SUBWOOFER 00 W 98 db 00 mm ( in) copper voice coil FEA optimized Neodymium magnet assembly allows the highest force factor and excursion capability Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression 60 mm (8 in) 6. Ω Nominal (AES) 00 W Continuous Program 00 W Sensitivity (W/m) 98 db mm ( in) Copper Winding 5 mm ( in) Magnetic Gap mm (0.5 in). T Neodymium Inside Slug Both Sides Also available in Ω, data upon request THIELE & SMALL PARAMET 5. Ω Qes 0.7 Qms. Qts 0.6 Vas 5 dm (8.9 ft ) Sd 0 cm (87.6 in ) η 0.7 % ± 9 mm ± mm g 8 T m.7 mh within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 60 mm (8 in) 0 mm (7. in) Baffle Cutout Diameter mm (6.6 in) 09 mm (8. in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver 8.5 dm (0.0 ft ) 9. kg (0.5 lb) 0.9 kg (.0 lb) 500x95x75 mm (9.68x9.8x0.8 in) RCK8NW00-8 Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 69

70 8SW00 SUBWOOFER 000 W 97 db 00 mm ( in) split winding copper voice coil demodulating ring for very low distortion Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression 57 mm peak-to-peak excursion before damage 60 mm (8 in) Minumum Impedance 6.5 Ω Nominal (AES) 500 W Continuous Program 000 W Sensitivity (W/m) 97 db mm ( in) Copper Winding mm (.6 in) Magnetic Gap mm (0.55 in).5 T Neodymium Inside Slug Both Sides Also available in Ω, data upon request THIELE & SMALL PARAMET 5 5. Ω Qes 0. Qms 5.9 Qts 0.8 Vas 80 dm (6. ft ) Sd 0 cm (87.6 in ) η 0.9 % ±.5 mm ± 6 mm g 6. T m. mh 87 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 60 mm (8 in) mm (7. in) Baffle Cutout Diameter mm (6.6 in) 9 mm (9. in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver 0 dm (0.5 ft ) 0 kg ( lb).8 kg (6.0 lb) 500x500x00 mm (9.68x9.68x.8 in) RCK8SW00-8 Average SPL from 00 to 500. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 70

71 8SW5 SUBWOOFER 00 W 97 db 6 mm (.5 in) split winding copper voice coil Double silicone spider with optimized compliance Ventilated voice coil gap fpr reduced power compression demodulating ring for very low distortion 60 mm peak-to-peak excursion before damage 60 mm (8 in) 6.5 Ω Nominal (AES) 700 W Continuous Program 00 W Sensitivity (W/m) 97 db mm (.5 in) Copper Winding mm (. in) Magnetic Gap mm (0.55 in).6 T Neodymium Inside Slug Both Sides Also available in Ω, data upon request THIELE & SMALL PARAMET 5. Ω Qes 0. Qms 5.6 Qts 0. Vas 87.0 dm (6.5 ft ) Sd 0 cm (87.6 in ) η 0.9 % ± mm ± 6 mm 75 g 0. T m.9 mh 00 within the specified range -0. Continuous Program Power is defined as db greater than the Applied RMS Voltage is set to.8v for 8 ohms. 60 mm (8 in) mm (7. in) Baffle Cutout Diameter mm (6.6 in) mm (9.5 in) Flange and gasket thickness 6 mm (0.6 in) Air volume occupied by driver 0.5 dm (0.7 ft ).7 Kg (0. lb).9 kg (0.6 lb) 500x500x00 mm (9.68x9.68x.8 in) RCK8SW5-8 Average SPL from 50 to 500. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 7

72 8DS5 SUBWOOFER Preliminary data 00 W 98 db 6 mm (.5 in) split four layer winding aluminium voice coil Neodymium magnet allows a very high force factor and linear excursion Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression demodulating ring for very low distortion 60 mm peak-to-peak excursion before damage mm (8 in) Minumum Impedance 7 Ω Nominal (AES) 700 W Continuous Program 00 W Sensitivity (W/m) 98 db mm (.5 in) Winding 0 mm (.57 in) Magnetic Gap mm (0.55 in) 0.8 T Neodymium Inside Slug Both Sides Also available in Ω, data upon request THIELE & SMALL PARAMET Ω Qes 0. Qms. Qts 0. Vas 68 dm (5.9 ft ) Sd 0 cm (87.6 in ) η 0. % ± 6.5 mm ± mm 0 g 9 T m.85 mh within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 60 mm (8 in) 0 mm (7. in) Baffle Cutout Diameter mm (6.6 in) mm (9.5 in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver 0 dm (0.5 ft ) kg (6.6 lb).6 kg (9.98 lb) 500x95x75 mm (9.68x9.8x0.8 in) RCK8DS5-8 Average SPL from 00 to 500. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 7

73 8IPAL SUBWOOFER 00 W 97 db 6 mm (.5 in) split winding aluminium voice coil Neodymium magnet allows a very high force factor and linear excursion Ventilated voice coil gap for reduced power compression Available to oem manufacturers only 80 mm peak-to-peak excursion before damage 60 mm (8 in) Ω. Ω Nominal (AES) 700 W Continuous Program 00 W Sensitivity (W/m) 97 db mm (.5 in) Winding mm (.7 in) Magnetic Gap mm (0.7 in).5 T Neodymium Inside Slug Both Sides THIELE & SMALL PARAMET. Ω Qes 0. Qms. Qts 0. Vas 6 dm (5.8 ft ) Sd 0 cm (87.6 in ) η 0. % ± 0.0 mm ± 5 mm 0 g.5 T m 0.65 mh 8 within the specified range -0. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 60 mm (8.0 in) mm (7. in) Baffle Cutout Diameter mm (6.6 in) 6 mm (0.8 in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver 0.5 dm (0.7 ft ) 6.6 kg (6.6 lb) 8.9 kg (,67 lb) 570x570x0 mm (.x.x.60 in) RCK8IPALM Average SPL from 00 to 000. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 7

74 DS5 SUBWOOFER 00 W 99 db 6 mm (.5 in) four layer winding aluminium voice coil Neodymium magnet allows a very high force factor and linear excursion Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression demodulating ring for very low distortion 60 mm peak-to-peak excursion before damage mm ( in) 6.5 Ω Nominal (AES) 700 W Continuous Program 00 W Sensitivity (W/m) 99 db mm (.5 in) Winding 6 mm (. in) Magnetic Gap mm (0.55 in) 0.8 T Neodymium Inside Slug Both Sides Also available in Ω, data upon request THIELE & SMALL PARAMET 0 5. Ω Qes 0. Qms 0.0 Qts 0. Vas 69.0 dm (9.5 ft ) Sd 680 cm (60. in ) η 0.0 % ± 5 mm ± 6.5 mm 07 g 0.8 T m.6 mh 5 within the specified range -0. defined as db greater then the Applied RMS Voltage is set to.8 V for 8 ohms. 57 mm (.5 in) 57 mm (0.7 in) Baffle Cutout Diameter 508 mm (0 in) 55 mm (0.0 in) Flange and Gasket Thickness mm (0.5 in) Air volume occupied by driver 5 dm (0.5 ft ).8 kg (.6 lb) 7. kg (7.9 lb) 570x570x0 mm (.x.x.60 in) RCKDS5-8 Average SPL from 00 to 500. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 7

75 SW5 SUBWOOFER 000 W 96 db 5 mm (6 in) split winding copper voice coil Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression demodulating ring for very low distortion 60 mm peak-to-peak excursion before damage 50 mm ( in) Ω. Ω Nominal (AES) 000 W Continuous Program 000 W Sensitivity (W/m) 96 db mm (6 in) Copper Winding 0 mm (.8 in) Magnetic Gap mm (0.5 in). T Neodymium Inside Slug Both Sides Also available in 8 6 Ω, data upon request THIELE & SMALL PARAMET. Ω Qes 0. Qms 7.0 Qts 0. Vas 00.0 dm (7.0 ft ) Sd 680 cm (60. in ) η 0. % ± 5 mm ± 6 mm 60 g.5 T m.5 mh 0 within the specified range -0. defined as db greater then the Applied RMS Voltage is set to.8 V for 8 ohms. 57 mm (.5 in) 57 mm (0.7 in) Baffle Cutout Diameter 508 mm (0 in) 6 mm (0. in) Flange and Gasket Thickness 6 mm (0.6 in) Air volume occupied by driver 6 dm (0.56 ft ) 8.5 kg (0.7 lb) 0.8 kg (5.86 lb) 570x570x0 mm (.x.x.60 in) RCKSW5- Average SPL from 00 to 500. Thiele-Small parameters are measured after a high level 0 sine wave preconditioning test. bcspeakers.com 75

76 FE COAX IALS Coaxial loudspeakers combine the features of our best cone loudspeakers and compression drivers into a one-piece, pointsource solution. Their format enables electroacoustical designers to build very compact, versatile systems. The majority of our more recent FCX and FHX series coaxial designs feature a single magnet structure for both the woofer and high frequency driver. This solution offers a more compact, lightweight, and cost effective solution than dual driver coaxial alternatives, with little or no impact on overall performance. All coaxial loudspeaker cones are treated with a protective waterproof coating and a fine mesh HF driver protection screen, allowing operation in a wide range of environments. The waveguides loaded on the compression drivers are designed in accordance with the latest theories, resulting in uniform angular coverage and high acoustical load, with very low distortion. Many of our coaxial loudspeakers are available in alternative impedance configurations. Please ask your B&C representative for more information. bcspeakers.com 76

77 FE COAX IALS 5FCX FE- COAXIAL 00 W 9 db 70 nominal coverage Nom. Diameter 7 mm (5 in) Nom. Impedance 6.5 Ω (), 6.5 Ω (HF) Dispersion Angle 70 Ferrite ()/Neo Ring (HF) Waterproof cone treatment Front side UNIT Sensitivity (W/m) 9 db Nom. (AES) 00 W Continuous Program 00 W mm (.7 in) Copper.07 T Kapton Winding 9.0 mm (0.5 in) Magnetic Gap 6.0 mm (0. in) HF UNIT Sensitivity (W/m) 07.5 db Nom. (AES) 0 W Continuous Program 0 W Diaphragm Material commended Crossover 5 Inductance Included by 6 db down points. Applied RMS Voltage is set to.8v. - Two hour test made with continuous pink noise signal (6 db crest factor) within the range -0. Loudspeaker in free air. 5 mm (.5 in) Polyester.5 k.65 T 0. mh 6 mm (5.5 in) mm (5.6 in) Baffle Cutout Diameter mm (.8 in) 0 mm (. in) Flange and Gasket Thickness 8 mm (0. in).85 kg (. lb). kg (.85 lb) 55x55x50 mm (0.0x0.0x5.90 in) HF - Two hour test made with continuous pink noise signal (6 db crest factor) within the range from the recommended crossover frequency to 0 k. and HF Power calculated on rated minimum impedance. THIELE & SMALL PARAMET Ω Qes 0.5 Qms 7.8 Qts 0.5 Vas 7 dm (0.5 ft ) Sd 95 cm (.7 in ) η % ± mm ± 5 mm g 0.5 T m 0.8 mh HF RCK005FCX-8 MMDDE5-8 defined as db greater than the 5 db/oct. or higher slope high-pass filter. bcspeakers.com 77

78 FE COAX IALS 6FHX5 FE- COAXIAL 00 W 9 db 70 nominal coverage Nom. Diameter 70 mm (6.5 in) Nom. Impedance 6.5 Ω (), 7 Ω (HF) Dispersion Angle 70 Ferrite ()/Neo Ring (HF) Waterproof cone treatment Front side UNIT Sensitivity (W/m) 9 db Nom. (AES) 50 W Continuous Program 00 W 5 mm ( in) Copper.05 T Kapton Winding.0 mm (0,5 in) Magnetic Gap 6.0 mm (0. in) HF UNIT Sensitivity (W/m) 08.5 db 0 W Continuous Program 0 W Diaphragm Material commended Crossover 5 Inductance Included by 6 db down points. Applied RMS Voltage is set to.8v. - Two hour test made with continuous pink noise signal (6 db crest factor) within the range -0. Loudspeaker in free air. 5 mm ( in) Polyester.5 k.65 T 0. mh 87 mm (7. in) 7 mm (6.7 in) Baffle Cutout Diameter 6 mm (5.75 in) mm (.8 in) Flange and Gasket Thickness mm (0.7 in).7 kg (5.9 lb).05 kg (6.7 lb) 55x55x50 mm (0.0x0.0x5.90 in) HF - Two hour test made with continuous pink noise signal (6 db crest factor) within the range from the recommended crossover frequency to 0 k. and HF Power calculated on rated minimum impedance. THIELE & SMALL PARAMET Ω Qes 0. Qms 7.8 Qts 0.7 Vas 5 dm (0.8 ft ) Sd cm (0.5 in ) η % ± 5 mm ± 5.7 mm 6 g. T m mh HF RCK06FHX5-8 MMDDE5-8 defined as db greater than the 5 db/oct. or higher slope high-pass filter. bcspeakers.com 78

