RF EXPOSURE REPORT. For. Model: SVI Trade Name: BOSCH

Transcription

1 IEEE C95.1 KDB D01 v06 47 C.F.R. Part 1, Subpart I, Section C.F.R. Part 2, Subpart J, Section RF EXPOSURE REPORT For Smart Home Indoor Camera Model: SVI Trade Name: BOSCH Issued for Robert Bosch Taiwan Co., Ltd. 6F, No. 90,Jian Guo N. Road, Sec.1 Taipei 10491,Taiwan Issued by Compliance Certification Services Inc. Hsinchu Lab. NO , Wenshan Rd., Shangshan Village, Qionglin Township, Hsinchu County 30741, Taiwan (R.O.C.) Issued Date: October 03, 2016 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF or any government agencies. The test results of this report relate only to the tested sample identified in this report. Page 1 of 6

2 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 10/03/2016 Initial Issue All Page Michelle Chiu Page 2 of 6

3 TABLE OF CONTENTS 1. LIMIT EUT SPECIFICATION TEST RESULTS MAXIMUM PERMISSIBLE EXPOSURE... 6 Page 3 of 6

4 1. Limit According to (i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See (b)(1) of this chapter. 2. EUT Specification Product Name Model Number Identify Number Smart Home Indoor Camera SVI T160226D04 Received Date February 26, 2016 Frequency band (Operating) Device category Exposure classification Antenna Specification Maximum average output power b/g/gn HT20 Mode: 2412MHz ~ 2462MHz Mobile (>20cm separation) Evaluation applied MPE Evaluation* Occupational/Controlled exposure (S = 5mW/cm 2 ) General Population/Uncontrolled exposure (S=1mW/cm 2 ) PCB Antenna 1, Antenna Gain : 0.9dBi IEEE b Mode: dbm IEEE g Mode: dbm IEEE gn HT20 MCS0 Mode: dbm Remark: 1. For more details, please refer to the User s manual of the EUT. 2. This submittal(s) (test report) is intended for filing. Page 4 of 6

5 3. Test Results No non-compliance noted. Calculation Given Where P G E = 30 & d P = Power in Watts 2 E S = 3770 E = Field strength in Volts / meter G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 30 P G S = d Changing to units of mw and cm, using: P (mw) = P (W) / 1000 and d (cm) = d(m) / 100 Yields ( P /1000) G P = ( d /100) d 30 G S = Equation Where P = Power in mw d = Distance in cm G = Numeric antenna gain S = Power density in mw / cm 2 Page 5 of 6

6 4. Maximum Permissible Exposure Substituting the MPE safe distance using d = 20 cm into Equation 1: S = P G Where P = Power in mw G = Numeric antenna gain S = Power density in mw / cm 2 Mode Frequency (MHz) Power (dbm) Ant. Gain (dbi) Distance (cm) Power density (mw/cm 2 ) Limit (mw/cm 2 ) IEEE b IEEE g IEEE gn HT20 MCS Page 6 of 6