A78XX. AiT Semiconductor Inc. ORDERING INFORMATION
|
|
|
- Jack Gregory
- 5 years ago
- Views:
Transcription
1 THREE-TERMINAL POSITIVE VOLTAGE REGULATOR DESCRIPTION The series of three-terminal positive regulator are available with several fixed output voltages, making them useful in a wide range of applications. Each type employs internal current limiting, thermal shut down and safe operating area protection, making it essentially indestructible. If FEATURES Output Current up to 1A Thermal Overload Protection Short Circuit Protection Output Transistor Safe Operating Area Protection Available in TO and TO-252 Packages adequate heat sinking is provided, they can deliver over 1A output current. Although designed primarily as fixed voltage regulators, these devices can be ORDERING INFORMATION used with external components to obtain adjustable voltages and currents. Package Type Part Number The is available in TO and TO-252 packages. TO T3 SPQ T3U T3VU 500pcs/TUBE TO-252 D DR DVR SPQ 2,500pcs/Reel XX: Output Voltage Note U: Tube 05=5V; 12=12V V: Halogen free Package AiT provides all RoHS products Suffix V means Halogen free Package REV1.2 - MAY 2012 RELEASED, JAN 2014 UPDATED
2 THREE-TERMINAL POSITIVE VOLTAGE REGULATOR PIN DESCRIPTION Top View Top View Pin # Symbol Function 1 VIN Input 2 GND Ground 3 VOUT Output REV1.2 - MAY 2012 RELEASED, JAN 2014 UPDATED
3 THREE-TERMINAL POSITIVE VOLTAGE REGULATOR ABSOLUTE MAXIMUM RATINGS VIN, Input Voltage RθJC, Thermal Resistance Junction-Case RθJA, Thermal Resistance Junction-Air TOPR, Operating Temperature Range TO-220 TO-252 TO-220 TO-252 TO-220 TO V 5 C/W 10 /W 65 C/W 93 /W -20 C~+85 C -40 ~+85 TSTG, Storage Temperature Range -55 C~+150 C Stress beyond above listed Absolute Maximum Ratings may lead permanent damage to the device. These are stress ratings only and operations of the device at these or any other conditions beyond those indicated in the operational sections of the specifications are not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. REV1.2 - MAY 2012 RELEASED, JAN 2014 UPDATED
4 THREE-TERMINAL POSITIVE VOLTAGE REGULATOR ELECTRICAL CHARACTERISTICS A7805 VI=10V, IO=500mA, -40 <TJ<85, C1=0.33μF, CO=0.1μF, unless otherwise noted Parameter Symbol Conditions Min. Typ. Max. Unit TJ=+25 C Output Voltage VO 5.0mA IO 1.0A, PO 15W VI=7V to 20V V Lin e Regulation NOTE1 Regline TJ=+25 C Lo ad Regulation NOTE1 Regload TJ=+25 C VI=7V to 25V VI=8V to 12V 2 50 IO=5.0mA to 1A IO=250mA to 750mA mv mv Quiescent Current IQ TJ=+25 C ma Quiescent Current Change Δ IQ IO=5.0mA to 1.0A VI=8V to 25V ma Output Noise Voltage VN f=10hz to 100KHz,TA=+25 C μv/vo Ripple Reject ion RR f=120hz VI=8V to 18V db Dropout Voltage VDROP IO=1A, TJ=+25 C 2 V Short Circuit Current ISC VI=35V, TA=+25 C 230 ma Peak Current IPK TJ=+25 C 1.6 A NOTE1: Bypass capacitor s are recommended for optimum stability and transient response and should be located as close as Possible to the regulators. REV1.2 - MAY 2012 RELEASED, JAN 2014 UPDATED
5 A7806 refer to the test circuit, -20 C<TJ<85 C, IO=500mA, VI=11V, CI=0.33µF, CO=0.1µF, unless otherwise specified Parameter Symbol Conditions Min. Typ. Max. Unit TJ=+25 C Output Voltage VO 5.0mA IO 1.0A, PO 15W VI =8V to 21V V Line Regulation NOTE1 Regline TJ=+25 C Load Regulation NOTE1 Regload TJ=+25 C VI=8V to 25V VI=9V to 13V IO=5.0mA to 1.5A IO=250mA to 750mA 3 60 mv Quiescent Current IQ TJ=+25 C ma Quiescent Current Change ΔIQ IO=5.0mA to 1.0A 0.5 VI= 8V to 25V 1.3 ma Output Voltage Drift ΔVO /ΔT IO=5.0mA -0.8 mv/ C Output Noise Voltage VN f=10hz to 100KHz,TA=+25 C 45 µv/vo Ripple Rejection RR f=120hz,vi=9v to 19V db Dropout Voltage VDROP Io=1A,TJ=+25 C 2 V Short Circuit Current ISC VI=35V,TA=+25 C 250 ma Peak Current IPK TJ=+25 C 2.2 A NOTE1: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. REV1.2 - MAY 2012 RELEASED, JAN 2013 UPDATED
