AWWA. Electric Actuators C XC Series CSA Explosion Proof CSA Approved TYPE 4, 4X, 6 & 7 IP67

Transcription

1 AWWA C TYPE 4, 4X Electric Actuators WE Series Weatherproof CSA Approved TYPE 4 & 4X IP67 KE Series Weatherproof IP67 XE Series Explosion Proof ATEX/IECEx Certified Ex d IIB T4 Gb IP67 ATEX II 2 G Ex d IIB T4 Gb XC Series CSA Explosion Proof CSA Approved TYPE 4, 4X, 6 & 7 IP TYPE 4, 4X, 6 & 7

2 XC Series TYPE 4, 4X, 6 & 7 CSA Certification Class I, Division 1, Groups C, D T4 Ex d IIB T4 Gb Class I, Zone 1, AEx d IIB T4 Gb TYPE 4, 4X, 6 & 7, IP66/IP67 Triac XC Series Actuators Standard Features Visual position indicator Torque switches (XC01350 XC25900) Anticondensation heater and thermostat Two auxiliary limit switches Selflocking gear train Manual handwheel with torque from 690 inlbs to inlbs Available motor voltages: 12VDC, 24VDC, 24VAC, 120VAC & 220VAC Optional proportional control Various inputs with feedback available See How To Order XC Series on page 4 The Triac XC Series Actuators are CSA Certified Type 4, 4X, 6 & 7 for hazardous locations and meet UL 1203 standard. The actuators are rugged and reliable with powder coated anodized aluminum housing for use in Oil, Gas, Chemical & Power Gen applications. The XC Series is the perfect match for resilient or highperformance butterfly valves and dampers because of the selflocking, double reduction worm drive and torque switches. The XC Series is also ideal for ball, plug or any rotary valve requiring automation in a hazardous location. Actuator Model XC 110 VAC Output Torque 90 Cycle Time (sec) Full Load Amps (FLA) Locked Rotor Amps (LRA) Duty Cycle* InLbs 60Hz 60Hz 60Hz/ DC 220 VAC 24V AC/DC 12 VDC 110 VAC 220 VAC 24V AC/DC DC 60Hz 60Hz 60Hz/ DC 12 VDC 110 VAC 220 VAC 24V AC/DC DC 60Hz 60Hz 60Hz/ DC 12 VDC 110 VAC 220 VAC 24V AC/DC DC S4 (IEC ) % 40% 30% 30% % 40% 30% 30% % 35% 40% % 35% 40% % 40% 35% % 30% % 30% % 30% % 30% % 30% *DUTY CYCLE: FULL LOAD WITH 158 F AMBIENT TEMP 12 VDC 110 VAC 220 VAC 24V AC/DC 12 VDC Handwheel Turns Lbs 2

3 XC Series ELECTRIC ACTUATORS Dimensional Drawings XC00690, 00860, 01350, 01700, 02640, 04400, 06900, ØC 4 A * B ØC 4 A * B H X I J K Y L Q ØC D 3/4" NPT CONDUIT CONNECTION (2) PLACES R N M Z % P G S F10 F07 D 4 A * B H X I J K Y L 3/4" NPT CONDUIT CONNECTION (2) PLACES Q M Z P E N C AUTO HAND OP L O S E G LOCK HOLE N XC17500, F E O XC SERIES Dimensions (IN) Model XC ISO 5211 F ØE A B C D sq E F G H I J K L M N O P Q R S X Y Z F07 M F07 M F07/F10 M8/M / / F07/F10 M8/M / / F10/F12 M10/M / / F10/F12 M10/M / / F14 M F14 M F16 M F16 M

