RF and Microwave Components

Transcription

1 RF and Microwave Components Short form Edition 2011/2012

2 Be precise

3 Your partner for system solutions The Group is a leading global supplier of components and systems for electrical and optical connectivity. Our customers in Communications, Industrial and Transportation markets appreciate that we are specialists with detailed knowledge of practical applications. We offer technical expertise in radio frequency technology, fiber optics and low frequency under one roof, thus providing a unique basis for continual innovation focused on the needs of our customers all over the world. RF and microwave components s extensive range of high-quality components are matched to the various needs in the field of test and measurement. All these products are distinguished by their high performance and stable the result of years of experience in the development and production of radio frequency components. This short form catalogue presents you an extract of the wide range of components. If you have a specific need and do not see it in this catalogue, please contact your representative for assistance. Excellence in Connectivity Solutions

4

5 Table of Content Coaxial attenuators Low, medium and high power s up to 300 Watts 7 Terminations Low, medium and high power s up to 100 Watts 19 Special products A range of components used for your measurement equipment 29 Online product search 36 Excellence in Connectivity Solutions

6

7 Coaxial Attenuators Low, medium and high power Product description 8 Low power attenuators, up to 2 Watts BNC 9 N 10 PC PC7 11 QMA 11 SK 12 SMA 12 TNC 13 Medium power attenuators, up to 50 Watts N 14 SMA 15 DIN 7/16 15 High power attenuators, up to 300 Watts N 16 SMA 16 DIN 7/16 17 For detailed product information see how to search online on pages 36 and 37. 7

8 Product Description RF attenuators are used to reduce the input power. They are used in many test+measurement and communication applications (e.g. as fine power adjuster between different channels or as a protection for the input of the network analyzer). Features and benefits Broadband Wide selection of interfaces and attenuation values According IEC/MIL/CECC interface standard High repeatability Attenuators quick selection chart BNC 75 N 75 BNC DIN 7/16 TNC N QMA PC7 SMA SMA-23 SK PC High, up to 300W Medium, up to 50W Low, up to 2W Product details Specification sheets and outline drawings are available on request or on our website hubersuhner.com. handling capability The referenced average power is applicable at 25 C ambient temperature. For higher ambient temperature a certain power derating may be required. Please see detailed product specification. Medium and high power products must be mounted in such a way that free air convection around heat sink is given to assure performance. 8 For detailed product information see how to search online on pages 36 and 37.

9 Low Attenuators, up to 2 Watts BNC, 50 Ω, connector configuration male to female DC to * 1 Watt power rating Nom. attenuation (db) A A A A A* A* A* BNC, 75 Ω, connector configuration male to female DC to Nom. attenuation (db) A A A A A For detailed product information see how to search online on pages 36 and 37. 9

10 Low Attenuators, up to 2 Watts N, 50 Ω, connector configuration male to female DC to Nom. attenuation (db) _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N A A A A A A A A A A* A* A* B B B* B* B* * 1 Watt power rating N, 75 Ω, connector configuration male to female DC to Nom. attenuation (db) A A A A A For detailed product information see how to search online on pages 36 and 37.

11 Low Attenuators, up to 2 Watts PC2.4, 50 Ω, connector configuration male to female DC to Nom. attenuation (db) _PC _PC _PC _PC _PC PC7, 50 Ω, connector configuration male to female DC to Nom. attenuation (db) A A A A A QMA, 50 Ω, connector configuration male to female DC to Nom. attenuation (db) _QMA _QMA _QMA _QMA _QMA _QMA _QMA _QMA _QMA _QMA _QMA _QMA _QMA For detailed product information see how to search online on pages 36 and

12 Low Attenuators, up to 2 Watts SK, 50 Ω, connector configuration male to female DC to Nom. attenuation (db) _SK _SK _SK _SK SMA, 50 Ω, connector configuration male to female DC to Nom. attenuation (db) 1) Special body with gold plating and without epoxy captivation for better EMC shielding _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA A 1) A 1) A 1) A 1) A 1) A 1) A 1) A 1) A 1) A 1) A 1) A 1) ) 12 For detailed product information see how to search online on pages 36 and 37.

