Konica Minolta. Specification & Installation Guide. bizhub PRESS C1100/C1085. Main Body Specifications. Duty Cycle

Transcription

1 Konica Minolta bizhub PRESS C1100/C /13/2014 bizhub PRESS C1100/C1085 Main Body Specifications Type Printing process Photoconductor Console Quad PC drum tandem laser electrostatic process OPC Developing system Dry, dual-component reverse magnetic brush developing Transfer method Belt Fusing method Belt/roller Printing resolution True 1200 x 1200 dpi and 600 x 600 dpi resolution with 8 bit per color processing. Equivalent to offset printing of 3600 x 1200 dpi. Gradation/Color 8 bits per channel, (C,M,Y,K) or 256 shades per color. Printing Speed bizhub PRESS C1100 (Color/Black): 100 sheets/min. (A4P, 8.5" x 11"P), 78 sheets/min. (8.5" x 11"L) Continuous Printing Paper Feeding Method/Capacity Paper Type/Weight (PF-707/708) Memory Paper edge deletion area bizhub PRESS C1085 (Color/Black): 85 sheets/min. (A4P, 8.5" x 11"P), 68 sheets/min. (8.5" x 11"L) 1 to 9,999 prints Main Body: no paper trays Paper Feeder Unit PF-707/Paper Feeder Unit PF-708: 3 paper trays, air suction system, 3 units connectable at maximum. Upper/Middle Tray: 1,390 sheets (80 gsm/21 lb. Bond) Fine/Plain/Color Specific: 17 lb. Bond to 140 lb. Cover, (64 gsm to 350 gsm) Coated Paper: Laser and Offset Gloss and Laser and Offset Matte, 22 lb. Bond to 110 Cover*, (81 gsm to 300 gsm)* Optional Trays 6 and 9 Simplex only Labels and OHP transparencies are unavailable. Reverse delivery: 17 lb. to 80 lb. Bond (64 gsm to 300 gsm) Duplex delivery: 17 lb. to 80 lb. Bond (64 gsm to 300 gsm) Image Memory: 4 GB System Memory: 4 GB (+ UK 105 Upgrade Kit: 8 GB, + IC 602: 16 GB) Leading and trailing edges: 4 mm or less Right and left edges: 3 mm or less Trailing edge of 53 lb. Bond (200 gsm) or more: 6 mm or less Warm-up time 8.0 minutes or less (20 C, 50% RH, 230 V) Power requirements Rated voltage: AC 208 to 240 V Rated current: 24 A Rated frequency: 60 Hz Power consumption 5,760 W Option configuration: same as above Weight Main body: 948 lb. Dimensions Main body: 35.4"(W)* 1 x 37.4"(D)* 2 x 51.9"(H)* 3 (900 (W) x 950 (D) x 1,319 (H) mm) (500 (W) x 771 (D) x 1,020 (H) mm) Main body + Paper Feeder Unit PF Relay Unit RU Large Capacity Stacker LS Perfect Binder PB-503: "(W) x 37.4"(D)* 2 x 58.2"(H)* 3 (4,477 (W) x 950 (D) x 1,478 (H) mm) *1: Including control panel, exit tray, work table *2: Including rear duct *3: Including control panel Operating 10 C (50 F) to 30 C (86 F) temperature Humidity 10 to 80% RH Duty Cycle bizhub C1100: Up to 1 million monthly bizhub C1085: Up to 750,000 monthly Maximum monthly copy/print volume supported under standard vendor supplied service. Defines the upper end of the expected customer volume for the device. Customers should consider multiple machines if average monthly volume approaches duty cycle on continual basis. 1

2 Environmental Requirements Temperature 50 F to 86 F (operating) Humidity 10% to 80% (operating) Engine Noise Printing: Copying: Standby: Ozone Emission Monochrome: Color: Fusing Range 356 F (180 C) 55 db 57 db 39 db 1.5 mg/h or less 3.0 mg/h or less Electrical Requirements Line options Dedicated NEMA Diagram for L6-30R Voltage V/60 Hz Amperage 24 A or less NEMA Part No. L6-30R Cord Length 6 ft. 2

3 Space Requirements Allow sufficient space for facilitating print operation, changing parts, and periodic inspection. Leave an adequate space behind the machine to let hot air out from the rear fan. Make sure there is enough space near the machine for Image Controller IC-308/IC-310 installation at your site. You need a minimum of 8 inches (20 cm) at the back and sides of the Image Controller IC-308/IC-310, as shown in the following illustration. The whole machine may weigh approximately 1,990 (4,491 lb) at maximum, depending on the combination of options. Be sure to choose a level and solid floor for the installation place " (410) 35.43"(900) 39.12"(996) 94.72"(2406) (100) RU bizhub PRESS C1100/C PF " (1649.5) 46.85" (1190) 64.94" (1649.5) 47.54" (1207.6) 16.14" (410) 35.43"(900) 39.12"(996) (100) 94.72"(2406) RU bizhub PRESS C1100/C PF " (1649.5) 64.94" (1649.5) 46.85" (1190) 37.4"(950) 37.4"(950) 30.16"(766) 37.4"(950) 7.87"(200) 7.87"(200) 7.87"(200) 82.68"(2100) 83.31"(2116) RU bizhub PRESS C1100/C PF-707 SD-506 +RU bizhub PRESS C1100/C PF-708 3

4 Space Requirements continued 64.94" (1649.5) 46.85" (1190) 16.14" (410) 35.43"(900) 39.12"(996) 39.12"(996) 13(3402) (100) RU bizhub PRESS C1100/C PF PF " (1649.5) 47.54" (1207.6) 16.14" (410) 35.43"(900) 39.12"(996) 39.12"(996) 13(3402) (100) RU bizhub PRESS C1100/C PF PF " (1649.5) 46.85" (1190) 16.14" (410) 35.43"(900) 39.12"(996) 39.12"(996) 39.12"(996) (100) "(4398) RU bizhub PRESS C1100/C PF PF PF " (1649.5) 47.54" (1207.6) 16.14" (410) 35.43"(900) 39.12"(996) 39.12"(996) 39.12"(996) (100) "(4398) RU bizhub PRESS C1100/C PF PF PF-707 4

5 Space Requirements 64.94" (1649.5) 46.85" (1190) 16.14" 12.01" 16.14" 35.43"(900) 39.12"(996) (410) (305) (410) (100) "(3121) RU GP RU bizhub PRESS C1100/C PF " (1649.5) 47.54" (1207.6) 16.14" 12.01" 16.14" 35.43"(900) 39.12"(996) (410) (305) (410) (100) "(3121) RU GP RU bizhub PRESS C1100/C PF " (1649.5) 46.85" (1190) 16.14" 12.01" 16.14" 35.43"(900) 39.12"(996) 39.12"(996) (410) (305) (410) (100) "(4117) RU GP RU bizhub PRESS C1100/C PF PF " (1649.5) 47.54" (1207.6) 16.14" 12.01" 16.14" 35.43"(900) 39.12"(996) 39.12"(996) (410) (305) (410) (100) "(4117) RU GP RU bizhub PRESS C1100/C PF PF-707 5

