Automation Controls Catalog VDE a/c/2a/2c/a/a power relays for power supply JW RELAYS RoHS compliant Protective construction: Flux-resistant /Sealed ORDERING INFORMATION Contact arrangement : Form C a: Form A 2: 2 Form C 2a: 2 Form A JW Contact capacity Nil: ( A) F: High capacity ( A)* Protective construction S: Sealed H: Flux-resistant Pick-up N: 7% of nominal Coil insulation class Nil: Class E insulation B: Class B insulation DCV, DCV, DC9V, DC2V, DC24V, DC48V Contact material F: AgSnO2 (a) Nil: AgNi (c, 2a, 2c) *Only for Form A and Form C Certified by UL, CSA, VDE, SEMKO, FIMKO and SEV FEATURES. Miniature package with universal terminal footprint 2. High dielectric withstanding for transient protection:, V surge in µs between coil and contact 3. Sealed construction 4. Class B coil insulation s available. VDE, TÜV, SEMKO, SEV, FIMKO also approved. Sockets are available N TYPICAL APPLICATIONS. Home appliances TV sets, VCR, Microwave ovens 2. Office machines Photocopiers, Vending machines 3. Industrial equipment NC machines, Robots, Temperature controllers 24.2 Panasonic Corporation 24 ASCTB9E 242-T
TYPES ) Form A (A) Sealed Flux-resistant V DC JWaSN-DCV-F JWaHN-DCV-F V DC JWaSN-DCV-F JWaHN-DCV-F 9V DC JWaSN-DC9V-F JWaHN-DC9V-F 2V DC JWaSN-DC2V-F JWaHN-DC2V-F 24V DC JWaSN-DC24V-F JWaHN-DC24V-F 48V DC JWaSN-DC48V-F JWaHN-DC48V-F packing: Carton pcs. Case pcs. 3) Form C (A) Sealed Flux-resistant V DC JWSN-DCV JWHN-DCV V DC JWSN-DCV JWHN-DCV 9V DC JWSN-DC9V JWHN-DC9V 2V DC JWSN-DC2V JWHN-DC2V 24V DC JWSN-DC24V JWHN-DC24V 48V DC JWSN-DC48V JWHN-DC48V packing: Carton pcs. Case pcs. ) 2 Form A (A) Sealed Flux-resistant V DC JW2aSN-DCV JW2aHN-DCV V DC JW2aSN-DCV JW2aHN-DCV 9V DC JW2aSN-DC9V JW2aHN-DC9V 2V DC JW2aSN-DC2V JW2aHN-DC2V 24V DC JW2aSN-DC24V JW2aHN-DC24V 48V DC JW2aSN-DC48V JW2aHN-DC48V packing: Carton pcs. Case pcs. * Sockets available. 2) Form A High capacity ( A) Sealed Flux-resistant V DC JWaFSN-DCV-F JWaFHN-DCV-F V DC JWaFSN-DCV-F JWaFHN-DCV-F 9V DC JWaFSN-DC9V-F JWaFHN-DC9V-F 2V DC JWaFSN-DC2V-F JWaFHN-DC2V-F 24V DC JWaFSN-DC24V-F JWaFHN-DC24V-F 48V DC JWaFSN-DC48V-F JWaFHN-DC48V-F packing: Carton pcs. Case pcs. 4) Form C High capacity ( A) Sealed Flux-resistant V DC JWFSN-DCV JWFHN-DCV V DC JWFSN-DCV JWFHN-DCV 9V DC JWFSN-DC9V JWFHN-DC9V 2V DC JWFSN-DC2V JWFHN-DC2V 24V DC JWFSN-DC24V JWFHN-DC24V 48V DC JWFSN-DC48V JWFHN-DC48V packing: Carton pcs. Case pcs. ) 2 Form C (A) Sealed Flux-resistant V DC JW2SN-DCV JW2HN-DCV V DC JW2SN-DCV JW2HN-DCV 9V DC JW2SN-DC9V JW2HN-DC9V 2V DC JW2SN-DC2V JW2HN-DC2V 24V DC JW2SN-DC24V JW2HN-DC24V 48V DC JW2SN-DC48V JW2HN-DC48V packing: Carton pcs. Case pcs. Note: Class B coil insulation is available. Ex) JWaSN-B-DC2V-F RATING. Coil data Pick-up (at 2 C 8 F) Drop-out (at 2 C 8 F) Nominal operating current [±%] (at 2 C 8 F) Coil resistance [±%] (at 2 C 8 F) V DC ma 47Ω V DC 88mA 8Ω 9V DC 7%V or less of %V or more of 8mA Ω nominal nominal 2V DC (Initial) (Initial) 44mA 27Ω 24V DC 22mA,Ω 48V DC ma 4,4Ω Nominal operating power applied (at 2 C 8 F) Note: The pick-up and drop out s rise approximately.4% for every C 33.8 F given a standard ambient temperature of 2 C 8 F. Therefore, when using relays where the ambient temperature is high, please take into consideration the rise in pick-up and drop out s and keep the coil applied within the maximum applied. 3mW 3%V of nominal (at C 4 F) 2%V of nominal (at 8 C 8 F)* 4 2 Panasonic Corporation 24 ASCTB9E 242-T
2. Specifications Characteristics Item Specifications High capacity Contact material Form A: AgSnO2 Form C, 2 Form A and 2 Form C: AgNi Contact Arrangement Form A, Form C, 2 Form A and 2 Form C Form A and Form C Contact resistance (Initial) mω (By drop V DC A) Nominal switching capacity (resistive load) A 2V AC, A 3V DC A 2V AC, A 3V DC switching power (resistive load),2va, W 2,VA, 3W Rating switching 2V AC, 3V DC switching current A A switching capacity (reference value)* ma, V DC Insulation resistance (Initial),MΩ (at V DC) Measurement at same location as Breakdown section. Between open contacts, Vrms for min. (Detection current: ma) Breakdown (Initial) Between contact and coil, Vrms for min. (Detection current: ma) Between contact sets 3, Vrms for min. (2 Form A, 2 Form C) (Detection current: ma) Electrical characteristics Temperature rise (coil) Form A: 4 C 3 F, Form C, 2 Form A and 2 Form C: C 3 F (resistive method, with nominal coil and at nominal switching capacity, at 2 C 8 F) Surge breakdown * 2, V (Between contact and coil) (Initial) (at nominal ) (at 2 C 8 F) ms (excluding contact bounce time.) (at nominal ) (at 2 C 8 F) ms (excluding contact bounce time) (Without diode) Functional 98 m/s 2 (Half-wave pulse of sine wave: ms; detection time: µs.) Shock resistance Mechanical Destructive 98 m/s 2 (Half-wave pulse of sine wave: ms.) characteristics Functional to Hz at double amplitude of. mm (Detection time: µs.) Vibration resistance Destructive to Hz at double amplitude of 2. mm Mechanical (at 8 times/min.) Expected life Electrical (at times/min.) (at resistive load) Ambient temperature* 4 : 4 C to + C 4 F to 4 F (Class E), Conditions for operation, transport and storage* 3 (Class B: 4 C to +8 C 4 F to 8 F) Conditions Humidity: to 8% R.H. (Not freezing and condensing at low temperature) operating speed Flux-resistant : 2 times/min., Sealed : times/min. (at nominal switching capacity) Unit weight Approx. 3 g.4 oz * Specifications will vary with foreign standards certification ratings. Notes: *. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. Wave is standard shock of ±.2 µs according to JEC-22-98 *3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. *4. The pick-up and drop out s rise approximately.4% for every C 33.8 F given a standard ambient temperature of 2 C 8 F. Therefore, when using relays where the ambient temperature is high, please take into consideration the rise in pick-up and drop out s and keep the coil applied within the maximum applied. JW Form A: 4 C 3 F, Form C: C 3 F (resistive method, with nominal coil and at nominal switching capacity, at 2 C 8 F) REFERENCE DATA JW Form A (A). Maximum operating power 2. Operate/release time Sample: JWaSN-DC2V-F, pcs. Ambient temperature: 2 C 8 F 3. Life curve Form A ( A) DC resistive AC resistive load load Life, 4 2 V AC resistive load 3 V DC resistive load, Contact, V 8 9 2 Coil applied, %V 3 Panasonic Corporation 24 ASCTB9E 242-T
JW Form A High Capacity ( A). Maximum operating power 2. Operate/release time Sample: JWaFSN-DC2V, pcs. Ambient temperature: 2 C 8 F 3. Life curve DC resistive load AC resistive load Life, 4 2 V AC resistive load 3 V DC resistive load, Contact, V 8 9 2 Coil applied, %V 2 4 8 2 4-(). Coil temperature rise (Contact carrying current: A) Sample JWaFSN-DC2V-F Point measured: Inside the coil 4-(2). Coil temperature rise (Contact carrying current: A) Sample: JWaFSN-DC2V-F Point measured: Inside the coil Temperature rise, C 7 4 3 2 C C 8 C Temperature rise, C 7 4 3 2 C C 8 C 2 2 2 4 Coil applied, %V 2 4 Coil applied, %V JW Form C ( A) -(3). Maximum operating power 2. Operate/release time Sample: JWSN-DC2V-F, pcs. Ambient temperature: 2 C 8 F AC resistive load (cosϕ =.), Contact, V 3 2 9 8 7 4 3 2 8 9 2 3 Coil applied, %V JW Form C High Capacity ( A). Maximum operating power AC resistive load (cosϕ =.), Contact, V JW 2 Form A ( A). Maximum operating power 2. Operate/release time Sample: JW2aSN-DC24V-F, pcs. Ambient temperature: 2 C 8 F 4 AC resistive load (cosϕ =.) 3 2 8 4 2, Contact, V 8 9 2 Coil applied, %V 4 Panasonic Corporation 24 ASCTB9E 242-T
JW 2 Form C ( A). Maximum operating power 2. Operate/release time Sample: JW2SN-DC2V-F, pcs. Ambient temperature: 2 C 8 F AC resistive load (cosϕ =.) 9 8 7 4 3 2, Contact, V 8 9 2 3 Coil applied, %V DIMENSIONS (mm inch) JW Form A The CAD data of the products with a mark can be downloaded from: http:// Wiring diagram (Bottom view) N.O. 4 COM.94..43 2 3..42.4..3.2.3.2..2 8 Coil Note: Terminal numbers are not indicated on the relay. 3..38 28..2 2.94 Relay outline 2.8.4.9.3 Dimension: Less than mm.39inch: mm.39inch less than 3mm.8 inch: 3mm.8 inch: General tolerance ±. ±.4 ±.2 ±.8 ±.3 ±.2 4-. dia. 4-.9 dia. 3..38 2. 2.8.4 Tolerance: ±. ±.4 JW Form C Wiring diagram (Bottom view) 4 N.O. COM 2 N.C. 2.4. 8 Coil.94 3..38..43.3.2..2.3.2..2 3..42 Note: Terminal numbers are not indicated on the relay. 28. 3..28.38.. 2.8.4.8.3 Dimension: Less than mm.39inch: mm.39inch less than 3mm.8 inch: 3mm.8 inch: General tolerance ±. ±.4 ±.2 ±.8 ±.3 ±.2.94 3..38 3..38.. Relay outline -. dia. -.9 dia. Tolerance: ±. ±.4 Panasonic Corporation 24 ASCTB9E 242-T
JW 2 Form A and 2 Form C 2.4. Wiring diagram (Bottom view) 4 N.O. 3 COM 2 7 N.C. 8 Coil.3..97.97 28..28.9..43 7..29 2.8.4.8.3.3.2.3.2..2..2 Dimension: Less than mm.39inch: mm.39inch less than 3mm.8 inch: 3mm.8 inch: 3..42 General tolerance ±. ±.4 ±.2 ±.8 ±.3 ±.2 Note: Terminal numbers are not indicated on the relay. 7..29 Relay outline.3..97.9.97 8-. dia. 8-.9 dia. Tolerance: ±. ±.4 SAFETY STANDARDS Item Form A Form C 2 Form A 2 Form C High capacity Form A High capacity Form C UL/C-UL (Recognized) CSA (Certified) VDE (Certified) SEMKO (Certified) FIMKO SEV File No. Contact rating File No. Contact rating File No. Contact rating File No. Contact rating File No. Contact rating File No. Contact rating E4328 A 277V AC LR2 8787 A 2V AC 2787 A 2V AC. 22 A 2V AC A 3V DC (cosφ=.) (cosφ=.) (cosφ=.) /8HP 2V AC /8HP 2V AC E4328 E4328 E4328 E4328 E4328 A 277V AC A 3V DC /8HP 2V AC /8HP 2V AC A 277V AC A 3V DC /8HP 2V AC /8HP 2V AC B3 A 277V AC A 3V DC /8HP 2V AC /8HP 2V AC B3 A 277V AC A 3V DC /3HP 2V AC /3HP 2V AC A 277V AC A 3V DC /3HP 2V AC /3HP 2V AC Note: JW 2 Form A is as shown in the diagram above except the N.C. terminals are not present. LR2 LR2 LR2 LR2 LR2 A 277V AC A 3V DC /8HP 2V AC /8HP 2V AC B3 A 277V AC A 3V DC /8HP 2V AC /8HP 2V AC B3 A 277V AC A 3V DC /8HP 2V AC /8HP 2V AC B3 A 277V AC A 3V DC /8HP 2V AC /8HP 2V AC B3 A 277V AC A 3V DC /3HP 2V AC /3HP 2V AC B3 A 277V AC A 3V DC /3HP 2V AC /3HP 2V AC B3 4384 A 2V AC (cosφ=.) 3A 2V AC (cosφ=.4) 4384 A 2V AC (cosφ=.) 3A 2V AC (cosφ=.4) 4384 A 2V AC (cosφ=.) 3A 2V AC (cosφ=.4) 4384 A 2V AC (cosφ=.) 3A 2V AC (cosφ=.4) 8787 A 2V AC (cosφ=.) 8787 A 2V AC (cosφ=.) 8787 A 2V AC (cosφ=.) 2787 A 2V AC (cosφ=.) 2787 A 2V AC (cosφ=.) 2787 A 2V AC (cosφ=.) 4384 A 2V AC (cosφ=.) 7A 2V AC (cosφ=.4) High capacity A 3V DC (ms) 8787 A 2V AC (cosφ=.) A 3V DC (ms) 2787 A 2V AC (cosφ=.) 4384 A 2V AC 8787 A 2V AC 2787 A 2V AC (cosφ=.) (cosφ=.) (cosφ=.) 7A 2V AC A 3V DC (ms) (cosφ=.4) High capacity A 3V DC (ms). 22 A 2V AC (cosφ=.). 22 A 2V AC (cosφ=.). 22 A 2V AC (cosφ=.). 22 A 2V AC (cosφ=.). 22 A 2V AC (cosφ=.) NOTES. For cautions for use, please read GENERAL APPLICATION GUIDELINES on page B-. Panasonic Corporation 24 ASCTB9E 242-T
Automation Controls Catalog ACCESSORIES JW RELAY PC BOARD SOCKETS FEATURES Space saving design TYPES Product name SPECIFICATIONS Number of poles JW PC board socket JW-PS Applicable relay packing Form A Form C 2 Form A 2 Form C Inner carton Outer case JW2 PC board socket 2 JW2-PS Item Breakdown Insulation resistance Type PC board socket pole 2 poles, vrms for minute MΩ pcs. pcs. DIMENSIONS (mm inch) PC board socket 3±..2±.24 The CAD data of the products with a mark can be downloaded from: http://.8±..3±.4 Form A Form C -.3 dia. -. dia. 32±..2±.24 2.±..84±.24.7±.3.24±.2 4±..7±.24 Pre-soldering.3±..2±.4.3±..4±.4 (4.4) (.73). 3.. 3..38.38 2 Form A 2 Form C 8-.3 dia. 8-. dia. 7..29 (4) (.7).9.97.97 Tolerance: ±. ±.4 24.2 Panasonic Corporation 24 ASCTB8E 242-T