LUMELEX 2044 SERIES 120/277V LUMENETIX 19MM CONTROL

Transcription

1 LUMELEX 0 SERIES 10/V LUMENETIX 1MM CONTROL Elegant fixture designed specifically for the most demanding architecture applications. Designed for the Lumenetix Arraya Color Tuning LED module up to 0 Watts Extremely tight color consistency (less than MacAdam Ellipses, ± 0.00 DUV) System efficiency up to lumens/watt On board closed loop feedback compensates each channel for thermal and optical depreciation. 0,000 hour life to 0% lumen output, L0 at F max ambient Tunable white from 10K to 000K Full color tuning and gradients of saturated colors Color Rendering Index (CRI) of 0+ from 000K to 000K 1000 produced lumens Tested to LM and LM0 Protocols Choice of dimming down to 1%. Compatible with zones for 0-10V 0-10V with the ability to control intensity and CCT simultaneously Compatible with DMX, RDM, and Bluetooth via IOS app Uses the following four DMX channels: Dimming, CCT, Saturation, and Hue Field interchangeable optics (1-0 ) modify the beam spread distribution Accessory holder accepts up to two size-aa LSI filters and accessories Finishes: LSI Black, White, and Silver Fixture weight:. lbs All modules are field replaceable FIXTURE PART NUMBERS Please review the ORDERING INFORMATION section on the next page as well as the MOUNTING OPTIONS on page to create a part number for each fixture that specifies the following: LED Module LED Rating Color Temperature Optic (mm/beam spread) Fitting (Mounting Option) Dimming Voltage Finish PART NUMBER LX0 DIMMING FITTING OPTIC COLOR TEMP LED RATING LED MODULE FINISH VOLTAGE Example Part Number: LX0-L110-0DWM-CT1-DX10W is a fixture with a Lumenetix 1mm LED module, 1000 Lumen/0 CRI/0 Watt LED rating, Dynamic White ( K) Color Temperature, 0mm 0 Optic, CT1 CONTROLTrack fitting with DMX Address knobs and DMX compatible control gear, 10V and a White finish. 01/1 LumeLEX 1

2 LUMELEX 0 SERIES 10/V LUMENETIX 1MM CONTROL /1 mm (Stem only) LUMENETIX ORDERING INFORMATION Base Fixture Model LX0-L1 LED Rating (Lumens/CRI/Wattage) 10-0 = 1000/0/0 Color Temperature DW= Dynamic White K CO= Full Color and Dynamic White K 10 1/ 0mm Optic S1 = 0mm/1 M = 0mm/ 0 M = 0mm/ M = 0mm/ 0 M = 0mm/ 0 Wide Field Angle M = 0mm/ 0 Wide Field Angle /1 DIA 10mm Fitting/Controls (Dimming) CT1-10 = CONTROLTrack Fitting & 0-10V (1%) CT1-DX = CONTROLTrack Fitting & DMX (<1%) 00-BT = Track Fitting & Bluetooth-IOS App (1%) G-BT = Universal Fitting & Bluetooth-IOS App (1%) G-BT = Pipe Clamp Fitting & Bluetooth-IOS App (1%) A-10 = Canopy Fitting & 0-10V (1%) A-DX = Canopy Fitting & DMX (<1%) A-BT = Canopy Fitting & Bluetooth IOS App (1%) Voltage 10 = 10V 0 = 0-0V = V Finish B = Black W = White S = Silver Example Part Number: LX0-L DW M CT1-DX 10 W FIXTURE MODEL LED COLOR OPTIC FITTING/ VOLTAGE FINISH RATING TEMP DIMMING Other Options (Consult Factory): Custom Stems, specify length ( - ) Custom color, RAL palette 01/1 LumeLEX

3 LUMELEX 0 LUMENETIX 1MM MOUNTING OPTIONS CONTROL FITTING SIDE VIEW STEM LENGTH VIEW CT1 CONTROLTrack Fitting /" 1mm 10 /1" mm /1" mm " 1mm 1/1" 01mm 00 Track Fitting/ EF Security/Worklight Fitting /" 1mm /1" 10mm /" mm 1/1" 101mm G Universal Fitting /1" 1mm 1/1" 01mm /1" 10mm 1" Pipe " Pipe /" 11mm G Pipe Clamp Fitting 1/" 1mm 1/1" 01mm /1" 10mm " mm A Canopy Fitting /1" mm CEILING CEILING 1/1" 01mm " 1mm /1" 10mm 01/1 LumeLEX

