ACCESSORIES. radio receivers and remotes.

Transcription

1 2 REMOTES & SAFETY

2 ACCESSORIES The command and safety accessories complete the installation and monitor its proper working state to give users peace of mind. The range of accessories made available by CAME meets all of the needs associated with different types of installations, in total compliance with European Standards and Regulations. radio receivers and remotes. 3

3 SAFETY ACCESSORIES Photocells PHOTOCELLS Security devices for gates in movement 001DELTA-E Pair of surface-mounted photocells complete with casing. Range 20m. Gate movement area control. Infrared beam, evenly synchronised, to offset any external disturbances of the signal. Available for the Dir series photocells are double height posts (to install where large load trucks make their passage). CAME offers the Delta series infrared beam photocells and the Delta S series with synchronised infrared High degree of protection from weather agents. 001DELTA-B Natural anodised aluminium post. H=0.5m. For DELTA-E photocells. 001DIR10 Pair of photocells. Range 10m. 001DIR20 Pair of photocells. Range 20m. 001DIR30 Pair of photocells. Range 30m. 001DIR-CG Light grey PVC post. H=0.5m. For DIR Photocells. WIRELESS PHOTCELLS Formal, elegance and technological innovation Requires no connection to the transmitter unit. and transmitters. Battery operation: 4 x 1.5AAA Min 1000mAh batteries (included). DB Series Wireless Photocell 001DBC01 001DBC03 001DBC04 001DB-CG Pair of surface-mounted cordless mono-directional infrared photocells. Max range 10m (1 receiver + 1 transmitter with batteries). Surface-mounted bi-directional infrared repeater module with batteries. (1 lateral receiver + 1 front transmitter with batteries). Max range 10m. Surface-mounted bi-directional infrared repeater module with batteries. (1 front receiver + 1 lateral transmitter with batteries). Max range 10m. Accessory for photocells DB series. PVC post. Height 500mm. DB Safety Edges - For BX and BK Series 001DBS01 001DBS02 001DBCT 001DB-CG Mobile connection system for DF safety sensitive edge for BX-243, BX- BK series operators. Pair of cordless bi -directional infrared photocells with single contact output. Max range 10m. Built-in receiver and external transmitter with batteries. Mobile connection system for DF safety sensitive edge for BX-243, BX-BK series operators. Pair of cordless bi -directional infrared photocells with double contact output. Max range 10m. Built-in receiver and external transmitter with batteries. Accessory for DBS02: Surface mounted battery charged transmitter module to combine with DBS02. Max range 10m. Accessory for photocells DB series (001DBC01, 001DBC03, 001DBC04): PVC post. H =500mm. 4

4 SAFETY ACCESSORIES SAFETY EDGES An exclusive Came patent for protection from mechanical risks. and sensitive edge protects against accidental contact with people or animals passing under the photocells. No digging, masonry or demolitions are necessary. Safety Edges 001DFWN DFWN DFWN DFWN2500 Rubber safety sensitive edge with mechanical contact. L = 1.5m. Rubber safety sensitive edge with mechanical contact. L = 1.7m. Rubber safety sensitive edge with mechanical contact. L = 2.0m. Rubber safety sensitive edge with mechanical contact. L = 2.5m. KEYSWITCH SELECTORS & KEYPADS The command for all operators Available in the key, magnetic key card and transponder versions. TOP RANGE - Transmitters 001SET-E 001S S9000 Surface-mounted key switch with aluminium alloy casing and DIN cylinder. Surface-mounted keypad. Wired. 1,679,616 combinations. Surface-mounted radio keypad with frequency Mhz, with 4 storable codes. Compatible with AF43S - AF43SM - RE432 - RBE4MT radio receivers. 1,562,500 combinations (390,625 possible combinations for each code). 001S0001 One channel card (1 code) for S S0002 Two channel card (2 codes) for S S0004N 4-channel card for S7000. Possibility of radio controlling the 1st channel (4-memorisable codes). 001AF43S Plug-in receiver (learning) for S