6 A7808 refer to the test circuit, -20 C<TJ<85 C, IO=500mA, VI=14V, CI=0.33µF, CO=0.1µF, unless otherwise specified Parameter Symbol Conditions Min. Typ. Max. Unit TJ=+25 C Output Voltage VO 5.0mA IO 1.0A, PO 15W VI =10.5V to 23V V Line Regulation NOTE1 Regline TJ=+25 C Lo ad Regulation NOTE1 Regload TJ=+25 C VI=10.5 V to 25V VI=11.5 V to 17V Io=5.0mA to 1.5A Io=250mA to 750mA mv Quiescent Current IQ TJ=+25 C ma Quiescent Current Change ΔIQ IO=5.0mA to 1.0A VI=10.5V to 25V ma Output Voltage Drift ΔVO /ΔT IO=5.0mA -0.8 mv/ C Output Noise Voltage VN f=10hz to 100KHz,TA=+25 C 52 μv/vo Ripple Rejection RR f=120hz VI=11.5V to 21.5V db Dropout Voltage VDROP IO=1A, TJ=+25 C 2 V Short Circuit Current ISC VI=35V, TA=+25 C 230 ma Peak Current IPK TJ=+25 C 2.2 A NOTE1: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. REV1.2 - MAY 2012 RELEASED, JAN 2013 UPDATED
7 A7809 refer to the test circuit, -20 C<TJ<85 C, IO=500mA, VI=15V, CI=0.33µF, CO=0.1µF, unless otherwise specified Parameter Symbol Conditions Min. Typ. Max. Unit TJ=+25 C Output Voltage VO 5.0mA IO 1.0A, PO 15W VI =11.5V t o 26V V Line Regulation NOTE1 Regline TJ=+25 C Lo ad Regulation NOTE1 Regload TJ=+25 C VI=11.5 V to 26V VI=12.5 V to 18V Io=5.0mA to 1.5A Io=250mA to 750mA mv Quiescent Current IQ TJ=+25 C ma Quiescent Current Change ΔIQ IO=5.0mA to 1.0A VI=11.5V to 26V ma Output Voltage Drift ΔVO /ΔT IO=5.0mA -0.8 mv/ C Output Noise Voltage VN f=10hz to 100KHz,TA=+25 C 52 μv/vo Ripple Rejection RR f=120hz VI=11.5V to 21.5V db Dropout Voltage VDROP IO=1A, TJ=+25 C 2 V Short Circuit Current ISC VI=35V, TA=+25 C 230 ma Peak Current IPK TJ=+25 C 2.2 A NOTE1: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. REV1.2 - MAY 2012 RELEASED, JAN 2013 UPDATED
8 A7812 refer to the test circuit, -20 C<TJ<85 C, IO=500mA, VI=19V, CI=0.33µF, CO=0.1µF, unless otherwise specified Parameter Symbol Conditions Min. Typ. Max. Unit TJ=+25 C Output Voltage VO 5.0mA IO 1.0A, PO 15W VI =14.5V t o 27V V Line Regulation NOTE1 Regline TJ=+25 C Lo ad Regulation NOTE1 Regload TJ=+25 C VI=14.5V to 30V VI=16V to 22V Io=5.0mA to 1.5A Io=250mA to 750mA mv Quiescent Current IQ TJ=+25 C ma Quiescent Current Change ΔIQ IO=5.0mA to 1.0A VI=14.5V to 30V ma Output Voltage Drift ΔVO /ΔT IO=5.0mA -1 mv/ C Output Noise Voltage VN f=10hz to 100KHz,TA=+25 C 76 μv/vo Ripple Rejection RR f=120hz,vi=15v to 25V db Dropout Voltage VDROP IO=1A, TJ=+25 C 2 V Short Circuit Current ISC VI=35V, TA=+25 C 230 ma Peak Current IPK TJ=+25 C 2.2 A NOTE1: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. REV1.2 - MAY 2012 RELEASED, JAN 2013 UPDATED
9 A7815 refer to the test circuit, -20 C<TJ<85 C, IO=500mA, VI=23V, CI=0.33µF, CO=0.1µF, unless otherwise specified Parameter Symbol Conditions Min. Typ. Max. Unit TJ=+25 C Output Voltage VO 5.0mA IO 1.0A, PO 15W VI =17.5V t o 30V V Line Regulation NOTE1 Regline TJ=+25 C Lo ad Regulation NOTE1 Regload TJ=+25 C VI=17.5V to 30V VI=20V to 26V Io=5.0mA to 1.5A Io=250mA to 750mA mv Quiescent Current IQ TJ=+25 C ma Quiescent Current Change ΔIQ IO=5.0mA to 1.0A 0.5 VI=1 7.5V to 30V 1.0 ma Output Voltage Drift ΔVO/ΔT IO=5.0mA -1 mv/ C Output Noise Voltage VN f=10hz to 100KHz,TA=+25 C 90 μv/vo Ripple Rejection RR f=120hz VI=18.5V to 28.5V db Dropout Voltage VDROP IO=1A, TJ=+25 C 2 V Short Circuit Current ISC VI=35V, TA=+25 C 250 ma Peak Current IPK TJ=+25 C 2.2 A NOTE1: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is use REV1.2 - MAY 2012 RELEASED, JAN 2013 UPDATED
10 TYPICAL PERFORMANCE CHARACTERISTICS 1. Quiescent Current 2. Peak Output Current 3. Output Voltage 4. Quiescent Current REV1.2 - MAY 2012 RELEASED, JAN 2013 UPDATED
11 TEST CIRCUIT 1. DC Parameters 2. Load Regulation 3. Ripple Rejection 4. Fixed Output Regulator 5. Constant Current Regulator 6. Circuit for Increasing Output Voltage REV1.2 - MAY 2012 RELEASED, JAN 2013 UPDATED
12 7. Adjustable Output Regulator(7 to 30V) 8. High Current Voltage Regulator 9. High Output Current with Short Circuit Protection 10. Tracking Voltage Regulator 11. Negative Output Voltage Circuit Tracking 12. Switching Regulator Voltage Regulator NOTE2: To specify an output voltage. substitute voltage value for "XX."A common ground is required between the input and the Output voltage. The input voltage must remain typically 2.0V above the output voltage even during the low point on the input ripple voltage. NOTE3: CI is required if regulator is located an appreciable distance from power Supply filter. NOTE4: CO improves stability and transient response. REV1.2 - MAY 2012 RELEASED, JAN 2013 UPDATED
