Carousels - Overlapping Slat

Size: px
Start display at page:

Download "Carousels - Overlapping Slat"

Transcription

1 Carousels - Overlapping Slat Introduction The overlapping slat carousel is designed to re-circulate baggage through a series of rectangular shaped slats overlapped and linked to form a continuous loop. It can be used as either an arrivals or make-up carousel. Whilst the basic design of the carousel has been standardised, it is sufficiently flexible to accommodate variations in height, length and width. This is the only type of carousel that allows changes of heights within the loop configuration. Function Arrivals Carousel Baggage is loaded airside then transferred to the baggage hall for collection. Where the carousel passes through a wall, the wall opening can be fitted with a draft curtain and automatic roller shutter security door upon request. Make-up Carousel Make-up carousels typically have a galvanised or zinc plated trim and are located in the airside section of the baggage hall. Baggage is transferred from the check-in landside area to the airside via a series of conveyors which ultimately feed the make-up carousel. Baggage re-circulates around the carousel for collection by the baggage handlers. Daifuku BCS All Rights Reserved. Version 2 Page 1 of 8

2 Features Flat conveying surface. Suited for both baggage reclaim and baggage make-up applications in a variety of flexible configurations. Best suited for many types of baggage applications. Is able to incline or decline to accommodate changes in elevations between airside and landside. Historically proven to be low maintenance. Satisfies global OH&S requirements and IATA design standards. Technical Data Precision moulded rectangular shaped slats are connected together utilising fabricated steel support carriages which form both the driving and support chain of the carousel. Each carriage contains a centrally located guide wheel and two support wheels. The support structure beneath the running surface contains two rows of continuous support wheels and a central guide track which control the path of and support the slats. The carousel is fitted with trim covering the support structure on both the inner and outer perimeter to provide a safe and aesthetically pleasing finish. The outer trim is typically 150mm deep with a setback toe kick to the floor. The standard inner infill trim is raised 150mm above the conveying surface to provide a guide for baggage and finished edge for the infill floor. Stainless steel or galvanised finishes can be provided for airside and landside applications. Mechanical Specifications Floor to Top of Slat Width of Moving Apron Overall Conveying Width Slat Pitch Track Centreline Radius Average Mass per Linear Metre Max Dynamic Load Max Static Load Speed Gear Motor Sizing Rules System Operating Hours Gear Motor Manufacturer Slat Material Support Track 310 mm (minimum) 950 mm 1012 mm mm 1200 mm 85 kg/m 100 kg/m (50 kg/bag) 150 kg/m Adjustable, 0.5 m/s Standard Load factor = 120% maximum load Duty factor = 150% 24 hrs / day, 7 days / week SEW or equivalent Polyurethane co - Polymer Fabricated 5 mm steel channel Daifuku BCS All Rights Reserved. Version 2 Page 2 of 8

3 Key Dimensions Standard Configurations O shape L shape T shape U shape Slats Slats are injection moulded to a thickness of 6mm. The material is extremely wear resistant and includes a built-in lubricant to ensure long life and low noise. The top surface of the slat has an accurately constructed profile with a pebble dashed finish. Slat Polyurethane co - Polymer 95 A shore hardness 6 mm nominal Natural Pebble imprint Fire resistant - conforms to EN20340-ISO 340 standards Daifuku BCS All Rights Reserved. Version 2 Page 3 of 8

4 Support Carriages An endless loop and conveyor surface is created by linking together the support carriages. This endless chain allows the slats to be pop riveted in place. The carriages are fabricated mild steel weldments, jig machined to the designed pitch, then fitted with a self-aligning spherical bearing. Precision machined pins (12mm diameter guide roller stud) are used to join the support carriage assemblies. The guide roller stud screws into a tapped hole in the carriage and is locked in place with an internal star lock washer. The finished support carriage is electro galvanised to provide lasting corrosion protection and is jig tested before dispatch. At the leading end, in the centre of the support under carriage, a 50mm diameter wheel assembly is positioned to guide the carriage assembly around the carousel. The guide wheels are a high-density plastic tyre moulded onto precision sealed for life ball bearing. A machined lug is positioned in the centre of the carriage assembly just behind the guide wheel to engage with the caterpillar drive chain roller drive dogs. Carriage link Fabricated mild steel 10 mm x 40 mm & 8mm MS flat Electroplated Gold passivate Drive lugs Mild steel square bar 25 mm x 25 mm Electroplated Gold passivate Link bearings Spherical bearings N/A Natural GEG12 Central guide wheel Bearings 50mm diameter nylon 6 tyre Precision sealed for life Note: All components are machined and manufactured from steel. 13 mm (wide) Natural Grey N/A Natural 6200ZZ Drive The drive mechanism is a caterpillar type which provides for a simple yet reliable and very robust design. The gear motor is shaft mounted to transfer power directly to the drive sprockets. Dual drive chains run on two sets of matched sprockets and chain guides. These are connected by centrally located precision drive dogs that transmit driving force directly to the support carriages. As the drive unit rotates and the carousel moves forward, the trailing set of drive dogs accurately lifts into place around the tail sprocket and engages the next support carriage providing for a smooth and quiet driving mechanism. Bearings are greased for life and are maintenance free. The drive maintenance consists simply of routine checks to ensure that the drive chain is correctly lubricated and tensioned. Daifuku BCS All Rights Reserved. Version 2 Page 4 of 8

