This document is a preview generated by EVS

Size: px
Start display at page:

Download "This document is a preview generated by EVS"

Transcription

1 EESTI STANDARD EVS-EN :2004 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 1: Global positioning system (GPS) - Receiver equipment - Performance standards, methods of testing and required test results

2 EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN :2004 sisaldab Euroopa standardi EN :2003 ingliskeelset teksti. This Estonian standard EVS-EN :2004 consists of the English text of the European standard EN :2003. Standard on kinnitatud Eesti Standardikeskuse käskkirjaga ja jõustub sellekohase teate avaldamisel EVS Teatajas. Euroopa standardimisorganisatsioonide poolt rahvuslikele liikmetele Euroopa standardi teksti kättesaadavaks tegemise kuupäev on Standard on kättesaadav Eesti standardiorganisatsioonist. This standard is ratified with the order of Estonian Centre for Standardisation dated and is endorsed with the notification published in the official bulletin of the Estonian national standardisation organisation. Date of Availability of the European standard text The standard is available from Estonian standardisation organisation. ICS Võtmesõnad: gnss, gps, performances, receiver equipment, tests Standardite reprodutseerimis- ja levitamisõigus kuulub Eesti Standardikeskusele Andmete paljundamine, taastekitamine, kopeerimine, salvestamine elektroonilisse süsteemi või edastamine ükskõik millises vormis või millisel teel on keelatud ilma Eesti Standardikeskuse poolt antud kirjaliku loata. Kui Teil on küsimusi standardite autorikaitse kohta, palun võtke ühendust Eesti Standardikeskusega: Aru 10 Tallinn Eesti; Telefon: ; E-post:

3 EUROPEAN STANDARD EN NORME EUROPÉENNE EUROPÄISCHE NORM October 2003 ICS Supersedes EN :1996 English version Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS) Part 1: Global positioning system (GPS) Receiver equipment Performance standards, methods of testing and required test results (IEC :2003) Matériels et systèmes de navigation et de radiocommunication maritimes Système mondial de navigation par satellite (GNSS) Partie 1: Système de positionnement par satellite GPS Matériel de réception Normes de fonctionnement, méthodes d'essai et résultats d'essai exigibles (CEI :2003) Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt Weltweite Navigations-Satellitensysteme (GNSS) Teil 1: Weltweites Ortungssystem (GPS) Empfangsanlagen Funktionsanforderungen, Prüfverfahren und geforderte Prüfergebnisse (IEC :2003) This European Standard was approved by CENELEC on CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN :2003 E

4 EN : Foreword The text of document 80/371/FDIS, future edition 2 of IEC , prepared by IEC TC 80, Maritime navigation and radiocommunication equipment and systems, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN on This European Standard supersedes EN :1996. It includes the following technical changes: a) it reflects the changes brought about by IMP adopting GPS as part of the carriage requirement on ships defined in SOLAS Chapter V; b) the new IMO performance standards, resolution MSC.112(73), replaced the previous issue, A.819(19), for new installations on the 1st of July This second edition of N incorporates revised tests for type approvals to the new performance standard; c) changes include the need for a data output to the EN series giving COG SOG and UTC with validity marking, operation during interference conditions and improved failure warnings. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) latest date by which the national standards conflicting with the EN have to be withdrawn (dow) Annexes designated "normative" are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC :2003 was approved by CENELEC as a European Standard without any modification.

5 - 3 - EN :2003 Annex ZA (normative) Normative references to international publications with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 6: Ship environment EN ) 1993 IEC ) Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results EN ) IEC Series Maritime navigation and radiocommunication equipment and systems - Digital interfaces EN Series IMO Resolution A.529(13) 1983 Accuracy standards for navigation - - IMO Resolution A.694(17) 1991 General requirements for shipborne radio equipment forming part of the global maritime distress and safety system (GMDSS) and for electronic navigational aids - - IMO Resolution A.815(19) 1995 Worldwide radionavigation system - - IMO Resolution MSC.112(73) 2000 Performance standards for shipborne global positioning system (GPS) receiver equipment - - 1) EN includes A1:1991 to IEC ) Undated reference. 3) Valid edition at date of issue.

