Radio Collocation test report

Size: px

Start display at page:

Download "Radio Collocation test report"

Christian Owen
5 years ago
Views:

1 RR A Ed. Radio Collocation test report According to the standard: CFR47 FCC part 15 Equipment under test: RFID MODULE HF-ELYCTIS integrated in Biometric/RFID Handheld Control Terminal WA4e-ID-WG-OCR31e Company: COPPERNIC DISTRIBUTION: Mr Porte (Company: COPPERNIC) Number of pages: 34 with 3 appendixes Ed. Date 29/1/215 Modified Written by pages Name Creation S. LOUIS Technical Verification and Quality Approval Visa Name Visa Duplication of this test report is only permitted for an integral photographic facsimile. It includes the number of pages referenced here above. This document is the result of testing a specimen or a sample of the product submitted. It does not imply an assessment of the conformity of the whole manufactured products of the tested sample. Siège Social : Emitech - 3, rue des Coudriers - Z.A. de l Observatoire MONTIGNY LE BX - France Siret : Tél. : 33 () Fax : 33 () contact@emitech.fr - URL : S.A. au capital de R.C.S. VERSAILLES APE 7112B

2 DESIGNATION OF PRODUCT: RFID MODULE HF-ELYCTIS Installed in HOSTS: Biometric/RFID Handheld Control Terminal WA4e-ID-WG-OCR31e Serial number (S/N): WPQACE2479C1 (host) Reference / model (P/N): Software version: CpcCertifWAP4 to activate RFID BTTestWM V2.1 to activate Bluetooth XM2DMT_WM to activate WIFI MANUFACTURER: COMPANY SUBMITTING THE PRODUCT: Company: Address: Responsible: COPPERNIC 185, avenue Archimède Les fontaines de la Duranne Aix-en-Provence Cedex 3 France Mr PORTE DATES OF TEST: From 15 January 215 to 3 January 215 TESTING LOCATION: EMITECH ANGERS laboratory at JUIGNE SUR LOIRE (49) FRANCE EMITECH ANGERS open area test site in JUIGNE SUR LOIRE (49) FRANCE 21 rue de la Fuye 4961 Juigne sur Loire France FCC Listed Site Registration Number: 9469 TESTED BY: S. LOUIS Page 2 out of 34

3 CONTENTS TITLE PAGE 1. INTRODUCTION 4 2. PRODUCT DESCRIPTION 4 3. NORMATIVE REFERENCE 8 4. TEST METHODOLOGY 8 5. TEST EQUIPMENT CALIBRATION DATES 9 6. TESTS RESULTS SUMMARY 1 7. CONDUCTED LIMITS RADIATED EMISSION LIMITS; general requirements 25 APPENDIX 1: Photos of the equipment under test APPENDIX 2: Test set up APPENDIX 3: Test equipment list Page 3 out of 34

4 1. INTRODUCTION This report presents the results of radio test carried out on the RFID Module HF-ELYCTIS installed in WAP4 e-id-wg-ocr31e, in accordance with normative reference (refer clause 3). The device under test integrates a Limited modular approved RFID module (FCC ID: XGKHFELYWAP3). The device under test integrates a modular approved WIFI/BLUETOOTH module (FCC ID: UZ B). The device under test integrates a modular approved 3G module (FCC ID: UZ77528PA). The host device of certified module(s) shall be properly labeled to identify the modules within. All radio modules (RFID, WIFI, Bluetooth, 3G,) are activated under different configurations to check there is no disturbance between each radio modules. 2. PRODUCT DESCRIPTION EUT is portable and handheld authentication terminal, with the following parts: Version WA4eID-WG-OCR31E with: RFID Elyctis activated WIFI set to 2.4GHz Bluetooth activated 3G set to band II Version WA4eID-WG-OCR31E with: RFID Elyctis activated WIFI set to 5.8GHz Bluetooth activated 3G set to band II Version WA4eID-WG-OCR31E with: RFID Elyctis activated WIFI set to 2.4GHz Bluetooth activated 3G set to band V Version WA4eID-WG-OCR31E with: RFID Elyctis activated WIFI set to 5.8GHz Bluetooth activated 3G set to band V Page 4 out of 34

7Vdc Lithium Ion battery TEKLOGIX model WA31.

