CV SERIES. 1.8 to 45 Watts VDC, VDC, 10-30VDC Input Ranges Adjustable Output Voltage Non-Isolated DC/DC Converters
|
|
- Kelly Patterson
- 5 years ago
- Views:
Transcription
1 DATASHEET CV SERIES 2.-.VDC, 4.-4VDC, 0-30VDC Input Ranges FEATURES Output Current up to 3A Output Power Range 2.-.VDC, 4.-4VDC, and 0-30VDC Input Voltage Ranges High Efficiency - 9% at 2VDC and Full Load SIP Open Frame Packages Small Size and Profile Fixed Switching Frequency Remote ON/OFF Short Circuit, Over Current, and Over Temperature Protection Compliant to RoHS EU Directive 2002/9/EC Design Meets UL6090-, EN6090-, and IEC6090- Vertical Mounting and Horizontal Mounting Types Available APPLICATIONS Wireless Networks Telecom / Datacom Industry Control Systems Semiconductor Equipment Distributed Power Architectures Microprocessor Power Applications DESCRIPTION The CV series consists of non-isolated DC/DC converters that can deliver up to 3A of output current in a small open frame package. This series features remote ON/OFF, adjustable output voltage, and efficiency up to 9% at 2VDC and full load. This series also has over current, over temperature, and short circuit protection. The CV series is RoHS compliant and has UL6090-, EN6090-, and IEC6090- safety approvals. Both vertical (standard) and horizontal ( A suffix) SIP mounting types are available. 2/20/ Fax Page of
2 SPECIFICATIONS: All specifications are based on 2 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS VDC input models (Vin>Vo+0.V) 2.. VDC Input Voltage Range (See Note 7) 2VDC input models (Vin>Vo+2.0V) VDC 24VDC input models (Vin>Vo+2.V) VDC No Load Input Current See Table Maximum Input Current Vin=Vin(min); Io=Io(max) See Table Input Filter C filter Input Reflected Ripple Current (See Note 8) 30 ma OUTPUT SPECIFICATIONS Output Voltage (Voltage Adjustability) See Figure and Note 6 See Table Vo 2.VDC % Vo Line Regulation Vo < 2.VDC mv Load Regulation Vo 2.VDC % Vo 0% to 00% of full load Vo < 2.VDC 20 mv Vo 2.VDC % Vo 0% to 90% of full load Vo < 2.VDC mv Voltage Accuracy (max.) Full load % Vo set Output Power.8 4 Watts Output Current 3 A Ripple & Noise 20MHz Bandwidth See Table Output Voltage Overshoot -Startup full load % Vo Minimum Load 0 % ESR mω 00 μf External Load Capacitance CV24S Others ESR 0mΩ 200 μf ESR mω 000 µf ESR 0mΩ 3000 µf VDC input models 280 % 2VDC input models 220 % Output Current Limit 24VDC input models 220 % Rise Time V &2V input models 6 ms Time for Vo to rise from 0% to 90% Vo 24V input models 0 ms Temperature Coefficient (max) - + %/ C REMOTE ON/OFF (See Note 9) CVS (positive logic) ON Open or Vin (max) OFF 0V < Vr < 0.3V Others (positive logic) ON V < Vr < 2V OFF 0V < Vr < 0.3V DYNAMIC LOAD RESPONSE Peak Deviation CV24S mv Load step change 0% to 00% and 00% to 0% of full load Others 0 mv Recovery Time Load step change 0% to 00% and 00% to 0% of full load 20 µs PROTECTION Short Circuit Protection Hiccup, automatic recovery Over Current Protection yes Over Temperature Protection Internal IC Junction 0 C GENERAL SPECIFICATIONS Efficiency Nominal input voltage and full load See Table CVS & CV2S Models 600 KHz Switching Frequency CV24S-3000 & CV24S Models 300 KHz Isolation Voltage none ENVIRONMENTAL SPECIFICATIONS Operating Temperature With derating C Storage Temperature - +2 C Thermal Shock MTBF (See Note ) PHYSICAL SPECIFICATIONS Weight Dimensions (L x W x H) SAFETY Safety Approvals BELLCORE TR-NWT MIL-HDBK-27F VDC & 2VDC input models 24VDC input models VDC & 2VDC input models 24VDC input models MIL-STD-80F 6,20,000 hours,638,000 hours 0.06oz (.7g) 0.074oz (2.g) 0.37 x 0.24 x 0.6 inches (9.4 x 6.0 x. mm) 0.4 x 0.24 x 0.6 inches (0.4 x 6 x 6. mm) IEC6090-, UL6090-, EN6090-2/20/ Fax Page 2 of
3 MODEL SELECTION TABLE Model Number Input Voltage Range (7) Nominal Input Voltage Output (6) Voltage Output Current Min Load Max Load Max Input Current (4) No Load Current (2) Ripple & Noise () Output Power Efficiency (3) CVS VDC VDC VDC 0A 3A 3.0A 20mA 30mVp-p.8W 9.9W 2.Vo CV2S VDC 2VDC VDC 0A 3A 2.6A 2mA 60mVp-p 7.W 8W 3.3Vo CV24S VDC 24VDC VDC 0A 3A.3A 2mA 7mVp-p 9W 8W CV24S VDC 24VDC VDC 0A 3A 3.0A 30mA 0mVp-p W 4W 2Vo NOTES. BELLCORE TR-NWT Case : 0% Stress, Temperature at 40 C. (Ground, Benign, controlled environment) MIL-HDBK-27F C, Full load. (Ground, Benign, controlled environment) 2. Typical value at nominal input voltage and no load. 3. Typical value at nominal input voltage and full load. 4. Maximum value at minimum input voltage and full load.. CV24S-3000 and CV24S2-3000: External with C out = 2.2µF ceramic. 6. Output voltage programmable from 0.6V to 3.3V, 0.9V to 6.0V, 3.0V to 6.0V, and.0v to V by connecting a single resistor between the TRIM and GND pins of the module. To calculate the value of the resistor (R trim ) for a particular output voltage (Vo), use the equations shown in Table. 7. CV2S : When Vo, set < 0.9VDC the input voltage range is VDC. 8. CV24S-3000 and CV24S2-3000: An external π filter on the input of the module is recommended to minimize input reflected ripple. The filter is shown in Figure The ON/OFF control pin voltage is referenced to GND. 0. Both vertical mounting and horizontal mounting SIP types are available. Add the suffix A to the model number for horizontal mounting SIP type.. CAUTION: This power module is not internally fused. An input line fuse must always be used. Figure Model Name CVS Table R trim_up (KΩ).2 Vo CV2S CV24S Vo Vo - 3 TO OSCILLOSCOPE Figure 2 CURRENT PROBE CV24S Vo - 2/20/ Fax Page 3 of
4 CHARACTERISTICS CV2S Derating Curve CV2S Efficiency vs Input Voltage CV2S Efficiency vs Output Load MECHANICAL DRAWINGS VERTICAL MOUNTING SIP TYPE (Standard) HORIZONTAL MOUNTING SIP TYPE ( A Suffix) CVS CVS A CTRL Trim Tolerance: X.XX±0.02 (X.X±0.) X.XXX±0.0 (X.XX±0.2) Pin Pitch Tolerance: ±0.0 (0.2) CTRL Trim Tolerance: X.XX±0.02 (X.X±0.) X.XXX±0.0 (X.XX±0.2) Pin Pitch Tolerance: ±0.0 (0.2) CV2S CV2S A CTRL Trim 0.02(0.64) SQUARE PINs (TYP.) CTRL Trim Tolerance: X.XX±0.02 (X.X±0.) X.XXX±0.0 (X.XX±0.2) Pin Pitch Tolerance: ±0.0 (0.2) Tolerance: X.XX±0.02 (X.X±0.) X.XXX±0.0 (X.XX±0.2) Pin Pitch Tolerance: ±0.0 (0.2) CV24S-3000 & CV24S CV24S-3000A & CV24S2-3000A CTRL Trim Tolerance: X.XX±0.02 (X.X±0.) X.XXX±0.0 (X.XX±0.2) Pin Pitch Tolerance: ±0.0 (0.2) CTRL Trim Tolerance: X.XX±0.02 (X.X±0.) X.XXX±0.0 (X.XX±0.2) Pin Pitch Tolerance: ±0.0 (0.2) 2/20/ Fax Page 4 of
5 COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 0 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: Web: Address: (603) (888)87-92 (603) sales@wallindustries.com Watson Brook Rd. Exeter, NH /20/ Fax Page of
PXD30-xxWS-xx-Single Output DC/DC Converters
PXD30-xxWS-xx-Single Output DC/DC Converters 9 to 36 Vdc and 18 to 75 Vdc input, 1.5 to 15 Vdc Single Output, 30W Applications Wireless Network Telecom / Datacom Industry Control System Measurement Semiconductor
More informationPXD10-Single Output DC/DC Converter
PXD10-Single Output DC/DC Converter 9 to 18 Vdc, 18 to 36 Vdc and 36 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 10W Features Single output current up to 2A 10 watts maximum output power 2:1 wide input
More informationDC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output
THN 20WI Series Application Note DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless
More informationFED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option
More information9 to 36 Vdc and 18 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 40W. Features
PXF40xxWSxx Single Output DC/DC Converter 9 to 36 Vdc and 18 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 40W Features Single output current up to 10A 40 watts maximum output power 4:1 ultra wide input
More informationFED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly Option Voltage Quantity Voltage Range Option
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly
More information200 WATT TH SERIES DC/DC CONVERTERS
Features 4:1 Input voltage range High power density Small size 2.4 x 2.28 x 0.65 Efficiency up to 90 Excellent thermal performance with metal case Pulse-by-pulse current limiting Over-temperature protection