13 BLOCK DIAGRAM REV1.2 - MAY 2012 RELEASED, JAN 2013 UPDATED
14 PACKAGE INFORMATION Dimension in TO (Unit: mm) REV1.2 - MAY 2012 RELEASED, JAN 2013 UPDATED
15 Dimension in TO (Unit: mm) Symbol Min Max A A B b b c c D D E e TYP. e L L L V REF. REV1.2 - MAY 2012 RELEASED, JAN 2013 UPDATED
16 IMPORTANT NOTICE AiT Semiconductor Inc. (AiT) reserves the right to make changes to any its product, specifications, to discontinue any integrated circuit product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. AiT Semiconductor Inc.'s integrated circuit products are not designed, intended, authorized, or warranted to be suitable for use in life support applications, devices or systems or other critical applications. Use of AiT products in such applications is understood to be fully at the risk of the customer. As used herein may involve potential risks of death, personal injury, or servere property, or environmental damage. In order to minimize risks associated with the customer's applications, the customer should provide adequate design and operating safeguards. AiT Semiconductor Inc. assumes to no liability to customer product design or application support. AiT warrants the performance of its products of the specifications applicable at the time of sale. REV1.2 - MAY 2012 RELEASED, JAN 2013 UPDATED
A78XX. AiT Semiconductor Inc. ORDERING INFORMATION
DESCRIPTION The series of three-terminal positive regulator are available in the TO-220 package and with several fixed output voltages, making them useful in a wide range of applications. Each type employs
MC78XX/LM78XX. 3-terminal 1A positive voltage regulator. Features. Description. Internal Block Digram.
www.fairchildsemi.com 3-terminal 1A positive voltage regulator Features Current up to 1A Voltages of 5, 6, 8, 9, 10, 11, 12, 15, 18, 24V Thermal Overload Protection Short Circuit Protection Transistor
MC78XXE. 3-Terminal 1A Positive Voltage Regulator. Features. Description. Internal Block Digram.
-Terminal A Positive Voltage Regulator www.fairchildsemi.com Features Current up to A Voltages of 5, V Thermal Overload Protection Short Circuit Protection Transistor Safe Operating Area Protection Description
A1117A BIPOLAR LDO REGULATOR 1A CURRENT LIMIT AND THERMAL PROTECTION
DESCRIPTION is a series of low dropout three-terminal regulators with a typical dropout of 1.3V at 1A load current. Besides fixed voltage version (VOUT = 1.2V, 1.5, 1.8V, 2.5V, 3.3V, 5V), has an adjustable
A1117A 15V, 1A BIPOLAR LINEAR REGULATOR CURRENT LIMIT AND THERMAL PROTECTION
DESCRIPTION is a series of low dropout three-terminal regulators with a dropout of 1.3V at 1A load current. features a very low standby current 2mA compared to 5mA of competitor. Other than a fixed version,
A1084 5A LOW-DROPOUT POSITIVE VOLTAGE REGULATOR THERMAL SHUTDOWN AND CURRENT LIMIT FUNCTIONS
DESCRIPTION The is a series of low dropout three terminal regulators with a dropout of 1.4V at 5A load current. Other than a fixed version (VOUT = 1.8V, 2.5V, 3.3V, 5V), The has an adjustable version,
A6304A. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves high ripple rejection and low dropout and consists of a standard
LINEAR INTEGRATED CIRCUIT
3-TERMINAL A POSITIVE VOLTAGE REGULATOR DESCRIPTION The Contek 78XX family is monolithic fixed voltage regulator integrated circuit. They are suitable for applications that required supply current up to
UTC78XX LINEAR INTEGRATED CIRCUIT YOUW ANG ELECTRONICS CO.LTD 1 3 TERMINAL 1A POSITIVE VOLTAGE REGULATORS
TERMINAL A POSITIVE VOLTAGE REGULATORS DESCRIPTION The series o three-terminal positive regulators are available in TO-0 package and with several fixed output voltage, making them useful in a wide range
KA76L05. Low Dropout Voltage Regulator. Description. Features. Internal Block Diagram.