5 The power source is an external AC/DC adapter provided by the applicant referenced PSA15R-5P regulated at the voltage of 12VAC / 6Hz. The EUT can be equally supplied with a 3.7Vdc Lithium Ion battery TEKLOGIX model WA31. All tests described here after have been performed with the AC/DC adapter. Standard position: handheld. Tested in vertical position, according to the applicant request. Page 5 out of 34

6 RFID Module description: Antenna type and gain: Operating frequency range: Integral antenna, gain unknown From 13.11MHz to 14.1MHz Number of channels: 1 Channel spacing: Frequency generation: Not concerned Quartz Power level, frequency range and channels characteristics are not user adjustable. The details pictures of the product are joined with this file. WIFI 2.4G Module description: Antenna type and gain: Operating frequency range: Not communicated From 2412MHz to 2472MHz Number of channels: 13 Channel spacing: Modulation: 5MHz D.S.S.S./O.F.D.M. Power level, frequency range and channels characteristics are not user adjustable. The details pictures of the product are joined with this file. WIFI 5.8G Module description: Antenna type and gain: Operating frequency range: Not communicated From 518MHz to 5825MHz Number of channels: 21 Channel spacing: Modulation: 2MHz D.S.S.S./O.F.D.M. Power level, frequency range and channels characteristics are not user adjustable. The details pictures of the product are joined with this file. Page 6 out of 34

7 Bluetooth Module description: Antenna type and gain: Operating frequency range: Not communicated From 242MHz to 248MHz Number of channels: 79 Channel spacing: Modulation: 1MHz F.H.S.S. Power level, frequency range and channels characteristics are not user adjustable. The details pictures of the product are joined with this file. 3G Module description: Antenna type and gain: Operating frequency range: Not communicated From 824.2MHz to 849.2MHz (Band V From 185.2MHz to 199.8MHz (Band II) Number of channels: 128 to 251 (Band V) 512 to 81 (Band II) Channel spacing: Modulation: GSM-85 / PCS-19 Power level, frequency range and channels characteristics are not user adjustable. The details pictures of the product are joined with this file Page 7 out of 34

8 3. NORMATIVE REFERENCE The standards and testing methods related throughout this report are those listed below. They are applied on the whole test report even though the extensions (version, date and amendment) are not repeated. CFR 47 FCC Part 15 (214) Radio Frequency Devices ANSI C Methods of measurement of Radio-Noise Emissions from low-voltage Electrical and Electronic Equipment in the Range of 9 khz to 4 GHz. ANSI C Testing Unlicensed Wireless Devices. 4. TEST METHODOLOGY Radio performance tests procedures given in CFR 47 part 15: Subpart A General Paragraph 19: Paragraph 21: labelling requirements information to user Subpart B Unintentional Radiators Paragraph 15: information to the user Paragraph 17: conducted limits Paragraph 19: radiated emission limits Paragraph 111: antenna power conduction limits for receivers Subpart C Intentional Radiators Paragraph 23: Antenna requirement Paragraph 27: Conducted limits Paragraph 29: Radiated emission limits; general requirements Paragraph 212: Modular transmitter Page 8 out of 34

