FINISHES. By Actiu.

Transcription

1 FINISHES By Actiu

2 GROUP T T - POLYESTER NON METALLIC DYESTUFFS T88 T91 T80 T89 T81 T90 T87 T85 T84 T86 T83 T82 02

3 TECHNICAL SPECIFICATIONS GROUP T Material Weight Width Abrasion resistance Cleaning Polyester Non metallic dyestuffs lin. metre aprox. grams cm rubs - EN ISO (Martindale) Vacuum regulary. Wipe clean with damp cloth or shampoo using propietary upholstery shampoo. 100% Flammability BS EN & 2 (Cigarette & Match) - BS 7176:2007 Low Hazard BS 476 Part 7 Class 1 BS EN Adhered Class B, s1, d0 BS EN Unadhered Class B, s1, d2 Will also pass other flammability standards. Flame retardant performance is dependent upon the foam used and fireproof treatment. Subject to changes and colour diferences ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 03

4 GROUP L L - RECYCLRD POLYESTER NON METALLIC DYESTUFFS L88 L91 L84 L89 L81 L82 L86 L85 04

5 TECHNICAL SPECIFICATIONS GROUP L Material Weight Width Abrasion resistance Colour fastness to light Colour fastness to rubbing Cleaning Recycled Polyester Non metallic dyestuffs lin. metre aprox. grams cm rubs - EN ISO (Martindale) scale 1-8, max. 8 - EN ISO B02 scale 1-5, max. 5 - EN ISO 105X12 (wet/dry) Vacuum regulary. Wipe clean with damp cloth or shampoo using propietary upholstery shampoo. 100% / 4 Flammability BS EN & 2 (Cigarette & Match) - BS 7176:2007 Low Hazard BS 476 Part 7 Class 1 Will also pass other flammability standards. Flame retardant performance is dependent upon the foam used and fireproof treatment. Environment EU Ecolabel Subject to changes and colour diferences ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 05

6 GROUP C C - XTREME FLAMERETARDANT NON METALLIC DYESTUFFS C88 C81 C84 C89 C83 C82 C87 C86 06

7 TECHNICAL SPECIFICATIONS GROUP C Material Weight Width Abrasion resistance Cleaning Flammability Xtreme FlameRetardant Polyester Non metallic dyestuffs 100% lin. metre aprox. grams 435 cm 140 rubs - EN ISO (Martindale) Vacuum regulary. Wipe clean with damp cloth or shampoo using propietary upholstery shampoo. BS EN &2 (Cigarette & Match) - BS 7176:2007 Low Hazard BS 7176:2007 Medium Hazard - BS 5852, Crib 5 - DIN 4102 B1 NF-P M1 - UNI 8456 & UNI 9174 Class 1 Will also pass other flammability standards. Flame retardant performance is dependent upon the foam used and fireproof treatment. Subject to changes and colour diferences ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 07

8 STEP GROUP M 100% TREVIRA CS / FLAME RETARDANT M75 M90 M78 M71 M92 M76 M91 M12 M94 08

9 TECHNICAL SPECIFICATIONS STEP GROUP M Material Weight Width Abrasion resistance Pilling Colour fastness to light Colour fastness to rubbing Cleaning Trevira CS lin. metre aprox. grams cm rubs - EN ISO (Martindale) scale 1-5, max. 5 - EN ISO scale 1-8, max. 8 - EN ISO B02 scale 1-5, max. 5 - EN ISO 105X12 (wet/dry) Shrinkage: <5% 100% US ACT Flammability Pass Heavy Duty Upholstery BS EN &2 - BS 5852 crib 5 - FAR/JAR (a) (i) (ii) DIN 4102:B1 - NFP :M1 - BS 7176 Med.Hazard - CA TB IMO Res. A 652 (16) - UNI 9175 class 1 EMME - Calif. Tech. Bull. 117-E Önorm B 3825 B1/Q1 - BS &1 - MED Certificate IMO AM 18 - NF D Will also pass other flammability standards. Flame retardant performance is dependent upon the foam used and fireproof treatment. Subject to changes and colour diferences ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 09