79 FE COAX IALS 8CX FE COAXIAL 00 W 9 db 00 nominal coverage Nom. Diameter 0 mm (8 in) Nom. Impedance 6. Ω (), 7. Ω (HF) Dispersion Angle 00 Ferrite Ring Waterproof cone treatment None UNIT Sensitivity (W/m) 9 db Nom. (AES) 00 W Continuous Program 00 W 5 mm (.0 in) Copper. T Kapton Winding 6.0 mm (0.6 in) Magnetic Gap 8.0 mm (0. in) HF UNIT Sensitivity (W/m) 0 db Nom. (AES) 5 W Continuous Program 50 W Diaphragm Material commended Crossover 5 Inductance Also available in 6 Ω, data upon request Included by 6 db down points. Applied RMS Voltage is set to.8v. - Two hour test made with continuous pink noise signal (6 db crest factor) within the range -0. Loudspeaker in free air. 5 mm (.0 in) Polyester.5 k.5 T 0. mh 5 mm (8.8 in) 0 mm (8. in) Baffle Cutout Diameter 87 mm (7. in) 5 mm (5. in) Flange and Gasket Thickness mm (0. in).0 kg (8.8 lb).7 kg (0. lb) 95xx75 mm (.6x.6x6.89 in) HF - Two hour test made with continuous pink noise signal (6 db crest factor) within the range from the recommended crossover frequency to 0 k. and HF Power calculated on rated minimum impedance. THIELE & SMALL PARAMET 7 5. Ω Qes 0.9 Qms. Qts 0.6 Vas 5 dm (0.55 ft ) Sd 0 cm (. in ) η 0.5 % ± 5 mm ± 5.5 mm g.5 T m. mh 89 HF RCK008CX-8 MMD0-8 defined as db greater than the 5 db/oct. or higher slope high-pass filter. bcspeakers.com 79

80 FE COAX IALS 8FCX5 FE COAXIAL 500 W 96 db 00 nominal coverage Single ferrite magnet assembly Nom. Diameter 0 mm (8 in) Nom. Impedance 6 Ω (), 7 Ω (HF) Dispersion Angle 00 Ferrite Ring Waterproof cone treatment Front side UNIT Sensitivity (W/m) 96 db Nom. (AES) 50 W Continuous Program 500 W 5 mm ( in).0 T Winding 7.5 mm (0.69 in) Magnetic Gap 8.0 mm (0. in) HF UNIT Sensitivity (W/m) 0 db 50 W Continuous Program 00 W Diaphragm Material commended Crossover 5 Inductance mm (.7 in) Polyimide.8 k.8 T 0. mh 5 mm (8.8 in) 0 mm (8. in) Baffle Cutout Diameter 87 mm (7. in) 8 mm (.6 in) Flange and Gasket Thickness 0 mm (0.7 in) 5. kg (. lb) 5.6 kg (. lb) 95xx75 mm (.6x.6x6.89 in) Included by 6 db down points. Applied RMS Voltage is set to.8v. - Two hour test made with continuous pink noise signal (6 db crest factor) within the range -0. Loudspeaker in free air. THIELE & SMALL PARAMET 69.9 Ω Qes 0.6 Qms 6. Qts 0. Vas 6 dm (0.56 ft ) Sd 0 cm (. in ) η 0. % ± 6.5 mm ± 6 mm g.5 T m 0.9 mh 9 HF HF - Two hour test made with continuous pink noise signal (6 db crest factor) within the range from the recommended crossover frequency to 0 k. and HF Power calculated on rated minimum impedance. RCK008FCX-8 MMD00-8 defined as db greater than the 5 db/oct. or higher slope high-pass filter. bcspeakers.com 80

81 FE COAX IALS 0FCX6 FE COAXIAL 500 W 95 db 70 nominal coverage Single ferrite magnet assembly Nom. Diameter 50 mm (0 in) Nom. Impedance 6. Ω (), 7 Ω (HF) Dispersion Angle 70 Ferrite Ring Waterproof cone treatment Front side UNIT Sensitivity (W/m) 95 db Nom. (AES) 50 W Continuous Program 500 W 6 mm (.5 in) Copper 0.96 T Kapton Winding.0 mm (0.5 in) Magnetic Gap 8.0 mm (0. in) HF UNIT Sensitivity (W/m) 0 db Nom. (AES) 80 W Continuous Program 60 W Diaphragm Material commended Crossover 5 Inductance Included by 6 db down points. Applied RMS Voltage is set to.8v. - Two hour test made with continuous pink noise signal (6 db crest factor) within the range -0. Loudspeaker in free air. 65 mm (.5 in) Titanium. k.6 T 0.5 mh 6 mm (0. in) 5 mm (9.6 in) Baffle Cutout Diameter 0 mm (8.8 in) 0 mm (5.5 in) Flange and Gasket Thickness.5 mm (0.5in) 5.65 kg (.8 lb) 6.5 kg (. lb) 60x60x00 mm (.7x.7x7.87 in) HF - Two hour test made with continuous pink noise signal (6 db crest factor) within the range from the recommended crossover frequency to 0 k. and HF Power calculated on rated minimum impedance. THIELE & SMALL PARAMET Ω Qes 0. Qms 7.9 Qts 0. Vas 5 dm (0.89 ft ) Sd 0 cm (9. in ) η 0. % ± 5.5 mm ± 6 mm 6.5 g. T m. mh HF RCK0FCX6-8 MMD60TN-8M defined as db greater than the 5 db/oct. or higher slope high-pass filter. bcspeakers.com 8

82 FE COAX IALS FHX76 FE COAXIAL 700 W 98 db 60 x 0 nominal coverage Modified exponential horn flare for improved acoustic loading and controlled coverage Single ferrite magnet assembly Nom. Diameter 0 mm (6.5 in) Nom. Impedance 6 Ω (), 7. (HF) Dispersion Angle 60 x 0 Ferrite Ring Waterproof cone treatment Front side UNIT Sensitivity (W/m) 98 db Nom. (AES) 50 W Continuous Program 700 W 76 mm ( in) Copper.0 T Winding 6.5 mm (0.65 in) Magnetic Gap 8.0 mm (0. in) HF UNIT Sensitivity (W/m) 06 db Nom. (AES) 80 W Continuous Program 60 W 75 mm ( in) Diaphragm Material Titanium commended Crossover 5. k.8 T Inductance 0. mh 5 mm (. in) 98 mm (.7 in) Baffle Cutout Diameter 8 mm (. in) 69 mm (6.65 in) Flange and Gasket Thickness mm (0.5 in) 8.5 kg (8.7 lb) 0. kg (.7 lb) 5x5x mm (6.7x6.7x8.8 in) Also available in Ω, data upon request Also available FCX76 (without horn/ 80 disp.) Included by 6 db down points. Applied RMS Voltage is set to.8v. - Two hour test made with continuous pink noise signal (6 db crest factor) within the range -0. Loudspeaker in free air. THIELE & SMALL PARAMET 8 5. Ω Qes 0.6 Qms 5. Qts 0. Vas 88 dm (. ft ) Sd 5 cm (80.9 in ) η 0.7 % ± 6.5 mm ± mm 7 g. T m.6 mh HF HF - Two hour test made with continuous pink noise signal (6 db crest factor) within the range from the recommended crossover frequency to 0 k. and HF Power calculated on rated minimum impedance. RCKFHX76-8 MMDBTN-8M defined as db greater than the 5 db/oct. or higher slope high-pass filter. bcspeakers.com 8

83 FE COAX IALS 5FCX76 FE COAXIAL 800 W 98 db 80 nominal coverage Single ferrite magnet assembly Nom. Diameter 80 mm (6.5 in) Nom. Impedance 6 Ω (), 7. (HF) Dispersion Angle 80 Ferrite Ring Waterproof cone treatment Front side UNIT Sensitivity (W/m) 98 db Nom. (AES) 00 W Continuous Program 800 W 76 mm ( in) Copper.0 T Winding 6.5 mm (0.65 in) Magnetic Gap 8.0 mm (0. in) HF UNIT Sensitivity (W/m) 05 db Nom. (AES) 80 W Continuous Program 60 W Diaphragm Material commended Crossover 5 Inductance 75 mm ( in) Titanium. k.9 T 0. mh 9 mm (5.5 in) 7 mm (6.7 in) Baffle Cutout Diameter 5 mm (.9 in) 99 mm (7.8 in) Flange and Gasket Thickness 6 mm (0.6 in) 9 kg (9.8 lb) 9.7 kg (. lb) 500x95x75 mm (9.68x9.8x0.8 in) Also available 5FHX76 (with 60 x 0 horn) Included by 6 db down points. Applied RMS Voltage is set to.8v. - Two hour test made with continuous pink noise signal (6 db crest factor) within the range -0. Loudspeaker in free air. THIELE & SMALL PARAMET 0 5. Ω Qes 0.7 Qms 8. Qts 0. Vas 87 dm (6.6 ft ) Sd 855 cm (.5 in ) η 0.5 % ± 6.5 mm ± 7.5 mm 87 g 5.6 T m. mh 85 HF HF - Two hour test made with continuous pink noise signal (6 db crest factor) within the range from the recommended crossover frequency to 0 k. and HF Power calculated on rated minimum impedance. RCK5FCX76-8 MMDBTN-8M defined as db greater than the 5 db/oct. or higher slope high-pass filter. bcspeakers.com 8

84 COAX IALS Coaxial loudspeakers combine the features of our best cone loudspeakers and compression drivers into a one-piece, pointsource solution. Their format enables electroacoustical designers to build very compact, versatile systems. The majority of our more recent FCX and FHX series coaxial designs feature a single magnet structure for both the woofer and high frequency driver. This solution offers a more compact, lightweight, and cost effective solution than dual driver coaxial alternatives, with little or no impact on overall performance. All coaxial loudspeaker cones are treated with a protective waterproof coating and a fine mesh HF driver protection screen, allowing operation in a wide range of environments. The waveguides loaded on the compression drivers are designed in accordance with the latest theories, resulting in uniform angular coverage and high acoustical load, with very low distortion. Many of our coaxial loudspeakers are available in alternative impedance configurations. Please ask your B&C representative for more information. bcspeakers.com 8 bcspeakers.com 8

85 COAX IALS CXN6 COAXIAL Preliminary data 00 W 88 db 70 nominal coverage mm (0.85 ) HF unit exit diameter Neodymium magnet allows a very light yet powerful motor assembly demodulating ring for very low distortion Nom. Diameter 00 mm ( in) Nom. Impedance 6. Ω (), 6.5 Ω (HF) Dispersion Angle 70 Neodymium Inside Slug None UNIT Sensitivity (W/m) 88 db Nom. (AES) 00 W Continuous Program 00 W mm (. in) Copper.0 T Winding.0 mm (0. in) Magnetic Gap 6.0 mm (0. in) HF UNIT Sensitivity (W/m) 99 db Nom. (AES) 5 W Continuous Program 50 W Diaphragm Material commended Crossover 5 Inductance 6 mm (. in) HT Polymer.0 k.8 T 0. mh 7 mm (5.0 in) mm (.9 in) Baffle Cutout Diameter 0 mm (.06 in) 80 mm (.5 in) Flange and Gasket Thickness mm (0.0 in) 0.55 kg (. lb) 0.75 kg (.65 lb) 0x0x5 mm (8.7x8.7x.9 in) Included by 6 db down points. Applied RMS Voltage is set to.8v. - Two hour test made with continuous pink noise signal (6 db crest factor) within the range -0. Loudspeaker in free air. THIELE & SMALL PARAMET Ω Qes 0.76 Qms.5 Qts 0.7 Vas.9 dm (0.07 ft ) Sd 56.0 cm (8.68 in ) η % ± mm ± 5 mm 6 g 5. T m 0.8 mh 0 HF HF - Two hour test made with continuous pink noise signal (6 db crest factor) within the range from the recommended crossover frequency to 0 k. and HF Power calculated on rated minimum impedance. RCK0CXN76-8 MMDDE0-8 defined as db greater than the 5 db/oct. or higher slope high-pass filter. bcspeakers.com 85

86 COAX IALS 6HCX5 COAXIAL 00 W 9 db 70 nominal coverage Single Neodymium magnet assembly Nom. Diameter 70 mm (6.5 in) Nom. Impedance 6 Ω (), 7.5 Ω (HF) Dispersion Angle 70 Neodymium Ring Waterproof cone treatment Front side UNIT Sensitivity (W/m) 9 db Nom. (AES) 50 W Continuous Program 00 W 5 mm ( in) Copper. T Kapton Winding.0 mm (0.5 in) Magnetic Gap 6.0 mm (0. in) HF UNIT Sensitivity (W/m) 05 db Nom. (AES) 5 W Continuous Program 50 W Diaphragm Material commended Crossover 5 Inductance 6 mm (. in) Polyester. k.8 T 0.06 mh 87 mm (7. in) 7 mm (6.7 in) Baffle Cutout Diameter 6 mm (5.7 in) 0 mm (. in) Flange and Gasket Thickness mm (0. in).55 kg (. lb).0 kg (. lb) 55x55x50 mm (0.0x0.0x5.90 in) Also available in 6 Ω, data upon request Included by 6 db down points. Applied RMS Voltage is set to.8v. - Two hour test made with continuous pink noise signal (6 db crest factor) within the range -0. Loudspeaker in free air. HF - Two hours THIELE & SMALL PARAMET Ω Qes 0. Qms 7.5 Qts 0.8 Vas 5 dm (0.8 ft ) Sd cm (0.5 in ) η % ± 5 mm ± 5.5 mm 6 g 0.9 T m 0.8 mh HF test made with continuous pink noise signal (6 db crest factor) within the range from the recommended crossover frequency to 0 k. and HF Power calculated on rated minimum impedance. RCK06HCX5-8 MMD0-8 defined as db greater than the 5 db/oct. or higher slope high-pass filter. bcspeakers.com 86

