LUMELEX SERIES 0/2V LED XTM 1MM Elegant fixed downlight designed specifically for the most demanding architecture applications. Designed for the Xicato XTM 1mm LED module up to 2 Watts Extremely tight color consistency (less than 2 MacAdam Ellipses) System efficiency up to 0 lumens/watt Backed by Xicato s Five Year Color Consistency and Lumen Maintenance Warranty 0,000 hour life to 0% lumen output, L0 at F max ambient Choice of color temperature Color Rendering Index (CRI) of either (high) or (standard) Color Fidelity (Rf) (high) or (standard) Gamut Area Index (Rg) (high) or 1 (standard) Choice of lumen outputs (delivered lumens) Tested to LM and LM0 Protocols, TM-0 available Hidden integral electronic driver compatible with reverse phase (ELV compatible) dimmers down to % Field interchangeable optics (1-0 ) modify the beam spread distribution Integral black polycarbonate accessory cartridge accepts up to two size-aa LSI filters and accessories Integral dimmer available Finishes: LSI Black, White, and Silver Fixture weight: lbs All modules are field replaceable Fixed center stem MOUNTING OPTIONS Please review the ORDERING INFORMATION section on the next page on how to specify the following: LED Module LED Rating Color Temperature Optic - mm/ beam spead Dimming Voltage Finish LX-XXXXX-XXXXXX-A-XXXXXX Canopy for permanent mounting on standard octagonal junction boxes. LX-XXXXX-XXXXXX-00-XXXXXX Lexan fitting for 1 and 2 circuit LSI track. With On/Off switch. LX-XXXXX-XXXXXX-0E-EDXXXX Lexan fitting with integral dimmer (for use with ED dimming driver %). LX-XXXXX-XXXXXX-LT-LTXXXX Lexan fitting with LumenTalk dimmer (for use with LT dimming driver (<1%). 1/2 1mm Other Options (Consult Factory): Custom Stems, specify length ( - ) Custom color, RAL palette Security/Worklite Fixture, add suffix EF00 (track) mounting option only. 0/1 www.lightingservicesinc.com
ORDERING INFORMATION Xicato XTM 1mm Fixture 1. Choose the desired LED Module (T1) for XTM (1mm) 1/2 1mm 2. Choose the numeric code to designate the desired LED Rating Lumens/CRI/Wattage (-) for 00// (-) for 00// (-) for 00// (-) for 00//1 (1-) for 100//2 (-) for 00//2 (-) for 00//2 (2-) for 0//2 (2-) for 0//2 mm 1/2 mm. Choose the numeric code to designate the desired Color Temperature (2) for 0K (0) for 000K () for 00K (0) for 000K For other CCT, consult factory. Use the following alpha-numeric code to designate the Optic (S1) for 0mm/1 (WR) for 0mm/ (Field Reducer) (M2) for 0mm/ (Narrow Field Angle) (M) for 0mm/ (Wide Field Angle) (M) for 0mm/ (Narrow Field Angle) (M) for 0mm/0 (Wide Field Angle) (M) for 0mm/0. Select your Mounting Option (00) Track Fitting (0E) Track Fitting with Integral Dimmer (LT) Lumentalk Fitting (A) Canopy Fitting 1/ mm. Choose the letter code for Dimming Type: (TE) Trailing Edge (Reverse Phase) (%) (ED) Integral Dimming (%) (0E & A fitting only) (LT) Lumentalk (<1%) (LT fitting only) () 0-V (%) (A fitting only). Choose the desired Voltage: (0) for 0V () for 0-V (2) for 2V. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX - T1-2 S1-00 - TE 0 B FIXTURE LED MODULE LED RATING COLOR TEMP OPTIC FITTING DIMMING VOLTAGE FINISH. Don t forget your Accessories! Color Temperature & Center Point Tolerance Color Temp Center Point Tolerance 0K 0K +/- 0K 000K K +/- 0K 00K K +/- 0K 000K 000K +/- 0K Chromaticity Specifications Rg- Gamut LED Ra- CRI Rf- Fidelity Area T1-TS - 1 T1-TS - ACCESSORIES LX-S1-REF-B (0mm/1 ) LX-WRD-REF-CLR (0mm/ ) LX-M-REF-B (0mm/ ) LX-M0-REF-CLR (0mm/ ) LX-M0-REF-B (0mm/ ) LX-M0-REF-CLR (0mm/0 ) LX-M0-REF-CLR (0mm/0 ) ANG Hood 2IN AA Hood 2IN AA Glass Color Filters AA Color and Spread Gels AA Backer Ring AAB Louver Hex AA Beam Softener AA Lighting Blocking Screens AA01S, AA02S, AA0S Spread Lenses AA0, AA2, AA, AA www.lightingservicesinc.com Solid State 0/1
LUMELEX SERIES XICATO XTM 1MM PERFORMANCE The performance characteristics of the LumeLEX family of products can be customized based on the LED module and the optic (reflector) selected. Each available LED module is defined by four characteristics the color rendering index (CRI), the correlated color temperature (CCT), the power that it uses (watts), and its available lumens. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. In the LSI part number, the LED module is specified with a number that immediately follow the product series number. For example, in the part number LX-T0-2M2-00-TE0B, the T0-2 represents an LED module with an output of 00 lumens, a CRI of, a power usage of watts and a color temperature of 0K. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the M2 in LX-T0-2M2-00-TE0B is a 0mm diameter optic that has a -Degree beam with a narrow field. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power LED Module Optic (Reflector) Lumens/CRI/Wattage S1 M2 WR M M M M 00// 2,0, 2,0 2,10 0 1,0,000 00// 2,0, 2,0 2,10 0 1,0,000 00//1,1,21,2 2, 1,2 1,2,00 00//,1,21,2 2, 1,2 1,2,00 100//2,1,,2,2 1, 2,,00 00//2,0,0,0,0 1,0 2,0,000 00//2,0,0,0,0 1,0 2,0,000 0//1,01,21,2,0 2,2,0,00 0//2,,2,2, 2,,,0 Delivered Lumens LED Module Optic (Reflector) Lumens/CRI/Wattage S1 M2 WR M M M M 00// 0 0 0 0 0 00// 0 0 0 0 0 00//1 0 0 2 1,0 1,0 00// 0 0 2 1,0 1,0 100//2 02 1,0 1,2 1, 1, 00//2 0 0 1,10 1,0 1,0 1,0 00//2 0 0 1,10 1,0 1,0 1,0 0//1 0 1, 1, 1,0 1,0 0//2 1,0 1, 1, 2,21 2,21 Efficiency = Lumens Per Watt LED Module Optic (Reflector) Lumens/CRI/Wattage S1 M2 WR M M M M 00// 2 00// 2 0 1 00//1 2 1 0 2 2 2 00// 2 100//2 2 1 1 00//2 2 1 0 2 2 00//2 2 1 0 2 2 0//1 2 0 0 0 0//2 2 Absolute range of values are +/- % of typical value, and are for all color temperatures LED Module Lumens/CRI/Wattage 00// 00// 00//1 00// 100//2 00//2 00//2 0//2 0//2 Letter Code - - - - 1- - - 2-2- Nominal Fixture Power (+/- %), Watts 1 2 2 2 2 2 Maximum Inrush Current, Amps Minimum Power Factor 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-0. 0/1 www.lightingservicesinc.com
LUMELEX SERIES XICATO XTM 1MM OPTICS 2 1/ (mm) 2 1/1 (2mm) LX-S1-REF-B (S1) (0mm/1 ) Anti-reflective coated aspheric lens. Tool-less, twist and lock installation. Black finish. 1 1/1 (2mm) 2 / (0mm) LX-M0-REF-B (M) (0mm/ ) (Narrow Field Angle) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. Black finish. 1 / (2mm) 2 / (0mm) LX-M-REF-B (M2) (0mm/ ) (Narrow Field Angle) Computer designed polycarbonate lens. Tool-less, twist and lock installation. Black finish. 1 / (2mm) 2 / (0mm) LX-M0-REF-CLR (M) (0mm/0 ) (Wide Field Angle) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. Clear finish. 1 / (2mm) 2 / (0mm) LX-M0-REF-CLR (M) (0mm/ ) (Wide Field Angle) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. Clear finish. 1 / (2mm) 2 / (0mm) LX-M0-REF-CLR (M) (0mm/0 ) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. Clear finish. 2 (2mm) LX-WRD-REF-CLR (WR) (0mm/ ) Field reducer. Proprietary field reducing baffle. Clear finish. 2 / (0mm) www.lightingservicesinc.com Solid State 0/1
