2088 SERIES 120/277V LED XTM 19MM LUMELEX MOUNTING OPTIONS. Lighting Services Inc. 12/18

Transcription

1 LUMELEX 2088 SERIES 0/7V LED XTM MM Remote phosphor technology produces high quality, high output light with a consistent, even field for the most demanding applications of museum and retail accent lighting. Designed for the Xicato XTM mm LED module up to 59 Watts Extremely tight color consistency (less than 2 MacAdam Ellipses) System efficiency up to 67 lumens/watt Backed by Xicato s Five Year Color Consistency and Lumen Maintenance Warranty 50,000 hour life to 70% lumen output, L70 at 95 F max ambient Choice of color temperature Color Rendering Index (CRI) of either 98 (high) or 83+ (standard) Choice of lumen outputs (delivered lumens) Tested to LM79 and LM80 Protocols, TM-30 available Hidden integral electronic driver compatible with reverse phase (ELV compatible) dimmers down to 5% Field interchangeable optics (15-60 ) modify the beam spread distribution Integral polycarbonate accessory cartridge accepts up to three size-c LSI filters and accessories Integral dimmer available Can be specified as either Lutron-LTE (2 wire forward phase) or Lutron-L3D (3 wire Hot-Dim or 4-wire Eco-System, canopy mount only), capable of dimming to 1% Finishes: LSI Black, White, and Silver Fixture weight: 9 lbs All modules are field replaceable MOUNTING OPTIONS Please review the ORDERING INFORMATION section on the next page on how to specify the following: Lumens/CRI/Wattage Color Temperature Optic - mm/beam spread LX2088-XXXXX-XXXXXX-00-XXXXXX 7 5/ Lexan fitting for 1 and 2 circuit LSI track. With On/Off switch. LX2088-XXXXX-XXXXXX-0E-EDXXXX Lexan fitting with integral dimmer (for use with ED dimming driver 20%). LX2088-XXXXX-XXXXXX-LT-LTXXXX Lexan fitting with LumenTalk dimmer (for use with LT dimming driver (<1%). LX2088-XXXXX-XXXXXX-5A-XXXXXX Canopy for permanent mounting on standard 4 octagonal junction boxes. Other Options (Consult Factory): Custom Stems, specify length (4 - ) Custom color, RAL palette Security/Worklite Fixture, use EF as mounting option (track mount only) 7 1/8

2 Lighting Services Inc Job Name Here Fixture Type Here Designer/Firm Name Here Ordering Information Here ORDERING INFORMATION Xicato XTM mm Fixture 1. Choose the desired LED Module (T) for XTM (mm) 2. Choose the numeric code to designate the desired LED Rating LED Module/CRI/Wattage (20-83) for 2000/83/23 (20-98) for 2000/98/31 (30-83) for 3000/83/33 (30-98) for 3000/98/39 (40-83) for 4000/83/48 (50-83) for 5000/83/59 6 7/ 5mm 1/2 3. Choose the numeric code to designate the desired Color Temperature () for 00K (30) for 3000K () for 00K (40) for 4000K For other CCT, consult factory 4mm 4. Choose the alpha-numeric code to designate the Optic (K1) for 111mm/15 (W2) for 72mm/20 (J3) for 111mm/30 (W4) for 72mm/40 5. Select your Mounting Option (0E) Track Fitting with Integral Dimmer (00) Track Fitting (LT) Lumentalk Fitting (2G) Unistrut Fitting (3G) C-clamp Fitting (5A) Canopy Fitting 6. Choose the letter code for Dimming Type: (TE) Trailing Edge (ELV Reverse Phase) (5%) (ED) Integral Dimming (20%) (0E & 5A fitting only) (LT) Lumentalk (<1%) (LT fitting only) () 0-V (20%) (5A fitting only) (L2) Lutron Hilume (2-Wire phase control) (<1%) LTE Forward phase control (0V only) (L3) Lutron Hilume (3 or 4 control wires) (<1%) 1 orange wire for hot dim 2 purple wires for digital/eco-system L3D (5A fitting only) 1/ 255mm 7. Choose the desired Voltage: (0) for 0V (230) for V (7) for 7V 8. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX T FIXTURE LED MODULE LED RATING COLOR TEMP J TE OPTIC FITTING 0 DIMMING VOLTAGE B FINISH 9. Don t forget your Accessories! 5 3/4 6mm Color Temperature & Center Point Tolerance Color Temp Center Point Tolerance 00K 00K +/- 40K 3000K 2950K +/- 50K 00K 3420K +/- 60K 4000K 4000K +/- 70K Glass Color Filters C Other accessories: As the foremost innovator in accent lighting, LSI offers a complete range of permanent fade-free glass color filters, which are available in nine stock diameters. LX-K-REF-CLR (111mm/15 ) Rf - Fidelity T-TS9-83 Ra- CRI 83 Rg - Gamut Area 78 1 T-TS LX-W20-REF-CLR (72mm/20 ) LX-J30-REF-CLR (111mm/30 ) LX-W40-REF-CLR (72mm/40 ) Color and Spread Gels C Hood CIN Backer Ring CB Chromaticity Specifications LED ACCESSORIES Louver Hex C Beam Softener C998 Lighting Blocking Screens C801S, C802S, C803S Spread Lenses C990, C992, C995, C996 Solid State /18