87 COAX IALS 8CXN5 COAXIAL 500 W 97 db 00 nominal coverage Single Neodymium magnet assembly Nom. Diameter 0 mm (8 in) Nom. Impedance 6 Ω (), 7. Ω (HF) Dispersion Angle 00 Neodymium Ring Waterproof cone treatment Front side UNIT Sensitivity (W/m) 97 db Nom. (AES) 50 W Continuous Program 500 W 5 mm ( in) Aluminuim.5 T Winding 7.0 mm (0.67 in) Magnetic Gap 8.0 mm (0. in) HF UNIT Sensitivity (W/m) 0 db Nom. (AES) 50 W Continuous Program 00 W mm (.7 in) Diaphragm Material Polyimide commended Crossover 5.8 k.8 T Inductance 0. mh 5 mm (8.8 in) 0 mm (8. in) Baffle Cutout Diameter 87 mm (7. in) mm (. in) Flange and Gasket Thickness 0 mm (0. in).5 kg (5.5 lb). kg (6.8 lb) 95xx75 mm (.6x.6x6.89 in) Also available in and 6 Ω, data upon request Included by 6 db down points. Applied RMS Voltage is set to.8v. - Two hour test made with continuous pink noise signal (6 db crest factor) within the range -0. Loudspeaker in free air. THIELE & SMALL PARAMET 68.9 Ω Qes 0.9 Qms.7 Qts 0.7 Vas 7 dm (0.60 ft ) Sd 0 cm (. in ) η 0.8 % ± 6 mm ± 6 mm g.6 T m 0.9 mh HF HF - Two hour test made with continuous pink noise signal (6 db crest factor) within the range from the recommended crossover frequency to 0 k. and HF Power calculated on rated minimum impedance. RCK008HCX5-8 MMD00-8 defined as db greater than the 5 db/oct. or higher slope high-pass filter. bcspeakers.com 87

88 COAX IALS CXN76 COAXIAL 700 W 99 db 80 nominal coverage Single Neodymium magnet assembly Nom. Diameter 0 mm ( in) Nom. Impedance 6.5 Ω (), (HF) Dispersion Angle 80 Neodymium Ring Waterproof cone treatment Front side UNIT Sensitivity (W/m) 99 db Nom. (AES) 50 W Continuous Program 700 W 76 mm ( in) Copper.5 T Winding 6. mm (0.6 in) Magnetic Gap 8.0 mm (0. in) HF UNIT Sensitivity (W/m) 05 db Nom. (AES) 80 W Continuous Program 60 W Diaphragm Material commended Crossover 5 Inductance 75 mm ( in) Polyester/Titanium. k.9 T 0. mh 5 mm (. in) 98 mm (.7 in) Baffle Cutout Diameter 8 mm (. in) 70 mm (6.7 in) Flange and Gasket Thickness mm (0.55 in) 5 kg ( lb) 6. kg (.89 lb) 5x5x mm (6.7x6.7x8.8 in) Also available in Ω, data upon request Also available 5HCX76 (with 60 x 0 horn) Included by 6 db down points. Applied RMS Voltage is set to.8v. - Two hour test made with continuous pink noise signal (6 db crest factor) within the range -0. Loudspeaker in free air. HF - Two hours THIELE & SMALL PARAMET 5.0 Ω Qes 0. Qms 8.0 Qts 0.9 Vas 0 dm (. ft ) Sd 5 cm (80.9 in ) η 0. % ± mm ± 6 mm 7 g 7.6 T m 0.8 mh 0 HF test made with continuous pink noise signal (6 db crest factor) within the range from the recommended crossover frequency to 0 k. and HF Power calculated on rated minimum impedance. RCKCXN76-8 MMD90-8 defined as db greater than the 5 db/oct. or higher slope high-pass filter. bcspeakers.com 88

89 COAX IALS CXN88 COAXIAL Preliminary data 000 W 99 db 60 nominal coverage Single Neodymium magnet assembly demodulating ring for very low distortion Double silicone spider with optimized compliance Nom. Diameter 0 mm ( in) Nom. Impedance 6.6 Ω (), 8.5 Ω (HF) Dispersion Angle 60 Neodymium Ring Waterproof cone treatment Front side UNIT Sensitivity (W/m) 99 db Nom. (AES) 500 W Continuous Program 000 W 88 mm (.5 in) Aluminuim.0 T Winding.5 mm (0.85 in) Magnetic Gap 0.0 mm (0.9 in) HF UNIT Sensitivity (W/m) 05 db Nom. (AES) 80 W Continuous Program 60 W 75 mm (.0 in) Diaphragm Material Titanium commended Crossover 5. k.75 T Inductance 0. mh 5 mm (. in) 98 mm (.7 in) Baffle Cutout Diameter 8 mm (. in) 75 mm (6.89 in) Flange and Gasket Thickness mm (0.5 in) 6.0 kg (. lb) 7. kg (6.09 lb) 5x5x mm (6.7x6.7x8.8 in) Also available in and 6 Ω, data upon request Included by 6 db down points. Applied RMS Voltage is set to.8v. - Two hour test made with continuous pink noise signal (6 db crest factor) within the range -0. Loudspeaker in free air. THIELE & SMALL PARAMET Ω Qes 0.8 Qms 5.6 Qts 0.7 Vas 0 dm (. ft ) Sd 5 cm (80.9 in ) η 0. % ± 8.5 mm ± 9.0 mm 6 g. T m.05 mh 96 HF HF - Two hour test made with continuous pink noise signal (6 db crest factor) within the range from the recommended crossover frequency to 0 k. and HF Power calculated on rated minimum impedance. RCKCXN88-8 MMDDTN-8M defined as db greater than the 5 db/oct. or higher slope high-pass filter. bcspeakers.com 89

90 COAX IALS CXN76 COAXIAL 800 W 00 db 80 nominal coverage Single Neodymium magnet assembly Nom. Diameter 55 mm ( in) Nom. Impedance 6.5 Ω (), 8. Ω (HF) Dispersion Angle 80 Neodymium Ring Waterproof cone treatment Front Side UNIT Sensitivity (W/m) 00 db Nom. (AES) 00 W Continuous Program 800 W 76 mm ( in) Copper.5 T Winding 7.0 mm (0.67 in) Magnetic Gap 8.0 mm (0. in) HF UNIT Sensitivity (W/m) 05 db Nom. (AES) 5 80 W Continuous Program 6 60 W Diaphragm Material commended Crossover 7 Inductance Included by 6 db down points. Applied RMS Voltage is set to.8v - Two hour test made with continuous pink noise signal (6 db crest factor) within the range -0. Loudspeaker in free air. HF - Two hours test made with continuous pink noise signal (6 db crest factor) within the 75 mm ( in) Polyester/Titanium. k.8 T 0. mh 59 mm (. in) mm (.5 in) Baffle Cutout Diameter mm (.7 in) 88 mm (7. in) Flange and Gasket Thickness 5 mm (0.59 in) 5.6 kg (.5 lb) 7. kg (5.87 lb) 500x95x75 mm (9.68x9.8x0.8 in) Also available HCX76 (with 60 x 0 horn) THIELE & SMALL PARAMET 5 5. Ω Qes 0.9 Qms 8.5 Qts 0.8 Vas dm (.6 ft ) Sd 707 cm (09.59 in ) η 0.0 % ± 6 mm ± 8 mm 67 g 8. T m.0 mh 55 HF range from the recommended crossover frequency to 0 k. and HF Power calculated on rated minimum impedance. Applied RMS Voltage is set to.8v 5 hour test made with continuous pink noise signal (6 db crest factor) within the range from the recommended RCKCXN76-8 MMD90-8M crossover frequency to 0 k. 6 defined as db greater than the 7 db/oct. or higher slope high-pass filter. bcspeakers.com 90

91 COAX IALS 5HCX76 COAXIAL 800 W 99 db 60 x 0 nominal coverage Modified exponential horn flare for improved acoustic loading and controlled coverage Single Neodymium magnet assembly Nom. Diameter Nom. Impedance Dispersion Angle Waterproof cone treatment UNIT Sensitivity (W/m) Nom. (AES) Continuous Program Winding Magnetic Gap HF UNIT Sensitivity (W/m) Nom. (AES) Continuous Program 80 mm (5 in) 6.0 Ω (lf), 8.0 Ω (hf) x0 Neodymium Ring Front side 99 db 00 W 800 W 76 mm ( in) Copper.5 T 6.5 mm (0.65 in) 8.0 mm (0. in) 07 db 80 W 60 W Diaphragm Material commended Crossover 5 Inductance 75 mm ( in) Titanium. k.9 T 0. mh 9 mm (5.5 in) 7 mm (.7 in) Baffle Cutout Diameter 5 mm (.9 in) 00 mm (7.87 in) Flange and Gasket Thickness 6 mm (0.6 in) 5.6 kg (.5 lb) 7. kg (5.87 lb) 500x95x75 mm (9.68x9.8x0.8 in) Also available 5CXN76 (without horn / 80 disp) Included by 6 db down points. Applied RMS Voltage is set to.8v. - Two hour test made with continuous pink noise signal (6 db crest factor) within the range -0. Loudspeaker in free air. HF - Two hours THIELE & SMALL PARAMET 8 5. Ω Qes 0. Qms 5.8 Qts 0.8 Vas 6 dm (8.6 ft ) Sd 855 cm (.5 in ) η 0.7% ±.5 mm ± 6 mm 8 g 7.8 T m 0.9 mh 6 HF test made with continuous pink noise signal (6 db crest factor) within the range from the recommended crossover frequency to 0 k. and HF Power calculated on rated minimum impedance. RCK5HCX76-8 MMDBTN-8 defined as db greater than the 5 db/oct. or higher slope high-pass filter. bcspeakers.com 9

92 COAX IALS 5CXN88 COAXIAL Preliminary data 000 W 99 db 80 nominal coverage Single Neodymium magnet assembly demodulating ring for very low distortion Double silicone spider with optimized compliance Nom. Diameter 80 mm (5 in) Nom. Impedance 5. (), 8.5 Ω (HF) Dispersion Angle 80 Neodymium Ring Waterproof cone treatment Front side UNIT Sensitivity (W/m) 99 db Nom. (AES) 500 W Continuous Program 000 W 88 mm (.5 in) Aluminuim. T Winding.0 mm (0.87 in) Magnetic Gap.0 mm (0. in) HF UNIT Sensitivity (W/m) 05 db Nom. (AES) 80 W Continuous Program 60 W 75 mm (.0 in) Diaphragm Material Titanium commended Crossover 5. k.75 T Inductance 0. mh 9 mm (5. in) 7 mm (.7 in) Baffle Cutout Diameter 5 mm (.9 in) mm (. in) Flange and Gasket Thickness 8 mm (8.58 in) 5.6 kg (.5 lb) 7. kg (5.87 lb) 500x95x75 mm (9.68x9.8x0.8 in) Also available in and 6 Ω, data upon request Included by 6 db down points. Applied RMS Voltage is set to.8v. - Two hour test made with continuous pink noise signal (6 db crest factor) within the range -0. Loudspeaker in free air. THIELE & SMALL PARAMET 6.5 Ω Qes 0.9 Qms 8. Qts 0.8 Vas 7 dm (.8 ft ) Sd 855 cm (.5 in ) η 0. % ± 8 mm ± 9.5 mm 9 g 0. T m.0 mh 58 HF HF - Two hour test made with continuous pink noise signal (6 db crest factor) within the range from the recommended crossover frequency to 0 k. and HF Power calculated on rated minimum impedance. RCK5CXN88-8 MMDDTN-8M defined as db greater than the 5 db/oct. or higher slope high-pass filter. bcspeakers.com 9

93 FE HF B&C Speakers has been a market leader in compression driver technology for decades. Our reliability and performance is second to none. We continue to work with a wide variety of materials to further improve the performance of our HF devices. Through our modeling programs we are able to analyze every aspect of the driver, and study the impact of key components on each design. levels, and creates a smooth top end. HT Polyester provides superior power handling and higher output levels in the upper octave ranges. Standard features in our compression drivers include copper shorting rings, FEA optimized phase plugs and edgewound, copper-clad, aluminium voice coil (CCAW) wire. We use four different diaphragm materials: Mylar, pure Titanium, Polyimide, and High Temperature (HT) Polyester. Each material has its own unique benefits and qualities. Mylar allows for an exceptionally smooth transient. Pure Titanium provides superb power handling and excellent reliability in the field. Polyimide achieves very high power handling and bcspeakers.com 9

94 FE HF DE0 FE HF ER 0 W 07 db 5 mm ( in) aluminium voice coil " horn throat diameter Polyester diaphragm Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 5 mm ( in) 6. Ω 0 W 0 W 07 db commended crossover 5 Inductance Diaphragm Material.5-8 k.5 k 5 mm ( in) CCAW () 0. mh Polyester.55 T Ferrite Ring Two M5 holes 80 on 76 mm ( in) diameter 90 mm (.5 in) 5 mm (. in) ( unit) 0.8 kg (.8 lb) (8 units) 7.05 kg (5.5 lb) (8 units) 5x5x65 mm (9.5x9.5x6.5 in) placement Diaphragm MMD00-8 Also available in 6 Ω, data upon request Driver mounted on B&C ME 0 horn. hour test made with continuous pink noise signal (6 db crest factor) within the specified range. Power calculated on rated minimum impedance. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. Average SPL from 000 to db/oct. or higher slope high-pass filter. bcspeakers.com 9

95 FE HF DE FE HF ER 50 W 06 db 6 mm (. in) aluminium voice coil " horn throat diameter Polyester diaphragm Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 5 mm ( in) 7. 5 W 50 W 06 db commended crossover 5 Inductance Diaphragm Material.5-8 k. k 6 mm (. in) CCAW () 0. mh Polyester.5 T Ferrite Ring Two M5 holes 80 on 76 mm ( in) diameter 90 mm (.5 in) 9 mm ( in) ( unit) kg (. lb) (8 units) 8.9 kg (0 lb) (8 units) 5x5x65 mm (9.5x9.5x6.5 in) placement Diaphragm MMD0-8 Also available in 6 Ω, data upon request Also available DETC (Titanium diaphragm) Driver mounted on B&C ME 5 horn. hour test made with continuous within the specified range. Power calculated on rated minimum impedance. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms and V for 6 ohms. Average SPL from 000 to db/oct. or higher slope high-pass filter. bcspeakers.com 95

