Data Sheet ACPL-8x7 Multi-Channel Full-Pitch Phttransistr Optcupler Descriptin The ACPL-827 is a DC-input dual-channel, full-pitch phttransistr ptcupler that cntains tw light emitting dides ptically cupled t tw separate transistrs. It is packaged in an 8-pin DIP package. Likewise, the ACPL-847 is a DC-input quad-channel, fullpitch phttransistr ptcupler that cntains fur light emitting dides ptically cupled t fur separate transistrs. It is packaged in a 16-pin DIP package. Bth ptcuplers are available in a wide-lead spacing ptin and a lead bend SMD ptin with an input-utput islatin vltage f 5 V rms. Respnse time, tr, is typically 4 μs and minimum CTR is 5% at input current f 5 ma. Features Current transfer rati (CTR: min. 5% at I F = 5 ma, V CE = 5V) High input-utput islatin vltage (V ISO = 5, V rms ) Respnse time (tr: typ. 4 μs at V CE = 2V, I C = 2 ma, R L = Ω) Cmpact dual-in-line package Safety and regulatry apprvals CSA UL 1577 IEC/EN/DIN EN 6747-5-2 Optins available: Leads with.4 in. (.16 mm) spacing (W) Lead bend fr surface munting (3) Tape and reel fr SMD (5) available nly fr ACPL-827 IEC/EN/DIN EN 6747-5-2 apprved (6) Lead free (E) Applicatins I/O interface fr prgrammable cntrllers, cmputers. Sequence cntrllers. System appliances, measuring instruments. Signal transmissin between circuits f different ptentials and impedances. Bradcm March 12, 218
ACPL-827 Pin Layut ACPL-847 Pin Layut Multi-Channel Full-Pitch Phttransistr Optcupler 8 7 6 5 16 15 14 13 12 11 9 1 2 3 4 1 2 3 4 5 6 7 8 Pin 1, 3 Pin 2, 4 Pin 5, 7 Pin 6, 8 Ande Cathde Emitter Cllectr Pin 1, 3, 5, 7 Pin 2, 4, 6, 8 Pin 9, 11, 13, 15 Pin, 12, 14, 16 Ande Cathde Emitter Cllectr Ordering Infrmatin ACPL-8x7 is UL Recgnized with 5 V rms fr 1 minute per UL1577 and is apprved under CSA Cmpnent Acceptance Ntice #5, File CA 88324. Part Number T rder, chse a part number frm the part number clumn and cmbine with the desired ptin frm the ptin clumn t frm an rder entry. Example 1: ACPL-827-36GE t rder prduct f 3-mil DIP-8 Dual Channel DC Gull Wing Surface Munt package in Tube packaging with 13%<CTR<4%, IEC/EN/DIN EN 6747-5-2 Safety Apprval and RHS cmpliant. Example 2: Rank 5% <CTR< 6% RHS Cmpliant Optin Rank B 13% <CTR< 26% Rank C 2% <CTR< 4% Rank G 13% <CTR< 4% Package N. f Channels Surface Munt ACPL-847-WE t rder prduct f 4-mil DIP-16 Quad Channel DC package in Tube packaging with 5%<CTR<6% and RHS cmpliant. Gull Wing Tape & Reel IEC/EN/ DIN EN 6747-5-2 Quantity ACPL-827 -E -BE -CE 3-mil DIP-8 Dual 5 pcs per tube -3E -3BE -3CE 3-mil DIP-8 x X 5 pcs per tube -5E -5BE -5CE 3-mil DIP-8 X X X pcs per reel -6E -6BE -6CE 3-mil DIP-8 X 5 pcs per tube -36E -36BE -36CE 3-mil DIP-8 x X X 5 pcs per tube -56E -56BE -56CE 3-mil DIP-8 x X X X pcs per reel -WE -WBE -WCE 4-mil DIP-8 5 pcs per tube -W6E -W6BE -W6CE 4-mil DIP-8 X 5 pcs per tube ACPL-847 -E -GE 3-mil DIP-16 Quad 25 pcs per tube -3E -3GE 3-mil DIP-16 X X 25 pcs per tube -6E -6GE 3-mil DIP-16 X 25 pcs per tube -36E -36GE 3-mil DIP-16 X X X 25 pcs per tube -WE -WGE 4-mil DIP-16 25 pcs per tube -W6E -W6GE 4-mil DIP-16 X 25 pcs per tube Optin data sheets are available. Cntact yur Bradcm sales representative r authrized distributr fr infrmatin. Bradcm 2