Low Dropout Voltage Regulator www.fairchildsemi.com Features Limited input voltage and high efficiency. Internal thermal over load protection. 6V load dump protection. Output current up to.1a. Description
A6251 LOW DROPOUT VOLTAGE REGULATOR 250mA, LOW POWER CONSUMPTION LDO
DESCRIPTION The series are a group of positive voltage output, three pin regulator, that provide a high current even when the input/output Voltage differential is small. Low power consumption and high
A7596. AiT Semiconductor Inc. APPLICATION TYPICAL APPLICATION ORDERING INFORMATION
DESCRIPTION The series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 3A load with excellent line
A7534 DC-DC CONVERTER/BOOST(STEP-UP) 0.9V STARTUP, 1MHZ, 300MA IOUT, LOW IQ, SYNCHRONOUS BOOST CONVERTER
DESCRIPTION The is a step-up converter that provides a boosted output voltage from a low voltage source. Because of its proprietary design, it starts up at a very low input voltage down to 0.9V, and only
TX78XX Three-terminal positive voltage regulator
Features Output Current of 1.2A Thermal Overload Protection Short Circuit Protection Output transistor safe area protection No external components Package:TO220 Output voltage accuracy: tolerance ±5% General
A6318. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION
DESCRIPTION The is designed for portable RF and wireless applications with demanding performance and space requirements. The performance is optimized for battery-powered systems to deliver ultra low noise
The 2SC4177 is available in SC-70 Package High DC Current Gain Complementary to 2SA1611 High Voltage Available in SC-70 Package
DESCRIPTION FEATURES The is available in SC-70 Package High DC Current Gain Complementary to 2SA1611 High Voltage Available in SC-70 Package ORDERING INFORMATION APPLICATIONS Package Type SC-70 Part Number
The LM78xxA series is available in 7 fixed output voltage:5v,6v,8v,9v,12v,15v and 18V.
1A Standard Positive Voltage Regulator 1A Standard Positive Voltage Regulator General Description The series is three terminal standard positive voltage regulator designed for a wide range of applications
A6305. AiT Semiconductor Inc. DESCRIPTION FEATURES APPLICATION ORDERING INFORMATION
DESCRIPTION The is a dual, low-noise, low-dropout regulator delivering at least 300mA of continuous output current. The output voltage for each regulator is set independently by trimming. Voltages are
A7632A. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The is a constant frequency, current mode step-up converter intended for small, low power applications. The switches at 1.2MHz and allows the use of tiny, low cost capacitors and inductors
A6303A CMOS LOW DROPOUT REGULATOR (LDO) 300mA ULTRA-LOW NOISE, ULTRA-FAST RESPONSE
DESCRIPTION The is designed for portable RF and wireless applications with demanding performance and space requirements. The performance is optimized for battery powered systems to deliver ultra low noise
A7530 DC-DC CONVERTER HIGH EFFICIENCY LOW NOISE PFM STEP-UP DC-DC CONVERTER
HIGH EFFICIENCY LOW NOISE PFM STEP-UP DESCRIPTION FEATURES series are CMOS-based PFM step-up DC-DC Converter. The converter can start up by supply voltage as low as 0.8V, and capable of delivering maximum
A8230A ULTRA LOW-DROPOUT CONSTANT-CURRENT WITHOUT WHITE LED BIAS
DESCRIPTION The is a high performance ultra lowdropout constant current bias supply for white LEDs. It can be used as an alternative to the simple ballast resistors in conventional parallel white LEDs
A7221 DC-DC CONVERTER/ BUCK (STEP-DOWN) HIGH EFFICIENCY FAST RESPONSE, 2A, 16V INPUT SYNCHRONOUS STEP-DOWN CONVERTER
DESCRIPTION develops high efficiency synchronous step-down DC-DC converter capable of delivering 2A load current. operates over a wide input voltage range from 6V to 16V and integrates main switch and
A7406A DC-DC CONVERTER BUCK (STEP-DOWN) 40V, 600mA ASYNCHRONOUS
DESCRIPTION The is a high frequency (1.8MHz) step-down switching regulator with integrated internal high-side high voltage power MOSFET. It provides single 0.6A(or less) highly efficient output with current
AM3400A MOSFET 30V N-CHANNEL ENHANCEMENT MODE
DESCRIPTION is the N-Channel enhancement mode power field effect transistors are using trench DMOS technology. This advanced trench technology devices are well suited for high efficiency fast switching
A7108. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. The device is available in an adjustable version. Supply current with no
KA378R05. Low Dropout Voltage Regulator. Features. Description. Internal Block Diagram.
KA78R5 Low Dropout Voltage Regulator www.fairchildsemi.com Features A / 5V Output low dropout voltage regulator TO Full-Mold package (PIN) Overcurrent protection, Thermal shutdown Overvoltage protection,
A7121A. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. Supply current with no load is 300uA and drops to
TL780 SERIES POSITIVE-VOLTAGE REGULATORS
±1% Output Tolerance at ±2% Output Tolerance Over Full Operating Range Thermal Shutdown description Internal Short-Circuit Current Limiting Pinout Identical to µa7800 Series Improved Version of µa7800
AM7414 MOSFET N-CHANNEL ENHANCEMENT MODE
DESCRIPTION The is available in DFN8(3x3) Package ORDERING INFORMATION Package Type Part Number DFN8(3x3) J8R J8 SPQ: 5,000pcs/Reel J8VR V: Halogen free Package Note R: Tape & Reel AiT provides all RoHS
A4771. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The Smart Switch is a current limited P-channel MOSFET power switch designed for high-side load switching applications. This switch operates with inputs ranging from 2.4V to 5.5V, making it
KA378R33. Low Dropout Voltage Regulator. Features. Description. Internal Block Diagram.