More informationAA SERIES (1 x 1 Package) Up to 10 Watt DC-DC Converter
FEATURES Industry standard footprint (1 inch X 1 inch) Regulated Outputs, Fixed Switching Frequency Up to 87 % Efficiency Low No Load Power Consumption Designed for use without tantalum capacitors -40
More informationRPP20-W. Features ICE Technology* POWERLINE+ 20 Watt 4:1 Single & Dual Output. DC/DC-Converter with 3 year Warranty
Features ICE Technology* Description 115 C Maximum Case Temperature -40 C Minimum Temp. UL Certified Built-in FCC/EN55022 Class B Filter 4:1 Wide Input Voltage Range Six Sided Shielded Enclosure Ribbed
More informationRA2415UW8. 8 W DC-DC Converter 9-36 Vdc Input 15 Vdc Output at A DIP Package High Reliability COTS Converter
8 W DC-DC Converter 9-36 Vdc Input 15 Vdc Output at 0.533 A DIP Package High Reliability COTS Converter Features: Over 85% Efficient at Full Load Wide Input Range Fast Transient Response Low Output Ripple
More information25 Watt QMZ Single and Dual Series
Single and Dual Series Efficiency up to % 10 VDC Isolation 4:1 Ultra Wide Input Range Remote On/Off Control No Minimum Requirement Six Sided Shielding Trim RoHS Compliant CSA Approved Model Number Voltage
More informationAS SERIES (2.00 x 1.6 Package) Up to 20 Watt DC-DC Converter
PRODUCT OVERVIEW The AS series offer up to 20 watts of output power in standard 2.00 x 1.60 x 0.45 inches packages. This series features high efficiency and 1500 Volts of DC isolation. The AS series provides
More information40 Watt TMF Single and Dual Series
Watt TMF Single and Dual Series Efficiency up to 91% 10VDC Isolation MTBF > 328,000 Hours 4:1 Wide Input Over Voltage Protection Short Circuit Protection Six Sided Shielding Remote On/Off Control RoHS
More informationRPP30. Features ICE Technology* POWERLINE+ 30 Watt 2:1 Single & Dual Output. DC/DC-Converter with 3 year Warranty
Features ICE Technology* Description 115 C Maximum Case Temperature -40 C MinimumTemp. Built-in FCC/EN55022 Class B Filter 2:1 Wide Input Voltage Range Six Sided Shielded Enclosure Ribbed or Baseplate
More informationPRODUCT OVERVIEW. APPLICATIONS: Distributed Power Architectures Mobile telecommunication Industrial applications Battery operated equipment
FEATURES Industry Standard 24-Pin DIP package 15Watts Isolated Output 4:1 Input Range Regulated Outputs Up to 90 % Efficiency Low No Load Power Consumption -40 C to +85 C industrial temperature range Negative
More informationFor more information, please visit the product page. input voltage 1 range. output voltage
date 9/12/218 page 1 of 1 SERIES: V78E--SMT DESCRIPTION: NON-ISOLATED DC SWITCHING REGULATOR FEATURES 1 A of output current efficiency up to SMT package industrial operating temp -~+ C designed to meet
More informationhttp://www.mmtmachrone.com 96D SERIES FEATURES: 30W DIL PACKAGE Recognized By UL 60950-1 2:1 WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY UL 94V-0 PACKAGE MATERIAL CUSTOMIZED SOLUTIONS AVAILABLE RoHS
More informationAA SERIES (1 x 1 Package) Up to 30 Watt DC-DC Converter
FEATURES Industry standard footprint (1 inch X 1 inch) Regulated Outputs, Fixed Switching Frequency Up to 90 Efficiency Low No Load Power Consumption Designed for use without tantalum capacitors -40 C
More informationWAF S 12 W - N S DR Series Name Input Output Output Input Remote Control Load Share Assembly Voltage Quantity Voltage Range Option Option Option
Railway Automation Datacom IPC Industry Measurement Telecom Charger Automobile Boat Medical PV PART NUMBER STRUCTURE WAF300-48 S 12 W - N S DR Series Name Input Output Output Input Remote Control Load
More informationSMT20C SERIES. Single Output TÜV. SMT20C Series 20 A DC-DC Converter C Class Non-Isolated
SMT20C SERIES Single Output Wide output voltage trim (0.9 Vdc to 5.0 Vdc, 20 A max.) Power good output signal (open collector) Input undervoltage lockout Current sink capability for termination applications
More informationSIL20C SERIES. Single Output. SIL20C Series 20 A DC-DC Converter C Class Non-Isolated