Multi-Channel Full-Pitch Phttransistr Optcupler Package Outline Drawings ACPL-827 Package Outline A 827 6.5 ±.5.256 ±.2 9.68 ±.5.381 ±.2 7.62 ±.3.3 ±.1 3.5 ±.5.138 ±.2.5.2 TYP 2.8 ±.5.11 ±.2 3.3 ±.5.13 ±.2.26.1 2.54 ±.25. ±.1.5 ±..2 ±. [7.62-9.98].3 -.39 Nte: Dimensins are in [millimeters] and inches. ACPL-827 Package Outline Optin 6 A 827 V 6.5 ±.5.256 ±.2 9.68 ±.5.381 ±.2 7.62 ±.3.3 ±.1 3.5 ±.5.138 ±.2.5.2 TYP 2.8 ±.5.11 ±.2 3.3 ±.5.13 ±.2.26.1 2.54 ±.25. ±.1.5 ±..2 ±. [7.62-9.98].3 -.39 Nte: Dimensins are in [millimeters] and inches. Bradcm 3
Multi-Channel Full-Pitch Phttransistr Optcupler ACPL-827 Package Outline Optin W A 827 6.5.256 9.68 ±.5.381 ±.2 7.62 ±.3.3 ±.1 2.8 ±.5.11 ±.2 3.5 ±.5.138 ±.2 2.3 ±.5.9 ±.2.26.1 6.9 ±.5.272 ±.2 2.54 ±.25. ±.1.5 ±..2 ±..16 ±.5.4 ±.2 Nte: Dimensins are in [millimeters] and inches. ACPL-827 Package Outline Optin 3 A 827 6.5 ±.5.256 ±.2 9.68 ±.5.381 ±.2 7.62 ±.3.3 ±.1 3.5 ±.5.138 ±.2.26.1 1.2 ±..47 ±.4 2.54 ±.25. ±.1.35 ±.25.14 ±. 1 ±.25.39 ±..16 ±.5.4 ±.2 Nte: Dimensins are in [millimeters] and inches. Bradcm 4
Multi-Channel Full-Pitch Phttransistr Optcupler ACPL-847 Package Outline A 847 6.5 ±.5.256 ±.2 19.84 ±.5.781 ±.2 7.62 ±.3.3 ±.1 3.5 ±.5.138 ±.2.5.2 TYP 2.8 ±.5.11 ±.2 2.54 ±.25. ±.1 3.3 ±.5.13 ±.2.5 ±..2 ±..26.1 [7.62-9.98].3 -.39 Nte: Dimensins are in [millimeters] and inches. ACPL-847 Package Outline - Optin 6 A 847 V 6.5 ±.5.256 ±.2 19.84 ±.5.781 ±.2 7.62 ±.3.3 ±.1 3.5 ±.5.138 ±.2.5.2 TYP 2.8 ±.5.11 ±.2 3.3 ±.5.13 ±.2.26.1 2.54 ±.25. ±.1.5 ±..2 ±. [7.62-9.98].3 -.39 Nte: Dimensins are in [millimeters] and inches. Bradcm 5
Multi-Channel Full-Pitch Phttransistr Optcupler ACPL-847 Package Outline - Optin W A 847 6.5 ±.5.256 ±.2 19.84 ±.5.781 ±.2 7.62 ±.3.3 ±.1 2.8 ±.5.11 ±.2 3.5 ±.5.138 ±.2 6.9 ±.5.272 ±.2 2.54 ±.25. ±.1.5 ±..2 ±..16 ±.5.4 ±.2 Nte: Dimensins are in [millimeters] and inches. ACPL-847 Package Outline - Optin 3 A 847 6.5 ±.5.256 ±.2 19.84 ±.5.781 ±.2 7.62 ±.3.3 ±.1 3.5 ±.5.138 ±.2 1.2 ±..5 ±. 2.54 ±.25. ±.1.35 ±.25.1 ±.1 1 ±.25.39 ±..16 ±.3.4 ±.1.26.1 Nte: Dimensins are in [millimeters] and inches. Bradcm 6
Multi-Channel Full-Pitch Phttransistr Optcupler Slder Reflw Temperature Prfile 1. One-time sldering reflw is recmmended within the cnditin f temperature and time prfile shwn at right. 2. When using anther sldering methd such as infrared ray lamp, the temperature might rise partially in the mld f the device. Keep the temperature n the package f the device within the cnditin f (1) abve. Temperature ( C) 15 C 25 C 217 C 2 C 6 sec 3 secnds 26 C (Peak Temperature) NOTE: Nn-halide flux shuld be used. 25 C 6 ~ 15 sec 9 sec 6 sec Time (sec) Abslute Maximum Ratings Parameter Symbl Min. Max. Units Nte Strage Temperature T S 55 125 C Operating Temperature T A 3 C Average Frward Current I F(AVG) 5 ma Input Pwer Dissipatin P I 7 mw Input Reverse Vltage V R 6 V Cllectr Current I C 5 ma Cllectr-Emitter Vltage V CEO 7 V Emitter-Cllectr Vltage V ECO 6 V Islatin Vltage (AC fr 1 min, R.H. 4% ~ 6%) V ISO 5 V rms Cllectr Pwer Dissipatin P C 15 mw Ttal Pwer Dissipatin P TOT 2 mw Lead Slder Temperature 26 C fr sec., 1.6 mm belw seating plane Bradcm 7
