Blade Runner Tremolo Review for the Fender Stratocaster Tony McKenzie / UK (slightly modified)

Size: px

Start display at page:

Download "Blade Runner Tremolo Review for the Fender Stratocaster Tony McKenzie / UK (slightly modified)"

Maryann Donna Bennett
6 years ago
Views:

Blade Runner Tremolo Review for the Fender Stratocaster Tony McKenzie / UK (slightly modified) I recently bought a 'Blade Runner' from Super Vee, USA for a project making a Fender Strat.

1 Blade Runner Tremolo Review for the Fender Stratocaster Tony McKenzie / UK (slightly modified) I recently bought a 'Blade Runner' from Super Vee, USA for a project making a Fender Strat. The guitar body was already to go for a regular Fender Strat 6 screw vintage tremolo unit which was my original choice for this guitar. But I had read much about the Blade Runner from Super Vee (the manufacturer) and so I decided to buy one. Actually one thing that put me right off was that there was no 'gold' option available at the time and I really needed that gold to match the rest of the guitar. But fortunately, Super Vee came out with a gold Blade Runner and I was in business. This unit took a couple of weeks to get to me here in the UK - there was no UK availability, but hey, who cares. So I promptly popped over the Super Vee website and bought myself one... the cost was $ ( 150) including international shipping. When the unit arrived it was well packed. Instructions were a little 'minimal' so you should know what you are doing if you buy one.

The tremolo pushes firmly in to the tremolo block and then 'screws in' until

2 As you can see one of the features is that the tremolo can be adjusted by the small nylon insert in the base of the trem block. The tremolo pushes firmly in to the tremolo block and then 'screws in' until you are happy with it. There's no floating around of the tremolo arm here - this can be described as excellent.

As stated the tremolo arm is a modified design of the original, the thin bit being a guide in to the trem hole as

3 The Blade Runner is extremely well made of high quality materials and the front plate (where the Super Vee logo can be seen above) is joined with super grade spring steel that is not (they tell us) going to fail. As stated the tremolo arm is a modified design of the original, the thin bit being a guide in to the trem hole as well as a way of making the tremolo arm more rigid than standard designs. The whole thing comes with everything you need to fit it from scratch.

4 You will notice that the Blade Runner only uses 4 of the screws that a regular vintage tremolo from Fender uses and I thought that this might be trouble because of reduced security on the Blade Runner to the body. Although you do use less screws there is no discernable difference between the two fittings. In fact, one advantage was that the Blade Runner tremolo could be moved marginally left to right on the body, thus allowing the tremolo to be aligned better with the neck. Another feature I liked was that the height adjustment on the string saddles could be closed down very low - useful if you are doing some non-standard mods on the neck in the body. Lastly, believe it or not, the intonation was near enough spot on when I fitted this tremolo. Right from Super Vee they set a 'nearly there' approach to those settings. Examine the picture above and you can see that right from the factory the saddles had been set roughly correct. In my case they were nearly exact. Now that's service for you So what is the overall result of fitting a Blade Runner from Super Vee to your guitar? The difference is amazing. No more clunking of the trem every time you move it, and whether you have locking tuners or not, the guitar does stay in tune better than with the regular Fender vintage tremolo. And so it should. This unit is not a low cost option. It's expensive by any standards, but if you compare it against other tremolos out there then it's basically at the top in quality. That spring steel makes the tremolo feel as if it's floating on air with absolutely zero friction or indeed drag in any way. At first, it's a little hard to get to grips with - you will have never used a tremolo with a feel like this before. The tremolo arm is also a breath of fresh air. Although there are other tremolos out there for the Fender vintage tremolo, they all cost money and there are none that I have seen that are a better fit or feel than this tremolo in its block. Adjustable, too. As far as the effects of this tremolo goes in my opinion I cannot over stress just how much the sustain is improved against a regular vintage tremolo from Fender. There is really no comparison and the Fender vintage tremolo, when you do compare them side by side on two very similar guitars loses out big time. It's that sustain - and I don't just mean when the guitars are plugged in. Just plain old sustain on the unplugged guitar with the Blade Runner fitted goes on forever. The difference really is staggering. Overall Review Conclusions This thing is expensive, but if you don't mind the slight non-standard fitting and the absolutely nonstandard tremolo then I guess that this unit could be for you. On the plus side the unit when fitted is frankly extraordinary and you will know the difference immediately.

5 This is a well made USA product (actually made in the USA) and is a great improvement over older industry standard stuff. But then again at that price it should be. The information below is not from Tony McKenzie s review! Data from Thomann:

6 Differences between Blade Runner and a traditional Stratocaster tremolo block.

8 Sven Engelbrecht Kirkeløkke, medlemsnr: 331

STEINBERGER TRANSTREM (TYPE 2) TECHNICAL DOCUMENT

STEINBERGER TRANSTREM (TYPE 2) TECHNICAL DOCUMENT These instructions apply to newer style TransTrems only (non-threaded ball type or modified threaded ball type). For purposes of discussion, these TransTrems