6 EN : Publication Year Title EN/HD Year IMO Resolution MSC.114(73) 2000 Performance standards for shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - - ITU-R Recommendation M ITU-R Recommendation M ITU-R Recommendation M Technical characteristics of differential transmissions for global navigation satellite systems (GNSS) from maritime radio beacons in the frequency band 285 khz khz (283,5 khz khz in Region 1) 1997 Techhnical characteristics of differential transmissions for Global Navigation Satellite Systems from maritime radio beacons in the frequency band khz in Region 1 and khz in Regions 2 and Technical and performance characteristics of current and planned radionavigation-satellite service (spaceto-earth) and aeronautical radionavigation service receivers to be considered in interference studies in the band MHz Global Positioning System Standard Positioning Service Performance Specification (USA Department of Defence)

7 INTERNATIONAL STANDARD IEC Second edition Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS) Part 1: Global positioning system (GPS) Receiver equipment Performance standards, methods of testing and required test results Matériels et systèmes de navigation et de radiocommunication maritimes Système mondial de navigation par satellite (GNSS) Partie 1: Système de positionnement par satellite GPS Matériel de réception Normes de fonctionnement, méthodes d'essai et résultats d'essai exigibles Reference number IEC :2003(E)

8 Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the series. For example, IEC 34-1 is now referred to as IEC Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site ( Catalogue of IEC publications The on-line catalogue on the IEC web site ( enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications ( justpub/jp_entry.htm) is also available by . Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: custserv@iec.ch Tel: Fax:

9 INTERNATIONAL STANDARD IEC Second edition Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS) Part 1: Global positioning system (GPS) Receiver equipment Performance standards, methods of testing and required test results Matériels et systèmes de navigation et de radiocommunication maritimes Système mondial de navigation par satellite (GNSS) Partie 1: Système de positionnement par satellite GPS Matériel de réception Normes de fonctionnement, méthodes d'essai et résultats d'essai exigibles IEC 2003 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: Telefax: inmail@iec.ch Web: Commission Electrotechnique Internationale International Electrotechnical Commission Международная Электротехническая Комиссия PRICE CODE For price, see current catalogue U

10 IEC:2003(E) CONTENTS FOREWORD Scope Normative references Terms, definitions and abbreviations Definitions Abbreviations Minimum performance standards Object GPS receiver equipment Performance standards for GPS receiver equipment Methods of testing and required test results Test sites Test sequence Standard test signals Determination of accuracy Test conditions Methods of test and required test results Typical interference conditions Performance checks under IEC conditions...28 Figure 1 Broadband interference environment...25 Figure 2 CW interference mask...25 Table 1 Acquisition time limits...10 Table 2 Accuracy of COG...14

11 IEC:2003(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS GLOBAL NAVIGATION SATELLITE SYSTEMS (GNSS) Part 1: Global positioning system (GPS) Receiver equipment Performance standards, methods of testing and required test results FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, and Guides (hereafter referred to as IEC Publication(s) ). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC has been prepared by IEC technical committee 80: Maritime navigation and radiocommunication equipment and systems. This second edition cancels and replaces the first edition published in This edition of the IEC standard for GPS, compared to the previous edition, includes the following technical changes: a) it reflects the changes brought about by IMO adopting GPS as part of the carriage requirement on ships defined in SOLAS Chapter V; b) the new IMO performance standard, resolution MSC.112(73), replaced the previous issue, A.819(19), for new installations on the 1st of July This second edition of IEC incorporates revised tests for type approvals to the new performance standard;

12 IEC:2003(E) c) changes include the need for a data output to the IEC series giving COG SOG and UTC with validity marking, operation during interference conditions and improved failure warnings. The text of this standard is based on the following documents: FDIS 80/371/FDIS Report on voting 80/373/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. A bilingual version of this standard may be issued at a later date.

