SINCE 1953 WE HAVE BEEN PRODUCING COLD-DRAWN AND GROUND-ROUND BARS IN CARBON STEEL AND ALLOY STEEL. We are specialized in:
|
|
|
- Bethany Turner
- 5 years ago
- Views:
Transcription
1
2 SINCE 1953 WE HAVE BEEN PRODUCING COLD-DRAWN AND GROUND-ROUND BARS IN CARBON STEEL AND ALLOY STEEL We are specialized in: Big dimensions ready on stock, also in free-cutting steel Steel bars with heat treatments after cold-drawing, suitable for racks manufacturing Round-edged square-or-flat cold-drawn steel bars Cold-drawn steel special sections according to Customer s drawing Narrow tolerances, both on ground and cold-drawn steel bars Non-standard sizes Bar lengths up to 8.5 meters Cut-to-length as precise as ± 1 mm On request also: S355J2, S275JR, 16/20MnCr5, 16NiCr4, 18NiCrMo5, 11SMn30/37
![COLD-DRAWN STEEL BARS COLD-DRAWN FLATS THICKNESS S235JR (ST 37, E24, ASTM A36) COLD-DRAWN STEEL BARS (+C) [EN 10277/2] FLATS 4 x 2 mm 500 x 40 e 200 x 100 mm milled over 80 mm thickness SQUARES 3 x 3](/docs-images/94/119429026/images/3-0.jpg "mm 160 x 160 mm milled over 120 x 120 mm ROUNDS 2 mm 160 mm also peeled-reeled over 30 mm HEXAGONS 4 mm 100 mm ANGLES 10 x 10 x 2 mm 100 x 100 x 10 mm L SECTIONS 25 x 15 x 3 mm 100 x 50 x 10 mm T")
![SECTIONS 20 x 25 x 5 mm 79 x 79 x 9 mm C 45 (CK 45, XC 48, ASTM A29 GRADE 1045) COLD-DRAWN STEEL BARS (+C) [EN 10277/2] FLATS 8 x 7 mm 250 x 30 e 180 x 80 mm milled over 80 mm thickness SQUARES 5 x 5](/docs-images/94/119429026/images/3-1.jpg "mm 160 x 160 mm milled over 120 x 120 mm ROUNDS 2 mm 160 mm also peeled-reeled over 30 mm HEXAGONS 6 mm 100 mm SPLINED SHAFTS 14 x 11 mm 48 x 42 mm C 45 (CK 45, XC 48, ASTM A29 GRADE 1045) COLD-DRAWN")
3 COLD-DRAWN STEEL BARS COLD-DRAWN FLATS THICKNESS S235JR (ST 37, E24, ASTM A36) COLD-DRAWN STEEL BARS (+C) [EN 10277/2] FLATS 4 x 2 mm 500 x 40 e 200 x 100 mm milled over 80 mm thickness SQUARES 3 x 3 mm 160 x 160 mm milled over 120 x 120 mm ROUNDS 2 mm 160 mm also peeled-reeled over 30 mm HEXAGONS 4 mm 100 mm ANGLES 10 x 10 x 2 mm 100 x 100 x 10 mm L SECTIONS 25 x 15 x 3 mm 100 x 50 x 10 mm T SECTIONS 20 x 25 x 5 mm 79 x 79 x 9 mm C 45 (CK 45, XC 48, ASTM A29 GRADE 1045) COLD-DRAWN STEEL BARS (+C) [EN 10277/2] FLATS 8 x 7 mm 250 x 30 e 180 x 80 mm milled over 80 mm thickness SQUARES 5 x 5 mm 160 x 160 mm milled over 120 x 120 mm ROUNDS 2 mm 160 mm also peeled-reeled over 30 mm HEXAGONS 6 mm 100 mm SPLINED SHAFTS 14 x 11 mm 48 x 42 mm C 45 (CK 45, XC 48, ASTM A29 GRADE 1045) COLD-DRAWN STEEL BARS (+C) FOR FEATHER KEYS (DIN 6880) [EN 10277/2] FLATS 8 x 7 mm 100 x 50 mm h9 x h11 tolerance SQUARES 5 x 5 mm 60 x 60 mm h9 x h9 tolerance 39 NI CR MO 3 / 42 CR MO 4 HARDENED AND TEMPERED (+QT) COLD-DRAWN OR PEELED-REELED (+C/+SH) [EN 10233/4] ROUNDS 8 mm 100 mm 11 S MN PB 30 / 37 (FREE-CUTTING STEEL) COLD-DRAWN STEEL BARS (+C) [EN 10277/3] FLATS 50 mm thickness 100 mm thickness also milled SQUARES 20 x 20 mm 160 x 160 mm milled over 100 x 100 mm HEXAGONS 65 mm 100 mm WIDTH C 10 C C 12 C C C C C C 16 C C 18 C C 20 C C C C C C C C C C C C C C C C C C C 30 C C C C C C C C C 35 C C C C C C C C C C 40 C C C C C C C C C C C 45 C C C C C C C 50 C C C C C C C C C C C 55 C C C C C 60 C C C C C C C C C C C C 65 C C 70 C C C C C C C C C C C C 80 C C C C C C C C C C 90 C C C C C C C C C C 100 C C C C C C C C C C C C C 110 C C C 120 C C C C C C C C C C C C 130 C C 140 C C C C C 150 C C C C C C C C C C C 160 C C 180 C C C C 200 C C C C C C C C C C C C Cold-drawn S235JR Steel (+C) Cold-drawn C45 and S235JR Steel (+C) THICKNESS