www.fairchildsemi.com KA378R33 Low Dropout Voltage Regulator Features 3A / 3.3V Output low dropout voltage regulator TO22 Full-Mold package (4PIN) Overcurrent protection, Thermal shutdown Overvoltage protection,
A8133 HIGH EFFICIENCY, HIGH POWER WHITE LED DRIVER 1MHz FREQUENCY, INTERNAL 2A MOSFET SWITCH
DESCRIPTION The is a boost DC-DC converter that delivers a regulated output current. The switches at a 1.0MHz constant frequency, allowing for the use of small value external inductor and ceramic capacitors.
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD 3-TERMINALS 0.5A POSITIVE VOLTAGE REGULATOR DESCRIPTION SOT-223 TO-25 The UTC family is monolithic fixed voltage regulator integrated circuit. They are suitable for applications
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD 3A ADJUSTABLE/FIXED LOW DROPOUT LINEAR REGULATOR TO-220 DESCRIPTION The UTC -xx series are low dropout three-terminal regulators with 3A output current capability. These
A MHZ, 1.2A, 7V SYNCHRONOUS PWM BUCK (STEP-DOWN) DC-DC CONVERTER
DESCRIPTION The is a high-efficiency, DC-to-DC step-down switching regulators, capable of delivering up to 1.2A of output current. The device operates from an input voltage range of 2.6V to 7.0V and provides
L78. Positive voltage regulator ICs. Description. Features
Positive voltage regulator ICs Datasheet - production data Features Output current up to 1.5 A Output voltages of 5; 6; 8; 8.5; 9; 12; 15; 18; 24 V Thermal overload protection Short circuit protection
A7115. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. Supply current with no load is 300uA and drops to
UNISONIC TECHNOLOGIES CO., LTD 78DXX
UNISONIC TECHNOLOGIES CO., LTD 78DXX 3-TERMINALS 0.5A POSITIVE VOLTAGE REGULATOR DESCRIPTION The UTC 78DXX family is monolithic fixed voltage regulator integrated circuit. They are suitable for applications
AM3416 MOSFET N-CHANNEL ENHANCEMENT MODE MOSFET
N-CHANNEL ENHANCEMENT MODE DESCRIPTION FEATURES is available in a SOT-23 package. 20V/6A, RDS(ON)=26mΩ(Max.) @VGS=4.5V RDS(ON)=37mΩ(Max.) @VGS=2.5V ESD Protected Super High Dense Cell Design Reliable and
A7404. AiT Semiconductor Inc. APPLICATION TYPICAL APPLICATION ORDERING INFORMATION
DESCRIPTION FEATURES The is a wide input range, high-efficiency, and high frequency DC-to-DC step-down switching regulator, capable of delivering up to 0.4A of output current. With a fixed switching frequency
AM V N-CHANNEL ENHANCEMENT MODE MOSFET
DESCRIPTION The is the N-Channel logic enhancement mode power field effect transistor is produced using high cell density. Advanced trench technology to provide excellent RDS(ON). This high density process
A7523. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION
DESCRIPTION The is a compact, high efficiency, and low voltage step-up DC/DC converter with an Adaptive Current Mode PWM control loop, includes an error amplifier, ramp generator, comparator, switch pass
NJM2396 LOW DROPOUT VOLTAGE REGULATOR WITH ON/OFF CONTROL V IN V OUT CONTROL GND. The NJM2396 is low dropout voltage regulator with ON/OFF control.
NJM9 LOW DROPOUT VOLTAGE REGULATOR WITH ON/OFF CONTROL GENERAL DESCRIPTION The NJM9 is low dropout voltage regulator with ON/OFF control. The output current is up to.a and dropout voltage is.vtyp. at Io=.A.
A W STEREO CLASS-D AUDIO POWER AMPLIFIER WITH DC VOLUME CONTROL
DESCRIPTION The is a stereo Class-D audio amplifier with volume control. It delivers up to 2.5W for each channel (5W in all) into a 3Ω load or 2W for each channel (4W in all) into a 4Ω load or 1.25W for
AH8113. AiT Semiconductor Inc. APPLICATION TYPICAL APPLICATION ORDERING INFORMATION
DESCRIPTION The is an integrated hall-effect sensor designed specifically to meet the requirements of low-power devices. e.g. as an On/Off switch in Cellular Flip-Phones, with battery operating voltages
APPLICATION. WLED Drivers Networking cards powered from PCI or PCI-express slots MID and Mobile Power The A7642 is available in SOT-26 package.
DESCRIPTION is an asynchronous PWM boost converter using a constant frequency peak current mode. An external Schottky diode is needed. At light load, works in the light load mode. The supply current during
LOW DROPOUT VOLTAGE REGULATOR WITH ON/OFF CONTROL PIN FUNCTION 1. V IN 2. ON/OFF CONTROL 3. V OUT 4. N.C. 5. GND NJM2388F. Overvoltage.