10 MELANGE GROUP M 100% TREVIRA CS / FLAME RETARDANT M23 M20 M14 M15 M17 M22 M10 M24 M19 10

11 TECHNICAL SPECIFICATIONS MELANGE GROUP M Material Weight Width Abrasion resistance Pilling Colour fastness to light Colour fastness to rubbing Cleaning Trevira CS lin. metre aprox. grams cm rubs - EN ISO (Martindale) scale 1-5, max. 5 - EN ISO scale 1-8, max. 8 - EN ISO B02 scale 1-5, max. 5 - EN ISO 105X12 (wet/dry) Shrinkage: <5% 100% US ACT Flammability Pass Heavy Duty Upholstery BS EN &2 - BS 5852 crib 5 - FAR/JAR (a) (i) (ii) DIN 4102:B1 - NFP :M1 - BS 7176 Med.Hazard IMO Res. A 652 (16) - UNI 9175 class 1 EMME - Calif. Tech. Bull. 117-E Önorm B 3825 B1/Q1 - BS &1 - MED Certificate IMO AM 18 - NF D Will also pass other flammability standards. Flame retardant performance is dependent upon the foam used and fireproof treatment. Subject to changes and colour diferences ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 11

12 BLAZER GROUP B 100% VIRGIN WOOL B15 B20 B13 B21 B17 B16 B11 B10 B14 B28 B29 B12 12

13 TECHNICAL SPECIFICATIONS BLAZER GROUP B Material Weight Width Abrasion resistance Colour fastness to light Colour fastness to rubbing Cleaning US ACT Flammability Virgin Wool 100% lin. metre aprox. grams 645 cm 140 rubs - EN ISO (Martindale) scale 1-8, max. 8 - EN ISO B02 5 scale 1-5, max. 5 - EN ISO 105X12 (wet/dry) 4 Vacuum regularly. Professionally dry clean or wipe clean with a damp cloth. Pass Heavy Duty Upholstery BS EN /2 - BS 7176 Low Hazard OPTIONAL: BS 5852 when FR treated BS 7176 Medium Hazard when FR treated UNI 9174 Class 1IM Will also pass other flammability standards. Flame retardant performance is dependent upon the foam used and fireproof treatment. Environment EU Ecolabel Subject to changes and colour diferences ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 13

14 ATLANTIC GROUP F 100% POLYESTER F15 F16 F14 F21 F17 F22 F20 F10 F12 14

15 TECHNICAL SPECIFICATIONS ATLANTIC GROUP F Material Weight Width Abrasion resistance Pilling Colour fastness to light Colour fastness to rubbing Cleaning US ACT Flammability Environment Subject to changes and colour diferences Polyester lin. metre aprox. grams cm rubs - EN ISO (Martindale) scale 1-5, max. 5 - EN ISO scale 1-8, max. 8 - EN ISO B02 scale 1-5, max. 5 - EN ISO 105X12 (wet/dry) 100% Dry cleaning. Shrinkage: 3% Pass Heavy Duty Upholstery CA TB California Bulletin CAL 117-E-Class 1 ASTM E 84 ÖNORM B 3825-B Q1 UK AM 18 - NF D Class Uno UNI 9175 Class 1 I EMME NF P M3 BS EN &2 It can also be compatible with other flammability standards. The level of fire resistance is dependent on foam used and fire protection OEKO-Tex EU Ecolabel 100% Free of heavy metals ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 15

16 STEELCUT TRIO GROUP S 90% NEW WOOL 10% NYLON S13 S25 S19 S17 S23 S16 16

17 TECHNICAL SPECIFICATIONS STEELCUT TRIO GROUP S Material Weight Width Abrasion resistance Pilling Colour fastness to light Cleaning US ACT Flammability New wool - Nylon 90% - 10% lin. metre aprox. grams 770 cm 140 rubs - EN ISO (Martindale) scale 1-5, max. 5 - EN ISO scale 1-8, max. 8 - EN ISO B Vacuuming and dry cleaning Pass Heavy Duty Upholstery EN /2 BS 5852, ignition source 2-3 DIN 4102 B2 Önorm B1/ Q1 NF D Italian Class 1IM US Cal. Tech. Bull. 117, Sec. E IMO A.652(16) Retardant treatment : BS 5852 Crib 5 Environment EU Ecolabel Subject to changes and colour diferences ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 17

18 HARLEQUIN GROUP H 100% POLYESTER H18 H14 H15 H12 18

19 TECHNICAL SPECIFICATIONS HARLEQUIN GROUP H Material Weight Width Abrasion resistance Pilling Colour fastness to light Colour fastness to rubbing US ACT Cleaning Polyester lin. metre aprox. grams cm rubs - BS EN ISO (Martindale) BS EN ISO scale 1-8, max. 8 - BS EN ISO B02 scale 1-5, max. 5 - EN ISO 105X12 (wet/dry) Pass Heavy Duty Upholstery Dry cleaning Shrinkage: max 4,5% Shrinkage: max 6,0% 100% P-Cleaning Flammability BS EN &2 - BS 5852 P1-0 - Calif. Tech. Bull. 117,E Will also pass other flammability standards. Flame retardant performance is dependent upon the foam used and fireproof treatment. Subject to changes and colour diferences ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 19

20 FABRIC MESH STRING 100% POLYESTER

21 TECHNICAL SPECIFICATIONS FABRIC MESH STRING Material Weight Width Abrasion resistance Pilling Colour fastness to light Colour fastness to rubbing US ACT Cleaning Flammability Polyester lin. metre aprox. grams cm rubs - BS EN ISO (Martindale) BS EN ISO scale 1-8, max. 8 - BS EN ISO B02 scale 1-5, max. 5 - EN ISO 105X12 (wet/dry) Pass Heavy Duty Upholstery Dry cleaning Shrinkage: max 1,0% Shrinkage: max 1,5% BS EN &2 - BS &1. 100% P-Cleaning Will also pass other flammability standards. Flame retardant performance is dependent upon the foam used and fireproof treatment. Subject to changes and colour diferences ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 21

22 OMEGA 3D GROUP G 100% POLYESTER G13 G17 G20 G21 G19 G16 22

23 TECHNICAL SPECIFICATIONS OMEGA 3D GROUP G Material Weight Width Abrasion resistance Pilling Colour fastness to light Colour fastness to rubbing US ACT Cleaning Flammability Polyester 100% lin. metre aprox. grams 500 cm 160 rubs - BS EN ISO (Martindale) BS EN ISO scale 1-8, max. 8 - BS EN ISO B scale 1-5, max. 5 - EN ISO 105X12 (wet/dry) 4-5 Pass Heavy Duty Upholstery Dry cleaning P-Cleaning Shrinkage: max 2,5% Shrinkage: max 4,5% BS EN &2 - BS 5852 P1-0 - Calif. Tech. Bull. 117,E Will also pass other flammability standards. Flame retardant performance is dependent upon the foam used and fireproof treatment. Subject to changes and colour diferences ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 23

24 FABRIC MESH PLUS 64% POLYESTER 36% POLYAMIDE

25 TECHNICAL SPECIFICATIONS FABRIC MESH PLUS Material Weight Width Abrasion resistance Colour fastness to light Colour fastness to rubbing Cleaning Flammability High tenacity polyester Polyamide lin. metre aprox. grams cm rubs - EN ISO (Martindale) scale 1-8, max. 8 - EN ISO B02 scale 1-5, max. 5 - EN ISO 105X12 (wet/dry) 64% 36% Vacuum cleaning, cleaning with dry foam. BS EN :1994 Part 1 Thanks to its fabric technical properties prevent gradual deformations. Constantly adapts to any user s positions and also helps the user s back to maintain a regular temperature because of the fabric transpiration. Mesh structure is physically prepared to resist scratches or damages produced by sharp items recovering thus its initial state by extending the end product s life Subject to changes and colour diferences ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 25

26 FABRIC MESH NET 64% POLYESTER 36% POLYAMIDE Black Colour 55% Black Colour 45%

27 TECHNICAL SPECIFICATIONS FABRIC MESH NET Material Weight Width Abrasion resistance Pilling Colour fastness to light Colour fastness to rubbing Cleaning Flammability High tenacity polyester Black 55% / Colours 64% Polyamide Black 45% / Colours 36% lin. metre aprox. grams Black 390 / Colours 420 cm 155 rubs - EN ISO (Martindale) EN ISO scale 1-8, max. 8 - EN ISO B02 6 scale 1-5, max. 5 - EN ISO 105X12 (wet/dry) 4-5 Vacuum cleaning, cleaning with dry foam. EN 1021/1 Subject to changes and colour diferences ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 27

28 GROUP N 86% COATING: PVC 14% TEXTILE: CO/PES N35 N38 N37 N34 N33 N32 N31 N36 N39 N30 28

29 TECHNICAL SPECIFICATIONS GROUP N Material Coating: PVC Textile: CO/PES Weight g/m 2 - DIN Width cm Thickness mm Abrasion resistance BS 5690 (Martindale) Colour fastness to light scale 1-8, max. 8 - DIN Colour fastness to rubbing scale 1-5, max. 5 (wet/dry) - DIN Cleaning Rub gently with damp cloth or sponge. Do not use multi-purpose products Flammability EN1021 1&2 Subject to changes and colour diferences 86% 14% ,95-1, ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 29

30 GROUP P 100% FIRST QUALITY SELECTED LEATHER (COW GRAIN LEATHER) P18 P11 P10 30

31 TECHNICAL SPECIFICATIONS GROUP P Material Finish Thickness Tear resistance Bending resistance Grip Finish ph of the aqueous excerpt Colour fastness to light Colour fastness to rubbing Cleaning Flammability First quality selected leather (Cow grain leather) First quality leather semi-aniline (Chrome tanning) mm DIN DIN IUF 470 DIN DIN DIN (wet/dry) Wipe clean with neutral deterge. BS % 100% 0,8-1,1 > 20 N Min min. 1,5N/10mm > 3,5 N ºC ºC Subject to changes and colour diferences ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 31

32 GROUP J 100% FIRST QUALITY SELECTED LEATHER (COW GRAIN LEATHER) J18 J11 J10 32

33 TECHNICAL SPECIFICATIONS GROUP J Material First quality selected leather (Cow grain leather) Finish First quality leather semi-aniline (Chrome tanning) Width m 2 Thickness mm Tear resistance ISO 3377-I Bending resistance ISO 5402 Colour fastness to light ISO 105 B02 Adhesion ISO Colour fastness to rubbing Dry 500 ciclos. - ISO Wet 80 ciclos. - ISO Sweat 50 ciclos. - ISO Cleaning Wipe clean with neutral deterge. Flammability EN1021 1&2 Subject to changes and colour diferences 100% 100% 4,8-5,0 0,9-1,1 20 N > ,5 N/cm ºC ºC ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 33

34 LEATHER FACE 100% RECYCLED LEATHER FIBRES

35 TECHNICAL SPECIFICATIONS LEATHER FIBRES Material Finish Weight lin/metre Width Thickness Abrasion resistance Colour fastness to rubbing Tear resistance Finish Adhesion Cleaning Flammability Recycled Leather Fibres Poliurethane Water Solution grams cm mm rubs - EN ISO (Martindale) ISO 105X12 (wet/dry) ISO ISO Wipe clean with neutral deterge. BS EN :2006 (Cigarette) - BS EN :2006 (match) 100% 100% ,1-1, > 500 cycles (Wet) > cycles (Dry) >10n >5n Subject to changes and colour diferences ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 35

36 BEECH LACQUERED PLYWOOD 18/28 NATURAL LAQUERED BEECH 14 CHESTNUT 19 WENGUE LAQUERED OAK 00 WHITE 07 RED 26 NATURAL OAK 29 WENGUE LAQUERED OAK 36

37 LACQUERED PLYWOOD TECHNICAL SPECIFICATIONS Plywood desktop of 10 mm thickness manufactured with natural beech or oak wood and synthetic resins using high pressure and heat. The alternating arrangement of the fibres formed at right angles (perpendicular and transverse), gives the product great dimensional stability and durability, great resistance and lightness, 100% recyclable. ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 37

38 POLIURETHANE 01 GREY 08 BLACK 06 BLUE 15 PISTACHIO 07 RED 38

39 TECHNICAL SPECIFICATIONS POLIURETHANE PU (Poliurethane integral) - (TPU) Versatile material with compact surface and soft inner. It is comfortable and solid, pleasant and resistance. Elastomer to absorb impacts or constant movements. Long lasting without any maintenance. Great resistance to over weight as well as capacity to absorb impacts. Polyurethane used by Actiu is resistant to grease, oil, cracks, tears and heat up to 80ºC). All standard pieces fulfill DIN 9835 quality requirements. ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 39

40 THERMOPLASTIC 23 LIGHT BLUE 00 WHITE 01 GREY 26 DARK BLUE 07 RED 21 GREY 25 PISTACHIO 24 MUSTARD 22 DARK GREY 10 BLACK 40

41 THERMOPLASTIC TECHNICAL SPECIFICATIONS POLYPROPYLENE (PP): Additives with antistatic, antioxidant and UV stabilisers. A high impact elastomer is used in elements which support a moderate effort (backs, seats and armrests) Excellent behaviour under tension and stretching. Mechanical resistance. High flexibility. Excellent weather resistance. Reduced crystallisation; unaffected by environmental stress cracking. Good chemical and water resistance properties. It does not affect the environment by its absence of chemicals and adhesives. ABS: Thermoplastic derivative from a glassy polymer (styrene-acrylonitrile) and an elastic compound, butadiene. ABS is a plastic stronger than polystyrene and it stands out for resistance to tension and impact. Good mechanical, thermal and chemical resistance. Resistance to fatigue. Strength and robustness. Low temperature ductility. Melting resistance. Brightness. Strength and robustness. Non-toxic and colourless. It can be extruded, molded by injection, blowing and pressing. POLYAMIDE (PA) + 40% FIBER GLASS Additives with antistatic, antioxidant and UV stabilisers. Level 6 (1 to 10). Composition which supports impacts superior to polypropylene (PP), with a greater robustness and superficial hardness. It is used in components which require high resistance to impact, especially in bases and mechanisms. ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 41

42 METAL 00/70 WHITE 05 DARK BLUE 07 SILVER POLISHED 01 GRIS 15 PISTACHIO 09 CHROME 02/72 SILVER 14 ORANGE 10/78 BLACK 77 BURGUNDY 42

43 TECHNICAL SPECIFICATIONS METAL All metal components, aluminum or steel, have epoxy-polyester finish. No toxic or solvent elements. Chromed finished is done over treated steel. PAINTING 1 Electrostatic coat, epoxy bonding 2nd generation. Polymerized 200ºC with nano-ceramics and non-grease treatments to improve better covering and provide then better resistance and lasting. 2 Coating micron thickness (it could be different as per the project requirements). This covering guarantees the finish and maintenance of metal structures. 3 Painting process: Actiu painting plant has minimum environmental impact against the traditional industry processes. Treatment is done by polarized coating and compacted with temperature. We get homogeneous and regular application with 98% of painting and the remaining 2% is used to produce other paints. Paints used are COVs free (Volatile Organic Components) which are very dangerous for the environment. All water used in the process is re-used, so we get zero dump. 4 Antibacterial finish (Optional) ACTIU reserves the right to make technical modifications along with changes to measurements and finishes as it deems fit. It is recommended that you verify any material before making an order. 43

44 Wood Care and protection of wood. Scratches: Use a protector that protects surfaces against marks, scratches and Lift objects up whenever possible. The majority of scratches are made by dragging objects across the wood. Plastic and Rubber: Some plastics contain components that contain soft material. When you put some wooden objects on this which contain some components which may damage the finish, resulting in shades or prints. To avoid this, use flet or leather mats on the table. Do not use mats covered in plastic. Avoid leaving plastic folders or files on the table preventing the wood breathing. Light effects: As with leather, wood changes over time. Light - affects wood which causes a change in colour. Each species of wood changes. Some adopt a warm tone while others become darker or lighter. Move objects and accessories frequently so as to avoid shadows on the wooden surface. Reflection: Trees contain a vascular system of fibres which carry the sap to every corner. These fibres cause the wood to reflect light in different ways, depending on how it is made up. For example, a table and extension, having different fibres will look like different shades. But if you walk around, you will notice how the light changes on work surfaces and the effects of brightness and velvet on the wood. Avoid temperatures and extreme humidity. Clean with any Commercial products suitable for cleaning and maintenance for treated wood surfaces, wax basis, aliphatic hydrocarbon or seed oil surfactant. Always wipe the surface in the direction of the grain. Remove stains. Do not use products with silicon. 44

45 Fabrics Each material has a specific feature, albeit technical or aesthetic. If the stain has dried, try to remove the excess by hand or by using a brush. Place a cleaner on the stain and continue with a PH neutral cleaner with a neutral cleaning agent such as soapy water. It is important to rinse with clean water. Types of stains: Oil: Treat with a solvent or treat with a colour fixing agent. Alcohol: Fresh stains: Treat with a household vinegar and rinse immediately. Dried Stains: Treat with a whitening oxidizing agent. Pen: Treat with a colour fixing agent. Coffee: Fresh stains: Treat with household vinegar, and rinse immediately. Dried Stains: Treat with a whitening oxidizing agent. Wax for furniture: Treat with a colour fixing agent. Chewing gum: Treat with a solvent. Chocolate: Fresh stains: Treat with soap or liquid soap for hands, rinse immediately or treat with solvent. Cream: Fresh stains: Treat with soap or liquid soap for hands, rinse immediately. Grease: Treat with a colour fixing agent. Lip stick: Treat with a colour fixing agent or treat with a colour fixing agent. Milk: Fresh stains: Treat with soap or liquid soap for hands, rinse immediately. Butter: Treat with a colour fixing agent. Fresh stains: Treat with soap or liquid soap for hands, rinse immediately. Urine: Fresh stains: Treat with soap or liquid soap for hands, rinse immediately. Blood: Fresh stains: Treat with soap or liquid soap for hands, rinse immediately. Tea: Fresh stains: Treat with household vinegar, and rinse immediately. Dried Stains: Treat with a whitening oxidizing agent. Ink: Treat with a colour fixing agent. Wine: Fresh stains: Treat with household vinegar, and rinse immediately. Dried Stains: Treat with a whitening oxidizing agent. Fruit juice: Treat the stain with a whitening oxidizing agent or treat with a colour fixing agent. 45

46 Leather Leather is a natural material, probably the toughest upholstery and requires specific care. Wipe gently. Use a cream once or twice a year. Do not use shoe polish. Types of stains. Water: Soak and leave to dry before brushing. Pen: Alcohol 90% Coffee: Mix water with a little ammonia. Grease: Apply a grease solvent spray. Leave to dry. Brush. Wax stains: Apply a grease solvent spray. Leave to dry. Brush. Other stains: Consult with a specialist. Pen: Warm skimmed milk and lemon juice. Water based felt-tips: Water and if neccessary a little bit of lemon. Permanent Ink: Cannot be removed It is recommended that you clean the upholstery every two weeks, to prevent an accumulation of dirt ( for example skin particles that can be inserted into the fabric.) Visitors chairs need less cleaning than work chairs which are used daily. It is essential to use a soft fibre brush on a vacuum to prevent damage to the fabric surface. The dried in dirt on the surface will disappear after a thorough cleaning. As for wet marks and stains that will not disappear after cleaning with a vacuum, we suggest the following solutions: Mix water with a PH neutral cleaner. The temperature of the water must be between 25 and 35 degrees. A running liquid may also be used but don t overdose. Clean the stains several times, using a soft fabric until they are no longer perceptible. It is essential not to use too much water and avoid soaking the foam, which could damage the chair. After 3 washes, rinse with water. Press with a dry fabric against the other fabric to remove the moisture as much as possible. If the result is not completely satisfactory, repeat the process. 46