4 LUMELEX 0 LUMENETIX 1MM PERFORMANCE The performance characteristics of the LumeLEX family of products can be customized based on the LED module and the optic (reflector) selected. Each available LED module is defined by four characteristics module type (dynamic white vs full color), control type (0-10V, DMX, Bluetooth), the power that it uses (watts), and its available lumens. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LX0-L110-0COM-CT1-DX10B, the 10-0CO represents a 1mm Lumenetix module with an output of 1000 Lumens, a minimum CRI of 0, with full color tuning and power usage of 0 Watts. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the M in LX0-L110-0COM-CT1-DX10B is a 0mm diameter optic that has a 0-Degree beam with a narrow field. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power LED Module Optic (Reflector) Lumens/CRI/Wattage S1 M M M M M 1000/0/,00,01,01 1,00 1,, Delivered Lumens LED Module Optic (Reflector) Lumens/CRI/Wattage S1 M M M M M 1000/0/ 0 0 Efficiency = Lumens Per Watt LED Module Absolute range of values are +/- 10% of typical value, and are for all color temperatures LED Module Lumens/CRI/Wattage 1000/0/ Letter Code 10-0 Nominal Fixture Power (+/- 0%), Watts Maximum Inrush Current, Amps 10 Minimum Power Factor 0. Optic (Reflector) Lumens/CRI/Wattage S1 M M M M M 1000/0/ Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS /1 LumeLEX

5 LUMELEX 0 LUMENETIX 1MM OPTICS 1/ (mm) 1/1 (mm) LX-S1-REF-B (S1) (0mm/1 ) Anti-reflective coated aspheric lens. Tool-less, twist and lock installation. Black Finish. 1 / (mm) / (0mm) LX-M0-REF-B (M) (0mm/0 ) (Narrow Field Angle) Computer designed polycarbonate lens. Tool-less, twist and lock installation. Black finish. 1 1/1 (mm) / (0mm) LX-M0-REF-B (M) (0mm/ ) (Narrow Field Angle) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. Black finish. 1 / (mm) / (0mm) LX-M0-REF-CLR (M) (0mm/0 ) (Wide Field Angle) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. Aluminized finish. 1 / (mm) / (0mm) LX-M0-REF-CLR (M) (0mm/0 ) (Wide Field Angle) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. Aluminized finish. 1 / (mm) / (0mm) LX-M0-REF-CLR (M) (0mm/0 ) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. Aluminized finish. 01/1 LumeLEX

6 LUMELEX 0 XICATO 1MM MOUNTING OPTIONS LED RATING: 10-0 S1-0mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) 1 Center Beam Candlepower 00 M-0mm DIA Optic (FR: Field Reducer) Beam Spread (minimum) 0 Center Beam Candlepower 01 M- 0mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) 0 Center Beam Candlepower M- 0mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) Center Beam Candlepower 01 M- 0mm DIA Optic (WFA: Wide Field Angle) Beam Spread (minimum) 0 Center Beam Candlepower 1 M- 0mm DIA Optic (WFA: Wide Field Angle) Beam Spread (minimum) 0 Center Beam Candlepower 100 LED RATING: 10-0 M (0 ) NFA All Max. Footcandles at 0 Beam Axis M (0 ) WFA M ( ) NFA M (0 ) WFA M (0 ) NFA S1 (1 ) NFA All Distances in Feet Photometric Data based on LED Rating: 10-0 (1000 Lumens/0CRI/0watts) *WFA Optics not represented in graph 01/1 LumeLEX

7 LUMELEX 0 ACCESSORIES SPREAD LENSES AND BEAM SOFTENER % of Light No. Description Transmission AA0 Spread Lens/Clear ( X 0 ) AA Spread Lens/Clear ( X 0 ) AA Spread Lens/Clear (0 X 0 ) AA Spread Lens/Clear ( X 0 ) AA Beam Softener/Clear 0 ( X ) BACKER RING AAB Aluminum ring to hold gel when no other size AA accessories is being used. Black finsih. 1 LIGHT BLOCKING SCREENS AA Stainless steel mesh screens used alone or in combinations will block from approximately 0% to 0% of the transmitted light without changing color temperature of the light LOUVER HEX AA 1/ thick Hexcell black metal louver used for thin profile. Black finsih. No. % of Light Blocked AA01S 0 AA0S 0 AA0S 0 1. Figures vary based upon LED Module/Optic being used and relationship of screen(s) to LED Module/Optic and to each other. 01/1 LumeLEX