NJM8/88 LOW DROPOUT VOLTAGE REGULATOR WITH ON/OFF CONTROL GENERAL DESCRIPTION The NJM8/88 is a general purpose low dropout voltage regulators with ON/OFF control. The output current is up to.a and dropout
100mA 3-Terminal Positive Voltage Regulator
Solved by SP78LXX TM 100mA -Terminal Positive Voltage Regulator Features SOT-8 Package Output Current up to 100 ma Fixed Output Voltage of 5V and 1V Output Voltage Tolerances of 5% over the Full Temperature
LM317M. 3-Terminal 0.5A Positive Adjustable Regulator. Features. Description. Internal Block Diagram.
www.fairchildsemi.com 3-Terminal 0.5A Positive Adjustable Regulator Features Output Current in Excess of 0.5A Output Adjustable Between 1.2V and 37V Internal Thermal Overload Protection Internal Short
A7221A DC-DC CONVERTER/BUCK (STEP-DOWN) 600KHz, 16V, 2A SYNCHRONOUS STEP-DOWN CONVERTER
DESCRIPTION The is a fully integrated, high efficiency 2A synchronous rectified step-down converter. The operates at high efficiency over a wide output current load range. This device offers two operation
AM9435 MOSFET -30V P-CHANNEL ENHANCEMENT MODE
DESCRIPTION The is the P-Channel logic enhancement mode power field effect transistors are produced using high cell density, DMOS trench technology. This high density process is especially tailored to
NJM2835 LOW DROPOUT VOLTAGE REGULATOR V OUT V IN GND
LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM285 is a 5mA output low dropout voltage regulator. Advanced Bipolar technology achieves low noise, high ripple rejection and high supply voltage.
A8160A. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The is a step-up DC-DC converter specifically designed for driving white LEDs with a constant current. The internal MOSFET can support up to 10 White LEDs for backlighting and OLED power application,
A2211 CLASS AB 1.25 W DIFFERENTIAL AUDIO POWER AMPLIFIER WITH INTERNAL FEEDBACK CIRCUIT
DESCRIPTION The is a fully differential audio power amplifier designed for portable communication device applications. The is capable of delivering 1.25W of continuous average power to an 8Ω BTL load with
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD 1.5A ADJUSTABLE/FIXED LOW DROPOUT LINEAR REGULATOR DESCRIPTION The UTC UZ186 and UZ186-1.2V, 1.8V, 2.5V, 2.85V, 3.3V and 5V are low dropout three-terminal regulators with
REV1.0 - AUG 2012 RELEASED
DESCRIPTION The consists of step-down switching regulator with PWM control. These devises include a reference voltage source, oscillation circuit, error amplifier, internal PMOS and etc. provides low-ripple
AM8205 MOSFET+SCHOTTKY DIODE 20V DUAL N-CHANNEL ENHANCEMENT MODE
DESCRIPTION The is the Dual N-Channel logic enhancement mode power field effect transistor which is produced using high cell density. Advanced trench technology to provide excellent RDS(ON). This high
A6155 LOW DROPOUT VOLTAGE REGULATOR 150mA DUAL OUTPUT CMOS LOW NOISE
DESCRIPTION The is a dual output, low noise; low-dropout regulator delivers at least 150mA of continuous output current. The output voltage for each regulator is set independently by trimming. Voltages
MBR220F~MBR2200F SCHOTTKY BARRIER RECTIFIER REVERSE VOLTAGE 20V TO 200V FORWARD CURRENT 2.0A
DESCRIPTION FEATURES The are available in SOD-123FL Package ORDERING INFORMATION Metal silicon junction, majority carrier conduction For surface mounted applications Low power loss, high efficiency High
ST1117. Linear Voltage Regulator. 1A Low Dropout Positive Regulator FEATURE DESCRIPTION APPLICATIONS PIN CONFIGURATION PART NUMBER INFORMATION
DESCRIPTION The is a positive low dropout voltage regulators with 1A output current capability. In order to obtain lower dropout voltage and fast transient response, which is critical for low voltage application.
AM2300. AiT Semiconductor Inc. APPLICATION ORDER INFORMATION PIN CONFIGURATION
DESCRIPTION The is the N-Channel logic enhancement mode power field effect transistor is produced using high cell density. Advanced trench technology to provide excellent RDS(ON). FEATURES 20V/4.0A, RDS(ON)
NJM79M00 3-TERMINAL NEGATIVE VOLTAGE REGULATOR
3-TERMINAL NEGATIVE VOLTAGE REGULATOR NJM79M00 GENERAL DESCRIPTION The NJM79M00 series of 3-Terminal Negative Voltage Regulators are constructed using the New JRC Planar epitaxial process. These regulators
TX78LXXB. Features. General Description. Pin Configuration.