13 Low Attenuators, up to 2 Watts SMA, 50 Ω, connector configuration male to female DC to Nom. attenuation (db) _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA TNC, 50 Ω, connector configuration male to female DC to Nom. attenuation (db) A A A A A For detailed product information see how to search online on pages 36 and

14 Medium Attenuators, up to 50 Watts N, 50 Ω, connector configuration male to female DC to Nom. attenuation (db) _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N * _N * _N * * Unidirectional unit, input port is the male connector. 14 For detailed product information see how to search online on pages 36 and 37.

15 Medium Attenuators, up to 50 Watts SMA, 50 Ω, connector configuration male to female DC to Nom. attenuation (db) _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA _SMA * _SMA * _SMA * * Unidirectional unit, input port is the male connector. DIN 7/16, 50 Ω, connector configuration male to female DC to Nom. attenuation (db) _ _ _ _ _ _ _ * _ * _ * * Unidirectional unit, input port is the male connector. For detailed product information see how to search online on pages 36 and

16 High Attenuators, up to 300 Watts N, 50 Ω, connector configuration male to female DC to Nom. attenuation (db) _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N _N All units are unidirectional, input port is the male connector. SMA, 50 Ω, connector configuration male to female DC to All units are unidirectional, input port is the male connector. Nom. attenuation (db) _SMA _SMA _SMA _SMA _SMA For detailed product information see how to search online on pages 36 and 37.

17 High Attenuators, up to 300 Watts DIN 7/16, 50 Ω, connector configuration male to female DC to All units are unidirectional, input port is the male connector. Nom. attenuation (db) _ _ _ _ _ _ For detailed product information see how to search online on pages 36 and

18

19 Coaxial Terminations Low, medium and high power Product description 20 Low power terminations, up to 2 Watts BNC 21 BMA 21 C 21 MCX 21 MMCX 22 N 22 PC PC7 22 QLA 22 QMA 23 QN 23 SK 23 SMA 23 SMB 23 SMC 23 SMPX 23 TNC 24 DIN 7/16 24 Medium power terminations, up to 60 Watts BNC 25 N 25 SMA 26 TNC 26 DIN 7/16 26 High power terminations, up to 100 Watts SMA 27 For detailed product information see how to search online on pages 36 and

20 Product Description Terminations are used to close an open RF port. They are applied in a large variety of test+measurement, defence and communication applications. Features and benefits Broadband Low and medium power Low High repeatability Termination quick selection chart BNC 75 N 75 QLA C 1023 MCX 75 MMCX MCX SMB SMC QN QMA BNC DIN 7/16 TNC SMPX-U SMA PC7 N BMA SK PC Low, up to 2W Medium, up to 60W High, up to 100W Product details Specification sheets and outline drawings are available on request or on our website hubersuhner.com. handling capability The referenced average power is applicable at 25 C ambient temperature. For higher ambient temperature a certain power derating may be required. Please see detailed product specification. Medium and high power products must be mounted in such a way that free air convection around heat sink is given to assure performance. 20 For detailed product information see how to search online on pages 36 and 37.

21 Low Terminations, up to 2 Watts BNC, 50 and 75 Ω Ω male 65_BNC Ω male 1) 65_BNC Ω female 1) 65_BNC Ω male Ω female Ω male 65_BNC Ω male 65_BNC Ω female 65_BNC ) Products with chain. BMA, 50 Ω female 65_BMA female 65_BMA C, 50 Ω male 65_C MCX, 50 and 75 Ω ) Kit 73_Z ) Kit 73_Z Ω male 65_MCX Ω female 65_MCX Ω male 65_MCX ) Ω female 65_MCX ) Ω male 65_MCX Ω female 65_MCX Ω female 65_MCX ) Ω male 65_MCX ) For detailed product information see how to search online on pages 36 and

22 Low Terminations, up to 2 Watts MMCX, 50 Ω ) Kit 73_Z male 65_MMCX female 65_MMCX female 65_MMCX ) male 65_MMCX ) N, 50 and 75 Ω N 50 Ω male 1) 65_N N 50 Ω male 65_N N 50 Ω male 65002_N N 50 Ω male 65_N N 50 Ω female 65_N N 50 Ω male 65_N N 50 Ω male 65_N N 50 Ω male 6500_N N 50 Ω female 6500_N N 50 Ω female B N 50 Ω male A N 75 Ω male 65_N ) Products with chain. PC2.4, 50 Ω male 6500_PC PC7, 50 Ω PC A QLA, 50 Ω male 65_QLA For detailed product information see how to search online on pages 36 and 37.