SIL20C SERIES Single Output Wide output voltage trim (0.9 Vdc to 5.0 Vdc, 20 A max.) Power good output signal (open collector) Input undervoltage lockout Current sink capability for termination applications
More informationNetworking Computers and Peripherals Telecommunications
The 0RCY-60U12x is part of the isolated DC/DC converters that operate from a wide input range (18 VDC - 75 VDC) and can cover both 24 Vin and 48 Vin input range. These units will provide up to 84 W of
More information15 W DC/DC CONVERTERS. SERIES DESCRIPTION Page. PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation
15 W DC/DC CONVERTERS SERIES DESCRIPTION Page PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation PC15WR4 4:1 Input Range 6 2 x 1 Metal Can Package 2kv Isolation CTC TECHNOLOGY CO.,LTD. DC /
More informationFeatures. Switching Regulator. 1-2 Amp SIP12 Vertical & Horizontal Single Output. R-6xxxP_D. R-6 x. DC/DC Converter
Features Switching Regulator Description Non-isolated Adjustable output voltage 1-2AMP adjustable positive step down integrated switching regulator Internal short circuit protection ON/OFF control (ground
More informationSeries AM50E-NZ 50 Watt DC-DC Converter
FEATURES: Wide Input range 2:1 Input to Output Isolation of 1500 High Efficiency up to 93% Input Over Voltage and Under Voltage Lockout Remote On/Off Control Output OVP, OCP & SCP Trim Adjustment Operating
More informationOutput Input Efficiency PARD (mvp-p) Vin Nom. (V)
Features: Small size, minimal footprint SMT/SIP package 5A Output Current (all voltages) High Efficiency: up to 94% High reliability RoHS Compliant Cost efficient open frame design Output voltage programmable
More informationFeatures. Switching Regulator. 2,3,4 Amp SIP12 Vertical & Horizontal Single Output. R-7xxxP_D. R-7 x. DC/DC Converter
Features Switching Regulator Description Non-isolated Synchronous rectification design Adjustable output voltage 2, 3, 4Amp adjustable positive step down Integrated switching regulator Over load protection
More informationOutput Full Load
SERIES DC-DC CONVERTER 2:1 & 4:1 WIDE INPUT RANGE UP TO 3.3 WATTS FEATURES REINFORCED INSULATION FOR 2VAC WORKING VOLTAGE CLEARANCE AND CREEPAGE DISTANCE :8.0mm/2MOPP 00VAC INPUT TO OUTPUT 2MOPP ISOLATION
More informationMI2500RU. Series. Compact, 1 x 1 Inch 25W, 4:1 Input Range DC/DC Con vert ers. Key Features: Electrical Specifications
MI2500RU Compact, 1 x 1 Inch 25W, 4:1 Input Range DC/DC Con vert ers Electrical Specifications Key Features: 25W Output Power 4:1 Input Voltage Range Compact 1 x 1 Inch Case 1,500 VDC Isolation 12 Standard
More informationhttp://www.mmtmachrone.com 93D SERIES FEATURES: 60W DIL PACKAGE INDUSTRY STANDARD PACKAGE 2:1 WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY UL94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS COMPLIANT
More informationNote1: Measured at nominal input voltage and full load Note2: Measured at minimum input voltage and constant resistive load
Features Regulated Converters Description :1 wide input voltage range 1.kV isolation UL certified Efficiency up to 88% Fixed operating frequency Six-Sided continuous shield No minimum load required The
More informationOutput Input Efficiency PARD (mvp-p) Vin Nom. Regulation Max (V)
Features: Small size, minimal footprint SMT/SIP package A Output Current (all voltages) High Efficiency: up to 9% High reliability RoHS Compliant Cost efficient open frame design Output voltage programmable
More informationDC/DC Converter K78_T-500R3 Series
Wide input voltage Non-isolated and Regulated Single Output RoHS FEATURES High efficiency up to 95% No-load input current as low as 0.2mA Operating ambient temperature range -40 to +85 Output short-circuit
More informationNON-ISOLATED DC/DC CONVERTERS 5 Vdc Vdc Input 0.6 Vdc Vdc/40 A Output
NONISOLATED DC/DC CONVERTERS 5 Vdc dc Input 0.6 Vdc 5.0 Vdc/40 A Output xrp240e1a0 RoHS Compliant Rev.D NonIsolated Output OverVoltage Shutdown High OCP/SCP Fixed Switching Frequency Low Output Ripple
More informationS24SP12004 series 40W Single Output DC/DC Converter
FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink 5.8 x25.4 x17.5mm (2.