6 Space Requirements continued 64.94" (1649.5) 46.85" (1190) 16.14" 12.01" 16.14" 35.43"(900) 39.12"(996) 39.12"(996) 39.12"(996) (410) (305) (410) (100) "(5113) RU GP RU bizhub PRESS C1100/C PF PF PF " (1649.5) 47.54" (1207.6) 16.14" 12.01" 16.14" 35.43"(900) 39.12"(996) 39.12"(996) 39.12"(996) (410) (305) (410) (100) "(5113) RU GP RU bizhub PRESS C1100/C PF PF PF " (1649.5) 46.85" (1190) 25.79" 16.14" 35.43"(900) 39.12"(996) (655) (410) (100) "(3061) GP RU bizhub PRESS C1100/C PF " (1649.5) 47.54" (1207.6) 25.79" 16.14" 35.43"(900) 39.12"(996) (655) (410) (100) "(3061) GP RU bizhub PRESS C1100/C PF-707 6

7 Space Requirements 64.94" (1649.5) 46.85" (1190) 25.79" 16.14" 35.43"(900) 39.12"(996) 39.12"(996) (655) (410) (100) "(4057) GP RU bizhub PRESS C1100/C PF PF " (1649.5) 47.54" (1207.6) 25.79" 16.14" 35.43"(900) 39.12"(996) 39.12"(996) (655) (410) (100) "(4057) GP RU bizhub PRESS C1100/C PF PF " (1649.5) 46.85" (1190) 25.79" 16.14" 35.43"(900) 39.12"(996) 39.12"(996) 39.12"(996) (655) (410) (100) "(5053) GP RU bizhub PRESS C1100/C PF PF PF " (1649.5) 47.54" (1207.6) 25.79" 16.14" 35.43"(900) 39.12"(996) 39.12"(996) 39.12"(996) (655) (410) (100) "(5053) GP RU bizhub PRESS C1100/C PF PF PF-707 7

8 Space Requirements continued 48.46" (1231) (100) 4.61" (117) 10.51" (267) 15.75" (400) "(3290): FD (RU bizhub C1100/C PF-707/PF-708) "(4286): FD (RU bizhub C1100/C PF-707/PF PF-707) "(5282): FD (RU bizhub C1100/C PF-707/PF PF PF-707) (100) 30.91" (785) "(3291): LS (RU bizhub C1100/C PF-707/PF-708) "(4287): LS (RU bizhub C1100/C PF-707/PF PF-707) "(5283): LS (RU bizhub C1100/C PF-707/PF PF PF-707) (100) 30.91" (785) 30.91" (785) "(4076): LS-506 x2 + (RU bizhub C1100/C PF-707/PF-708) "(5072): LS-506 x2 + (RU bizhub C1100/C PF-707/PF PF-707) "(6068): LS-506 x2 + (RU bizhub C1100/C PF-707/PF PF PF-707) 8

9 Space Requirements (100) 5.18" (131) 13.11" (333) 21.42" (544) "(3514): FS (RU bizhub C1100/C PF-707/PF-708) "(4510): FS (RU bizhub C1100/C PF-707/PF PF-707) "(5506): FS (RU bizhub C1100/C PF-707/PF PF PF-707) "(4229): FS (RU GP RU bizhub C1100/C PF-707/PF-708) "(5225): FS (RU GP RU bizhub C1100/C PF-707/PF PF-707) "(6221): FS (RU GP RU bizhub C1100/C PF-707/PF PF PF-707) "(4169): FS (GP RU bizhub C1100/C PF-707/PF-708) "(5165): FS (GP RU bizhub C1100/C PF-707/PF PF-707) "(6161): FS (GP RU bizhub C1100/C PF-707/PF PF PF-707) (100) 46.06" (1170) "(3676): SD (RU bizhub C1100/C PF-707/PF-708) 18(4672): SD (RU bizhub C1100/C PF-707/PF PF-707) "(5668): SD (RU bizhub C1100/C PF-707/PF PF PF-707) 48.54" (1233) (100) 53.54" (1360) "(3866): PB (RU bizhub C1100/C PF-707/PF-708) "(4862): PB (RU bizhub C1100/C PF-707/PF PF-707) "(5858): PB (RU bizhub C1100/C PF-707/PF PF PF-707) "(4581): PB (RU GP RU bizhub C1100/C PF-707/PF-708) "(5577): PB (RU GP RU bizhub C1100/C PF-707/PF PF-707) "(6573): PB (RU GP RU bizhub C1100/C PF-707/PF PF PF-707) "(4521): PB (GP RU bizhub C1100/C PF-707/PF-708) "(5517): PB (GP RU bizhub C1100/C PF-707/PF PF-707) "(6513): PB (GP RU bizhub C1100/C PF-707/PF PF PF-707) 9

10 Space Requirements continued (100) 30.91" (785) 15.75" (400) "(3691): LS FD (RU bizhub C1100/C PF-707/PF-708) "(4687): LS FD (RU bizhub C1100/C PF-707/PF PF-707) "(5683): LS FD (RU bizhub C1100/C PF-707/PF PF PF-707) (100) 46.06" (1170) 15.75" (400) "(4076): SD FD (RU bizhub C1100/C PF-707/PF-708) "(5072): SD FD (RU bizhub C1100/C PF-707/PF PF-707) "(6068): SD FD (RU bizhub C1100/C PF-707/PF PF PF-707) (100) 5.18" (131) 13.11" (333) 21.42" (544) 15.75" (400) "(3914): FS FD (RU bizhub C1100/C PF-707/PF-708) "(4910): FS FD (RU bizhub C1100/C PF-707/PF PF-707) "(5906): FS FD (RU bizhub C1100/C PF-707/PF PF PF-707) "(4629): FS FD (RU GP RU bizhub C1100/C PF-707/PF-708) "(5625): FS FD (RU GP RU bizhub C1100/C PF-707/PF PF-707) "(6621): FS FD (RU GP RU bizhub C1100/C PF-707/PF PF PF-707) "(4569): FS FD (GP RU bizhub C1100/C PF-707/PF-708) "(5565): FS FD (GP RU bizhub C1100/C PF-707/PF PF-707) "(6561): FS FD (GP RU bizhub C1100/C PF-707/PF PF PF-707) 10

11 Space Requirements (100) 46.06" (1170) 30.91" (785) 15.75" (400) "(4861): SD LS FD (RU bizhub C1100/C PF-707/PF-708) "(5857): SD LS FD (RU bizhub C1100/C PF-707/PF PF-707) "(6853): SD LS FD (RU bizhub C1100/C PF-707/PF PF PF-707) (100) 5.18" (131) 13.11" (333) 21.42" (544) 30.91" (785) 15.75" (400) "(4699): FS LS FD (RU bizhub C1100/C PF-707/PF-708) "(5695): FS LS FD (RU bizhub C1100/C PF-707/PF PF-707) "(6691): FS LS FD (RU bizhub C1100/C PF-707/PF PF PF-707) 48.15" (1223) (100) 54.54" (1360) 30.91" (785) 15.75" (400) "(5051): PB LS FD (RU bizhub C1100/C PF-707/PF-708) "(6047): PB LS FD (RU bizhub C1100/C PF-707/PF PF-707) "(7043): PB LS FD (RU bizhub C1100/C PF-707/PF PF PF-707) 11

12 Space Requirements continued (100) 5.18" (131) 13.11" (333) 21.42" (544) 46.06" (1170) 15.75" (400) "(5084): FS SD FD (RU bizhub C1100/C PF-707/PF-708) "(6080): FS SD FD (RU bizhub C1100/C PF-707/PF PF-707) "(7076): FS SD FD (RU bizhub C1100/C PF-707/PF PF PF-707) "(5799): FS SD FD (RU GP RU bizhub C1100/C PF-707/PF-708) "(6795): FS SD FD (RU GP RU bizhub C1100/C PF-707/PF PF-707) "(7791): FS SD FD (RU GP RU bizhub C1100/C PF-707/PF PF PF-707) "(5739): FS SD FD (GP RU bizhub C1100/C PF-707/PF-708) "(6735): FS SD FD (GP RU bizhub C1100/C PF-707/PF PF-707) "(7731): FS SD FD (GP RU bizhub C1100/C PF-707/PF PF PF-707) 48.15" (1223) (100) 54.54" (1360) 46.06" (1170) 15.75" (400) "(5436): PB SD FD (RU bizhub C1100/C PF-707/PF-708) "(6432): PB SD FD (RU bizhub C1100/C PF-707/PF PF-707) "(7428): PB SD FD (RU bizhub C1100/C PF-707/PF PF PF-707) (100) 5.18" (131) 13.11" (333) 21.42" (544) 54.54" (1360) 46.06" (1170) 15.75" (400) "(6444): FS PB SD FD (RU bizhub C1100/C PF-707/PF-708) "(7440): FS PB SD FD (RU bizhub C1100/C PF-707/PF PF-707) "(8436): FS PB SD FD (RU bizhub C1100/C PF-707/PF PF PF-707) 12

13 Space Requirements (100) 30.91" (785) 30.91" (785) 15.75" (400) "(4476): LS-506 x2 + FD (RU bizhub C1100/C PF-707/PF-708) "(5472): LS-506 x2 + FD (RU bizhub C1100/C PF-707/PF PF-707) "(6468): LS-506 x2 + FD (RU bizhub C1100/C PF-707/PF PF PF-707) (100) 46.06" (1170) 30.91" (785) "(4461): SD LS (RU bizhub C1100/C PF-707/PF-708) "(5457): SD LS (RU bizhub C1100/C PF-707/PF PF-707) "(6453): SD LS (RU bizhub C1100/C PF-707/PF PF PF-707) "(5176): SD LS (RU GP RU bizhub C1100/C PF-707/PF-708) "(6172): SD LS (RU GP RU bizhub C1100/C PF-707/PF PF-707) "(7168): SD LS (RU GP RU bizhub C1100/C PF-707/PF PF PF-707) "(5116): SD LS (GP RU bizhub C1100/C PF-707/PF-708) "(6112): SD LS (GP RU bizhub C1100/C PF-707/PF PF-707) "(7108): SD LS (GP RU bizhub C1100/C PF-707/PF PF PF-707) (100) 5.18" (131) 13.11" (333) 21.42" (544) 30.91" (785) "(4299): FS LS (RU bizhub C1100/C PF-707/PF-708) "(5295): FS LS (RU bizhub C1100/C PF-707/PF PF-707) "(6291): FS LS (RU bizhub C1100/C PF-707/PF PF PF-707) "(5014): FS LS (RU GP RU bizhub C1100/C PF-707/PF-708) "(6010): FS LS (RU GP RU bizhub C1100/C PF-707/PF PF-707) "(7006): FS LS (RU GP RU bizhub C1100/C PF-707/PF PF PF-707) "(4954): FS LS (GP RU bizhub C1100/C PF-707/PF-708) "(5950): FS LS (GP RU bizhub C1100/C PF-707/PF PF-707) "(6946): FS LS (GP RU bizhub C1100/C PF-707/PF PF PF-707) 13

14 Space Requirements continued 48.15" (1223) (100) 54.54" (1360) 30.91" (785) "(4651): PB LS (RU bizhub C1100/C PF-707/PF-708) "(5647): PB LS (RU bizhub C1100/C PF-707/PF PF-707) "(6643): PB LS (RU bizhub C1100/C PF-707/PF PF PF-707) "(5366): PB LS (RU GP RU bizhub C1100/C PF-707/PF-708) "(6362): PB LS (RU GP RU bizhub C1100/C PF-707/PF PF-707) "(7358): PB LS (RU GP RU bizhub C1100/C PF-707/PF PF PF-707) "(5306): PB LS (GP RU bizhub C1100/C PF-707/PF-708) "(6302): PB LS (GP RU bizhub C1100/C PF-707/PF PF-707) "(7298): PB LS (GP RU bizhub C1100/C PF-707/PF PF PF-707) (100) 5.18" (131) 13.11" (333) 21.42" (544) 46.06" (1170) 30.91" (785) "(5469): FS SD LS (RU bizhub C1100/C PF-707/PF-708) "(6465): FS SD LS (RU bizhub C1100/C PF-707/PF PF-707) "(7461): FS SD LS (RU bizhub C1100/C PF-707/PF PF PF-707) 48.15" (1223) (100) 54.54" (1360) 46.06" (1170) 30.91" (785) "(5821): PB SD LS (RU bizhub C1100/C PF-707/PF-708) "(6817): PB SD LS (RU bizhub C1100/C PF-707/PF PF-707) "(7813): PB SD LS (RU bizhub C1100/C PF-707/PF PF PF-707) 14

15 Space Requirements (100) 5.18" (131) 13.11" (333) 21.42" (544) 54.54" (1360) 30.91" (785) "(5659): FS PB LS (RU bizhub C1100/C PF-707/PF-708) "(6655): FS PB LS (RU bizhub C1100/C PF-707/PF PF-707) "(7651): FS PB LS (RU bizhub C1100/C PF-707/PF PF PF-707) (100) 46.06" (1170) 30.91" (785) 30.91" (785) "(5246): SD LS-506 x2 + (RU bizhub C1100/C PF-707/PF-708) "(6242): SD LS-506 x2 + (RU bizhub C1100/C PF-707/PF PF-707) "(7238): SD LS-506 x2 + (RU bizhub C1100/C PF-707/PF PF PF-707) (100) 5.18" (131) 13.11" (333) 21.42" (544) 30.91" (785) 30.91" (785) "(5084): FS LS-506 x2 + (RU bizhub C1100/C PF-707/PF-708) "(6080): FS LS-506 x2 + (RU bizhub C1100/C PF-707/PF PF-707) "(7076): FS LS-506 x2 + (RU bizhub C1100/C PF-707/PF PF PF-707) 15

16 Space Requirements continued 48.15" (1223) (100) 54.54" (1360) 30.91" (785) 30.91" (785) "(5436): PB LS-506 x2 + (RU bizhub C1100/C PF-707/PF-708) "(6432): PB LS-506 x2 + (RU bizhub C1100/C PF-707/PF PF-707) "(7428): PB LS-506 x2 + (RU bizhub C1100/C PF-707/PF PF PF-707) (100) 5.18" (131) 13.11" (333) 21.42" (544) 46.06" (1170) "(4684): FS SD (RU bizhub C1100/C PF-707/PF-708) "(5680): FS SD (RU bizhub C1100/C PF-707/PF PF-707) "(6676): FS SD (RU bizhub C1100/C PF-707/PF PF PF-707) "(5399): FS SD (RU GP RU bizhub C1100/C PF-707/PF-708) "(6395): FS SD (RU GP RU bizhub C1100/C PF-707/PF PF-707) "(7391): FS SD (RU GP RU bizhub C1100/C PF-707/PF PF PF-707) "(5339): FS SD (GP RU bizhub C1100/C PF-707/PF-708) "(6335): FS SD (GP RU bizhub C1100/C PF-707/PF PF-707) "(7331): FS SD (GP RU bizhub C1100/C PF-707/PF PF PF-707) 48.15" (1223) (100) 54.54" (1360) 46.06" (1170) "(5036): PB SD (RU bizhub C1100/C PF-707/PF-708) "(6032): PB SD (RU bizhub C1100/C PF-707/PF PF-707) "(7028): PB SD (RU bizhub C1100/C PF-707/PF PF PF-707) 16