4 How to order XC Series TRIAC XC Series CSA Approved Explosion Proof Actuators Part Number Reference Series XC Explosion Proof, CSA Class I, Division 1, Groups C, D; T4 Type 4, 4X, 6 & 7, IP66/IP67 Ex d IIB T4 Gb Class I, Zone 1, AEx d IIB T4Gb Control Blank (2) Position Control (Open / Close) D TDC Modulating Card (Provides 450 points of resolution) (Sizes ) TYPE 4, 4X, 6 & 7 Actuator Output Torque Size 110 VAC 220 VAC 24V AC/DC 12 VDC ,350 1,350 1, ,700 1,590 1, ,640 2,300 2, ,980 3, ,900 6, ,600 8, ,500 17, ,900 25,900 Motor X 110VAC/1PH A 24V AC/DC (Sizes ) B 12VDC (Sizes & 00860) C 24VDC XCD models only (Sizes ) D 24VAC/1PH XCD models only (Sizes ) E 220VAC/1PH Miscellaneous Options Blank No options T 420mA Transmitter Y 180º Operation Note: Add all miscellaneous options to end of part number Note: Class 1, Division 2 areas require a certified sealoff fitting during installation Example XC01350X Triac Explosion Proof Electric Actuator, 1350 InLbs (150Nm), 21 Second Operation, 110VAC/1PH, 5060Hz, 2 FLA, Two Position Control, ISO Mounting, 10 Watts Compartment Heater & Thermostat, (2) Auxiliary Limit Switches with Independent Cams, (2) Torque Switches, Diecast Anodized Aluminum Polyester Coated Construction, Class F Extended Duty Fan Motor, Manual Override, (2) 3/4 NPT Conduit Connections, F07/F10 ISO Mounting Pad, 19MM (0.748) Star Output Drive, ccsaus Approved Class I, Division 1, Groups C, D; T4, Ex d IIB Gb T4, Class I, Zone 1, AEx d IIB Gb T4, Type 4, 4X, 6 & 7, IP66, IP67, Ambient Temp = 20 C to +60 C Color Silver 4 AT Controls reserves the right to change product designs and technical/dimensional specifications without notice. See website for updates.

5 KE Series ELECTRIC ACTUATORS Triac KE Series Actuators Standard Features Convex lens visual position indicator makes it easier to observe without water collecting on the surface of the indicator Anticondensation heater and thermostat Two auxiliary limit switches Selflocking gear train Manual override with wrench Available motor voltages: 12VDC, 24VDC, 120VAC & 220VAC Optional 420mA & 010 VDC proportional control % duty cycle The Triac KE Series electric actuators are the perfect match for resilient or highperformance butterfly valves and dampers because of the selflocking worm drive. The KE Series actuators are used to control rotary valves, such as butterfly valves, ball valves, plug valves, etc. Widely used in applications such as petroleum, chemical, water treatment, ship, paper, power stations, heating supply, building automation, light industry etc. Unique low profile actuator, ideal for tight spaces 5

6 KE Series Dimensional Drawing KE440 to 3500 A B C 2.40 OPTIONAL MODULATING CONTROL MODULE BC2 BOLT CIRCLE BC1 BOLT CIRCLE T1 THREAD D1 DEEP D E A T2 THREAD D2 DEEP G F KE SERIES Dimensions (IN) Mounting Pad Model A B C D E ISO 5211 F G BC1 BC2 T1 D1 T2 D2 KE F05/F x 0.67 Deep M6 x M8 x KE F05/F x 0.89 Deep M6 x M8 x KE F10/F x 1.28 Deep M10 x M12 x KE F10/F x 1.28 Deep M10 x M12 x KE Motor Technical Data 6 Actuator Model Output Torque 90 Cycle Time (sec) Rated Current AC DC DC 1 Phase InLbs Nm 50 Hz 60 Hz 12V 24V 12V 24V 110VAC 220VAC KE KE KE N/A 20 N/A KE N/A 30 N/A Lbs

7 KE Series ELECTRIC ACTUATORS KE Series Actuators sight glass sight glass cover motor indicator dial motor end cap rotor spindle body Convex lens visual position indicator terminal board transmission gears gear box cover worm worm gear output shaft bearing 420mA/010 VDC Modulating Control Module TRIAC KE Series Electric Actuator Part Number Reference Model KE WeatherProof IP67 Electric Actuator Control Blank M (2) Position Control (Open / Close) Standard Modulating Control Module (420mA / 010 VDC Input/Output) Actuator Sizes (KE) Size InLbs InLbs InLbs InLbs Motor X 110/120VAC/1PH Place holder Omit when at end of part number B 12VDC (440 & 880 models only) C 24VDC E 220VAC/1PH Example KEM880 Triac Worm Drive Electric Actuator, WeatherProof IP67, 880 InLbs Torque Output, 13 Sec Cycle Speed, 110VAC/1PH, 0.75 Rated Amps, Modulating Control, (2) Auxiliary Limit Switches, Heater & Thermostat, Diecast Aluminum Powder Coated Construction, Manual Override with Wrench, (2) ½ NPT Conduit Entries, F05, F07, F10 Mounting Pad, (17MM) Star Output Drive AT Controls reserves the right to change product designs and technical/dimensional specifications without notice. 7

