Renold Roller Chain.

Transcription

1 Renold Roller Chain

2 2 I Renold Roller Chain Renold Roller Chain The consistent performance of Renold roller chain is ensured by a programme of continuous testing and quality audits. LOAD (N) A B S-N CURVE A - RENOLD Endurance limit B - Other Brand Endurance limit RENOLD COMPETITOR BRAND Renold s unique control over pin / bush contact makes sure that wear life exceeds other brands. Little initial chain adjustment is therefore required. Renold roller chain is highly fatigue resistant, giving up to four times the life of other leading competitor chains. Breaking loads exceed the minimum requirements of the international standards. The specification of Renold roller chain has evolved from decades of design, test and application experience which delivers product reliability and consistency. We strictly control; Materials Heat Treatment Processes Fits Assembly Lubrication Packaging Elongation (%) 0.12 LOAD CYCLES 8.5 x 10 6 The combination of all the features described ensures Renold Chain out-performs other brands as shown in the S-N curve above. COMPARATIVE COMPARATIVE WEAR TEST WEAR TEST Pitch Simplex Chain 0.5 Pitch Simplex Chain Duration (Hours) 70 Various Chain Manufacturers Renold Renold Synergy Renold s end-softened pin and spin rivet help to minimise downtime. All you need is a Renold pin extractor and you can disassemble Renold roller chain in seconds; no need to grind the head of the pin, no need for lengthy downtime.

3 Renold Roller Chain I 3 Fatigue life is substantially improved by optimising fits between pin, bush and plates and controlling plate hole quality. Sprocket life is enhanced by matching the chain gearing exactly to the tooth form. Renold pioneered ball drifting to create precisely controlled holes, which combined with other Renold process technology reinforces fatigue resistance and improves wear performance. Fatigue life is further enhanced by shot peening and other pre-stressing processes. Outer plate Bearing pin Roller Inner plate Bush Inner plate Outer plate Specially formulated lubricants reduce initial wear, give corrosion protection and ensure long storage life. Renold pins are case-hardened and centreless ground producing perfectly cylindrical diameters with extremely high surface Component life is maximised by the expert use and control of heat treatment. SHOT PEENING Fatigue life is enhanced by shot peening and other pre-stressing techniques. BALL DRIFTING

4 4 I Renold Roller Chain Renold Roller Chain European (BS) Standard / ISO 606 No.4 No. 26 No. 107 No. 12 No. 11/58 No. 30 Chain Ref. Technical Details (mm) Connecting Links Renold ISO Pitch Pitch Inside Roller Plate Plate Plate Pin Pin Conn. Link Transverse ISO606 Weight No. No. No. No. No. No. Chain Ref. (inch) (mm) Width Diam. Height Width Width Diam. Length Extension Pitch Tensile No. Inner Outer Strength European (BS) Standard - Simplex (Newtons) MIN MAX MAX MAX MAX MAX MAX MAX NOM MIN A A B C D E F G H1 J K B1 05B B1 06B B1 08B B1 10B B1 12B B1 16B B1 20B B1 24B B1 28B B1 32B B1 40B NOTE: Renold chain far exceeds the ISO 606 minimum tensile strength requirement, but Renold do not consider that this figure provides a useful indicator to the key chain performance areas of wear and fatigue. kg/m

5 Renold Roller Chain I 5 Renold Roller Chain European (BS) Standard / ISO 606 No.4 No. 26 No. 107 No. 12 No. 11/58 No. 30 Chain Ref. Technical Details (mm) Connecting Links Renold ISO Pitch Pitch Inside Roller Plate Plate Plate Pin Pin Conn. Link Transverse ISO606 Weight No. No. No. No. No. No. Chain Ref. (inch) (mm) Width Diam. Height Width Width Diam. Length Extension Pitch Tensile No. Inner Outer Strength European (BS) Standard - Duplex A A B C D E F G H2 J K 05B2 05B B2 06B B2 08B B2 10B B2 12B B2 16B B2 20B B2 24B B2 28B B2 32B B2 40B European (BS) Standard - Triplex (Newtons) MIN MAX MAX MAX MAX MAX MAX MAX NOM MIN A A B C D E F G H3 J K 05B3 05B B3 06B B3 08B B3 10B B3 12B B3 16B B3 20B B3 24B B3 28B B3 32B B3 40B NOTE: Renold chain far exceeds the ISO 606 minimum tensile strength requirement, but Renold do not consider that this figure provides a useful indicator to the key chain performance areas of wear and fatigue. kg/m

