Linear Kiosk 05. features and benefits: dimensions: additional information:

Transcription

1 Linear Kiosk 05 LN-K-05 Dress up and add wow to your space with state-of-the-art multimedia kiosks. features and benefits: - Custom appearance - Easy to assemble - Bases & tops available in four color optons - Aluminum construction: vertical extrusions 50 mm x 50 mm - Installation tool included - Comes with your choice of frosted plex or PVC graphic panels - Kit includes one OCH case - Lifetime hardware warranty against manufacturer defects dimensions: Hardware Assembled unit: 25.4 w x 72 h x 18.5 d 646mm(w) x 1830mm(h) x 471mm(d) Shipping Shipping dimensions - ships in one case: OCH case: 50 l x 29 w x 12 h 1270mm(l) x 737mm(w) x 305mm(h) Approximate shipping weight (entire kit): 60 lbs / 27.21kgs Graphic Total visual area: Left panel: w x h 387mm(w) x 816mm(h) Right panel: w x h 387mm(w) x 816mm(h) Center panel: 18 w x h 457mm(w) x 790.5mm(h) Refer to related graphic template for more information Visit: graphic-templates additional information: Panel materials: Single-sided frosted acrylic or printed PVC Base & table top color options: silver black mahogany natural Kiosk table holds max 25 lbs / 11.3 kgs Easy locking panel storage space Small LCD monitor mount included: Monitor mount supports monitor size range Max monitor weight 40 lbs. We are continually improving and modifying our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications. 10/12/2016

2 Parts Included Part Code PHFC2-150-L PM2R8-50 PH4-200 LN-K-TBL1* LN-K-TBL2* PH-457-L-L PM2R8-MCAP PM2R8-839-L PM2R8-900-A LN-G-K-05A* LN-G-K-05B* PH4SC-300 LN100 EXT-SM-MB WME-800 ALLEN KET SET OCH Qty. x4 Part Description 150MM PHFC2 W/ONE LOCK AND CAP PM2R8 50MM (2 ) BASE PH4 200MM (7.875 ) WITH TENSION GLIDES PINED TO PM2R8-50 LINEAR KIOSK TABLE COUNTER 1 LINEAR KIOSK TABLE 2 457MM (17.9 ) PH EXTRUSION WITH LOCKS 2 ENDS PM2R8 GREY MOLDED CAP 839MM (33 ) 50MM PM2R8 8 WAY ROUND EXTRUSION 900MM (35.43 ) 50MM PM2R8 8 WAY ROUND EXTRUSION WITH STOP AT 155MM LINEAR KIT 5 GRAPHIC PANEL A LINEAR KIT 5 GRAPHIC PANEL B 300MM PH4SC WITH TENSION GLIDES LINEAR JOINING BAR FLATSCREEN BLACK LINEAR LCD MONITOR MOUNT FOR SMALL WME 800MM (31.5 ) WIRE MANAGEMENT EXTRUSION ALLEN KEY MULTI-TOOL OCH SHIPPING CASE 1.

3 Step 1. Step 2. 2.

4 Step 3. Step 4. 3.

5 Step 5. Step 6. 4.

6 Monitor Bracket Instructions Extrusion Channel Applications EXT-SM-MB Sizes: Max weight varies per application EXT-M-MB Sizes: Max weight varies per application EXT-LG-MB Sizes: Max weight varies per application Included hardware: LN-100 LN-LCD-SCW Square Bolt Wingnut

7 EXTRUSION CONNECTION Channel Connection A 1 2 Channel Connection B 3 4 Locate all components needed to assemble the monitor mount with the channel connection A method. You will need (1) monitor bracket, (2) square head bolts, (2) washers, and (2) wingnuts. Step 1: Apply pressure to the rear side of the leveling gauge clipped into the monitor mount to remove it. Step 2: Insert the provided bolts through the washers and center top and bottom holes of the monitor mount. Loosly thread your wingnuts onto the end of the bolts.step 3: Slide the bolt heads down the extrusion channel. Step 4: Tighten your wingnuts to lock the monitor bracket in place. Step 5: Reference the included manufacturer monitor mount instructions for fastening your monitor to the bracket Locate all components needed to assemble the monitor mount with the channel connection B method. You will need (1) monitor bracket, (2) LN-LCD-SCW, (2) LN-100, and (2) washers. Step 1: Apply pressure to the rear side of the leveling gauge clipped into the monitor mount to remove it. Step 2: Loosly thread the LN-LCD-SCW screws through the washers, the center top and bottom holes of the monitor bracket, and through the LN-50 holes.step 3: Slide the LN-100s down the extrusion channel. Step 4: Tighten your LN- LCD-SCW to lock the monitor bracket in place. Step 5: Reference the included manufacturer monitor mount instructions for fastening your monitor to the bracket. TRI-30MM Channel Tube Connection Locate all components needed to assemble the monitor mount with the TRI-30MM Channel Tube Connection method. You will need (1) monitor bracket, (2) Square Bolts, and (2) Wingnuts. Step 1: Slip the head of the square bolts into the extrusion channel of the tube. Step 2: Apply your monitor bracket to the protruding square bolts. Step 3: Lock your monitor bracket to the square bolts using the provided wingnuts. Step 4: Reference the included manufacturer monitor mount instructions for fastening your monitor to the bracket.