96 FE HF DETN FE HF ER 60 W 05 db 6 mm (. in) aluminium voice coil " horn throat diameter Titanium diaphragm Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 5 mm ( in) 7. Ω 0 W 60 W 05 db commended crossover 5 Inductance Diaphragm Material.5-8 k. k 6 mm (. in) CCAW () 0. mh Titanium.5 T Ferrite Ring Two M5 holes 80 on 76 mm ( in) diameter Three M6 holes 0 on 57 mm (. in) diameter 90 mm (.5 in) 9 mm ( in) ( unit). kg (. lb) (8 units) 9. kg (0.7 lb) (8 units) 5x5x65 mm (9.5x9.5x6.5 in) placement Diaphragm MMD0TN-8 Also available in 6 Ω, data upon request Also available DE (Polyester diaphragm) Driver mounted on B&C ME 5 horn. hour test made with continuous pink noise signal (6 db crest factor) within the specified range. Power calculated on rated minimum impedance. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms and V for 6 ohms. Average SPL from 000 to db/oct. or higher slope high-pass filter. bcspeakers.com 96

97 FE HF DE60 FE HF ER 80 W 07 db mm (.7 in) aluminium voice coil " horn throat diameter Polyester diaphragm Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 5 mm ( in) 7. Ω 0 W 80 W 07 db commended crossover 5 Inductance Diaphragm Material.5-8 k k mm (.7 in) CCAW () 0. mh Polyester.5 T Ferrite Ring Two M6 holes 80 on 76 mm ( in) diameter 0 mm ( in) 6 mm (. in) ( unit).6 kg (.5 lb) (8 units).9 kg (0.6 lb) (8 units) 5x5x65 mm (9.5x9.5x6.5 in) placement Diaphragm MMDDE60-8 Also available in 6 Ω, data upon request Also available DE00 (Titanium Diaphragm) Driver mounted on B&C ME 5 horn. hour test made with continuous within the specified range. Power calculated on rated minimum impedance. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms and V for 6 ohms. Average SPL from 000 to db/oct. or higher slope high-pass filter. bcspeakers.com 97

98 FE HF DE80 FE HF ER 0 W 06.5 db mm (.7 in) aluminium voice coil " horn throat diameter Polyimide diaphragm Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 5 mm ( in) 7. Ω 60 W 0 W 06.5 db commended crossover 5 Inductance Diaphragm Material - 7 k k mm (.7 in) CCAW () 0. mh Polyimide.5 T Ferrite Ring Two M6 holes 80 on 76 mm ( in) diameter 0 mm (.0 in) 6 mm (. in) ( unit).6 kg (.5 lb) (8 units).9 kg (0.6 lb) (8 units) 5x5x65 mm (9.5x9.5x6.5 in) placement Diaphragm MMDDE80-8 Also available in 6 Ω, data upon request Also available DE 00 (Titanium Diaphragm) Driver mounted on B&C ME 5 horn. Hours test made with continuous pink noise signal (6 db crest factor) within the specified range. Power calculated on rated minimum impedance. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms and V for 6 ohms Nominal Impedance. Average SPL from 500 to db/oct. or higher slope high-pass filter. Also available in the Polyester version: DE60 bcspeakers.com 98

99 FE HF DE50 FE HF ER 0 W 08.5 db mm (.7 in) aluminium voice coil " horn throat diameter Polyimide diaphragm Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 5 mm ( in) W 0 W 08.5 db commended crossover 5 Inductance Diaphragm Material - 8 k.6 k mm (.7 in) CCAW () 0. mh Polyimide.85 T Ferrite Ring Two M6 holes 80 on 76 mm ( in) diameter Three M6 holes 0 on 57 mm (. in) diameter 0 mm (.7 in) 6 mm (. in) ( unit). kg (.6 lb) ( units) 8.75 Kg (9. lb) ( units) 65x5x70 mm (0.x5.x6.69 in) placement Diaphragm MMDDE50-8 Also available in 6 Ω, data upon request Also available DE50TN (Titanium Diaphragm) Driver mounted on B&C ME 5 horn. hour test made with continuous within the specified range. Power calculated on rated minimum impedance. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. Average SPL from 600 to db/oct. or higher slope highpass filter. bcspeakers.com 99

100 FE HF DE68TN FE HF ER 60 W 08 db 65 mm (.5 in) aluminium voice coil Titanium diaphragm Ferrite magnet assembly with shorting copper cap. horn throat diameter Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 6 mm (. in) 7. Ω 80 W 60 W 08 db commended crossover 5 Inductance Diaphragm Material - 8 k. k 65 mm (.5 in) CCAW () 0.5 mh Titanium.75 T Ferrite Ring Two M6 holes 90 on 0 mm ( in) diameter 56 mm (6. in) 66 mm (.6 in) ( unit).8 kg (8.8 lb) ( units) 8.5 kg (8.9 lb) ( units) 0x0x90 mm (8.7x8.7x7.8 in) placement Diaphragm MMD68TN-8 Also available in 6 Ω, data upon request Driver mounted on B&C ME 90 horn. hour test made with continuous within the specified range. Power calculated on rated minimum impedance. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms and V for 6 ohms. Average SPL from 000 to db/oct. or higher slope high-pass filter. bcspeakers.com 00

101 FE HF DE60TN FE HF ER 0 W 07 db 75 mm ( in) aluminium voice coil " horn throat diameter Shorting coppercap for extended HF Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 6 mm (. in) 8.6 Ω 0 W 0 W 07 db commended crossover 5 Inductance Diaphragm Material - 8 k. k 75 mm ( in) CCAW () 0. mh Titanium.6 T Ferrite Ring Four M6 holes 90 on 0 mm ( in) diameter 56 mm (6. in) 66 mm (.6 in) ( unit). kg (9 lb) ( units) 8.8 kg (9. lb) ( units) 0x0x90 mm (8.7x8.7x7.8 in) placement Diaphragm MMDBTN-8M Also available in 6 Ω, data upon request Driver mounted on B&C ME 90 horn. hour test made with continuous within the range from the recommended crossover frequency to 0 k. impedance. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 db/oct. or higher slope high-pass filter. bcspeakers.com 0

102 FE HF DE8TN FE HF ER 0 W 06.5 db 75 mm ( in) aluminium voice coil " horn throat diameter Titanium diaphragm Shorting copper cap for extended HF Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 6 mm (. in) 8.5 Ω 0 W 0 W 06.5 db commended crossover 5 Inductance Diaphragm Material k.0 k 75 mm ( in) CCAW () 0. mh Titanium.8 T Ferrite Ring Four M6 holes 90 on 0 mm ( in) diameter 70 mm (6.7 in) 6 mm (.5 in) ( unit).5 kg (9.9 lb) ( units) 9.6 kg (. lb) ( units) 0x0x90 mm (8.7x8.7x7.8 in) placement Diaphragm MMDATN-8 Also available in 6 Ω, data upon request Also available DE85 (Polyester/Titanium Diaphragm) Driver mounted on B&C ME 90 horn. hour test made with continuous pink noise signal (6 db crest factor) within the range from the recommended crossover frequency to 0 k. Power calculated on rated minimum impedance. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 db/oct. or higher slope high-pass filter. bcspeakers.com 0

103 FE HF DE90TN FE HF ER 0 W 07.5 db 75 mm ( in) aluminium voice coil " horn throat diameter Titanium diaphragm Shorting copper cap for extended HF Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 6 mm (. in) 8. Ω 0 W 0 W 07.5 db commended crossover 5 Inductance Diaphragm Material k k 75 mm ( in) CCAW () 0. mh Titanium.8 T Ferrite Ring Four M6 holes 90 on 0 mm ( in) diameter 70 mm (6.7 in) 65 mm (.5 in) ( unit).5 kg (9.9 lb) ( units) 9.6 kg (. lb) ( units) 0x0x90 mm (8.7x8.7x7.8 in) placement Diaphragm MMDDTN-8M Also available in 6 Ω, data upon request Also available DE95TN (with 50 mm/.0 in exit) Driver mounted on B&C ME 90 horn. hour test made with continuous within the specified range. Power calculated on rated minimum impedance. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. Average SPL from 000 to db/oct. or higher slope high-pass filter. bcspeakers.com 0

104 FE HF DE85TN FE HF ER 0 W 07 db 75 mm ( in) aluminium voice coil " horn throat diameter Titanium diaphragm Shorting copper cap for extended HF Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 50 mm ( in) 8. Ω 0 W 0 W 07 db commended crossover 5 Inductance Diaphragm Material - 8 k k 75 mm (.0 in) CCAW () 0.05 mh Titanium.8 T Ferrite Two M6 holes 90 on 0 mm ( in) diameter 70 mm (6.7 in) 6 mm (.5 in) ( unit).5 kg (9.9 lb) ( units) 9.6 kg (. lb) ( units) 0x0x90 mm (8.7x8.7x7.8 in) placement Diaphragm MMDATN-8 Also available in 6 Ω, data upon request Also available DE85 (Polyester/Titanium Diaphragm) Driver mounted on B&C ME 75 horn. hour test made with continuous within the specified range. Power calculated on rated minimum impedance. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms and V for 6 ohms. Average SPL from 000 to db/oct. or higher slope high-pass filter. bcspeakers.com 0

105 FE HF DE750TN FE HF ER 0 W 07.5 db 75 mm ( in) aluminium voice coil " horn throat diameter Titanium diaphragm Shorting copper cap for extended HF Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 50 mm ( in) 7. 0 W 0 W 07.5 db commended crossover 5 Inductance Diaphragm Material k 0.8 k 75 mm ( in) CCAW () 0. mh Titanium.9 T Ferrite Ring Four M6 holes 90 on 0 mm ( in) diameter 80 mm (7. in) 87 mm (. in) 6. kg (.9 lb) 6.5 kg (. lb) 90x90x0 mm (7.8x7.8x.7 in) placement Diaphragm MMDATN-8 Also available in 6 Ω, data upon request Driver mounted on B&C ME75 horn. hour test made with continuous within the specified range. Power calculated on rated minimum impedance. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. Average SPL from 500 to db/oct. or higher slope high-pass filter. bcspeakers.com 05

106 B&C Speakers has been a leader in compression driver technology for decades, and is now a market leader in the development of neodymium compression drivers for the professional audio market. We are constantly advancing the science of high frequency driver development and adding new products to our range. The use of Neodymium magnets in our high frequency drivers has not only allowed us to dramatically reduce the size and weight, but also to improve performance and overall value. Our reliability and performance is second to none. We continue to work with a variety of materials to further improve performance. Through our modeling programs we are able to analyze every aspect of the driver, and study the impact of key components on each design. We use four different diaphragm materials: Mylar, pure Titanium, Polyimide and High Temperature (HT) Polyester. Each material has its own unique benefits and qualities. Mylar allows for an exceptionally smooth transient. Pure Titanium provides superb power handling and excellent reliability in the field. Polyimide achieves very high power handling and levels, and creates a smooth top end. HT Polyester provides superior power handling and higher output levels in the upper octave ranges. The updated range of bent voice-coil former high frequency drivers are particularly noteworthy. The DE680TN, DE880TN, DE980TN, DE990TN and DE090TN high frequency drivers feature a robust titanium diaphragm that incorporates next generation surround geometry, together with a brand new, optimized phase plug. Significant research has yielded a new coil former that solidifies the diaphragm with negligible increase in mass. The result is improved high frequency linearity and reduced distortion. They represent an excellent solution for two-way point source enclosures, as well as for mounting a waveguide horn in multi-driver line array systems. HF bcspeakers.com 06

107 HF DE5 TWEETER 50 W 08 db Neodymium magnet assembly Nominal (AES) Continuous Program Sensitivity (W/m) 7 Ω 5 W 50 W 08 db.5-8 k commended crossover 5 k mm (.5 in) CCAW () Inductance 0. mh Diaphragm Material Polyester. T Neodymium Inside Slug Three M holes 0 on 9 mm (.6 in) diameter 00 mm ( in) 6 mm (.8 in) ( unit) 0.7 kg (.5 lb) (8 units) 6. kg (. lb) (8 units) 5x5x65 mm (9.5x9.5x6.5 in) placement Diaphragm MMD05-8 within the range -0. Power calculated on rated minimum defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. db/oct. or higher slope high-pass filter. bcspeakers.com 07

108 HF DE7 HF ER 0 W 09 db 5 mm ( in) aluminium voice coil /" horn throat diameter Polyester diaphragm Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 9 mm (0.75 in) 6.6 Ω 0 W 0 W 09 db commended Crossover 5 Inductance Diaphragm material - 8 k.5 k 5 mm ( in) CCAW () 0. mh Polyester.65 T Neodymium Ring Two M holes 80 on 5 mm (. in) diameter 6 mm (. in) 5 mm (. in) 0.7 kg (0.7 lb) (8 units).5 kg (. lb) (8 units) 0x0x90 mm (5.x.x.5 in) placement Diaphragm MMDDE5-8 Also available in 6 Ω, data upon request Also available DE5 with 5 mm (0.5 in) exit Driver mounted on B&C ME7 horn. within the range -0. Power calculated on rated minimum defined as db greater than the Applied RMS Voltage is set to.8v for 8 ohms. Average SPL from 000 to db/oct. or higher slope high-pass filter. bcspeakers.com 08

109 HF DE0 HF ER 50 W 06 db 6 mm (. in) aluminium voice coil Ultra Compact 60 mm diameter HT Polymer diaphragm " horn throat diameter Throat diameter Nominal (AES) Continuous Program Sensitivity (W/m) 5 mm (.0 in) 5 W 50 W 06 db commended crossover 5 Inductance Diaphragm Material - 8 k k 6 mm (. in) CCAW () 0. mh HT Polymer.8 T Neodymium Ring Two M5 holes 80 on 5 mm (.05 in) diameter 60 mm (.6 in) 5 mm (.8 in) ( unit) 0. kg (0.7 lb) (8 units) kg (8.8 lb) (8 units) 5x5x65 mm (9.5x9.5x6.5 in) placement Diaphragm MMDDE08-8 Also available in 6 Ω, data upon request Driver mounted on B&C ME 5 horn. within the range -0. Power calculated on rated minimum defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 db/oct. or higher slope high-pass filter. bcspeakers.com 09