5 Specifications Number of Drives Manufacturer (BCS standard) Type Mounting Power Phase Voltage Hz 1 standard (2 project specific) SEW Eurodrive or similar SA range, helical worm wheel Shaft mounted with torque arm From 1.5 kw to 3 kw (project specific) 3 phase Project specific Project specific Drive chain Drive sprockets Drive frame RC60-1 Morse chain RC60 tooth sprocket Fabricated 5 mm mild steel frame with 12 mm base plates Drive bearings Sealed for life 45 mm N/A Natural Drive dog rollers N/A Natural 5 mm nominal Electroplated Gold passivate N/A Natural UC mm Daifuku BCS All Rights Reserved. Version 2 Page 5 of 8

6 Framework The overlapping slat carousel framework is manufactured typically in 2200mm long modules of mild steel sections and pressings. Bolted to the cross bracing for structural strength are the centre guide rails and load wheel tracks. Robust screw adjustable legs are used to support and level the cross bracings. The outer line of legs provide the attachment point for a recessed toe kick plate, which also form the bottom section of the trim skirting. The centre part of the carousel frame includes mounting locations and can have infill brackets to hold centre infill cross braces supplied as additional components for the optional infill. Cross bracing Mild steel weldments Guide rail Mild steel 40 mm x 40 mm x 5 mm MS angle straights, 40 mm x 10 mm MS flat bends Support wheel track Trim support bracketry 3 mm Electroplated Gold passivate Electroplated Gold passivate Mild steel 5 mm Electroplated Gold passivate Mild steel 3 mm Electroplated Gold passivate Daifuku BCS All Rights Reserved. Version 2 Page 6 of 8

7 Panelling / Trim The overlapping slat carousel can be supplied with 2 forms of trim: For arrivals carousels, 304 stainless steel #4 brushed finish panelling. For make-up carousels, galvabond steel panelling or mild steel powder coat panelling. Powder coating in RAL standard colours is also available for airside and make-up carousel finishing. The centre of the carousel conveyor shall be provided with a panelling up stand extending vertically 150mm above the top surface of the slat. The upstand forms a guard to prevent baggage spilling into the centre of the loop and forms a finishing edge to the optional centre infill. An optional flare can be supplied to ensure that bags and parcels do not dislodge from the carousel on outer curves. Airside Panelling / Trim The airside trim is constructed from 3.0 mm galvabond mild steel or powdercoated panelling. This section of the carousel shall be fitted with trim as follows: Inner edge shall be provided with a high side, 150 mm above the slat surface and running the entire length of this section, including the curves. The outer edge of the straight and curved sections shall be provided with 150mm deep side trim located just below the underside of the slat extending down over the conveyor structure. Item Material Thickness Finish Front trim Mild steel 3 mm Galvabond / Powder Coated Rear trim / upstands Mild steel 3 mm Galvabond / Powder Coated Toe kick Mild Steel 2 mm Powder Coated black Fasteners* Steel N/A Electroplated * All fasteners are button socket head. Landside Panelling/Trim The inner edge shall be provided with a high side, 150 mm above the slat surface and running the entire length of this section, including the curves. The outer edge of the straight and curved sections shall be provided with 150mm deep side trim located just below the underside of the slat extending m down over the conveyor structure. A toe kick shall be fitted to the entire outer edge. The toe kick shall form part of the carousel trim and shall be fitted such that it is recessed behind the stainless trim from above. Powder coated mild steel is used to construct the toe kick. Butt type joins are used to join the stainless steel trim. The butt join allows for a neat, no gap finish offering passengers a professional and safe outlook when retrieving their bags. Item Material Thickness Finish Front trim 304 stainless steel 2.5 mm / 3mm (wide) No 4 brush Rear upstands 304 stainless steel 2.5 mm No 4 brush Toe kick Mild Steel 2 mm Powder Coated black Fasteners* Steel N/A Electroplated * All fasteners are button socket head. Hidden fastenings are an option. Daifuku BCS All Rights Reserved. Version 2 Page 7 of 8

8 Load Wheels and Track Located on either side of the carriage centreline are two fabricated steel tracks that support the carriages as it passes around the loop. A load wheel designed for long life and low noise is attached to either side of the support carriage. The support wheels are a high-density plastic tyre moulded onto a precision sealed for life ball bearing and are attached to the support frame by a bolt locked with a nyloc type nut. Load wheel Bearings Support wheel track 50 mm diameter nylon 6 tyre Precision sealed for life 13 mm (wide) Natural Typically grey N/A Natural Type 6200ZZ Folded mild steel 5 mm Electroplated Gold passivate Daifuku BCS All Rights Reserved. Version 2 Page 8 of 8

