v.11 HMC6LC AMPLIFIER, 6-2 GHz Typical Applications The HMC6LC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space Functional Diagram Features Noise Figure: 2. db Gain: 21 db OIP3: 2 dbm Single Supply: +3V @ 3 ma Ohm Matched Input/Output RoHS Compliant x mm Package General Description The HMC6LC is a high dynamic range GaAs phemt MMIC Low Noise Amplifier housed in a leadless RoHS compliant xmm SMT package. Operating from 6 to 2 GHz, the HMC6LC features 21 db of small signal gain, 2. db noise figure and IP3 of +2 dbm across the operating band. This self-biased LNA is ideal for microwave radios due to its single +3V supply operation, and DC blocked RF I/O s. Electrical Specifications, T A = +2 C, Vdd 1, 2, 3 = +3V Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 6-12 12-2 GHz Gain 19 21 16 1. db Gain Variation Over Temperature.2.3.2.3 db/ C Noise Figure 2. 2. 2. 3 db Input Return Loss 1 12 db Output Return Loss 13 1 db Output Power for 1 db Compression (P1dB) 1 9 11 dbm Saturated Output Power (Psat) 11 13 dbm Output Third Order Intercept (IP3) 2 21 dbm Total Supply Current (Idd)(Vdd = +3V) 3 7 3 7 ma 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 71-329-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D
HMC6LC v.11 AMPLIFIER, 6-2 GHz Broadband Gain & Return Loss 3 Gain vs. Temperature 3 RESPONSE (db) 2 1-1 -2 S21 S11 S22-3 1 1 2 2 3 Input Return Loss vs. Temperature RETURN LOSS (db) - -1-1 -C GAIN (db) 2 2 1 1 -C Output Return Loss vs. Temperature RETURN LOSS (db) - -1-1 -C -2-2 -2-2 Noise Figure vs. Temperature 1 Output IP3 vs. Temperature 3 2 NOISE FIGURE (db) 6 2 -C IP3 (dbm) 2 1 1 -C For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 71-329-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D 2
HMC6LC v.11 AMPLIFIER, 6-2 GHz P1dB vs. Temperature 2 Psat vs. Temperature 2 P1dB (dbm) Reverse Isolation vs. Temperature ISOLATION (db) 16 12-1 -2-3 - - -C -C Psat (dbm) Power Compression @ 12 GHz Pout (dbm), GAIN (db), PAE(%) 16 12 2 2 1 1 Pout Gain PAE -C -6 - -2-1 -1 - INPUT POWER (dbm) 2 Gain, Noise Figure & Power vs. Supply Voltage @ 12 GHz 1 9 GAIN (db), P1dB (dbm) 2 1 1 Gain Noise Figure P1dB 7 6 3 2 NOISE FIGURE (db) 1 2. 3 3. Vdd (Vdc) 3 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 71-329-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D
HMC6LC v.11 AMPLIFIER, 6-2 GHz Absolute Maximum Ratings Typical Supply Current vs. Vdd Drain Bias Voltage (Vdd1, Vdd2, Vdd3) +3. Vdc Vdd (V) Idd (ma) RF Input Power (RFIN)(Vdd = +3. Vdc) Outline Drawing 1 dbm Channel Temperature 17 C Continuous Pdiss (T= C) (derate. mw/ C above C) Thermal Resistance (channel to ground paddle).73 W 119. C/W Storage Temperature -6 to +1 C Operating Temperature - to + C ESD Sensitivity (HBM) PKG-3 PIN 1 INDICATOR 1.1 1..9 SEATING PLANE Class 1A..9 SQ.7 TOP VIEW SIDE VIEW. REF. BSC.3.32.26 2 2 17 16 +2. 1 +3. 3 +3. 6 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS.36.3.2 EXPOSED PAD BOTTOM VIEW 3. REF.1 REF 32 9 1 PIN 1 3.6 3. SQ 3..2 MIN FOR PROPER CONNECTION OF THE EXPOSED PAD, REFER TO THE PIN CONFIGURATION AND FUNCTION DESCRIPTIONS SECTION OF THIS DATA SHEET. -2-217-D 32-Terminal Ceramic Leadless Chip Carrier [LCC] (E-32-1) Dimensions shown in millimeters. ORDERING GUIDE Part Number Package Material Lead Finish MSL Rating [1] Package Marking [2] HMC6LC Alumina, White Gold over Nickle MSL3 HMC6LCTR Alumina, White Gold over Nickle MSL3 HMC6LCTR-R Alumina, White Gold over Nickle MSL3 [1] Max peak reflow temperature of 26 C [2] -Digit lot number XXXX H6 XXXX H6 XXXX H6 XXXX For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 71-329-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D
HMC6LC v.11 AMPLIFIER, 6-2 GHz Pin Descriptions Pin Number Function Description Interface Schematic 1, 2, 6-19, 23-2, 27, 29, 31, 32 N/C 3,, 2, 22 GND RFIN 21 RFOUT 3, 2, 26 Vdd1, 2, 3 Application Circuit This pin may be connected to RF/DC ground. Performance will not be affected. These pins and package bottom must be connected to RF/DC ground. This pin is AC coupled and matched to Ohms. This pin is AC coupled and matched to Ohms. Power Supply Voltage for the amplifier. External bypass capacitors of 1 pf and 2.2 µf are required. Component Value C1, C2, C3 1 pf C, C, C6 2.2 µf For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 71-329-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D
HMC6LC v.11 AMPLIFIER, 6-2 GHz Evaluation PCB List of Materials for Evaluation PCB 1131 [1] The circuit board used in the application should use Item Description J1 - J2 PCB Mount K Connector J3 2 mm DC Header C1 - C3 1 pf Capacitor, 2 Pkg. C - C6 2.2 µf Capacitor, Tantalum U1 HMC6LC Amplifier PCB [2] 191 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 3 RF circuit design techniques. Signal lines should have Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Analog Devices upon request. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 71-329-7 Order online at www.analog.com Application Support: Phone: 1--ANALOG-D 6
Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC6LC HMC6LCTR