110 DE00TN HF ER 00 W 06 db mm (.7 in) aluminium voice coil Titanium diaphragm Compact Neodymium magnet assembly with shorting copper cap for extended HF " horn throat diameter HF Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 5 mm ( in) 7.7 Ω 50 W 00 W 06 db commended crossover 5 Inductance Diaphragm Material. - 8 k.5 k mm (.7 in) CCAW () 0. mh Titanium.8 T Neodymium Ring Two M6 holes 80 on 76 mm ( in) diameter 85 mm (.in) mm (.7 in) ( unit) 0.8 kg (.8 lb) (8 units) 6.7 kg (.7 lb) (8 units) 5x5x65 mm (9.5x9.5x6.5 in) placement Diaphragm MMD00TN-8 Also available in 6 Ω, data upon request Also available DE00 (Polyimide Diaphragm) Driver mounted on B&C ME5 horn. within the range -0. Power calculated on rated minimum defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. Average SPL from 000 to db/oct. or higher slope high-pass filter. bcspeakers.com 0

111 HF DE50 HF ER 00 W 07 db mm (.7 in) aluminium voice coil Titanium diaphragm Shorting copper cap for extended HF Optimized Neodymium magnet assembly " horn throat diameter Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 5 mm ( in) 7.6 Ω 50 W 00 W 07 db commended crossover 5 Inductance Diaphragm Material - 8 k.5 k mm (.7 in) CCAW () 0. mh Titanium.9 T Neodymium Ring Two M6 holes 80 on 76 mm ( in) diameter Three M6 holes 0 on 57 mm (. in) diameter 0 mm ( in) 5 mm ( in) ( unit). kg (. lb) (8 units).85 kg (6. lb) (8 units) 5x5x65 mm (9.5x9.5x6.5 in) placement Diaphragm MMD50-8 Also available in 6 Ω, data upon request Driver mounted on B&C ME 5 horn. within the range -0. Power calculated on rated minimum defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms and V for 6 ohms. Average SPL from 000 to db/oct. or higher slope high-pass filter. bcspeakers.com

112 DE550TN HF ER 0 W 08 db 5 mm ( in) aluminium voice coil HT Polymer diaphragm " horn throat diameter HF Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 5 mm ( in) 8. Ω 70 W 0 W 08 db commended crossover 5 Inductance Diaphragm Material - 7 k. k 5 mm (.0 in) CCAW () 0. mh Titanium.0 T Neodymium Ring Two M6 holes 80 on 76 mm ( in) diameter 9 mm (.6 in) 9 mm (.9 in) ( unit).5 kg (.76 lb) (8 units) 0.65 kg (.8 lb) (8 units) 0x0x50 mm (8.7x8.7x5.9 in) placement Diaphragm MMD550TN-8 Also available in 6 Ω, data upon request Also available DE550 (HT Polymer Diaphragm) Driver mounted on B&C ME5 horn. within the range -0. Power calculated on rated minimum defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 db/oct. or higher slope high-pass filter. bcspeakers.com

113 DE680TN HF ER 60 W 08 db 65 mm (.5 in) CCAW voice coil Neodymium magnet assembly with shorting copper cap Titanium diaphragm." horn throat diameter HF Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 6 mm (. in) 7.7 Ω 80 W 60 W 08 db commended crossover 5 Inductance Diaphragm Material - 8 k. k 65 mm (.5 in) CCAW () 0.5 mh Titanium.8 T Neodymium Ring Four M6 holes 90 on 0 mm ( in) diameter 5 mm (.5 in) 5 mm (.0 in) ( unit).75 kg (.85 lb) ( units) 7.5 kg (6. lb) ( units) 65x5x70 mm (0.x5.x6.69 in) placement Diaphragm MMD680TN-8 Also available in 6 Ω, data upon request Driver mounted on B&C ME 90 horn. within the range -0. Power calculated on rated minimum defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms and V for 6 ohms. Average SPL from 000 to db/oct. or higher slope high-pass filter. bcspeakers.com

114 DE880TN HF ER 0 W 08 db 75 mm ( in) aluminium voice coil Neodymium magnet assembly with shorting copper cap Titanium diaphragm." horn throat diameter HF Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 6 mm (. in) 8. Ω 0 W 0 W 08 db commended crossover 5 Inductance Diaphragm Material k. k 75 mm ( in) CCAW () 0. mh Titanium.85 T Neodymium Ring Four M6 holes 90 on 0 mm ( in) diameter mm (.9 in) 5. mm (. in) ( unit). kg (5. lb) ( units) 9.8 kg (.6 lb) ( units) 95x60x80 mm (.6x6.0x7.09 in) placement Diaphragm MMDDTN-8M Also available in 6 Ω, data upon request Driver mounted on B&C ME 90 horn. within the range -0. Power calculated on rated minimum defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms and V for 6 ohms. Average SPL from 000 to db/oct. or higher slope high-pass filter. bcspeakers.com

115 DE980TN HF ER 0 W 08.5 db 75 mm ( in) aluminium voice coil Neodymium magnet assembly with shorting copper cap Titanium diaphragm." horn throat diameter HF Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 6 mm (. in) 8. Ω 0 W 0 W 08.5 db commended crossover 5 Inductance Diaphragm Material k. k 75 mm (.0 in) CCAW () 0. mh Titanium.05 T Neodymium Ring Four M6 holes 90 on 0 mm ( in) diameter mm (.9 in) 5.5 mm (. in) ( unit). kg (5. lb) ( units) 9.8 kg (.6 lb) ( units) 95x60x80 mm (.6x6.0x7.09 in) placement Diaphragm MMDDTN-8M Also available in 6 Ω, data upon request Also available DE985TN (" exit) Driver mounted on B&C ME 90 horn. within the range -0. Power calculated on rated minimum defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms and V for 6 ohms. Average SPL from 000 to db/oct. or higher slope high-pass filter. bcspeakers.com 5

116 DE990TN HF ER 00 W 07.5 db 86 mm (. in) aluminium voice coil Neodymium magnet assembly with shorting copper cap." horn throat diameter HF Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 6 mm (. in) 7.6 Ω 00 W 00 W 07.5 db commended crossover 5 Inductance Diaphragm Material k.0 k 86 mm (. in) CCAW () 0. mh Titanium.9 T Neo Inside Ring Four M6 holes 90 on 0 mm ( in) diameter 8 mm (.65 in) 6 mm (.8 in) ( unit).85 kg (.08 lb) ( units) 8.0 kg (7.6 lb) ( units) 65x5x70 mm (0.x5.x6.69 in) placement Diaphragm MMD5ETN-8M Also available in 6 Ω, data upon request Driver mounted on B&C ME90 horn within the range -0. Power calculated on rated minimum defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms and V for 6 ohms. Average SPL from 000 to db/oct. or higher slope high-pass filter. bcspeakers.com 6

117 DE885TN HF ER 0 W 08.5 db 75 mm ( in) aluminium voice coil Neodymium magnet assembly with shorting copper cap Titanium diaphragm " horn throat diameter HF Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 50 mm (.0 in) 0 W 0 W 08.5 db commended crossover 5 Inductance Diaphragm Material k.0 k 75 mm ( in) CCAW () 0. mh Titanium.85 T Neodymium Ring Four M6 holes 90 on 0 mm ( in) diameter mm (.88 in) 89 mm (.5 in) ( unit).9 kg (5.9 lb) ( units) 0. kg (.9 lb) ( units) 0x65x0 mm (.0x6.5x9.05 in) placement Diaphragm MMDDTN-8M Also available in 6 Ω, data upon request Driver mounted on B&C ME60 horn. within the range -0. Power calculated on rated minimum defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 db/oct. or higher slope high-pass filter. bcspeakers.com 7

118 DE90TN HF ER 0 W 08.5 db 75 mm ( in) aluminium voice coil Neodymium magnet assembly with shorting copper cap Titanium diaphragm." horn throat diameter HF Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) mm (. in) 7. 0 W 0 W 08.5 db commended Crossover 5 Inductance Diaphragm material k. k 75 mm (.0 in) CCAW () 0. mh Titanium.05 T Neodymium Ring Two M holes 90 on 0 mm ( in) diameter mm (5. in) 5 mm (.05 in). kg (5.9 lb) ( units) 0. Kg (.9 lb) ( units) 95x60x80 mm (.6x6.0x7.09 in) placement Diaphragm MMDBTN-8M Also available in 6 Ω, data upon request Driver mounted on B&C ME90 horn. within the range -0. Power calculated on rated minimum defined as db greater than the Applied RMS Voltage is set to.8v for 8 ohms. 5 db/oct. or higher slope high-pass filter. bcspeakers.com 8

119 DE080TN HF ER 80 W 09 db 00 mm ( in) aluminium voice coil Neodymium magnet assembly with shorting copper cap Titanium diaphragm.5" horn throat diameter HF Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 8 mm (.5 in) 8. Ω 0 W 80 W 09 db commended crossover 5 Inductance Diaphragm Material k k 00 mm ( in) CCAW () 0.8 mh Titanium.95 T Neodymium Ring Four M6 holes 90 on 0 mm ( in) diameter 5 mm (6. in) 60 mm (. in). kg (7.5 lb).7 kg (8. lb) 90x90x00 mm (7.8x7.8x.9 in) placement Diaphragm MMDBTN-8M Also available in 6 Ω, data upon request Also available DE085TN (" exit) Driver mounted on B&C ME90 horn. within the range -0. Power calculated on rated minimum defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms and V for 6 ohms. Average SPL from 000 to db/oct. or higher slope high-pass filter. bcspeakers.com 9

120 DE090TN HF ER 0 W 08 db 00 mm ( in) aluminium voice coil Neodymium magnet assembly with shorting copper cap Titanium diaphragm." horn throat diameter HF Throat Diameter Nominal (AES) Continuous Program Sensitivity (W/m) 6 mm (. in) 8. Ω 0 W 0 W 08.0 db commended crossover 5 Inductance Diaphragm Material k 0.8 k 00 mm ( in) CCAW () 0.8 mh Titanium.9 T Neo Inside Ring Four M6 holes 90 on 0 mm ( in) diameter 7 mm (5.0 in) 5 mm (5.0 in) ( unit).9 kg (.9 lb) ( units) 8. kg (8.08 lb) ( units) 95x60x80 mm (.6x6.0x7.09 in) placement Diaphragm MMDCTN-8M Also available in 6 Ω, data upon request Driver mounted on B&C ME60 horn. within the range -0. Power calculated on rated minimum defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms. 5 db/oct. or higher slope high-pass filter. bcspeakers.com 0

121 LINE ARR A Y S O U RCES Over the last decades, there has been a dramatic shift towards line arrays in the professional arena. This has emphasized the importance of a superior high frequency horn and driver combinations. B&C s high frequency drivers have long been considered the industry standard, but line array systems require controlled coverage patterns. We have researched many aspects of line array waveguides, and are proud to offer our customers a complete series of high frequency solutions for line array systems. acoustic lenses create a well-behaved phasecoherent wavefront up to 5 k, and offer a very high Active Radiating Factor. Our engineering team has performed all of the critical tests to ensure that each aspect of line array performance has been carefully considered. The WGX and WG series are available as a complete assembly, combined with a wide variety of our and. exit high frequency drivers. The WGX and WG series are based on our state of the art neodymium compression drivers coupled to a proprietary waveguide. These specially designed bcspeakers.com

122 WG00 LINE ARRAY SOURCE 00 W 08.5 db mm (.7 in) aluminium voice coil Line Array optimized Waveguide with DE00 driver Polyimide diaphragm Compact Neodymium magnet assembly 0 max horizontal coverage LINE ARR A Y S O U RCES Horizontal Coverage 0 max Active Radiating Factor 9.5 % commended Crossover.5 k Waveguide Material Cast 7.7 Ω Nominal (AES) 50 W Continuous Program 00 W Sensitivity (W/m) 08.5 db k mm (.7 in) Inductance 0.8 mh Diaphragm Material Polyimide.8 T Neodymium Ring MOUNTING A SHIPPING INFORMATION Waveguide Baffle Cutout 0x5 mm (x in) Driver diameter 86 mm (. in) Dimensions x87x55 mm (.x.5x6. in). kg (.9 lb).5 kg (.0 lb) 0x95x80 mm (.7x.7x7. in) HORIZONTAL ANGLE frequency VERTICAL ANGLE frequency db/oct. or higher slope high-pass filter. Driver mounted on B&C ME 90 horn. within the range from the recommended crossover frequency to 0 k. impedance. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms and V for 6 ohms. Average SPL from 000 to Waveguide mounted on 90 x 0 bell horn. bcspeakers.com

123 WGX880TN LINE ARRAY SOURCE 0 W 08 db 75 mm ( in) aluminium voice coil Line Array optimized Waveguide with DE880TN driver Titanium diaphragm Neodymium magnet assembly with shorting copper cap 0 max horizontal coverage LINE ARR A Y S O U RCES Horizontal Coverage 0 max Active Radiating Factor 9.7 % commended Crossover 0.8 k Waveguide Material Cast 8. Ω Nominal (AES) 0 W Continuous Program 0 W Sensitivity (W/m) 08 db k 75 mm ( in) CCAW Diaphragm Material Titanium.85 T Neodymium Ring MOUNTING A SHIPPING INFORMATION Waveguide Baffle Cutout 5x5 mm (6x in) Driver diameter mm (.9 in) Dimensions 6x0x5 mm (6.x5.x9. in). kg (6.8 lb). kg (7.05 lb) 5x0x75 mm (9.6x5.5x6.9 in) HORIZONTAL ANGLE 5 0 VERTICAL ANGLE frequency db/oct. Or higher slope high-pass filter. within the range from the recommended crossover frequency to 0 k. impedance. defined as db greater then the frequency Applied RMS Voltage is set to.8 V for 8 ohms. 5 Waveguide mounted on 90 x 0 bell horn. bcspeakers.com