13 IEC:2003(E) 5 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS GLOBAL NAVIGATION SATELLITE SYSTEMS (GNSS) Part 1: Global positioning system (GPS) Receiver equipment Performance standards, methods of testing and required test results 1 Scope This part of IEC specifies the minimum performance standards, methods of testing and required test results for GPS shipborne receiver equipment, based on IMO Resolution MSC.112(73), which uses the signals from the United States of America, Department of Defence (US DOD), Global Positioning System (GPS) in order to determine position. A description of the GPS SPS is given in the normative reference GPS, SPS signal specification USA Department of Defence 3rd Edition October This receiver standard applies to phases of the voyage "other waters" as defined in IMO Resolution A.529(13). All text of this standard, whose meaning is identical to that in IMO Resolution MSC.112(73), is printed in italics and the Resolution and paragraph number indicated between brackets i.e. (M.112/A1.2). The requirements in clause 4 are cross-referenced to the tests in clause 5 and vice versa. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC :1987, Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Ship environment IEC 60945, Maritime navigation and radiocommunication equipment and systems General requirements Methods of testing and required test results IEC (all parts), Maritime navigation and radiocommunication equipment and systems Digital interfaces IMO Resolution A.529(13):1983, Accuracy standards for navigation IMO Resolution A.694(17):1991, General requirements for shipborne radio equipment forming part of the Global maritime distress and safety system (GMDSS) and for electronic navigational aids IMO Resolution A.815(19):1995, Worldwide radionavigation system IMO Resolution MSC.112(73):2000, Performance standards for shipborne global positioning system (GPS) receiver equipment

14 IEC:2003(E) IMO Resolution MSC.114(73):2000, Performance standards for shipborne DGPS and DGLONASS maritime radio beacon receiver equipment ITU-R Recommendation M.823-1:1995, Technical characteristics of differential transmissions for global navigation satellite systems (GNSS) from maritime radio beacons in the frequency band 285 khz-325 khz (283,5 khz-315 khz in Region 1) ITU-R Recommendation M.823-2:1997, Technical characteristics of differential transmissions for Global Navigation Satellite Systems from maritime radio beacons in the frequency band khz in Region 1 and khz in Regions 2 and 3 ITU-R Recommendation M.1477:2000, Technical and performance characteristics of current and planned radionavigation-satellite service (space-to-earth) and aeronautical radionavigation service receivers to be considered in interference studies in the band MHz Global Positioning System Standard Positioning Service Performance Specification USA Department of Defence 3rd Edition October 2001

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 61023:2002 Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements - Methods of testing

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 61108-3:2010 Maritime navigation and radiocommunication equipment and systems - Globalnavigation satellite systems (GNSS) - Part 3: Galileo - Receiver equipment - Performance requirements,

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 60966-2-6:2009 Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz,

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61108-1 Second edition 2003-07 Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS) Part 1: Global positioning system (GPS)

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13888:2009 Grout for tiles - Requirements, evaluation of conformity, classification and designation EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN 13888:2009

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 8015:2011 Toote geomeetrilised spetsifikatsioonid (GPS). Alused. Käsitlusviisid, põhimõtted ja reeglid Geometrical product specifications (GPS) - Fundamentals - Concepts, principles

More information

EESTI STANDARD EVS-EN :2009

EESTI STANDARD EVS-EN :2009 EESTI STANDARD Radio frequency and coaxial cable assemblies -- Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN 60966-3-

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 3098-3:2000 Technical product documentation - Lettering - Part 3: Greek alphabet EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN ISO 3098-3:2000 sisaldab

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 62002-2:2008 Mobile and portable DVB-T/H radio access -- Part 2: Interface conformance testing Mobile and portable DVB-T/H radio access -- Part 2: Interface conformance testing EESTI

More information

EESTI STANDARD EVS-EN :2010

EESTI STANDARD EVS-EN :2010 EESTI STANDARD EVS-EN 60444-11:2010 Measurement of quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonance frequency fl and the effective load capacitance