6 6 I Renold Roller Chain Renold Roller Chain ANSI Standard / ISO 606 No.4 No. 26 No. 107 No. 12 No. 11/58 No. 30 Chain Ref. Technical Details (mm) Connecting Links Renold ISO Pitch Pitch Inside Roller Plate Plate Plate Pin Pin Conn. Link Transverse ISO606 Weight No. No. No. No. No. No. No. Chain Ref. (inch) (mm) Width Diam. Height Width Width Diam. Length Extension Pitch Tensile No. Inner Outer Strength ANSI Standard - Simplex (Newtons) MIN MAX MAX MAX MAX MAX MAX MAX NOM MIN A A B C D E F G H1 J K 25A A A A A A A A A A A A A A NOTE: Renold chain far exceeds the ISO 606 minimum tensile strength requirement, but Renold do not consider that this figure provides a useful indicator to the key chain performance areas of wear and fatigue. kg/m

7 Renold Roller Chain I 7 Renold Roller Chain ANSI Standard / ISO 606 No.4 No. 26 No. 107 No. 12 No. 11/58 No. 30 Chain Ref. Technical Details (mm) Connecting Links Renold ISO Pitch Pitch Inside Roller Plate Plate Plate Pin Pin Conn. Link Transverse ISO606 Weight No. No. No. No. No. No. No. Chain Ref. (inch) (mm) Width Diam. Height Width Width Diam. Length Extension Pitch Tensile No. Inner Outer Strength ANSI Standard - Duplex A A B C D E F G H2 J K 25A A A A A A A A A A A A A ANSI Standard - Triplex (Newtons) MIN MAX MAX MAX MAX MAX MAX MAX NOM MIN A A B C D E F G H3 J K 25A A A A A A A A A A A A A NOTE: Renold chain far exceeds the ISO 606 minimum tensile strength requirement, but Renold do not consider that this figure provides a useful indicator to the key chain performance areas of wear and fatigue. kg/m

8 8 I Renold Roller Chain K1 Attachments Renold / ISO 606 K1 Attachment w h g d Chain Ref. Technical Details (mm) Renold ISO Pitch Pitch Chain Ref. (inch) (mm) No. Renold Standard A A E F w h d g T U 08B1 08B B1 10B B1 12B B1 16B B1 20B ISO Standard A A E F w h d g T U B1 05B B1* 06B B1 08B B1 10B B1 12B B1 16B B1 20B B1 24B * Straight plate K1 Attachment (above) K2 Attachment (opposite)

9 Renold Roller Chain I 9 K2 Attachments Renold / ISO 606 K2 Attachment w s h g d Chain Ref. Technical Details (mm) Renold ISO Pitch Pitch Chain Ref. (inch) (mm) No. Renold Standard A A E F h d g w s T U 08B1 08B B1 10B B1 12B B1 16B B1 20B ISO Standard A A E F h d g w s T U B1 05B B1* 06B B1 08B B1 10B B1 12B B1 16B B1 20B B1 24B * Straight plate M1 Attachment (overleaf) M2 Attachment (overleaf)