More informationVOF XX - XXX - X
date 01/31/018 page 1 of 10 SERIES: VOF-300 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 300W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction
More informationS24SP05012 series 60W Single Output DC/DC Converter
Model List Model Number S24SP05012 Input Voltage (Range) Output Voltage Output Current Input Current (typ input voltage) Load Regulation Maxcapacitive Load (Cap ESR>=10mohm;Full Efficiency load;5%overshoot
More informationS24SP24003 series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 93% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink 5.8 x25.4 x17.5mm (2. x1.
More informationFeatures. Regulated Converters. RS6 6 Watt. SIP8 Single and Dual Output. DC/DC Converter. Description. Selection Guide
Features Regulated Converters Description Highest Power Density In SIP Package 1.6kVDC/1 Minute Isolation Efficiency Up To 88% -4 C To +75 C Operating Temperature Range @ Full Load EN695 And UL/EN62368-1
More information(typ.) (Range) Parameter Model Min. Typ. Max. Unit
FEATURES Smallest Encapsulated 20W! Package Size 1.0 x1.0 x0.4 Ultra-wide 4:1 Input Range Very high Efficiency up to % Operating Temp. Range - C to +85 C Output Voltage Trimmable I/O-isolation Voltage
More informationQAE100W SERIES QUARTER-BRICK DC-DC CONVERTER
SERIES QUARTER-BRICK DC-DC CONVERTER 4:1 ULTRA WIDE INPUT RANGE UP TO 90Watts FEATURES NO MINIMUM LOAD REQUIRED LOW STANDBY POWER CONSUMPTION SOFT-START 2250 INPUT TO OUTPUT BASIC INSULATION SAFETY MEETS
More informationSPS20 Series small size isolated DC/DC converters
SPS20 Series small size isolated DC/DC converters Features High Efficiency Wide operating temperature range ( -20 C to +71 C ) Wide 2:1 input range Built in over current protection circuit Input Output
More informationVMS-300A - XX - XXX - X
date 05/16/017 page 1 of 10 SERIES: VMS-A DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction remote
More informationVolant NEA005 Series Non-Isolated 5A SIP/SMT DC/DC Converters
Typical units FEATURES Small size, minimal footprint SMT/SIP package 5A Output Current (all voltages) High Efficiency: up to 92% High reliability RoHS Compliant Cost efficient open frame design Output
More informationOutput Current Input Current Load Regulation
PB01S/D series 1W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 1% SIP Package with Industry Standard Pinout Package Dimension: 5V&12V Models: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 15V&24V
More informationSPS20 Series small size isolated DC/DC converters
18 36Vdc Input, Maximum Power: 20W FEB 10, 2011 SPS20 Series small size isolated DC/DC converters Features High Efficiency Wide operating temperature range ( -20 C to +71 C ) Wide 2:1 input range Built
More informationVolant NCF010 Series. Non-Isolated 10A SIP DC/DC Converters
Features: Small size, minimal footprint/low profile A Output Current (all voltages) High Efficiency: up to 95% High reliability RoHS Compliant Cost efficient open frame design Pre-bias monotonic start-up
More informationEfficiency (typ.) (Range) Load. Output Current Input Current Reflected Ripple
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Ultra Wide 4:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC
More informationVFB400W - QXX - SXXX
date 01/30/2014 page 1 of 10 SERIES: VFB400W DESCRIPTION: DC-DC CONVERTER FETURES 400 W isolated output industry standard full brick package 4:1 input range (9~36, 18~75 ) single regulated outputs from
More informationMI2000ERW. Series. Miniature 1 x 1 20W, Ultra-Wide 2:1 Input DC/DC Con vert ers. Key Features:
MI2000ERW Miniature 1 x 1 20W, Ultra-Wide 2:1 Input DC/DC Con vert ers Key Features: 20W Output Power 2:1 Input Voltage Range Miniature 1 x 1 Case 1,500 VDC Isolation Meets CISPR 32/EN 55032 High Efficiency
More informationESB Series Embedded EMC Filter Up to 40W converter
Features High Ffficiency up to 91% 2:1 / 4:1 Ultra-Wide input range Compact size 1.6 x 1.0 x 0.4 & 1.6 x 1.0 x 0.5 Standard DOSA pin out; Fully replaceable with 2 x1 standard case Metal Case Six-Sided
