velocity standard 06 velocity features and benefits: dimensions: additional information:

Transcription

1 velocity standard 06 V-S-06 Chic and robust - a highly-structural portable 10 x20 exhibit that emphasizes your identity and message seamlessly with a combinaton of fabric graphics, rigid accents and accessories. features and benefits: - Custom appearance - Easy to assemble - Combination of rigid and fabric graphics - Aluminum construction: vertical extrusions 50mm x 100mm and 100mm x 100mm center post - Lifetime hardware warranty against manufacturer defects dimensions: Hardware Assembled unit: (w) x (h) x 39.5 (d) approx mm(w) x 2416mm(h) x 1003mm(d) Tabletop: 21.2 (w) x 40.5 (h) x 19.7 (d) approx mm(w) x 1029mm(h) x mm(d) Shipping Shipping dimensions - ships in 4 cases Each WMC12x6 case: 52 (l) x 30 (w) x 15 (h) mm(l) x 762mm(w) x 381mm(h) Approximate shipping weight (entire kit): 430 lbs / 195 kgs additional information: - Installation tool included - Canopy color white - Kit includes one frame, three bow-leg tables, one 2-piece graphic header, four wings, four roller graphic panels, four 50 watt spotlights, three monitor brackets, and four WMC12x6 molded cases Graphic Panel A: Total visible area: w x h 1176mm(w) x mm(h) Panel B & C: Total visible area: 34.5 w x h 876.3mm(w) x mm(h) Panel D: Total visible area: w x h 1176mm(w) x mm(h) Wings: Total visible area: w x 40 h 282.6mm(w) x 1016mm(h) Header: Total visible area: 74 w x 14 h mm(w) x 355.6mm(h) Refer to related graphic template for more information Graphic materials: dye-sublimated fabric & UV prints on 6mm sintra Table holds max weight 25 lbs / 11 kgs Tabletop colors: silver black mahogany natural Wings can be upgraded to frosted plex Large monitor mount max weight: 50 lbs / 23 kg Small monitor mount max weight: 25 lbs / 11 kg Lights included: LV1 50 watt, low voltage spotlight, curved arm, silver finish, 19.5 from end to end Curved white sintra infills can be upgraded to UV prints on 3mm sintra Canopy can be upgraded to printed dye-sublimated graphic velocity 2014 Nimlok Display and Exhibit Solutions Worldwide For questions contact your local Nimlok distributor

2 Parts included Part label Qty Part code Part label Qty Part code VE-01 x6 PM4S A-A VE-09 x2 PH S-S VE-10 x2 PH2-900-S-S VE-13 x7 PH2C-1 VE-17 x3 PH-300-S-S VE-20 x2 PH-90-S VE-41 x6 PM4S3-900 VE-60 infill x4 White 3mm sintra VE-53 panel A x1 PM4-RB4 VE-54 panel B x1 PM4-RB3 VE-54 panel C x1 PM4-RB3 VE-53 panel D x1 PM4-RB4 Header - 2 piece x1 - Wing x4 - VE-42 x1 PM4S A-A Graphic clip x18 CTC8 VE-43 x1 PM4S2-900 VE-52 x6 PH-1RN-L-L VL-03 x3 V-LG-03 Canopy x1 V-S-CAN-01 Light x4 LV1-CLP-LIGHT Lg. monitor mount x1 LM-MB V-WS-CT-01 x3 V-WS-CT-01 Sm. monitor mount x2 OR-OPT1-B Standoff x8 PANEL CLAMP Step stool x1 STEP STOOL Tool kit x1 V-TK-01 Steamer x1 FABRIC STEAMER-ES 20'-0" [6096mm] 10'-0" [3048mm] 1.

3 Step 1. Connect a VE-10 to either side of the VE-42 using attachment detail below. Attach a VE-01 to ends of each VE-10. Attach the VE-52s to back channel of VE-01s as shown in diagram. Complete by attaching outer VE-01s. VE-01 VE-01 VE-01 CHANNEL ORIENTATION VE-42 VE-01 WITH S ITH S HORIZONTAL BY WITH S WITH S VE-52 ITH S ITH S VE-10 VE-52 VE-10 HORIZONTAL BY HORIZONTAL BY 2.

4 Step 2. Slide outer VE-60 infills into the channel of the VE-01s/VE-52s as shown in diagram below. VE-60 INFILL VE-60 INFILL 3.

5 Step 3. Attach VE-52s to the VE-01s, securing infill, using attachment detail shown. Slide VE-13 internal connectors into VE-01/VE-42 uprights using detail shown. VE-13 WITH S ITH S VE-13 VE-13 VE-13 VE-52 VE-13 HORIZONTAL BY VE-52 WITH S ITH S HORIZONTAL BY POST W/ STOP Tension Glides TOP BOTTOM STOP STOP 4.

6 Step 4. Slide upper VE-41s/VE-43 over the VE-13 internal connectors as shown. Attach VE-54s to the uprights as shown in detail. Insert clips into VE-10 s where VE-41 designated and turn clockwise to tighten. Pull graphics down from VE-54s and snap rods into clips. When removing, never pull on the graphic, always pull on the graphic rod. VE-41 POST W/ STOP Tension Glides TOP IT H S VE-41 VE-43 VE-54 VE-54 PANEL C PH VE-41 VE-54 PANEL B W/ VELCRO ON FACE W/ VELCRO ON FACE STOP BOTTOM STOP HORIZONTAL BY BOTTOM GRAPHIC CLIP Dyesub Graphic Graphic Rod CLIP WITH S The CLIP locations are represented by orange dots on the drawings. 5.

