Drill presses 247 D019542_Jet_Catalog (247-257)247 247 7/1/2015 12:50:5 PM
www.jet-professional.com Mini milling and drilling machine Mini milling and drilling machine Spindle speed readout Tapping function Feeding depth readout Standard Accessories Ø10mm Drill Chuck Wrench Set Oil Can Cast iron construction Coarse feed for drilling, fine for milling Column tilts up to 45 for angled machining Two electronically variable control spindle speed ranges Two function machine - vertical mill or small pillar drill Supplied with 10mm chuck, drawbar and service tools JMMD-1 Drilling capacity 10 mm End milling capacity 10 mm Face milling capacity 16 mm Longitudinal axis (X) 180 mm Cross axis (Y) 140 mm Headstock travel (Z) 20 mm Throat 140 mm Head tilt 45 L, 45 R Max. distance spindle to table 0-220mm MT2 Motor output power 250 w Variable spindle speed - Low Range 100-1000 ±10% rpm Variable spindle speed - High Range Features: Well made mill/drill for small workshop use Digital downfeed and spindle speed indicators Dual downfeed controls Coarse for drilling, fine for milling Cabinet stand, clamp set available as extras Head tilts up to for angled and horizontal milling JMMD- Drilling capacity 25 mm Max. tapping capacity 12 mm End mill capacity 16 mm Face mill capacity 50 mm Longitudinal axis (X) mm Cross axis (Y) 145 mm Headstock travel (Z) 00 mm Throat 20 mm Max distance spindle to table 80 mm MT Spindle speed 100-1750 ±10% rpm 100-2000 ±10% rpm Table effective sive 550x160 mm Table effective size 240x145 mm T-slot size 12 mm T-slot size 8mm Head tilt 45 L, 45 R Overal dimension (LxWxH) x20x600 mm Motor output power 1000 W Packing size (LxWxH) 480x480x650 mm Overall dimension (LxWxH) 720x760x990 mm Weight (Net/Gross) 48/58 kg Packing size (LxWxH) 800x800x1060 mm Weight (Net/Gross) 165/198 kg 248 D019542_Jet_Catalog (247-257)248 248 7/1/2015 12:50:7 PM
Mini universal milling machine SUM-518 End mill capacity 16 mm Face mill capacity 0 mm Table longitudinal travel(x) 00 mm Table cross travel(y) 90 mm Spindle box travel(z) 205 mm Mini milling and drilling machine Features: Milling, drilling, boring, reaming. Swivel Head up to ± 45 of perpendicular Micro feed spindle Positive spindle lock Adjustable gibs on table High precision, rigidly built and powerful motor Longitudinal milling tilting angle 45 L, 45 R JMMD-2 Drilling capacity 16 mm End milling capacity 1 mm Face milling capacity 0 mm Longitudinal axis (X) 250/00 mm Cross axis (Y) 100/10 mm MT or R8 Head tilt 45 L, 45 R Motor output power W Table size 410/460x112 mm Head tilt 45 L, 45 R Spindle speed (Variable speed) 200-2000 rpm Max. sawing cutter diameter ø6 Table effective size 460x120 mm Overall size (LxWxH) 590x870x800mm Weight (Net/Gross) Packing size (LxWxH) Max. distance spindle to table 0-220mm MT 550 w 95/115 kg Motor output power Variable spindle speed - Low Range Packing size (LxWxH) 860x870x810 m Weight (Net/Gross) 62/80 kg 50-2 rpm 570x510x740 mm 249 D019542_Jet_Catalog (247-257)249 249 7/1/2015 12:50:42 PM