8 LUMELEX 0 GELS As the foremost innovator in accent lighting, LSI offers a complete range of pre-cut Gels to modify the spread and color of light for the LumeLEX LED Series. LumeLEX SPREAD GELS Size: AA ( mm diameter) Spread Gel GEL L1 AA 1 Spread Gel GEL L AA Spread Gel GEL L10 AA 10 Spread Gel GEL L0 AA 0 Spread Gel GEL L0 AA 0 Spread Gel GEL L0 AA 0 Spread Gel GEL L0 AA 0 Spread Gel GEL L0 AA 0 Spread Gel GEL L0B AA 0 by Spread Gel GEL L0B AA 0 by 0. Spread Gel GEL L0B1 AA 0 by 1 Spread Gel GEL L0B10 AA 0 by 10 Spread Gel GEL LB AA by Spread Gel GEL L0B0 AA 0 by 0 Spread Gel GEL R101 AA Beam Softener LumeLEX COLOR GELS Size: AA % of Light ( mm diameter) Gel Color Transmission GEL R AA Bastard Amber GEL R AA Pale Yellow GEL R1 AA Straw GEL R1 AA Straw Tint GEL R1 AA Medium Straw GEL R1 AA Golden Amber GEL R AA Orange Red 1 GEL R AA Light Red 1 GEL R AA Medium Red GEL R AA Lavender GEL R AA Booster Blue GEL R1 AA Sea Blue 0 GEL R AA Azure Blue GEL R1 AA Primary Green GEL R AA Light Grey 0 GEL R AA Medium Grey GEL R101 AA Light Frost N/A GEL R10 AA Tough Silk N/A GEL R11 AA Lt. Hamburg Frost N/A GEL R11 AA Blue Diffusion N/A GEL R0 AA Rose Gold Size: AA % of Light ( mm diameter) Gel Color Transmission GEL R1 AA Canary GEL R0 AA Half Blue GEL R1 AA Shell Pink GEL R AA Sapphire Blue GEL R AA Pale Grey 0 GEL R001 AA Storaro Red 1 GEL R00 AA Storaro Green 1 GEL R00 AA Storaro Violet GEL R0 AA Full Blue GEL R0 AA Third Blue GEL R1 AA Eighth Blue (Boosts 00K to 00K) 1 GEL R1 AA Tough 1/ Minusgreen GEL R10 AA Roscosun (1/ CTO) (Reduces 00K to 00K) GEL R1 AA Full Straw (CTS) 0 GEL R AA Quarter Straw (CTS) 1 GEL R0 AA CalColor 0 Cyan GEL R1 AA CalColor 1 Green GEL R0 AA CalColor 0 Green GEL R0 AA CalColor 0 Pink GEL R0 AA CalColor 0 Pink GEL R0 AA CalColor 0 Lavender * Backer Ring AAB required to hold gels when no other rimmed AA accesories are used. LSI ROSCO GEL CCT CONVERSION CHART FROM 000K Type ROSCO # ROSCO Description Resulting CCT 0 Double CTO 11 0 Sun CTO 1 01 Sun 1 11 Sun / CTO 1 0 Sun 1/ CTO 1 0 Sun 1/ CTO 10 Sun 1/ CTO 0 11 UV Filter 0 0 Double Blue N/A 0 Full Blue 0 Three-Quarter Blue 0 Half Blue 0 Third Blue 1 0 Quarter Blue 1 Eighth Blue 11 Amber Filters Lower CCT Blue Filters Raise CCT 01/1 LumeLEX

9 COLOR MEDIA COLOR FILTERS As the foremost innovator in accent lighting, LSI offers a complete range of permanent fade-free glass color filters, which are available in nine stock diameters. All glass color filters are rimmed in a seamless aluminum ring and are slotted for heat expansion. Size Diameter LSI Fixture Series AAA / LumeLEX 00/00/01/0, SSLCX1, SSL0, LumeLEX MAR-S AA LumeLEX 0 (with LX0-Holder or LX0-Barndoor), LumeLEX 0, LumeLEX 0, LumeLEX 0 A 1/ LumeLEX 00, SSL0, SSLCX0, SSLGR0CL, SSLGR B 1/ LumeLEX MAR-L C / LumeLEX 0, LumeLEX 0, SSL, SSLCX, SSLCX, SSLGRCL 1 % of Light No. Color Transmission 0 Medium Pink 0 Deep Pink 0 Flesh Pink 0 Pale Lavender 1 0 Surprise Pink 1 0 Lilac 1 10 Warm Red Strawberry 1 Ruby 1 Magenta 1 1 Light Amethyst 1 Medium Amethyst 1 1 Deep Amethyst 1 Olive 1 1 Light Green 0 Medium Green 1 Deep Green Silver green Yellow Green Emerald Green 1 Light Turquoise Medium Turquoise 0 Deep Turquoise 1 Light Blue 0 Medium Blue Daylight Gene Moore Blue 1 Grey Light Blue Green 1 Light Amber 0 Medium Amber 1 Deep Amber Straw Gold Canary Yellow Lemon 1 Pumpkin Tangerine 0 Orange Pink Gold 0 Bronze 1 Brass 11 Autumn Tan 11 Leaf Brown 1 Butter Pecan Toasted Almond 1 Notes: 1. Values given are approximate due to slight variations in glass color and thickness. 01/1 LumeLEX

10 COLOR MEDIA DICHROIC COLOR FILTERS In addition to our complete line of glass color filters, LSI now offers dichroic glass color filters that achieve purer, more saturated, richer color by selective wavelength transmission. Since these filters reflect rather than absorb the unwanted color wavelengths, a higher intensity of colored light can be obtained with fewer or lower wattage fixtures. In addition, this selective transmission allows for very accurate color matching from filter to filter. All standard LSI filter sizes are available in a wide palette of well chosen dichroic colors that can be used with all LSI fixtures that accept accessories. LSI dichroic glass color filters have the added benefit of being rimmed for extra durability to allow for frequent usage without fear of breakage or edge chipping. Size Diameter LSI Fixture Series AAA / LumeLEX 00/00/01/0, SSLCX1, SSL0, LumeLEX MAR-S AA LumeLEX 0 (with LX0-Holder or LX0-Barndoor), LumeLEX 0, LumeLEX 0, LumeLEX 0 A 1/ LumeLEX 00, SSL0, SSLCX0, SSLGR0CL, SSLGR B 1/ LumeLEX MAR-L C / LumeLEX 0, LumeLEX 0, SSL, SSLCX, SSLCX, SSLGRCL Technical Data Dichroic color filters are created in a vacuum chamber by multi-layer vapor deposits of different minerals onto low expansion, chemically resistant Borosilicate glass. Deposits are made in alternating layers of varying microscopic thickness which allow very narrow color wavelengths to be selectively transmitted and all other wavelengths to be reflected. LSI does not recommend using dichroic color filters with lamps or fixtures that have beam spreads greater than 0 because a secondary color aura is created by the wide angular transmitted wavelengths that are different than the desired color wavelength. Since there is mainly transmission and reflection of the color wavelengths by the dichroic filter and very little absorption, the dichroic filter can be used with many high temperature lights that normally would not accept color filters. % of Light No. Color Transmission 001 Light Pink 00 Medium Pink 00 Hot Pink Pale Pink 010 Deep Magenta 011 Lavender 01 Vivid Magenta 1 01 Lavender Accent 01 Lilac 01 Purple Fusion 1 00 Sky Blue 01 Sea Blue 0 Cyan 0 Light Blue Green 0 0 Primary Blue 0 Medium Red Blue 1 0 Deep Purple 1 0 Peacock Blue 0 Mediterranean Blue 0 0 Boost Blue 1 00 Light Yellow Green 01 Fern Green 0 Turquoise 0 Primary Green 1 0 Industrial Green 00 Yellow 0 01 Amber 1 0 Amber Blush 0 Bastard Amber 1 0 Goldenrod 0 Bright Straw 00 Medium Orange 1 01 Orange 00 Flame Red 01 Primary Red 01/1 LumeLEX 10