More information

EESTI STANDARD EVS-EN ISO 28762:2010

EESTI STANDARD EVS-EN ISO 28762:2010 EESTI STANDARD EVS-EN ISO 28762:2010 Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification (ISO 28762:2010) EESTI STANDARDI EESSÕNA Käesolev Eesti standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 62272-2:2007 Digital Radio Mondiale (DRM) -- Part 2: Digital radio in the bands below 30 MHz - Methods of measurement for DRM transmitters Digital Radio Mondiale (DRM) -- Part 2:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD Betoonvalmistooted. Tugiseinaelemendid Precast Concrete Products - Retaining wall elements EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard sisaldab Euroopa standardi EN

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards EESTI STANDARDI EESSÕNA Käesolev

More information

This document is a preview generated by EVS. Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water (ISO 105-E02:2013)

This document is a preview generated by EVS. Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water (ISO 105-E02:2013) EESTI STANDARD EVS-EN ISO 105-E02:2013 Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water (ISO 105-E02:2013) EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN

More information

EESTI STANDARD EVS-EN ISO 286-2:2010

EESTI STANDARD EVS-EN ISO 286-2:2010 EESTI STANDARD EVS-EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15302:2008 Raudteealased rakendused. Meetodid koonilisuse ekvivalendi määramiseks Railway applications - Method for determining the equivalent conicity EESTI STANDARDI EESSÕNA NATIONAL

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15037-2:2009+A1:2011 Betoonvalmistooted. Tala-plokk-vahelaesüsteemid. Osa 2: Betoonblokid Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks EESTI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-ENV 14237:2008 Textiles in the healthcare system EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-ENV 14237:2008 sisaldab Euroopa standardi ENV 14237:2002 ingliskeelset

More information

EESTI STANDARD EVS-EN 62252:2004

EESTI STANDARD EVS-EN 62252:2004 EESTI STANDARD EVS-EN 62252:2004 Maritime navigation and radiocommunication equipment and systems Radar for craft not in compliance with IMO SOLAS Chapter V Performance requirements, methods of test and

More information

EESTI STANDARD EVS-EN :2009

EESTI STANDARD EVS-EN :2009 EESTI STANDARD EVS-EN 15037-2:2009 Betoonvalmistooted. Tala-plokk-vahelaesüsteemid. Osa 2: Betoonblokid Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks EESTI STANDARDI

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61924 First edition 2006-05 Maritime navigation and radiocommunication equipment and systems Integrated navigation systems Operational and performance requirements, methods of

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 60745-2-2:2010 Käeshoitavad mootoriga elektrilised tööriistad. Ohutus. Osa 2-2: Erinõuded kruvikeerajatele ja mutrivõtmetele Hand-held motor-operated electric tools - Safety - Part

More information

EESTI STANDARD EVS-EN :2004. Filters using waveguide type dielectric resonators Part 2: Guidance for use

EESTI STANDARD EVS-EN :2004. Filters using waveguide type dielectric resonators Part 2: Guidance for use EESTI STANDARD EVS-EN 61337-2:2004 Filters using waveguide type dielectric resonators Part 2: Guidance for use EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN 61337-2:2004 sisaldab Euroopa standardi

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD IEC 61108-3 Edition 1.0 2010-05 colour inside Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS) Part 3: Galileo receiver

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 60495:2002 Single sideband power-line carrier terminals EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN 60495:2002 sisaldab Euroopa

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 14583:2002 Hexalobular socket pan head screws Hexalobular socket pan head screws EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1168:2006+A2:2009 Betoonvalmistooted. Õõnespaneelid KONSOLIDEERITUD TEKST Precast concrete products - Hollow core slabs CONSOLIDATED TEXT EESTI STANDARDI EESSÕNA NATIONAL FOREWORD