![ROUNDS 2 mm 160 mm 39 NI CR MO 3 / 42 CR MO HARDENED AND TEMPERED ALLOY-STEEL BARS (+SL) [EN 10083] up to h6 tolerance on request over 160 mm ROUNDS 6 mm 160 mm on request over 160 mm COLD-DRAWN](/docs-images/94/119429026/images/4-2.jpg "FLATS FOR FEATHER KEYS (+C) (DIN 6880) 8x7-10x6-10x8-12x8-12x10-14x9-16x10-18x11-20x12-22x14-25x14-25x16-25x18-28x16 32x16-32x18-36x20-40x25-45x25-50x28-56x32-63x32-70x36-80x40-90x45-100x50")
4 COLD-DRAWN SQUARES (+C) COLD-DRAWN HEXAGONS (+C) COLD-DRAWN ROUNDS (+C) GROUND ROUNDS (+C+SL/+SH+SL) GROUND-ROUND STEEL BARS C45 (CK 45, XC48, ASTM A29 GRADE 1045) GROUND STEEL BARS (+SL) [EN 10083] ROUNDS 2 mm 160 mm 39 NI CR MO 3 / 42 CR MO HARDENED AND TEMPERED ALLOY-STEEL BARS (+SL) [EN 10083] up to h6 tolerance on request over 160 mm ROUNDS 6 mm 160 mm on request over 160 mm COLD-DRAWN FLATS FOR FEATHER KEYS (+C) (DIN 6880) 8x7-10x6-10x8-12x8-12x10-14x9-16x10-18x11-20x12-22x14-25x14-25x16-25x18-28x16 32x16-32x18-36x20-40x25-45x25-50x28-56x32-63x32-70x36-80x40-90x45-100x50 COLD-DRAWN SQUARES FOR FEATHER KEYS (+C) (DIN 6880) COLD-DRAWN STEEL BARS FOR RACKS We are able to offer steel bars with heat treatments after cold-drawing, including normalizing (+C +N) and annealing (+C +A). These treatments reduce most of the tensions coming from cold-drawing whenever it s important to maintain the straightness after the process, for example in the production of racks. COLD-DRAWN ANGLES (+C) COLD-DRAWN L SECTIONS (+C) 10x10x2-12x12x2-12x12x3-15x15x2 15x15x3-15x15x4-20x20x2-20x20x3 20x20x4-20x20x5-25x25x2-25x25x3 25x25x4-25x25x5-30x30x3-30x30x4 30x30x5-35x35x3-35x35x4-35x35x5 40x40x3-40x40x4-40x40x5-40x40x6 45x45x4-45x45x5-45x45x6-50x50x4 50x50x5-50x50x6-60x60x5-60x60x6 70x70x8-70x70x10-80x80x8-80x80x10 100x100x10 25x15x3-25x15x4-25x15x5-30x20x3 30x20x4-30x20x5-40x20x4-40x20x5 45x30x4-45x30x5-45x30x6-50x30x5 50x30x6-60x30x5-60x30x6-60x40x5 60x40x6-60x50x8-80x40x6-80x40x8 100x50x10 MILLED STEEL BARS Milling allows to obtain big dimensions and reduced surface defects for minimum quantity requests as well. Large sizes, especially in square section, are ready on stock. COLD-DRAWN T SECTIONS (+C) 20x25x5-22x30x5-25x25x3 26x35x5-30x30x4-35x35x4 38x38x5-40x40x4-45x45x5 48x48x5-48x48x6-58x58x7 79x79x9 COLD-DRAWN SPLINED SHAFTS (+C) 14x11-16x13-20x16 22x18-25x21-28x23 30x26-32x26-38x32 42x36-48x42 1 1/8 (28.52x23.65) 1 3/8 (34.87x28.14) 1 3/4 (44.37x36.25) SPECIAL-SECTION COLD-DRAWN STEEL BARS Special-section cold-drawn steel bars are manufactured according to Customer s drawing in pre-established minimum quantities (about 3000 kg). Compared to the application of standard crosssections, they offer the following advantages: saving of labour cost, machine-hours or any investment in special machinery for manufacturing, reduction of waste, easier interchangeability of items.