More informationFeatures. Regulated Converter. 5 Watt DIP24 Single Output. Rxx-B R - B. DC/DC Converter
Features Regulated Converter High output voltage DIP24 converter Adjustable output voltage up to VDC Cascadable for output voltages up to VDC 3kVDC input/output isolation Remote voltage programming by
More informationEfficiency (typ.) (Range) Load VDC VDC ma ma(typ.) ma(typ.) μf % MCWI05-12S
FEATURES Smallest Encapsulated 5W Ultracompact SIP8 Package Ultrawide 4 : 1 Input Voltage Range Fully Regulated Output Voltage I/O Isolation 1500 VDC Operating Ambient Temp. Range40 to 75 No Min. Requirement
More informationDelphi D12S2R550 Non-Isolated Point of Load
FEATURES High Efficiency: 93.6% @ 12Vin, 5.0V/50A out Wide input range: 4.5V~13.8V Output voltage programmable from 0.6Vdc to 5.0Vdc via external resistors No minimum load required Fixed frequency operation
More informationSMT10E Series. 3.0 Vin to 5.5 Vin Single output. SMT10E Series 10 A DC-DC Converter E Class Non-Isolated
SMT10E Series 3.0 Vin to 5.5 Vin Single output 10 A Current rating Input voltage range: 3.0 Vdc to 5.5 Vdc Output voltage range: 0.8 Vdc to 3.63 Vdc Ultra high efficiency: 96% @ 5 Vin and 3.3 Vout Extremely
More information1 V/ms Undervoltage lockout: V typ. Track input voltage: Pin 8 (See Note 6, page 3) ± 0.3 Vin
PTH0 SERIES PTH0 Vin Total Power: 55 Watts # of Outputs: Single Special Features 0 A output current V input voltage Wide-output voltage adjust. Vdc - 5.5 Vdc for suffix W & 0.8 Vdc -.8 Vdc for suffix L
More informationPinning (3) 4:1 Input Single or Dual. Notes: Note3: /X2 is without ON/OFF CTRL and without Output Voltage Trimming
Features Regulated Converters 4:1 wide input voltage range Compact size 1 x1 package Efficiency up to % Wide operating temperature from - C to +75 C without derating Continuous short circuit protection
More informationFeatures. Block Diagram
Features WATT SMT SINGLE SMT Technology 2:1 Input Range Efficiency up to 8 I/O Isolation 100 Short Circuit Protected MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
More informationSeries AMSRL1-78JZ Up to 12 Watt DC-DC Switching Regulator
Click on Series name for product info on aimtec.com FEATURES: Picture Coming Soon Models Single output Model Input Voltage (V) Switching Regulator SMD Package Low Quiescent Current Efficiency Up To 95%
More informationFeatures. Switching Regulator. 2,3,4,5 Amp SIP12 Vertical & Horizontal Single Output. R-5xxxPA_DA. R-5 xa. DC/DC Converter
Features Switching Regulator Description Non-isolated Synchronous rectification design Adjustable output voltage 2, 3, 4 & 5AMP adjustable positive step down integrated switching regulator Over load protection
More informationFeatures. Unregulated Converters. 1 Watt SIP6 Micro Size, Single and Dual Output RBM. RBM- / Protection (3) Single or Dual.
Features Unregulated Converters Micro size SIP 6 package Industry standard pinout Power sharing on dual output version 3kVDC/1s basic isolation Optional continuous short circuit protection Efficiency up
More informationSingle negative output
SIL25C SERIES Single negative output Trim range (-4.5 Vdc to -5.5 Vdc) High power density design means reduced board space requirement Remote sense Power good output signal (open collector) Operating ambient
More informationMLSR100 Series. High Efficiency, 1.0A Surface Mount, POL Switching Regulators. Key Features:
MLSR100 Series High Efficiency, 1.0A Surface Mount, POL Switching Regulators Electrical Specifications Specifi cations typical @ +25 C, nominal input voltage & rated output current, unless otherwise noted.
More informationHRS50 Series 50W isolated DC/DC converters
HRS50 Series 50W isolated DC/DC converters Features High Efficiency Wide operating temperature range ( -40 C to +85 C ) Wide 2:1 input range Standard half brick size Six side shield Input Output Isolated
More informationRipple & Max. capacitive Output Current
0 Watts xxx Series Wide 4: Input Range Single Output Industry Standard /4 Brick -40 C to +0 C Operation 0 VDC Isolation Output Trim ±0% Remote On/Off Year Warranty Dimensions: QSC0:. x.4 x 0. (.9 x. x.