Multi-Channel Full-Pitch Phttransistr Optcupler Electrical Specificatins (DC) Over recmmended perating cnditins unless therwise specified. Parameter Symbl Min. Typ. Max. Units Test Cnditins Nte Frward Vltage V F 1.2 1.4 V I F = 2 ma Reverse Current I R μa V R = 4V Terminal Capacitance C t 3 25 pf V =, f = 1 khz Cllectr Dark Current I CEO na V CE = 2V, I F = ma Cllectr-Emitter Breakdwn Vltage BV CEO 7 V I C =.1 ma, I F = ma Emitter-Cllectr Breakdwn Vltage BV ECO 6 V I E = μa, I F = ma Cllectr Current I C 2.5 3 ma I F = 5 ma, CTR = (I C /I F ) Current Transfer Rati CTR 5 6 % V CE = 5V % Cllectr-Emitter Saturatin Vltage V CE(sat).1.2 V I F = 2 ma, I C = 1 ma Islatin Resistance R ISO 5x 1x 11 Ω DC5V, R.H. 4% ~ 6% Flating Capacitance C F.6 1 pf V =, f = 1 MHz Cut-ff Frequency ( 3 db) F C 8 khz V CE = 5V, I C = 2 ma, See Figure 12. RL = Ω Respnse Time (Rise) t r 4 18 μs V CE = 2V, I C = 2 ma, See Figure 12. Respnse Time (Fall) t f 3 18 μs RL = Ω Bradcm 8
Figure 1: Frward Current vs. Ambient Temperature Frward current I (ma) F 6 5 4 3 2-3 25 5 75 125 Ambient temperature Ta ( C) Figure 3: Cllectr-Emitter Saturatin Vltage vs. Frward Current Cllectr-emitter saturatin vltage V (sat) (V) CE 6 5 4 3 2 1 Ic=.5mA 1mA 3mA 5mA 5 7mA Frward current I (ma) F O Ta=25 C Figure 5: Current Transfer Rati vs. Frward Current 15 Multi-Channel Full-Pitch Phttransistr Optcupler Figure 2: Cllectr Pwer Dissipatin vs. Ambient Temperature Cllectr Pwer dissipatin Pc (mw) 2 15 5-3 25 5 75 125 Ambient temperature Ta ( C) Figure 4: Frward Current vs. Frward Vltage Frward current I (ma) F 5 2 5 2 5 2 1 Ta=75 C 5 C 25 C C -25 C.5 1. 1.5 2. 2.5 3. Frward vltage V (V) Figure 6: Cllectr Current vs. Cllectr-Emitter Vltage F Current transfer rati CTR (%) 2 V CE=5V 18 Ta=25 C 16 14 12 8 6 4 2 1 2 5 2 5 Frward current I (ma) F Cllectr current Ic (ma) 3 I F=3mA Ta=25 C 25 2mA Pc(MAX.) 2 15 ma 5mA 5 1 2 3 4 5 6 7 8 9 Cllectr-emitter vltage V (V) CE Bradcm 9
Figure 7: Relative Current Transfer Rati vs. Ambient Temperature Multi-Channel Full-Pitch Phttransistr Optcupler Figure 8: Cllectr-Emitter Saturatin Vltage vs. Ambient Temperature Relative current transfer rati (%) 15 5-3 I F =5mA V CE=5V 25 5 75 Ambient temperature Ta ( C) Cllectr-emitter saturatin vltage V (sat) (V) CE.16.14.12..8.6.4.2-25 I F=2mA Ic=1mA 25 5 75 Ambient temperature Ta ( C) Figure 9: Cllectr Dark Current vs. Ambient Temperature Figure : Respnse Time vs. Lad Resistance Cllectr dark current I (A) CEO -5-6 -7-8 -9 - -11 V CE=2V -25 25 5 75 Ambient temperature Ta ( C) Respnse time (μs) 5 2 5 2 5 2 1.5 V CE=2V Ic=2mA Ta=25 C ts tr tf td.2.5.1.2.5 1 2 5 Lad resistance R (kω) L Figure 11: Frequency Respnse V CE =2V Ic=2mA Ta=25 C Vltage gain Av (db) R =kω L 1kΩ Ω 2.5 1 2 5 2 5 5 Frequency f (khz) Bradcm
Figure 12: Test Circuit fr Respnse Time Multi-Channel Full-Pitch Phttransistr Optcupler Figure 13: Test Circuit fr Frequency Respnse Input R D R L Vcc Output Input Output % R D R Vcc L Output 9% td ts tr tf Bradcm 11
Bradcm, the pulse lg, Cnnecting everything, Avag Technlgies, Avag, and the A lg are amng the trademarks f Bradcm and/r its affiliates in the United States, certain ther cuntries, and/r the EU. Cpyright 28 218 Bradcm. All Rights Reserved. The term Bradcm refers t Bradcm Limited and/r its subsidiaries. Fr mre infrmatin, please visit www.bradcm.cm. Bradcm reserves the right t make changes withut further ntice t any prducts r data herein t imprve reliability, functin, r design. Infrmatin furnished by Bradcm is believed t be accurate and reliable. Hwever, Bradcm des nt assume any liability arising ut f the applicatin r use f this infrmatin, nr the applicatin r use f any prduct r circuit described herein, neither des it cnvey any license under its patent rights nr the rights f thers.