www.jet-professional.com Column type vertical drilling machine Max.driling diameter.(steel)and tapping diameter(mm) Max.travel of spindle(mm) JCVD-5 JCVD-40 JCVD-50 5/M22 40/M24 50/M27 155 190 200 20 60 80 Max.distance from spindle to generating line of column(mm) Max.distance between spindle. to the work table surface(mm) Max.distance from spindle end to the surface of base worktable(mm) 585 615 590 1140 1195 1175 Max.travel of spindle box(mm) 285 285 285 545 550 50 Max..vel of worktable and bracket(mm) Swivel angle of worktable ±4 bore (MT) 4 4 Sparkle speed steps 12 9 9 125-00 72-2150 70-2100 Spindle speed range(r/min) Spindle feed steps 0.1,0.2,0. 0.12,0.24, 0.4 0.12,0.24, 0.4 *420 570*480 600* 70*60 410*95 445*45 1.5 2 2.2 860x515x2170 885x640x2275 940x680x2405 475 600 710 Spite feed range(mm/r) Dimension of worktable(mm) Effective working area of worktable(mm) Power of motor(kw) Max machine dimension(mm) 4 Weight (KG) Drilling and tapping machine JDM-50 Max. drilling capacity 50mm (steel) Max. tapping capacity mm Max. tac milling capacity 100mm Max. end milling capacity 2mm MT4 Spindle stroke 210mm (manual)/180mm Step of spindle speeds 6 Range of spindle speeds 50-1rpm/100-00rpm Spindle feed range 0.1/02/0.0.4mm/rev. Diameter of quill 100mm Diameter of column 150mm Distance from spindle to column 50mm Distance from spindle nose to table 700mm Distance from spindle end to base 1290mm Table size 800 X 240mm Table travel X 280mm Table longitudinal feed range 20-125mm/min T-slot x 18-80mm Base size 940 x 580mm Main motor 2.2kw Coolant motor 60w Packing size 1010 x 1200 x 214mm Net weight 80kg 250 D019542_Jet_Catalog (247-257)250 250 7/1/2015 12:50:44 PM
Turret milling machine NO. Table size JTM-949 JTM-1050 / 1054 20x 1246( 9'x 49') JTM-1254 / 10 JTM-150 / 160 254 x 1270(10' x 50') 05x 170 ( 12' x54') x 150( 1'x54') 254 x 170(10' x54') 05 x1 (12' x 60') 0x1(1' x 60') Length travel 840 960 870 840 Cross travel 05 420 60 60 Vertical travel 420 40 40 12 470 15-415 0-420 0-45 0-45 T-slot no. and size Ram travel Distance frm spindle nose to table surface Spindle hose taper R8 ISO40 Spindle travel 127 Spindle speed Standard : 16 (shill grade) : 65-750 rpm (variable) 50Hz:65-4 60Hz:80-5440 Auto quit feed Spindle motor Three steps:0.04(0.0015")0.08(0.00")/0.15(0.006")mm/revolution 2.25Kw/HP.75kw/15HP Head swivel (L&R) Head lilting ( back & forward ) Y axis guide way 45 Fix or 45 fix fix Dovetail 55 Z axis guide way Dimension of package 1x 1470x 200 1160KG 1518 x 1550 x 2080 1566 x 1650x 2080 1800x 2016 x 1590KG 1700kg 200kg G.W Milling machine No JVHM-60 JVHM-20 Table size (mm) 120 x 60 120 x 20mm Number/width/distance of T-slot (mm) /18/80 /14/95 Table travel (mm) 980 x 00 x 450 1000 x 280 x ISO40 (V) /IS050 (H) Spindle speed/steps (rpm) 70-620/10 steps(v) 90-2000/18 steps (V) Max. drilling dia. (mm) 0 50 Max. tapping dia. (mm) 25 25 Quill travel (mm) 140 120 Max. swivel angle of headstock ± 45 ± 45 Vertical spindle axis to column surface (mm) 150-550 200-780 Vertical spindle nose to table surface (mm) 200-650 180-580 Vertical spindle axis to table surface (mm) 0-450 70-470 Longitudinal/transverse feed (mm/min) 15-70/575 22-420/9/10-168 Spindle motor power (kw).7(v) 4.0 (H) 2.2(V) 4.0(H) Overall dimension (mm) 2070 x 2020 x 20 1710 x 1720 x 20 G.W. (kg) 2200 2000 251 D019542_Jet_Catalog (247-257)251 251 7/1/2015 12:50:46 PM