LUMELEX SERIES XICATO XTM 1MM PHOTOMETRIC DATA LED RATING: - S1-0mm DIA Optic Beam Spread (minimum) 1 Center Beam Candlepower CRI M2-0mm DIA Optic Center Beam Candlepower 2 CRI WR- 0mm DIA Optic (FR: Field Reducer) Center Beam Candlepower 2 CRI M- 0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower CRI M- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower CRI M- 0mm DIA Optic (WFA: Wide Field Angle) Beam Spread (minimum) 0 Center Beam Candlepower CRI M- 0mm DIA Optic (WFA: Wide Field Angle) Center Beam Candlepower CRI LED RATING: - S1-0mm DIA Optic Beam Spread (minimum) 1 Center Beam Candlepower CRI M2-0mm DIA Optic Center Beam Candlepower CRI WR- 0mm DIA Optic (FR: Field Reducer) Center Beam Candlepower 0 CRI M- 0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower CRI M- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower 1 CRI M- 0mm DIA Optic (WFA: Wide Field Angle) Beam Spread (minimum) 0 Center Beam Candlepower 2 CRI M- 0mm DIA Optic (WFA: Wide Field Angle) Center Beam Candlepower 0 CRI LED RATING: - M (0 ) 2 2 2 2 21 1 2 2 2 All Max. Footcandles at 0 Beam Axis LED RATING: - All Max. Footcandles at 0 Beam Axis M (0 ) 1 0 1 1 2 2 1 M (0 ) WFA 2 2 0 0 2 1 1 M (0 ) WFA 2 1 2 1 2 0 0 2 21 1 1 M ( ) 2 1 0 2 2 1 1 M WFA 2 1 0 1 2 2 2 1 1 WR FR 2 0 0 2 0 1 0 2 2 1 1 M2 2 2 0 2 1 1 1 All Distances in Feet 2 0 2 Photometric Data based on LED Rating: - (00 Lumens/CRI/watts) *WFA Optics not represented in graph M ( ) 2 0 1 0 0 0 2 2 1 1 1 M WFA 0 10 21 1 0 0 2 1 2 2 21 1 1 1 WR FR 0 1 2 1 0 1 2 2 1 1 1 M2 2 0 2 1 2 2 2 1 1 1 S1 (1 ) 1 2 1 2 1 1 1 S1 (1 ) 10 0 1 0 2 2 1 1 All Distances in Feet 2 0 2 1 2 1 1 1 1 1 21 2 2 2 1 2 1 1 1 1 1 21 2 2 2 Photometric Data based on LED Rating: - (00 Lumens/CRI/2watts) *WFA Optics not represented in graph 0/1 www.lightingservicesinc.com
LUMELEX SERIES ENERGY STAR Below are the LumeLEX fixture combinations that are Energy Star certified. LED Rating LED Module Lumens/CRI/Wattage Color Temp Optic mm/angle Fitting Dimming X T1 X 1- X 2 X M X 2G X ED XTM (1mm) 100//2 0K 0mm/0 Universal Fitting Integral (%) (0E & A fitting only) X 2- X 0 X M X G X 0//2 000K 0mm/0 WFA Pipe Clamp 0-V (%) (A fitting only) X X X M X A 00K 0mm/ WFA LSI Canopy 0 X 0E 000K X LSI Track Fitting (ED Dimming Only) EF 00 Emergency Fitting www.lightingservicesinc.com Solid State 0/1
LUMELEX ACCESSORIES HOOD 2IN AA 2 inch deep hood 1 LIGHT BLOCKING SCREENS AA Stainless steel mesh screens used alone or in combinations will block from approximately % to 0% of the transmitted light without changing color temperature of the light No. % of Light Blocked AA01S AA02S 0 AA0S 0 ANG HOOD 2IN AA 2 inch deep angled hood BACKER RING AA Stainless steel ring to hold gel when no other size AA accessories is being used. SPREAD LENSES AND BEAM SOFTENER No. Description % of Light Transmission 0 Spread Lens/Clear ( X 0 ) 2 Spread Lens/Clear ( X 0 ) Spread Lens/Clear (0 X 0 ) Spread Lens/Clear ( X 0 ) Beam Softener/Clear 0 ( X ) LOUVER HEX AA 1/ thick Hexcell black metal louver used for thin profile. 1. Figures vary based upon LED Module/Optic being used and relationship of screen(s) to LED Module/Optic and to each other. 0/1 www.lightingservicesinc.com
