WJEC PATHWAYS - ENTRY QUALIFICATIONS
|
|
- Arthur Campbell
- 5 years ago
- Views:
Transcription
1 WJEC PATHWAYS - ENTRY QUALIFICATIONS Title Unit Ref. No. The effects of consumerism K/617/3329 D/617/3330 Entry Code 6240/E2 6240/E3 Level Entry 2/3 Credit Value 3 Unit aim This unit aims to enable learners to know about the production of consumer goods, the way in which it affects people, particularly children, and the organisations that aim to protect them. 1
2 Learning outcomes To be awarded credit for this unit, the learner will: LO1 Know about popular consumer goods. LO2 Know how the production of some popular consumer goods can affect the lifestyles of producers and affect the environment. LO3 Know about the work of organisations that aim to protect children from exploitation. Assessment Criteria Entry 2 Assessment of the learning outcome will require a learner to demonstrate that they can: AC1.1 List consumer goods popular with young people. AC1.2 List where some of these popular consumer goods are produced. AC2.1 Identify ways in which production of some popular consumer goods affects the environment. AC2.2 Show some features of working conditions of producers of some popular consumer goods in other countries. AC2.3 State why children are employed in these factories. AC3.1 List organisations that aim to protect children. AC3.2 Show the work of one organisation that aim to protect children. Assessment Criteria Entry 3 Assessment of the learning outcome will require a learner to demonstrate that they can: AC1.1 Identify consumer goods popular with young people. AC1.2 Identify where some of these popular consumer goods are produced. AC2.1 Outline how production of some popular consumer goods affects the environment. AC2.2 Outline working conditions of producers of some popular consumer goods in other countries. AC2.3 Give reasons why children are employed in these factories. AC3.1 Identify organisations that aim to protect children. AC3.2 Outline the work of one organisation that aims to protect children. 2
3 2. SUGGESTED UNIT CONTENT The following suggestions should be considered in the context of: the level the learner is working at either Entry 2 or Entry 3 the level is determined not by the amount of work completed but should demonstrate achievement of the specific assessment criteria. Completion should be closely linked to the command words used in the assessment criteria. centre facilities and resources teaching time and curriculum organisation providing opportunities for progression including studying a Humanities based subject to GCSE level This unit is open-ended in its coverage. There are a number of different ways of approaching it. The following section is designed to assist teachers in approaching the issue of content. The choice of consumer goods studied is very much down to the teacher, but the content and context chosen must be capable of delivering the learning outcomes associated with the unit. The learning outcomes do not have to be taught separately but can be integrated and taught as a whole. LO1: Know about popular consumer goods Learners must know about: consumer goods popular with young people e.g. designer trainers, i-pads, designer label clothes, fast food, head phones, computer games where in the world some of these goods are produced LO2: Know how the production of some popular consumer goods can affect the lives of the producers and effect the environment Learners must know about: how production of consumer goods can affect the environment e.g. use of natural resources, water, energy etc., the amount of non-biodegradable materials produced and use of chemicals and dyes damage to the environment done by goods travelling all round the world to their destinations features of working conditions in some of these places such as overcrowding, no breaks, unsafe buildings, fire hazards, chemical hazards, long hours or low pay some of the dangers these conditions particular present for children e.g. physical and emotional abuse, limited access to education, little fresh air or exercise, why children are employed. Reasons may include lack of legislation to secure the rights of children, often have no family as a result of disease so they are vulnerable to exploitation and often responsible for younger siblings, extreme poverty in many of the countries where these goods are produced so children have to work, lack of awareness of the damage done to children in these circumstances LO3: Know the work of organisations that aim to protect children Learners must know about: a range of organisations that aim to protect children such as Save the Children, World s Children, Railway Children, UNICEF, Childline in India, World Vision etc., the support provided by al least one organisation such as providing a safe place to live, education, training, safety, healthcare, nutrition, work for community and government change. 3
4 3. DELIVERY 3.1 Planning Courses Achievement of each unit is confirmed through a statement of achievement, so that learners will gain some recognition for all completed work. This unit will contribute to the completion of an Entry Pathways qualification in Humanities. For full details of the qualifications (Awards and Certificates) and rules of combination, please refer to the WJEC Entry Level Pathways specification. Closely related units likely to be delivered along with The Effects of Consumerism are: Taking a role in society in the UK Climate change Changing trends in tourism Threatened ecosystems Choosing a combination of the above units would work towards an Entry Pathways qualification in Humanities, with a particular focus on distinctive and topical themes on Geography. Alternatively, this unit can be studied with other units in the Humanities suite focus on the areas of History and Religious Studies. 3.2 Resources No specific resources have been written for this unit. Teachers and learners are advised to gather relevant information using general textbooks, websites, digital resources, magazines, television programmes and films. One useful area of resources and support for teachers of Entry Pathways units is available on the WJEC website. The site can be found here: Teachers will find a wide range of supporting materials. Much of this material is intended to be downloaded so that it can be edited by teachers to suit the needs of their own learners and centres. Ethical Trade.org has details about child labour and resources and information that can be used. School text books e.g. Folens Specials on Global Issues, the Environment, Sustainable Development. Films about the exploitation of children such as Slumdog Millionaire. Web sites including: World Vision Child Line in India World s Children Young Peoples Trust for the Environment resources, talks, download Barnado s website Outlines many categories of child exploitation in a fairly simple way and also explores solutions. Other charities provide useful videos or leaflets 4
5 4. Assessment 4.1 Ways of demonstrating that the criteria have been met All Entry Pathways units are internally assessed and externally moderated.the following principles apply to the assessment of each unit: all assessment criteria must be met for unit learning outcomes to be achieved for units provided for Entry 2 and Entry 3, criteria must be met in full at each level tasks may be chosen from examples given by WJEC (see below) or set by the centre Entry Pathways Humanities has no set tests or assessments. WJEC will provide some suggestions that can be developed to provide evidence that the assessment criteria for each learning outcome have been met. It is hoped that teachers will build on some of these suggestions and develop activities of their own to provide assessments appropriate for their learners. In practice, ways of demonstrating that the criteria have been met will vary according to centre type, the nature of learners and curriculum organisation. In addition, different learners within the same teaching group can demonstrate achievement of assessment criteria in different ways. However, the following general types of activities are likely to feature as ways of demonstrating that the assessment criteria have been met: Posters General activity Written work Map work Oral presentations Contributing to group discussions Powerpoint presentations Use of visual images such as photographs Storyboards Case studies Interviews Surveys and questionnaires Group discussions Possible purpose Identify popular consumer goods and where they are made Outline the work of charities that work with children who help to produce consumer goods Illustrate locations that produce consumer goods Give information about working conditions that are connected with production of consumer goods Offer an opinion on the quality of consumer goods that you have bought Present information about child labour in the past and today Illustrate examples of poor working conditions or damage to the environment Illustrate real life situations of people who help to produce consumer goods Outline the work of children's charities working overseas Ask about people's experience of buying consumer goods Collect opinions on exploitation of workers who help to produce consumer goods Talk about issues such as working conditions, work of charities and other organisations 5
6 4.2 Examples of tasks: Examples of tasks that can be used with learners to show evidence of meeting the assessment criteria. LO1: Know about popular consumer goods At Entry 2, learners could: produce a poster or presentation featuring themselves at the centre (photo or sketch) and either draw or cut and paste some of the consumer goods they own or would like to own make a poster showing consumer goods popular with young people conduct a simple survey with their class finding out what consumer good others own. Make a chart of their findings having identified consumer goods list where they are produced research major brands and list where they are produced At Entry 3, learners could: produce a poster or presentation featuring themselves at the centre (photo or sketch) and either draw or cut and paste some of the consumer goods they own or would like to own make a booklet identifying consumer goods popular with young people annotate a map of the world showing where these goods are produced using a map of the world identify and outline where some of these consumer goods are produced interview friends and relatives about whether they know where these goods are produced. Record the findings in an appropriate way LO2: Know how the production of some popular consumer goods can affect the lives of producers and affect the environment At Entry 2, learners could: produce a case study or storyboard of one popular consumer item for young people e.g. trainers and find out about workings conditions in the factories that produce them produce a poster showing environmental effects caused by production of some consumer goods make a collage of working conditions in some of these factories complete sorting exercise of why children are exploited answer questions about what it would be like to work in one of these factories produce a poster showing the dangers for young people in these factories At Entry 3, learners could: give information, written, visual or spoken, outlining the working conditions that workers who produce these popular goods outline, in writing or orally, the effects that this type of consumerism has on the producing countries (both good and bad) give a short speech or take part in a role play which covers the consequences of consumerism on the environment. This may relate to one specific product or several select, from a list of options, some causes of child exploitation and give reasons why these cause exploitation 6
7 LO3: Know about the work of organisations that aim to protect children from exploitation At Entry 2, learners could: pick out from a word search names of organisations that aim to protect children select, from a list, some ideas to end child exploitation participate in a discussion about ways to end child exploitation produce a poster illustrating the work that organisations do to protect children At Entry 3, learners could research organisations that attempt to deal with problems of child exploitation and make some notes about the kind of work they do produce a poster / powerpoint / leaflet that could be used in their school to raise awareness of child exploitation make a list of Health and Safety rules and use these to write an imaginary report from a Health and Safety perspective on conditions in some of these factories imagine they work for an organisation that aims to protect children and give some information outlining the work that they do 4.3 Recording Assessment will be recorded on the relevant assessment record by indicating successful completion of each Assessment Criterion. Where a unit is provided at both Entry 2 and Entry 3, Learning Outcomes may be common but Assessment Criteria will be differentiated and must be met at the relevant level. All criteria must be met for the unit to be achieved and credit awarded. Copies of the assessment records are on pages 9 and 10. 7
8 5. ADMINISTRATIVE ARRANGEMENTS For details of administrative arrangements, please refer to the WJEC Entry Pathways specification, which includes information about: Entry Procedures Internal Assessment and External Moderation Awarding and Reporting Issue of Results Access Arrangements Post-Results Services. Essential points to note with regard to administrative arrangements Submit all work by unit and not by candidate. Ensure that all candidate work submitted for moderation is fully marked and annotated. Annotate completed candidate work with the relevant assessment criteria, e.g. AC 1.3 or AC 3.2, showing where and how the work presented has met the required assessment criteria. Check that ALL assessment criteria have been met for each unit by each candidate. Do not submit work for moderation if all assessment criteria have not been clearly and fully met. Complete in full the Assessment Record Sheet for each unit for individual candidates, ensuring it is signed the teacher, including as much detail as possible on where and how assessment criteria have been met. 8
9 The effects of consumerism ENTRY 2 WJEC ASSESSMENT RECORD Candidate Name Centre Name Candidate No. Centre No. LO Assessment Criteria Met Evidence LO1 LO2 LO3 AC1.1 List consumer goods popular with young people. AC1.2 List where some of these popular consumer goods are produced. AC2.1 Identify ways in which production of some popular consumer goods affects the environment. AC2.2 Show some features of working conditions of producers of some popular consumer goods in other countries. AC2.3 State why children are employed in these factories. AC3.1 List organisations that aim to protect children. AC3.2 Show the work of one organisation that aim to protect children. General Comments: Teacher: Moderator: Date: Date: 9
10 The effects of consumerism ENTRY 3 WJEC ASSESSMENT RECORD Candidate Name Centre Name Candidate No. Centre No. LO Assessment Criteria Met Evidence LO1 LO2 LO3 AC1.1 Identify consumer goods popular with young people. AC1.2 Identify where some of these popular consumer goods are produced. AC2.1 Outline how production of some popular consumer goods affects the environment. AC2.2 Outline working conditions of producers of some popular consumer goods in other countries. AC2.3 Give reasons why children are employed in these factories. AC3.1 Identify organisations that aim to protect children. AC3.2 Outline the work of one organisation that aims to protect children. General Comments: Teacher: Moderator: Date: Date: The Effects of Consumerism/LG
Sustainable Development
The Further Education and Training Awards Council (FETAC) was set up as a statutory body on 11 June 2001 by the Minister for Education and Science. Under the Qualifications (Education & Training) Act,
More informationGeneral Certificate of Education Design and Technology: Product Design 3D
General Certificate of Education Design and Technology: Product Design 3D PROD2 Report on the Examination 2550 June 2013 Version: 1.0 Further copies of this Report are available from aqa.org.uk Copyright
More informationGarment Design for Manufacture: An Introduction (SCQF level 6)
National Unit specification: general information Garment Design for Manufacture: An Introduction (SCQF level 6) Unit code: FP56 12 Superclass: JK Publication date: September 2011 Source: Scottish Qualifications
More informationArchitectural Design Sketching and Drawing
Higher National Unit Specification General information for centres Unit title: Architectural Design Sketching and Drawing Unit code: DW3R 34 Unit purpose: This Unit is designed to enable the candidate
More informationThis Unit is suitable for learners who have limited or no experience of construction or of technical drawing.
National Unit specification General information Unit code: H66E 45 Superclass: TD Publication date: January 2014 Source: Scottish Qualifications Authority Version: 01 Unit purpose This Unit is designed
More informationGCSE Design & Technology: Resistant Materials Technology (45602) Controlled Assessment Tasks and Guidance
GCSE Design & Technology: Resistant Materials Technology (45602) Controlled Assessment Tasks and Guidance FOR SUBMISSION IN SUMMER 2015 AND SUMMER 2016 The Controlled Assessment tasks that were for submission
More informationUNIT Art and Design: Digital Media (SCQF level 6)
National Unit Specification: general information CODE F5CH 12 SUMMARY This Unit is designed to enable the candidate to explore and develop skills in digital media related to art and design disciplines.
More informationVertical black lines indicate a significant change or addition to the previous version of this specification.
GCSE Specification Art and Design Full Course for exams June 2010 onwards and certification June 2011 onwards Short Course for exams June 2010 onwards and certification June 2010 onwards This specification
More informationDesign and Technology Subject Outline Stage 1 and Stage 2
Design and Technology 2019 Subject Outline Stage 1 and Stage 2 Published by the SACE Board of South Australia, 60 Greenhill Road, Wayville, South Australia 5034 Copyright SACE Board of South Australia
More informationEco-Schools Curricular Maps - Litter Topic
Eco-Schools Curricular Maps - Litter Topic The series of Outcome Maps in this document suggest how Curriculum for Excellence (CfE) Experiences and Outcomes may be delivered through the Eco-Schools Litter
More informationABC GCSE DESIGN AND TECHNOLOGY: RESISTANT MATERIALS TECHNOLOGY (4562) CONTROLLED ASSESSMENT TASKS AND GUIDANCE
ABC GCSE DESIGN AND TECHNOLOGY: RESISTANT MATERIALS TECHNOLOGY (4562) CONTROLLED ASSESSMENT TASKS AND GUIDANCE 2009 AQA GCSE Resistant Materials Technology Controlled Assessment Tasks The following are
More informationNew A Level Design and Technology: Product Design
New A Level Design and Technology: Product Design Information for OCR centres transferring to new specifications for first teaching in September 2008 This document maps the current A Level Design and Technology:
More informationCREATIVE imedia. Cambridge NATIONALS LEVEL 1/2. Sample Learner Work with commentary. ocr.org.uk/creativeimedia
Cambridge NATIONALS LEVEL 1/2 CREATIVE imedia Sample Learner Work with commentary Unit R083: Creating 2D and 3D digital characters LO4 - Be able to review 2D and 3D characters Version 1 ocr.org.uk/creativeimedia
More informationTuesday 19 May 2015 Morning
Oxford Cambridge and RSA Tuesday 19 May 2015 Morning GCSE DESIGN AND TECHNOLOGY Textiles Technology A575/01 Sustainability and Technical Aspects of Designing and Making *1107283905* Candidates answer on
More informationDESIGN AND TECHNOLOGY
N E W S O U T H W A L E S HIGHER SCHOOL CERTIFICATE EXAMINATION 1997 DESIGN AND TECHNOLOGY 2/3 UNIT (COMMON) (40 Marks) Time allowed One hour and a half (Plus 5 minutes reading time) DIRECTIONS TO CANDIDATES
More informationSupport Notes (Issue 1) September Certificate in Digital Applications (DA104) Game Making
Support Notes (Issue 1) September 2016 Certificate in Digital Applications (DA104) Game Making Platformer Key points for this SPB The DA104 SPB 0916 is valid for moderation in June 2017, December 2017,
More informationART AND DESIGN BTEC. Comparing unit content FIRST
BTEC FIRST Comparing unit content ART AND DESIGN Edexcel BTEC Level 1/Level 2 First Award in Art and Design (NQF) Edexcel BTEC Level 2 First Extended Certificate in Art and Design (QCF) ART AND DESIGN
More informationENGINEERING. Unit 4 Electrical, electronic engineering operations and application Suite. Cambridge TECHNICALS LEVEL 2
2016 Suite Cambridge TECHNICALS LEVEL 2 ENGINEERING Unit 4 Electrical, electronic engineering operations and L/615/2134 Guided learning hours: 60 Version 1 September 2016 ocr.org.uk/engineering LEVEL 2
More informationLevel 2 VRQ Qualifications in Photo Imaging (7512)
Level 2 VRQ Qualifications in Photo Imaging (7512) Assessment pack www.cityandguilds.com September 2012 Version 3.0 About City & Guilds City & Guilds is the UK s leading provider of vocational qualifications,
More informationImagery Electronic Multimedia Radio , , 10224, , , , 10319, 10320
Page 1 of 6 FIELD ARTS AND CRAFTS Review of Electronic Media qualifications and unit standards Qualifications Qualification title Reference National Certificate in Radio (Announcing) 0296 National Certificate
More informationPrinciples and Operation of Three-phase Systems
Unit 62: Principles and Operation of Three-phase Systems Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose H/600/7116 BTEC Nationals This unit provides learners with knowledge
More informationCLANCY CATHOLIC COLLEGE
CLANCY CATHOLIC COLLEGE Year 8 Technology Mandatory Rotation 3 GUMBALL Portfolio & Project Task 4 NAME: TEACHER: Term 4 Week 6 (Circle) 10/11/14 11/11/14 12/11/14 13/11/14 14/11/14 Period: KLA: TAS WEIGHTING:
More informationLevel 1 VRQ Qualifications in Photo Imaging (7512) Assessment pack
Level 1 VRQ Qualifications in Photo Imaging (7512) Assessment pack www.cityandguilds.com May 2012 Version 1.1 About City & Guilds City & Guilds is the UK s leading provider of vocational qualifications,
More informationYEAR 9 HISTORY. The Industrial Revolution transformed the lives of people in Britain, and eventually the world forever.
YEAR 9 HISTORY Assessment: Number 1 Topic: The Industrial Revolution Value: 50% Due: Thursday 23 rd March Week 8, Term 1 The Industrial Revolution transformed the lives of people in Britain, and eventually
More informationHigher National Unit specification. General information for centres. Photography: Darkroom Techniques. Unit code: DW81 34
Higher National Unit specification General information for centres Unit title: Photography: Darkroom Techniques Unit code: DW81 34 Unit purpose: This Unit is designed to enable the candidate to research,
More informationLearning Graphic Design and Illustration
A Correlation of and Narrative Summary of Learning Graphic Design and Illustration 2017 To the Tennessee Career College and Technical Education Standards Digital Arts & Design I Pearson Education, Inc.,
More informationPolicy for Art and Design
Policy for Art and Design POLICY FOR ART AND DESIGN Document Purpose This document reflects NPS values and philosophy in relation to the teaching and learning of Art and Design. It sets out a framework
More information-SQA-SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION. -Module Number Session
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION -Module Number- 8170074 -Session-1994-95 -Superclass- KE -Title- PHOTOGRAPHY: INTRODUCTION TO
More informationThe following surface mount LED s are suitable as additional LEDs for mounting on the module:
MOBILE PHONE MODULE The mobile phone module is designed to flash a light pattern when a phone signal is detected. The module will react to either incoming or outgoing signals. The module will detect frequencies
More information2017 Edexcel Product Design Taster Session/Summer Prep.
This is how the A-Level course is broken down: Component 1: Principles of Design and Technology A written examination of 2 hours 30 minutes. This makes up 50% of the qualification and marked out of 120.
More informationCLANCY CATHOLIC COLLEGE TAS Year 8 - Rotation 1: Mixed Materials (Gumball)
CLANCY CATHOLIC COLLEGE TAS- 2014 Year 8 - Rotation 1: Mixed Materials (Gumball) Handed Out: Term 1 Week 3 (Circle) 10/2/14 11/2/14 12/2/14 13/2/14 14/2/14 Period: Term 2 Week 2 (Circle) 5/5/14 6/5/14
More informationUNIT Photography: Portraiture Skills (SCQF level 6)
National Unit Specification: general information CODE F51P 12 SUMMARY This Unit is designed to enable the candidate to research styles of photographic portraits from both historical and contemporary periods
More information1.1 Investigate the capabilities and limitations of a range of digital gaming platforms
Unit Title: Game design concepts Level: 2 OCR unit number: 215 Credit value: 4 Guided learning hours: 30 Unit reference number: T/600/7735 Unit purpose and aim This unit helps learners to understand the
More informationMindfulness Teacher. Training Programme
me We know from personal experience how helpful mindfulness can be to people whatever their circumstances. But we also recognise the importance of mindfulness being introduced by teachers/therapists/coaches
More informationIndustrial Practices, Systems and Control at Key Stage 4
Industrial Practices, Systems and Control at Key Stage 4 Abstract This article discusses the relationship between designing and making processes followed in design and technology and industrial and commercial
More informationGrand Avenue Primary and Nursery School. A Policy for Design and Technology. Contents
Grand Avenue Primary and Nursery School A Policy for Design and Technology Contents 1. Rationale 2. Aims 3. Teaching and Learning Experiences 4. Time Allocation 5. Planning 6. Monitoring and Evaluation
More informationNational Unit Specification: General Information
National Unit Specification: General Information UNIT Multimedia Computing: Introduction to Digital Photography (Intermediate 2) NUMBER 8110178 COURSE SUMMARY Using a digital camera and related computer
More informationSkylands Learning is your trusted learning advisor. That is our promise your trusted learning advisor. Four simple words.
Page 1 of 12 METHODOLOGY Who we are Skylands Learning is your trusted learning advisor. That is our promise your trusted learning advisor. Four simple words. Not enough information? At Skylands, we have
More informationArrangements for: National Progression Award in Food Manufacture (SCQF level 6) Group Award Code: GF4N 46. Validation date: July 2012
Arrangements for: National Progression Award in Manufacture (SCQF level 6) Group Award Code: GF4N 46 Validation date: July 2012 Date of original publication: Version: 03 Acknowledgement SQA acknowledges
More informationArt at Cox Green Curriculum Plan. Key Stage 4 Year 9 Term I Term 2 Term 3 Term 4 Term 5 Term 6
Term 6 (Early rotation) Introductory module 1. Drawing, painting and colour theory. Study Analysis and annotation. Research. Critical and contextual studies. The formal Observational drawing skills: Line,
More informationUNIT Fundamental Electronics (SCQF level 6)
National Unit Specification: general information CODE F5DB 12 SUMMARY This Unit introduces candidates to the principal devices used in electronics and to the principles of their operation, function and
More informationQualification Specification. Level 1 Diploma in Providing a Gateway to Smart Engineering
Qualification Specification Level 1 Diploma in Providing a Gateway to Smart Engineering ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Centre requirements 5 Support for candidates 5
More informationCoimisiún na Scrúduithe Stáit. State Examinations Commission. Leaving Certificate Examination 2010
Coimisiún na Scrúduithe Stáit State Examinations Commission Leaving Certificate Examination 2010 Technology Coursework Briefs Ordinary Level and Higher Level 200 marks The Thematic Briefs for the Leaving
More informationDesign and technology
Design and technology Programme of study for key stage 3 and attainment target (This is an extract from The National Curriculum 2007) Crown copyright 2007 Qualifications and Curriculum Authority 2007 Curriculum
More informationMSc Chemical and Petroleum Engineering. MSc. Postgraduate Diploma. Postgraduate Certificate. IChemE. Engineering. July 2014
Faculty of Engineering & Informatics School of Engineering Programme Specification Programme title: MSc Chemical and Petroleum Engineering Academic Year: 2017-18 Degree Awarding Body: University of Bradford
More informationDesign and Technology
Design and Technology GCSE 2012 D&T: Textiles Technology Teachers Handbook J307 Version 1 September 2012 www.ocr.org.uk/gcse2012 Contents Introduction 3 Subject specific guidance 4 Resources 7 Other forms
More informationART AND DESIGN SPECIMEN ASSESSMENT MATERIALS GCE A LEVEL. WJEC Eduqas GCE A LEVEL in. Teaching from 2015 ACCREDITED BY OFQUAL
GCE A LEVEL WJEC Eduqas GCE A LEVEL in ART AND DESIGN ACCREDITED BY OFQUAL SPECIMEN ASSESSMENT MATERIALS Teaching from 2015 This Ofqual regulated qualification is not available for candidates in maintained
More informationOutcome 3 Evaluate the outcomes of the design and production activities, and promote the product's design features to the client and/or end-user.
2010 School-assessed Task Report Design and Technology: Units 3 and 4 BACKGROUND INFORMATION The School-assessed Task is commenced in Unit 3 and completed in Unit 4. Components of the task relate to Unit
More informationMultimedia Computing: Introduction to Digital Photography (SCQF level 5)
National Unit Specification: general information CODE D0F7 11 SUMMARY Use a digital camera and related computer software within the context of multimedia computing. OUTCOMES 1 Describe the principles of
More informationLevel 2 Award, Certificate and Diploma in Creative Techniques [7112] Level 2 Floral units
Level 2 Award, Certificate and Diploma in Creative Techniques [7112] Level 2 Floral units www.cityandguilds.com March 2011 Version 2.4 About City & Guilds City & Guilds is the UK s leading provider of
More informationIntroduction. Unit 1. Unit 2. 2D and 3D Visual Language. Materials, Techniques and Technology
Introduction Unit 1 2D and 3D Visual Language These units introduce the student to several themes which can be reinforced through an exploration of their application in the workplace. They include; and
More information01. , 02. letter, 03. essay, 04. article, 05. leaflet, 06. review, 07. report, 08. story
0 E-mail Imagine that your name is Angelos/Angela. A good friend of yours has done something that has annoyed you. You didn't say anything at the beginning, but now you understand that if you keep it inside,
More informationStudent Friendly Assessment for KS3 Design & Technology
Student Friendly Assessment for KS3 Design & Technology It is important to remember that students need to feel an ownership for their assessment process so that they are able to make effective progress.
More informationH5ST 04 (SCDHSC0370) Support the Use of Technological Aids to Promote Independence 1
H5ST 04 (SCDHSC0370) Support the Use of Technological Aids to Promote Independence Overview This standard identifies the requirements when you support individuals to use technological aids to promote their
More informationEMPLOYABILITY EMPLOYABILITY SKILLS 10345, 10346, 10347, 10348, 10349, COMMAND VERBS
EMPLOYABILITY EMPLOYABILITY SKILLS 10345, 10346, 10347, 10348, 10349, 10350 COMMAND VERBS We recognise that as a practitioner you will have a lot of teaching experience, however, you may find it useful
More informationY56 Art and Design Medium Term Planner Self Portraits Autumn 2018 Template. Advised curriculum coverage maximum three media per year
Exploring and Developing Ideas Evaluating and Developing Work Select and record from first hand observation, experience and imagination, and explore ideas for Compare ideas, methods and approaches in their
More informationActivity Tourism and Special Interest Pursuits: An Introduction (SCQF level 6)
National Unit specification: general information Unit code: H0BD 12 Superclass: NK Publication date: January 2012 Source: Scottish Qualifications Authority Version: 02 Summary This Unit is primarily intended
More informationOCR Entry Level Certificate in Art and Design R310
Regulated OCR Entry Level Certificate in Art and Design R310 Teacher s handbook Version 2: First assessment 2018 OCR 2017 v2.1 QN: 603/0285/9 Contents Contents... 2 1 Introduction... 3 1a. What is the
More informationUNIT Earthing and Earth Fault Current Protection (SCQF level 6)
National Unit Specification: general information CODE F5HD 12 SUMMARY This Unit is intended for candidates with little or no prior knowledge of earthing systems for electrical installations, and the protection
More informationThe Sustainable Tourism Programme of the 10-Year Framework of Programmes on Sustainable Consumption and Production
The Sustainable Tourism Programme of the 10-Year Framework of Programmes on Sustainable Consumption and Production Generating collective impact Scaling up and replicating Programmatic implementation Helena
More informationFINAL EXAMINATION TIMETABLE JUNE 2018
GCSE, ENTRY LEVEL CERTIFICATE, LEVEL 2 AWARD, PROJECT LEVELS 1 & 2, LEVEL 1 & 2 CERTIFICATE AND CAMBRIDGE NATIONALS FINAL EXAMINATION TIMETABLE www.ocr.org.uk GCSE, Entry Level Certificate, Level 2 Award,
More informationDocumentation. Internal assessment. The roles to be undertaken for assessment purposes must be one of the following:
The roles to be undertaken for assessment purposes must be one of the following: Although other functions (such as musical composition, costume design and acting) are integral to many kinds of film-making,
More informationDesign and make a Helicopter
Design and make a Helicopter Pupil Name Key Stage 2 Learning Points (from the National Curriculum) Specific to this project. Design Technology D1 work confidently within a range of contexts, such as the
More informationDesign, Technology and Engineering
BOARD-ACCREDITED, PRE-EDITED DRAFT Design, Technology and Engineering 2020 Subject Outline Stage 1 and Stage 2 This subject outline has been accredited. It is provided in draft, pre-edited form for planning
More informationSAMPLE ASSESSMENT TASKS MATERIALS DESIGN AND TECHNOLOGY ATAR YEAR 12
SAMPLE ASSESSMENT TASKS MATERIALS DESIGN AND TECHNOLOGY ATAR YEAR 1 Copyright School Curriculum and Standards Authority, 015 This document apart from any third party copyright material contained in it
More informationExcelling. throughh life. Empathy for others
Global Citizen Excelling throughh life Enriching lives Empathy for others The Gl bal Citizenship Award Introduction The International Global Citizen s Award is a new programme which encourages young people
More informationUnit Title: Drawing Concept Art for Computer Games
Unit Credit Value: 10 Unit Level: Three Unit Guided Learning Hours: 60 Ofqual Unit Reference Number: A/502/5675 Unit Review Date: 31/12/2016 Unit Sector: 9.3 Media and Communication Unit Summary The aim
More informationUniversity of Northampton. Graduate Leaders in Early Years Programme Audit Monitoring Report by the Quality Assurance Agency for Higher Education
Graduate Leaders in Early Years Programme Audit Monitoring Report by the Quality Assurance Agency for Higher Education November 2014 Contents Report of monitoring visit... 1 Section 1: Outcome of the monitoring
More informationProgramme Title: BSc (Hons) Business Management (Full Time and Part Time) On Campus Division. URL None
Programme Specification Programme Title: BSc (Hons) Business (Full Time and Part Time) Awarding Institution: Teaching Institution: Division and/or Faculty/Institute: Professional accreditation University
More informationVCE Media: Administration information for School-based Assessment in 2018
VCE Media: Administration information for School-based Assessment in 2018 Units 3 and 4 School-assessed Task The School-assessed Task contributes 40 per cent to the study score and is commenced in Unit
More informationSOUTH AFRICAN QUALIFICATIONS AUTHORITY REGISTERED QUALIFICATION: Occupational Certificate: Visual Merchandiser
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is
More informationEngineering. Engineering. Specification GCSE J344 Double Award J322 Single Award Version 2 August 2013
Engineering GCSE 2012 Engineering Specification J344 Double Award J322 Single Award Version 2 August 2013 www.ocr.org.uk/gcse2012 A FEW GOOD REASONS TO WORK WITH OCR l You can enjoy the freedom and excitement
More informationProcess Operations: Oil and Gas Separation
National Unit specification: general information Unit code: FM3C 11 Superclass: YC Publication date: May 2011 Source: Scottish Qualifications Authority Version: 01 Summary This Unit is designed for candidates
More informationHow / why / what / who / where / when...?
Annemarie Mink Can you describe your normal day to day activities? (Getting up, eating, working, leisure, sleeping, other) Do you have sufficient time to do all the things you want in a day? When do you
More informationHigher National Unit specification: general information
Higher National Unit specification: general information Unit code: H17R 35 Superclass: CB Publication date: March 2012 Source: Scottish Qualifications Authority Version: 01 Unit purpose This Unit is designed
More information1. WHAT AREAS OF LEARNING DOES THIS ASSESSMENT ADDRESS?
11 Legal Studies TASK 1: The Australian Legal System Due Date: Friday 24 th March 2017 Date Distributed: Wednesday 1 st March 2017 Task Weighting: 20% Outcomes P1. identifies and applies legal concepts
More informationDesign & Technology Department
Design & Technology Department The options available to you at Key Stage 4 Within the Design and Technology Department we offer a range of GCSE and BTEC courses for you to choose from going into year 9
More informationGCE Media Studies. Mark Scheme for June Unit G325: Critical Perspectives in Media. Advanced GCE. Oxford Cambridge and RSA Examinations
GCE Media Studies Unit G325: Critical Perspectives in Media Advanced GCE Mark Scheme for June 2014 Oxford Cambridge and RSA Examinations OCR (Oxford Cambridge and RSA) is a leading UK awarding body, providing
More informationDESIGN TECHNOLOGY POLICY
EDWARD WORLLEDGE ORMISTON ACADEMY DESIGN TECHNOLOGY POLICY Date approved by Governors.... Signed........... Date for Review........ 1 RATIONALE Design and technology is concerned with knowledge about and
More information-SQA- SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION
-SQA- SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION -Unit Number- 8411894 -Superclass- CA -Title- MICROCONTROLLERS: ARCHITECTURE, PROGRAMMING AND APPLICATIONS
More informationReligion Studies Subject Outline Stage 1 and Stage 2
Religion Studies 2019 Subject Outline Stage 1 and Stage 2 Published by the SACE Board of South Australia, 60 Greenhill Road, Wayville, South Australia 5034 Copyright SACE Board of South Australia 2010
More informationShipbuilding Principles: Planning, Production and Assembly
Higher National Unit Specification General information for centres Unit title: Shipbuilding Principles: Planning, Production and Assembly Unit code: DR2F 34 Unit purpose: This Unit is designed to enable
More informationModel Curriculum. Hand Crochet Lace Maker HANDICRAFTS AND CARPET HAND CROCHETED TEXTILES CROCHET LACE MAKER HCS/Q7703, V1.0 3
Model Curriculum Hand Crochet Lace Maker SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: HANDICRAFTS AND CARPET HAND CROCHETED TEXTILES CROCHET LACE MAKER HCS/Q7703, V1.0 3 Hand Crochet Lace Maker
More informationOpinion-based essays: prompts and sample answers
Opinion-based essays: prompts and sample answers 1. Health and Education Prompt Recent research shows that the consumption of junk food is a major factor in poor diet and this is detrimental to health.
More informationWhile entry is at the discretion of the centre, candidates would normally be expected to have attained one of the following, or equivalent:
National Unit Specification: general information CODE F5J6 12 SUMMARY This Unit introduces candidates to operational amplifiers. Knowledge and understanding will be developed through parameter description,
More informationNZQA registered unit standard version 1 Page 1 of 6. Manufacture precast concrete beams and columns
Page 1 of 6 Title Manufacture precast concrete beams and columns Level 3 Credits 25 Purpose People credited with this unit standard are able to: prepare, set up moulds and storage areas, carry out the
More informationGreenfield Primary School DESIGN TECHNOLOGY POLICY
Greenfield Primary School DESIGN TECHNOLOGY POLICY Approved by Governors (date)... Signed on behalf of the Governing Body...... Chair of Governors GREENFIELD PRIMARY SCHOOL DESIGN AND TECHNOLOGY POLICY
More informationSt Joseph s RC Primary School Art and Design Policy
St Joseph s RC Primary School Art and Design Policy September 2017 Let your light shine before others, so that they may see your good work. Matthew 5:16 Mission Statement We believe that each person is
More informationGCSE Chinese (Mandarin) / French / German / Italian / Spanish / Urdu
GCSE Chinese (Mandarin) / French / German / Italian / Spanish / Urdu Additional Exemplar Tasks: Controlled Assessment Writing & Speaking Updated Autumn 2011 Copyright 2011 AQA and its licensors. All rights
More informationFURNITURE FINISHING French polish for furniture finishing
1 of 7 level: 5 credit: 20 planned review date: September 2004 sub-field: purpose: entry information: accreditation option: moderation option: Furniture People credited with this unit standard are able
More informationGuiding Question. Art Educator: Cynthia Cousineau. School: John Grant Highschool. Grade Level: Cycle 2 Secondary (Grade 9-11)
1 Art Educator: Cynthia Cousineau School: John Grant Highschool Grade Level: Cycle 2 Secondary (Grade 9-11) Course: Visual Arts & Digital Media Time Frame: 5-6 hours Example of a Drawing from Prototype
More informationSee the Preface for important information on the organization of the following material.
GRADE 8 See the Preface for important information on the organization of the following material. The Arts (2009) A. DANCE A1. Creating and Presenting A1.1 create dance pieces to respond to issues that
More informationDesign and make a Jet Propelled Car (Balloon Car)
Design and make a Jet Propelled Car (Balloon Car) Pupil Name Key Stage 2 Learning Points (from the National Curriculum) Specific to this project. Design Technology D1 work confidently within a range of
More informationHuman Computer Interaction
Unit 23: Human Computer Interaction Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose T/601/7326 BTEC National The aim of this unit is to ensure learners know the impact
More informationCoordinate finger jointer operations in solid wood manufacturing
Coordinate finger jointer operations in solid wood manufacturing 4547 version 5 Page 1 of 5 Level 4 Credits 20 Purpose People credited with this unit standard are able to: demonstrate knowledge of finger
More information1.1. Investigate the capabilities and limitations of different types of digital camera
Unit Title: Digital photography Level: 2 OCR unit number: 217 Credit value: 5 Guided learning hours: 40 Unit reference number: D/600/9303 Unit purpose and aim This unit helps learners to understand the
More information2012 IELTS test in Australia Writing part (General Training)
01.12 2012 IELTS test in Australia Writing part (General Training) You went to a museum with your elderly friend last week. However he/she found it difficult to walk around the museum. Write a letter to
More informationYears 5 and 6 standard elaborations Australian Curriculum: Design and Technologies
Purpose The standard elaborations (SEs) provide additional clarity when using the Australian Curriculum achievement standard to make judgments on a five-point scale. They can be used as a tool for: making
More informationAn ICE SCULPTURE FAIR Integrated Elementary STEM Project
An ICE SCULPTURE FAIR Integrated Elementary STEM Project The ITEEA Teaching Technology and Engineering STEM Showcase Washington, DC March 2, 2016 4:00 p.m.-5:30 p.m. Exhibit Hall Table # STEM PROJECT:
More informationHome Economics Lower Secondary Subject Area Guidelines. November 2011
Home Economics Lower Secondary Subject Area Guidelines November 2011 Contents Rationale... 1 Planning using these guidelines... 2 Mapping of Essential Learnings and Year 10 Guidelines... 3 Essential Learnings
More information