Vipros 255 Machine Programming Limits

Transcription

1 Amada America Inc Firestone Blvd. Buena Park, CA Phone: Fax: Print Date 01/10/2001 Revision 4.0 Page 1 of 15

2 Table of Contents Programmable Travel Limits...3 Programmable Feed Rates...4 Punching Mode...4 Contouring Mode...4 Punch Confirmation Area / Punching Dead Zone...5 Definitions...5 A Size (½") Station...6 A Size Track 200 Stations...6 A Size Track 300 Stations...7 B Size (1¼") Station...8 B Size Track 200 Stations (Auto Index only)...8 B Size Track 300 Stations...9 C Size (2") Station...10 C Size Track 200 Stations...10 C Size Track 200 Stations Auto Index...11 D Size (3½") Station...12 D Size Track 200 Stations...12 Reposition Holddown Locations...13 Material Clamp Location...14 Turret Layout 31 station 3 A/I...15 Print Date 01/10/2001 Revision 4.0 Page 2 of 15

3 Programmable Travel Limits Y Track 200 Track 300 0" X Y-axis Movable Distance 0" By Track Numbers Origin Statement X-axis Center Track Outer Track X-axis Origin Y-axis Origin Movable Distance 200 Stations 300 Stations " " -.400" to " -.400" to " " to " Print Date 01/10/2001 Revision 4.0 Page 3 of 15

4 Programmable Feed Rates Punching Mode F1 = 3,229. IPM F2 = 2,421. IPM F3 = 1,614. IPM F4 = 807. IPM Contouring Mode G00 max. 3,149. IPM G01 max IPM G02 max IPM optional G03 max IPM optional Print Date 01/10/2001 Revision 4.0 Page 4 of 15

5 Punch Confirmation Area / Punching Dead Zone. Definitions Confirmation Zone = An area that when the confirmation switch is in the on position or it is the first run of the part program the operator must confirm the punch by pressing the confirmation pushbutton. Punch Dead Zone = An area that the operator must confirm the punch by pressing the punch and confirmation buttons. Punching in this area with standard tools may damage the material, material clamp, tool, other machine components and may cause operator injury. Y-Overtravel Zone = An area that exceeds the travel limits of the machine. Print Date 01/10/2001 Revision 4.0 Page 5 of 15

6 A Size (½") Station A Size Track 200 Stations Track 200 Station Track 300 Station 2.9" Turret Punch Dead Zone 1.2" Confirmation Zone 7.1" Material Clamp 2.75" 2.75" 7.1" Edge of Material Material Clamp Centerline Print Date 01/10/2001 Revision 4.0 Page 6 of 15

7 A Size Track 300 Stations Track 200 Station Track 300 Station Turret Punch Dead Zone 1.2" 1.3" Confirmation Zone 7.1" Material Clamp 2.75" 2.75" 7.1" Edge of Material Material Clamp Centerline Print Date 01/10/2001 Revision 4.0 Page 7 of 15

8 B Size (1¼") Station B Size Track 200 Stations (Auto Index only) Track 200 Station Punch Dead Zone 2.80" Turret 1.60" Confirmation Zone Material Clamp Edge of Material 3.30" 3.30" Material Clamp Centerline Print Date 01/10/2001 Revision 4.0 Page 8 of 15

9 B Size Track 300 Stations Track 300 Station Punch Dead Zone Turret 1.60" Confirmation Zone Material Clamp 3.30" 3.30" Edge of Material Material Clamp Centerline Print Date 01/10/2001 Revision 4.0 Page 9 of 15

10 C Size (2") Station C Size Track 200 Stations Track 200 Station Punch Dead Zone 2.80" Turret 2.1" Confirmation Zone Material Clamp Edge of Material 3.75" 3.75" Material Clamp Centerline Print Date 01/10/2001 Revision 4.0 Page 10 of 15

11 C Size Track 200 Stations Auto Index Track 200 Station Punch Dead Zone 2.80" Turret 2.1" Confirmation Zone Material Clamp Edge of Material 3.75" 3.75" Material Clamp Centerline Print Date 01/10/2001 Revision 4.0 Page 11 of 15

12 D Size (3½") Station D Size Track 200 Stations Track 200 Station Confirmation Zone 2.9" Turret Punch Dead Zone Material Clamp Edge of Material 6.85" 4.1" 4.1" 6.85" Material Clamp Centerline Print Date 01/10/2001 Revision 4.0 Page 12 of 15

13 Reposition Holddown Locations Left Holddown Right Holddown Track 200 Y 2.0" " Track " Center of Tool Track 300 Reposition Confirmation Zone Track 200 Reposition Confirmation Zone X 2.4" 4.0" Print Date 01/10/2001 Revision 4.0 Page 13 of 15

14 Material Clamp Location 0.400" Material Clamp Centerline Minimum 3.000" 1.575" 1.575" 5.525" Mimimum Spacing Material Clamp Centerline 5.525" Mimimum Spacing Material Clamp Centerline Maximum " Y 0" Edge of Material Material Clamp 1 Clamp Sensor Material Clamp Optional Clamp Sensor Material Clamp Last Clamp Sensor Print Date 01/10/2001 Revision 4.0 Page 14 of 15

15 Turret Layout 31 station 3 A/I Print Date 01/10/2001 Revision 4.0 Page 15 of 15