124 WGX090TN LINE ARRAY SOURCE 0 W 08 db 00 mm ( in) aluminium voice coil Line Array optimized Waveguide with DE090TN driver Titanium diaphragm Neodymium magnet assembly with shorting copper cap 0 max horizontal coverage LINE ARR A Y S O U RCES Horizontal Coverage 0 max Active Radiating Factor 9.7 % commended Crossover 0.8 k Waveguide Material Cast Nominal (AES) 0 W Continuous Program 0 W Sensitivity (W/m) 08 db k 00 mm (.0 in) CCAW Inductance 0.8 mh Diaphragm Material Titanium.9 T Neo Inside Ring MOUNTING A SHIPPING INFORMATION Waveguide Baffle Cutout 5x5 mm (6x in) Driver diameter 7 mm (5.0 in) Dimensions 6x0x mm (6.x5.x9. in).9 kg (6.9 lb) kg (6.6 lb) 5x0x75 mm (9.6x5.5x6.9 in) HORIZONTAL ANGLE frequency VERTICAL ANGLE frequency db/oct. or higher slope high-pass filter. Driver mounted on B&C ME 90 horn. within the range from the recommended crossover frequency to 0 k. impedance. defined as db greater than the Applied RMS Voltage is set to.8 V for 8 ohms and V for 6 ohms. Average SPL from 000 to Waveguide mounted on 90 x 0 bell horn. bcspeakers.com

125 HOR NS The range of B&C electro-acoustic systems is completed by a series of high frequency horns. The range includes constant directivity models that are known for their great consistency in angular coverage, and exponential models that optimize acoustical load and acoustic energy transfer. Standardized diameters give designers the freedom to choose the best driver/horn combination for each project. bcspeakers.com 5

126 ME0 HORN " throat entry Hyperbolic cosine flare 90 x 60 nominal coverage Excellent loading down to.5 k 6 horizontal angle 6 0 vertical angle Throat Diameter 5 mm ( in) Nominal Coverage Horizontal 90 Vertical 60 Cutoff Frequency.5 k Material ABS Dimensions 0.5x0.5x90 mm (5.x5.x.5 in) k k 0 k HOR NS MOUNTING A SHIPPING INFORMATION Four 6mm(0.5 in) holes 90 on 76 mm ( in) diameter Baffle Cutout Dimensions 0x0 mm (x. in) ( unit) 0.5 kg (0. lb) (0 units) 6 Kg (. lb) (0 units) 50x50x90 mm (.x.8x5. in) Horn mounted on B&C DE500 compression driver k k 6 k HORIZONTAL ANGLE frequency VERTICAL ANGLE frequency ME0 HORN " throat entry Excellent loading down to.5 k 90 x 60 nominal coverage Exponential flare 6 horizontal angle 6 0 vertical angle Throat Diameter 5 mm ( in) Nominal Coverage Horizontal 90 Vertical 60 Cutoff Frequency.5 k Material Cast Dimensions 5x5x90 mm (5.7x5.7x.6 in) k k 0 k MOUNTING A SHIPPING INFORMATION Two 6mm(0.5 in) holes 80 on 76 mm ( in) diameter Baffle Cutout Dimensions ( unit) 8x mm (.6x. in) 0.5 kg ( lb) (0 units).0 Kg (6. lb) (0 units) 50x50x90 mm (.x.8x5. in) Horn mounted on B&C DE500 compression driver k k 6 k HORIZONTAL ANGLE frequency VERTICAL ANGLE frequency bcspeakers.com 6

127 ME5 HORN " throat entry Exponential flare 90 x 0 nominal coverage Excellent loading down to k 6 0 horizontal angle 6 0 vertical angle Throat Diameter 5 mm ( in) Nominal Coverage Horizontal 90 Vertical 0 Cutoff Frequency k Material Cast Dimensions 0x.5x mm (.5x5.6x.9 in) k k 0 k HOR NS 8 k MOUNTING A SHIPPING INFORMATION k 6 k Two 6.5 mm (0.5 in) holes 80 on 76 mm ( in) diameter Baffle Cutout Dimensions 60x0 mm (0.x. in) ( unit) 0.8 kg (.8 lb) (0 units).9 Kg (0.8 lb) (0 units) 50x50x85 mm (.x.8x7. in) HORIZONTAL ANGLE frequency VERTICAL ANGLE frequency Horn mounted on B&C DE5 compression driver ME90 HORN." throat entry Constant directivity 80 x 60 nominal coverage Excellent loading down to horizontal angle 6 0 vertical angle Throat Diameter 6 mm (. in) Nominal Coverage Horizontal 80 Vertical 60 Cutoff Frequency 900 Material Cast 70x70.5x8 mm (0.6x0.6x5. in) k k k MOUNTING A SHIPPING INFORMATION k k 6 k Four 6.5 mm (0.5 in) holes 90 on 0 mm ( in) diameter Baffle Cutout Dimensions 5x5 mm (8.8x8.8 in) 0. kg (. lb).9 Kg (. lb) 90x90x70 mm (.x.x6.7 in) HORIZONTAL ANGLE frequency VERTICAL ANGLE frequency Horn mounted on B&C DE900 compression driver. bcspeakers.com 7

128 HOR NS ME60 HORN " throat entry 60 x 0 nominal coverage Constant directivity Excellent loading down to horizontal angle 6 0 vertical angle Throat Diameter 50 mm ( in) Nominal Coverage Horizontal 60 Vertical 0 Cutoff Frequency 800 Material Cast Dimensions 70x7x0 mm (0.6x9.x7.9 in) k MOUNTING A SHIPPING INFORMATION Four 6.5 mm (0.5 in) holes 90 on 0 mm ( in) diameter Baffle Cutout Dimensions x07 mm (9.x8. in).6 kg (.5 lb). Kg (.8 lb) 90x60x60 mm (.x0.x0. in) HORIZONTAL ANGLE 60 frequency 00 VERTICAL ANGLE 60 frequency k k 8 k k 0 6 k Horn mounted on B&C DE750 compression driver bcspeakers.com 8

B&C Speaker SpA Bagno a Ripoli (FI), Italia

B&C Speaker SpA Bagno a Ripoli (FI), Italia B&C Speaker SpA Bagno a Ripoli (FI), Italia +9 055 657 mail@bcspeakers.com B&C Speakers NA (USA & Canada) Pompton Plains, NJ + 97 8 0955 info.usa@bcspeakers.com B&C Speakers Brazil Porto Alegre, RS +55

More information

Find your local distributor at

Find your local distributor at H.Q. B&C SPEAKERS SpA via Poggiomoro, Località Vallina 00 Bagno a Ripoli (Firenze) Italia tel +9 0 67 fax +9 0 67 mail@bcspeakers.com USA & CANADA B&C SPEAKERS NA LCC 0 W. Parkway Unit Pompton Plains,

More information

CX15N351 COAXIAL DATASHEET

CX15N351 COAXIAL DATASHEET CX15N351 COAXIAL DESCRIPTION This CX15N351 is designed to provide an excellent frequency response linearity with very low distortion. This coaxial use a strongest unique neodymium magnetic structure that

More information

BETA-8A American Standard Series

BETA-8A American Standard Series Specification Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight Gap Height Voice Coil Diameter Thiele & Small Parameters

More information

BETA-8A American Standard Series

BETA-8A American Standard Series Specification Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight Gap Height Voice Coil Diameter Thiele & Small Parameters

More information

DELTA-15LF-4. American Standard series. SPL vs Freq. Specification. Materials of Construction

DELTA-15LF-4. American Standard series. SPL vs Freq. Specification. Materials of Construction American Standard series DELTA-15LF-4 Low frequency woofer for pro audio as a midbass or floor monitor in a sealed enclosure. Also suitable as a woofer in vented, bass guitar or PA enclosures. Midrange

More information

DEFINIMAX 4015LF Professional Series

DEFINIMAX 4015LF Professional Series Specification Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight Gap Height Voice Coil Diameter Thiele & Small Parameters

More information

DELTA PRO Professional series. SPL vs Freq. Specification. Materials of Construction

DELTA PRO Professional series. SPL vs Freq. Specification. Materials of Construction Professional series DELTA PRO 1-450-4 The Delta Pro 1-450 is a lighter weight version of the Delta Pro 1. Recommended as a woofer or midbass in vented enclosures. Also makes a perfect replacement in many

More information

LAB12 Professional Series

LAB12 Professional Series Specification Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight Gap Height Voice Coil Diameter Thiele & Small Parameters

More information

KAPPA-15A American Standard Series

KAPPA-15A American Standard Series Specification Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight Gap Height Voice Coil Diameter Thiele & Small Parameters

More information

BETA-10A American Standard Series

BETA-10A American Standard Series Specification Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight Gap Height Voice Coil Diameter Thiele & Small Parameters

More information

KILOMAX PRO 15A Professional Series

KILOMAX PRO 15A Professional Series Specification Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight Gap Height Voice Coil Diameter Thiele & Small Parameters

More information

Classic 1 Tweeter. Type Number: D2904/ Features:

Classic 1 Tweeter. Type Number: D2904/ Features: Classic 1 Tweeter Type Number: D2904/600000 Features: The Classic line consists of all the highly regarded transducers that have been apraised and loved by so many customers over the years. The goal has

More information

PROFESSIONAL TRANSDUCERS THE HEART OF YOUR SOUND

PROFESSIONAL TRANSDUCERS THE HEART OF YOUR SOUND PROFESSIONAL TRANSDUCERS THE HEART OF YOUR SOUND PROFESSIONAL TRANSDUCERS FROM STADIUMS TO SMALL AUDIENCES THE HEART OF YOUR SOUND Design: dcatt engineers have developed REDCATT branded transducers utilizing

More information

The CVEN speakers were designed by the Vibe Research and Development team of UK and European engineers headed by company founder Carl Venables.

The CVEN speakers were designed by the Vibe Research and Development team of UK and European engineers headed by company founder Carl Venables. The CVEN speakers were designed by the Vibe Research and Development team of UK and European engineers headed by company founder Carl Venables. The design brief was to create both a two way and a three

More information

DELTA PRO-8B Professional Series

DELTA PRO-8B Professional Series Specification Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight Gap Height Voice Coil Diameter Thiele & Small Parameters

More information

APPLICATION NOTE PROFESSIONAL LOUDSPEAKERS SINGLE 21, BAND-PASS SUBWOOFER KIT

APPLICATION NOTE PROFESSIONAL LOUDSPEAKERS SINGLE 21, BAND-PASS SUBWOOFER KIT APPLICATION NOTE PROFESSIONAL LOUDSPEAKERS SINGLE 21, BAND-PASS SUBWOOFER KIT KEY FEATURES > High performance 21 subwoofer system. > Double Reflex Band-Pass design for high output, extended low frequency

More information

DELTA-12LFA American Standard Series

DELTA-12LFA American Standard Series Specification Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight Gap Height Voice Coil Diameter Thiele & Small Parameters

More information

C7: Speaker Components

C7: Speaker Components Reference this. 2 C7: Speaker Components The C7 project was directed by JL Audio s Chief Engineer and CEO, Lucio Proni, with a clear mission to create our finest-ever automotive component speakers. Challenging

More information

C5A Series. 8" Dual Cone Loudspeaker Available With Transformer. Specifications. Features. Thiele-Small Parameters. Applications. General Description

C5A Series. 8 Dual Cone Loudspeaker Available With Transformer. Specifications. Features. Thiele-Small Parameters. Applications. General Description C5A Series 8" Dual Cone Loudspeaker Available With Transformer Features Industry Standard Value Loudspeaker with Proven Performance Available with Factory-Installed Line-Matching Transformer Ideal for

More information

Sheffield Pro Series. Sheffield Pro Sheffield Pro

Sheffield Pro Series. Sheffield Pro Sheffield Pro P E A V E Y E L E C T R O N I C S Sheffield Pro Series Sheffield Pro 1200+ 00577900 Sheffield Pro 1500+ 00577910 The Pro 1200+ and Pro 1500+ drivers are high quality, high efficieny woofers. They are an

More information

DELTALITE -II 2515 Neodymium

DELTALITE -II 2515 Neodymium Specification Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight Gap Height Voice Coil Diameter Thiele & Small Parameters

More information

BETA-12LTA American Standard Series

BETA-12LTA American Standard Series Specification Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight Gap Height Voice Coil Diameter Thiele & Small Parameters

More information

DELTA-15LFA American Standard Series

DELTA-15LFA American Standard Series Specification Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight Gap Height Voice Coil Diameter Thiele & Small Parameters

More information

DELTALITE -II 2512 Neodymium

DELTALITE -II 2512 Neodymium Specification Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight Gap Height Voice Coil Diameter Thiele & Small Parameters

More information

BETA-12A-2 American Standard Series

BETA-12A-2 American Standard Series Specification Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight Gap Height Voice Coil Diameter Thiele & Small Parameters

More information

A Guide to Reading Transducer Specification Sheets

A Guide to Reading Transducer Specification Sheets A Guide to Reading Transducer Specification Sheets There are many numbers and figures appearing on a transducer specification sheet. This document serves as a guide to understanding the key parameters,

More information

American Standard Series

American Standard Series Specification Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range*** Sensitivity Magnet Weight Gap Height Voice Coil Diameter, 254mm 8 ohms 250W

More information

C803A Series. 8 " Coaxial Loudspeaker Available With Transformer. Specifications. Features. Thiele-Small Parameters. Applications. General Description

C803A Series. 8  Coaxial Loudspeaker Available With Transformer. Specifications. Features. Thiele-Small Parameters. Applications. General Description C803A Series 8 " Coaxial Loudspeaker Available With Transformer Features Industry Standard 8" (203mm) Coaxial, 16 Watt, Loudspeaker Offers Proven Performance with Wide Frequency Response Post-Mounted Tweeter

More information

1808 BWX Driver Series

1808 BWX Driver Series P E A V E Y E L E C T R O N I C S 1808 BWX Driver Series 1808-8sps BWX 00560580 1808-4sps BWX 00560640 1808-8cu BWX 00560660 1808-8he BWX 00560620 The 1808 BWX driver series represents a new level of power

More information

Fs Hz Qts Vas Ltrs. Xmax mm P. db 2.83V/m.