www.jet-professional.com Turret Milling machine JTM 150V JTM 949V NO. Table size JTM 1050V JTM-949V JTM-1050V / 1054V 20x 1246( 9'x 49') JTM 1254V JTM-1254V / 10V JTM-150V / 160V 254 x 1270(10' x 50') 05x 170 ( 12' x54') x 150( 1'x54') 254 x 170(10' x54') 05 x1 (12' x 60') 0x1(1' x 60') Length travel 840 960 870 840 Cross travel 05 420 60 60 Vertical travel 420 40 40 T-slot no. and size Ram travel Distance frm spindle nose to table surface Spindle hose taper 12 470 15-415 0-420 0-45 0-45 R8 ISO40 Spindle travel 127 Spindle speed Standard : 16 (shill grade) : 65-750 rpm (variable) 50Hz:65-4 60Hz:80-5440 Auto quit feed Spindle motor Three steps:0.04(0.0015")0.08(0.00")/0.15(0.006")mm/revolution 2.25Kw/HP.75kw/15HP Head swivel (L&R) Head lilting ( back & forward ) Y axis guide way 45 Fix or 45 fix fix Dovetail 55 Z axis guide way Dimension of package 1x 1470x 200 1160KG 1518 x 1550 x 2080 1566 x 1650x 2080 1800x 2016 x 1590KG 1700kg 200kg G.W 252 D019542_Jet_Catalog (247-257)252 252 7/1/2015 12:50:48 PM
Horizontal knee-type milling machine JKM-1450X 7:24 ISO50 Distance from spindle center line to worktable (mm) 0-420 Distance from spindle center line to arm (mm) 175 Spindle speed (steps) (rpm) 60-1800 Arm travel (mm) Worktable size (mm) 1250 x 60 Main motor (Kw) 4 Worktable Longitudinal (mm) travel Cross (mm) 600 Worktable power feed motor (Kw) 750 250 Worktable elevating motor (Kw) 1.1 420 N.W (kg) 2 Worktable swivel angle ±45 Overall dimension (mm) 2220 x 1790 x 2040 Worktable longitudinal/cross power feed (steps) 22-555/8 Overall dimension(l x W x H)cm 188 x 170 x 18 (mm/min) Rapid:810 N.W. Kg 2200 Vertical (mm) Worktable elevating power feed ( /Number i ) Worktable-T slot 590 Width mm 18 Distance (mm) 80 Universal milling machine Specifications / Table size (mm) JUM-125X 460 x 125 900 x 450 x 650 x 1600 x 2000 ISO40 1200 x x 700 1 x x 700 ISO50 ISO50 Spindle speed range (rpm) 0-2050 (27) Table feed(x/y/z) (mm/min) 10-1000/10-1000/6-640/5- Table rapid speed (mm/min) Distance between spindle nose and table surface (mm) Distance from spindle center line to column (mm) Main motor power (kw) 60 Swivel angle of milling head JUM-2000X 5/18/80 T-Slots(NO./width/pitch) (mm) Table travel(x/y/z) (mm) JUM-1600X 2200/2200/1100 58-508 50-52550 20-670 28-728 7.5 5.5 AC servo motor Feed motor X/Y:15NM ; Z:18NM Max load (mm) Overall size (mm) Weight of machine (kg appx.) 800 2200 x 1950 x 2250 0 1800 20 x 2460 x 2080 0 1800 20 x 2860 x 2080 5 25 D019542_Jet_Catalog (247-257)25 25 7/1/2015 12:50:51 PM
www.jet-professional.com Vertical knee type milling machine Specification/ JKM-1600V JKM-125V JKM-170V JKM-1270V 60x1600 20x125 20x170 00x1270 /18/80 /18/70 /14/80 /14/80 750/100 750/100 720/820 720/820 Cross travel (mm) 20 20 00 00 Vertical travel (mm) 450 450 Table size (mm) T-slots (NO./Width/Pitch) (mm) Longitudinal travel (mm) Table feed. (X, Y. Z) (mm/min) Table rapid speed (X/Y/Z ) (mm/min) Spindle speed range (r/min) Spindle speed steps 1 Spindle travel (mm) Max.swivel angle of vertical milling head Distance between spindle nose and table surface (mm) Distance between spindle axis and column guideway 0 to teed Ac servo motor torque (N.m.) Main motor Power (kw) Overall dimensions(l x W x H) (mm) Net weight (kg) 0~750/20~/15~75 ( variable ) 1200/800/600 1000/1000/750 7:24 ISO50 7:24 ISO40 50-1475 50-1475 5-1 5-1 12 2 12 12 70 70 70 70 ± 0 ± 0 ± 0 ± 0 50-50- 5-45 5-45 78 78 285 285 10 10 10 10 5.5 5.5 1800/2520 x 2100 x 2150 2800/000 2700/2900 JUM1246NC 20*1246 JUM1270NC 254*1270 1720/1820 x 1680 x 1810 1550/1600 1/1550 CNC Universal turrent milling machine Table size (mm) T slot Table loading (kg) X axis travel (mm) Y axis travel Z axis (Quill move) travel (mm) X/Y/Z axis rapid feed (mm/min) X/Y/Z axis servo motor (kw) Knee vertical travel (mm) Ram travel (mm) Distance from spindle to table (mm) Standard: Spindle 16steps speed (rpm) Optional: Variable Milling head Motor Power (HP) Swiveling Head rotating Tilting CNC Package size (cm) G.W. (kg) 200 740 00 JUM170NC 254*170 *16 280 750 80 850 127 0 1 465 0-80 15 0-80 JUM1NC 05*1 50 900 60 410 0-410 50HZ:60-4/60HZ:80-5440 65-4200 Standard R8/Optional ISO40 KND/HD/GSK 165*190*220 190*220*22 1200 1 60-750 ISO40 5 200*200*225 1900 254 D019542_Jet_Catalog (247-257)254 254 7/1/2015 12:50:5 PM
Vertical machine center Specifications/ JMC1200 Table travel (X Y X) (mm) Table size (mm) JMC1000 JMC850 1200 X 600 X 600 1000 x 600 x 850 x x 120 x 620 1100x600 1000x850 Number/Width/Distance of Tstot (mm) Max. load of table (kg) 5-18-115 5-18-100 5-18-100 1000 600 Distance from spindle nose to table (mm) Distance from spindle axis to guideway (mm) Rapid feed speed (X Y Z) (m/min) Feed speed (X Y Z) 150-750 150-700 150-650 660 660 560 24/24/18 48/48/6 0/0/24 2.5-6000 2.5-10000 2.5-10000 BT40 BT40 BT40 Spindle speed range (rpm) 40-6000 60-6000 60-6000 Spindle motor power (kw) Taper of spindle (ACservo)7.5/11 (AC servo)7.5/11 (AC servo) 7.5 Tool magazine capability (qty) 24 20 16 Max, weight of tool (kg) 15 8 8 150 x 00 10x50 10 x 00 Max. dimension of tool (mm) Positioning accuracy (mm) ±0.012 ±0.015 ±0.015 Repeat positioning accuracy (mm) Min, time of tool change (sec) ±0.005 ± 0.0075 ±0.0075 1.4 2.5 250x 2 x 0 2800 x2200 x 0 2 x00 x 200 8200 570 4750 JRD-080 JRD-06 80 6 50 550-2000 -1600 20-1220 -2000 450-2000 50-1600 450 15 MT.6 MT.5 MT.5 Spindle speeds range 161250 201600 252000 Spindle speeds (steps) 16 16 16 0.04.2 0.04.2 0.04.2 800x1000 60x800 60x 2000 1600 1250 60 60 60 Main motor power (kw) 7.5 5.5 4.0 Movements motor power (kw) 1.5 1.5 1.5 10000 7000 Overall dimensions (mm) 70x1x4025 080x1250x 2x1060x2840 Packing dimensions (mm) 80x1450x00 200x1x00 2750x1120x00 Overall dimension (mm) Machine weight (kg) Radial drilling machine Specifications / Max drilling dia. (mm) Distance frpm spindle nose to table surface of base (mm) Distance between spindle axis and column (mm) Spindle travel (mm) Spindle feeding range (mm/r) Dimension of worktable (mm) Distance of headstock horizontal movement (mm) Rocker rotary angle N.W (kg) JRD-050 255 D019542_Jet_Catalog (247-257)255 255 7/1/2015 12:50:55 PM
www.jet-professional.com JETMAC JMV-102 CNC MILLING MACHINE Dimensions (L x W x H) Package dimensions (L x W x H) Table size T-slot size Weight Working travel Spindle Speed Spindle Power Input voltage Positioning accuracy JMV-102 1450mm x 150mm x 2000mm mm x 1mm x 2050mm 800mm x 250mm 16mm 1200 ~ 150kg X-axis: mm Y-axis: 240mm Z axis: mm 200 ~ 10000rpm/min 2.2kw BT0 Clamping tool diameter can be Feed rate 20v/v Motor torque Ball-screw 0.01mm 4 ~ 16mm Input and output ports X / Y axis: 10000mm/Min Z-axis: 10000mm/Min X-axis servo motor: 4.0Nm Y-axis servo motor: 4.0Nm Z axis servo motor: 4.0Nm PMI double nut ball screw USB, RS22 Interface: data transfer Standard 15-pin parallel port: MPG handwheel connection 256 D019542_Jet_Catalog (247-257)256 256 7/1/2015 12:50:57 PM
JLE-486 LASER CUTTER Sample work piece produce by JLE-486 257 D019542_Jet_Catalog (247-257)257 257 7/1/2015 12:51:00 PM