Features Output Current of 300mA Thermal Overload Protection Short Circuit Protection Output transistor safe area protection No external components Package:SOT89-3 and TO92 Output voltage accuracy: tolerance
1A Standard Negative Voltage Regulator LM79XX. General Description. Features. Applications
1A Standard Negative Voltage Regulator 1A Standard Negative Voltage Regulator General The series is three terminal standard negative voltage regulator designed for a wide range of applications that required
A2327. AiT Semiconductor Inc. ORDERING INFORMATION APPLICATION
DESCRIPTION The is a 2.6W high efficiency filter-free class-d audio power amplifier that requires only three external components. Features like 88% efficiency, 75dB PSRR, and improved RF-rectification
NJM2860 LOW DROPOUT VOLTAGE REGULATOR
LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The is a low dropout voltage regulator. Advanced Bipolar technology achieves low noise, high ripple rejection and low quiescent current. It features small
NJM2386/88 LOW DROPOUT VOLTAGE REGULATOR WITH ON/OFF CONTROL V IN V OUT CONTROL GND
NJM8/88 LOW DROPOUT VOLTAGE REGULATOR WITH ON/OFF CONTROL GENERAL DESCRIPTION The NJM8/88 is a general purpose low dropout voltage regulators with ON/OFF control. The output current is up to.a and dropout
TL FIXED-VOLTAGE REGULATORS FOR SCSI ACTIVE TERMINATION
Fully Matches Parameters for SCSI Alternative 2 Active Termination Fixed 2.85-V Output ±1.5% Maximum Output Tolerance at T J = 25 C 1-V Maximum Dropout Voltage 500-mA Output Current ±3% Absolute Output
TS7900 Series 3-Terminal Fixed Negative Voltage Regulator
TO-220 ITO-220 TO-263 (D 2 PAK) Pin Definition: 1. Ground 2. Input (tab) 3. Output General Description The TS7900 series of fixed output negative voltage regulators are intended as complements to the popular
A7130. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The is a synchronous, 1.4MHz, fix frequency PWM Buck converter. It is ideal for powering portable equipment that powered by a single cell Lithium-ion battery, or USB port. The can provide up
LM78XX Series Voltage Regulators
LM78XX Series Voltage Regulators General Description Connection Diagrams The LM78XX series of three terminal regulators is available with several fixed output voltages making them useful in a wide range
TL783 HIGH-VOLTAGE ADJUSTABLE REGULATOR
HIGH-VOLTAGE USTABLE REGULATOR Output Adjustable From 1.25 V to 125 V When Used With an External Resistor Divider 7-mA Output Current Full Short-Circuit, Safe-Operating-Area, and Thermal-Shutdown Protection.1%/V
1.5A Adjustable Positive Voltage Regulator TL A Adustable Positive Voltage Regulator. General Description. Features. Ordering Information
1.5A Adjustable Positive Voltage Regulator 1.5A Adustable Positive Voltage Regulator General Description The is adjustable 3-terminal positive voltage regulator capable of supplying in excess of 1.5A over
NJM TERMINAL POSITIVE VOLTAGE REGULATOR
3-TERMINAL POSITIVE VOLTAGE REGULATOR NJM7800 GENERAL DESCRIPTION The NJM7800 series of monolithic 3-Terminal Positive Voltage Regulators is constructed using the New JRC Planar epitaxial process. These
NJM TERMINAL POSITIVE VOLTAGE REGULATOR
3-TERMINAL POSITIVE VOLTAGE REGULATOR NJM7800 GENERAL DESCRIPTION The NJM7800 series of monolithic 3-Terminal Positive Voltage Regulators is constructed using the New JRC Planar epitaxial process. These
NJM78M00 3-TERMINAL POSITIVE VOLTAGE REGULATOR
3-TERMINAL POSITIVE VOLTAGE REGULATOR NJM78M00 GENERAL DESCRIPTION The NJM78M00 series of 3-Terminal Positive Voltage Regulators is constructed using the New JRC Planar epitaxial process. These regulators
LM337MT MEDIUM CURRENT THREE TERMINAL ADJUSTABLE NEGATIVE VOLTAGE REGULATOR
Order this document by /D The is an adjustable threeterminal negative voltage regulator capable of supplying in excess of 5 ma over an output voltage range of 1.2 V to 37 V. This voltage regulator is exceptionally
NJM2387A ADJUSTABLE LOW DROPOUT VOLTAGE REGULATOR WITH ON/OFF CONTROL
ADJUSTABLE LOW DROPOUT VOLTAGE REGULATOR WITH ON/OFF CONTROL GENERAL DESCRIPTION The NJM37A is an adjustable low dropout voltage regulator. The output current is up to.a and dropout voltage is.v typ. at
A2331 AUDIO AMPLIFIER MONAURAL 3W NON-CLIP DIGITAL
DESCRIPTION is a 3W (VDD = 5.0V, RL = 4Ω) high efficiency filter-free class-d audio power amplifier in a wafer chip scale package (CSP). has a Professional non-clip output control circuit which reducing
THREE TERMINAL POSITIVE FIXED VOLTAGE REGULATORS
Order this document by MC7800/D These voltage regulators are monolithic integrated circuits designed as fixed voltage regulators for a wide variety of applications including local, on card regulation.