More informationOutput Current Max (ma) Isolation (VDC)
Models Single output Model Input FEATURES: RoHS Compliant Operating Temperature - C to + 85 C High Efficiency up to 84% Continuous Short Circuit Protection Remote On / Off Control Wide 2:1 Input Range
More informationPTH Vin single output. DC/DC CONVERTERS POLA Non-isolated 1. NEW Product
PTH0 DC/DC CONVERTERS POLA Non-isolated 0 A output current V input voltage Wide-output voltage adjust. Vdc to 5.5 Vdc for suffix W and 0.8 Vdc to.8 Vdc for suffix L Auto-track sequencing* Margin up/down
More informationSwitching Regulator. LMT78_1.0R Series Wide input, non-isolated & regulated, single output, SMD package
Efficiency up to 95 No need for heat sinks 1.0AMP SMD package Wide input voltage range (4.75V - 36V) Adjustable output voltage Remote ON/OFF control Short circuit protection (SCP), thermal shutdown Very
More informationn Compatible with RoHS EU Directive /EC n Compatible in Pb- free or SnPb reflow environment n Nonisolated output n High efficiency: 86% typical
Applications n Distributed Power Architectures n Communication Equipment n Computer Equipment Options RoHS Compliant Features n Compatible with RoHS EU Directive 200295/EC n Compatible in Pb- free or SnPb
More informationSeries AM30EW-Z 30 Watt DC-DC Converter
EATURES: Models Single output Model Input Voltage Ultra Wide 4:1 input range Remote on/off control Efficiency up to 91% Input/ Isolation 1600VDC Soft start Operating temperature -40ºC to + 75ºC Continuous
More informationV78 XX X SERIES: V DESCRIPTION: NON-ISOLATED SWITCHING REGULATOR MODEL PART NUMBER KEY. RoHS
date 04//0 page of 7 SERIES: V78-000 DESCRIPTION: NON-ISOLATED SWITCHING REGULATOR FEATURES A current output extremely high efficiency up to 97% no heat sink required pin compatible to LM78XX linear regulators
More informationNote1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage.
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Built-in EMC Filter, EN-522 Class B The RPP20 series
More informationNote1: Max. capacitive load is tested at nominal input and constant resistive load. RI3- _/_ Isolation (2) Single
Features Unregulated Converters 3 Watt in a SIP4 Package -3kVDC Isolation Efficiency up to 9% -4 C to + C Operating Temperature Range IEC/EN/UL69 (Pending) CB Report (Pending) Industry Standard Pinout
More informationOVP 2:1. Wide Range. Protection
10W, Wide Input Range DIP, Single & Dual Output DC/DC s Key Features High Efficiency up to 88 10 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range CSA9-1 Safety Approval Complies with EN522 Class A
More informationDistributing Tomorrow s Technologies For Today s Designs Toll-Free:
2W, Wide Input Range DIP, Single & DC/DC s Key Features Efficiency up to 81 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range CSA1 Safety Approval Low Ripple and Noise Short Circuit Protection Complies
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 30 U S 12 B - Application Package Dimension Output Input Output Output Protection
More informationMIW3000 Series EMI. 5-6W, Wide Input Range DIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
-6W, Wide Input Range DIP, Single & DC/DC s Key Features Efficiency up to 10 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range UL19 Safety Approval Complies with EN22 Class A Temperature Performance
More informationVolant NEA005 Series. Non-Isolated 5A SIP/SMT DC/DC Converters. FEATURES. Small size, minimal footprint SMT/SIP package
Typical units FEATURES Small size, minimal footprint SMT/SIP package 5A Output Current (all voltages) High Efficiency: up to 92% High reliability RoHS Compliant Cost efficient open frame design Output
More informationMAX. OUTPUT POWER 24/48/72/96/110 VDC 5 VDC 6 A 30 W 82% 0RQB-30Y05L. 0 R QB - 30 Y 05 L y. Output Power. Input Range
The 0RQB-30Y05L is an isolated DC/DC converter providing 30 W of output power from a wide input range (24 V, 48 V, 72 V, 96 V, 110 V typical). Standard features include remote on/off, input under-voltage
More informationThe 0RQB-C5U54x is an isolated DC-DC converter that operates from a nominal 24 VDC, 48 VDC source.