Fs Hz Qts Vas Ltrs. Xmax mm P. db 2.83V/m. Model Imp Ω Fs Hz Qts Ltrs @12dB db 2.83V/m TWEETERS R2904/7000: Premium Ring Radiator 4 520 94.5 0.2 D2008/8512: ¾ dome, cham ber, ff 8 800 150@4k 90 0.7 D2010/8513: ¾ dome, cham ber, foam on face plate,

More information

ECW100 / ECW120 ENCORE SERIES SUBWOOFERS

ECW100 / ECW120 ENCORE SERIES SUBWOOFERS / ENCORE SERIES SUBWOOFERS CONTENT INTRODUCTION FEATURES PHYSICAL DIMENSIONS THIELE / SMALL PARAMETERS ENCLOSURES DETAILS SINGLE SPEAKER WIRING DUAL SPEAKER WIRING TROUBLESHOOTING WARRANTY 2 2 3 4 5 8

More information

Features: Description

Features: Description Features: Peavey Exclusive Lo Max 18" Subwoofer Extended frequency response down to 33 Hz (half-space) 2400 watts of program power rating Full power low frequency response down to 38 Hz! Neutrik Speakon

More information

Low frequency section: 500 Watts continuous 1,000 Watts program 2,000 Watts peak

Low frequency section: 500 Watts continuous 1,000 Watts program 2,000 Watts peak SPECIFICATIONS QW 3 Frequency response, 1 meter on-axis, swept-sine in an anechoic environment: 50 Hz 16 khz (±3 db) Usable low frequency limit (-10 db point): 33 Hz Power handling: Full range: 1,000 Watts

More information

Black Widow BWX. gaskets and high reliability, spring loaded terminals are all used.

Black Widow BWX. gaskets and high reliability, spring loaded terminals are all used. P E A V E Y E L E C T R O N I C S Black Widow BWX 1208-8sps BWX - 00560760 1208-4sps BWX - 00560740 1508-8sps BWX - 00560180 1508-4sps BWX - 00560140 1508-8cu BWX - 00560160 1508-8he BWX - 00560000 The

More information

Mobile Fidelity_Specifications

Mobile Fidelity_Specifications Mobile Fidelity_Specifications Mobile Fidelity_Specifications welcome Worldwide, golden-eared critics have established the fact that Dynaudio is arguably the most innovative and technologically advanced

More information

pro audio hf devices components guitar bass

pro audio hf devices components guitar bass 2 011 pro audio hf devices components guitar bass There s no doubt the guitar speaker is one of the most important pieces of the tone puzzle. With no practical way to demo them in a retail environment,

More information

FINEBox. Non-Linear High Power Box Design Program For Hi-Fi, PA and Micro loudspeakers T U T O R I A L

FINEBox. Non-Linear High Power Box Design Program For Hi-Fi, PA and Micro loudspeakers T U T O R I A L FINEBox Non-Linear High Power Box Design Program For Hi-Fi, PA and Micro loudspeakers T U T O R I A L 1 FINEBox is the ideal Box Design Program for all Loudspeakers including Micro and PA drivers. Simulation

More information

BLACK WIDOW SUPER STRUCTURE

BLACK WIDOW SUPER STRUCTURE P E A V E Y E L E C T R O N I C S BLACK WIDOW SUPER STRUCTURE HIGH EFFICIENCY HIGH RELIABILITY HIGH OUTPUT The Black Widow /Super Structure still remains far ahead of any of its competitors due to its

More information

Directional Performance

Directional Performance EVX-180B 18-Inch Low-Frequency Reproducer Exceptionally resistant to longterm failure in real-world low-bass applications Utilizes findings about failure modes not revealed in normal high-power testing

More information

SPECIFICATIONS QW -1. Listen To This. Mid Frequency Section: 101 db SPL, (2 Volt input) High Frequency Section: 111 db SPL, (2.

SPECIFICATIONS QW -1. Listen To This. Mid Frequency Section: 101 db SPL, (2 Volt input) High Frequency Section: 111 db SPL, (2. SPECIFICATIONS QW -1 Frequency response, 1 meter on-axis, swept-sine in an anechoic environment: 200 Hz to 18 khz (±3 db) Usable low frequency limit (-10 db point): 150 Hz Power handling: Full Range: 600

More information

d anish sound technology

d anish sound technology automotive series 2005/06 speakers handcrafted in denmark d anish sound technology enter a world of speakers... www.d-s-t.com.au PEERLESS SUBWOOFER - RESOLUTION SERIES RESOLUTION SERIES extra high power

More information

CONE TRANSDUCERS & COMPRESSION DRIVERS HIGH QUALITY COMPONENTS FROM JBL

CONE TRANSDUCERS & COMPRESSION DRIVERS HIGH QUALITY COMPONENTS FROM JBL 2226H/J 2241H 2206H CONE TRANSDUCERS & COMPRESSION DRIVERS HIGH QUALITY FROM JBL Manufacturing our own component transducers has historically set JBL apart from most other loudspeaker system manufacturers,

More information

20 16 Product Catalog

20 16 Product Catalog 2016 Product Catalog Speaking about PRV Audio s history could be easy. It could be as easy as feeling an emotion, a good sensation, the same you get when you feel something good is about to happen. ABOUT

More information

danish sound technology

danish sound technology automotive series 2005/06 speakers handcrafted in denmark danish sound technology enter a world of speakers... www.d-s-t.com.au PEERLESS SUBWOOFER - RESOLUTION SERIES RESOLUTION SERIES extra high power

More information

FBT RECANATI

FBT RECANATI Operating Manual FBT elettronica SpA Via Paolo Soprani 1 - Zona Ind.le Squartabue - 62019 RECANATI - ITALYTel. 071 750591 - Fax. 071 7505920 - email: info@fbt.it - www.fbt.it THE SERIES WARNINGS DESCRIPTION

More information

FINEBox T U T O R I A L

FINEBox T U T O R I A L FINEBox Non-Linear High Power Box Design Program For Hi-Fi, PA and Micro loudspeakers T U T O R I A L www.loudsoft.com 1 Contents 1. Micro Loudspeaker / Receiver Box Design... 4 2. 15 inch PRO-Sound Woofer...

More information

Subwoofers UNDSTREAM. i. - I. \ INSTALLATION GUIDE. T E C H Iv 0 L,O G I E S

Subwoofers UNDSTREAM. i. - I. \ INSTALLATION GUIDE. T E C H Iv 0 L,O G I E S Subwoofers UNDSTREAM T E C H N 0 L 0 G i E S SOUNDSTREAM TECHNOLOGIES 120 Blue Ravine Road Folsom California 95630 USA tel 916.351.I 288 fax 916.351.0414 (REV A, 7/22/97) ) OWNER S I t. 1 i. - I. \ b MANUAL

More information

Distortion and Power Compression in Low-frequency Transducers

Distortion and Power Compression in Low-frequency Transducers Technical Notes Volume 1, Number 9 Distortion and Power Compression in Low-frequency Transducers 1 Introduction: All too often, consultants and sound contractors are concerned with only the Input power

More information

Quadra 10 Available in Black and White

Quadra 10 Available in Black and White S P E C I F I C A T I O N S Quadra 10 Available in Black and White Frequency response, 1 meter on-axis, swept-sine in anechoic environment: 74 Hz 18 khz (±3 db) Usable low frequency limit (-10 db point):

More information

SPECIFICATIONS QW -215

SPECIFICATIONS QW -215 Box tuning frequency: 40 Hz Harmonic distortion: 1% rated power Second Harmonic: Hz:.58% 500 Hz:.33% Third Harmonic: Hz:.19% 500 Hz:.33% 10% rated power Second Harmonic: Hz: 1.90% 500 Hz: 1.30% Third Harmonic:

More information

8" COAXIAL LOUDSPEAKER AVAILABLE WITH TRANSFORMER FEATURES MODEL COMBINATIONS / TRANSFORMER SPECIFICATIONS

8 COAXIAL LOUDSPEAKER AVAILABLE WITH TRANSFORMER FEATURES MODEL COMBINATIONS / TRANSFORMER SPECIFICATIONS 8" COAXIAL LOUDSPEAKER AVAILABLE WITH TRANSFORMER C803A FEATURES Industry Standard 8" (203mm) Coaxial, 16-Watt, Loudspeaker Offers Proven Performance with Wide Frequency Response Post-Mounted Tweeter Adds

More information

EDGE ACTIVE SELF-POWERED SPEAKER SYSTEMS

EDGE ACTIVE SELF-POWERED SPEAKER SYSTEMS EDGE ACTIVE SELFPOWERED SPEAKER SYSTEMS In their market segment, the Edge Series active models represent the highest expression of Proel Sound Reinforcement. Audio quality and surprising sound pressure

More information

Normalized Amplitude Response (db-spl/hz) Custom Amplitude Response (db-spl/hz at 1 m) with 300 watts. Maximum Acoustic Power (db-spl/hz at 1 m)

Normalized Amplitude Response (db-spl/hz) Custom Amplitude Response (db-spl/hz at 1 m) with 300 watts. Maximum Acoustic Power (db-spl/hz at 1 m) **The LAB was specifically designed for use in a horn loaded enclosure engineered by participants of the Live Audio Board at http://www.prosoundweb.com/lsp/. There are five points (listed on the last page)

More information

NSW EMINENCE PRODUCTS. eminence.com

NSW EMINENCE PRODUCTS. eminence.com NSW6021-6 EMINENCE PRODUCTS eminence.com TOUR GRADE PRODUCTS INTRODUCING THE NEW STANDARD FOR UNBELIEVABLE POWER Eminence was founded during the Professional Audio is experiencing staggering The Eminence

More information

FANE EN x 18 SUB BASS ENCLOSURE

FANE EN x 18 SUB BASS ENCLOSURE 1284,00 225,00 350,00 300,00 600,00 1284,00 624,00 624,0 FANE EN21802 2x 18 SUB BASS ENCLOSURE FANE COMPONENT OPTIONS COLOSSUS 18XB 18 Sub Bass Driver COLOSSUS 18SB 18 Sub Bass Driver SOVEREIGN PRO 18-800P

More information

THE ART EVOLUTION CONTINUES

THE ART EVOLUTION CONTINUES ART 500 SERIES ART 500 SERIES THE ART EVOLUTION CONTINUES In 1998, the ART 500 Series was launched to provide systems for larger venues in both MI and Multimedia situations. This transition represented

More information

UBL SOUND POWER M SERIES

UBL SOUND POWER M SERIES UBL SOUND POWER M SERIES As the expertise expected of the working musician becomes more complex, and the performance standards demanded by audiences become ever more sophisticated, JBL is continuously

More information

A History made by emotions

A History made by emotions ABOUT US A History made by emotions To speak about PRV Audio we need to go back to 2006, when the passion and determination of a group of former executives and engineers from Brazil s most prestigious

More information

the px story using the 310px

the px story using the 310px the px story Your 310px component subwoofer is the finest subwoofer ever from a/d/s/. Like other models in the px system, the 310px sets a new standard of musical performance and precise construction.

More information

407 SERIES 6.5-Inch Duplex Full- Range High Performance Ceiling Loudspeakers 407-8A, 8 ohm,16 watts (EIA RS-426-A)

407 SERIES 6.5-Inch Duplex Full- Range High Performance Ceiling Loudspeakers 407-8A, 8 ohm,16 watts (EIA RS-426-A) 407 SERIES 6.5-Inch Duplex Full- Range High Performance Ceiling Loudspeakers 407-8A, 8 ohm,16 watts (EIA RS-426-A) 407-8T, with 8 watt multi-tap transformer 407-16T,with 16 watt multitap transformer High

More information

Description. 175 watts Test Voltages: 34.2 volts rms 68.3 volts peak R SR (1.15 R E. ): 6.67 ohms. Suspending the Xi-1082

Description. 175 watts Test Voltages: 34.2 volts rms 68.3 volts peak R SR (1.15 R E. ): 6.67 ohms. Suspending the Xi-1082 Xi-1082 X-Array Install Two-Way, Full-Range, Sound-Reinforcement System 8-inch two-way 90 x 40 horn coverage 175-watts long term power capacity Ring-Mode Decoupling (RMD ) Full-range with internal passive

More information

The new rainbow PROFI line. Completely different. Experience music in a new way. Visually, acoustically, dynamically.