23 Low Terminations, up to 2 Watts QMA, 50 Ω male 65_QMA ) male 65_QMA female 65_QMA male watertight 65_QMA-W ) Products with chain. QN, 50 Ω male 65_QN SK, 50 Ω male SMA, 50 Ω female 65_SMA male 65_SMA male 65_SMA ) male A female B female 65_SMA male 65_SMA ) Products with chain. SMB, 50 Ω male 65_SMB female 65_SMB SMC, 50 Ω female 65_SMC male 65_SMC For detailed product information see how to search online on pages 36 and

24 Low Terminations, up to 2 Watts TNC, 50 and 75 Ω Ω female 65_TNC Ω male 1) 65_TNC Ω male 65_TNC Ω female Ω male Ω male 65_TNC Ω female 65_TNC ) Product with chain. DIN 7/16, 50 Ω male 65_ female B male A male 65_ female 65_ For detailed product information see how to search online on pages 36 and 37.

25 Medium Terminations, up to 60 Watts BNC, 50 Ω female B male A male A N, 50 Ω male female B male A male 65010_N female 65010_N male 65010_N female 65010_N female B male A male AB female BB male AA female BA male 65025_N /25* male AB female BB male AA female BA male AB female BB male AA female BA * 50 Watt, if the termination is mounted on an additional heat sink with a thermal resistance (R th ) of 5 K/Watt. Without additional heat sink this termination is applicable up to 25 Watts only. For detailed product information see how to search online on pages 36 and

26 Medium Terminations, up to 60 Watts SMA, 50 Ω male 65_SMA male 65005_SMA male male 1) 65006_SMA male A female B male 65010_SMA male AB male AA female BA male 65050_SMA male A female B ) Product with holes for lock wire. TNC, 50 Ω 6 DC to 1) Product with holes for lock wire. no male male A DIN 7/16, 50 Ω DC to no male A female B male 65010_ male A female B male AB female BB male AA /25* male AB female BB male AB female BB male AA female BA * 50 Watt, if the termination is mounted on an additional heat sink with a thermal resistance (R th ) of 5 K/Watt. Without additional heat sink this termination is applicable up to 25 Watts only. 26 For detailed product information see how to search online on pages 36 and 37.

27 High Terminations, up to 100 Watts SMA, 50 Ω male 65100_SMA For detailed product information see how to search online on pages 36 and

28

29 Special Products Feed through terminations 30 DC blocks 30 Impedance matching pads 31 Resistive power dividers 31 MCX and MMCX test kits 32 Low passive intermodulation load 33 Low passive intermodulation adapters 34 Passive intermodulation standards 35 29

30 Feed Through Terminations Feed through terminations are designed to connect 50 Ω transmission lines or RF devices with a high impdance test equipment e.g. oscilloscope. Features and benefits Allows high input impedance RF measurement 50 Ω, connector configuration male to female DC to (Watt) BNC A BNC B N A DC Blocks A DC block separates or blocks DC voltage (galvanic isolation) and let pass RF frequency along a coaxial transmission line. Features and benefits Broadband RF signal passes with negligible loss Blocking of DC Galvanik isolation of centre conductor 50 Ω, connector configuration male to female Voltage (V) Block Return loss min. (db) BNC centre conductor A N centre conductor A SMA centre conductor Detailed product specifications and outline drawings are available on request. 30

31 Impedance Matching Pads Matching pads are designed to match 50 Ω with 75 Ω impedance of two different transmission lines of while preserving signal integrity. Features and benefits Low insertion loss High repeatability Low return loss 50 Ω with 75 Ω at 50 Ω (W) BNC: 50(m)-75(f) A BNC: 50(f)-75(m) B N: 50(f)-75(m) B N: 50(m)-75(f) A N 50(m)-BNC 75(f) N 50(f)-BNC 75(m) m: refers to male, f: refers to female Resistive Dividers dividers are designed to split a RF signal equally into two output signals with an insertion loss of 6 db. Features and benefits Broadband down to DC Very low return loss Cost effective solution to tap off a signal Very compact 50 Ω (W) BNC (f-f-f) A BNC (m-f-f) B N (f-f-f) A N (m-f-f) B TNC (f-f-f) A TNC (m-f-f) B SMA (f-f-f) A m: refers to male, f: refers to female Detailed product specifications and outline drawings are available on request. 31