The 0RQB-C5U54x is an isolated DC-DC converter that operates from a nominal 24 VDC, 48 VDC source. This unit will provide up to 162 W of output power from a nominal 24 VDC, 48 VDC input. This unit is designed
More informationISOLATED DC/DC CONVERTERS 48 Vdc Input, 12 Vdc/8.35 A Output
0RQB-C0U12C RoHS Compliant PRELIMINARY Rev.A Isolated Output Over Voltage Shutdown High Efficiency OCP/SCP High Power Density Over Temperature Protection Low Cost Remote On/Off Input Under Voltage Lockout
More informationS24SE/S24DE series 30W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 89% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current
More information24 Austin Lynx TM : Non-Isolated DC-DC Power Modules 20Vdc 30Vdc input; 5.0 Vdc to 15 Vdc output; 70W Output Power
24 Austin Lynx TM : Non-Isolated DC-DC Power Modules 20Vdc 30Vdc input; 5.0 Vdc to 15 Vdc output; 70W Output Power RoHS Compliant Features Compliant to RoHS EU Directive 2011/65/EU (-Z versions) Compliant
More informationISOLATED DC/DC CONVERTERS 48 Vdc Input 1.2 Vdc - 12 Vdc / 8.33 A - 30 A Output, 1/8 Brick Converter
48 Vdc Input 1.2 Vdc 12 Vdc / 8.33 A 3 Output, 1/8 Brick 0RCY85T Series RoHS Compliant Rev.B Isolated Output Over Voltage Shutdown High Efficiency OCP/SCP High Power Density Over Temperature Protection
More informationNotes: Note1: Max. capacitive load is tested at nominal input voltage and full load. Single or Dual
Features Regulated Converters Description 6-Side Shielding External ON/OFF control 1.6kV Isolation UL/CSA/EN-695-1 Certified 2:1 Input Voltage Range Continuous Short Circuit Protection Efficiency up to
More informationSTB Series 2:1 & 4:1 Vin range / up to 60W 1/16 Brick
2:1 & 4:1 Vin range / up to W 1/16 Brick Features Industry-Standard DOSA pin out 4:1 / 2:1 Ultra-Wide input range High Ffficiency 91%@ 5V (SR topology) Compact size 1.49 x 1.46 x.5 Metal Case Six-Sided
More informationS24SP series 60W Single Output DC/DC Converter
Model List Model Number Input Voltage (Range) Output Voltage Output Current Input Current (typ input voltage) Load Regulation Maxcapacitive Load (Cap ESR>=1mohm;Full Efficiency (typ.) load;5%overshoot
More informationElectrical Specifications
Series 0 Watts C-Class Non-Isolated SXX06E Rev. 08.0.06 Page of 2 of Total Power: 0 Watts Input Voltage: 3-3.8 Vdc No. of s: Single Special Features 0 A current rating Adjustable output voltage: 0.9 -.
More informationWRA_CKS-1W & WRB_CKS-1W Series 1W, WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT SIP DC-DC CONVERTER
WRA_CKS-W & WRB_CKS-W Series W, WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT SIP DC-DC CONVERTER FEATURES 2: wide input range 500VDC Isolation Short circuit protection (automatic recovery) Remote
More informationSB_XT-1WR2 Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT
www.schmid-m.com DC/DC Converter SB_XT-1WR2 Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT FEATURES Miniature SMD package 1VDC isolation Operating temperature range: -4 ~+15 Internal SMD
More informationRT1- D3WR Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT
RT1- D3WR Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT FEATURES Miniature SMD package 3VDC isolation Operating temperature range: - ~+15 Efficiency up to 81% Internal SMD construction No
More informationFor more information, please visit the product page If your application requires forced air, view our Dc Fans. output. output current max (ma)
date 12/08/2017 page 1 of 10 SERIES: PBO-1 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 1 W continuous power ultra-compact SIP package available in straight-pin and bent-pin configurations wide input
More informationEfficiency (typ.) (Range) Max. Load VDC VDC ma ma ma(typ.) ma(typ.) μf % MJWI10-24S033
FEATURES Package Size 1.0 x1.0 x0.4 Ultrawide 4:1 Input Range High Efficiency up to 87% Operating Temp. Range 40 C to 80 C I/Oisolation Voltage 1500VDC Remote On/Off Control Input Filter complies to EN55022,Class
More informationS24SE/S24DE series 15W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 89% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M S D 30 U S 12 B - T Application Package Dimension Output Input Output Output Protection
More informationSPS1R5-5 Series small size isolated DC/DC converters
SPS1R5-5 Series small size isolated DC/DC converters Features High Efficiency Wide operating temperature range ( -40 C to +85 C ) Wide 2:1 input range Dimensions 18.50 x 8.50 x 16.0 (mm) Built in over
More informationDistributing Tomorrow s Technologies For Today s Designs Toll-Free:
3W, Wide Input Range DIP, Single & DC/DC s Key Features Efficiency up to 82 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range Low Cost Complies with EN022 Class A Temperature Performance -2 to +71
More informationNON-ISOLATED DC/DC CONVERTERS 8.3 Vdc - 14 Vdc Input 0.75 Vdc Vdc/16 A Output
NONISOLATED DC/DC CONVERTERS 8.3 Vdc 14 Vdc Input 0.75 Vdc 5.0 Vdc/16 A Output SRBC16A2Ax RoHS Compliant Rev.A NonIsolated Undervoltage Lockout (UVLO) High Over Temperature Protection High Power Density
More informationPM24S/DR24S series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 92% Wide input range, 9V-36V Package Dimension: Panel Mount: 100.0*56.0*19.0mm (3.94 * 2.20 *0.75 ) Din Rail: 118.6*67.1*23.5mm (4.67 *2.64 *0.93 ) Over voltage protection, hiccup
More informationDN03S/D Series DC/DC CONVERTER 2-3W, DIP-Package
DN03S/D Series DC/DC CONVERTER 2-3W, DIP-Package FEATURES DIP-24 Plastic Package Wide 2:1 Input Range Operating Temp.Range -40 to +85 C Overload Protection No Minimum Load Requirement Isolation voltage
More information