17 Space Requirements (100) 5.18" (131) 13.11" (333) 21.42" (544) 54.54" (1360) 46.06" (1170) "(6044): FS PB SD (RU bizhub C1100/C PF-707/PF-708) "(7040): FS PB SD (RU bizhub C1100/C PF-707/PF PF-707) "(8036): FS PB SD (RU bizhub C1100/C PF-707/PF PF PF-707) (100) 5.18" (131) 13.11" (333) 21.42" (544) 54.54" (1360) "(4874): FS PB (RU bizhub C1100/C PF-707/PF-708) "(5870): FS PB (RU bizhub C1100/C PF-707/PF PF-707) "(6866): FS PB (RU bizhub C1100/C PF-707/PF PF PF-707) "(5589): FS PB (RU GP RU bizhub C1100/C PF-707/PF-708) "(6585): FS PB (RU GP RU bizhub C1100/C PF-707/PF PF-707) "(7581): FS PB (RU GP RU bizhub C1100/C PF-707/PF PF PF-707) "(5529): FS PB (GP RU bizhub C1100/C PF-707/PF-708) "(6525): FS PB (GP RU bizhub C1100/C PF-707/PF PF-707) "(7521): FS PB (GP RU bizhub C1100/C PF-707/PF PF PF-707) (100) 5.18" (131) 13.11" (333) 21.42" (544) 25.79" (655) 30.91" (785) 15.75" (400) "(5354): FS GP SD (RU bizhub C1100/C PF-707/PF-708) "(6350): FS GP SD (RU bizhub C1100/C PF-707/PF PF-707) "(7346): FS GP SD (RU bizhub C1100/C PF-707/PF PF PF-707) 17

18 Space Requirements continued (100) 5.18" (131) 13.11" (333) 21.42" (544) 25.79" (655) 46.06" (1170) 15.75" (400) "(5739): FS GP SD (RU bizhub C1100/C PF-707/PF-708) "(6735): FS GP SD (RU bizhub C1100/C PF-707/PF PF-707) "(7731): FS GP SD (RU bizhub C1100/C PF-707/PF PF PF-707) 18

19 Component Considerations RU-511 Relay Unit Type Relay unit with paper-cooling and curl adjustment functions Mechanical curl adjustment Adjust paper curl by letting it through a zigzag path, then deliver paper accelerating it according to the basic line speed determined for finishing operation. Humidifying curl adjustment Humidify paper using Humidifier HM-101 (option), then deliver paper accelerating it according to the basic line speed determined for finishing operation. Straight delivery Reverse delivery Color density adjustment Conveyance speed Paper size Paper type Paper weight Dimensions Weight Deliver paper accelerating it according to the basic line speed determined for finishing operation, without making mechanical or humidifying curl adjustment. Reverse and deliver paper accelerating it according to the basic line speed determined for finishing operation. Measure the color density of the density patch printed on paper, in order to use it as the data for image stabilization adjustment. 80 sheets/min. (8.5" x 11"P, A4P) 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"L/P, SRA3L, A3L, B4L, SRA4L/P, A4L/P, B5L/P, A5L/P, B6L, A6L, Foolscap, a9" x 11"P, Custom, Tab Paper Max. 13" x 19.2" (331 mm x 488 mm) to min. 3.74" x 5.47" (95 mm x 139 mm) Recommended for main body 17 to 93 lb. Bond (64 gsm to 350 gsm) 17 to 80 lb. Bond (64 gsm to 300 gsm) in reverse delivery 16.1"(W) x 28.9"(D) x 40.2"(H); (410 (W) x 735 (D) x 1,020 (H) mm) Approx lbs. (80 kg) Power requirements AC 120V 3.6A; NEMA: 5-20R Power source See Power Source section for additional detailed image. 19

20 Component Considerations continued HM-101 Humidifier PK- 512 Type Function PI-502 Processing speed Humidifier tank capacity Paper size Paper type Paper weight Dimensions Paper humidifying kit Humidify paper on both front and back sides uniformly to make a curl adjustment. 80 sheets/min. 20 liters (equivalent of approx. 100,000 prints) Conforms to that of Relay Unit RU-508 Recommended for main body (except Coated) 17 to 93 lb Bond (64 gsm to 350 gsm) Humidifying section: 13.3"(W) x 25.4"(D) x 9.7"(H); (339 (W) x 646 (D) x 246(H) mm) Weight 506 RU-506 FD-503 FS-612 Power source GP-501 Approx. 22 lbs. (10 kg) 24 V DC inlet (internal) PF-707 Paper Feeder Unit HT-506 HT-506 Paper Size SRA3, A3, B4, A4, B5, A5, 13" x 19", 12" x 18", 11" x 17", 9" x 11", (S: Short Edge Feed L ) 8.5" x 14", 8.5" x 11" Max mm x mm, Min. 100 mm x 140 mm*1 Tab paper (A4, 8.5" x 11") PF-704 Paper Type Paper Weight Max. Tray Capacity PF-705 Power Source Dimensions (WxDxH) Weight Plain, Fine, Color, Coated, Envelope*2 62 gsm to 350 gsm 4,630 sheets (80 gsm) Tray (upper/middle): 1,390 sheets Tray (lower tray): 1,850 sheets Requires own electrical outlet (5-20R) " x 30.39" x 40.87" (996 mm x 772 mm x 1038 mm) 203 kg/447.4 lb. *1 For the paper whose width is less than 140 mm, use the small size guide. *2 Only upper tray supports envelopes. 20

21 Component Considerations PF-708 Paper Feeder Unit Function Feed paper into main body Configuration 3 paper trays PI-502 Paper size Standard: 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"L/P, SRA3L, A3L, B4L* 1, A4P, SRA4P, B5L/P, A5P, B6L, A6L The following standard sizes can be switched for detection. A5L and A4 instead of 5.5" x 8.5"L and 8.5" x 11"L, SRA4L, 8" x 13"L, 8.12" x 13.2"L, 8.25" x 13"L, or 8.5" x 13"L instead of 8.5" x 14"L, 9" x 11"P instead of 8.5" x 11"P Custom: Max. 13" x 19.2" (330 mm x 487 mm) to min., x 5.51" (100 mm x 140 mm) Paper type Plain, Fine, Coat, Color Paper weight 17 to 93 lb Bond (64 gsm to 350 gsm) Paper tray capacity 1,390 sheets (21 lb Bond) x 2 + 1,850 sheets (21 lb Bond) x 1 Dimensions 39.2"(W) x 30.4"(D) x 47.6"(H); (996 (W) x 772 (D) x 1,208 (H) mm) - 2 Weight Power source/ requirements Approx lbs. (242 kg) DC: 5 V, 12 V, 12 V (24 V supplied from internal DC) AC1 (supplied from main body, for heater): 180 to 264 V (50/60 Hz) AC2 (supplied from outlet, for HT and DC): 120 V ± 10% (50/60 Hz) NEMA: 5-20R; See Power Source section for additional detailed image. FS-612 GP-501 Power consumption DC: 270 W or less; AC: 580 W or less HT-506 Dehumidifier Heater HT-506 Function Dimensions Weight Dehumidifier of fan heater type Dehumidifier fan unit + supply/exhaust air duct: 11.5"(W) x 13.2"(D) x 6.9"(H), (293 (W) x 336 (D) x 176 (H) mm) Power supply unit: 8.3"(W) x 4.2"(D) x 3.0"(H), (212 (W) x 106 (D) x 77 (H) mm) Approx lbs. (6 kg) Power source/requirements DC: 24 V, 5V; AC: 180 to 264 V (50/60Hz); NEMA: 5-20R; See Power Source section for additional detailed image. Power consumption DC: 6 W or less; AC: 384 W or less (per unit) F

22 Component Considerations continued FS-532 Finisher Paper Weight Paper Size Paper Capacity Stapling Mode Types Power Source Max. Power Consumption Dimensions (WxDxH) Weight Staple Mode: 62 gsm to 300 gsm Straight/Shift Mode: 62 gsm to 300 gsm Staple Mode: Max. 330 mm x 488 mm, Min. 203 mm x 148 mm Straight/Shift Mode: Max. 330 mm x 487 mm, Min. 100 mm x 148 mm (Using small size guides) (80 gsm) Max. 4,500 sheets (Main + Sub tray) Corner stapling: Horizontal, Vertical 2-point stapling: Center Supplied from the machine 144W or less 21.5" 28.5" 42.25" (544 mm 723 mm 1,070 mm) lb./74 kg PK 522 Punch Kit Applicable Hole Pitch Paper Weight Finisher FS-532 Metric Area: 80 mm (2 holes/4 holes), 21 mm, 70 mm, 21 mm (Swedish 4 holes) Inch Area: 70 mm (2 holes), 108 mm (3 holes) 60 gsm to 300 gsm Paper Size 2-holes: A3, B4, A4, B5, 11" x 17", 9" x 11", 8.5" x 14", 8.5" x 11" (S: Short Edge Feed L ) 3-/4-holes: A3, B4, A4, B5, 11" x 17", 9" x 11", 8.5" x 11" Power Source Dimensions (WxDxH) Weight Supplied from the main unit 6.25" 23.25" 7.25" (156 mm 592 mm 180 mm) 9.92 lb./4.5 kg 22

23 Component Considerations SD 510 Saddle Stitcher Paper Size (S: Short Edge Feed L ) Fold Mode Tray Capacity Sheets Saddle Stitch Sheets Folded Power Source Dimensions (WxDxH) Weight Saddle Stitch Center-Fold Fold & Staple: SRA3, A3, B4, A4, 13" x 19", 12" x 18", 11" x 17", 8.5" x 14", 8.5" x 11"S Max. 330 mm x 487 mm, Min. 120 mm x 240 mm Three Fold-in: A4S, 8.5" x 11" Saddle Stitch (330 mm or more in length): 2 to 5 sheets: 35 sets, 6 to 10 sheets: 23 sets, 11 to 25 sheets: 15 sets Center-Fold: 1 to 5 sheets: 35 sets Three-Fold (less than 330 mm in length): 1-sheet fold: 50 sets, 2-sheet fold: 40 sets, 3-sheet fold: 30 sets Max. 20 sheets Center-Fold Max. 5 sheets Three-Fold-in Max. 3 sheets Supplied from the main unit 11.07" x 23.48" x 20.86" (281 mm x 596 mm x 530 mm) Approximately lb./26.4 kg *Usable paper types will vary according to function and paper exit destination. PI-502 Post Inserter (Optional Mount Kit MK 732 with FS 532 is required.) Paper Type Plain, Color, Special, Coated (50 gsm to 300 gsm) Paper Size AU-202H Upper Tray: A4, AU-204H B5, A5, 9" x 11", 8.5" x 11", 8.5" x 11"S Lower Tray: SRA3, A3, B4, A4, B5, A5, 12" x 18", 11" x 17", AU-211P 8.5" x 14", 8.5" x 11", 8.5" x 11"S Paper Capacity (80 gsm) Power Source Dimensions (WxDxH) Weight Max. 200 sheets Supplied from Finisher FS " 24.5" 8.75" (511 mm x 620 mm x 220 mm) Approx lb./10.5 kg 23

24 Component Considerations continued FD-503 Folding Unit Function Punch, multi-folding, post inserting of single sheet Number of punch holes 2 or 3 Hole diameter Hole pitch Hole vertical position 2 holes: 0.256" ± 0.020" (6.5mm± 0.5 mm) 3 holes: 0.315" ± 0.020" (8.0mm± 0.5 mm) 2 holes: 2.756" ± 0.020" (70mm± 0.5mm) 3 holes: 4.252" ± 0.020" (108mm± 0.5 mm) 2 holes: 0.413" ± 0.157" (10.5 mm ± 4 mm) 3 holes: 0.374" ± 0.157" (9.5 mm ± 4 mm) Paper Weight in Punch Mode 17 to 57 lb Bond (64 gsm to 216 gsm) Available Sizes Punch Mode Fold type 2 holes: 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, in 5.5" x 8.5"P, SRA3L, A3L, B4L, SRA4L, A4L/P, B5L/P, A5L/P, Foolscap, 9" x 11"P, Tab paper 3 holes: 12" x 18"L, 11" x 17"L, 8.5" x 11"P, SRA3L, A3L, B4L, SRA4L, A4P, B5P, 9" x 11"P, Tab paper Z-Fold, Tri-Fold-in, Tri-Fold-out, Half-Fold, Double Parallel, Gate Paper weight in Fold mode Z-Fold, Tri-Fold-in, Tri-Fold-out, Half-Fold: 17 to 35 lb Bond (64 gsm to 130 gsm) Double Parallel, Gate: 17 to 24 lb Bond (64 gsm to 91 gsm) Available Sizes in Fold Mode 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L, SRA3L, A3L, B4L, SRA4L, A4L, Custom Max " x 18.03" (305 mm x 458 mm) to min. 8.27" x 10.98" (210 mm x 279 mm) Straight Delivery Paper Weight in Straight Delivery Available Sizes in Straight Delivery Deliver sheets output from the main body to the primary (main) tray or secondary (sub) tray. 13 to 93 lb Bond (50 gsm to 350 gsm) 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"L/P, SRA3L, A3L, B4L, SRA4L/P, A4L/P, B5L/P, A5L/P, B6L, Foolscap, A6L, Custom, Tab Paper (only with the tab side ahead in output direction) Max. 13" x 19.2" (330 mm x 487 mm) to min. x 5.51" (100 mm x 140 mm) Paper Types in Post Inserter Plain, recycled, fine, special Paper Weight in Post Inserter 13 to 80 lb Bond (50 gsm to 300 gsm) Available Sizes in Post Inserter Stack Capacity of PI Upper/Lower Tray Dimensions Weight Power source Standard (detectable sizes): 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5" P, SRA3L, A3L, B4L, SRA4L/P, A4L/P, B5L/P, A5 P, Foolscap, Custom, Tab Paper Max. 13" x 19.2" (331 mm x 483 mm) to min. 7.17" x 10.98" (182 mm x 279 mm) 500 sheets (21 lb Bond) for each tray 15.75"*(W) x 28.46"(D) x 48.46"(H)"; (400* (W) x 723 (D) x 1,231 (H) mm) * Width including primary (main) tray: 26.26"/ 30.87" (with the edge pulled out) Approx lbs. (130 kg) 100 to 240 VAC; NEMA: 5-20R; See Power Source section for additional detailed image. 24

