2 : % VOC-compliant clear 2 : % Clear Mixing ratio 100% by vol Film thickness: µm.

Transcription

1 Application: Drying accelerator for Glasurit standard clears (VOC-compliant and non-voc-compliant), Line, Line VOC, VOC MC600, and 85- HS-Primerfiller / Filler Properties: Reduction of drying times Improves surface drying and curing performance as well as tape resistance Remarks: No add of Racing Additive in 85- Primerfiller / Filler at temperatures > 5 C possible, due to too short potlife Clear coat : % VOC-compliant clear : % Clear Mixing ratio 100% by vol % by vol Hardener 50% by vol , , -93 Reducer 10% by vol. 10% by vol. Number of spraycoats 16 s, depending on product used Potlife at 0 C: min., depending on product used bar / 0.7 bar at the nozzle Compliant gravity-feed gun Film thickness: µm Drying at 0 C , -115, h 4 h Film thickness: , , µm 1 h 3 h Drying at 60 C , -115, min. 0 min , min. 0 min. Infrared (short wave) Infrared (medium wave)

2 Clear coat 3 : 1 : 1 VOC-compliant clear Mixing ratio 100% by vol Hardener 33% by vol , -63 Reducer 33% by vol s, depending on product used Potlife at 0 C: min., depending on product used Number of spraycoats Film thickness: µm Flash-off at 0 C Drying at 60 C Drying at 40 C Drying at 0 C approx. 3 min intermediate flashoff when two spraycoats are applied min, improved polishability 30 min 3-4 h 15-0 min min 4 h 0 min - 4 h

3 Line VOC and Line : % Line VOC : % Line Mixing ratio 100% by vol. Line VOC 100% by vol. Line Hardener 50% by vol , % by vol , -93 Reducer 10% by vol. 10% by vol. 0 4 s, depending on product used Potlife at 0 C: 30 min. intermediate flash-off app. 5 min. intermediate flash-off app. 5 min. Number of spraycoats can be applied to vertical surfaces (no flash-off between coats required) Film thickness: app. 50 µm can be applied to vertical surfaces (no flash-off between coats required) Film thickness: app. 50 µm Drying at 0 C 4 h 4 h Drying at 60 C 0 min. 15 min. Infrared (short wave) Infrared (medium wave)

4 VOC MC600 3 : 1 : 1 VOC MC600 Mixing ratio 100% by vol. VOC MC600 Hardener 33% by vol , -63 Reducer 33% by vol. 0 4 s, depending on product used Potlife at 0 C: 30 min. Number of spraycoats intermediate flash-off app. 5 min. can be applied to vertical surfaces (no flash-off between coats required) Film thickness: app. 50 µm Drying at 0 C 4 h 4 h Drying at 60 C 0 min. 15 min. Infrared (short wave) Infrared (medium wave)

5 HS-Primerfiller / Filler 4 : 1 : 1 HS-Primerfiller 3 : 1 : 1 Non-Sanding-Filler Mixing ratio 100% by vol % by vol Hardener 5% by vol , % by vol / -55 Reducer 5% by vol. 33% by vol. Number of spraycoats 14 s, depending on product used Potlife at 0 C: min., depending on product used HVLP gun: mm bar / 0.7 bar at the nozzle mm,.0 bar Film thickness: μm Film thickness: Drying at 0 C 1,5 h 10 min. (*) 0 35 μm Drying at 60 C 10 min. - Infrared (short wave) 4 min. - Sanding: manual P400 - P600 (*) If the recommended drying time is exceeded by more than 0 min, the panel has to be lightly scuff-sanded. Sanding: orbital sander P400 - P500 -

6 Primerfiller 4 : 1 : 1 Mixing ratio 100% by vol Hardener 5% by vol , -56 Reducer 5% by vol. 0 4 s, depending on product used Potlife at 0 C: 0 min. HVLP gun: mm mm,.0 bar Number of spraycoats Drying at 0 C 1,5 h Drying at 60 C 15 min. Infrared (short wave) - Sanding: manual P800 Sanding: orbital sander P400 - P500