10 10 I Renold Roller Chain M1/M2 Attachments Renold / ISO 606 M1 Attachment w d f e g M2 Attachment w s F d f e g A A E Chain Ref. Technical Details (mm) Renold ISO Pitch Pitch Chain Ref. (inch) (mm) No. Renold Standard - M1 Attachment A A E F w e f d g 08B1 08B B1 10B B1 12B B1 16B B1 20B ISO Standard - M1 Attachment A A E F w e f d g B1 05B B1* 06B B1 08B B1 10B B1 12B B1 16B B1 20B B1 24B ISO Standard - M2 Attachment * Straight plate A A E F e f d g w s B1 05B B1* 06B B1 08B B1 10B B1 12B B1 16B B1 20B B1 24B

11 Renold Roller Chain I 11 Extended Bearing Pins European (BS) Standard / ISO 606 Extended pin + circlip groove (type C) Unit assemblies m k j No163 Outer link No165 Connecting link - spring clip No164 Outer link No166 Connecting link - spring clip Chain Ref. Technical Details (mm) Renold ISO Pitch Pitch Pin Extension Circlip Circlip Chain track Chain Ref. (inch) (mm) Diam. Length to Groove Groove from chain No. Circlip Groove Width Diam. Centre line Extended pins with circlip groove MAX MAX MIN MIN MAX Type C A A b j k m f 08B1 08B B1 10B B1 12B B1 16B Extended pin + circlip groove (type C) Unit assemblies b No563 Outer link No565 Connecting link - spring clip No564 Outer link No566 Connecting link - spring clip Chain Ref. Technical Details (mm) Renold ISO Pitch Pitch Pin Extension Pin Chain Ref. (inch) (mm) Diam. Length Length No. ±0.01 ±0.25 MAX Straight extended pin Type D - ISO 606 A A b v h 06B1* 06B B1 08B B1 10B B1 12B B1 16B B1 20B B1 24B

12 Australia Melbourne (Victoria) Tel: + 61 (0) Fax: + 61 (0) melsmg@renold.com.au also at: Sydney, Brisbane, Adelaide, Perth, Newcastle, Wollongong, Townsville Austria Vienna Tel: + 43 (0) Fax: + 43 (0) office@renold.at also at: Budapest (Hungary), Zlin (Czech Republic) Belgium Brussels Tel: + 32 (0) Fax: + 32 (0) info@renold.be Canada Brantford (Ontario) Tel: Fax: inquiry@renoldcanada.com also at: Montreal China Shanghai Tel: Fax: sales@renold.cn France Seclin Tel: + 33 (0) Fax: + 33 (0) contact@brampton-renold.com Germany Einbeck Tel: + 49 (0) Fax: + 49 (0) info@renold.de also at: Düsseldorf Malaysia Selangor Darul Ehsan Tel: Fax: sales@renoldmalaysia.com also at: Johor Bharu, Ipoh, Penang Netherlands Amsterdam Tel: + 31 (0) Fax: + 31 (0) info@renold.nl New Zealand Auckland Tel: Fax: aksales@renold.co.nz also at: Christchurch Philippines Paranaque City Tel: Fax: Poland c/o Einbeck (Germany) Tel: Russia Moscow Tel: Fax: info@renold.ru Scandinavia Hvidovre (Copenhagen) Tel: Fax: infor@renold.com Singapore Tel: Fax: sales@renold.sg South Africa Benoni (Johannesburg) Tel: Fax: sales@renold.co.za also at: Richards Bay, Port Elizabeth, Cape Town Spain Gavá (Barcelona) Tel: Fax: spain@renold.com Switzerland Dübendorf (Zürich) Tel: + 41 (0) Fax: + 41 (0) duebendorf@renold.com also at: Crissier (Lausanne) UK Burton upon Trent Tel: + 44 (0) Fax: + 44 (0) ukchain@renold.com USA Morristown TN Tel: Fax: sales@renoldjeffrey.com For other country distributors please consult Whilst all reasonable care is taken in compiling the information contained in this brochure, no responsibility is accepted for printing errors. All information contained in this brochure is subject to change after the date of publication. Renold Power Transmission Ref: REN10/ ENG /