8 WE Series WE350 The WE350 Electric Actuator is specifically designed to operate small size ball valves (1 and less), dampers and other quarterturn devices. Features Compact and light weight High resistance to corrosion due to hard anodizing on inside and outside with polyester powder coating on external surface Multivoltage (85265VAC/1PH, 24VDC) Standard space heater (0.5W) Weather proof (IP67) Push Button and Manual lever Wide, easy mounting base standard to ISO 5211 (F03/F04/F05) Standard four limit switches (2) aux limit switches Captive cover bolts Mechanical position indicator & LED lamp indicators (Open/Close) Construction Manual Push Button Cable entry & Cable 24 AWG, 11 conductor 17mm dia. Standard Wire length: 47¼ w PG11 CABLE GLAND Full close lamp (blue) Full open lamp (red) Indicator Main board 4 Limit Switches Aux. Close Limit Switch (ACLS)Black Aux. Open Limit Switch (AOLS)White Close Limit Switch (CLS)Green Open Limit Switch (OLS)Red 4 Captive cover bolts Manual lever holder 8 Mounting base (ISO 5211) F03, F04, F05

9 WE350 E L E C T R I C A C T U A T O R S Performance Type (Model) Maximum Output Torque Operating Time 60/50 Hz Mounting Size ISO 5211 InLbs. 90 WE sec. WE350HS sec. F03/F04/F05 Supply Power & Rated Current (A) 60/50Hz, 1 Phase 110VAC 220VAC 24VDC Duty Cycle IEC341 S4 70% Manual Level Angle Weight Lbs. Dimensions Wire: 471/ M5 TAP D.P12 Ø42(DIN 3337 F04) M5 TAP D.P12 Ø36(DIN 3337 F03) M6TAP DP12 Ø50(DIN 3337 F05) M8 TAP FEMALE OUTPUT DRIVE (11MM) x 0.47 (12MM) DEPTH 2.17 Wiring Connection MAIN POWER (AC or DC) AC 85~265VAC DC 24 VDC/3A + COM YEL ORA BLA RED BLU SKY BLUE COM WHI BRO GREY PUR GRE SMPS +24VDC 15mA MAIN PCB 9

10 WE/XE Series WE/XE500 The WE500 and XE500 Electric Actuators have a compact design ideal for use with small ball valves (2 and less), dampers and other quarterturn devices. Each actuator includes a visual indicator, two auxiliary switches and a compartment heater. A convenient wrench manual override shaft is standard. This actuator is the clear choice when a compact, efficient electric actuator is required! Standard Features Compact and light due to high grade aluminum alloy housing. High resistance to corrosion due to hard anodizing on inside and outside with polyester powder coating on external surface Output torque: 530 Inlbs. Reversible, high torque and low current motor Enclosure: Weatherproof (IP67, Type 4, 4X) or Explosion Proof (ATEX/IECEx Ex d IIB T4) Captive cover bolts Terminal block (11P) Performance Type (Model) Maximum Output Torque Operating Time 60/50 Hz Optional Configurations Motor Size Position Indication Unit (Potentiometer kit) Standard Specifications Full Load Amps Locked Rotor Amps Duty Cycle AC 1PH. 50/60Hz AC/DC AC 1PH. 50/60Hz AC/DC IEC 341 High resolution potentiometer with precisely machined gearing directly engaged with drive shaft provides continuous monitoring of position of valve and actuator. Enclosure Weatherproof (IP67, Type 4, 4X) or Explosion Proof (ATEX/IECEx Ex d IIB T4) Power Supply 110/220V AC 1PH, 50/60Hz, ± 10%, 24V AC/DC Duty cycle IEC S4, 70% Motor Limit switches Class F Reversible motor (2) Operational & (2) Auxillary, Open / Close, SPDT, 16A 1/2HP 125/250VAC, 0.6A 125VDC, 0.3A 250VDC Space heater 2W (110/220V AC) Anticondensation Manual override Drive Nut (4mm hex) Cable conduit Two 1/2 NPT Movement angle 320º ±10º Ambient temperature 4ºF 158ºF (optional 40ºF Low Temp Kit) External coating Polyester powder coating Mounting ISO 5211 (F03/F05/F07) Number of Handle Turns InLbs. 90 Watts 110V 220V 24V 110V 220V 24V S4 N Lbs. WE / % 8 XE Weight AC/DC 24V Control Unit Dip Switch Mode 1 2 DC ON OFF AC OFF ON (setting shown here applies to WE/XE500A only) TMC3 Electronic Modulating Card For WE Series only; See details on page 16 10