9 5. TEST EQUIPMENT CALIBRATION DATES Equipment Model Type Last Next verification verification Validity BAT-EMC V Software / / / 146 EMCO 652 Loop antenna 26/6/213 26/3/215 26/5/ Microwave DB C218F-4B1 Low-noise amplifier 2/8/214 2/8/215 2/1/ IMC WR42 Antenna 2/4/212 2/4/216 2/6/ IMC WR42 Antenna 2/4/212 2/4/216 2/6/ ALC Microwave ALN2-12 Low-noise amplifier 14/5/214 14/5/215 14/7/ Filtek LP3/1-7GH Low Pass Filter 24/2/214 24/2/216 24/4/ R&S FSP4 Spectrum Analyzer 22/8/213 22/8/215 22/1/ ATM WR28 Antenna 2/4/212 2/4/216 2/6/ ALC ALS Low-noise amplifier 21/7/214 21/7/215 21/9/ Wainwright WLJS8- C11/6EE Low Pass Filter 24/2/214 24/2/216 24/4/ Microtronics LPM 1561 Low Pass Filter 5/4/213 5/4/215 5/6/ Microtronics HPM 156 High Pass Filter 5/4/213 5/4/215 5/6/ Hewlett Packard HPM1163 High Pass Filter 24/2/214 24/2/216 24/4/ Microtronics BR572 Reject band filter 25/1/213 25/1/215 25/12/ California instruments 1251RP Power source 22/8/214 22/8/215 22/1/ HP 8447D Low noise preamplifier 2/8/214 2/8/215 2/1/ HP 8591EM Test receiver 3/7/213 3/7/215 3/9/ Schwarzbeck VHBB 9124 Biconical antenna 12/6/212 12/6/216 12/8/ EMCO 3115 Antenna 29/1/212 29/1/216 29/12/ Schwarzbeck UHALP 918A Log periodic antenna 12/6/212 12/6/216 12/8/ SIDT Cage 2 Anechoic chamber / / / 8635 R&S EZ-25 High-pass filter 5/8/214 5/8/216 5/1/ HUGER Meteo station 4/9/214 4/9/216 4/11/ AOIP MN512B Multimeter 15/1/213 15/1/215 15/3/ Thurbly Thandar Instruments 16 LISN 23/6/214 23/6/216 23/8/ La Crosse Technology WS Meteo station 3/9/214 3/9/216 3/11/ Emitech Outside room Hors cage / / / 8896 ACQUISYS GPS8 Satellite synchronized frequency standard / / / 1651 Absorber sheath current Emitech 17/1/213 17/1/215 17/12/215 Page 9 out of 34

10 6. TESTS RESULTS SUMMARY 6.1 general (subpart A) Test Description of test Respected criteria? Comment procedure Yes No NAp NAs FCC Part LABELLING REQUIREMENTS X See certification documents FCC Part INFORMATION TO USER X See certification documents NAp: Not Applicable NAs: Not Asked 6.2 unintentional radiator (subpart B) Test Description of test Respected criteria? Comment procedure Yes No NAp NAs FCC Part INFORMATION TO THE USER X See certification documents FCC Part CONDUCTED LIMITS X Collocation report FCC Part RADIATED EMISSION LIMITS X Collocation report FCC Part ANTENNA POWER CONDUCTED LIMITS FOR RECEIVER X NAp: Not Applicable NAs: Not Asked Page 1 out of 34

11 6.3 intentional radiator (subpart C) Test Description of test Criteria respected? Comment procedure Yes No NAp NAs FCC Part ANTENNA REQUIREMENTS X Note 1 FCC Part CONDUCTED LIMITS X Collocation report FCC Part RADIATED EMISSION LIMITS; GENERAL REQUIREMENTS X Note 2 Collocation report FCC Part MODULAR TRANSMITTER X See certification documents NAp: Not Applicable NAs: Not Asked Note 1: Integral / dedicated antenna. Professionally installed equipment. Note 2: Unwanted emissions levels are all below the fundamental emission field strength level. Page 11 out of 34

12 7. CONDUCTED LIMITS Standard: FCC Part 15 Test procedure: Paragraph Test deviation: Copper tape around RFID reader to reduce the level of the carrier 13.56MHz Software used: BAT-EMC V Test set up: The EUT is isolated and placed on a wooden table,.8 m over a horizontal reference plane and.4 m from a vertical reference plane. It is powered by an artificial main network placed on the ground reference plane. The equipment is powered with the AC power operating voltage of 12 V / 6 Hz. See photos in appendix 2 Frequency range: 15 khz - 3 MHz Detection mode: Peak / Average Bandwidth: 9 KHz / 1 KHz Equipment under test operating condition: The equipment under test is blocked in continuous modulated transmission mode, at the highest output power level at which the transmitter is intended to operate. Results: Ambient temperature ( C): 21.5 Relative humidity (%): 27 Page 12 out of 34

13 Measurement on the mains power supply Transmission mode: Sample 1: Version WA4eID-WG-OCR31E with RFID Elyctis activated, WIFI set to 2.4GHz, Bluetooth activated and 3G set to band II The measurement is first realized with Peak detector. Curve N 1: 9 measurement on the Neutral with peak detector FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Neutre) kHz Fréquence (MHz) 3MHz Ligne: Neutre Curve N 2: 9 measurement on the Line with peak detector FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Phase 1) kHz 3MHz Fréquence (MHz) Ligne: Phase 1 Page 13 out of 34