LUMELEX SERIES GELS As the foremost innovator in accent lighting, LSI offers a complete range of pre-cut Gels to modify the spread and color of light for the LumeLEX LED Series. LumeLEX SPREAD GELS Size: AA ( mm diameter) Spread Gel GEL-L1-AA GEL-L-AA GEL-L-AA GEL-L-AA GEL-L0-AA GEL-L0-AA GEL-L0-AA GEL-L0-AA GEL-L0B-AA GEL-L0B2-AA GEL-L0B1-AA GEL-L0B-AA GEL-LB-AA GEL-L0B0-AA GEL-R1-AA 1 Spread Gel Spread Gel Spread Gel Spread Gel 0 Spread Gel 0 Spread Gel 0 Spread Gel 0 Spread Gel 0 by Spread Gel 0 by 0.2 Spread Gel 0 by 1 Spread Gel 0 by Spread Gel by Spread Gel 0 by 0 Spread Gel Beam Softener LumeLEX COLOR GELS Size: AA ( mm diameter) Gel Color Size: AA ( mm diameter) Gel Color GEL-R2-AA GEL-R-AA GEL-R-AA GEL-R-AA GEL-R-AA GEL-R21-AA GEL-R2-AA GEL-R2-AA GEL-R2-AA GEL-R-AA GEL-R2-AA GEL-R1-AA GEL-R2-AA GEL-R1-AA GEL-R-AA GEL-R-AA GEL-R1-AA GEL-R-AA GEL-R-AA GEL-R1-AA GEL-R0-AA Bastard Amber Pale Yellow Straw Straw Tint Medium Straw Golden Amber Orange Red Light Red Medium Red Lavender Booster Blue Sea Blue Azure Blue Primary Green Light Grey Medium Grey Light Frost Tough Silk Light Hamburg Frost Blue Diffusion Rose Gold GEL-R-AA Canary GEL-R-AA Half Blue GEL-R1-AA Shell Pink GEL-R-AA Sapphire Blue GEL-R-AA Pale Grey GEL-R01-AA Storaro Red GEL-R0-AA Storaro Green GEL-R0-AA Storaro Violet GEL-R2-AA Full Blue GEL-R-AA Third Blue GEL-R21-AA Eighth Blue (Boosts 0K to 00K) GEL-R1-AA Tough 1/ Minusgreen GEL-R-AA Roscosun (1/ CTO) (Reduces 00K to 00K) GEL-R1-AA Full Straw (CTS) GEL-R-AA Quarter Straw (CTS) GEL-R0-AA CalColor 0 Cyan GEL-R1-AA CalColor 1 Green GEL-R0-AA CalColor 0 Green GEL-R0-AA CalColor 0 Pink GEL-R0-AA CalColor 0 Pink GEL-R0-AA CalColor 0 Lavender * Backer Ring AAB required to hold gels when no other rimmed AA accesories are used. www.lightingservicesinc.com Solid State 0/1
COLOR MEDIA COLOR FILTERS As the foremost innovator in accent lighting, LSI offers a complete range of permanent fade-free glass color filters, which are available in nine stock diameters. All glass color filters are rimmed in a seamless aluminum ring and are slotted for heat expansion. Size Diameter LSI Fixture Series AAA 2 / LumeLEX /0/1/, SSLCX1, SSLGR1, LumeLEX MAR-S AA LumeLEX 2 (with LX2-Holder or LX2-Barndoor), LumeLEX 2, LumeLEX, LumeLEX, A 1/2 LumeLEX 0, SSL, SSLCX0, SSLGR0CL, SSLGR, B 1/ LumeLEX MAR-L C / LumeLEX, LumeLEX, SSL2, SSLCX, SSLCX, SSLGRCL Special Glass Color Filters LSI will fabricate, on special order, glass color filters in most sizes and shapes. FS Color Filter Samples To facilitate selection of glass color filters, LSI supplies a complete set of 1 / X 1 / labeled glass and dichroic samples in a handy carrying case. 1 % of Light No. Color Transmission 02 Medium Pink 0 Deep Pink 0 Flesh Pink 0 Pale Lavender 0 Surprise Pink 1 0 Lilac 21 Warm Red Strawberry Ruby Magenta 1 Light Amethyst 2 1 Medium Amethyst 1 1 Deep Amethyst 1 Olive 1 1 Light Green Medium Green 2 21 Deep Green Silver green 2 Yellow Green 2 Emerald Green 2 Light Turquoise 2 Medium Turquoise 0 2 Deep Turquoise 1 2 Light Blue 0 Medium Blue 2 Daylight Gene Moore Blue 1 Grey Light Blue Green 1 Light Amber 0 Medium Amber 1 Deep Amber 2 Straw Gold Canary Yellow Lemon 1 Pumpkin 2 Tangerine Orange 2 Pink Gold 0 Bronze 1 Brass 2 Autumn Tan Leaf Brown 1 Butter Pecan Toasted Almond 1 Notes: 1. Values given are approximate due to slight variations in glass color and thickness. 0/1 www.lightingservicesinc.com
COLOR MEDIA DICHROIC COLOR FILTERS In addition to our complete line of glass color filters, LSI now offers dichroic glass color filters that achieve purer, more saturated, richer color by selective wavelength transmission. Since these filters reflect rather than absorb the unwanted color wavelengths, a higher intensity of colored light can be obtained with fewer or lower wattage fixtures. In addition, this selective transmission allows for very accurate color matching from filter to filter. All standard LSI filter sizes are available in a wide palette of well chosen dichroic colors that can be used with all LSI fixtures that accept accessories. LSI dichroic glass color filters have the added benefit of being rimmed for extra durability to allow for frequent usage without fear of breakage or edge chipping. Size Diameter LSI Fixture Series AAA 2 / LumeLEX /0/1/, SSLCX1, SSLGR1, LumeLEX MAR-S AA LumeLEX 2 (with LX2-Holder or LX2-Barndoor), LumeLEX 2, LumeLEX, LumeLEX, A 1/2 LumeLEX 0, SSL, SSLCX0, SSLGR0CL, SSLGR, B 1/ LumeLEX MAR-L C / LumeLEX, LumeLEX, SSL2, SSLCX, SSLCX, SSLGRCL Special Glass Color Filters LSI will fabricate, on special order, dichroic glass color filters in most sizes and shapes not exceeding a diameter circle overall. FS Color Filter Samples To facilitate selection of glass color filters, LSI supplies a complete set of 1 / X 1 / labeled glass and dichroic samples in a handy carrying case. Technical Data Dichroic color filters are created in a vacuum chamber by multi-layer vapor deposits of different minerals onto low expansion, chemically resistant Borosilicate glass. Deposits are made in alternating layers of varying microscopic thickness which allow very narrow color wavelengths to be selectively transmitted and all other wavelengths to be reflected. LSI does not recommend using dichroic color filters with lamps or fixtures that have beam spreads greater than 0 because a secondary color aura is created by the wide angular transmitted wavelengths that are different than the desired color wavelength. Since there is mainly transmission and reflection of the color wavelengths by the dichroic filter and very little absorption, the dichroic filter can be used with many high temperature lights that normally would not accept color filters. % of Light No. Color Transmission 01 Light Pink 02 Medium Pink 0 Hot Pink 0 Pale Pink Deep Magenta 2 Lavender 2 Vivid Magenta 1 Lavender Accent Lilac 1 Purple Fusion Sky Blue 21 Sea Blue Cyan 2 Light Blue Green 0 2 Primary Blue 2 2 Medium Red Blue 1 2 Deep Purple 1 2 Peacock Blue 2 Mediterranean Blue 2 Boost Blue 1 0 Light Yellow Green 1 Fern Green 2 Turquoise Primary Green 1 Industrial Green 0 Yellow 0 1 Amber 1 2 Amber Blush Bastard Amber 1 Goldenrod Bright Straw 0 Medium Orange 1 1 Orange 0 Flame Red 2 1 Primary Red 2 www.lightingservicesinc.com Solid State 0/1