How to Draw Cartoon Revolver

Transcription

1 How to Draw Cartoon Revolver Easy Fast Bang! Pow! Many early children's cartoons, such as the Looney Tunes, included the use of guns. Iconic characters such as Bugs Bunny, Daffy Duck, Elmer Fudd, Tom and Jerry, Yosemite Sam, Speedy Gonzales, and Wile E. Coyote, were often seen firing these weapons. More often than not, though, the result was a "bang" with no bullet - perhaps a little flag extending from the tip of the weapon. Some of the more violent scenes have been edited from television re-runs of the cartoon series. The revolver, the type of gun featured in this step-by-step drawing guide, has been in existence since the 1580's. The style still in use today was patented by Samuel Colt in By 1857, Smith and Wesson were also producing weapons based on this patent. To draw a cartoon revolver, you will need only a piece of paper and a pencil. You may also wish to acquire an eraser to correct any mistakes, and colored pencils, crayons, or markers to color your completed drawing. Each step in this simple drawing guide is accompanied by a an illustration. In each picture, lines added in the current step are highlighted in blue; lines drawn in previous steps are shown in black. You will need to erase some of your early lines, called guide lines, in order to complete the drawing. Therefore, you may wish to sketch lightly at first.

2 Step-by-step Instructions for Cartoon Revolver Begin by drawing a rectangle. Draw a curved line from the top of the rectangle, extending outside the rectangle. From this point, extend another curved line inwards. Draw two more curved lines along the bottom and corner of the rectangle. Draw two curved lines beneath the rectangle, matching up to the lines within the rectangle. Within the oval just formed, enclose an irregular shape using a curved line. This is the gun's trigger.

3 Erase the guide lines formed by the original rectangle. Extend two long, curved lines downward from the left side of the figure. Connect the lines using an additional curved line. In the center of the figure, draw a square. Draw a curved line from corner to corner on the left exterior side of the square. Draw two straight, parallel lines extending horizontally from the upper right corner of the square. Connect the lines using a short, curved line.

4 Extend two more parallel lines below the first set. Connect the lines using a short, curved line. Extend a third set of parallel lines beneath the second set. Connect the lines using a short, curved line. Draw a long, narrow rectangle extending from the right side of the figure. Draw another, slightly shorter, narrow rectangle below the first.

5 Enclose a roughly triangular shape above the gun barrel using a short, curved line. Draw a short, curved line, enclosing a shape at the top left corner of the gun. Use a long, curved line to enclose an irregular shape on the left side of the gun. Draw two small rectangles in the central portion of the gun. Draw a short, horizontal line through the center of each rectangle.

6 Draw a circle in the middle of the gun grip. Draw a curved line through the middle of the circle. Texture the gun grip using a cross hatching technique. To draw cross hatching, draw a number of parallel, diagonal lines in one direction. Then, draw parallel, diagonal lines running in the opposite direction, crossing the first lines at perpendicular angles. This forms a tic-tac-toe or checkerboard pattern. Add detail to the gun. Draw long, straight lines along the gun barrel. Shade the bottom of the barrel and the central portion of the gun using short, closely spaced lines. Color the gun. To color it in a classic style, shade the handle brown and the gun itself in various shades of grey.

7 Find more drawing instructions on