14 The frequencies which are not 6 db under the Average limit are then analyzed with Average detector. Curve N 3: average measurement on the Neutral, for the frequency range: 15KHz 9KHz FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Neutre) kHz 9kHz Fréquence (MHz) Sous-bande 2 Curve N 4: average measurement on the Line, for the frequency range: 15KHz 7KHz FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Phase 1) kHz 7kHz Fréquence (MHz) Sous-bande 1 Page 14 out of 34

15 Curve N 5: average measurement on the Neutral, for the frequency range: 13.4MHz 13.7MHz FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Neutre) MHz 13.7MHz Fréquence (MHz) Sous-bande 3 Curve N 6: average measurement on the Line, for the frequency range: 13.4MHz 13.7MHz FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Phase 1) MHz 13.7MHz Fréquence (MHz) Sous-bande 6 Page 15 out of 34

16 Sample 1: Version WA4eID-WG-OCR31E with RFID Elyctis activated, WIFI set to 5.8GHz, Bluetooth activated and 3G set to band II The measurement is first realized with Peak detector. Curve N 7: 9 measurement on the Neutral with peak detector FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Neutre) kHz Fréquence (MHz) 3MHz Ligne: Neutre Curve N 8: 9 measurement on the Line with peak detector FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Phase 1) kHz 3MHz Fréquence (MHz) Ligne: Phase 1 Page 16 out of 34

17 The frequencies which are not 6 db under the Average limit are then analyzed with Average detector. Curve N 9: average measurement on the Neutral, for the frequency range: 15KHz 1.1MHz FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Neutre) kHz 1.1MHz Fréquence (MHz) Sous-bande 1 Curve N 1: average measurement on the Line, for the frequency range: 15KHz 1.1MHz FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Phase 1) kHz 1.1MHz Fréquence (MHz) Sous-bande 2 Page 17 out of 34

18 Curve N 11: average measurement on the Neutral, for the frequency range: 13.4MHz 13.7MHz FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Neutre) MHz 13.7MHz Fréquence (MHz) Sous-bande 2 Curve N 12: average measurement on the Line, for the frequency range: 13.4MHz 13.7MHz FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Phase 1) MHz 13.7MHz Fréquence (MHz) Sous-bande 4 Page 18 out of 34

19 Sample 1: Version WA4eID-WG-OCR31E with RFID Elyctis activated, WIFI set to 2.4GHz, Bluetooth activated and 3G set to band V The measurement is first realized with Peak detector. Curve N 13: 9 measurement on the Neutral with peak detector FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Neutre) kHz Fréquence (MHz) 3MHz Ligne: Neutre Curve N 14: 9 measurement on the Line with peak detector FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Phase 1) kHz 3MHz Fréquence (MHz) Ligne: Phase 1 Page 19 out of 34

20 The frequencies which are not 6 db under the Average limit are then analyzed with Average detector. Curve N 15: average measurement on the Neutral, for the frequency range: 15KHz 1.4MHz FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Neutre) kHz 1.4MHz Fréquence (MHz) Sous-bande 2 Curve N 16: average measurement on the Line, for the frequency range: 15KHz 5KHz FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Phase 1) kHz 5kHz Fréquence (MHz) Sous-bande 1 Page 2 out of 34

21 Curve N 17: average measurement on the Neutral, for the frequency range: 13.4MHz 13.7MHz FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Neutre) MHz 13.7MHz Fréquence (MHz) Sous-bande 2 Curve N 18: average measurement on the Line, for the frequency range: 13.4MHz 13.7MHz FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Phase 1) MHz 13.7MHz Fréquence (MHz) Sous-bande 4 Page 21 out of 34

22 Sample 1: Version WA4eID-WG-OCR31E with RFID Elyctis activated, WIFI set to 5.8GHz, Bluetooth activated and 3G set to band V The measurement is first realized with Peak detector. Curve N 19: 9 measurement on the Neutral with peak detector FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Neutre) kHz Fréquence (MHz) 3MHz Ligne: Neutre Curve N 2: 9 measurement on the Line with peak detector FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Phase 1) kHz 3MHz Fréquence (MHz) Ligne: Phase 1 Page 22 out of 34