More information

EESTI STANDARD EVS-EN :1999

EESTI STANDARD EVS-EN :1999 EEST STANDARD EVS-EN 25183-1:1999 Kontaktpunktkeevitus. Elektroodide üleminekupuksid, pistikkoonused 1:10. Osa 1: Kooniline kinnitus, koonus 1:10. Resistance spot welding - Electrode adaptors, male taper

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61996-2 First edition 2006-03 Maritime navigation and radiocommunication equipment and systems Shipborne voyage data recorder (VDR) Part 2: Simplified voyage data recorder (S-VDR)

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 62320-1 First edition 2007-02 Maritime navigation and radiocommunication equipment and systems Automatic identification system (AIS) Part 1: AIS Base Stations Minimum operational

More information

EESTI STANDARD EVS-EN ISO :1999

EESTI STANDARD EVS-EN ISO :1999 EESTI STANDARD EVS-EN ISO 8826-1:1999 Tehnilised joonised. Veerelaagrid. Osa 1: Üldine lihtsustatud kujutamine Technical drawings - Rolling bearings - Part 1: General simplified representation EESTI STANDARDIKESKUS

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 10223-1:2012 Steel wire and wire products for fencing and netting - Part 1: Zinc and zinc-alloy coated steel barbed wire EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 14457:2012 Dentistry - Handpieces and motors (ISO 14457:2012) EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN ISO 14457:2012 sisaldab Euroopa standardi EN

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 62065 First edition 2002-03 Maritime navigation and radiocommunication equipment and systems Track control systems Operational and performance requirements, methods of testing

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 14579:2002 Hexalobular socket head cap screws Hexalobular socket head cap screws EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) EVS-EN ISO 1938-1:2015 EESTI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 61097-1:2007 Global maritime distress and safety system (GMDSS) -- Part 1: Radar transponder - Marine search and rescue (SART) - Operational and performance requirements, methods

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60444-8 First edition 2003-07 Measurement of quartz crystal unit parameters Part 8: Test fixture for surface mounted quartz crystal units Mesure des paramètres des résonateurs

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 62287-1 First edition 2006-03 Maritime navigation and radiocommunication equipment and systems Class B shipborne equipment of the automatic identification system (AIS) Part 1:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1423:2012 Teemärgistusmaterjalid. Pealepuistematerjalid. Klaaskuulid, libisemisvastased materjalid ja nende kahe segud Road marking materials - Drop on materials - Glass beads, antiskid

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 9300-003:2012 Aerospace series - LOTAR - Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 003: Fundamentals and concepts

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 50090-5-3:2016 Home and Building Electronic Systems (HBES) - Part 5-3: Media and media dependent layers - Radio Frequency for HBES Class 1 EVS-EN 50090-5-3:2016 EESTI STANDARDI EESSÕNA

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 61996-1:2013 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 1: Performance requirements, methods of testing and required

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60076-5 Third edition 2006-02 Power transformers Part 5: Ability to withstand short circuit IEC 2006 Copyright - all rights reserved No part of this publication may be reproduced

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60060-3 First edition 2006-02 High-voltage test techniques Part 3: Definitions and requirements for on-site testing IEC 2006 Copyright - all rights reserved No part of this publication

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION IEC TS 61400-14 First edition 2005-03 Wind turbines Part 14: Declaration of apparent sound power level and tonality values Reference number IEC/TS 61400-14:2005(E) Publication numbering

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12839:2012 Betoonvalmistooted. Piirdeaedade elemendid Precast concrete products - Elements for fences EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 12839:2012

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61097-2 Second edition 2002-09 Global maritime distress and safety system (GMDSS) Part 2: COSPAS-SARSAT EPIRB Satellite emergency position indicating radio beacon operating on

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 15748-2:2002 Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation Ships and marine technology - Potable water supply

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 847-1:2013 Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 847-1:2013

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION IEC TS 61400-14 First edition 2005-03 Wind turbines Part 14: Declaration of apparent sound power level and tonality values IEC 2005 Copyright - all rights reserved No part of this

More information

EESTI STANDARD EVS-EN :2011

EESTI STANDARD EVS-EN :2011 EESTI STANDARD EVS-EN 61000-4-21:2011 Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods EESTI STANDARDI EESSÕNA Käesolev Eesti standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14976:2005 Textiles - Mattress ticking - Specifications and test methods Textiles - Mattress ticking - Specifications and test methods EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 11426:2016 Jewellery - Determination of gold in gold jewellery alloys - Cupellation method (fire assay) (ISO 11426:2014) EVS-EN ISO 11426:2016 EESTI STANDARDI EESSÕNA NATIONAL

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12758:2011 Klaas ehituses. Klaasing ja õhuheli isolatsioon. Toote kirjeldused ja omaduste määramine Glass in building - Glazing and airborne sound insulation - Product s and determination

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61097-10 First edition 1999-06 Global maritime distress and safety system (GMDSS) Part 10: Inmarsat-B ship earth station equipment Système mondial de détresse et de sécurité

More information

Insulation co-ordination Part 1: Definitions, principales and rules. IEC 2006 Copyright - all rights reserved

Insulation co-ordination Part 1: Definitions, principales and rules. IEC 2006 Copyright - all rights reserved INTERNATIONAL STANDARD IEC 60071-1 Eight edition 2006-01 Insulation co-ordination Part 1: Definitions, principales and rules IEC 2006 Copyright - all rights reserved No part of this publication may be

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14219:2003 Hexagon bolts with flange with metric fine pitch thread - Small series Hexagon bolts with flange with metric fine pitch thread - Small series EESTI STANDARDIKESKUS EESTI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 898-1:2009 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13847:2001 Coal tar and pitch based binders and related products - Terminology and classification Coal tar and pitch based binders and related products - Terminology and classification

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61097-15 Edition 1.0 2012-05 Global maritime distress and safety system (GMDSS) Part 15: Inmarsat FB500 ship earth station Operational and performance requirements, methods of

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 61935-1:2010 Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in the standards series EN 50173

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60060-3 First edition 2006-02 High-voltage test techniques Part 3: Definitions and requirements for on-site testing Reference number IEC 60060-3:2006(E) Publication numbering

More information

Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles

Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles EESTI STANDARD EVS-EN ISO 5845-1:2000 Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA Käesolev

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61996 First edition 2000-07 Maritime navigation and radiocommunication equipment and systems Matériels et systèmes de navigation et de radiocommunication maritimes Enregistreurs

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD IEC 61883-7 First edition 2003-01 Consumer audio/video equipment Digital interface Part 7: Transmission of ITU-R BO.1294 System B Matériel audio/vidéo grand public Interface numérique

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60214-2 First edition 2004-10 Tap-changers Part 2: Application guide Reference number IEC 60214-2:2004(E) Publication numbering As from 1 January 1997 all IEC publications are

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1943:2003 Self adhesive tapes - Measurement of static shear adhesion Self adhesive tapes - Measurement of static shear adhesion EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 16047:2005 Fasteners - Torque/clamp force testing Fasteners - Torque/clamp force testing EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60748-4-3 First edition 2006-08 Semiconductor devices Integrated circuits Part 4-3: Interface integrated circuits Dynamic criteria for analogue-digital converters (ADC) IEC 2006

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 16315:2014 Textiles - Silk woven fabrics for womenswear, silk squares, scarves and ties - Requirements and test methods EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60068-2-58 Third edition 2004-07 Environmental testing Part 2-58: Tests Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 10223-3:2013 Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes EESTI STANDARDI EESSÕNA NATIONAL FOREWORD

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 622-5:2006 Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) EESTI

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61993-2 First edition 2001-12 Maritime navigation and radiocommunication equipment and systems Automatic identification systems (AIS) Part 2: Class A shipborne equipment of the

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13900-3:2003 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12228:2002 Surfaces for sports areas - Determination of joint strength of synthetic surfaces Surfaces for sports areas - Determination of joint strength of synthetic surfaces EESTI