32 MCX and MMCX Test Kits Cost effective test kit solution for measurement of MCX or MMCX device under test without using adapter and without an expensive open, short, load calibration kit. The method is in particularly best suitable for snap-on interfaces. Features and benefits Cost effective solution Better repeatability SSL (Short, Short, Load) calibration method allows same measurement feature as the OSLT (Open, Short, Load, Through) calibration but narrow banded Coefficient floppy disk available on request MCX 50 Ω _Z MCX 75 Ω _Z MMCX 50 Ω _Z Test kit contents 2 short (male, female) 2 offset-short (male, female) 2 high end terminations, 3.5 GHz (male, female) Detailed product specifications and outline drawings are available on request. 32

33 Low passive Intermodulation Load offers high performance intermodulation loads for test+measurement and radio base station applications. They are primarily used to close open ports in IM sensitive applications such as an open port of a hybrid coupler. These intermodulation loads are made by using high performance cable and connectors, especially developed for IM sensitive applications and are assembled by highly trained staff to obtain the best IM and results. Features and benefits High repeatability Outstanding IM (better than 160 dbc) Other power levels and customised designs available on request Currently offers these terminations as three standard s Low intermodulation load, 50 Ω (W) 3rd order intermodulation* (dbc) DIN 7/16 female * at 2 x 43 dbm / 2 x 20 W carrier Detailed product specifications and outline drawings are available on request or on our website hubersuhner.com. 33

34 Low passive Intermodulation Adapters These low intermodulation adapters have been specially developed for applications in intermodulation test set-ups. They are made of non-magnetic materials using a minimum number of piece parts to minimize intermodulation sources. Features Outstanding intermodulation performance Non magnetic materials Excellent electrical contacts Benefit Reliable and repeatable intermodulation measurements Intermodulation adpaters, 50 Ω 3rd order 1 2 intermodulation* (dbc) 7/16 female 7/16 female _ /133_WE N female 7/16 female _N /133_WE PC3.5 female 7/16 female _PC /133_WE QN female 7/16 female _QN /113_WE TNC female 7/16 female _TNC /133_WE /16 male 7/16 male _ /133_WE N male 7/16 male _N /133_WE QN male 7/16 male _QN /113_WE TNC male 7/16 male _TNC /133_WE /16 male 7/16 female _ /133_WE /16 male N female _716-N-50-3/133_WE /16 male PC3.5 female _716-PC /133_WE /16 male QN female _716-QN-50-1/113_WE /16 male TNC female _716-TNC-50-1/133_WE N male 7/16 female _N /133_WE QN male 7/16 female _QN /113_WE * at 2 x 43 dbm / 2 x 20 W carrier Detailed product specifications and outline drawings are available on request or on our website hubersuhner.com. 34

35 Passive Intermodulation Standards Intermodulation standards are special 7/16 adapters which deliberately produce intermodulation (+/ 3dBm). They are used to quick-check intermodulation test benches. If the value displayed by the test bench does not correspond with the specified intermodulation standard value, it indicates uncertain measurement performance of your equipment. Features and benefits High repeatability Each item delivered with measurement protocol Verification traceability via serial number DIN 7/16, 50 Ω, connector configuration male to female band (MHz) 3rd order intermodulation (dbm)* _ /133_WE _ /133_WE _ /133_WE _ /133_WE _ /133_WE _ /133_WE _ /133_WE * at 2 x 43 dbm / 2 x 20 W carrier Detailed product specifications and outline drawings are available on request or on our website hubersuhner.com. 35

36 Product Search Search for detailed product information in our online data base via the home page of. Enter the URL: There are several ways to achieve a serach result: Specific serach via the complete code or the item number Generic search via initial characters of the code Lets assume we search for detailed information about the standard attenuator, low power with code 6603_SMA Step one: Select from the pulldown menue in the RF product serarch Search for. Step two: Enter the initial characters 6603 and press return to go. 36

37 Product Search The search result shows all products with code beginning with Step three: Find the 6603_SMA-50-2 in the list and click on the picture to call for the product information... and...the new pages shows all online data of that. 37

