SFP-100WB20-T 100BASE-BX-OLT Transceiver

Transcription

1 SFP BIDI, Single LC Connector, 1550nm FP LD for Single Mode Fiber, ohs Compliant Features ohs Pb Applications Fast Ethernet FDDI AM/SONE OC-3/SDH SM-1 Single mode fiber links Optical-Electrical Interface Conversion 1550nm FP LD Data ate: 125~155Mbps, NZ Single +3.3V Power Supply ohs Compliant and Lead-free AC/AC Differential Electrical Interface Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP) Single LC Connector Compliance with specifications for IEEE-802.3ah 100BASE-BX10-D Compliance with FDDI PMD Standard Compliance with AM Standard Description he SFP-100WB20- from AAXEON is the high performance and cost-effective module for serial optical data communication applications specified for single mode of 125 Mb/s. It operates on +3.3V power. he module is intended for Single-mode fiber, operates at a nominal wavelength of x: 1550nm / x: 1310nm, and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of a bi-directional optical subassembly that combines a transmitter with a receiver and an electrical subassembly. All are housed in a metal package and the combination produces a reliable component. he module is a single fiber connector transceiver designed for use in Ethernet applications and to provide IEEE-802.3ah compliant link for 125Mb/s intermediate reach applications. he characteristics are performed in accordance with elcordia Specification G-468-COE. EMC Most equipment utilizing high-speed transceivers will be required to meet the following requirements: 1) FCC in the United States 2) CENELEC EN55022 (CISP 22) in Europe o assist the customer in managing the overall equipment EMC performance, the transceivers have been designed to satisfy FCC class B limits and provide good immunity to radio-frequency electromagnetic fields. Eye Safety he transceivers have been designed to meet Class 1 eye safety and comply with EN Page 1 of 5

2 Product Information Operating Voltage LD ype & Model Number Distance Output Power Sensitivity & SD Output Wavelength SFP-100WB20-3.3V L AC/AC 20 km 1550 nm FP / 1310 nm -14 ~ -8 dbm -32 dbm ABSOLUE MAX AINGS PAAMEE SYMBOL MIN MAX UNI NOE Storage emperature S C Supply Voltage V CC 0 6 V Data Input Voltage V OPEAING CONDIIONS PAAMEE SYMBOL MIN. YP. MAX. UNI NOE Case Operating emperature A C Supply Voltage V CC V Data Input Voltage Swing V ID mv ELECICAL CHAACEISICS PAAMEE SYMBOL MIN MAX UNI NOE ransmitter ransmitter Supply Current I CC 200 ma x_ Disable Input Voltage - Low V IL V x_ Disable Input Voltage - High V IH 2.0 V x_ Fault Output Voltage - Low V OL V x_ Fault Output Voltage - High V OH 2.0 V eceiver eceiver Supply Current I CC 100 ma eceiver Data Output Differential Voltage V OD V x_los Output Voltage - Low V OL V x_los Output Voltage - High V OH 2.0 V MOD_DEF (1), MOD_DEF (2) - Low V IL V MOD_DEF (1), MOD_DEF (2) - High V IH V ANSMIE ELECO-OPICAL CHAACEISICS PAAMEE SYMBOL MIN YP. MAX UNI NOE Optical Output Power Po dbm 1 Extinction atio E 8.2 db Center Wavelength λ c nm Spectral Width (MS) Δλ 4 nm Optical ise time ( 10%-90% ) t r 2.0 ns Optical Fall time ( 10%-90% ) t f 2.0 ns Output Eye Compliant with IEEE802.3ah and IU recommendation G.957 Page 2 of 5

3 ECEIVE ELECO-OPICAL CHAACEISICS PAAMEE SYMBOL MIN YP. MAX UNI NOE Maximum Input Optical Power P max -3 dbm 2 eceiver Sensitivity P min -32 dbm 2 Operating Wavelength λ nm Optical eturn Loss OL 14 db Loss of Signal - Asserted P A -45 dbm Loss of Signal - Deasserted P D P A dbm Loss of Signal - Hysteresis P D - P A db Notes: 1. Measured average power coupled into 9/125μm single mode fiber. 2. Measured with PBS at BE<10-10 and 155Mbps. IMING CHAACEISICS PAAMEE SYMBOL MIN YP. MAX UNI NOE X_DISABLE Assert ime t_off 10 μs X_DISABLE Negate ime t_on 1 ms ime to initialize, include reset of X_FAUL t_init 300 ms X_FAUL from fault to assertion t_fault 100 μs X_DISABLE time to start reset t_reset 10 μs eceiver Loss of Signal Assert ime (off to on) eceiver Loss of Signal Assert ime (on to off) t A,X_LOS 100 μs t D,X_LOS 100 μs BLOCK DIAGAM OF ANSCEIVE Electrical Sub-assembly D+ D- LD Driver WDM Optical Sub-assembly X Disable X Fault FP-LD MOD_DEF Post- (0) (1) (2) D+ D- Pre- Single LC eceptacle Connector X_LOS Page 3 of 5

4 PIN OU DIAGAM OF ANSCEIVE D- 2 x Fault 18 D+ 3 x Disable 17 4 MOD-DEF2 16 V CC 5 MOD-DEF1 15 V CC 6 MOD-DEF ate Select 13 D+ 8 LOS 12 D op of Board Buttom of Board (As Viewed through op of Board PIN OU ABLE Pin Symbol Functional Description 1 Vee ransmitter Ground 2 X Fault ransmitter Fault Indication 3 X Disable ransmitter Disable Module disables on high or open 4 MOD-DEF(2) Module Definition 2 wo wire serial ID interface 5 MOD-DEF(1) Module Definition 1 wo wire serial ID interface 6 MOD-DEF(0) Module Definition 0 Grounded in module 7 ate Select Not Connected 8 LOS Loss of Signal 9 Vee eceiver Ground 10 Vee eceiver Ground 11 Vee eceiver Ground 12 D- Inverse eceived Data Out 13 D+ eceived Data Out 14 Vee eceiver Ground 15 eceiver Power 16 ransmitter Power 17 Vee ransmitter Ground 18 D+ ransmitter Data In 19 D- Inverse ransmitter Data In 20 Vee ransmitter Ground Page 4 of 5

5 ECOMMENDED CICUI SCHEMAIC V CC x Fault x Disable LD Driver 100 D+ D- V CC V CC D- L1 C2 L2 C3 C1 System Pre Post D+ 100Ω X_LOS EEPOM MOD-DEF(2) MOD-DEF(1) MOD-DEF(0) Note : 4.7KΩ < < 10KΩ L1, L2 = 1mH C1 =10mF C2, C3 = 0.1mF MECHANICAL DIMENSIONS Units in mm All dimensions are ±0.2mm unless otherwise specified. Page 5 of 5