The new rainbow PROFI line. Completely different. Experience music in a new way. Visually, acoustically, dynamically. The new rainbow PROFI line. Completely different. Experience music in a new way. Visually, acoustically, dynamically. Made in Germany PL-T28 SET TWEETER Stainless steel housing for very low distortion,

More information

MR8 MR8 SPEAKER. Monitor Series. Compact Full-Range Speaker

MR8 MR8 SPEAKER. Monitor Series. Compact Full-Range Speaker Monitor Series The is the result of extensive research in the development of new transducers and crossover design. The result is a product with exceptional fidel-ity, the ability to produce deep controlled

More information

20 VOICE COIL. Figure 7: BlieSMA T34A-4 SoundCheck CSD waterfall plot

20 VOICE COIL. Figure 7: BlieSMA T34A-4 SoundCheck CSD waterfall plot and off-axis response of the T34A-4 high-frequency device. Figure 4 shows the off-axis curves normalized to the on-axis response. Figure 5 shows the CLIO 1 polar plot (measured in 10 increments). The two-sample

More information

AX12C 12 x 3.5 (88mm), High Power, Passive, Portable Line Array Element

AX12C 12 x 3.5 (88mm), High Power, Passive, Portable Line Array Element KEY FEATURES High Power passive portable Line Array element 12 x 3.5 neodymium transducers with waterproof cones 360W continuous power 720W program power Line Array dispersion characteristics Acoustic

More information

10 Years of History made by emotions

10 Years of History made by emotions Speaking about PRV Audio s history could be easy. It could be as easy as feeling an emotion, a good sensation, the same you get when you feel something good is about to happen. ABOUT US 10 Years of History

More information

File: DeltaPro12SmallMidHighBox400Watts.bb6

File: DeltaPro12SmallMidHighBox400Watts.bb6 DeltaPro Small Mid/Hi Sat Box or Hi Pwr Floor Wedge By McJerry, Eminence Speaker LLC Displacement and thermally limited to watts. Must use a per octave high pass filter set to 1 Hz or higher to protect

More information

Tolerances of the Resonance Frequency f s AN 42

Tolerances of the Resonance Frequency f s AN 42 Tolerances of the Resonance Frequency f s AN 42 Application Note to the KLIPPEL R&D SYSTEM The fundamental resonance frequency f s is one of the most important lumped parameter of a drive unit. However,

More information

The Naim Balanced Mode Radiator The Naim Ovator Bass Driver

The Naim Balanced Mode Radiator The Naim Ovator Bass Driver 1 The Naim Balanced Mode Radiator The Naim Ovator Bass Driver Lampos Ferekidis & Karl-Heinz Fink Fink Audio Consulting on behalf of Naim Audio Southampton Road, Salisbury SP1 2LN, ENGLAND The Balanced

More information

SPECS. Impulse (4 and 8 ohm) Two-Way Weather-Resistant Injection-Molded Speaker System SPECIFICATIONS. Built under U.S.

SPECS. Impulse (4 and 8 ohm) Two-Way Weather-Resistant Injection-Molded Speaker System SPECIFICATIONS. Built under U.S. SPECS P E A V E Y E L E C T R O N I C S Impulse 1012 (4 and 8 ohm) Two-Way Weather-Resistant Injection-Molded Speaker System Built under U.S. Patent 6,064,745 SPECIFICATIONS Enclosure: Peavey Impulse 1012

More information

Panaray MB4 TECHNICAL DATA SHEET. modular bass loudspeaker. Key Features. Product Overview. Technical Specifications

Panaray MB4 TECHNICAL DATA SHEET. modular bass loudspeaker. Key Features. Product Overview. Technical Specifications Key Features Unique 4 x 5.25" (133 mm) high-excursion woofer configuration provides deep bass to 35 Hz with fast transient response Modular design allows stacking of multiple enclosures for increased maximum

More information

The Woofer Tester 2. Precision Thiele-Small & RLC Measurement Simulation and Box Analysis. Web: Phone:

The Woofer Tester 2. Precision Thiele-Small & RLC Measurement Simulation and Box Analysis. Web:  Phone: Precision Thiele-Small & RLC Measurement Simulation and Box Analysis 1 Features Precision Thiele Small Measurement System using Constant Current Source Advanced Thiele Small Simulator with Frequency Dependent

More information

Quadra 15 Available in Black and White

Quadra 15 Available in Black and White S P E C I F I C A T I O N S Quadra 15 Available in Black and White Frequency response, 1 meter onaxis, swept-sine in anechoic environment: 64 Hz to 18 khz (±3 db) Usable low frequency limit (-10 db point):

More information

POWERCLASS TM C2 OWNERS MANUAL. CONTENTS (click a topic to view)

POWERCLASS TM C2 OWNERS MANUAL. CONTENTS (click a topic to view) POWERCLASS TM C2 OWNERS MANUAL CONTENTS (click a topic to view) CONGRATULATIONS PC12 C2 RESPONSE CURVES INTRODUCTION PC15 C2 DIMENSIONS PC8 C2 SPECIFICATIONS PC15 C2 RESPONSE CURVES PC10 C2 SPECIFICATIONS

More information

not overpower the audience just below and in front of the array.

not overpower the audience just below and in front of the array. SPECIFICATIONS SSE LA Description Designed for use in permanent professional installations in churches, theaters, auditoriums, gyms and theme parks, the SSE LA is a dual-radius dius curved line array that

More information

250W 500W 1000W 2000W 4000W

250W 500W 1000W 2000W 4000W An Introduction Thank you for purchasing a JL Audio W7 subwoofer driver.the W7 embodies JL Audio s commitment to pushing the envelope of speaker technology, with eight patented technologies, a design patent

More information

RD75, RD50, RD40, RD28.1 Planar magnetic transducers with true line source characteristics

RD75, RD50, RD40, RD28.1 Planar magnetic transducers with true line source characteristics RD75, RD50, RD40, RD28.1 Planar magnetic transducers true line source characteristics The RD line of planar-magnetic ribbon drivers represents the ultimate thin film diaphragm technology. The RD drivers

More information

SA1232 SA1232 SPEAKER SA O F 6 P A G E S. Active 3-Way Sound Reinforcement Speaker System

SA1232 SA1232 SPEAKER SA O F 6 P A G E S. Active 3-Way Sound Reinforcement Speaker System The is a high-efficiency, extreme-output, active 3-way, wide dispersion, sound reinforcement speaker system. The benefits from the integration of 13 watts of amplifier power, complete active control electronics,

More information

File: Delta10ALargeVentedBox125Watts.bb6

File: Delta10ALargeVentedBox125Watts.bb6 Delta1A Lgr Vented Cab.; Bass Guitar or Low Pwr Two-Way By McJerry, Eminence Speaker LLC Displacement Limited to 5 Watts; F3 of 3 Hz. Great for Bass guitar. Use a steep high pass filter set to 5 Hz or

More information

Speaker Systems. Designed, engineered. and manufactured in Italy

Speaker Systems. Designed, engineered. and manufactured in Italy Speaker Systems Designed, engineered and manufactured in Italy EvoMaxX 3 > > More powerful Class D amplifiers > > Extra lighweight polypropylene cabinets > > Higher SPL for optimal audio reproduction >

More information

SSE 12 SPECIFICATIONS

SSE 12 SPECIFICATIONS SPECIFICATIONS SSE 12 Description The SSE is a new enclosure series featuring high power ratings with custom components, a sleek look and a unique, snap-in metal grille. The SSE 12 is a twoway system featuring

More information

Sound engineering course

Sound engineering course Sound engineering course 1.Acustics 2.Transducers Fundamentals of acoustics: nature of sound, physical quantities, propagation, point and line sources. Psychoacoustics: sound levels in db, sound perception,

More information

File: DeltaPro15LargeVentedBox200Watts.bb6

File: DeltaPro15LargeVentedBox200Watts.bb6 DeltaPro15 Large Vented Box, Med Power, Med F3. Ok Full Range By McJerry, Eminence Speaker LLC Displacement limited to watts. Must use a per octave high pass filter set to 5 Hz or higher to protect driver

More information

The Woofer Tester Pro. Integrated Speaker Measurement & Design. Web: Phone:

The Woofer Tester Pro. Integrated Speaker Measurement & Design. Web:  Phone: Integrated Speaker Measurement & Design 1 Features Precision Thiele-Small Measurement System (Microwatt to 200W test range) Measures Voice Coil and Suspension AC and DC Compression Effects 100pF-1000uF,

More information

Artcoustic SL. Owners Manual. Three-Way Optional Stereo or Mono Multi Room Speaker. www. artcoustic.com. Loudspeakers

Artcoustic SL. Owners Manual. Three-Way Optional Stereo or Mono Multi Room Speaker. www. artcoustic.com. Loudspeakers Owners Manual 4030 SL ThreeWay Optional Stereo or Mono Multi Room Speaker www. artcoustic.com 4030 SL Full Range Multi Room Speaker 4030 SL ThreeWay Optional Stereo or Mono Multi Room Speaker Features:

More information

MB12 / MB12 WR TECHNICAL DATA SHEET. modular bass loudspeaker. Key Features. Product Overview. Technical Specifications

MB12 / MB12 WR TECHNICAL DATA SHEET. modular bass loudspeaker. Key Features. Product Overview. Technical Specifications Key Features Low-frequency reinforcement for Bose LT arrays and other subwoofer applications that require 4-28 Hz bass response Front-loaded tapered transmission line design provides peakfree extended

More information

XLS Subwoofer Application note for Peerless XLS 10" subwoofer drive units

XLS Subwoofer Application note for Peerless XLS 10 subwoofer drive units XLS Subwoofer Application note for Peerless XLS 10" subwoofer drive units Introduction: The following is an application note of how to use the Peerless XLS family of subwoofer drive units. The application

More information

Architect s and Engineer s Specifications. 409 SERIES DUPLEX LOUDSPEAKERS The loudspeaker shall be a Duplex type

Architect s and Engineer s Specifications. 409 SERIES DUPLEX LOUDSPEAKERS The loudspeaker shall be a Duplex type Description The Altec Lansing 409 series Duplex loudspeaker systems are twoway loudspeakers with 8inch lowfrequency cones and hightemperature voicecoil assemblies coaxially mounted with widedispersion

More information

The NEO8 and NEO8 PDR high performance wideband, planar-magnetic transducers

The NEO8 and NEO8 PDR high performance wideband, planar-magnetic transducers The NEO8 and NEO8 PDR high performance wideband, planar-magnetic transducers The NEO8 and Neo8 PDR are planar-magnetic (ribbon) transducers that use an innovative hightech diaphragm material called Kaladex

More information

DH1A DH1A-16 High-Frequency Reproducers

DH1A DH1A-16 High-Frequency Reproducers DH1A DH1A-16 High-Frequency Reproducers Description The Electro-Voice DH1A is a world-class, high-frequency compression driver capable of unprecedentedly high acoustic power output over an extremely wide

More information

PRO SubWoofers PRO 104 PRO 124

PRO SubWoofers PRO 104 PRO 124 PRO SubWoofers PRO 104 PRO 124 TABLE OF CONTENTS Congratulations....................................... 3 Caution............................................. 3 Specifications........................................

More information

THE UNDER HUNG VOICE COIL MOTOR ASSEMBLY REVISITED IN THE LARGE SIGNAL DOMAIN BY STEVE MOWRY

THE UNDER HUNG VOICE COIL MOTOR ASSEMBLY REVISITED IN THE LARGE SIGNAL DOMAIN BY STEVE MOWRY THE UNDER HUNG VOICE COIL MOTOR ASSEMBLY REVISITED IN THE LARGE SIGNAL DOMAIN BY STEVE MOWRY The under hung voice coil can be defined as a voice coil being shorter in wind height than the magnetic gap

More information

W8LC Compact Line Array

W8LC Compact Line Array features High power - maximum SPL 129dB continuous, 135dB peak (single unit) Superior bass impact - all horn design Wide bandwidth - 60Hz-18KHz ± 3dB (single unit) True 90 (-6dB) horizontal mid and HF

More information

Test Bench: Wavecor TW030WA13/14 Neodymium Tweeters

Test Bench: Wavecor TW030WA13/14 Neodymium Tweeters Test Bench: Wavecor TW030WA13/14 Neodymium Tweeters April 02, 2016by Vance Dickason The transducer, actually transducers, I examined in This Test Bench were the new Wavecor TW030WA13/14 (see Photo 1).

More information

Owners Manual. Single Coupled Multi Purpose Professional Subwoofer. www. artcoustic.com

Owners Manual. Single Coupled Multi Purpose Professional Subwoofer. www. artcoustic.com Owners Manual Single Coupled Multi Purpose Professional Subwoofer www. artcoustic.com 120-43 SL Subwoofer Single Coupled Professional Subwoofer Single Coupled Multi Purpose Professional Subwoofer Features:

More information

Ref63aa. 3 way speaker system. / product id: Ref63aa18. model: Ref63aa

Ref63aa. 3 way speaker system.   /   product id: Ref63aa18. model: Ref63aa Audiophile Acoustics sweet like danish Ref63aa 3 way speaker system model: Ref63aa product id: Ref63aa18 www.b2audio.com / www.facebook.com/b2audio Introduction Ref63AA is the 2nd iteration of our 3 way

More information

ViRAY. with DDP Dual Diaphragm Planar-wave-driver Technology. Compact 3-way symmetrical line array system. DDP Technology

ViRAY. with DDP Dual Diaphragm Planar-wave-driver Technology. Compact 3-way symmetrical line array system. DDP Technology 1 1 with DDP Dual Diaphragm Planar-wave-driver Technology Whether it s for live touring applications or high-end fixed installations, has been created to surpass and excite the needs of both user and listener

More information

FA22. Dual 12 inch Coaxial Loudspeaker. product specification. Performance Specifications 1

FA22. Dual 12 inch Coaxial Loudspeaker. product specification. Performance Specifications 1 FA22 Dual 12 inch Coaxial Loudspeaker Performance Specifications 1 Operating Mode Bi-amplified w/ DSP Operating Range 2 44 Hz to 20 khz Nominal Beamwidth (rotatable) 90 x 45 Transducers LF: 12.0 neodymium

More information

Quadra 12 Available in Black and White

Quadra 12 Available in Black and White S P E C I F I C A T I O N S Quadra 12 Available in Black and White Frequency response, 1 meter onaxis, swept-sine in anechoic environment: 76 Hz to 18 khz (±3 db) Usable low frequency limit (-10 db point):

More information