Mobile Weapons Storage System Specifications

Mobile Weapons Storage System Specifications Mobile Weapons Storage System Specifications Whatever your weapon storage needs, Hi-Density s customized Weapons Storage System will be designed to fit your unique specifications. We recognize that security

More information

NEWS Part. N /0 MINITEC NEWS

NEWS Part. N /0 MINITEC NEWS NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6

More information

Coburn Interior Sliding Systems. Coburn COBURN SLIDING SYSTEMS

Coburn Interior Sliding Systems. Coburn COBURN SLIDING SYSTEMS Coburn Interior Sliding Systems Coburn COBURN SLIDING SYSTEMS Interior Sliding Door Gears FOR CUPBOARDS, WARDROBES, INTERIOR SLIDING AND FOLDING DOORS A comprehensive range of top hung and bottom rolling

More information

Installation for Full Size Polaris Ranger Crew Doors

Installation for Full Size Polaris Ranger Crew Doors Installation for Full Size Polaris Ranger Crew Doors Order of Installation: Heater Doors Wiper on to Windshield Windshield Top & Back Panel Note: Most of the steps in these instructions need to be repeated

More information

Leveling Feet, Base Plates and Casters

Leveling Feet, Base Plates and Casters Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.

More information

SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION

SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK

More information

Assembly Instructions 10 X 10 Aluminum Roof Support

Assembly Instructions 10 X 10 Aluminum Roof Support Assembly Instructions 10 X 10 Aluminum Roof Support Aluminum Roof Support Bolt Package 16-5/16 X 2 ¼ SS Bolt 24-5/16 X 1 SS Bolt 40-5/16 SS Nylon Lock Nuts 16-5/16 SS Flat Washers 28-4 ½ Wood Screws 36-1

More information

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

PARTS LIST: Air Control Assembly (1632 Sander)

PARTS LIST: Air Control Assembly (1632 Sander) PARTS LIST: Air Control Assembly (1632 Sander) 1 6293482 Filter... 1 2 6293483 Solenoid Valve... 1 3 6293484 Brake Cylinder... 1 4 6293485 Multi-Hole Connector... 1 5 6293486 Air Valve... 1 6 6293487 Air

More information

Adjustable Feet Castors Accessories for Floor Elements

Adjustable Feet Castors Accessories for Floor Elements Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible

More information

Single and Double Gates Operation & Maintenance Manual

Single and Double Gates Operation & Maintenance Manual R E L I A B L E S A F E A C C E S S Single and Double Gates Operation & Maintenance Manual System Overview SAFETY GATES KEE GATE is a complete range of safety gates designed specifically to provide permanent

More information

400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS

400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS 12/11/07 PAGE 1 OF 12 400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS Thank you for purchasing our product! *Please read these instructions

More information

CRYSTEEL S. this manual must be included with the vehicle after completing the installation.

CRYSTEEL S. this manual must be included with the vehicle after completing the installation. Website: www.tbei.com E-mail: sales@tbei.com CRYSTEEL S Grain Tipper mounting and operating instructions this manual must be included with the vehicle after completing the installation. Web Site E-Mail

More information

A14F. centre-folding internal door hardware system. 40kg max panel weight. space-saving alternative bifolds. stainless steel bearings optional

A14F. centre-folding internal door hardware system. 40kg max panel weight. space-saving alternative bifolds. stainless steel bearings optional A14F centre-folding internal door hardware system 40kg max panel weight space-saving alternative bifolds stainless steel bearings optional A14F BIFOLDING HARDWARE SYSTEM A14F: BIFOLDING SYSTEM INTERNAL

More information

RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS

RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.

More information

LOWLINE SINGLE FOLD DOWN WALL BEDS

LOWLINE SINGLE FOLD DOWN WALL BEDS ASSEMBLY INSTRUCTIONS LOWLINE SINGLE FOLD DOWN WALL BEDS Tools Required For Assembly No 2 & No 4 Phillips Head Screwdrivers No 2 Slot Head Screwdriver Hammer Electric Drill (Hammer Drill for Masonry) 6.5mm

More information

SCI-FAB Product Specifications. Casework Section 1. Part 1 General

SCI-FAB Product Specifications. Casework Section 1. Part 1 General SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.

More information

LEG CURL IP-S1315 INSTALLATION INSTRUCTIONS

LEG CURL IP-S1315 INSTALLATION INSTRUCTIONS LEG CURL IP-S35 INSTALLATION INSTRUCTIONS Copyright 2009. Star Trac by Unisen, Inc. All rights reserved, including those to reproduce this book or parts thereof in any form without first obtaining written

More information

Before fitting door, check opening size and squareness of timber frame. The door is made smaller to give correct clearance within the frame.