3 LUMELEX 2088 SERIES XICATO XTM MM PERFORMANCE The performance characteristics of the LumeLEX family of products can be customized based on the LED module and the optic (reflector) selected. Each available LED module is defined by four characteristics the color rendering index (CRI), the correlated color temperature (CCT), the power that it uses (watts), and its available lumens. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LX2088-T20-83K1-00-TE0B, the T20-83 represents an LED module with an output of 2000 lumens, a CRI of 83, a power usage of 23 watts and a color temperature of 00K. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the K1 in LX2088-T20-83K1-00-TE0B is a 111mm diameter optic that has a 15-Degree beam with a narrow field. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power LED Module Optic (Reflector) Lumens/CRI/ Wattage K1 W2 J3 W4 2000/83/23 11,3 6,830 4,030 2, /98/31 11,3 6,830 4,030 2, /83/33,974,245 6,044 4,0 3000/98/39,974,245 6,044 4,0 4000/83/48 22,632 13,660 8,059 5, /83/59 28,290,075,074 6,950 Delivered Lumens LED Module Optic (Reflector) Lumens/CRI/ Wattage K1 W2 J3 W4 2000/83/23 1,454 1,5 1,472 1, /98/31 1,454 1,5 1,472 1, /83/33 2,180 1,763 2,208 1, /98/39 2,180 1,763 2,208 1, /83/48 2,907 2,1 2,944 2,9 5000/83/59 3,634 2,938 3,680 2,848 Efficacy = Lumens Per Watt LED Module Optic (Reflector) Lumens/CRI/ Wattage K1 W2 J3 W4 2000/83/ /98/ /83/ /98/ /83/ /83/ Absolute range of values are +/- % of typical value, and are for all color temperatures LED Module Lumens/CRI/Wattage 2000/83/ /98/ /83/ /98/ /83/ /83/59 Letter Code Nominal Fixture Power (+/- 20%), Watts Maximum Inrush Current Amps Minimum Power Factor Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-01.

4 LUMELEX 2088 SERIES XICATO XTM MM OPTICS 2 9/ (65mm) 4 3/8 (111mm) LX-K-REF-CLR (J1) (111mm/15 ) Faceted reflectively coated metal optic. Tool-less twist and lock installation. Clear Finish. 1 11/ (44mm) 2 3/4 (70mm) LX-W20-REF-CLR (W2) (72mm/20 ) Faceted reflectively coated metal optic. Tool-less twist and lock installation. Clear finish. 2 9/ (65mm) 4 3/8 (111mm) LX-J30-REF-CLR (J3) (111mm/30 ) Faceted reflectively coated metal optic. Tool-less twist and lock installation. Clear Finish. 1 11/ (44mm) 2 3/4 (70mm) LX-W40-REF-CLR (W4) (72mm/40 ) Faceted reflectively coated metal optic. Tool-less twist and lock installation. Clear finish. Solid State /18

5 LUMELEX 2088 SERIES XICATO XTM MM PHOTOMETRIC DATA LED RATING: K1-111mm DIA Optic Beam Spread (minimum) 15 Center Beam Candlepower 974 CRI 98 W2-72mm DIA Optic Beam Spread (minimum) 20 Center Beam Candlepower 245 CRI 98 J3-111mm DIA Optic Beam Spread (minimum) 30 Center Beam Candlepower 6044 CRI 98 M8-70mm DIA Optic (WFA: Wide Field Angle) (Narrow Field Angle) Beam Spread (minimum) 40 Center Beam Candlepower 40 CRI 98 LED RATING: K1-111mm DIA Optic Beam Spread (minimum) 15 Center Beam Candlepower W2-72mm DIA Optic Beam Spread (minimum) 20 Center Beam Candlepower 075 J3-111mm DIA Optic Beam Spread (minimum) 20 Center Beam Candlepower 075 J3-111mm DIA Optic (WFA: Wide Field Angle) Beam Spread (minimum) 30 Center Beam Candlepower 074 W4-72mm DIA Optic (WFA: Wide Field Angle) (Narrow Field Angle) Beam Spread (minimum) 40 Center Beam Candlepower 6950 LED RATING: All Max. Footcandles at 0 Beam Axis LED RATING: All Max. Footcandles at 0 Beam Axis W4 (40 ) J3 (30 ) W2 (20 ) K1 (20 ) All Distances in Feet Photometric Data based on LED Rating: (3000 Lumens/98CRI/39watts) W4 (40 ) J3 (30 ) W2 (20 ) K1 (20 ) All Distances in Feet Photometric Data based on LED Rating: (5000 Lumens/83CRI/59watts)

6 LUMELEX 2088 ACCESSORIES HOOD CIN 3 inch deep hood 1 LIGHT BLOCKING SCREENS C Stainless steel mesh screens used alone or in combinations will block from approximately 20% to 90% of the transmitted light without changing color temperature of the light No. % of Light Blocked C801S 20 C802S 30 C803S 40 SPREAD LENSES AND BEAM SOFTENER No. Description % of Light Transmission 990 Spread Lens/Clear 83 (5 X 50 ) 992 Spread Lens/Clear 85 (5 X 30 ) 995 Spread Lens/Clear 83 (50 X 50 ) 996 Spread Lens/Clear 86 (45 X 50 ) 998 Beam Softener/Clear 80 (45 X 45 ) BACKER RING CB Stainless steel ring to hold gel when no other size C accessories is being used. LOUVER HEX C 1/8 thick Hexcell black metal louver used for thin profile. 1. Figures vary based upon LED Module/Optic being used and relationship of screen(s) to LED Module/Optic and to each other. Solid State /18

7 LUMELEX 2088 SERIES GELS As the foremost innovator in accent lighting, LSI offers a complete range of pre-cut Gels to modify the spread and color of light for the LumeLEX LED Series. LumeLEX SPREAD GELS Size: C (1 mm diameter) Spread Gel GEL-L1-C 1 Spread Gel GEL-L5-C 5 Spread Gel GEL-L-C Spread Gel GEL-L20-C 20 Spread Gel GEL-L30-C 30 Spread Gel GEL-L40-C 40 Spread Gel GEL-L60-C 60 Spread Gel GEL-L80-C 80 Spread Gel GEL-L30B5-C 30 by 5 Spread Gel GEL-L40B2-C 40 by 0.2 Spread Gel GEL-L60B1-C 60 by 1 Spread Gel GEL-L60B-C 60 by Spread Gel GEL-L75B45-C 75 by 45 Spread Gel GEL-L90B60-C 90 by 60 Spread Gel GEL-R1-C Beam Softener LumeLEX COLOR GELS Size: C (1 mm diameter) Gel Color Size: C (1 mm diameter) Gel Color GEL-R2-C GEL-R7-C GEL-R-C GEL-R13-C GEL-R-C GEL-R-C GEL-R25-C GEL-R26-C GEL-R-C GEL-R57-C GEL-R62-C GEL-R71-C GEL-R72-C GEL-R91-C GEL-R97-C GEL-R98-C GEL-R1-C GEL-R4-C GEL-R1-C GEL-R1-C GEL-R305-C Bastard Amber Pale Yellow Straw Straw Tint Medium Straw Golden Amber Orange Red Light Red Medium Red Lavender Booster Blue Sea Blue Azure Blue Primary Green Light Grey Medium Grey Light Frost Tough Silk Light Hamburg Frost Blue Diffusion Rose Gold GEL-R3-C Canary GEL-R3204-C Half Blue GEL-R331-C Shell Pink GEL-R383-C Sapphire Blue GEL-R397-C Pale Grey GEL-R2001-C Storaro Red GEL-R2004-C Storaro Green GEL-R2009-C Storaro Violet GEL-R3202-C Full Blue GEL-R3206-C Third Blue GEL-R36-C Eighth Blue (Boosts 3200K to 3300K) GEL-R3318-C Tough 1/8 Minusgreen GEL-R34-C Roscosun (1/8 CTO) (Reduces 5500K to 4900K) GEL-R3441-C Full Straw (CTS) GEL-R3443-C Quarter Straw (CTS) GEL-R4330-C CalColor 30 Cyan GEL-R4415-C CalColor 15 Green GEL-R4490-C CalColor 90 Green GEL-R4860-C CalColor 60 Pink GEL-R4890-C CalColor 90 Pink GEL-R4930-C CalColor 30 Lavender * Backer Ring CB required to hold gels when no other rimmed C accesories are used.

8 COLOR MEDIA COLOR FILTERS As the foremost innovator in accent lighting, LSI offers a complete range of permanent fade-free glass color filters, which are available in nine stock diameters. All glass color filters are rimmed in a seamless aluminum ring and are slotted for heat expansion. Size Diameter LSI Fixture Series AAA 2 3/8 LumeLEX 2020/2030/2031/2038, SSLCX, SSL260, LumeLEX MAR-S AA 3 LumeLEX 2024 (with LX2024-Holder or LX2024-Barndoor), LumeLEX 2026, LumeLEX 2044, LumeLEX 2048 A 3 1/2 LumeLEX 2060, SSL230, SSLCX30, SSLGR30CL, SSLGR36 B 4 1/4 LumeLEX MAR-L C 4 3/4 LumeLEX 2084, LumeLEX 2088, SSL238, SSLCX36, SSLCX38, SSLGR38CL 1 % of Light No. Color Transmission 902 Medium Pink Deep Pink Flesh Pink Pale Lavender 907 Surprise Pink 908 Lilac 9 Warm Red 911 Strawberry 6 9 Ruby Magenta 1 9 Light Amethyst Medium Amethyst 9 Deep Amethyst 4 9 Olive Light Green Medium Green 25 9 Deep Green Silver green Yellow Green Emerald Green 925 Light Turquoise Medium Turquoise 40 9 Deep Turquoise 928 Light Blue Medium Blue Daylight Gene Moore Blue Grey Light Blue Green 939 Light Amber Medium Amber Deep Amber Straw Gold Canary Yellow Lemon Pumpkin Tangerine Orange Pink Gold Bronze Brass Autumn Tan Leaf Brown 954 Butter Pecan Toasted Almond 1 Notes: 1. Values given are approximate due to slight variations in glass color and thickness.

9 COLOR MEDIA DICHROIC COLOR FILTERS In addition to our complete line of glass color filters, LSI now offers dichroic glass color filters that achieve purer, more saturated, richer color by selective wavelength transmission. Since these filters reflect rather than absorb the unwanted color wavelengths, a higher intensity of colored light can be obtained with fewer or lower wattage fixtures. In addition, this selective transmission allows for very accurate color matching from filter to filter. All standard LSI filter sizes are available in a wide palette of well chosen dichroic colors that can be used with all LSI fixtures that accept accessories. LSI dichroic glass color filters have the added benefit of being rimmed for extra durability to allow for frequent usage without fear of breakage or edge chipping. Size Diameter LSI Fixture Series AAA 2 3/8 LumeLEX 2020/2030/2031/2038, SSLCX, SSL260, LumeLEX MAR-S AA 3 LumeLEX 2024 (with LX2024-Holder or LX2024-Barndoor), LumeLEX 2026, LumeLEX 2044, LumeLEX 2048 A 3 1/2 LumeLEX 2060, SSL230, SSLCX30, SSLGR30CL, SSLGR36 B 4 1/4 LumeLEX MAR-L C 4 3/4 LumeLEX 2084, LumeLEX 2088, SSL238, SSLCX36, SSLCX38, SSLGR38CL Technical Data Dichroic color filters are created in a vacuum chamber by multi-layer vapor deposits of different minerals onto low expansion, chemically resistant Borosilicate glass. Deposits are made in alternating layers of varying microscopic thickness which allow very narrow color wavelengths to be selectively transmitted and all other wavelengths to be reflected. LSI does not recommend using dichroic color filters with lamps or fixtures that have beam spreads greater than 40 because a secondary color aura is created by the wide angular transmitted wavelengths that are different than the desired color wavelength. Since there is mainly transmission and reflection of the color wavelengths by the dichroic filter and very little absorption, the dichroic filter can be used with many high temperature lights that normally would not accept color filters. % of Light No. Color Transmission 2001 Light Pink Medium Pink Hot Pink Pale Pink Deep Magenta Lavender Vivid Magenta Lavender Accent Lilac Purple Fusion 2020 Sky Blue Sea Blue Cyan Light Blue Green Primary Blue Medium Red Blue Deep Purple 20 Peacock Blue Mediterranean Blue Boost Blue Light Yellow Green Fern Green Turquoise 2043 Primary Green Industrial Green Yellow Amber Amber Blush Bastard Amber Goldenrod Bright Straw Medium Orange Orange Flame Red 2071 Primary Red 25 Notes: 1. Values given are approximate due to slight variations in glass color and thickness. Solid State /18