7 Step 5. Slide VE-60 upper infills into the channels of the VE-01s and lower VE-52s. Attach upper VE-52s to the VE-01s, securing infills, using attachment detail below. VE-52 WITH S VE-52 ITH S VE-60 HORIZONTAL BY INFILL VE-60 WITH S INFILL ITH S HORIZONTAL BY 6.

8 Step 6. To attach monitor mount, slide square head bolts on back of mount down middle channel of designated VE-01 upright to desired height and tighten using attachment detail below. MONITOR MOUNT LARGE MONITOR MOUNT SQUARE HEAD BOLTS INTO CHANNEL VERTICAL VERTICAL LARGE MONITOR MOUNT 7.

9 Step 7. Attach headers to VE-54s using the attached velcro. HEADER W/ VELCRO ON THE BACKSIDE HEADER W/ VELCRO ON THE BACKSIDE 8.

10 Step 8. Lock VE-20s into center channel of VE-54s to support lights. Slide two lights onto clamps and place over VE-20s as shown in detail below. LIGHT LIGHT VE-20 VE-20 BACK VIEW LV1 Light LIGHT Light clip Vertical Slide the light onto the light clip, then slide the light clip on TOP the vertical. 9.

11 Step 9. Assemble the canopy by connecting the pieces following the numbered labels. Clean the frame and place it on a clean surface. Carefully remove the graphic and place it around the bottom of the frame, slits on underside of graphic. Pull the cover carefully over the frame and close all zippers. When breaking system down, be sure to fold or roll the graphic neatly and place in bag. Screw supplied plates to the top of designated VE-01s as shown in detail below. Slide completed canopy onto tube secured to the plate. CANOPY Frame Assembly Assemble frame as shown PART LIST: PER UNIT 7 30MM DIA. TUBE SECTIONS Step 1 Assemble frame in numerical order as shown on right. Numbers will be on the bac side of the tube. 1 5 Step. Stretch fabric o er frame. hen wor ing with fabric use glo es or clean hands and eep fabric awa from dirt surfaces. 7 ull fabric o er frame and secure with ipper.. #8 SHEET METAL SCREW REQUIRED W/MINIMUM OF 3/4" LENGTH TO SCREW THE PLATE TO THE 30MM TUBE #8 SCREW PLATE VERTICAL 10.

12 Step 10. Attach VE-09s to bottom of outer VE-01s using attachment detail shown below. Connect a VE-01 to the outside of each VE-09. Slide VE-13 internal connectors into the VE-01s using attachment detail shown below. Slide upper VE-41s over the VE-13 internal connectors. Attach VE-53s to the VE-41 uprights as shown in detail. Insert clips into VE-09 s where designated and turn clockwise to tighten. Pull graphics down from VE-53s and snap rods into clips. When removing, never pull on the graphic, always pull on the graphic rod. VE-53 VE-41 VE-13 VE-41 VE-53 VE-01 VE-13 VE-01 VE-09 WITH S ITH S VE-09 POST W/ STOP Tension Glides TOP ITH S Dyesub Graphic BOTTOM PH Graphic Rod CLIP BOTTOM STOP WITH S STOP HORIZONTAL BY HORIZONTAL BY The CLIP locations are represented by orange dots on the drawings. 11.

13 Step 11. Attach VE-17s to back side of table leg as seen in locking detail below. Attach VE-17s, with legs attached, to VE-41/VE-43 uprights. Attach V-WS-CT-01 tabletops to table legs using connector detail below. VE-17 V-WS-CT-01 VE-17 VE-17 V-WS-CT-01 V-WS-CT-01 VL-03 VL-03 VL-03 TO LEG LEG 5mm Hex key Tool Place LEG and lock horizontal extrusions by using 5mm hex key tool. Insert the thumb connector into the bottom of the counter top and make a 1/4 turn clockwise to tighten in place. 12.

14 Step 12. Attach four standoffs to the outside channel of designated VE-01 uprights using detail below. Attach wings to the standoffs using detail below. To attach monitor mounts, slide square head bolts on back of mount down middle channel of designated VE-01 uprights to desired height and tighten using attachment detail below. WING GRAPHIC E MONITOR MOUNT WING GRAPHIC E MONITOR MOUNT WING GRAPHIC E SMALL MONITOR MOUNT WING GRAPHIC E S U RE O T IN NU T PANEL CLAMP: Screw the PANEL CLAMP clockwise into the VE-36 channel until it is tight. Loosen the THUMBSCREW, place rigid sintra panel graphic and tighten in place. Slide the square bolts into the channel of the. Once the monitor mount is at the desired postion turn the wing nuts clockwise to secure the monitor mount to the extrusion. 13.

15 Step 13. Slide two lights onto clips and place in middle channel of VE-53s as shown in detail below. LIGHT LIGHT LIGHT W/ CLIP LV1 Light Light clip 1- Slide light clip onto the LIGHT. 2-Then slide the LIGHT into the channel at an angle and then gently lower down. 14.

16 check out these related products: velocity standard 01 velocity standard 02 velocity standard 03 velocity standard 04 velocity standard 05 velocity standard 06 velocity standard 07 velocity standard 08 Redesign of this exhibit without approval by Nimlok may result in dangerous and unsafe structures. Nimlok disclaims any responsibility for redesigned exhibits it does not approve in writing. Parts and components such as panels and extrusions are manufactured to metric sizing. We continue to improve and modify our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications.