NETME Centre New Technologies for Mechanical Engineering
|
|
|
- Michael Jeffrey Patrick
- 5 years ago
- Views:
Transcription
1 NETME Centre Faculty of Mechanical Engineering Brno University of Technology Technicka 2896/2, Brno
2 About NETME Centre NETME Centre - New Technologies for Mechanical Engineering - is a regional research and development centre based on high quality research and development conducted at the Faculty of Mechanical Eng. at Brno University of Technology. Site: Technicka 2, Brno Project start: May 2009 Project end: December 2013 Sustainability term: Funding: in financed by MEYS via National Sustainability Programme I with eligible project costs 606 million CZK
3
4 NETME Centre Divisions
5 Scope of centre activities Custom-made research and development Development of new technologies and products (prototypes, licence sales) Experimental activities (testing facilities, laboratories) Consulting, Design, Testing Training centres
6 Division of Power, Process and Environmental Engineering (PPE) Division of Power, Process and Environmental Engineering is focused on research and development in the field of environmental protection and technological solutions in energy production and process engineering. Head of PPE division: Jaroslav Horsky, Prof. Head of Heat Transfer and Fluid Laboratory
7 Division of Power, Process and Environmental Engineering (PPE) Department of Process and Environmental Engineering Heat Transfer and Fluid Flow Laboratory Department of Thermomechanics and Environmental Engineering Department of Energy Engineering Department of Mathematics
8 Laboratory of Energy Intensive Processes
9 Thermal manikin for research into thermal comfort
10 Division of Aircraft and Automotive Technology (AAT) Division of Aircraft and Automotive Technology is focused on research and development in the field of transport technologies focusing on top efficiency and safety, reduction of negative impact on environment and employment of upto-date technologies. Head of AAT division: Jaroslav Juracka, Assoc. Prof. Director of Institute of Aerospace Engineering
11 Division of Aircraft and Automotive Technology (AAT) Department of Aircraft Engineering Department of Automotive Engineering
12 Division of Mechatronics (M) Division of Mechatronics focuses on research and development of unique technical solutions in the field of intelligent electromechanical systems. It integrates research and development potential of institutes at the Faculty of Mechanical Engineering and the Faculty of Electrical Engineering and Communication, Brno University of Technology. Head of M division: Tomas Brezina, Prof. Deputy Director of Institute of Automation and Computer Science brezina@fme.vutbr.cz
13 Division of Mechatronics (M) Department of Adaptive Control Department of Special Electric Machinery Department of Special Fluid Machinery Department of Production Machines Department of Mathematics Department of Engineering Technology Department of Mechanics
14 Division of of Virtual Machine Design and Testing (VMDT) Division of of Virtual Machine Design and Testing focuses on research, education and complex services in the field of new products development. Activities aim to integrate latest knowledge in basic research and applied sciences and multidisciplinary approach of computer, information and communication technologies in design process. Head of VMDT division: Martin Hartl, Prof. Director of Institute of Machine and Industrial Design
15 Division of of Virtual Machine Design and Testing (VMDT) Department of Design and Industrial Design Department of Solid Mechanics, Biomechanics
16 3D Printer Rapid Prototyping SLM 280 HL
17 Division of Advanced Metallic Materials (AMM) Division of Advanced Metallic Materials is focused on studying the structure and properties of metallic materials including topics in surface engineering, such as, electron beam technology, phase analysis for metallic and nonmetallic materials, mechanical tests area, etc. Head of AMM division: Ivo Dlouhy, Prof. Director of Institute of Materials Science and Engineering
18 Division of Advanced Metallic Materials (AMM) Department of Advanced Metallic Materials Department of Solid Mechanics Department of Mathematics
19 Machine for welding and surface heat treatment by means of electron beam PROBEAM K26
20 Contacts Dean of FME Brno University Jaroslav Katolicky, Assoc. Prof. tel.: Division of Mechatronics Tomas Brezina, Prof. tel.: Division of Virtual Machine Design and Testing Martin Hartl, Prof. tel.: Division of Advanced Metallic Materials Ivo Dlouhy, Prof. tel.: Divison of Power, Processes and Environmental Engineering Jaroslav Horsky, Prof. tel.: Division of Aircraft and Automotive Technology Jaroslav Juracka, Assoc. Prof. tel.:
MECHATRONICS Master study program. St. Kliment Ohridski University in Bitola Faculty of Technical Sciences Bitola.
MECHATRONICS Master study program St. Kliment Ohridski University in Bitola Faculty of Technical Sciences Bitola www.tfb.edu.mk 1 2 Contents Mechatronics - an interdisciplinary approach Competences / Invest
International students from non-english speaking backgrounds will be required to take an English language communications course.
Master of Engineering (ME) 2015 These Program Rules should be read in conjunction with the University's policies (http://www.adelaide.edu.au/policies). Overview The Master of Engineering is comprised of
Research Center of Manufacturing Technology
Czech Technical University of Prague, Faculty of Mechanical Engineering g Horská 3, 128 00 Praha 2, tel.: +420 221 990 900, fax: +420 221 990 999 http://rcmt.cvut.cz RCMT Intro The Short Introduction of
M.Tech in Machine Design
M.Tech in Machine Design Department of Mechanical Engineering The National Institute of Engineering Mysore-08 (Established in 1946) A Heritage of Excellence NIE Premier educational institutions in India
B.E. (CGPA) (All Branches) Sem-VII & VIII) Examinations Nov/Dec, 2018
(CGPA) (All Branches) Sem-VII & VIII) Circular No. 283 of 2018 Programme of [ All Branches] ( Sem-VII & VIII) 1) Candidates are required to be present at their respective places of the Examinations fifteen
British Standards Online Best in class, best in practice. raising standards worldwide
British Standards Online Best in class, best in practice http://shop.bsigroup.com/bsol raising standards worldwide Enabling tomorrow s professionals today Giving your students access to an authoritative,
Dipartimento di Meccanica Department of Mechanical Engineering.
Dipartimento di Meccanica Department of Mechanical Engineering www.mecc.polimi.it Structure of the Politecnico di Milano The Campuses of the Politecnico di Milano The 16 Departments of the Politecnico
Department of. Mechanical & Aerospace. Engineering. Developing. Leaders of Innovation
Department of Mechanical & Aerospace Engineering Developing Leaders of Innovation Emphasizing both a tradition of excellence and a pioneering spirit of entrepreneurship in education and research, the U.Va.
Fluid Technology Automation Technology smart buildings Technology
Fluid Technology Automation Technology smart buildings Technology THE PARTNER OF Higher Standards 002003 Hainzl Technology for Higher Standards Engineering & system competence 004-005 Production ServicE
What are the most likely employment avenues (industry and roles) from your discipline of engineering. What industry are you in now?
Chemical Chemical processes, heat and mass transfer, process units, distillation Oil and gas, environmental work, food, pharmaceuticals, manufacturing Last one was oil and gas 8 around 70k I think Chemical
Physics-Based Modeling In Design & Development for U.S. Defense Virtual Prototyping & Product Development. Jennifer Batson Ab Hashemi
Physics-Based Modeling In Design & Development for U.S. Defense Virtual Prototyping & Product Development Jennifer Batson Ab Hashemi 1 Outline Innovation & Technology Development Business Imperatives Traditional
FACULTY OF MECHANICAL ENGINEERING.
FACULTY OF MECHANICAL ENGINEERING www.sjf.tuke.sk History Establishment of the Košice University confirmed Emperor Leopold I. August 7, 1660 Golden Bull (Bulla Aurea) Governmental Decree No.30 / 1952 created
Aerospace Research Centre in Brno University of Technology -goals, organisation and project activities
Aerospace Research Centre in Brno University of Technology -goals, organisation and project activities Prof. Antonin Pistek - Brno University Of Technology, Czech Republic Introduction At the beginning
Dr. Charles Watt. Educational Advancement & Innovation
Dr. Charles Watt Educational Advancement & Innovation 1 21st Century Education What are the critical skills our undergraduate students need? Technical depth in a particular field Creativity and innovation
EPD ENGINEERING PRODUCT DEVELOPMENT
EPD PRODUCT DEVELOPMENT PILLAR OVERVIEW The following chart illustrates the EPD curriculum structure. It depicts the typical sequence of subjects. Each major row indicates a calendar year with columns
Consortium Capabilities
Consortium Capabilities The driver in advanced materials development is to create products with competitive advantages. Products must continuously become faster, lighter and cheaper and must provide additional
Department of Biotechnology Engineering. Department of Electrical and Computer Engineering. Department of Manufacturing and Materials Engineering
KULLIYYAH OF ENGINEERING CONTACT DETAILS Deputy Dean (Postgraduate & Research) Kulliyyah of Engineering, IIUM P.O. Box: 10, 50728 Kuala Lumpur, MALAYSIA T : +60-6196 4494/4511/ 4595 F : +60 6196 4568 W:
Follow this and additional works at:
Marshall University Marshall Digital Scholar Recommendations Faculty Senate 5-11-2015 SR-14-15-44 CC Marshall University Follow this and additional works at: http://mds.marshall.edu/fs_recommendations
Technical services for preparation, support and measure product and process innovation
Technical services for preparation, support and measure product and process innovation METEF 2014 AQM for business innovation If for INNOVATION we mean the process that turns an idea or concept in a potentially
Customized Sensors. OEM Custom-designed Sensors...from the leader in the measurement of mechanical parameters
Customized Sensors OEM Custom-designed Sensors...from the leader in the measurement of mechanical parameters OEM Custom-designed Sensors Caught in a design dilemma? Are you looking for sensing technology
Mechanical Engineering
Mechanical Engineering 1 Mechanical Engineering Degree Awarded Bachelor of Science in Mechanical Engineering Nature of Program Mechanical engineering is one of the largest technical professions with a
CVVOZE Power Laboratories (CVVOZEPowerLab)
CVVOZE Power Laboratories (CVVOZEPowerLab) BRNO, SEPTEMBER 2016 1 Centre for Research and Utilization of Renewable Energy Centre for Research and Utilization of Renewable Energy (CVVOZE) was established
METAV 2016 showcases personalisation in medical technology A batch size of one that s the watchword
PRESS RELEASE Corneliusstraße 4 60325 Frankfurt am Main Telefon +49 69 756081-0 Telefax +49 69 756081-11 E-Mail presse@vdw.de from Sylke Becker Tel. +49 69 756081-33 Telefax +49 69 756081-11 Email s.becker@vdw.de
When testing meets intelligence MECHATRONICS
When testing meets intelligence MECHATRONICS Mechatronics Development and test centre Integrated test environment for mechatronic systems and structures. Mechatronics The combination of mechanics, electronics
COURSE MODULES LEVEL 3.1 & 3.2
COURSE MODULES LEVEL 3.1 & 3.2 6-Month Internship The six-month internship provides students with the opportunity to apply the knowledge acquired in the classroom to work situations, and demonstrate problem
College of Engineering
College of Engineering Experience American Higher Education in the Gulf American University of Sharjah, founded in 1997, is a not-for-profit, independent, coeducational institution of higher education
MECHANICAL ENGINEERING
Kaunas University of Technology Faculty of Mechanical and Mechatronics MASTER STUDY PROGRAMME MECHANICAL ENGINEERING Assoc. Prof. Kęstutis Pilkauskas Faculty of Mechanical and Mechatronics The Faculty
CTE - CIP Course Details Catalog
Status: Open Start Year: 2011 End Year: Group 1 Minimum Carnegie Units: 2.00 Minimum Course Selection: School: 1 ACC: 0 Regional: 0 State Course ID State Course Title Max Carnegie Units Start SY End SY
Engineering Department. Ocean Panel
Mechanical Engineering g Faculty Automotive, Aeronautical & Ocean Engineering Department Ocean Panel innovative. entrepreneurial. global innovative. entrepreneurial. global Ocean Panel Assoc. Prof. Dr
Sparking a New Economy. Canada s Advanced Manufacturing Supercluster
Sparking a New Economy Canada s Advanced Manufacturing Supercluster Canada s Advanced Manufacturing Supercluster Canada's Advanced Manufacturing Supercluster Strategy will leverage Canada s innovation
ABOUT COMPUTER SCIENCE
ABOUT COMPUTER SCIENCE MOST COMMON CS JOB TITLES Computer Programmer Computer System Analyst Software Developers Computer and Information Research 2 COMPUTER PROGRAMMERS What they do: Write programs in
NASA TA-12 Roadmap Review: Manufacturing and Cross Cutting
NASA TA-12 Roadmap Review: Manufacturing and Cross Cutting Dr. Ming C. Leu Keith and Pat Bailey Missouri Distinguished Professor Director, Center for Aerospace Manufacturing Technologies Director, Intelligent
DEVELOPMENT OF THE STU FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN 2012
DEVELOPMENT OF THE STU FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN 2012 The priorities for development in 2012 were as follows: The long-term plan of STU MTF development for the period 2012 2017, along
OPEN HOUSE Fall Marty Wood. Mun Y. Choi. Dean of Engineering. Assistant Dean Undergraduate Education
OPEN HOUSE Fall 2008 Mun Y. Choi Dean of Engineering Marty Wood Assistant Dean Undergraduate Education Did you know... We are living in an exciting time in which HUMANS have Completed the HUMAN Genome
Studying at preparing courses Studying at PC (Russian language 10 months) Study at PC (Russian language, entrance after 1-st of
Cost for foreign students at the Faculty of International Education NTU "KhPI" in 2016/2017 academic year to students enrolled on an individual contract Type of study Cost per 1 year, in $ Studying at
Innovation and Entrepreneurship in Engineering Education. Prof. KC Chan Head Department of Industrial and Systems Engineering
Innovation and Entrepreneurship in Engineering Education Prof. KC Chan Head Department of Industrial and Systems Engineering The T.I.E. Innovation drives technology growth Entrepreneurship consummates
Advanced Design Theories and Technology for Complex Systems (4)
Seminar Advanced Design Theories and Technology for Complex Systems (4) 1. Knowledge-Based Design Environments: Software Development Nov. 6, 19.00pm, 2012 2. Next Generation Design Systems: Knowledge-Based
product design Who is driving the intelligent tools? Emerging and Enabling Technologies in Practice
product design Who is driving the intelligent tools? Emerging and Enabling Technologies in Practice 1 Overview of i4 Product Design Ltd and our role in the Scottish Tech Sector Current state of play of
KPI is one of the oldest and biggest technical universities in Ukraine. It was founded in 1898.
National Technical University of Ukraine Kyiv Polytechnic Institute KPI is one of the oldest and biggest technical universities in Ukraine. It was founded in 1898. OVERVIEW 39 bachelor s, 92 master s,
Research Report. The journal is dedicated to publishing original theoretical and applicative research results and
Scientific Journals Transactions on Automatic Control and Computer Science, Volume 60 (74), Issue 1, 2 http://www.ac.upt.ro/journal/ The history of this Journal of the Politehnica University of Timisoara
B.TECH(MECHANICAL) -SEDA
B.TECH(MECHANICAL) -SEDA PROGRAMME EDUCATIONAL OBJECTIVES: PEO1 PEO2 PEO3 PEO4 PEO5 Will be equipped with sound knowledge of mathematics, science and technology useful to build complex mechanical engineering
Department of Mechanical Engineering
UNDERGRADUATE COURSES Curriculum for the Degree of Bachelor of Science in Mechanical Engineering: General s 6-0-05 6-0-0 6-0-04 6-0-05 6-0-0 6-0-0 5-0-7 5-0-0 5-0-0 5-0-0 5-0-04 6-0-4 6-0-0 6-0-0 6-0-0
Óbuda University Donát Bánki Faculty of Mechanical and Safety Engineering. TRAINING PROGRAM Mechatronic Engineering MSc. Budapest, 01 September 2017.
Óbuda University Donát Bánki Faculty of Mechanical and Safety Engineering TRAINING PROGRAM Mechatronic Engineering MSc Budapest, 01 September 2017. MECHATRONIC ENGINEERING DEGREE PROGRAM CURRICULUM 1.
AUTOMATION & MECHATRONIC SYSTEMS COURSE MODULES
AUTOMATION & MECHATRONIC SYSTEMS COURSE MODULES A bionic arm, a self-driving car and an autopilot train system - these are some icons of the amazing world of automation technology that are brought about
High Value Manufacturing Catapult
High Value Manufacturing Catapult Dr Daniel Thompson Senior Technology Officer @ National Composites Centre HVM Catapult Presentation 11 February 2016 UK Manufacturing the Facts The global manufacturing
IT4Innovations. National Research Center for Computing
IT4Innovations National Research Center for Computing Prof. Ivo Vondrak ivo.vondrak@vsb.cz Partners: VSB Technical University of Ostrava University of Ostrava Silesian University in Opava Academy of Sciences
CONSTRUCTION BEGINS ON $17 MILLION CAREER TECHNOLOGY CENTER
Contact: Joe Verkennes, Director of Marketing, (734) 384-4207 May 4, 2012 FOR IMMEDIATE RELEASE CONSTRUCTION BEGINS ON $17 MILLION CAREER TECHNOLOGY CENTER MONROE, Mich. Construction officially began today
M. Phil. / Pre. Ph. D. New Syllabus Paper Faculty of Science
THE FINAL PROGRAMME SHIVAJI UNIVRSITY, KOLHAPUR Circular No. 401 Exam Final Programme of the M.Phil. / Pre.Ph.D. Examination to held in April/May 014. 1. Students should see their Seat No. and Name in
BUILDING AN EUROPEAN ECOSYSTEM FOR PROTOTYPE MANUFACTURING IN THE AEROSPACE INDUSTRY
BUILDING AN EUROPEAN ECOSYSTEM FOR PROTOTYPE MANUFACTURING IN THE AEROSPACE INDUSTRY APPROACHES ON TECHNOLOGY INTEGRATION Dipl.-Ing. Manuel La Rosa Betancourt M.A. FOUNDER & DIRECTOR 20.09.2016 PI INTEGRAL
MSc Chemical and Petroleum Engineering. MSc. Postgraduate Diploma. Postgraduate Certificate. IChemE. Engineering. July 2014
Faculty of Engineering & Informatics School of Engineering Programme Specification Programme title: MSc Chemical and Petroleum Engineering Academic Year: 2017-18 Degree Awarding Body: University of Bradford
Ph.D : Technology & Science Fellowship available for meritorious Full-Time, candidates GATE / NET qualified Rs.
QS Ranking NAAC Accredited A Emerging Researchers with creative dynamism for promising innovations are invited to join Hindustan, a blossoming Deemed University with a rich heritage and commitment for
House Bill 5 Endorsements. Business and Indusrty. Arts and Humanities Multidisciplinary. Public Service STEM
Business and Indusrty Public Service STEM Arts and Humanities Multidisciplinary Career and Technical Education Courses House Bill 5 Endorsements Subchapter A. Middle School 12700300 Exploring Careers 12700400
FRCSE manufacturing on cutting edge of technology
Fleet Readiness Center Southeast (FRCSE) Mechanical Engineer Julio Williams removes a prototype aircraft part created in the ZCorp Spectrum Z510 machine July 16. The machine uses a computer-aided design
THE DRIVING FORCE BEHIND THE FOURTH INDUSTRIAL REVOLUTION
TECNALIA INDUSTRY AND TRANSPORT INDUSTRY 4.0 THE DRIVING FORCE BEHIND THE FOURTH INDUSTRIAL REVOLUTION www.tecnalia.com INDUSTRY 4.0 A SMART SOLUTION THE DRIVING FORCE BEHINDTHE FOURTH INDUSTRIAL REVOLUTION
ENGINEERING What can I do with this degree?
ENGINEERING What can I do with this degree? ANY DISCIPLINE Production Sales and Marketing Management Consulting Research and Development Teaching Law AEROSPACE Propulsion Fluid Mechanics Thermodynamics
Research Report. Transactions on Automatic Control and Computer Science Volume 61 (75), Issue 1,
SCIENTIFIC JOURNALS Research Report 2016 Transactions on Automatic Control and Computer Science Volume 61 (75), Issue 1, 2016 http://www.ac.upt.ro/journal/ The history of this Journal of the Politehnica
Electronics the hidden sector. Dr Kathryn Walsh Director, Electronics-enabled Products KTN
Electronics the hidden sector Dr Kathryn Walsh Director, Electronics-enabled Products KTN Here to celebrate! The projects The Innovative electronics Manufacturing Research Centre The Industry! Why hidden?
THE BIOMEDICAL ENGINEERING TEACHING & INNOVATION CENTER. at Boston University s College of Engineering
THE BIOMEDICAL ENGINEERING TEACHING & INNOVATION CENTER at Boston University s College of Engineering The vision At Boston University s College of Engineering, we intend to create an exciting new resource
Mechanical Engineering
Mechanical Engineering-1 Undergraduate Bulletin 2018-2019 Mechanical Engineering Faculty: Paliwal, Chair, Facas, Grega, Sepahpour, Shih, Wang, Yan The Department of Mechanical Engineering offers an academic
The role of university science parks in business-university research collaboration
The role of university science parks in business-university research collaboration The Dowling Review: enhancing business-university research collaboration Dr Malcolm Parry OBE, Director and CEO The Surrey
STEM Designated Degree Program List Effective May 10, 2016
STEM Designated Degree Program List Effective May 10, 2016 The STEM Designated Degree Program list is a complete list of fields of study that DHS considers to be science, technology, engineering or mathematics
WORK PACKAGE 4: Resource alliance
RePCI-PROJECT WORK PACKAGE 4: Resource alliance Deliverable D4.3 Report on analyzing of expertise, facilities and related activities Gabriella Vadászné Bognár University of Miskolc 15 th September 2014
MISSISSIPPI POLYMER INSTITUTE: Real World Solutions to Your Technical Challenges
MISSISSIPPI POLYMER INSTITUTE: Real World Solutions to Your Technical Challenges MPI is an ISO/IEC 17025 accredited, full-service resource for polymer and material science-related industries. Established
TESA MICRO-HITE AN ALL-PURPOSE METROLOGY HEIGHT GAUGE CASE STUDY
CASE STUDY TESA MICRO-HITE AN ALL-PURPOSE METROLOGY HEIGHT GAUGE TESA s MICRO-HITE electronic vertical height gauge is widely used for measuring precision parts in workshops or gauge rooms. This battery-powered
The energy and sustainability concentration emphasizes the mechanical aspects of energy conversion and management.
Elective Concentrations The program in Mechanical Engineering is designed to appeal to students with a wide variety of interests and professional goals. By an appropriate choice of elective courses, students
Prof David Shepherd Deputy Vice Chancellor. Bangor University Founded 1884
Prof David Shepherd Deputy Vice Chancellor Bangor University Founded 1884 Location Witty Review 2013 The future growth of the UK economy will in large part come from fast growing SMEs Universities offer
Ergoengineering in dental medicine. Veronica Argesanu 1, Mirella Anghel 2, Cristian Comes 3. Introduction. Anthropometrical workplace design
Ergoengineering in dental medicine Veronica Argesanu 1, Mirella Anghel 2, Cristian Comes 3 Politehnica University of Timisoara Summary Modular mechatronic equipment - based on human centered design - in
Proposer: Peggy Carr, Associate Dean (PO Box , 331 Architecture, Voice: x308, Fax: )
Title: DCP and FA Digital Fabrication Laboratory Enhancement Proposer: Peggy Carr, Associate Dean (PO Box 115701, 331 Architecture, mcarr@ufl.edu, Voice: 392-4836x308, Fax: 392-7266) Sponsoring Organization:
FICCI Suggestions for the R & D Policy of Indian Textiles Sector
FICCI Suggestions for the R & D Policy of Indian Textiles Sector FEDERATION OF INDIAN CHAMBERS Introduction Currently, Indian Textiles sector contributes about 14% to industrial production, 4% to the GDP,
1DayInR&D. An experience of FCA Research & Development activities and labs. Summary
1DayInR&D An experience of FCA Research & Development activities and labs Summary A program of lessons and laboratories introducing the automotive research and development activities to university students.
Prototyping Future Smart City Forms
Combining Sensory Technology and BIM Visualize Environmental Impact Source: Perkins + Will By: Dr. Zaki Mallasi, Assistant Professor, Director of Design Computation Lab, Effat University, Saudi Arabia
26-27 October Robots, Industrialization and Industrial Policy. Paper submitted by. Jorge MAYER Senior Economic Affairs Officer UNCTAD
Multi-year Expert Meeting on Enhancing the Enabling Economic Environment at all Levels in Support of Inclusive and Sustainable Development, and the Promotion of Economic Integration and Cooperation 26-27
SUMMARY OF PHD. THESIS
FACULTY OF MACHINE BUILDING Eng. Sever-Adrian Radu SUMMARY OF PHD. THESIS Theoretical and experimental researches regarding the vacuum casting of the non-metallic complex parts PhD. Supervisor Prof. Dr.
T.C. MARMARA UNIVERSITY FACULTY of ENGINEERING COMPUTER ENGINEERING DEPARTMENT
T.C. MARMARA UNIVERSITY FACULTY of ENGINEERING COMPUTER ENGINEERING DEPARTMENT CSE497 Engineering Project Project Specification Document INTELLIGENT WALL CONSTRUCTION BY MEANS OF A ROBOTIC ARM Group Members
EPD ENGINEERING PRODUCT DEVELOPMENT
EPD PRODUCT DEVELOPMENT PILLAR OVERVIEW The following chart illustrates the EPD curriculum structure. It depicts the typical sequence of subjects. Each major row indicates a calendar year with columns
Virtual Institute Laboratory of the. VisionOnline Project.
CIRP WG: Virtual Research Laboratories Virtual Institute Laboratory of the VisionOnline Project Swavik A. Spiewak University of Calgary, Canada Depart. of Mechanical and Manufacturing Engg http://www.enme.ucalgary.ca/~spiewaks
BS in. Electrical Engineering
BS in Electrical Engineering Program Objectives Habib University s Electrical Engineering program is designed to impart rigorous technical knowledge, combined with hands-on experiential learning and a
AN ISO 9001:2008 CERTIFIED COMPANY
AN ISO 9001:2008 CERTIFIED COMPANY INTRODUCTION BACKGROUND Based in the Pune (Bhosari MIDC,Maharashtra) Elite Sheet Metal Works is ideally situated to provide a nationwide service. With a highly experienced
Risk Center Workshop Autonomous Decision-Making: Assessing the Technology and its Impact on Industry and Society
Risk Center Workshop Autonomous Decision-Making: Assessing the Technology and its Impact on Industry and Society Wednesday, 25 October 2017, 8.30 16.30 Swiss Re Centre for Global Dialogue, Rüschlikon Registration:
THE BEST EDUCATION. The tools that will guide you on your way
THE BEST EDUCATION The tools that will guide you on your way By studying ITAM s undergraduate program in Mechatronics Engineering, you will become a professional with a comprehensive practical and multidisciplinary
Human Centered Production in Cyber- Physical Production Systems. Case study Croatia
Human Centered Production in Cyber- Physical Production Systems Case study Croatia Prof. Ivica Veža Faculty of Electrical Engineering, Mechnical Engineering and Naval Architecture FESB, University of Split,
JOMO KENYATTA UNIVERSITY OF AGRICULTURE AND TECHNOLOGY COLLEGE OF ENGINEERING AND TECHNOLOGY (COETEC)
JOMO KENYATTA UNIVERSITY OF AGRICULTURE AND TECHNOLOGY COLLEGE OF ENGINEERING AND TECHNOLOGY (COETEC) SELF-SPONSORED DEGREE PROGRAMMES IN ENGINEERING SEPTEMBER 2019 INTAKE Jomo Kenyatta University of Agriculture
5/28/2015. Sharif University of Technology. Session # 20. Instructor. Class time. Course evaluation. Department of Industrial Engineering
Advanced Manufacturing Laboratory Department of Industrial Engineering Sharif University of Technology Session # 20 Instructor Omid Fatahi Valilai, Ph.D. Industrial Engineering Department, Sharif University
How industry can leverage CSIR platforms for innovation. Industry Associations Innovation Day May 2018 Kobus Roux
How industry can leverage CSIR platforms for innovation Industry Associations Innovation Day 2018 24 May 2018 Kobus Roux 1 Contextual considerations Human capital National: Need for job creation against
RESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA
RESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA 2010 Number 28 INFLUENCE OF CUTTING MEDIUM ON DEFORMATION OF THIN RIBS Jozef PETERKA,
OSMANIA UNIVERSITY No.15 /BE/Exams/TT TIME-TABLE
No.15 /BE/Exams/TT2012 05-04-2013 TIME-TABLE B.E. I/IV (REGULAR) (Main) EXAMINATIONS: MAY/JUNE, 2013 Time: 10.00 a.m. to 1.00 p.m. Subject 04-06-2013 11-0-2013 15-06-2013 20-06-2013 24-06-2013 26-06-2013
MECHANICAL ENGINEERING AND DESIGN 2017/18 SEMESTER 1 MODULES
Visual Communications ENG_4_542 Tuesday and Wednesday 2pm 4pm (Tues), 9.30am 11.30am (Weds) Students attend both sessions. The module aims a) to develop the capacities of observation and visualisation,
Course and Entry Requirements For Nitec Graduates
Applicable to Nitec graduates attaining the following ITE qualifications: - Nitec in Electro-Mechanical Servicing - Nitec in Mechatronics - Nitec in Mechatronics (Automation Technology) - Nitec in Mechatronics
Cranfield University. At a Glance
Cranfield University At a Glance Creating leaders in technology and management We unlock the potential of people and organisations by partnering with business and governments to deliver transformational
06 March Day Date All Streams. Thursday 03 May 2018 Engineering Mathematics II. Saturday 05 May 2018 Engineering Physics
/ SCHOOL OF TECHNOLOGY MANAGEMENT &ENGINEERING FINAL EXAMINATION TIME TABLE (ACADEMIC YEAR: 2017 18) MASTER OF BUSINESS ADMINISTRATION IN TECHNOLOGY MANAGEMENT (2017-22) YEAR: I, SEMESTER: II CAMPUS: MUMBAI,
Structural Analysis Control System Engineering Cim Elective I Computer Graphics for Cad/Cam. Advanced in Operating System Design
Sr No Name of Branch RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY **** MTECH,ME,MDES, MARCH FIRST SEMESTER EXAMINATION OF summer 2015 # PROGRAMME( WRITTEN ) # MTech,ME,MDes,MArch FIREST SEMESTERsummer
FSE UNIZA Faculty of Security Engineering University of Zilina
FSE UNIZA Faculty of Security Engineering University of Zilina www.fbi.uniza.sk University of Zilina The origin of the today s University of Zilina goes back to 1953 in Prague. It was established as the
Intelligent Infrastructures Systems for Sustainable Urban Environment
ANALELE UNIVERSITĂłII EFTIMIE MURGU REŞIłA ANUL XV, NR. 1, 2008, ISSN 1453-7397 Daniel Amariei, Gilbert Rainer Gillich, Dan Baclesanu, Theodoros Loutas, Constantinos Angelis Intelligent Infrastructures
INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 05 MELBOURNE, AUGUST 15-18, 2005 AUTOMATIC DESIGN OF A PRESS BRAKE FOR SHEET METAL BENDING
INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 05 MELBOURNE, AUGUST 15-18, 2005 AUTOMATIC DESIGN OF A PRESS BRAKE FOR SHEET METAL BENDING Giorgio Colombo, Ambrogio Girotti, Edoardo Rovida Keywords:
My Company. Simply Safe.
More inside. All from a single source. In order to offer tailor-made services regionally and internationally, we have organized the TÜV AUSTRIA Group into four business areas: Industry & Energy Infrastructure
Designing for Tube Laser STEEL SERVICE CENTRE LASER CUTTING WHITEPAPER
WHITEPAPER Designing for Tube Laser SSC is a UK specialist in laser cutting for manufacturing and production. Additional services include press braking, laser scanning, CAD/CAM draughting and many other
Canadian Technology Accreditation Criteria (CTAC) ELECTROMECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC)
Canadian Technology Accreditation Criteria (CTAC) ELECTROMECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) Preamble These CTAC are applicable to programs having titles
Programme Specifications B. Tech. Programme Programme: Mechanical Engineering Department: Mechanical and Manufacturing Engineering
Programme Specifications B. Tech. Programme Programme: Mechanical Department: Mechanical and Manufacturing Faculty of & Technology M. S. Ramaiah University of Applied Sciences University House, New BEL
Intelligent Sensor Platforms for Remotely Piloted and Unmanned Vehicles. Dr. Nick Krouglicof 14 June 2012
Intelligent Sensor Platforms for Remotely Piloted and Unmanned Vehicles Dr. Nick Krouglicof 14 June 2012 Project Overview Project Duration September 1, 2010 to June 30, 2016 Primary objective(s) / outcomes
CATALOGUE. HBRP Publication
CATALOGUE HBRP Publication ARCHITECTURE Journal of Housing and Advancement in Interior Designing Є Housing Science and Management Є Computer Techniques in Architectural Design Є Construction Industry and