Before fitting door, check opening size and squareness of timber frame. The door is made smaller to give correct clearance within the frame. Slideaway Single & Maximizer Door Gear INSTALLATION INSTRUCTIONS 11 This garage door has been designed to be as as easy as possible to use, service and automate when installed correctly. Please therefore

More information

RYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET

RYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding

More information

Single and Double Gates Operation & Maintenance Manual

Single and Double Gates Operation & Maintenance Manual R E L I A B L E S A F E A C C E S S Single and Double Gates Operation & Maintenance Manual 2 System Overview SAFETY GATES KEE GATE is a complete range of safety gates designed specifically to provide permanent

More information

Company profile WITH EVERY STEP WE MAKE, WE WANT TO KEEP CONTRIBUTING TO OUR GOOD REPUTATION OF A STRONG CZECH MANUFACTURER OF LOCKS AND FITTINGS

Company profile WITH EVERY STEP WE MAKE, WE WANT TO KEEP CONTRIBUTING TO OUR GOOD REPUTATION OF A STRONG CZECH MANUFACTURER OF LOCKS AND FITTINGS Furniture fittings Company profile TOKOZ a.s. is a company working in the field of security mechanisms for more than 90 years. Thanks to years of experience we have become real experts on manufacturing

More information

MATERIAL COMBINATION NUMBER 2: Corrosive environment requiring harder, wear-resistant seating faces and resistance to dezincification.

MATERIAL COMBINATION NUMBER 2: Corrosive environment requiring harder, wear-resistant seating faces and resistance to dezincification. Cast Iron Slide Gates Spec Sheet General The contractor shall furnish and install the following cast iron slide gate assemblies as listed on the Gate Schedule and detailed on the manufacturer s drawings.

More information

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC

More information

N. 15th Street, Middlesboro, KY FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS

N. 15th Street, Middlesboro, KY FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS 1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Flip Tarp Dump Body tarping system. With tarping systems

More information

FRAME. Pull Type Rigid Frame, Lift Rotate INNER HITCH

FRAME. Pull Type Rigid Frame, Lift Rotate INNER HITCH Pull Type Rigid Frame, Lift Rotate INNER HITCH The hitch length can be adjusted in 15" increments to accommodate the tractor tire options (single or dual tires) being used and attachments installed on

More information

BMW E46 Coupe 3dr MP Bolt in (BMW Race Days Only) Roll Cage (B045) Fitting Instructions

BMW E46 Coupe 3dr MP Bolt in (BMW Race Days Only) Roll Cage (B045) Fitting Instructions BMW E46 Coupe 3dr MP Bolt in (BMW Race Days Only) Roll Cage (B045) Fitting Instructions Unwrap the mounting points/ends of the roll cage and unpack the individual fitting kits. Try to leave wrapping on

More information

Dura-Lock Roof System

Dura-Lock Roof System DLR-14 Dura-Lock Roof System Assembly and Installation Instructions Read the instructions before starting the job. They explain the steps required to produce a finished product that will meet factory specifications.

More information

Feed Drawer Rebuild, for Models, 22HF, 16HF, 1600 machines

Feed Drawer Rebuild, for Models, 22HF, 16HF, 1600 machines Knowledge Base Article Type: Instructions Feed Drawer Rebuild, for Models, 22HF, 16HF, 1600 machines Description: Instructions on How to properly remove and rebuild a Feed Drawer. WARNING Never work on,

More information

Vertical Offset Base and Safety Rail System Installation Instructions

Vertical Offset Base and Safety Rail System Installation Instructions Section 5 Vertical Offset Base and Safety Rail System Installation Instructions The vertical offset base and safety rail assembly are designed to be used in residential construction for sloped or flat

More information

Post-Paint>Fuselage>Interior>Controls>Fit rudder pedals

Post-Paint>Fuselage>Interior>Controls>Fit rudder pedals Post-Paint>Fuselage>Interior>Controls>Fit rudder pedals Objectives of this task: To fit the rudder pedals and steering links to the aircraft, and fit the rudder cable to the rudder pedals and set the deflection

More information

INSTALLATION INSTRUCTIONS RH 412 STEEL DOORS

INSTALLATION INSTRUCTIONS RH 412 STEEL DOORS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job

More information

Components made of special materials. Floor Elements for Profile St Profile KH. Fastening Elements for Profile KH

Components made of special materials. Floor Elements for Profile St Profile KH. Fastening Elements for Profile KH Profile Fastening Elements for Profile Floor Elements for Profile Profile KH Fastening Elements for Profile KH Components made of special materials Products in this section Profile 8 x eel profile that

More information

Astro-Physics Inc. 400QMD Lubrication/Maintenance Guide

Astro-Physics Inc. 400QMD Lubrication/Maintenance Guide Astro-Physics Inc. 400QMD Lubrication/Maintenance Guide The following guidelines should be followed to lubricate the three main parts of the 400QMD mount. The QMD stands for Quartz Micro-Drive controller.

More information

INSTRUCTION MANUAL AND PARTS LIST MODEL 14-10

INSTRUCTION MANUAL AND PARTS LIST MODEL 14-10 VERTICAL BAND SAWS INSTRUCTION MANUAL AND PARTS LIST MODEL 1-10 DAKE/PARMA WHEN ORDERING PARTS GIVE COMPLETE SERIAL NUMBER OF MACHINE GIVE PART NUMBER AND NAME GIVE AMOUNT REQUIRED Unless the above data

More information

Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides

Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides Application example linear systems, drives and accessories 1 2 3

More information

Sole Fitness E95 Elliptical Trainer TurnKey Delivery and Setup Training

Sole Fitness E95 Elliptical Trainer TurnKey Delivery and Setup Training Sole Fitness E95 Elliptical Trainer TurnKey Delivery and Setup Training Delivery Requirements Ground delivery Inside delivery to customer-specified location Unpack and assemble machine, and remove packing

More information

Section A December 2009

Section A December 2009 Section A ELEVATOR December 2009 1A Index 1. 47-011053-004 Deflection Chain Gear w/bearing Complete 2. 11-051772-001 Lockwasher (12 mm) 3. 47-011130-004 Bearing Bolt 4. 47-011245-003 Lower Chain Guide

More information

aluminium profile system

aluminium profile system aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction

More information

Fig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7

Fig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7 FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track

More information

AIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS

AIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS AIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS GENERAL INFORMATION...1 Freight Damage... 1 Repairing Paint Scratches...1 BASE CABINETS... 2 Drawer Removal and Reinstallation...2 Replacing Drawer

More information

N35 ALUMINIUM ROLL-UP DOOR INSTALLATION MANUAL

N35 ALUMINIUM ROLL-UP DOOR INSTALLATION MANUAL N35 ALUMINIUM ROLL-UP DOOR INSTALLATION MANUAL DOVER ROLLER SHUTTERS 295 COMMERCE WAY P.O. BOX 420 UPPER SANDUSKY, OH 43351 Dover Roller Shutters wants to THANK YOU for your purchase of the N35 Aluminum

More information

Installation Instructions Kit, Base Rail Bracket Part # 31413

Installation Instructions Kit, Base Rail Bracket Part # 31413 Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating and

More information

PARTS LIST CHARGER 2716 DB

PARTS LIST CHARGER 2716 DB PARTS LIST CHARGER 2716 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495381 LEFT OUTER BEARING / PIVOT MOUNT 1 102 9121450 5/16-18 HEX NUT WITH NY-LOK INSERT - PACK OF 5 4 103 9121210 1/4-20 X 5/8 HEX BOLT

More information

UP4 LEARN-A-LOT (PLAYFUL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR

More information

DUTCH GABLE FREESTANDING CARPORT

DUTCH GABLE FREESTANDING CARPORT DUTCH GABLE FREESTANDING CARPORT STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. Your complete guide to building a FREESTANDING Outback DUTCH GABLE CARPORT BEFORE YOU START Carefully read these instructions. If

More information

System 3000 specifications

System 3000 specifications System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be

More information

E N G L I S H GARDEN SHED. Assembly Instructions. Suitable for Models WITH VARYING DEPTHS

E N G L I S H GARDEN SHED. Assembly Instructions. Suitable for Models WITH VARYING DEPTHS GARDEN SHED Assembly Instructions Suitable for Models 6' Wide 8' Wide 0' Wide WITH VARYING DEPTHS GI0003 November 0 INSTALLATION ADVICE It's Not That Difficult! The construction of your shed isn't as complicated

More information

SLIDING GATES BRUNDLE

SLIDING GATES BRUNDLE SLIDING GATES BRUNDLE 32 BRUNDLE TOOTHED GATE RACK & ACCESSORIES TO BE WELDED TO GATE. GALVANISED OR SELF COLOUR IN ROLLED STEEL FOR GATES UP TO 1800KG Rack 22 x 22 H Art L H T L T Self Colour Self Colour

More information

M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information

M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4

More information

Assembly Instructions 10 X 10 Aluminum Frame Building

Assembly Instructions 10 X 10 Aluminum Frame Building Assembly Instructions 10 X 10 Aluminum Frame Building 27 97 9 8 47 36 74 52 10 10 X 10 Square Building W/ Dome Includes: The Steel Entry Door with a Dead Bolt Lock assembly and Aluminum Door Frame. Metal

More information

Organisational Kitchen Fittings Kitchen Cabinet Accessories

Organisational Kitchen Fittings Kitchen Cabinet Accessories Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic

More information

Optimast Installation Method Statement. F108.

Optimast Installation Method Statement. F108. Optimast Installation Method Statement. F108. Contents Page 1) Product Description. 2) Durability....... 3) Profile & Baseplate..... 4) Anchor Cradle and Foundation Stud Set Detail Drawings 4a) 127...

More information

Brother Industries, Ltd. Nagoya, Japan

Brother Industries, Ltd. Nagoya, Japan 4. 2001. This service manual has been compiled for explaining repair procedures of the MODEL XL-6562, XL6452, XR- 46. This was produced based on up-to-date product specifications at the time of issue,

More information

UP43 LEARN-A-L0T (NATURAL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR

More information

CIRRUS AIRPLANE MAINTENANCE MANUAL

CIRRUS AIRPLANE MAINTENANCE MANUAL FASTENER AND HARDWARE GENERAL REQUIREMENTS 1. DESCRIPTION This section contains general requirements for common hardware installation. Covered are selection and installation of cotter pins, installation

More information

Swerve Rack CUSTOM RACKS AVAILABLE

Swerve Rack CUSTOM RACKS AVAILABLE CUSTOM RACKS AVAILABLE Swerve Rack The design of the Swerve mirrors the bike frame, thus providing superior bike support while making it easy to secure both the bike frame and wheel with a standard u-lock.

More information

ABM International, Inc. Navigator Assembly Manual

ABM International, Inc. Navigator Assembly Manual ABM International, Inc. 1 1.0: Parts List Tablet (Qty. 1) Tablet mount (Qty. 1) NOTE: Mount may appear and operate different then image below Control Box (Qty. 1) Motor Power Supply (Qty. 1) 2 X-axis motor

More information

Material Packing Brown Grey Pine Black White

Material Packing Brown Grey Pine Black White RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24

More information

Before use please read & understand this manual, paying particular attention to the safety instructions.

Before use please read & understand this manual, paying particular attention to the safety instructions. OPERATOR S MANUAL AND PARTS LIST 12 HAND PUSH ROLLER MOWER - THHMR Sales & Helpline 01793 333220 www.thehandy.co.uk Before use please read & understand this manual, paying particular attention to the safety

More information

Pocket Door Kit PD1 / PD2 Installation Instructions. Kit Contents.

Pocket Door Kit PD1 / PD2 Installation Instructions. Kit Contents. Pocket Door Kit PD1 / PD2 Installation Instructions Kit Contents. 1, Create Rough Opening In Stud Wall Construct rough opening ensuring all sides are square and level. Rough opening should be; Height =

More information

INSTRUCTIONS INSTRUCCIONES CONSIGNES

INSTRUCTIONS INSTRUCCIONES CONSIGNES AUTOMOTIVE PRODUCTS, INC. INSTRUCTIONS INSTRUCCIONES CONSIGNES APPLICATION: GMC SIERRA 1500 HDX & SPORTSMAN GRILLE GUARDS (2014 & UP) APPLICATION PART # S 57-3690, 57-3695, 40-3695, 45-3690 ITEM QUANTITY

More information

MODEL 2EA/2EB DOOR INSTALLATION INSTUCTIONS

MODEL 2EA/2EB DOOR INSTALLATION INSTUCTIONS Dover Roller Shutters wants to THANK YOU for your purchase of the 2EA/2EB Aluminum Roll-Up Door! BEFORE INSTALLATION Please carefully read the instruction manual completely. Carefully unpack the contents

More information

Planer/Moulder Head USE helpers or power lifting equipment to lift this Planer/Moulder. Otherwise, serious personal injury may occur. To mount the Planer/Moulder head, do these steps: 1. Lay two 2x4 s

More information

G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A

G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1

More information

FLIP TARP SINGLE & DOUBLE UNDERBODY TRAILERS

FLIP TARP SINGLE & DOUBLE UNDERBODY TRAILERS 1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 FLIP TARP SINGLE & DOUBLE UNDERBODY TRAILERS INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Flip Tarp Trailer system.

More information

3 BRACKET TO GUIDE ATTACHMENT. RIGHT END Figure 1. EXTENDED BRACKET (for doors taller than 8-8 ) SERIES 650. RIGHT END COTTER PIN Figure 6

3 BRACKET TO GUIDE ATTACHMENT. RIGHT END Figure 1. EXTENDED BRACKET (for doors taller than 8-8 ) SERIES 650. RIGHT END COTTER PIN Figure 6 2 DOOR ARRANGEMENT. A Lay door on a clean floor inside of building and in front of opening (see Figure 1). NOTE: Door can be damaged if laid on unclean surface. B Distribute parts bags, guides, stops and

More information

Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model:

Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model: , 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.

More information

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together

More information

Weatherfold 4s 50 & 100 Brio Australia P: W: brio.com.au

Weatherfold 4s 50 & 100 Brio Australia P: W: brio.com.au Codes INSTBWS2 REV J - MAR 2017 Weatherfold 4s 50 & 100 Brio Australia P: +61 2 87186718 W: brio.com.au E: brio.sales@allegion.com Brio UK P: +44 191 2291224 W: briouk.com E: brio.sales.uk@allegion.com

More information

Evorail Guardrail has Evolved

Evorail Guardrail has Evolved Evorail Guardrail has Evolved Introduction o About Evorail o Legislation & Hierarchy of Fall Protection o Evorail The Systems Evorail Standard Evorail Radius Evorail Collapsible Evorail Top Fixed Evorail

More information

Selection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE STEEL LINE

Selection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE STEEL LINE PLUS 30 for cable carriers Support trays page 304 PLUS Guide channels page 305 RCC Rail Cable Carrier page 309 ECC Emergency Cable Carrier page 30 Strain relief devices page 3 Assembly profile bars page

More information

MODEL 1703E THE CHAMBERLAIN ARM TM INSTALLATION INSTRUCTIONS To be used in conjunction with the Lift-Master Garage Door Operator Owner's Manual

MODEL 1703E THE CHAMBERLAIN ARM TM INSTALLATION INSTRUCTIONS To be used in conjunction with the Lift-Master Garage Door Operator Owner's Manual MODEL 1703E THE CHAMBERLAIN ARM TM INSTALLATION INSTRUCTIONS To be used in conjunction with the Lift-Master Garage Operator Owner's Before you begin, please read this ENTIRE instruction manual. One- Piece

More information

SECTION 9: PARTS G0513/G0513P/G0513ANV

SECTION 9: PARTS G0513/G0513P/G0513ANV SECTION 9: PARTS G0513/G0513P/G0513ANV Main 21 22 23 82-6 82-5 48 22 19 20 24 18 17 24 17 26 21 55 17 16 14 15 32 33 34 20 18 27 25 50 13 47 18 82-1 175 35 55A 49 9 11-1 10 46 45 11 12 44 176 39 38 37

More information

LS2-B891 LT2-B892 LS2-B891-05, LT2-B892-05

LS2-B891 LT2-B892 LS2-B891-05, LT2-B892-05 LS2-B891 LT2-B892 Single Needle Unison Feed Lock Stitcher Single Needle Unison Feed Lock Stitcher with Thread Trimmer Twin Needle Unison Feed Lock Stitcher Twin Needle Unison Feed Lock Stitcher with Thread

More information

Street Design. MALL seating. Mall bench product details. Mall technical specification. Mall accessories. Mall material finishes

Street Design. MALL seating. Mall bench product details. Mall technical specification. Mall accessories. Mall material finishes Street Design established in 1986 UK street furniture designers & manufacturers, Leicestershire LE12 8LD Contact us MALL seating As UK based, designers and manufacturers, Street Design can manufacture

More information

How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced)

How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) 1. Press and hold the set button (top left corner) until the display shows Fun

More information

Click Here to Go Back

Click Here to Go Back Click Here to Go Back Fig. -94 Fig. -97 CC42D 10. Remove the cap screw securing the gear shift stopper plate pin retainer; then remove the retainer. Fig. -95 CC45D 12. Remove the link arm and account for

More information

Oxford Stalls Installation Instructions

Oxford Stalls Installation Instructions Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or

More information

Rolling Curtain door Manual

Rolling Curtain door Manual Rolling Curtain door Manual Installation Maintenance parts Model 944 PHONE 800 448 8979 FAX 800 236 8722 website www.tracrite.com EMAIL tr@tracrite.com ADDRESS 216 Wilburn Road Sun Prairie, WI 53590 This

More information

Downtown Rack. Custom logo option available

Downtown Rack. Custom logo option available Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier

More information

PARTS LIST. Clarke CL500M 6 spd. Metal Lathe Part Number: HT HT HT

PARTS LIST. Clarke CL500M 6 spd. Metal Lathe Part Number: HT HT HT PARTS LIST Clarke CL500M 6 spd. Metal Lathe Part Number: - 7610300 Quantity Description Part Number 1 Countersunk Hd, screw m5x14 HT3000101 1 Retaining Ring, 28 HT3000102 1 Bevel Gear HT3000103 1 Washer

More information

Spiral Slide

Spiral Slide IMPORTANT Page 1 PLEASE READ THESE INSTRUCTIONS BEFORE COMMENCING ASSEMBLY. All equipment must be installed in accordance with these instructions. Check your shipment against Bill of Lading and Parts list.

More information

OPERATIONAL MANUAL V1.0. Removing/Replacing Blades

OPERATIONAL MANUAL V1.0. Removing/Replacing Blades OPERATIONAL MANUAL V1.0 BLUEROCK WS-212 Wire Stripper Removing/Replacing Blades CAUTION!! IMPORTANT!! DANGER!! WARNING!! DISCONNECT MACHINE FROM POWER BEFORE PROCEEDING!! Estimated Completion Time: 90

More information

Hours / 100 Marks Seat No.

Hours / 100 Marks Seat No. 17610 15116 4 Hours / 100 Seat No. Instructions (1) All Questions are Compulsory. (2) Answer each next main Question on a new page. (3) Illustrate your answers with neat sketches wherever necessary. (4)

More information

PRINT MAY BE REDUCED - DO NOT SCALE. No Compression Load on Ceiling Possible Lateral Load of 8kg 2 Fixed Pins in Shear with Ceiling

PRINT MAY BE REDUCED - DO NOT SCALE. No Compression Load on Ceiling Possible Lateral Load of 8kg 2 Fixed Pins in Shear with Ceiling Date 05/207 By No Compression Load on Ceiling Possible Lateral Load of 8kg 2 Fixed Pins in Shear with Ceiling Technical Information: 2x Bugle Screw Guide Fixing Optional Non-penetrating Fixingss to Ground

More information

Mark out the centre lines of the cross plates on the side plates and drill small holes for panel pins, 3 or 4 should do, use a drill smaller than the

Mark out the centre lines of the cross plates on the side plates and drill small holes for panel pins, 3 or 4 should do, use a drill smaller than the Powder Bins The design is for A5, with 10mm all round to aid part removal, with a part height of approx 180mm, this gives a machine that can produce a reasonable sized part without being to large. The

More information

Toll Free: INSTALLATION MANUAL. Copyright 1996 Revision 1 November 2004

Toll Free: INSTALLATION MANUAL. Copyright 1996 Revision 1 November 2004 Toll Free: 1-800-563-4382 INSTALLATION MANUAL Copyright 1996 Revision 1 November 2004 WWW.TRUSTRAM.COM SECTION 1 - SITE PREPARATION 1.1 The Trus-T-Lift elevator requires a solid, smooth, and level mounting

More information

Linear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11

Linear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11 -0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide

More information

TECHNICAL SPECIFICATION FOR STEEL DRY CARGO CONTAINER 6'x1960mmx1920mm TYPE

TECHNICAL SPECIFICATION FOR STEEL DRY CARGO CONTAINER 6'x1960mmx1920mm TYPE TECHNICAL SPECIFICATION FOR STEEL DRY CARGO CONTAINER 6'x1960mmx1920mm TYPE 1. General 1.1 Scope This specification will cover the design, construction, materials, testing and inspection performances of

More information

HOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE

HOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE Check parts against this list before starting assembly. Refer to illustrations on pages 6 and 7 to view house parts. If any shortages are found, refer to Packing Slip for claim instructions. Item 3 5 6

More information

Operating Instructions and Parts Manual 10-inch Table Saw

Operating Instructions and Parts Manual 10-inch Table Saw Operating Instructions and Parts Manual 10-inch Table Saw Model 66 shown with optional extension table and legs, mobile base, and motor cover WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part

More information

EcoGlide Sliding Door System

EcoGlide Sliding Door System SOLUTIONS FOR TRADE EcoGlide Sliding Door System November 2017 SOLUTIONS FOR TRADE CONTENTS Page 4 Page 5 Page 6-20 2100 Series Floor Guided Sliding Door System 3100 Series Wall Guided Sliding Door System

More information

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP

More information

HD installation guide

HD installation guide JANUS INTERNATIONAL 1 866 562 2580 www.janusintl.c o m 1950 1950HD installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 1950 1950HD SHOWN A rolling

More information

19-in. Mini-Rack Cabinet, Type 1

19-in. Mini-Rack Cabinet, Type 1 Spec-00466 19-in. DP FX (763) Mini-Rack 422-2588 422-2661 Cabinet, Components and Accessories Free-Stand Networking Cabinets 19-in. Mini-Rack Cabinet, Type 1 Industry Standards NEMA Type 1 EIA 310-D /

More information

Screws. Introduction. 1. Nuts, bolts and screws used to clamp things together. Screws are used for two purposes:

Screws. Introduction. 1. Nuts, bolts and screws used to clamp things together. Screws are used for two purposes: Screws Introduction Screws are used for two purposes: 1. To clamp things together. 2. To control motion. 1. Nuts, bolts and screws used to clamp things together. Nuts, bolts and screws that are used for

More information

CURVED ROOF ASSEMBLY INSTRUCTIONS ATTACHED VERANDAH. Your supplementary guide to building an ATTACHED CURVED ROOF VERANDAH or PATIO BEFORE YOU START

CURVED ROOF ASSEMBLY INSTRUCTIONS ATTACHED VERANDAH. Your supplementary guide to building an ATTACHED CURVED ROOF VERANDAH or PATIO BEFORE YOU START ROOF ATTACHED VERANDAH ASSEMBLY INSTRUCTIONS Your supplementary guide to building an ATTACHED ROOF VERANDAH or PATIO This set of instructions should be used in conjunction with the Stratco instruction

More information

Side Winder R o u t e r L i f t.

Side Winder R o u t e r L i f t. Woodpeckers PRECISION WOODWORKING TOOLS Side Winder R o u t e r L i f t. INSTALLATION INSTRUCTIONS The wrench handle must be pointing left in order to fully insert or remove it. Lift Wrench Once fully

More information