TPS7415, TPS7418, TPS7425, TPS7430, TPS7433 FAST-TRANSIENT-RESPONSE USING SMALL OUTPUT CAPACITOR 200-mA LOW-DROPOUT VOLTAGE REGULATORS
Fast Transient Response Using Small Output Capacitor ( µf) 2-mA Low-Dropout Voltage Regulator Available in.5-v,.8-v, 2.5-V, 3-V and 3.3-V Dropout Voltage Down to 7 mv at 2 ma () 3% Tolerance Over Specified
PQxxxGN01ZPH Series. Outline Dimensions. Features. Applications. Model Line-up. Absolute Maximum Ratings
PQxxxGNZPH Series PQxxxGNZPH Series Low Voltage Operation,Compact Surface Mount type Low Power-Loss Voltage Regulators Features.Low voltage output (VO=. to.v).low voltage operation: (MIN)=.7V.Output current
WL2803E WL2803E. Descriptions. Features. Order Information. Applications. Ultra low dropout, 500mA, CMOS LDO.
Ultra low dropout, 500mA, CMOS LDO Http://www.sh-willsemi.com Descriptions The series are ultra low dropout, Low quiescent current, high PSRR CMOS LDO. The dropout voltage is 130mV (Typ.) at 500mA load
TS1085 3A Low Dropout Positive Voltage Regulator
TO-220 TO-263 (D 2 PAK) TO-252 (DPAK) Pin Definition: 1. Fixed / Adj 2. Output 3. Input Pin 2 connect to heat sink General Description TS1085 are high performance positive voltage regulators are designed
AP8010. AiT Semiconductor Inc. APPLICATION
DESCRIPTION The is a high performance AC-DC off line controller for low power battery charger and adapter applications with Universal input. It uses Pulse Frequency and Width Modulation (PFWM) method to
500mA CMOS Ultra Low Dropout Linear Regulator
500mA CMOS Ultra Low Dropout Linear Regulator Description The series are 500mA CMOS ultra low dropout positive voltage regulators which operate from 2.4V to 5.5V input supply. The ultra low dropout linear
150mA Regulator Monolithic IC MM157 N, 161 N
MITSUMI 5mA Regulator MM57, 6 5mA Regulator Monolithic IC MM57, 6 Outline This IC is an ultra-small, low noise, stable power supply that supports ceramic capacitors (low ESR) Output current goes up to
A MHz, 600mA S YNCHRONOUS STEP-DOWN CONVERTER. Thermal Resistance. Top View. Ordering Information. θ JC. θ JA. Part Number A7106E5-Adj
Description Features The is a 1.5MHz constant frequency, slope compensated current mode PWM step-down converter. The device integrates a main switch and a synchronous rectifier for high efficiency without
WL2803E WL2803E. Descriptions. Features. Order Information. Applications. Ultra low dropout, 500mA, CMOS LDO.
Ultra low dropout, 500mA, CMOS LDO Http://www.sh-willsemi.com Descriptions The series are ultra low dropout, Low quiescent current, high PSRR CMOS LDO. The dropout voltage is 130mV (Typ.) at 500mA load
TS1117B 1A Low Dropout Positive Voltage Regulator
TO-252 (DPAK) SOT-223 Pin Definition: 1. Fixed / Adj 2. Output (Tab) 3. Input SOP-8 Pin Definition: 1. Fixed / Adj 8. N/C 2. Output 7. Output 3. Output 6. Output 4. Input 5. N/C General Description TS1117B
Low Dropout Voltage Regulator
Low Dropout Voltage Regulator GENERAL DESCRIPTION The is a ma output low dropout voltage regulator with ON/OFF control. Advanced bipolar technology achieves low noise, high ripple rejection, high accuracy
ZSAT600 6 VOLT ENHANCED POSITIVE LOCAL VOLTAGE REGULATOR ISSUE 1 - AUGUST 1996 DEVICE DESCRIPTION FEATURES APPLICATIONS SCHEMATIC DIAGRAM. Vin.
6 VOLT ENHANCED POSITIVE LOCAL VOLTAGE REGULATOR ISSUE 1 - AUGUST 1996 DEVICE DESCRIPTION The ZSAT6 is an enhanced three terminal fixed positive 6 volt regulator. The device is designed particularly for
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD 2A OUTPUT TYPE LOW POWER-LOSS VOLTAGE REGULATOR FEATURES * 2.A output type * Output voltage precision: ±2.5% * Built-in ON/OFF control function and over-current protection
DROPOUT VOLTAGE REGULATOR
ch LOW DROPOUT VOLTAGE REGULATOR! GENERAL DESCRIPTION! PACKAGE OUTLINE The is a ch low dropout voltage regulator with ON/OFF control. Advanced Bipolar technology achieves low noise, high ripple rejection
ACE502. Technology. Typical Performance Characteristic: A CE50218AM+ Dropout Voltage. Vin (V) VER 1.2 1
Description series is a group of positive voltage output, low power consumption, low dropout voltage, three terminal regulator. It can provide 200mA output current when input / output voltage differential
TL594C, TL594I, TL594Y PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
Very Low Output Voltage Series Regulator
Very Low Output Voltage Series Regulator GENERAL DESCRIPTION The NJM2847 is a series voltage regulator that delivers up to 15mA output current with the output voltage of.8 to 1.4V with ON/OFF control.
TL-SCSI285 FIXED-VOLTAGE REGULATORS FOR SCSI ACTIVE TERMINATION
Fully Matches Parameters for SCSI Alternative 2 Active Termination Fixed 2.85-V Output ±1% Maximum Output Tolerance at T J = 25 C 0.7-V Maximum Dropout Voltage 620-mA Output Current ±2% Absolute Output
Is Now Part of. To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers