SSL Connector. Range Overview SSL 1.1. Board to Board. Wire to Wire. Board to Wire. Right Angle & Straight. Right Angle
|
|
|
- Michael Barrett
- 6 years ago
- Views:
Transcription
1
2 ALTW SSL Connector I Range Overview SSL SSL Connector SSL 1.3 SSL 2.3 SSL 1.1 SSL 2.1 SSL 1.2 (IP 68) Range Overview SSL 1.1 Board to Board Right Angle Straight Right Angle & Straight ALTW ALTW ALTW ALTW Board to Wire Wire to Wire ALTW ALTW ALTW ALTW 9-1 Amphenol LTW Technology Co., Ltd.
3 SSL Connector I Range Overview SSL SSL 1.2 (IP 68) Wire to Board Wire to Wire SSL 1.3 The Bridge Jumper SSL 2.1 Inverted Thru Board Receptacle LED Modular Board LED Driver Board SSL 2.3 EZ-B for E26/27 Bulb Screw Base Note Design and specification are subject to change without notice. Innovation in Waterproof Solution 9-2
4 SSL Connector I Specification I SSL 1.1 Specification SSL 1.1 Iden tificatio n s SSL 1.1 DC Connector Descr ip tio n C ur r en t Ratin g / Data Board to Board Board to Wire Wire to Wire 3A per pin (2, 4 & 6 pins available) Vo ltage Ratin g M ater ial Temp er atur e Ran ge C o n tact Resistan ce In sulatio n Resistan ce Dur ab ility Br eakd o wn Vo ltage Max100 VAC / VDC Contact: Copper Alloy, Copper Alloy, Gold over Nickel Plated Housing: Thermoplastic, UL 94V-0 Rated Hood: Thermoplastic, UL 94V-0 Rated Lock: Nylon (PA66), UL 94V-0 Rated SR: PP, UL 94V-0 Rated UL recognized wire & flat cable available PCB Mount: -40 C ~105 C Wire Assemblies: -40 C ~100 C 20m Ω 1000MΩ at 250Vdc 100 cycles 1200 Vac M o r e to kn o w UL1977 / cul / CSA C Amphenol LTW Technology Co., Ltd.
5 SSL Connector I Ordering Information I SSL 1.1 Ordering Information SSL Connector Series (11) SSL 1.1 None Waterproof Series Connector (Housing) Gender (J) Jack Number of Contacts 2,4, 6 contacts e.g. (2) = 2 Contacts Connector Type (A) SMT Board Straight with Post (C) SMT Board Right Angle with Post (D) SMT Board Right Angle without Post Wires Assembly Options (00) For PCB Mount Type Lock Option (0) None (Without Lock) (B) W2B Lock in End 1 (W) W2W Lock in End 1 (D) With Two W2B Lock (P) Plug > For Wire Assembly (L) Wire Assembly, Straight, With SR > For Wire Assembly (2J) 2-End Jack Connector (2P) 2-End Plug Connector (JP) End 1: Jack, End 2: Plug, (J0) End 1: Jack, End 2: Open (P0) End 1: Plug, End 2: Open (T) With Two W2W Lock (S) W2B Lock in End 1, W2W Lock in End 2 Wire Size (00) Applicable for SMT Board Wire Assembly / Wires Type (001), (002) Without Wire : Different Versions > For Wire Assembly (22) 22 AWG Wire to Board Lock (W2B Lock) > For Wire Assembly ( )+( ) : Wire Type + Wire Length e.g. (A01) = UL recognized wire + 10cm Wire to Wire Lock (W2W Lock) ( ) : Wire Type (A) UL recognized wire (D) UL recognized flat cable ( ) : Length From 100mm~9900mm e.g. (01) = 100mm, (02) = 200mm, (03) = 300mm... *Every 100mm as per extension Note Design and specification are subject to change without notice. Innovation in Waterproof Solution 9-4
6 SSL Connector I Physical Dimension I SSL 1.1 PCB Mount Wire Assemblies Physical Dimension SSL 1.1 PCB Mount > Right Angle 2.0 >> 2P Recommended PCB Layout Unit: mm >> 4P Recommended PCB Layout Unit: mm >> 6P Recommended PCB Layout Unit: mm 9-5 Amphenol LTW Technology Co., Ltd.
7 SSL Connector I Physical Dimension I SSL 1.1 PCB Mount Wire Assemblies PCB Mount > Straight >> 2P Recommended PCB Layout Recommended PCB Layout Unit: mm >> 4P Recommended PCB Layout Recommended PCB Layout Unit: mm >> 6P Recommended PCB Layout Recommended PCB Layout Unit: mm Note Design and specification are subject to change without notice. Innovation in Waterproof Solution 9-6
8 SSL Connector I Contact Configuration I SSL 1.1 PCB Mount Wire Assemblies Wire Assembly >> Flat Cable W H L0 L L0 >> Wire W H L0 L L0 H W 2P P Cable Length (L) Various cable length available upon request 6P Unit: mm 9-7 Amphenol LTW Technology Co., Ltd.
9 SSL Connector I Find Our Standard Products I SSL 1.1 Board to Board Find Our Standard Products SSL 1.1 Board to Board > Right Angle 4 PCB Mount (Right Angle) ; With post (C) or without post (D) 4 PCB Mount (Right Angle) ; With post (C) or without post (D) Plug Jack 2P 4P 6P SSL11-P SSL11-J SSL11-P SSL11-J SSL11-P SSL11-J Board to Board > Straight 2P 4P 6P Plug SSL11-P2A SSL11-P4A SSL11-P6A Jack SSL11-J2A SSL11-J4A SSL11-J6A Note Design and specification are subject to change without notice. Innovation in Waterproof Solution 9-8
10 SSL Connector I Find Our Standard Products I SSL 1.1 Board to Board Board to Wire Board to Board > Right Angle & Straight Right Angle Straight Straight Right Angle PCB Mount (Right Angle) ; With post (C) or without post (D) 4 4 PCB Mount (Straight) : With post (A) PCB Mount (Right Angle) ; With post (C) or without post (D) PCB Mount (Straight) : With post (A) Plug Jack 2P 4P 6P SSL11-P SSL11-J SSL11-P SSL11-J SSL11-P SSL11-J Board to Wire 2P 4P 6P Right Angle Plug 4 PCB Mount (Right Angle) ; With post (C) or without post (D) Mount Type End 1 + End 2 Cable Type Part Number SSL11-P SSL11-P SSL11-P Jack + Open End Wire SSL11-J2LJ0-B22AXX* SSL11-J4LJ0-B22AXX* SSL11-J6LJ0-B22AXX* *XX: Please choose the cable length from 100mm ~ 9900mm e.g. (01) = 100mm, (02) = 200mm, (03) = 300mm... *Every 100mm as per extension 9-9 Amphenol LTW Technology Co., Ltd.
11 SSL Connector I Find Our Standard Products I SSL 1.1 Board to Wire Wire to Wire Board to Wire 2P 4P 6P Wire to Wire 4 PCB Mount (Right Angle) ; With post (C) or without post (D) Mount Type Jack End 1 + End 2 Cable Type Part Number Right Angle Jack SSL11-J SSL11-J SSL11-J Plug + Open End Wire SSL11-P2LP0-B22AXX* SSL11-P4LP0-B22AXX* SSL11-P6LP0-B22AXX* *XX: Please choose the cable length from 100mm ~ 9900mm e.g. (01) = 100mm, (02) = 200mm, (03) = 300mm... *Every 100mm as per extension Plug + Open End Jack + Open End Plug + Jack Jack + Plug Plug + Plug Jack + Jack Cable Type Contacts 3 End 1 + End 2 Lock Part Number End 1 + End 2 Lock Part Number Wire Flat Cable 2, 4, 6 Plug + Open End Plug + Jack Plug + Plug No Lock One Lock Two Locks Two Locks No Lock SSL11-P SSL11-P SSL11-P SSL11-P SSL11-P LP0-022AXX* LP0-W22AXX* LJP-T22DXX* L2P-T22DXX* L2P-022DXX* Jack + Open End Jack + Plug Jack + Plug One Lock No Lock No Lock No Lock No Lock SSL11-J SSL11-J SSL11-P SSL11-J SSL11-J LJ0-022AXX* LJ0-022AXX* LJP-022DXX* L2J-022DXX* L2J-T22DXX* Note Design and specification are subject to change without notice. Innovation in Waterproof Solution 9-10
12 SSL Connector I Ordering Information I SSL 1.2 Specification SSL 1.2 Identifications SSL 1.2 Connector, IP 68 Waterproof Rated Description Board to Wire Wire to Wire Current Rating / Data Material Waterproof Rating Temperature Range Contact Resistance Insulation Resistance Durability Breakdown Voltage 5A per pin (2 & 4 pins avialable; 6 pins upon request) Terminal: Copper Alloy, Gold over Nickel Plated Housing: Thermoplastic, UL94V-0 Rated Seal&Gasket: Silicone IP68, 1M depth of water in 24 hours -40 C ~105 C 20mΩ 1000MΩ at 500Vdc 30 cycles 1500Vac More to know UL1977 / cul / CSA C Amphenol LTW Technology Co., Ltd.
13 SSL Connector I Ordering Information I SSL 1.2 Ordering Information SSL 1.2 Connector Series (12) SSL 1.2 IP 68 Waterproof Series Connector (Housing) Gender (J) Jack Number of Contacts 2, 4 contacts e.g. (2) = 2 Contacts Connector Type (D) SMT Board Right Angle without Post (P) Plug > For Cable (L) Cable Assemblies, Straight (F) Field Installable Wires Assembly Options (00) Applicable for PCB Mount Type > For Cable (J0) End 1: Jack, End 2: Open (P0) End 1: Plug, End 2: Open (2J) 2-Ends Jack Connector (Upon Request) (2P) 2-Ends Plug Connector (Upon Request) (JP) End 1: Jack, End 2: Plug (Upon Request) Latch Option (0) None Latch (M) With Latch Wire Size (00) Applicable for PCB Mount Type > For Cable (20) 20 AWG Cable / Wires Type (001), (002) Without Cable : Different Versions > For Cable ( )+( ) : Wire Type + Wire Length e.g. (A01) = UL1430 Wire + 100mm ( ): Wire Type (A) UL 1430 Wire ( ): Length From 100mm~9900mm EX. (01) = 100mm, (02) = 200mm, (03) = 300mm... *Every 100mm as per extension Note Design and specification are subject to change without notice. Innovation in Waterproof Solution 9-12
14 SSL Connector I Physical Dimension I SSL 1.2 SMT Receptacle Cable Assembly Field Installable Physical Dimension SSL 1.2 SMT Receptacle >> 2P Recommended PCB Layout Unit: mm >> 2P Recommended PCB Layout Unit: mm Cable Assemblies & Field Installable L0 L L0 L H H W W Cable Assemblies & Field Installable * Various cable length available upon request. L0 L0 Gender L0 H W W W 2P Jack Plug H H 4P Jack Plug Unit: mm 9-13 Amphenol LTW Technology Co., Ltd.
15 SSL Connector I Find Our Standard Products I SSL 1.2 Board to Wire Wire to Wire Find Our Standard Products SSL 1.2 Board to Wire Excluded Jack 2P SSL12-J2D P SSL12-J4D Wire to Wire Cable Assemblies Plug Field Installable BBA SSL12-P2LP0-M20AXX* SSL12-P2FP0-M00001 SSL12-P4LP0-M20AXX* SSL12-P4FP0-M00001 *XX: Please choose the cable length from 100mm ~ 9900mm e.g. (01) = 100mm, (02) = 200mm, (03) = 300mm... *Every 100mm as per extension Cable Assemblies Excluded Cable Assemblies Field Installable BBA Excluded BBA Field Installable Jack Plug 2P SSL12-J2LJ0-020AXX* SSL12-J2FJ SSL12-P2LP0-M20AXX* SSL12-P2FP0-M P SSL12-J4LJ0-020AXX* SSL12-J4FJ SSL12-P4LP0-M20AXX* SSL12-P4FP0-M00001 Accessories > Contacts *XX: Please choose the cable length from 100mm ~ 9900mm e.g. (01) = 100mm, (02) = 200mm, (03) = 300mm... *Every 100mm as per extension Part Number BBA Packing Information BBA Packing Information Note Design and specification are subject to change without notice. Innovation in Waterproof Solution 9-14
16 SSL Connector I Specification I SSL 1.3 Specification SSL 1.3 Identifications SSL1.3 The Bridge Description Board to Board Jumper Number of Position Current Rating / Data Voltage Rating Material Temperature Range Contact Resistance Insulation Resistance 1P 5A 500Vac/dc Terminal: Copper Alloy, Gold over Nickel Plated Housing: Thermoplastic, UL94V-0 Rated -40 C ~105 C 20mΩ 1000MΩ at 500VDC Durability 10 cycles More to know Breakdown Voltage UL1977 / cul / CSA C Vac 9-15 Amphenol LTW Technology Co., Ltd.
17 SSL Connector I Ordering Information I SSL 1.3 Ordering Information SSL 1.3 Connector Series (13) SSL 1.3 The Bridge Series Connector (Housing) Gender (D) no gender Number of Contacts 1 contacts e.g. (1) = 1 Contacts SSL1.3 D 1 S Connector Type (S) Screw Mount Type Wires Assembly Options (00) Applicable for PCB Mount Type Assembly Option (0) Applicable for PCB Mount Type Wire Size (00) Applicable for PCB Mount Type Note Design and specification are subject to change without notice. Innovation in Waterproof Solution 9-16
18 SSL Connector I Physical Dimension I SSL 1.3 Physical Dimension SSL 1.3 SMT Receptacle Recommended PCB Layout PCB SPACING Unit: mm 9-17 Amphenol LTW Technology Co., Ltd.
19 SSL Connector I Find Our Standard Products I SSL 1.3 Find Our Standard Products SSL 1.3 SSL 1.3 The Bridge Packing Information Part Number SSL13-D1S Note Design and specification are subject to change without notice. Innovation in Waterproof Solution 9-18
20 SSL Connector I Specification I SSL 2.1 Specification SSL 2.1 Identifications SSL2.1 Inverted Thru Board Description Board to Board Number of Position 2P Current Rating / Data Voltage Rating Material Temperature Range 12A 600Vac/dc Terminal: Copper Alloy, Gold over Nickel Plated Housing & Cover: Thermoplastic, UL94V-0 Rated -40 C ~105 C Contact Resistance 20m Ω Insulation Resistance 1000MΩ at 500VDC Durability 20 cycles Breakdown Voltage 2200Vac More to know UL1977 / cul / CSA C22.2 / RoHS 9-19 Amphenol LTW Technology Co., Ltd.
21 SSL Connector I Ordering Information I SSL 2.1 Ordering Information SSL 2.1 Connector Series SSL2.1 J 2 E (21) SSL 2.1 Inverted Thru Hole Connector (Housing) Gender (J) Jack Number of Contacts 2 contacts e.g. (2) = 2 Contacts Connector Type (E) SMT Inverted 180 degree type Wires Assembly Options (00) Applicable for PCB Mount Type Assembly Option (0) Applicable for PCB Mount Type Wire Size (00) Applicable for PCB Mount Type Note Design and specification are subject to change without notice. Innovation in Waterproof Solution 9-20
22 SSL Connector I Physical Dimension I SSL 2.1 SMT Receptacle Physical Dimension SSL 2.1 SMT Receptacle Recommended PCB Layout Unit: mm # #1 Recommended PCB Thickness: 1.60mm 9-21 Amphenol LTW Technology Co., Ltd.
23 SSL Connector I Find Our Standard Products I SSL 2.1 Find Our Standard Products SSL 2.1 SSL 2.1 Inverted Thru Board Packing Information Part Number SSL21-J2E Note Design and specification are subject to change without notice. Innovation in Waterproof Solution 9-22
24 SSL Connector I Specification I SSL 2.3 Specification SSL 2.3 Identifications SSL2.3 EZ-B Description Screw Base for E26/27 Bulb Current Rating / Data 3A Voltage Rating Material Temperature Range 500Vac/dc Terminal: Copper Alloy, Gold Plated, Nickel-under Plated All over Housing & Cover: Thermoplastic, UL94V-0 Rated -40 C ~105 C Contact Resistance 20mΩ Insulation Resistance 1000MΩ at 500VDC Durability 100 cycles Breakdown Voltage 2000Vac More to know UL recognized materials 9-23 Amphenol LTW Technology Co., Ltd.
25 SSL Connector I Ordering Information I SSL 2.3 Ordering Information SSL 2.3 Connector Series (23) SSL 2.3 EZ-Base Connector (Housing) Gender (D) No Gender SSL2.3 D 2 S Number of Contacts 2 contacts e.g. (2) = 2 Contacts Connector Type (S) Screw Mount Type Wires Assembly Options (00) Applicable for PCB Mount Type Assembly Option (0) Applicable for PCB Mount Type Wire Size (00) Applicable for PCB Mount Type Note Design and specification are subject to change without notice. Innovation in Waterproof Solution 9-24
26 SSL Connector I Physical Dimension I SSL 2.3 Screw Base for E26/27 Bulb Physical Dimension SSL 2.3 Screw Base Recommended PCB Layout # 1 # 1 # # Recommended PCB Thickness: 1.60mm 27.7 Unit: mm Unit: mm 9-25 Amphenol LTW Technology Co., Ltd.
27 SSL Connector I Find Our Standard Products I SSL 2.3 Find Our Standard Products SSL 2.3 SSL 2.3 EZ-B Packing Information Part Number SSL23-D2S Note Design and specification are subject to change without notice. Innovation in Waterproof Solution 9-26
28 Amphenol LTW Technology Co., Ltd. 5F-3, No.51, Sec.4, Zhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan Telephone: Fax: Kunshan Factory No. 62, DaTong Road, Development Zone, Kunshan City, JiangSu Province, China Telephone: Fax: : For further information, please contact : Sales & Marketing Department sales@ltw-tech.com Copyright 2016 by ALTW Technology Co., Ltd Printed in Taiwan R.O.C
Power-limited Circuit Cable. Features & Applications: Specification. Power-limited Circuit Cable
Power-limited Circuit Cable Power-limited Circuit Cable (UL) E489959-N CLXX XX AWG XX C CLXX: UL13 Cable Type Plenum Rated: (2P), (3P) Riser Rated: (2R), (3R) General Rated: (2), (3) Residential Rated:
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
USB 2.0-IP67 Water Resistant Connector System
Section 6 USB 2.0-IP67 Water Resistant Connector System CONEC completed its product line of bayonet locking series, IP67 rated industrial USB 2.0 connector system for harsh environments. The housing can
SPEC Pak. Sealed Power For Environmental Connections. Anderson Power Products. Marine Wind Power Lighting Transportation Pumps Ground Support
SPEC Pak Sealed Power For Environmental Connections Marine Wind Power Lighting Transportation Pumps Ground Support Machine Tool Industrial Automation Motor Solar Power Harsh Environments Anderson Power
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
Standard I/O, 15 Position
The 9157 series was specifically designed for portable equipment. AVX now offers this two-part system as a standard product. The fixed SMT socket is designed to be housed within the confined dimensional
Setting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
High Performance Process & Temperature Controllers
C22 C62 C82 C83 High Performance Process & Temperature Controllers C72 C42 R22 01. Multi Color LCD Display 02. High Accuracy 18 Bit A-D Input and 15 Bit D-A Output 03. 200 msec Sampling Rate 04. True Universal
AVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
Standard AWG: WTB
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
Memory card connectors
Memory card connectors (PCMCIA CONFORMABLE) surface mount 560H SERIES - LIGHTWEIGHT Features The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer
Poke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X
The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product
Introducing IDC SSL Connector
Introducing IDC SSL Connector The IDC SSL connector series are insulation displacement (IDC) SMT and thru-hole wire-to-board connectors designed for quick, tool-less termination of discrete wires onto
Contents. Han Hv ES / Han Hv E Technical characteristics Han Hv ES Technical characteristics Han Hv E Han 3 Hv ES
Contents S / Page Technical characteristics S............................. 04.10 Technical characteristics.............................. 04.11 3 S.............................................. 04.12 3...............................................
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
HAMBURG INDUSTRIES CO., LTD.
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-607 Revision: 1.0 Issue Date: Oct.15, 2001 HAMBURG INDUSTRIES CO., LTD. 6FL., No.12, Lane 270, Sec. 3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan
IDC Plug: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ENVIRONMENTAL MECHANICAL ELECTRICAL HOW TO ORDER 00X
AVX developed the 9159 Series of SMT connectors for co-planar PCB mating for the challenging Solid State Lighting (SSL) market. These connectors needed to be small, low in height, carry up to 5 Amps/contact
JDX Hybrid Mixed Power & Signal
Integrated Mixed Power Backshell and Signal Fire Waterproof Connector The JDX mixed power and signal connector offers the ability to integrate 2 or 3 power contacts with 6 to 8 signal contacts in one connector
COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
RWZ CONNECTOR. 1Certified LR Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors In unit connection, this RWZ connector is a hybrid type double row drawer connector with combined signal and power supply circuits, absorbs misalignment
IDC Plug: WTB Through Wire Cap/Wire Stop Cap
AVX developed the 9159 Series of SMT connectors for co-planar PCB mating for the challenging Solid State Lighting (SSL) market. These connectors needed to be small, low in height, carry up to 5 Amps/contact
Small-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
AirBorn 4321 AirBorn Drive Addison, TX United States
AirBorn Series Body Size (number of contacts) Contact Type Hardware Type JULY 2009 AirBorn has been manufacturing high reliability interconnect systems for more than 45 years with leading-edge, innovative
www.andersonpower.com - 1 - Rugged and Sealed (IP68) Plugs and Receptacles For Use with APP Powerpole Signal, Power & Ground Contacts & Housings APP s SPEC Pak Connector Series uses rugged and environmentally
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
HMI Components. Series. Raised design PCB (with adaptor) Machinery and Automation. Indicator Illuminated pushbutton
Edition 10/2016 HMI Components 41 Series Characteristics The rectangular design of the Series 41 (18 x 24 mm) makes it especially suited: Raised design PCB (with adaptor) Functions The Series 41 incorporates
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
SPEC Pak. Sealed Power For Environmental Connections
SPEC Pak Sealed Power For Environmental Connections Marine Wind Power Lighting Transportation Pumps Ground Support Machine Tool Industrial Automation Motor Solar Power Harsh Environments Rugged and Sealed
Amphenol AssembleTech. Contents. SlimSAS LP Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Technical Datasheet Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection
ENVIRONMENTAL. Operating Temperature: -40ºC to +130ºC. Wire Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded
Wire-to-Wire (WTW) connectors have been used in the industrial market for years with traditional 2-Piece (plug & socket) connector systems. These require crimp and poke wire terminations to connect discrete
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
P3-19 Series Connectors For Entertainment Lighting
Introduction P3-19 series connectors have been developed to offer the highest levels of reliability and safety. The super robust construction ensures continual and reliable operation. The rugged fully
CLOUDSPLITTER Connector System PRELIMINARY
CLOUDSPLITTER Connector System The CLOUDSPLITTER connector system is a single cable solution for powered devices that delivers Cat5e performance and up to 250 watts of power over a single cable. The 8
Multiple Density Solder Eyelet
Multiple Density Solder Eyelet FEATURES Solder lug terminals with.093" x.06" (.36mm x 1.57mm) wiring holes. Two-contact "Jones" connector is round, all others are rectangular. For use in cable-to-panel
Poke-Home: Inverted Thru Board AWG: WTB INTER CONNECT FEATURES AND BENEFITS APPLICATIONS ELECTRICAL MECHANICAL ENVIRONMENTAL
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
Amphenol. Amphenol 97 Series Standard Cylindrical Connector. MIL-5015 Style Connectors widely used for:
Amphenol 97 Series Standard Cylindrical Connector 12-022-15 MIL-5015 Style Connectors widely used for: Factory Automation, Robotics Machine Tool, Instrumentation Welding Equipment Medical Equipment Amphenol
Operating Temperature: -40ºC to +125ºC 6XX. Wire Gauge Size
AVX developed the initial SMT discrete wire IDC connector 5 years ago for 26-28AWG AVX wires. Since then, we have seen this Wire-to-Board (WTB) contact technology spread to multiple wire gauges and multiple
SINGLE POLE SOCKETS - SOLDER MOUNT
SINGLE POLE SOCKETS - SOLDER MOUNT 450 - XXXX - XX - XX - 00 Body Brass Copper* Spring Beryllium Copper (Heat Treated) Dash Body Spring RoHS -03 Gold over Nickel Gold over Nickel -04 Electro-Tin Electro-Tin
Amphenol Amphenol Taiwan Corporation Sheet 1 of 14
Amphenol Amphenol Taiwan Corporation Sheet 1 of 14 Title: Part Number: Description: USB3.0 Connector Product Specification GSB34 / GSB35 series Micro Family, Receptacle, SMT, PCB mount Revisions Control
A W - A 2A R - 24D - 1
Knob-type Selector Switch A165S/W Mounting Aperture of 16 mm Modular construction Oil-resistant IP65 models UL and cul approved. Conforms to EN60947-5-1, IEC947-5-1 Short mounting depth, less than 28.5
Amphenol AssembleTech. Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/86/94150234.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
EP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
Excellent low-cost Process & Temperature Controllers
C22 C62 C82 C83 Excellent low-cost Process & Temperature Controllers C72 C42 R22 01. High Quality LCD Display 02. High Accuracy 18 Bit A-D Input and 15 Bit D-A Output 03. The Fast Sampling Rate in 200
Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
SW 16mm. SW 15mm. SW 19mm
M B-Coding Automation Technology 7 series Screw locking acc. to DIN EN 6076--0 Degree of protection IP67 Moulded versions Degree of protection IP68 Easy assembly Excellent EMC shielding Versions with shielding
Customer P/N: UDE P/N: GDC-1U2AVN13. Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 30μ Gold LED:L-Yellow/Green; R-Green
To: Customer P/N: UDE P/N: Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 30μ Gold LED:L-Yellow/Green; R-Green Spec No. GDC0013-00 Update Date 2015/7/7 Revision C Approved Checked
Rotary Series. Specifications. Material. Soldering Process. Max Room Temperature 120 ~ 150sec 60sec. 5 ~ 10sec.
Specifications Mechanical Mechanical Life Operating Force Environmental Operating Temperature Storage Temperature : 200mΩ max. 20,000 steps : 200gf-cm max. : -25 C to +80 C : -40 C to +85 C Material Base
Amphenol RF UHF. UHF Connector Series UHF. Description. Features/Benefits. Applications
Amphenol RF 136 Connector Series Description Invented in the 1930 s by an Amphenol Engineer named E. Clark Quackenbush, coaxial connectors are general purpose units developed for use in low frequency systems
TOGGLE SWITCHES IP67 A 9 SERIES 1B AGENCY APPROVALS SPECIFICATIONS
AGENCY APPROVALS SPECIFICATIONS Sealed miniature toggle switches C IP67 File N E195524 File N E195524 In conformity with: EN 60529: 1991 IEC 529: 1989 CHARACTERISTICS Contact Rating: S (silver) - 5A with
HARTING Han-Power T Solutions
HARTING Han-Power T Solutions Fields of Application HARTING industrial connectors are suitable in a wide variety of electronic and electrical applications. Power utilities Robotics Machine tool controls
242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
Hexa Multi Module 366HMM. Introduction. Design Specifications. Key Features
Hexa Multi Module Introduction The E-Plex 366HMM is a six channel DC power distribution module capable of handling loads of up to 15A per channel or 50A total. The six channels can be utilized as either
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
(AHL) Aluminum Encased Heat Sinkable Resistor. Token Electronics Industry Co., Ltd. Version: January 13, Web:
Version: January 13, 2017 (AHL) Aluminum Encased Heat Sinkable Resistor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
EAO Product Information. Series 84
EAO Product Information Series Switches and Indicators Switches and Indicators Index Series Description Page 539 Product Assembly Page 540 Mounting Instruction Page 541 Product Range - pushbuttons for
HB01 Series Waterproof Cable-to-Cable Connector
v1.0 HB01 Series Waterproof Cable-to-Cable Connector Product Information Module Japan Aviation Electronics Industry, Ltd. Proprietary. Copyright 2016, Japan Aviation Electronics Industry, Ltd. JAE HB01
SMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
Modular Plug Connectors compliant to Cat.6 A Standard
Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of
STANDARD COAXIAL CONNECTORS. Eco 7/16 series
STANDARD COAXIAL CONNECTORS Eco 7/16 series Eco 7/16 INTRODUCTION GENERAL Standard coaxial connectors Screw on coupling Compliant to CECC and IEC standards 50 Ω APPLICATIONS Broadcast RF components (filters,
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
Model Number Structure
General-purpose Relay G2RS-(S) Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed
75 Ω Small Coaxial Connectors (SMT Low Profile)
NEW 75 Ω Small Coaxial Connectors (SMT Low Profile) H.FL75 Series 75 ø, up to 3 GHz Figure Connector mating external view 6.5 Mar..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features.
Enclosure rating. LED indicator with test button G2R-1-SNI G2R-2-SNI Unsealed Diode. LED indicator and diode with test button G2R-1-SNDI G2R-2-SNDI
General-purpose Relay CSM_GR-_-S_DS_E Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Oct.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. New Insulation Displacement
OPEN BASE STATION ARCHITECTURE INITIATIVE
OPEN BASE STATION ARCHITECTURE INITIATIVE Appendix F Specification for Slim-I/O Panel Mount Cable to Board I/O Connector Version 1.0 Issue 1-0 1 () 9 10 11 1 1 1 1 1 1 1 19 0 1 9 0 1 9 0 1 FOREWORD OBSAI
Series 10-ZSE30A(F)/10-ISE30A
Series 10-ZSEA(F)/10-ISEA RoHS 2-Color Display High-Precision Digital Pressure Switch Clean series For positive For vacuum/ compound Rated range ISEA 0.1 to 1 MPa How to Order 10 ISEA 01 N M 01 N01 C4H
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/90/102427427.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
dam Technologies, Inc. INTRODUCTION: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements.
I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
Broadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
GM2-MA-0004 RJ45 multiport 2X2 Through Hole 5G Base-T Contact Area :
To: Customer P/N: UDE P/N: Description: RJ45 multiport 2X2 Through Hole 5G Base-T Contact Area : 30μ'' Min. Gold LED:Without LED 100% RoHS material,without exemption Approved Spec No. Update Date Revision
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Size
Wire-to-Wire connectors have been used in the industrial market for years with traditional 2-Piece (plug and socket) connector systems which require crimp and poke wire terminations to connect electrical
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
GD1-MA-0005 RJ45 1X1 Tab Down Through Hole 10G Base-T
To: Customer P/N: UDE P/N: Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 50μ'' Min. Gold LED:L-Yellow/Green; R-Green 100% RoHS material,without exemption Approved Spec No. Update
CTC Series. Environmentally sealed cable-to-cable interconnects
CTC Series Environmentally sealed cable-to-cable interconnects We Connect When it matters most For more than a century, ITT Cannon has developed innovative interconnect solutions for the world s harshest
Spring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
Details on the New G2RS
New G2RS Series The G2RS Space-saving Power Plug-in Relay has a mechanical indicator and nameplate as standard features. A relay with a lockable test button is also available. Details on the New G2RS Overview
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying
Discrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
Micro Coaxial Connector. Ultrasmall Series with mating height 1.00 mm
MCC Micro Coaxial Connector Ultrasmall Series with mating height 1.00 mm IEEE802.11a b g n WiMAX Bluetooth Zigbee MIMO (Multiple input and multiple output) 1 USS RF V Plug Cable Assembly Mating height
AVX Wire-to-Wire Connectors
AVX Wire-to-Wire Connectors www.avx.com Version 13.8 Table of Contents THRU-WIRE CONNECTORS............................................................................................. 2-8 18-26 AWG 1
Rotary Series. Specifications. Material. Soldering Process. Max Room Temperature 120 ~ 150sec 60sec. 5 ~ 10sec.
MCRH2 MCRV2 MCRS2 Specifications Mechanical Mechanical Life : 200mΩ max. 20,000 steps Operating Force : 200gf-cm max. Environmental Operating Temperature : -25 C to +80 C Storage Temperature : -40 C to
RR-HR. Simplify your cable assemblies REAR RELEASE CRIMP CONNECTORS RR-HR / E11. D-Sub connectors - Stamped and Formed Contacts.
RR-HR D-Sub connectors - Stamped and Formed Contacts REAR RELEASE CRIMP CONNECTORS CHARACTERISTICS Specifications Connectors according to MIL C24308 Materials and Platings Shells Tinned steel with or without
HARTING Han GND. People Power Partnership
98 42 937 0201 HARTING Han GND People Power Partnership Han GND - Mateable Potential Equalization The new Han GND series now enables pluggable grounding systems Han GND (Han Ground) is the innovative HARTING
Small Circular Connector. JN1/JN2 Series. Dust Cap
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series Angle Plug CONNECTOR MB-0054-8 October 2009 [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug
1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
UNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY. UL File No.: E43149 CSA File No.: LR26550
UNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY K-RELAYS.0 a UL File No.: E3 CSA File No.: LR2550.0.8 00 times more reliable than similar designs Extra long life Mechanical: more than 0 8 operations Electrical
Relays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features:
RU Series Universal Relays Key features: Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator
2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
Amphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications
Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving
Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
DeviceNet Series. Cables Cordset Accessories Receptacles Receptacle Accessories Junction Blocks
Series Cables... - Cordset Accessories... - Receptacles... 6-9 Receptacle Accessories. 0- Junction Blocks... -6 L- Mencom Corporation MencomConnectors.com TEL: 770--8 Ph: 800-966- www.mencom.com Series
PRODUCT SPECIFICATION
i TM / i+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS, PLATING AND MARKINGS... 3.3 SAFETY
Amphenol RF Interconnects BNC 31 Series Bayonet Lock RF Connector System
BNC 31 Series Bayonet Lock RF Connector System Materials Body/Finish /Nickel Centre MALE Centre FEMALE Phosphor Bronze Centre Finish Gold 30µ Insulator Delron/PBT Gasket Silicone Rubber Crimp s Annealed
3M Mini D Ribbon (MDR) Connectors
M Mini D Ribbon (MDR) Connectors Boardmount Thru-Hole Right ngle Plug Shielded 0 Series S Wiper-on-wiper contact for reliable repetitive plugging S Rugged die cast metal case construction S Screw or ground