5 RIO WIRELESS SAFETY SYSTEM RIO SYSTEM, TOTAL WIRELESS SAFETY. RIO System is the innovative radio-based safety system that needs no wiring connections between the control module and the safety accessories. This feature makes for very rapid installation times. wireless transceiver-technology. This is ideal for bringing up to code any existing systems or for rapidly installing entirely new systems. The control module is to be connected to the operator's control panel, whereas the other modules interact via radio. APPLICATION EXAMPLE ON A SLIDING GATE A = RIO Cell transmitter - 001RIOCEL01 B = RIO Cell receiver - 001RIOCEL01 C = RIO Edge receiver - 001RIOEDG01 D = Safety sensitive edge of the DFW series E 001RIOLUX01 F = RIO Control control module - 001RIOCTL01 ACCESSORIES FOR THE INSTALLATION: FOR RIO CELL PHOTOCELLS 001DB-CG natural anodised aluminium post. H = 500 mm. FOR RIO LUX FLASHING LIGHT D E D C A F B A C B 6

6 RIO ACCESSORIES System Components & Main Characteristics 001RIOCTL01 Radio control module, with 30m range, which can manage up to ten RIO-series wireless accessories that are programmed in during installation. LED for monitoring the system and operation of the devices. malfunction of the wireless accessories. Automatic frequency change in case of any disturbances on the air waves. Special function for viewing the radio signal s quality and presence of any air-wave disturbances. 001RIOLUX01 Two high-luminosity LEDs for all-around signalling that the operator is moving. LED for monitoring the system and proper operation of the devices. 001RIOEDG01 its safety and reliability. Wireless module for controlling either one or two DFW-series (8K2) resistive sensitive safety-edges, which can transmit and receive from and to RIO CONTROL. Battery-powered. LED for monitoring the system and proper operation of the devices. 001RIOCEL01 Pair of wireless battery-powered photocells. They can transmit and receive to and from RIOCTL and RIOCONN. Infrared signal. Range: 10m. devices. 001RIOCONN01 Rio connectivity card for RIOCONN ready automation systems. 001DB-CG Light grey PVC post. For 001RIOCEL01 Photocells. 7

7 SAFETY ACCESSORIES FLASHING LIGHTS Formal, elegance and technological innovation much more than just a light warning. Flashing Lights 001KLED 001KLED24 001KIAROS 001DD-1KA 001DD-1KB 001DD-1TA433 Flashing light LED 230V AC. Flashing light LED 24V DC. Flashing light DADOO 230V AC - 120V AC - 24V AC-DC with amber light. Flashing light DADOO 230V AC - 120V AC - 24V AC-DC with blue light. OTHER ACCESORIES Further accessories to enchance your system Further accessories 001LOCK81 LOOP/12 LOOP/220 BAT 1.2 BAT 5.0 BAT7 PCB/RELAY 24V Electric lock with single cylinder. Loop detector 12/24V AC-DC. Loop detector 220V AC. Battery 1.2Ah 12V DC. Battery 5.0Ah 12V DC. Battery 7.0Ah 12V DC. Relay for Autogate contact. 8

8 3 DIFFERENT WAYS TO CONNECT... GSM Ethernet GSM STANDALONE MODULE Stand-Alone Entry Level GSM Gateway for CAME CONNECT systems WiFi...TO SUIT ALL APPLICATIONS 001RGSM001S The RGSM001S is the entry level gateway connection kit to connect the CAME automation system to the CAME CONNECT cloud platform through the GSM network. The interface with the automation may be: An RS485 serial type (if the CRP protocol is present in the automation control panel) or Through two inputs for clean contacts and two outputs relays. It is possible to connect to this module up to 3 additional automation systems if the CAME CRP protocol is present in the automation control panels through the RS485 connection. * Data GPRS SIM not included. GSM MODULE GSM Gateway including RADIO expansion for CAME CONNECT systems 001RGSM001 The RGSM001 has an integrated radio module to connect the CAME automation system to the CAME CONNECT cloud platform through the GSM network. The RGSM001 also allows the management of up to 5 slave radio modules. The interface with the automation may be: An RS485 serial type (if the CRP protocol is present in the automation control panel) or Through two inputs for clean contacts and two outputs relays. It is possible to connect to this module up to 3 additional automation systems if the CAME CRP protocol is present in the automation control panels through the RS485 connection. Using the RGSM001 module it is possible to manage up to 5 slave radio modules (RSLV001) to connect up to 5 * Data GPRS SIM is not included. ETHERNET MODULE ETHERNET CONNECTIVITY 001RETH001 The RETH001 has an integrated radio module to connect the gate automation to the CAME CONNECT cloud through an Ethernet network. This RETH001 kit includes the Ethernet connection module and one RSLV001 slave Radio module. The RETH001 kit allows the user to manage up to 5 slave radio modules in total (RSLV001) to connect up to 5 individual automation systems. * Power supply and Ethernet cable are included. SLAVE MODULE SLAVE Radio Module for use with CAME CONNECT 001RSLV001 Slave module for radio communication with GSM Gateway (RGSM001) and Ethernet Gateway Kit (RETH001). The interface with the automation may be: An RS485 serial type (if the CRP protocol is present in the automation control panel) or through two inputs for clean contacts and two outputs relays. INDUSTRIAL GATEWAY KIT GSM / ETHERNET / WIFI CONNECTIVITY 001UR042 CONNECT GW module for remotely managing CAME operators, via the CAME CONNECT dedicated system. For connecting one or more operators to CAME Cloud or to a dedicated local network and make it possible to remotely manage the operators functions, you need to install the CONNECT GW gateway. This serves to connect up the system to the web. RSE CONNECTION CARD FOR USE WITH GSM / ETHERNET / WIFI MODULES 002RSE The RSE card is used to connect the RGSM001S, RGSM001 and RETH001 gateway connection modules to the automation system control panel using the CRP protocol as they do not feature the Micromatch connection on board. The RSE card may also be needed when the automation system control panel does 8I/8O BOARD BOARD TO BE USED FOR AUXILIARY SERVICES 002IORS485 The IORS485 board features 8 Inputs & 8 Outputs. It can be used to drive equipment and products from other manufacturers or to monitor other devices and even create scenarios based on certain actions. As an example it is possible to connect other gate automation motors, lights, activate machines or home appliances through CAME CONNECT. 9

9 ACTIVATION ACCESSORIES TOP RANGE - Transmitters TOP RANGE Ideal solution for residential settings Transponder feature 001TOP-432EE 001TOP-434EE 001TOP-432EV 001TOP-434EV 2 Button remote MHz. 4 Button remote MHz. 2 Button transmitter with self-learning function. 4 Button transmitter with self-learning function. TOP RANGE - Receivers 001AF43S 001AF43SM 001RE RBE4MT 001TOP-A433N Plug-in receiver (learning). Plug-in receiver (learning). Memory up to 128 user codes. Surface-mounted bi-channel receiver, 12-24V AC-DC, IP54. Surface-mounted 4-channel multi-user 12-24V AC-DC, IP54 to store up to 999 codes (users). Antenna. 001TOP-RG58 Antenna cable (suitable for all types of antennas). Price per m. TWIN RANGE Ideal solution for multi-user setting (Modern and elegant design) Key code transmitter, password code that protects the transmitter from unauthorised duplications. Transponder feature TWIN RANGE - Transmitters 001TWIN2 001TWIN4 2 Button transmitter with KEY CODE function. 4,294,967,892 combinations. 4 Button transmitter with KEY CODE function. 4,294,967,892 combinations. TWIN RANGE - Receivers 001AF43TW 001AF43S 001AF43SM 001RE432TW Plug-in receiver with KEY CODE function. Plug-in receiver (learning). Plug-in receiver (learning). Memory up to 128 user codes. Surface-mounted bi-channel receiver with KEY CODE function 12-24V AC-DC, IP RE432 Surface-mounted bi-channel receiver, 12-24V AC-DC, IP TOP-A433N Antenna TOP-RG58 Antenna cable (suitable for all types of antennas). Price per m.

10 ACTIVATION ACCESSORIES SHERLOTRONICS RANGE SHERLOTRONICS - Transmitters TX1 TX2 TX4 1 Button remote code-hopping: 403MHz. 2 Button remote code-hopping: 403MHz. 4 Button remote code-hopping: 403MHz. SHERLOTRONICS RANGE - Receivers RX1-150 RX2-150 RX3-150 RX1-500 RX Channel receiver 150m range: 403MHz. 2 Channel receiver 150m range: 403MHz. 4 Channel receiver 150m range: 403MHz. 1 Channel receiver 500m range: 403MHz. 4 Channel receiver 500m range: 403MHz. SENTRY RANGE SENTRY - Transmitters TX1B 1 Button binary transmitter 403. TX3-NV3 TX4-NV4 3 Button C/HOP transmitter 433 Nova comp. 4 Button C/HOP transmitter 433 Nova comp. SENTRY RANGE - Receivers RX1 1 Channel binary RX 403. RX3-C3 3 Channel C/HOPING RX 433. BLUETOOTH SELECTOR & SMARTPHONE APP The Came Blue APP allows each connected Smartphone, when connected to the Bluetooth selector, to send an opening or closing command to the automation system. In order to connect the Selector to the CAME automation control panel it AVAILABLE FROM JANUARY