5 ISO 9001:2008 HEADQUARTER, FACTORY, MAIN STORAGE Via A. Colombo, Gorla Minore (VARESE) Italy - Tel COMMERCIAL BRANCH OFFICE, MATERIAL STORAGE: BOLOGNA - TORINO
SINCE 1953 WE HAVE BEEN PRODUCING COLD-DRAWN AND GROUND-ROUND BARS IN CARBON STEEL AND ALLOY STEEL. We are specialized in:
SINCE 1953 WE HAVE BEEN PRODUCING COLD-DRAWN AND GROUND-ROUND BARS IN CARBON STEEL AND ALLOY STEEL We are specialized in: Big dimensions ready on stock, also in free-cutting steel Steel bars with heat
BRASS/BRONZE GRADES STOCKED AUTOMATIC EXCEPTIONS TO THE SPECS LISTED ARE: LINE MARKING AND INSPECTION (I.E. MAG., SONIC, ETC.) MACHINABILITY RATINGS
144 BRASS/BRONZE GRADES STOCKED 144 SPECIFICATIONS BRASS ALLOY 360, FREE CUTTING, 1/2 HARD CHEMISTRY ONLY TO: ASTM-B-16 AND SAE CA - 360 SPECIFICATIONS NI-AL-BRZ (ALLOY C-630) AMS-4640, ASTM-B-150, ASME-B-150,
TRADITION OF QUALITY
TRADITION OF QUALITY www.toscelikniksic.me Chairman s Message We continue to be the global metal and steel force! Today, we, Tosyalı Holding, are proud of being a company that adds value to our country
Outokumpu high performance bar
Outokumpu high performance bar outokumpu.com/longproducts Forever stainless There is now, more than ever, a powerful need for sustainable and lasting solutions that pass the test of time and can be recycled
FOR BIS USE ONLY Doc. No. PG 28(1144) August 2008
FOR BIS USE ONLY Doc. No. PG 28(1144) August 2008 PRELIMINARY DRAFT AMENDMENT NO.2 AUGUST 2008 TO IS 13136 : 1991 ARMS AND AMMUNITION RIFLE AIR RIFLE SPRING OPERATED SPECIFICATION [ Pag12,Annex A ] Substitute
Fasteners Dowel Pins Extractable Dowels
Extractable Dowels & Ext. Dowels Dowels are solid pins, usually precision ground to narrow limits to permit accurate fitting. Precision dowels are traditionally used to hold parts together in a fixed alignment,
Mission Statement. State Steel strives to provide quality products and services at competitive
Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories
,/;/ ...- H. ~.,,\"\ ~- ~ " "',. Nickel Alloy Ie Specialty Wire. OJ ~ / /., RE D. mog &CO~ 1-BOO-53-LOOS ~~.\. '.., '\" "" ..
- w -. - a: -'~ - -.. ~,, I ''''. ~-- " ' ~ " "',. " ~~.\. '.., '\" "" H. ~.,,\"\ -\\ \; '. \\~~ ~ RE D...- I - ~- -- ---. "- I " '.1., / /.,.1 / )!)~ "'-:.. ~ -; -/' /. / i "/ i \ ~.. ~,/;/ / ~ Specialists
- sprue gate - pinpoint gate - fan gate - tunnel gate
Moulds for processing of thermosetting moulding compounds 1. Sprue and Runner Systems and Gates Sprues should have either a round cross-section or a rounded trapezoidal construction and must have well-polished
dimensional and shape tolerances HOT-ROLLED STEEL PLATES AND COILS
www.ruukki.com dimensional and shape tolerances HOT-ROLLED STEEL PLATES AND COILS Scope The dimensional and shape tolerances of steel are determined by the requirements of the materials standard or the
THE MOST IMPORTANT FACTS ABOUT SUPPORT BLOCKS
THE MOST IMPORTANT FACTS ABOUT SUPPORT BLOCKS > Material: High quality tempering steel resp. castings. > Machining: All support blocks shown, have machined base- and contact faces. The serrated elements
Chemical composition. Type 2 as per F568: C ( ); P (max 0.048); S (max 0.058); Mn (min 0.74); B (min );
BS EN 14399 HIGH STRENGTH STRUCTURAL BOLTING FOR PRE LOAD Direct comparison as an alternative to ASTM HSFG Bolts ASTM A325M Type 1, ASTM A490M Type 1 or 2 BS EN 14399-3:2005 Grade 8.8 and 10.9 Chemical
Product Guide Specification
HALFEN USA Inc. March 2012 8521 FM 1976 P.O. Box 547 Converse, TX 78109 Toll Free 800-423-9140 Fax 888-277-1695 Website www.halfenusa.com E-mail info@halfenusa.com Product Guide Specification Specifier
SLIDE SHAFT PRODUCTS. 777 Schwab Road, Suite T, Hatfield, PA Toll Free: Fax:
SLIDE SHAFT PRODUCTS Materials Materials of NB slide shafts are selected AISI 52100, 1060, and 0C (or equivalent) on the basis of hardenability, fatigue strength, wear resistance, and toughness. AISI
RONDAL. The use of slugs is extremely widespread and diverse, because they are processed in various industries, such as:
1 2 RONDAL Based on many years of experience, we provide our buyers with a wide range of high-quality stamped and sawn slugs from pure aluminium and aluminium alloys. Different dimensions and shapes with
STAINLESS STEEL PRODUCTS AND SERVICES
STAINLESS STEEL PRODUCTS AND SERVICES STAINLESS STEEL EXPERTS OVER 25 YEARS EXPERIENCE IN THE SECTOR WHERE TECHNOLOGY AND EXPERIENCE MEET 2X12 up to m Flatenning 2X6 up to m Nautic polish 10K Stockist
PROFILES AND SECTIONS
1 PROFILES AND SECTIONS 2 3 Extruded products, i.e. profiles and sections from aluminium and aluminium alloys are extruded semi-products of specific shapesand lengths. Characteristics of aluminium are
SPANNERS. An ISO 9001:2000 Certified Company
SPANNERS NVR offers wide range of Spanners, forged from high grade Chrome Vanadium Steel using the latest production methods. NVR Spanners made to DIN, ANSI and ISO Standards meets the latest requirements
DIVISION METAL.
Rotary Slitter Knives AND Accessories FOR Slitting Lines DIVISION METAL www.interknife.com ABOUT US A long tradition signifies commitment. The history of our company can be traced back to 1863. The manufacturing
SANDVIK 20C STRIP STEEL
SANDVIK 20C STRIP STEEL DATASHEET Sandvik 20C is a hardened and tempered carbon steel characterized by good properties in respect of: Fatigue strength and wear resistance Hardness combined with ductility
000304A A B C D 800 Top E 1000 Pag. 00/05
Measuring tools Dividers Protractors, squares Rules, scribers Screw pitch gauges Feeler gauges Welding seam gauges Drawing tools Dividers with joint Din 686 With square legs, made of forged steel. Hardened
Wire and tube Drawing
Wire and tube Drawing Drawing is an operation in which the cross-section of solid rod, wire or tubing is reduced or changed in shape by pulling it through a die. The principle of this procedure consist
Drawing. Fig. 1 Drawing
Drawing Drawing is a metalworking process which uses tensile forces to stretch metal. It is broken up into two types: sheet metal drawing and wire, bar, and tube drawing. The specific definition for sheet
HAND TOOLS. Moore & Wright Engineers Squares. For more information visit Features. WORKSHOP SQUARES: Grade B DIMENSIONS TABLE (MM)
Moore & Wright Engineers Squares Precision ground blade and stock Blind rivetted construction Hardened and tempered blades 3" & 4" available in Retail Packs 4006 WORKSHOP SQUARES: Grade B Blade Length
HAND TOOLS. Carpenters Square. Basic Combination Set 520 Series
Carpenters Square Steel base and ergonomic design for ease of use Allows positive location and clamping Offers fixed angles: 45, 90 With mini carbide scriber and level vial Squareness within 0.2mm / 300mm
Concrete drills 2.0. SDS-plus hammer drills Applications: for drilling in granite, concrete, clinker, stone, masonry, tiles and marble.
» CONCRETE DRILLS Concrete drills SDS-plus haer drills Applications: for drilling in granite, concrete, clinker, stone, masonry, tiles and marble. SDS-plus haer drills with 4 cutters Applications: for
CONTENTS. How we can help you gain a competitive advantage
UK & Global manufacture SAVING CUSTOMERS MONEY FOR OVER 50 YEARS Your Engineering Partner for Precision Machined Parts and Geared Components ISO 9001 & AS9100 Registered. Committed to Value, Quality &
FÜR LÄNGSTEILANLAGEN FOR SLITTING LINES
ROTARy ROLLSCHERENMESSER SLITTER KNIvES UND AND ZUBEHÖR ACCESSORIES FÜR LÄNGSTEILANLAGEN FOR SLITTING LINES DIvISION METAL ABOUT US A long tradition signifies commitment. The history of our company can
GQ55D Rebar Cutter Machine is suitable for building engineering, steel mills, standard components factory and forging factory
GQ55D Rebar Cutter Machine is suitable for building engineering, steel mills, standard components factory and forging factory 1. The main structure is made by high strength nodular iron casting casted
MB Commercial High Carbon Spring Wire
MB Commercial High Carbon Spring Wire Quench & Tempered M.B Class I and Class II Spring Wire - Round Quench & Tempered Cold Rolling Quality (CRQ) MB grade wire is used extensively in applications where
METRIC / IMPERIAL MINI-MAG LEVEL
Digital Mini-Mag Level 570 Series Measuring range 360 (4 x 90 ) Embedded magnets on three sides Resolution 0.05 Accuracy +/- 0.2 Standard 9V battery Dimensions: L60mm x H60mm x W35mm METRIC / IMPERIAL
ROENTGEN Over 100 years experience in quality improvement you can t beat it!
Catalog 2015/2016 ROENTGEN Over 100 years experience in quality improvement you can t beat it! WWW.ROENTGEN-SAW.COM CONTENTS THE COMPANY OVER 100 YEARS EXPERIENCE 04 TECHNIQUE TOOTH PITCHES 06 SET PATTERNS
Hot-rolled strip products Price extras in Pounds Sterling
Hot-rolled strip products Price extras in Pounds Sterling General This document shows price extras only. The invoiced price comprises these extras plus basis price, distribution and tax. Material is charged
Quality Precision Individuality
Quality Precision Individuality R SPANN-ELEMENTE 2 Technical Overview Note: All dimensions in mm, though inch sizes are produced daily. Wall thickness mm 13 12 11 1 9 8 7 6 5 Size range: Key: Regular
WASHERS CATALOG 28,000 SIZES 2,000 MATERIALS ENDLESS POSSIBILITIES
M E T R I C E D I T I O N WASHERS 2014 CATALOG 28,000 SIZES 2,000 MATERIALS ENDLESS POSSIBILITIES Washers, Spacers and Shims Made to Order Choose from a wide variety of sizes and materials with no tooling
HAND TOOLS. PILANA TOOLS s.r.o.
HAND TOOLS PILANA TOOLS s.r.o. HISTORY & PRESENT TIME HISTORY The tool production in Hulin began in 1934. The firm was founded by Mr. Studeník who named the new company First Moravian factory for saws
Oil tempered SiCrV-alloyed high tensile valve spring wire
OTEVA 75 SC, OTEVA 75 SC 1/5 PLUS Oil tempered SiCrV-alloyed high tensile valve spring wire OTEVA 75 SC is a Super Clean steel, especially intended for the manufacture of clutch/ transmission springs with
Bühler Dies and Roller Shells High-precision Parts for all Types of Pellet Mills.
Bühler Dies and Roller Shells High-precision Parts for all Types of Pellet Mills. Bühler dies and roller shells. Increasing lifetime and profits. Bühler specializes in the manufacture of high-precision
INSPECTION REPORT N o
Page: 1/11 PROJECT: TPI for Stud, bolt, nut and washer Ref: INS/SH-16/0074 BV Client: Simgetek Manufacturing and Engineering Co. Lnc Supplier: Jiaxing Haina Fastener Co., Ltd P/o nr: N/A (client to BV)
SANDVIK 14AP FREE-CUTTING WIRE WIRE
SANDVIK 14AP FREE-CUTTING WIRE WIRE DATASHEET Sandvik 14AP is a hardenable free-cutting carbon steel characterized by excellent machinability and good wear resistance and hardness after hardening. CHEMICAL
A leading supplier & manufacturer of precision engineered components
A leading supplier & manufacturer of precision engineered components T: +44 (0) 1536 461140 F: +44 (0) 1536 461662 E: sales@technifast.co.uk W: www.technifast.co.uk T: +44 (0) 1536 461140 F: +44 (0) 1536
BARE WIRES. Material: unalloyed, low-carbon steel according to PN-EN ; PN-EN 10025; ASTM A 510 M standards. Hard wires.
WIRES BARE WIRES Material: unalloyed, low-carbon steel according to PN-EN 10016-2; PN-EN 10025; ASTM A 510 M standards Hard wires SURFACE OF WIRE: 0,40 14,00 mm min. 550 MPa 40 1200 kg, pick-up, spools
Erstantie 2, FIN Villähde Tel , Fax
www.anstar.eu 2 www.anstar.eu 3 CONTENTS Page 1 PRODUCT DESCRIPTION...4 2 MATERIALS AND STRUCTURE...4 2.1 PRODUCT RANGE...4 2.2 MATERIALS...4 2.3 MANUFACTURING...4 2.4 MANUFACTURING TOLERANCES...4 2.5
New type of broaching system
New type of broaching system The construction of mechanical parts, even simple ones, sometimes involves difficult problems that require, for their resolution, lengthy times or the use of special machines.
C10 - Cold rolled steels for conventional enamelling
C10 - Cold rolled steels for conventional enamelling Enamelled steel is eminently suitable for use in the sanitary ware industry, which has very rigorous requirements with regard to hygiene and bacteriological
Tolerances for Cold-Rolled Wide Stainless Steel Strip EN 10259
Stainless Steel Advisory Service Tel: 0114 267 1265 Fax 0114 266 1252 A service provided by the SSAS Information Sheet No.2.51 British Stainless Steel Association Page 1 of 5 Tolerances for Cold-Rolled
Pipe wrenches Tube cutters Bench yoke vices. Three stands Other plumbing tools Sets of pipe wrenches. Ergonomic shape
Plumbing tools Pipe wrenches Tube cutters Bench yoke vices Three stands Other plumbing tools Sets of pipe wrenches Numerous additional parts The range of pipe wrenches is complemented by other tools dedicated
STAINLESS STEEL WIRE. Global Leader! , Hangangno-3ga, Yongsan-gu, Seoul, Korea Tel Fax
STAINLESS STEEL WIRE Global Leader! 40-134, Hangangno-3ga, Yongsan-gu, Seoul, Korea Tel. 82-2-3406-0046 Fax. 82-2-749-4984 www.koswire.com 04 05 Quality & Service We have the most qualified products and
Appliances. Barbecue Grills. Plumbingware. Architectural
ENAMELING STEEL S Appliances Barbecue Grills Plumbingware Architectural AK Steel manufactures three enameled products to meet a variety of porcelain enameling and formability requirements: UNIVIT, VIT-PLUS,
Contents DIN 50125:
14 Contents Foreword... 3 1 Scope... 4 2 Normative references... 4 3 Terms and definitions... 4 4 Types, dimensions, and designation... 4 4.1 General... 4 4.2 Type A test pieces... 6 4.3 Type B test pieces...
INNOVATION IN SPRING TECHNOLOGY.
INNOVATION IN SPRING TECHNOLOGY www.gutekunst-formfedern.de THE HOME OF STATE-OF-THE-ART SPRING TECHNOLOGY Gutekunst Formfedern GmbH, Siemensstraße 11, D-72285 Pfalzgrafenweiler Founded in 1990 Managing
LESJÖFORS FLAT SPRINGS. The Lesjöfors Group also includes.
LESJÖFORS FLAT SPRINGS The Lesjöfors Group also includes 1 2 LESJÖFORS As an industry leader in the design and manufacture of custom engineered mechanical springs and spring assemblies, Lesjöfors has the
PIERCING PUNCHES. DREI-S-Piercing Punches DIN 9861 ISO 8020 DIN 9844 DIN 9840 DIN for punching/cutting PRECISION STANDARD PARTS
DREI-S-Piercing Punches DIN 9861 ISO 8020 DIN 9844 DIN 9840 DIN 9846 for punching/cutting PIERCING PUNCHES PRECISION STANDARD PARTS PIERCING PUNCHES Piercing punches are used for punching/cutting holes
Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1
![Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1](/thumbs/78/77316211.jpg "Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1")
Designation: A 563M 04 METRIC Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1 This standard is issued under the fixed designation A 563M; the number immediately following the designation
Hindustan Inox Ltd. Hindustan Inox Ltd. Stainless Steel Bright Bars Wires Pipes Tubes Wire Rods. Stainless Steel Wires
Hindustan Inox Ltd. Bars Wires Pipes Tubes Wire Rods Wires Hindustan Inox Ltd. Bars Wires Pipes Tubes Wire Rods Office 11/13, Raghuvanshi Mansion, Raghuvanshi Mill Compound, Senapati Bapat Marg, Lower
MISSION Our mission is to provide China manufacturing solutions that create competitive advantages for our customers.
MISSION Our mission is to provide China manufacturing solutions that create competitive advantages for our customers. Hong Kong Office Add: Flat H, 15/F Siu King Bldg, 6 On Wah St,Ngau Tau Kok,Kowloon
High Tensile Steel Black Self-Colour Hexagon Socket Cap Head Screws: Metric Thread
Datasheet RS Stock No: 529703 High Tensile Steel Black Self-Colour Hexagon Socket Cap Head Screws: Metric Thread Socket caps have a small cylindrical head with tall vertical sides giving them space-saving
Think quality. Think global
Think quality. Think global B.B. Investment Casting Manufactures : Precision Lost Wax Investment Castings (Feinguss - Micro Fusione) VISION THE COMPANY, AT A GLANCE At B.B. Investment Casting, we commit
Protokoll QMH Band 3 Supplier self information II - Range of Services- Title: L General Information about the company. KBA Supplier-no.
1. General Information about the company KBA Supplier-no. Company Postal address Delivery address Telephone Fax E-Mail Internet-Adresse: Supplier's code for KBA: 2. Technical questions 2.1 Which manufacturing
MANUFACTURER OF PRECISION MACHINED PARTS AND ASSEMBLIES.
MANUFACTURER OF PRECISION MACHINED PARTS AND ASSEMBLIES www.steuby.com John Steuby- Founder John J. Steuby Company, founded in 1962, is a family owned and operated manufacturing company, specializing
Government Recognized Export House OHSAS 18001:2007 ISO 14001:2004 PED Approved Company.
Government Recognized Export House OHSAS 800:200 ISO 400:2004 PED Approved Company. Phone : +9 22 44 (2 Lines) Fax : +9 22 289 4 Email : export@reliablepipes.com domestic@reliablepipes.com Designation:
ScienceDirect. The evaluation of form deviations during teeth manufacturing of gear rings
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 96 (214 ) 44 49 Modelling of Mechanical and Mechatronic Systems MMaMS 214 The evaluation of form deviations during teeth manufacturing
ABOUT US. Our Mission. Our Vision. Providing safety living areas to the end users who would like to be in safe environment.
ABOUT US Our Company, Dogan Mesh Wire, was founded in 1968 and we are proud to share our 45 years of experience and knowledge with our customers. Since the year of the foundation; our company gives importance
LYON INDUSTRIES. Since 1968
LYON INDUSTRIES The Shim Source Since 1968 Index Product Page No. Tool Wrap................................. 3 Slotted Shim Kits............................ 4 Stainless Steel Shim Stock..................
We offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting
We offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting bending, pressing and forming turning and milling welding - stainless,
Fretting Fatigue of Slot-dovetails in Turbo-generator Rotor
Fretting Fatigue of Slot-dovetails in Turbo-generator Rotor (From O&M Issues Discussed in Recent EPRI Meetings) H. Ito Toshiba Corporation 1-1-1, Shibaura, Minato-Ku, Tokyo, 105-8001 Japan Abstract-This
Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1
![Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1](/thumbs/75/72528177.jpg "Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1")
Designation: A 325M 00 METRIC An American National Standard Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1 This standard is issued under the fixed designation A 325M;
Aeration Moulding Machine ACE
Aeration Moulding Machine ACE 1. Functional Description 2. Test Moulding Plant GF Mettmann 3. Possibilities of Saving Energy and Cost 4. Application Spectrum 1. Functional Description Moulding Process
METAL METAL
12654 - METAL 12654-1 PART ONE: GENERAL METAL 1.1 Architectural metals shall be of the best commercial quality and their various forms shall be straight and true. There shall be no scratches, scars or
Spotting Quality. Your guide to sourcing high quality fasteners. How can we help you today?
Spotting Quality Your guide to sourcing high quality fasteners. How can we help you today? Getting what you pay for. When sourcing plow bolts, or any fastener for that matter, it is easy to choose price
Experimental Evaluation of Metal Composite Multi Bolt Radial Joint on Laminate Level, under uni Axial Tensile Loading
RESEARCH ARTICLE OPEN ACCESS Experimental Evaluation of Metal Composite Multi Bolt Radial Joint on Laminate Level, under uni Axial Tensile Loading C Sharada Prabhakar *, P Rameshbabu** *Scientist, Advanced
Ball screw spindles are roll manufactured using modern machines prior to hardening and polishing.
Functional overview Ball screw spindle Ø 16 Ball screw spindle Ø 25 Overview 2-45 2-46 2-46 Ball screw nut 2 2-47 Ball screw nut 3 2-47 Clamping blocks for nut version 3 2-48 for spindle Ø 16 2-49 for
NABTEB Past Questions and Answers - Uploaded online PAST QUESTIONS AND ANSWERS GENERAL METAL WORK (191-1) MAY/JUNE 2005
PAST QUESTIONS AND ANSWERS GENERAL METAL WORK (191-1) MAY/JUNE 2005 1a. Define Drilling Drilling is defined as the process or method of creating or originating hole in any of the engineering materials,
Hand Hacksaw Blades. Standard products / Production to order (special sizes) / Customized colours and design / Private labels
Made in Czech Republic since 1934 Hand Hacksaw Blades Standard products / Production to order (special sizes) / Customized colours and design / Private labels 8% COBALT HSS BIMETAL Hand Hacksaw Blades
Catalog 2017/2018. ROENTGEN Over 100 years experience in quality improvement you can t beat it!
Catalog 2017/2018 ROENTGEN Over 100 years experience in quality improvement you can t beat it! WWW.ROENTGEN-USA.COM CONTENTS THE COMPANY OVER 100 YEARS EXPERIENCE 04 TECHNIQUE TOOTH PITCHES 06 SET PATTERNS
Oil tempered SiCrV-alloyed high tensile valve spring wire Only manudactured in China
1/5 Oil tempered SiCrV-alloyed high tensile valve spring wire Only manudactured in China is a Super Clean steel, especially intended for the manufacture of valve springs and other springs requiring high
Wire Drawing 7.1 Introduction: stock size
Wire Drawing 7.1 Introduction: In drawing, the cross section of a long rod or wire is reduced or changed by pulling (hence the term drawing) it through a die called a draw die (Fig. 7.1). Thus, the difference
Subsidiary of ELSEWEDY ELECTRIC
WINDING WIRES Subsidiary of ELSEWEDY ELECTRIC INTRODUCTION Elsewedy Electric Elsewedy Electric has become a significant contributor to the economic growth in Egypt through its development into a well-established
Engineering drawing. Semester I/II Mechanical Engineering Department Technical University of Gdańsk. Lecture 8
Engineering drawing Semester I/II Mechanical Engineering Department Technical University of Gdańsk Lecture 8 Representing Tolerance Values Tolerance is the total amount a dimension may vary and is the
Annexure - V. Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material)
Annexure - V Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material) CONTENTS SL NO. DESCRIPTION 1.0 SCOPE 2.0 REFERENCE DOCUMENTS 3.0 MANUFACTURER'S QUALIFICATION 4.0 MATERIALS
DOWEL & TAPER PINS. made by GREMAKO.
DOWEL & TAPER PINS made by GREMAKO. INHALTSVERZEICHNIS Sonja Vollmert CEO Andreas Vollmert CEO» We create lasting connections of the highest quality. Made by GREMAKO - 100% made in Germany «THERE S RUN
Catalogue guide. MARIO PINTO SPA Strada delle Cacce Torino page 1 di 13
Catalogue guide MARIO PINTO SPA Strada delle Cacce 21-10135 Torino www.live-tooling.com www.mariopinto.it page 1 di 13 PRODUCTS MANUFACTURING PHILOSOPHY Our Live Tools are entirely developed, designed
Cold rolling process routes for production of profile wire in copper, copper based and copper coated materials
Cold rolling process routes for production of profile wire in copper, copper based and copper coated materials Enzo Stucchi Wire Rolling Technology IWCC Technical Seminar 2014 Mumbai, India 3 to 4 March
Securifor Polyester Coated Welded Mesh Panels
1 Scope This specification specifies requirements for panels made out of galvanised steel wires, welded and subsequently polyester coated for fencing. The panels are used for fencing, schools, public buildings,
International Foundry Challenge Suitable Production of thin walled Aluminum Prototype and Small Series Castings for Body in White Applications
1 2 International Foundry Challenge Suitable Production of thin walled Aluminum Prototype and Small Series Castings for Body in White Applications Joachim Gundlach, Jörg Detering Contents 3 Company Information
Salient Features: Bhn. 3 - Jaws 4 - Jaws. 6 - Jaws
SELF CENTERING CHUCK 1 Salient Features: Body: KIC Self Centering Chucks are supplied in semi steel bodies. Semi-steel alloyed body is casted with the addition of alloys like chromium, nickel, copper manganese
RR-F-191/1D 14 May SUPERCEDING RR-F-191/1C July 22, 1981 FEDERAL SPECIFICATION SHEET
14 May 1990 ----------- SUPERCEDING RR-F-191/1C July 22, 1981 FEDERAL SPECIFICATION SHEET FENCING, WIRE AND POST METAL (CHAIN-LINK FENCE FABRIC) (DETAIL SPECIFICATION) This Federal Specification is approved
Trade of Toolmaking. Module 3: Milling Unit 9: Precision Vee Block Assembly Phase 2. Published by. Trade of Toolmaking Phase 2 Module 3 Unit 9
Trade of Toolmaking Module 3: Milling Unit 9: Precision Vee Block Assembly Phase 2 Published by SOLAS 2014 Unit 9 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction... 4
Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 1
Designation: A 94 0 Standard Specification for Steel Transmission Tower olts, Zinc-Coated and are This standard is issued under the fixed designation A 94; the number immediately following the designation
METRIC FASTENERS 1520 METRIC FASTENERS
1520 METRIC FASTENERS METRIC FASTENERS A number of American National Standards covering metric bolts, screws, nuts, and washers have been established in cooperation with the Department of Defense in such
ISO 5001 INTERNATIONAL STANDARD. Cold-reduced carbon steel sheet for vitreous enamelling
INTERNATIONAL STANDARD ISO 5001 Fourth edition 2007-07-01 Cold-reduced carbon steel sheet for vitreous enamelling Tôles en acier au carbone laminées à froid pour émaillage par vitrification Reference number
Fubri supply optimum solutions with the greatest expertise all type of tools for gear cutting
Fubri supply optimum solutions with the greatest expertise all type of tools for gear cutting Company Over 50 years of experiences 25 years in gear cutting industry Since 5 years provide complete package
SCREWS MACHINE. Slotted Phillips Six-Lobe Square Recess Pozi-Alternative Combination Recess Military Commercial Metric Inch
SCREWS MACHINE Slotted Phillips Six-obe Square Recess Pozi-Alternative Combination Recess Military Commercial Metric Inch INCH COMMERCIA COMBINATION DRIVE BINDING UNDERCUT FAT HEX WASHER Green (Header
INTRODUCTION. Dear Business Partners,
INTRODUCTION Dear Business Partners, We are proud to issue the new catalogue of STROJFERR s.r.o. which was established in 1997 as a genuinely Czech company. In its activities and production programme,
Copper Tube L AIR CONDITIONING & REFRIGERATION COPPER TUBE AS/NZS 1571 ASTM B280 BSEN
Copper Tube L AIR CONDITIONING & REFRIGERATION COPPER TUBE AS/NZS 1571 ASTM B280 BSEN 12735 www.kembla.com.au Copper Tube L MM Kembla has been providing our customers with the highest quality and most
Mittal Steel Walker Wire Inc.
Mittal Steel Walker Wire Inc. Steel wire with unmatched quality and versatility, supported by an outstanding supply network and ever-increasing variety of applications. Member of Mittal Steel, the new
Parkers. Tolerances on dimensions
Aluminium and aluminium alloys - Extruded rod/bar, tube and pro les Alloy groups The division into Group I and Group II of the most commonly used general engineering alloys is specified in table 1. (Corresponding
VARVIT USA, LLC SEQUOIA DRIVE SUITE 101 AURORA,ILLINOIS USA PRODUCT CATALOG
PRODUCT CATALOG With over 50 years of manufacturing experience, The Vescovini Group is one of the major players in the European market producing high quality fasteners, screws, nuts, studs, wheel bolts
3. ISO information on technical standardisation changeover to ISO
3. ISO information on technical standardisation changeover to ISO 3.1 Code Technical standardisation is work of harmonisation in the technical field that is carried out jointly by all interested parties.
Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 1
Designation: A 94 0 e Standard Specification for Steel Transmission Tower olts, Zinc-Coated and are This standard is issued under the fixed designation A 94; the number immediately following the designation