25 SD-506 RU-506 FD-503 FS-612 GP-501 Konica Minolta bizhub PRESS C1100/C1085 Component Considerations LS-506 Large Capacity Stacker Type Function Available sizes in primary (main) tray (straight/offset delivery) Available weight in primary (main) tray (straight/offset delivery) Available sizes in secondary (sub) tray Available weight in secondary (sub) tray Dimensions Weight Power source Power consumption Grip conveyer type horizontal stacking equipment Stacker tray Sort Deliver non-offset sets to the stacker tray. Secondary (sub) tray Deliver non-offset sets to the secondary (sub) tray. Stacker tray Offset Sort Offset sorted sets by 20 mm upon exit to the stacker tray. 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, SRA3L, A3L, B4L, SRA4L/P, A4L/P, B5P, A5P, Foolscap, 9" x 11"P, Custom (max. 13" x 19.2" (330 mm x 487 mm) to min. x 5.51" (100 mm x 140 mm)) Tab paper (1 to 15 tabs) (However, output sets cannot be offset when including tabbed sheets.) 17 to 68 lb. Bond (64 gsm to 256 gsm) 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"P, SRA3L, A3L, B4L, SRA4L, A4L/P, B5L/P, A5 L/P, B6L, Foolscap, A6L, 9" x 11"P, Custom, Tab Paper (only with the tab side ahead in output direction) Max. 13" x 19.2" (331 mm x 488 mm) to min. 3.74" x 5.47" (95 mm x 139 mm) 17 to 93 lb. (64 gsm to 350 gsm) 30.91"(W) x 28.46"(D) x (H); (785 (W) x 723 (D) x 1,020 (H) mm) Approx lbs. (110 kg) 100 to 240 VAC; NEMA: 5-20R; See Power Source section for additional detailed image. 143 W or less SD-506 Saddle Stitcher Type Delivery modes PI-502 Multi folding, folding and stapling, trimming, straight delivery Secondary (sub) tray delivery Deliver non-processed sheets to the secondary (sub) tray. Connective delivery Deliver non-processed sheets to another finishing equipment. Fold & Staple Output saddle-stitched sets. Fold & Staple with Trimming Output saddle-stitched and trimmed sets. Multi Half Fold Output a sheet or set of paper folded in half. Multi Half Fold with Trimming Output a sheet or set of paper half-folded and trimmed in the edge. Multi Tri-Fold Output a sheet or set of paper folded in three. continued PK

26 Component Considerations continued Multi folding Folding type Half fold, tri-fold Paper size Multi Half Fold: 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L, SRA3 L, A3L, B4L, SRA4L, A4L, B5L, Foolscap, Custom Max " x 18.23" (324 mm x 463 mm) to min. 7.17" x 10.12" (182 mm x 257 mm) Multi Tri-Fold: 8.5" x 11"L, A4L Paper weight 17 to 65 lb. Bond for half fold, 17 to 24 lb. Bond for tri-fold Number of sheets per folded set 5 sheets (17 to 22 lb. Bond) in half fold/tri-fold 3 sheets (23 to 24 lb. Bond) in tri-fold 3 sheets (23 to 34 lb. Bond), 2 sheets (35 to 65 lb. Bond) in half fold Stack capacity 30 sets for half fold 20 sets for tri-fold Provided with full-load detection function Folding and stapling Trimming Straight delivery Weight Power source Power consumption Paper size 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L, SRA3L, A3L, B4L, SRA4L, A4L, B5L, Foolscap, Custom Max " x 18.23" (324 mm x 463 mm) to min. 7.17" x 10.12" (182 mm x 257 mm) Paper weight 17 to 65 lb. Bond Binding pitch Variable (3.54" to 6.50" (90 to 165mm)) Paper size 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L, SRA3L, A3L, B4L, SRA4L, A4L, B5L, Foolscap, Custom Max " x 18.23" (324 mm x 463 mm) to min. 7.17" x 10.12" (182 mm x 257 mm) Paper weight 17 to 65 lb. Bond Trimming capacity 50 sheets (21 lb. Bond) x 2, or 49 sheets (21 lb. Bond) + 1 (53 lb. Bond) x 2 Paper size 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"L/P, SRA3L, A3L, B4L, SRA4L/P, A4L/P, B5 L/P, A5L/P, B6L, Foolscap, A6L, 9" x 11"P, Custom, Tab Paper (only with the tab side ahead in output direction) Max. 13" x 19.2" (330 mm x 487 mm) to min. x 5.51" (100 mm x 140 mm) Paper weight 17 to 93 lb. Bond Approx lbs. (280 kg) 100 to 240 VAC; NEMA: 5-20R; See Power Source section for additional detailed image. 270 W 26

27 Component Considerations PB-503 Perfect Binder Type Function Number of sheets per set Paper size Paper weight Paper type Stack capacity Warm-up time Dimensions Weight Power source Power consumption Console, hot-melt type perfect binder Perfect binding Output perfect-bound books to the perfect binder tray. Secondary (sub) tray Deliver non-processed sheets to the secondary (sub) tray. Connective delivery Deliver non-processed sheets to another finishing equipment (Finisher FS-521). 10 to 300 sheets, or within 30 mm thick 10 to 150 sheets, or within 15 mm thick for colored/matted paper Up to 4 sheets of z-folded insertions can be included in a set in duplex printing, up to 2 sheets in simplex printing. Perfect binder tray Body: 8.5" x 11"L, 5.5" x 8.5"L/P, A4P, B5P, A5L/P; max " x 8.70" (307 mm x 221 mm) to min. 5.47" x 8.23" (139 mm x 210 mm) Cover: max " x 8.70" (307 mm x 221 mm) to min. 5.47" x 8.23" (139 mm x 210 mm) Secondary (sub) tray 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"P, SRA3L, A3L, B4L, SRA4L/P, A4L/P, B5L/P, A5P, Foolscap, A6L, 9" x 11"P, Custom, Tab Paper (only with the tab side ahead in output direction) Max. 13" x 19.2" (330 mm x 487 mm) to min. x 5.51" (100 mm x 140 mm) Perfect binder tray 17 to 28 lb Bond (64 gsm to 105 gsm) for body 22 to 56 lb Bond (81 gsm to 210 gsm) for cover Secondary (sub) tray 17 to 93 lb Bond (64 gsm to 350 gsm) Perfect binder tray Plain, Fine for body, Fine, Coat for cover Secondary (sub) tray All types available in main body Cover tray 1,000 sheets (21 lb Bond)/ 500 sheets (57 lb Bond) Perfect binder tray 1 set of maximum thickness (approx. 1.18"/30mm) x 2 columns (approx. 6,600 sheets) The full-load detection function activated on perfect binder limits the capacity as follows in order to prevent the piled sets from collapsing. 10 to 30-sheet-bound set: 50 sets 31 to 150-sheet-bound set: 35 sets or until detected as full load 151 to 300-sheet-bound set: Until detected as full load Secondary (sub) tray 200 sheets (21 lb Bond) (with full-load detection function activated) Approx. 20 minutes 53.5"(W) x 30.51"(D) x 48.15"(H); (1,360 (W) x 775 (D) x 1,223 (H) mm) Approx. 594 lbs. (270 kg) AC120 V 60 Hz; NEMA: 5-20R; See Power Source section for additional detailed image. 1,000 W max. 27

28 Component Considerations continued PI-502 Post Inserter PI-502 Type Function Paper sizes Paper type Paper weight Stack capacity Dimensions Weight Power source Power consumption Paper feeding equipment with separable torque limiter Automatic Feed paper into the finisher on receiving a command from the main body. Manual Feed paper into the finisher on receiving a command manually sent from the control panel of the post inserter. Upper tray 8.5" x 11"L/P, 5.5" x 8.5"P, A4L/P, B5L/P, A5P, Custom (max. 8.50" x 11.70" (216 mm x 297 mm) to min. 7.17" x 5.47" (182 mm x 139 mm)) Lower tray 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"P, A3L, B4L, SRA4L, A4L/P, B5L/P, A5P, Foolscap, Custom (max " x 18.03" (314 mm x 458 mm) to min. 7.17" x 5.47" (182 mm x 139 mm)) Plain, Fine, Color, Coated 13 to 53 lb Bond (50 gsm to 200 gsm) 200 sheets (21 lb Bond) or within 30 mm thick for each of upper/ lower tray 20.12"(W) x 24.41"(D) x 8.66"(H), (511 (W) x 620 (D) x 220 (H) mm) Approx lbs. (10.5 kg) 24/5 VDC (supplied from Relay Unit RU-508) 30 W or less GP-501 Multi Punch (Die Set DS-501, DS-502, DS-503, DS-504, DS-505, and DS-506) Speed Up to 80 sheets per minute Punch Sheet Size 8.5" x 11" Punch Edge 11 Paper Stock Punch Capacity 20 lb. Bond to 80 lb. Cover, Letter/A4 and Letter/A4 Tab paper only. Single Sheet FS-612 GP-501 Power Supply 115V, 60Hz, Single Phase; NEMA 5-20R Electrical BTUs/Hour 1100BTU/HR; Watts 322W; Amps 2.8A HT-506 Safety Dimensions Weight Shipping Weight Power source TUV/GS, CE 12"(W) x 30.5"(D) x 40"(H); (305 (W) x 775 (D) x 1,020 (H) mm) Approx. 170 lbs. (80 kg) Approx. 270 lbs. (123 kg) See Power Source section for additional detailed image

29 Component Considerations GP-502Auto Ring Binder Speed bizhub PRESS 1250: 125 sheets/min. bizhub PRESS 1052: 105 sheets/min. Sheet size 8.5" x 11"P Bind edge 11 inches Book size (sheets) Smallest: 5 body sheets (20 lb. Bond) + 2 covers (57 lb. Bond) Largest: 100 body sheets (20 lb. Bond) + 2 covers (57 lb. Bond) Paper weight Body: 20 to 32 lb. Bond Cover: 44 to 57 lb. Bond Tabbed paper: 44 lb. Bond max. Bypass sheet size/weight Punch capacity Same as main body Single sheet Electrical 115 VAC 60 Hz, 2.2A Safety Dimensions Weight Shipping weight PI-502 TUV/GS, CE 25.7 (W) x 37.1 (D) x 41.3 (H) inches Approx. 403 lb. Approx. 514 lb. RU-510 Relay Unit (Required for GP-501 systems only) PK- 512 Function Layering conveyance function: Layers two copied/printed sheets, then reverses and conveys them to the finishing options in simplex copying/printing. Reversing conveyance function: Reverses copied/printed sheets and conveys them to the finishing options in simplex copying/printing. Conveyance function: Provides straight delivery in duplex copying/ printing. Conveyance speed SD-506 RU-506 FD-503 FS-612 Paper type GP sheets/min. (8.5" x 11"P/A4P) Plain, Fine, Coat, Blank Insert, Book/News, Embossed OHP transparencies and tracing paper are unavailable. HT-506 Paper weight Dimensions Weight Power source HT to 93 lb Bond (64 gsm to 350 gsm) 13.8"(W) x 30.5"(D) x 40.2"(H); (350 (W) x 775 (D) x 1,020 (H) mm) Approx lbs. (45 kg) Supplied from Relay Unit RU-508; See Power Source section for additional detailed image. PF-704 PF

30 Component Considerations continued Additional Component Considerations WT-512 Working Table LC-501 Large Capacity Stacker Handcart SK-601 Staple Kit (for Saddle Stitcher SD-506) SK-602 Staple Kit (for Saddle Stitcher SD-510) SK-703 Staple Kit (for Finisher FS-532) GC-501 Glue Chip (for Perfect Binder PB-503) UK-105 Upgrade Kit UK-206 Upgrade Kit (North America only) VI-507 Video Interface Kit AU-201 Authentication Unit (IC Card Type) Key Counter DS-501 to DS-507 Die Set (for Multi Puncher GP-501, Inch area) DS-508 to DS-518 Die Set (for Multi Puncher GP-501, Metric area) RB-101 Ring Binder Element (for Auto Ring Binder GP-502) 30

31 IC-308 Image Controller Type CPU Memory HDD Page-Description Language Printing Method Server Conforms with main unit specification 4 GB 1 TB PostScript 3 (3019), PDF 1.7,PPML 2.2, APPE, Adobe 2.5,PCL 5/6 emulation TCP/IP, SNMP, SMB, FTP, LPR, IPP, Bonjour Applicable OS Windows XP/Vista/7/8/Server 2003/ Server 2008 Server 2008 *1 Mac OSX 10.5/10.6/10.7/10.8 Interface 10/100/1000Base-T Scanner Resolution 200/300/400/600 dpi Data Format PDF, TIFF, JPEG Driver Twain Plug-in IC-310 Image Controller Fiery-Driven Engines Hardware and Platform File Format Support Fiery Color Technology Productivity and Workflow Performance *1: Including 64-bit versions. Konica Minolta bizhub PRESS C1100/ C1085, Supports engine finishing devices 2 x Intel Xeon Processor E (10M Cache, 3.30 GHz, Quad Core), 8 GB RAM memory, 2 x 1 TB HDD SATA, Internal DVD-RW Drive, 2 USB 3.0 ports in rear, 6 USB 2.0 ports: 2 front, 4 rear, Fiery System FS100 Pro, Windows 7 Professional for Embedded Systems x64 Adobe Postscript Levels 1, 2, 3, Adobe PDF, PDF/X-1a, 3 and 4, Encapsulated PostScript (EPS), MS Office document formats: doc, xls, ppt, pub (via Hot Folders), JPEG, DCS 2.0, CT/LW, 1-bit TIFF, TIFF, TIFF/IT, PDF2Go Fiery ColorWise color management technology, Fiery Calibrator, Fiery Spot On, PANTONE Libraries, Fiery Image Enhance Visual Editor, Auto Trapping, Image Smoothing, Fiery Graphic Art Package, Premium Edition (GAPPE): Fiery ImageViewer, Preflight, PostFlight, Control Bar, Paper Simulation, Halftone Simulation, 2 Color Print Mapping, Configurable Auto-Trapping, Graphic Arts Filters for Hot Folders, Progressives Fiery Command WorkStation 5, Fiery Drivers for Windows and Mac users, Fiery WebTools, Booklet Maker, Pad Printing, Fiery Hot Folders/Virtual Printers, Fiery Impose, Fiery Compose, Direct Mobile Printing, PrintMe Cloud Printing, GUI Enabled (FACI) HyperRIP, SmartRIP, Spool-RIP-print simultaneously Variable Data Printing JDF/JMF Support Adobe Interpreter Support Options Security Networking/ Connectivity EMC Safety Power Supply and Consumption Dimensions Supported file formats: Fiery FreeForm v1 enhanced and v2.1, PPML v3.0, PDF/VT 1 and 2, VPS compatible; Record and set level finishing support, VDP record range printing, Define record length, VDP raster preview, VDP Resource Manager JDP v1.3 Integrated Digital Printing (IDP) ICS certified, CIP4 certification number , EFI MIS and Web-to-Print integration ready, Prepress Workflow Integration (Agfa Apogee, Kodak Prinergy, Heidelberg Prinect) CPSI version 3020, Adobe PDF Print Engine 2.5 Fiery Color Profiler Suite, EFI ES-2000 Spectrophotometer, Fiery JobMaster, Fiery JobFlow, Fiery Integrated Workstation: Fiery stand, 22 display, keyboard, mouse, Removable Hard Disk Drive Secure Erase, Network Protection: 802.1x Support, MAC filtering, IP Filtering, Port, SSL Support (IPP/LDAP/HTTP/ POP/SMTP), Certificate Management, Self-signed certification; LDAP, Secure Printing TCP/IP, AppleTalk, Bonjour Support, SNMP, Port 9100, IPP, FTP, SMB, WSD, Point and Print, Print via (PS/PDF), IPv6 FCC (Canada and US), C-TICK (Australia and New Zealand), CE Mark (EU), VCCI (Japan), NEMKO, KCC (Korea), BSMI (Taiwan), CCC (China) TÜV/CU Mark (Canada and US), TÜV/GS Mark (EU), CE Mark (EU), CB Scheme, NEMKO, CCC (China) Auto-switching: VAC, 50/60 Hz, 8 VAC, 4 VAC, Maximum power usage: 550W, Typical power usage: 200W 22.7" (H) x 8.4" (W) x 23.2" (D), 576mm (H) x 212mm (W) x 588mm (D) 31

32 IC-602 Konica Minolta Image Controller Type AIO to the engine (optional) Function Resolution: Print: 1200 x 1200 dpi, 600 x 600 dpi Scan: 200 x 200 dpi, 300 x 300 dpi, 400 x 400 dpi, 600 x 600 dpi Gradation: RIP: 8bit/256 gradations, 1bit/2 gradations (writing to the machine: equivalent to 256 gradations) Print Quantity 1 to 9999 Continuous bizhub PRESS C1100 (Color/Black): Print Speed 100 sheets/min. (A4P, 8.5" x 11"P), 78 sheets/min. (8.5" x 11"L) bizhub PRESS C1085 (Color/Black): 85 sheets/min. (A4P, 8.5" x 11"P), 68 sheets/min. (8.5" x 11"L) Page Description Language Printer Driver Supported Print Method Paper Size Supported Paper Type Paper Weight CPU Memory SSD HDD Adobe PostScript3 (PS3020), PDF Direct Print (PDF Ver. 1.7), APPE (Ver2.6), PDF/VT (Ver2), TIFF Direct Print (TIFF Ver. 6 compliant), PPML (Ver. 2.2), PCL5c compatible, PCL XL (PCL6 Ver. 3) compatible PS Plug-in: Windows XP/Server 2003/Vista/Server 2008/Server 2008 R2/8/Server 2012 *1 Mac OSX 10.5/10.6/10.7/10.8 (PPC/Intel) PPD *2 : Windows XP/Server 2003/Vista/Server 2008/Server 2008 R2/8/Server 2012 *1 Linux CUPS Pserver (IPX/SPX), LPD/LPR (TCP/IP), IPP (TCP/IP), AppleTalk (EtherTalk), Bonjour (TCP/IP), Web service print (TCP/IP), NPrinter/RPrinter (IPX/SPX), Raw Port (TCP/IP), SMB Depends on the machine Depends on the machine Depends on the machine Intel Core i GHz Max. 16 GB Composition: 4 GB (machine standard) + 12 GB (IC-602 Kit C) 2 GB Max. 2.5 TB Composition: 500 GB 5 (IC-602 Kit C) Interface Ethernet (1000Base-T / 100Base-T / 10Base-T) IPv6 supported, USB Humidity Depends on the machine Operating Temperature Depends on the machine *1: Including 64-bit versions. *2: WHQL is not obtained for the PPD driver. 32

33 How to Build a bizhub PRESS C1100/C1085 Full Color Digital Press (from start to finish) *1: Paper Feeder Unit PF-708 is mounted with a reverse automatic document feeder (ADF) and a scanner. *2: Image Controller IC-602 and Image Controller IC-308, or Image Controller IC-602 and Image Controller IC-310 cannot be mounted together for use. 33

34 How to Build a bizhub PRESS C1100/C1085 Full Color Digital Press (from start to finish) continued *1: Paper Feeder Unit PF-708 is mounted with a reverse automatic document feeder (ADF) and a scanner. *2: Image Controller IC-602 and Image Controller IC-308, or Image Controller IC-602 and Image Controller IC-310 cannot be mounted together for use. 34

35 How to Build a bizhub PRESS C1100/C1085 Full Color Digital Press (from start to finish) *1: Paper Feeder Unit PF-708 is mounted with a reverse automatic document feeder (ADF) and a scanner. *2: Image Controller IC-602 and Image Controller IC-308, or Image Controller IC-602 and Image Controller IC-310 cannot be mounted together for use. 35

36 How to Build a bizhub PRESS C1100/C1085 Full Color Digital Press (from start to finish) continued *1: Paper Feeder Unit PF-708 is mounted with a reverse automatic document feeder (ADF) and a scanner. *2: Image Controller IC-602 and Image Controller IC-308, or Image Controller IC-602 and Image Controller IC-310 cannot be mounted together for use. 36

37 How to Build a bizhub PRESS C1100/C1085 Full Color Digital Press (from start to finish) *1: Paper Feeder Unit PF-708 is mounted with a reverse automatic document feeder (ADF) and a scanner. *2: Image Controller IC-602 and Image Controller IC-308, or Image Controller IC-602 and Image Controller IC-310 cannot be mounted together for use. 37

38 How to Build a bizhub PRESS C1100/C1085 Full Color Digital Press (from start to finish) continued *1: Paper Feeder Unit PF-708 is mounted with a reverse automatic document feeder (ADF) and a scanner. *2: Image Controller IC-602 and Image Controller IC-308, or Image Controller IC-602 and Image Controller IC-310 cannot be mounted together for use. 38

39 How to Build a bizhub PRESS C1100/C1085 Full Color Digital Press (from start to finish) *1: Paper Feeder Unit PF-708 is mounted with a reverse automatic document feeder (ADF) and a scanner. *2: Image Controller IC-602 and Image Controller IC-308, or Image Controller IC-602 and Image Controller IC-310 cannot be mounted together for use. 39

40 How to Build a bizhub PRESS C1100/C1085 Full Color Digital Press (from start to finish) continued *1: Paper Feeder Unit PF-708 is mounted with a reverse automatic document feeder (ADF) and a scanner. *2: Image Controller IC-602 and Image Controller IC-308, or Image Controller IC-602 and Image Controller IC-310 cannot be mounted together for use. 40

41 How to Build a bizhub PRESS C1100/C1085 Full Color Digital Press (from start to finish) *1: Paper Feeder Unit PF-708 is mounted with a reverse automatic document feeder (ADF) and a scanner. *2: Image Controller IC-602 and Image Controller IC-308, or Image Controller IC-602 and Image Controller IC-310 cannot be mounted together for use. 41

42 How to Build a bizhub PRESS C1100/C1085 Full Color Digital Press (from start to finish) continued *1: Paper Feeder Unit PF-708 is mounted with a reverse automatic document feeder (ADF) and a scanner. *2: Image Controller IC-602 and Image Controller IC-308, or Image Controller IC-602 and Image Controller IC-310 cannot be mounted together for use. 42