38 Wherever you are our Subsidiaries worldwide AustraliA (Australia) Pty Ltd Unit 6, 4 Skyline Place Frenchs Forest AU-Sydney NSW 2086 Tel. +61 (0) Fax +61 (0) info.au@hubersuhner.com AustriA GmbH Zweigniederlassung Am Concorde Park 1/B6/Top 103 AT-2320 Schwechat Tel. +43 (0) Fax +43 (0) info.de@hubersuhner.com Brasil América Latina Ltda Av. Rui Barbosa, 3613 Alto da Ponte BR São José dos Campos-SP Tel Fax info.br@hubersuhner.com China (Hong Kong) Ltd Unit 1101 & 1121, Level 11, Tower 1 Grand Central Plaza No. 138 Shatin Ruralo Committee Road Shatin, N.T., HK-Hong Kong Tel Fax info.hk@hubersuhner.com (Shanghai) Co., Ltd Part B 2-3, 2/F 333 Fu Te Xi Yi Road Waigaoqiao CN-Shanghai , P.R. China Tel. +86 (0) Fax +86 (0) infoshanghai@hubersuhner.com (Shanghai) Transmission & Communication Manufacture Co., Ltd 1330, Jin Hu Road Jin Qiao, Pu Dong New District CN-Shanghai , P.R. China Tel. +86 (0) Fax +86 (0) infoshanghai@hubersuhner.com Denmark A/S Kirke Vaerløsevej 14 DK-3500 Vaerløse Tel Fax info@hubersuhner.dk France France SAS 21 E, rue Jacques-Cartier FR Voisins-le-Bretonneux Tel. +33 (0) Fax +33 (0) info.fr@hubersuhner.com germany GmbH Mehlbeerenstr. 6 DE Taufkirchen Tel. +49 (0) Fax +49 (0) info.de@hubersuhner.com India Electronics Private Limited 682, Udyog Vihar, Phase V IN-Gurgaon , Haryana Tel. +91 (0) /200 Fax +91 (0) info.in@hubersuhner.com Malaysia (Malaysia) Sdn. Bhd. No. 2, Jalan Pensyarah U1/28 HICOM Glenmarie Industrial Park Shah Alam MY-Selangor Tel Fax info.my@hubersuhner.com Poland Sp. z o.o. Ul. Baldowska 26 PL Tczew Tel Fax info.pl@hubersuhner.com Russia AG Representative office in Russia 1 13/1 Leminsky prospect, Office C Moscow, Russia Tel Fax info.pl@hubersuhner.com Singapore (Singapore) Pte Ltd 11 Chang Charn Road #05-02 Shriro House SG-Singapore Tel Fax info.sg@hubersuhner.com Sweden AB Knarrarnäsgatan 7 Box 1247 SE Kista Tel. +46 (0) Fax +46 (0) info.se@hubersuhner.com switzerland AG CH-9100 Herisau Tel. +41 (0) Fax +41 (0) info@hubersuhner.com AG CH-8330 Pfäffikon ZH Tel. +41 (0) Fax +41 (0) info@hubersuhner.com Thailand (Thailand) Co., Ltd. 896/3 SV City Office Tower 1 4th Floor, Rama III Road Kwaeng Bangpongpang Khet Yannawa TH-Bangkok Tel. +66 (0) Fax +66 (0) info.th@hubersuhner.com UNITED Arab emirates Middle East Trading LLC Dubai Investments Park Green Community European Business Center, Office 156 P.O. Box Dubai (United Arab Emirates) Tel Fax info.me@hubersuhner.com UNITED KINGDOM (UK) Limited Telford Road GB-Bicester Oxfordshire OX26 4LA Tel. +44 (0) Fax +44 (0) info.uk@hubersuhner.com USA, Inc. 19 Thompson Drive US-Essex Jct. VT Tel Fax info.na@hubersuhner.com For agents and representatives please contact hubersuhner.com Detailed product specifications and outline drawings are available on request or on our website hubersuhner.com. 38

39 edition 2011 Further catalogues Antennas broadband wireless WiFi Test+Measurement Industrial WiFi Broadband wireless Antennas Rev.A Microwave cables and assemblies Railway products

40 is certified according to ISO 9001, ISO 14001, ISO/TS and IRIS. WAIVER It is exclusively in written agreements that we provide our customers with warrants and representations as to the technical specifications and/or the fitness for any particular purpose. The facts and figures contained herein are carefully compiled to the best of our knowledge, but they are intended for general informational purposes only. AG Radio Division Degersheimerstrasse Herisau/Switzerland Tel. +41 (71) Fax +41 (71) Rev.A/ hubersuhner.com