More information

This is a preview - click here to buy the full publication INTERNATIONAL. Edition 1:1999 consolidated with amendment 1:2002

This is a preview - click here to buy the full publication INTERNATIONAL. Edition 1:1999 consolidated with amendment 1:2002 INTERNATIONAL IEC STANDARD 60936-1 Edition 1.1 2002-08 Edition 1:1999 consolidated with amendment 1:2002 Maritime navigation and radiocommunication equipment and systems Radar Part 1: Shipborne radar Performance

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 4535:2003 Vitreous and procelain enamels - Apparatus for determination of resistance to hot detergent solutions used for washing textiles EESTI STANDARDIKESKUS EESTI STANDARDI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13186:2005 Feather and down - Specification for feather and down filled bedding articles Feather and down - Specification for feather and down filled bedding articles EESTI STANDARDIKESKUS

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61000-4-5 Second edition 2005-11 BASIC EMC PUBLICATION Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques Surge immunity test This English-language

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 17161:2019 Design for All - Accessibility following a Design for All approach in products, goods and services - Extending the range of users EVS-EN 17161:2019 EESTI STANDARDI EESSÕNA

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 60118-4:2015 Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements EVS-EN 60118-4:2015 EESTI STANDARDI EESSÕNA

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1506:2007 Hoonete ventilatsioon Ümmarguse ristlõikega lehtmetallist õhutorud ja fitingud Mõõtmed Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section

More information

Construction drawings - Spaces for drawing and for text, and title blocks on drawing sheets

Construction drawings - Spaces for drawing and for text, and title blocks on drawing sheets EESTI STANDARD EVS-EN ISO 9431:2000 Construction drawings - Spaces for drawing and for text, and title blocks on drawing sheets EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN

More information

INTERNATIONAL. Medical device software Software life cycle processes

INTERNATIONAL. Medical device software Software life cycle processes INTERNATIONAL STANDARD IEC 62304 First edition 2006-05 Medical device software Software life cycle processes This English-language version is derived from the original bilingual publication by leaving

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 10244-4:2001 Steel wire and wire products - Nonferrous metallic coatings on steel wire - Part 4: Tin coatings Steel wire and wire products - Non-ferrous metallic coatings on steel

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 61580-6:2013 Methods of measurement for waveguides -- Part 6: Return loss on waveguide and waveguide assemblies EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1505:2001 Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions Ventilation for buildings - Sheet metal air ducts and fittings

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 55025:2008 Sõidukid, paadid ja sisepõlemismootorid. Raadiohäiringute tunnussuurused. Pardavastuvõtjate kaitse mõõtemeetodid ja - piirangud Vehicles, boats and internal combustion

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60958-4 Second edition 2003-05 Digital audio interface Part 4: Professional applications (TA4) Interface audionumérique Partie 4: Applications professionnelles (TA4) Reference

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60826 Third edition 2003-10 Design criteria of overhead transmission lines This English-language version is derived from the original bilingual publication by leaving out all

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60601-1-6 First edition 2004-06 Medical electrical equipment Part 1-6: General requirements for safety Collateral standard: Usability This English-language version is derived

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 50065-2-2:2003 Madalpinge-elektripaigaldistel olev signalisatsioon sagedusalal 3 khz kuni 148,5 khz. Osa 2-2: Häiringukindluse nõuded sagedusalal 95 khz kuni 148,5 khz töötavatele

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 61000-4-6:2014 Electromagnetic compatibility (EMC) -- Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields EESTI STANDARDI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 61029-2-11:2012 Teisaldatavate mootorajamiga elektritööriistade ohutus. Osa 2-11: Erinõuded kombineeritud järkamis- ja lauasaagidele Safety of transportable motor-operated electric

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 19901-7:2013 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14399-3:2005 High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies High-strength structural bolting assemblies for preloading

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60076-7 First edition 2005-12 Power transformers Part 7: Loading guide for oil-immersed power transformers IEC 2005 Copyright - all rights reserved No part of this publication

More information