23 The frequencies which are not 6 db under the Average limit are then analyzed with Average detector. Curve N 21: average measurement on the Neutral, for the frequency range: 15KHz 3MHz FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Neutre) kHz 3MHz Fréquence (MHz) Sous-bande 1 Curve N 22: average measurement on the Line, for the frequency range: 15KHz 3MHz FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Phase 1) kHz 3MHz Fréquence (MHz) Sous-bande 2 Page 23 out of 34

24 Curve N 23: average measurement on the Neutral, for the frequency range: 13.4MHz 13.7MHz FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Neutre) MHz 13.7MHz Fréquence (MHz) Sous-bande 4 Curve N 24: average measurement on the Line, for the frequency range: 13.4MHz 13.7MHz FCC part 15 : Classe:B - Moyenne/ FCC part 15 : Classe:B - QCrête/ Mes.Peak (Phase 1) MHz 13.7MHz Fréquence (MHz) Sous-bande 2 Test conclusion: RESPECTED STANDARD Page 24 out of 34

25 8. RADIATED EMISSION LIMITS; general requirements Standard: FCC Part 15 Test procedure: paragraph 29 Test set up: The measure is realized on open area test site under 1 GHz and in anechoic chamber above 1 GHz. When the system is tested in an open area test site (OATS), the EUT is placed on a rotating table,.8m from a ground plane. When the system is tested in anechoic chamber, the EUT is placed on a rotating table, 1.5m from a ground plane. Zero degree azimuths correspond to the front of the device under test. See photos in appendix 2. Frequency range: From 9 khz to 25GHz (5 th harmonic of the highest fundamental frequency (2.4GHz) Version WA4eID-WG-OCR31E with: RFID Elyctis activated WIFI set to 2.4GHz Bluetooth activated 3G set to band II From 9 khz to 4GHz (5 th harmonic of the highest fundamental frequency (5.8GHz) Version WA4eID-WG-OCR31E with: RFID Elyctis activated WIFI set to 5.8GHz Bluetooth activated 3G set to band II From 9 khz to 25GHz (5 th harmonic of the highest fundamental frequency (2.4GHz) Version WA4eID-WG-OCR31E with: RFID Elyctis activated WIFI set to 2.4GHz Bluetooth activated 3G set to band V From 9 khz to 4GHz (5 th harmonic of the highest fundamental frequency (5.8GHz) Version WA4eID-WG-OCR31E with: RFID Elyctis activated WIFI set to 5.8GHz Bluetooth activated 3G set to band V Page 25 out of 34

26 Detection mode: Quasi-peak (F < 1 GHz) Bandwidth: 12 khz (F < 1 GHz) Average (F > 1 GHz) 1 MHz (F > 1 GHz) Distance of antenna: 1 meters (in open area test site) / 3 meters (in anechoic room) Antenna height: 1 to 4 meters (in open area test site) / 1.5 meter (in anechoic room) Antenna polarization: vertical and horizontal (only the highest level is recorded) Equipment under test operating condition: The equipment under test is blocked in continuous modulated transmission mode, at the highest output power level at which the transmitter is intended to operate. Page 26 out of 34

27 Results: Ambient temperature ( C): 2.4 Relative humidity (%): 33 Power source: We used for power source an external AC/DC adapter provided by the applicant referenced PSA15R-5P regulated at the voltage of 12VAC / 6Hz. Sample 1: Version WA4eID-WG-OCR31E with RFID Elyctis activated, WIFI set to 2.4GHz, Bluetooth activated and 3G set to band II No spurious has been detected. Applicable limits: for 9 khz F 49 khz : 24/F(kHz) at 3 meters for 49 khz < F 1.75 MHz : 24/F(kHz) at 3 meters for 1.75 MHz < F 3 MHz : 29.5 /m at 3 meters for 3 MHz < F 88 MHz : 4 /m at 3 meters for 88 MHz < F 216 MHz : 43.5 /m at 3 meters for 216 MHz < F 96 MHz : 46 /m at 3 meters Above 96 MHz : 54 /m at 3 meters Sample 1: Version WA4eID-WG-OCR31E with RFID Elyctis activated, WIFI set to 5.8GHz, Bluetooth activated and 3G set to band II No spurious has been detected. Applicable limits: for 9 khz F 49 khz : 24/F(kHz) at 3 meters for 49 khz < F 1.75 MHz : 24/F(kHz) at 3 meters for 1.75 MHz < F 3 MHz : 29.5 /m at 3 meters for 3 MHz < F 88 MHz : 4 /m at 3 meters for 88 MHz < F 216 MHz : 43.5 /m at 3 meters for 216 MHz < F 96 MHz : 46 /m at 3 meters Above 96 MHz : 54 /m at 3 meters Page 27 out of 34