11 WE/XE500 ELECTRIC ACTUATORS Dimensions WE500 CSA Approved, Type 4 & 4X IP67 CONTROL BOX FOR MODULATING CARD XE500 ATEX/IECEx Ex d IIB T4 Gb, IP67 11

12 WE/XE Series Electric Actuators WE/XE Features Window cover Window Actuator Cover High corrosionresistance due to anodizing on the inside and outside and polyester powder coating on the outside Position indicator Option: illuminated red (close), green (open), yellow (over torque) Motor Available in 1 Phase / 3 Phase, all motors are custom built for hightorque, low current draw and the highest duty cycle ratings offered. Fan Cooled Motor is standard on model WE/XE 690 and larger. Limit Switch & Auxiliary Switch Set (standard) Terminal Block Capacitor Close Cam Open Cam Actuator Body Manual Handwheel Mechanical Stops (rear side) Dual Conduit Connection (rear) Torque Switch System (except WE/XE690) Easy Mounting Base ISO 5211 standard Heater and Thermostat Manual Override Double reduction worm gear assembly is selflocking with minimum blacklash. 12

13 WE/XE Series ELECTRIC ACTUATORS WE/XE690 thru WE/XE25900 Terminal block Extra terminals for customer s convenience Spring Loaded Terminal Strip provides secure connection Heater Ceramic housing with thermostat to eliminate condensation (710 watt Standard) Optional High Wattage Heater for Low Temp applications to 40 F Captive cover bolt Cover bolts are specially designed to prevent loosening during maintenance or installation All external bolts are stainless steel for rust prevention Indicator sustained by spring Direction of visual indicator is set by factory To change its direction, simply grip the indicator plate and rotate to the new position Spring beneath the indicator plate sustains the set position No need to loosen screw and tighten it again Slot on window cover for draining water A drain slot is provided to eliminate water buildup on window Removable Drive Bushing Easily change drive size 13

14 WE/XE Series WE/XE Series WE CSA Approved, Type 4 & 4X, IP67 XE ATEX/IECEx Ex d IIB T4 Gb, IP67 SE Type 4, 4X & 6, IP68 Acutator Output 90 Cycle Motor Full Load Amps Locked Rotor Amps Duty Handwheel Models Torque Time (sec) Size AC/DC 1 Phase 3 Phase AC/DC 1 Phase 3 Phase Cycle Turns Weight WE / XE InLbs. 60 / 50 Hz Watts 24V 110V/60Hz 220V/60Hz 380V 440V 24V 110V/60Hz 220V/60Hz 380V 440V IEC 341 S4 N Lbs / N/A N/A N/A N/A 70% / % / % / % / N/A N/A % / N/A N/A % / N/A N/A % / N/A N/A % / N/A N/A % / N/A N/A % Standard Specifications 14 Enclosure Series WE Weatherproof, CSA Type 4, 4X, IP67 Series XE Explosion(Flame) Proof, ATEX/IECEx Ex d IIB T4 Gb, IP67 Series SE Submersible, Type 4, 4X, & 6, IP68, 10m for 72hr AWWA Conforms to AWWA C54093 requirements Power supply 12/24VDC, 24/110/220VAC 1PH, 220/380/440/460/480VAC 3 PH, 50/60Hz, ±10% Duty cycle 1800 start/hour at full load at 25 C (77 F) Motor Class F Reversible Induction motor Limit switches Open / Close, SPDT, 16A 1/2HP 125/250VAC, 0.6A 125VDC, 0.3A 250VDC; (2) Operational & (2) Auxillary Torque switches Open / Close, SPDT, 16A 1/2HP 125/250VAC, 0.6A 125VDC, 0.3A 250VDC (except size 690) Stall protection Builtin thermal protection, Open 302ºF (150ºC) / Close 207ºF (97ºC) Travel angle 0 to 90º ± 10º / 0 to 270 ± 10º Indicator Continuous position indicator Manual override Declutching mechanism Self locking Provided by double worm gearing Mechanical stopper Open / Close (external adjustable screws) Space heater 710W Anticondensation Cable Conduit Two 3/4 NPT Lubrication Grease moly (EP type) Terminal block Spring loaded lever push type Materials Steel, Aluminium alloy, AI bronze, Polycarbonate Ambient temperature Standard: 4ºF 158ºF Explosion Proof standard: 4ºF 140ºF Ambient humidity 90% RH Max. (noncondensing) AntiVibration XYZ 10g, 0.2~34Hz, 30 minutes External coating Anodizing treatment before dry powder, Polyester

15 WE & XE Series ELECTRIC ACTUATORS Options Option WE XE SE Available Models Explosion Proof Enclosure (ATEX/IECEx II 2 G, Ex d IIB T4 Gb, IP67) X 500 to Submersible Enclosure (Type 4, 4X & 6, IP68, 10m for 72hr) X 690 to Potentiometer Unit (1kΩ to 10kΩ) X X X 500 to (TMC3) Electronic Modulating Card; WE500 to X X X 420mA, 15mA, 010VDC, 15VDC, 0135Ω command signal XE/SE1350 to (TDC) High Resolution Electronic Modulating Card; WE500 to X X X 420mA, 15VDC, 05VDC, 010VDC command signal XE/SE1350 to Local Control Unit (local/remote control) X 500 to SemiIntegral Control Unit (local/remote control with feedback) X 1350 to Intelligent Digital Control Unit (local/remote control with feedback and digital LCD display) X 1350 to Current Position Transmitter (420mA output) X X X 500 to Low Temp Kit (40 F) X X X 500 to V AC/DC Control X X X WE/XE500A to 2640A SE690A to 2640A DC Motor (24VDC) X X X WE/XE500C to 2640C SE690C to 2640C Rotation 120, 180, 270 turn X X X 690 to Visual LED Indicator (open, close, power, torque) X X X 1350 to FireProof Covering (1050 C ± 5 C for 50 min) Consult Factory for FE Series FireProof Covering (250 C ± 5 C for 150 min) Consult Factory for FE Series ATEX II 2 G Ex d IIB T4 Gb Enclosure Ratings Series WE Weatherproof, CSA Type 4, 4X, IP67 Series XE Explosion(Flame) Proof, ATEX/IECEx Ex d IIB T4 Gb, IP67 Series SE Submersible, Type 4, 4X, & 6, IP68, 10m for 72hr Wiring Diagram References XE Explosion Proof Enclosure ATEX/IECEx Certification Signal LED Unit Large indicator with monitoring lamps (Over torque, open and close) High Speed Electric Actuators Model Description Drawing Output Speed Torque Switch WE500 WE500A 115 VAC/1 Phase, Two Position 24 VAC/24 VDC, Two Position SE 1010 SE 1168/SE 1130 Model Torque (InLbs) (60Hz) (seconds) Setting (InLbs) WEM VAC/1 Phase, Modulating WE690*HS N/A SE 1085 with TMC3 Servo Card WE690*HS N/A WE VAC/1 Phase, Two Position SE 1032 WE1350*HS , VAC/1 Phase, Modulating WEM690 SE 1235 WE1350*HS1 1, ,350 with TMC3 Servo Card WE2640*HS2 1, ,640 WE/XE1350 thru VAC/1 Phase, Two Position SE 1080 WE/XE1350A thru 2640A 24 VAC/24 VDC, Two Position SE 1221/SE 1220 WE2640*HS1 2, , VAC/1 Phase, Modulating WE4400*HS2 2, ,400 WEM/XEM1350 thru SE 1052 with TMC3 Servo Card WE4400*HS1 3, ,400 Digital Control Unit 3 Phase/Modulating SE 1222 WE6900*HS2 4, ,900 Digital Control Unit 3 Phase/Two Position SE 1301 WE10500*HS1 6, ,500 SemiIntegral Unit 1 Phase/Proportional SE 1176 WE17500*HS2 12, ,500 SemiIntegral Unit 1 Phase/Two Position SE 1097 WE25900*HS1 18, ,900» See to download specific wiring diagrams (Download > Sort by Document Type > Electric Schematic) Motor specifications remain the same. *Must specify voltage see part number matrix on pg 22 15

16 Options Modulating Options for WE500 thru Modulating Cards TMC3 Electronic Modulating Card (120/220VAC) Auto Calibration for Easy Setup 10 Bit Microprocessor controller for precise positioning and control 420mA, 15mA, 010 VDC, 15 VDC, 0135 Ohm or Command Signal Potentiometer TMC3 Can be programmed to Fail in Place, Fail CW, or Fail CCW on loss of command signal Characterized ControlLinear, quick opening (Square root), or Equal Percentage (Square) OnBoard 420 ma transmitter (standard) TDC Electronic Modulating Card (12/24VDC, 24/120/220 VAC) 450 Point Resolution, 16 Bit Micro Processor Auto Calibration Adaptive Control Feature (continuously adjusts for load and actuator conditions and positions to ±0.1 ) Dynamic Breaking 420mA, 15V, 05V, 010V Programmed to Fail in place, Fail CW, or Fail CCW on loss of command signal 420mA Feedback Transmitter (Optional) EPC Electronic ASi Network Card ASi Version VAC or 24VDC Power Emergency OverrideNormal Operation is overridden when actuator is driven to either CW or CCW position on command Built in Emergency Position Command (EPC) overrides normal operation and automatically operates the valve into either the open or closed position (normally this is the closed position) as defined in the user specifications Signal Sentinel continuously monitors the EPC system offering additional failsafe backup in the event of an unexpected local event Boiler Feedwater Application WEL Control signal 420mA, specify these parts: LRC101, POT102 & Extended Bracket. WES Control signal 0135 ohm, specify these parts: TDC100, XMA108, POT102 & Extended Bracket Logarithmically averages rapidly changing signals to reduce unneccessary hunting for position. 16 Other Network Cards Available Upon Request

17 Options ELECTRIC ACTUATORS Special Application Intelligent Digital Control Unit Light, compact and integral design Wide range of electric power application (220VAC~480VAC/3 Phase) Builtin auto phase discriminator (easy and convenient wiring) Digital indicator with number, bar graph, menu and (3) LED lamps Separate terminal chamber (Reliable against water, vibration, temperature, etc.) Easy application for WESeries Actuators Various options available SemiIntegral Control Unit Light, compact and integrated design (IMS, Local/Remote control) Wide range of electric power application (115VAC~480VAC/1 Phase or 3 Phase) Phase protection monitoring by LED in case of reverse wiring Easy application for WESeries Actuators Various options available LED lamp signal White Blue Yellow Red Green :Power :Remote :Fault :Open/Opening :Close/Closing 17

18 WE & XE Series Dimensional Drawing WE/XE690, 1350, 1700, 2640, 4400, 5200, 6900, ØC ØC 3.01 Control Box for Modulating Card (Size 690 Only) D 3/4" NPT CONDUIT CONNECTION (2) PLACES WE/XE17500, Y X 4A*B I K J L Q H ØC 40 Z N M 3/4" NPT CONDUIT CONNECTION (2) PLACES D % P 0 F G S R Dimensions (IN) Model WE/XE ISO 5211 A ØE B C D sq E F G H I J K L M N O P Q R S X Y Z F07 M F07/F10 M8/M / / F07/F10 M8/M / / F10/F12 M10/M / / F10/F12 M10/M / / F10/F12 M10/M / / F14 M F14 M F16 M F16 M

19 WE Series ELECTRIC ACTUATORS Dimensional Drawing WE1350, 1700, 2640, 4400, 5200, 6900, Intelligent Digital Control Unit ØC 4 A * B ØC 4 A * B X Y D H I J K L Q F12 F P AUTO HAND LOCK HOLE OP N E C L OS E N M Z 3/4" NPT CONDUIT CONNECTION (2) PLACES G F E DIA. O WE17500, Intelligent Digital Control Unit 4 A * B X Y 6.06 H I J K L Q ØC D N Z M % P 3/4" NPT CONDUIT CONNECTION (2) PLACES F G S R ØE Dimensions (IN) Model ISO WE 5211 A B C D sq E F G H I J K L M N O P Q R S X Y Z 1350 F07/F10 M8/M / / F07/F10 M8/M / / F10/F12 M10/M / / F10/F12 M10/M / / F10/F12 M10/M / / F14 M F14 M F16 M F16 M

20 WE Series Dimensional Drawing WE1350, 1700, 2640, 4400, 5200, 6900, ØC 4A*B Re 4A*B Lo F10 F07 ØC S T O P Semiintegral Control Unit Y X' W D I H VIEW U Q 3/4" NPT CONDUIT CONNECTION (2) PLACES L K J P M U Z N G HAND E OP OS EN CL AUTO LOCK HOLE F E WE17500, O Semiintegral Control Unit 4A*B Y X' H I K J L Q W Re Lo S T O P ØC VIEW U % P U Z N M D 3/4" NPT CONDUIT CONNECTION (2) PLACES F G S R ØE Dimensions (IN) Model WE ISO 5211 A B C D sq E F G H I J K L M N O P Q R S X Y Z F07 M F07/F10 M8/M / / F07/F10 M8/M / / F10/F12 M10/M / / F10/F12 M10/M / / F10/F12 M10/M / / F14 M F14 M F16 M F16 M See wiring drawings reference on page 15 or call factory for special requests.

21 WE53000 & WE80000 E L E C T R I C A C T U A T O R S Technical Information Acutator Model Rated Current(A) 60Hz Output Torque 90 Cycle Time Mounting Size 1 Phase InLbs 60/50Hz ISO V 149 sec. F25/30* WE WE Phase 380V 440V Motor Insulation Class Maximum Bore Size (mm) Duty Cycle AC 1PH 50/60Hz Key (ø) Square ( ) S2 F % Number of Weight Handwheel Turns Lbs *Four mounting holes only Standard Specifications Enclosure Power Supply Duty Cycle Weatherproof enclosure IP67, Type 4, 4X & 6, Oring Sealed 220VAC/1PH/60Hz, 380/440/VAC/3Ph/60Hz ± 10%, 24VDC 30% Features Motor Squirrel Cage induction motor Aux. Limit Switches 2 each for Open/Close, SPDT, 250 VAC, 10A Rating Torque Switches 1 each for Open/Close, SPDT, 250 VAC, 10A Rating Space Heater 5W (220VAC) Anticondensation Manual Override Declutchable Cable Conduit Two 3/4 NPT Movement Angle 90º ± 5º Ambient Temperature 4ºF to 158ºF (optional 40ºF Low Temp Kit) Ambient Humidity 90% RH Max (NonCondensing) Position Indicator Continuous mechanical indicator with arrow Self Locking Provided by double worm gearing (no brake) Mechanical Stopper 1 for each travel end (open/close), external & adjustable Stall Protection / Set Temp Terminal Block Built in thermal protection, Open 302ºF (150ºC) / Close 207ºF (97ºC) Spring loaded lever push type Eternal Coating Polyester powder coating Lubrication EP type grease AntiVibration XYZ 10g, 0.2~34Hz, 30 minutes 8.86 Dimensions 21

22 TRIAC WE / XE Series Part Number Reference How to order WE/XE Series Model WE XE FE SE Weather Proof, CSA TYPE 4, 4X, IP67 Explosion Proof Design, ATEX & IECEx Ex d IIB T4 Gb, IP67 Fire Proof Unit (1050ºF for 50 Min) Submersible unit (IP68, 10 meters for 72 Hours) Control Blank (2) Position Control (Open / Close) M Standard Modulating Control Card (TMC3) with 420mA transmitter D High Resolution Modulating Card (TDC) (TDC100 or TDC400; see Misc. Options for transmitter) P Profibus DP On/Off R Modbus RTU (RS485) On/Off L S Boiler Feed (420mA) Boiler Feed (0135ohm) TSM extension recommended TSM extension recommended Actuator Size InLbs 350HS 270 InLbs InLbs InLbs InLbs InLbs InLbs InLbs InLbs InLbs InLbs InLbs InLbs InLbs InLbs Motor X 115VAC/1PH Place holder only Omit when at end of part number A 24 VDC/VAC On/Off (Sizes ) B 12VDC (XE690 only) C 24VDC WED/XED/SED models only (Sizes ) C2 24VDC 3 wire On/Off ((Sizes ) D 24VAC/1PH WED/XED/SED models only (Sizes ) E 220VAC/1PH F 220VAC/3PH (Sizes ) G 380VAC/3PH (Sizes ) H 440/460/480VAC/3PH (Sizes ) Options X No options (Place holder only) Omit when at end of part number B Semiintegral Control Unit (1PH/3PH) (Sizes ) C Intelligent Digital Control Unit (3PH) (Sizes ) D Local / Remote Control Switches (Sizes ) E RCT Electronic Speed Control Module 115 VAC only (Sizes ) F AMI 2Wire Relay & Speed Control 115 VAC only (Sizes ) G End of travel time delay (same in both directions) HS1/HS2 See High Speed Options R 2 Wire Control, Relay 115 VAC control voltage S 2 Wire Control, Relay 24 VAC control voltage T 2 Wire Control, Relay 24 VDC control voltage Miscellaneous Options Note: Add all miscellaneous options to end of part number Blank No options T 010VDC / 420mA Transmitter (For modulating control option D ) N 1000 Ohm Potentiometer O 5000 Ohm Potentiometer P 10K Ohm Potentiometer Y 180º Operation (Sizes ) Y3P 180º Operation, 3Position Control (Sizes ) L 40ºF Low Temp Kit (Sizes ) I Visual LED Indicator (Open, Close, Power) (Sizes ) S (4) Auxillaryl limit switches (6 total) (Sizes ) Floor Drive Mounting Configuration See Floor Drive Catalog Examples WEM1350 (Weather Proof Housing, Modulating Control, model size 1350, 115VAC / 1PH) WEM1350XXT (Weather Proof Housing, Modulating Control, model size 1350, 115VAC / 1PH, 420mA Transmitter) 22 AT Controls reserves the right to change product designs and technical/dimensional specifications without notice.

23 Specials and Applied Solutions E L E C T R I C A C T U A T O R S While you have come to know AT Controls for superior service in automated valves and daytoday automation and controls, we specialize in offering solutions to your more unique and difficult applications. Listed below are some of the electric specials and solutions oriented products and services we offer. Butterfly Valve Tee Assemblies Electric Floor Damper Drive XEC Series XEC Series Actuators 12 VDC Electric Actuators for Choke Valves The Triac XEC Series electric actuators Electric come complete with a choke valve control circuit board. The circuit board is equipped with a torque limiting feature FailSafe Actuators MOMENTARY SELECTOR SWITCH to prevent damage to gear train. There is an alarm circuit to indicate a jammed MAINTAINED SELECTOR SWITCH choke. The motor is reversible. The motor and torque limiting feature ensure long operating life. Actuators include mechanical travel stops and limit switches to indicate fully opened or closed position. The Triac XEC Series electric actuators for choke valves are the preferred choice when long life 12VDC actuation is required TYPE 4 & 4X Spring Return Electric FailSafe Battery Backup Electric FailSafe Mechanical Spring Torques up to 2300 InLbs Torques up to 2640 InLbs Emergency shutdown applications 12VDC power supply 70% Duty Cycle motor Two ¾ conduit entries Class F motor insulation 4 Internal Switches (2Indication; 2Motor Control) Electronic Overtorque Limiter Pulse control signal to relays Low power consumption when not in operation Ambient temperatures: 4 F to 158 F Optional low temperature 40 F Declutchable Manual Override (10 turns for 90 ) External adjustable travel stops Selflocking, double reduction worm gear assembly with minimal back lash Anodized & polyester powder coated enclosure 12 VDC Electric Actuators for Choke Valves See these catalogs for additional offerings included in the TRIAC Electric Actuator product line: The XEC Series is our standard recommendation for use with choke valves. Please see our full product line of electric actuators for applications with other requirements. C 1 US » XE Series 12 VDC should be used instead for cases where the customer is using a valve controller (such as TotalFlow by ABB ).» XC Series (size 690) is available for applications that are required to meet CSA Approved Class I, Division 1, Groups C, D standards. Motor control board is not available in CSA model International Blvd. Cincinnati, Ohio PHONE (513) FAX (513) sales@atcontrols.com 23

24 Distributed by: Relevant Solutions relevantsolutions.com 9955 International Blvd. Cincinnati, Ohio PHONE (513) FAX (513) WE_XE_XC_KE Copyright 2013 AT Controls, Inc. LIT0021