28 Sample 1: Version WA4eID-WG-OCR31E with RFID Elyctis activated, WIFI set to 2.4GHz, Bluetooth activated and 3G set to band V No spurious has been detected. Applicable limits: for 9 khz F 49 khz : 24/F(kHz) at 3 meters for 49 khz < F 1.75 MHz : 24/F(kHz) at 3 meters for 1.75 MHz < F 3 MHz : 29.5 /m at 3 meters for 3 MHz < F 88 MHz : 4 /m at 3 meters for 88 MHz < F 216 MHz : 43.5 /m at 3 meters for 216 MHz < F 96 MHz : 46 /m at 3 meters Above 96 MHz : 54 /m at 3 meters Sample 1: Version WA4eID-WG-OCR31E with RFID Elyctis activated, WIFI set to 5.8GHz, Bluetooth activated and 3G set to band V No spurious has been detected. Applicable limits: for 9 khz F 49 khz : 24/F(kHz) at 3 meters for 49 khz < F 1.75 MHz : 24/F(kHz) at 3 meters for 1.75 MHz < F 3 MHz : 29.5 /m at 3 meters for 3 MHz < F 88 MHz : 4 /m at 3 meters for 88 MHz < F 216 MHz : 43.5 /m at 3 meters for 216 MHz < F 96 MHz : 46 /m at 3 meters Above 96 MHz : 54 /m at 3 meters Note: any spurious which has more than 2 db of margin compared to the applicable limit is not necessarily reported. Test conclusion: RESPECTED STANDARD End of report, 3 appendixes to be forwarded Page 28 out of 34

29 APPENDIX 1: Photos of the equipment under test Page 29 out of 34

30 Page 3 out of 34 RR A Ed.

31 APPENDIX 2: Test set up Page 31 out of 34

32 Page 32 out of 34 RR A Ed.

33 Page 33 out of 34 RR A Ed.

34 APPENDIX 3: Test equipment list Conducted limits TYPE MANUFACTURER EMITECH NUMBER Outside room Hors cage Emitech 8893 Satellite synchronized frequency standard ACQUISYS 8896 GPS8 Test receiver HP 8591EM Hewlett Packard 8524 LISN 16 Thurbly Thandar Instruments 8719 High-pass filter EZ-25 Rohde & Schwarz 8635 Absorber sheath current Emitech 1651 Power source 1251RP California instruments 858 Multimeter MN512B AOIP 8675 Meteo station HUGER 8671 Software BAT-EMC V Radiated emission limits; general requirements TYPE MANUFACTURER EMITECH NUMBER Anechoic Chamber EMITECH 8593 Satellite synchronized frequency standard ACQUISYS 8896 GPS8 Spectrum Analyzer FSP4 Rohde & Schwarz 488 Loop antenna 652 EMCO 146 Biconical antenna VHBB 9124 Schwarzbeck 8526 Log periodic antenna UHALP 918A Schwarzbeck 8543 Antenna 3115 EMCO 8535 Antenna WR42 IMC 1939 Antenna WR42 IMC 194 Antenna WR28 ATM 4353 Low-noise amplifier 8447D Hewlett Packard 8511 Low-noise amplifier C218F-4B1 Microwave DB 1922 Low-noise amplifier ALN2-12 ALC Microwave 336 Low-noise amplifier ALS ALC 4354 Low pass filter WLJS8-C11/6EE Wainwright 4393 Low pass filter LP3/1-7GH Filtek 487 Low Pass Filter LPM1561 Microtronics 666 High pass filter HPM1163 Hewlett Packard 669 Reject band filter BRM572 Microtronics 7299 High pass filter HPM156 Microtronics 667 Power source 1251RP California instruments 858 Multimeter MN512B AOIP 8675 Meteo station WS-9232 La Crosse Technology 875 Software BAT-EMC V Page 34 out of 34

Certification Radio test report

RR051-16-102195-5-A Ed. 1 This report cancels and replaces the test report N RR051-16-102195-5-A Ed. 0 Certification Radio test report According to the standard: CFR 47 FCC PART 15 Equipment under test: