Ray
Ray A family of chairs and tables that transform spaces into comfort zones. RAY CHAIR, CONFERENCE CHAIR, LOUNGE EASY CHAIR, LOUNGE HIGH FEATURES With a clear design, the Ray family of chairs and tables is the perfect combination of ergonomics and functionality. The collection consists of a cantilever chair, conference chair, easy chair, high-back lounge, ottoman and tables. Ray Chair In order to provide seating without fatigue, the seat and back is designed with a polygonal blades integrated in them to perfectly adapt to the human body. The shell is coated with moulded foam, with a high glass fibre content making it very sturdy and durable. The shell is fully upholstered with a die-cast aluminium arm-rests that can be upholstered as well. Designed with a cantilever frame, Ray chair comes in two models, stackable and non-stackable chair. The frame of the stackable chair curves slightly inward enabling it to stack 4 high. Ray Conference Chair Like the Ray cantilever chair, Ray conference chair is a combination of firmness and softness all in one chair. With the 4-star base with glides and optional castors, it has the ability to swivel with optional automatic return mechanism that gives the rigid die-cast aluminium a flexible function. Shell made of foam, the fully upholstered V-shaped seat support linked directly to the die-cast aluminium armrest with optional upholstered arm-caps. Ray Lounge A collection of comfort suitable for private meetings in business and lounge areas, Ray Lounge consists of an easy chair, lounge and ottoman. It is a fully upholstered collection with aluminium 4-star base or sled base with glides. The 4-star base is pivotable with optional selfreturn mechanism easy chair and lounge with high back has an organic shape, almost wing-like lines and cosily angled sitting position to provide the ultimate relaxation. Ray Table A smart conference table system in HPL finish or veneer tops are available in various shapes of table top and edgings with optional cable lids. The legs are available in chrome or solid oak timber legs. Cable routing is also available for the table system that hides and runs through the table legs inside the subframe. Plastic glides are also available for the table collection as well as optional cable channel, cross brace and horizontal brace for the rectangular table. FINISHES Table top: HPL or wood veneer Table legs: Chrome or solid oak wood, stained according to oak standard range Frame and arm-rests: Polished aluminium, chrome or powder coated in selected colours Upholstered in fabric collection categories 1, 2, 3, 4, 6 and leather. Cable lid: Surface to match table top or leather Cable channel: Powder coated in lava Profile box: Black plastic Refer to the Brunner Finishes Specification for the full range of colours and finishes. DESIGN Jehs+Laub
9206/A RAY CHAIR Cantilever with armrest Stackable 4 high Weight (kg) 10.0 10.0 Fully upholstered in fabric or leather Cantilever frame, round section steel frame, chrome Armrest in die-cast polished aluminium Armrest in chrome and upholstered in leather (upholstered in black leather, if chair is upholstered in leather, arm-rests in matching colour) + + Plastic glides + + Felt glides (hard floor) + + 9207/A RAY CHAIR Cantilever with armrest Note: For fabric, finishes and full range of colours refer to Brunner Finishes Specification. Standard feature Not available + Optional feature
9252/A RAY CONFERENCE CHAIR 4 star base, swivel Weight (kg) 15.0 Fully upholstered in fabric or leather V-shaped seat support linked directly to armrest Polished aluminium die-cast, pivotable with Brunner RKA (radial-kinetic activation) Polished aluminium 4-star base Plastic glides Felt glides (hard floor) + Self-return mechanism, coated in lava 7021FS matt (only possible combination with gliders) + Castors with open wheel in hard (black) quality for carpet flooring or in soft (grey) quality for hard flooring + Frame fixed not pivotable + Arm-caps upholstered in leather (arm-caps in black leather when seat shell upholstered in fabric, when seat shell upholstered in leather, arm-caps as chosen leather colour) Frame, glides and armrest in chromed, powder coated in lava RAL 7021 FS matt or white RAL FS matt + Note: For fabric, finishes and full range of colours refer to Brunner Finishes Specification. Standard feature Not available + Optional feature +
9243 RAY LOUNGE EASY CHAIR 9241 RAY LOUNGE HIGH BACK 9247 RAY OTTOMAN Weight (kg) 18.5 22.0 7.5 4-Star base in polished aluminium die-cast Pivotable Fully upholstered Plastic glides Single coloured in fabric or leather Two-coloured (seat and inner side in fabric Kvadrat Hallingdal 65, back in leather torro) + + Upholstered neck pillow (not detachable), permanently fixed + Standing column pivotable with self-return mechanism + + Frame coated in selected powder coated colours + + + Felt glides (hard floor) + + + Note: For fabric, finishes and full range of colours refer to Brunner Finishes Specification. Standard feature Not available + Optional feature
9244 RAY LOUNGE EASY CHAIR 9242 RAY LOUNGE HIGH BACK 9248 RAY OTTOMAN Weight (kg) 20.0 24.0 9.0 Sled base frame, wire steel in chrome Fully upholstered in single colour fabric or leather Plastic glides Two-coloured (seat and inner side in fabric Kvadrat Hallingdal 65, back in leather torro) + + Upholstered neck pillow (not detachable), permanently fixed in fabric or leather + Frame coated in lava RAL 7021 FS matt or white RAL 9016 FS matt + + + Felt glides (hard floor) + + + Note: For fabric, finishes and full range of colours refer to Brunner Finishes Specification. Standard feature Not available + Optional feature
9310 RAY CONFERENCE TABLE SYSTEM With fixed positioned table legs HPL top surface Edge ABS BK CRK* Table top material Flake core board Table top material MDF board Decor/veneer direction crossways (available to a maximum table length 2000mm) Circle top Square top Rectangle top Bow shape top Plectrum shape top Oak veneer top stained according to oak standard range, matt lacquered + + American walnut veneer top + + Edge stained according to standard range + Table legs in chrome and selected powder coated colours + + + Cable lid 1 in leather + + + Cable routing in table leg including cover, silver + + + Plastic glides Felt glides (hard floor) black + + + Adjustable glides black + + + Netbox 2 + + + Note: *Edge lacquered matching table top surface (HPL) or stained matching table top surface (veneer). For fabric, finishes and full range of colours refer to Brunner Finishes Specification. Standard feature Not available + Optional feature
9312 RAY CONFERENCE TABLE SYSTEM Top HPL HPL HPL Edge ABS BK CRK* Table top material Flake core board Table top material MDF board Decor/veneer direction crossways (available to a maximum table length 2000mm) Circle top (model 9312/1) Square top (model 9312/0) Rectangle top (model 9312/0) Bow shape top (model 9312/9) Plectrum shape top (model 9332/9) Oak veneer top stained according to oak standard range, matt lacquered + + American walnut veneer top + + Edge stained according to standard range + Table legs in chrome and selected aluminium colours + + + Cross brace and horizontal brace special rectangular section tube, powder coated in lava RAL 7021 FS matt Cable lid + + + Cable routing in table leg including cover, silver + + + Profile boxes + + + Folding down cable channel + + + Plastic glides, black Felt glides (hard floor) + + + Adjustable glides + + + Note: *Edge lacquered matching table top surface (HPL) or stained matching table top surface (veneer). For fabric, finishes and full range of colours refer to Brunner Finishes Specification. Standard feature Not available + Optional feature Cable routing in table leg
9314 9334 RAY CONFERENCE TABLE SYSTEM Top HPL HPL HPL Edge ABS BK CRK* Table top material Flake core board Table top material MDF board Decor/veneer direction crossways (available to a maximum table length 2000mm) Circle top (model 9314/1) Square top (model 9314/0) Rectangle top** (model 9314/0) Bow shape top** (model 9314/9) Plectrum shape top (model 9334/9) Oak veneer top stained according to oak standard range, matt lacquered + + Edge stained according to standard range + Table legs in solid oak wood, stained according to oak standard range, matt lacquered, inner side with continious groove for receiving optional cable channel, underframe made of special rectangular section tube Cross brace special rectangular section tube, coated in lava RAL 7021 FS matt, horizontal brace special rectangular section tube, coated in lava RAL 7021 FS matt Cable lid + + + Cable routing in table leg including cover, lava + + + Profile boxes + + + Folding down cable channel + + + Plastic glides Felt glides (hard floor) + + + Note: *Edge lacquered matching table top surface (HPL) or stained matching table top surface (veneer). **In HPL wood decor only with decor direction lengthwise possible for rectangle 2200/3000x1200mm and bow shape 2200/3000x1300mm For fabric, finishes and full range of colours refer to Brunner Finishes Specification. Standard feature Not available + Optional feature TABLE TOP EDGE DETAIL ABS BK CRK Standard edge made of impact resistant plastic (ABS) Extremely robust edge finish for heavy duty as in large capacity areas. Table top 30 mm thick, 2 mm ABS edge band, slightly rounded at the top and bottom, radius 3 mm. Straight standard beech edge Table top 30 mm thick with beech veneer edge band 30/2 mm, slightly rounded at the top and bottom, radius 2 mm. High-quality, circumference bevelled edge Table top 30 mm thick, made of MDF, bevelled downwards by 16 of all 4 sides on a width of 69 mm, the remaining edge of 10 mm has on all sides a Beech/oak or walnut edge band. Cable routing in table leg
E3080 CABLE LID E3081 CABLE LID E5010 CABLE LID Cover for electrification as table duct, surface as table top Hinged on both sides and is easily operable Hinged and operated on one side Cut-out in table top Use with profile box (up to a module of 5) Use with profile box (up to a module of 6) Without box and plugs for media integration Leather (Torro) cover E5020 CABLE LID Note:For fabric, finishes and full range of colours refer to Brunner Finishes Specification. Standard feature Not available + Optional feature E2034 PROFILE BOX E2035 PROFILE BOX E2039 PROFILE BOX Module of 4 incl. 3 m power supply cable Module of 5 incl. 3 m power supply cable Black plastic Standard configurations: 4 x 230V Standard configuration: 3 x 230V, 1 x 2 RJ45 (cat.6) Standard configuration: 2 x 230V, 1x 2 RJ45 (cat. 6), 1 x VGA/Audio Standard configuration: 2 x 230V, 1 x 2 RJ 45 (cat. 6), 1 x VGA/Audio, 1 x HDMI Power sockets can be modified to suit each region + + + + E2040 PROFILE BOX Note:For fabric, finishes and full range of colours refer to Brunner Finishes Specification. Standard feature Not available + Optional feature FOLDING CABLE CHANNEL E1086 CABLE ROUTING Powder coated in lava RAL 7021 FS matt Suitable with profile boxes Fabric tube for cables Note:For fabric, finishes and full range of colours refer to Brunner Finishes Specification. Standard feature Not available + Optional feature
DIMENSIONS 9206/A Ray chair (stackable) 9207/A Ray chair (non-stackable) 9252/A Ray conference chair 870 640 690 460 860 460 590 590 590 590 580 610 9243 Ray lounge easy chair 9241 Ray lounge high back 9247 Ray ottoman 730 400 400 980 380 775 725 925 805 480 600 9244 Ray lounge easy chair 9242 Ray lounge high back 9248 Ray ottoman 750 400 400 1000 440 780 730 900 800 490 600
DIMENSIONS Ray Table 9310 Ray conference table system with fixed positioned table legs 2000Ø 1900 1800 740 Circle top Square top Bow shape top Plectrum shape top 740 1000Ø 1300Ø 1200 1300 1200 9312 9314 9334 Ray conference table system 1300 1200 1200 Circle top Square top Plectrum top Rectangle top 1900 1800 1200 2200 3000 3800* Bow shape top 1300 2000 2000 2200 3000 3800* Note:* availably only in table legs in aluminium die-cast, polished
ELECTRIFICATION Cable Lids Model E3080 Model E3081 350 350 180 180 Model E5010 Model E5020 300 210 270Ø Profile Boxes* Model E2035 Model E2034 62 62 278 278 Model E2039 Model E2040 62 62 278 *Note: Power sockets can be modified to suit each region 331 Folding Down Cable Channel For Ray Table 9312 Cable Routing Model E1086
CARE & MAINTENANCE We recommend cleaning the chairs in regular intervals. Frame: For a normal use it is sufficient to rub-off the metal surfaces with a clean and dry duster. Places on the frame with special dirt can be cleaned with a common, grease-releasing multipurpose cleaner. In no case, scrubs or sanitary cleaner should be used. Seat and back upholstery can be cleaned with a brush for upholstery or with a vacuum cleaner that is suitable for upholstered furniture. A special instruction for the cleaning of the fabric you have chosen is delivered together with the goods and can be found in the Brunner Finishes Specification. Wooden surfaces: the daily cleaning should be made with a smooth, dry duster. For a normal use of the chair it is sufficient to clean the surfaces one or two times a year with a moist leather cloth. For moistening the cloth, please use water with a bit of a grease-releasing dishwashing agent with a lacing of vinegar. Afterwards please dry the humid surface with a smooth, clean cloth according to the wood fibre. Please avoid to rub strongly, as differences in the brightness could be the result. Please do not use scrubs or sanitary cleaner, in no case. After a longer use and a strong strain of the surfaces you can do a general cleaning with a matt finish. HPL (Thermopal) table surfaces: please see the special cleaning instruction. Lacquered wood and plywood surface The shells should regularly be cleaned with a soft lintless cloth. At normal use it is sufficient to clean the shells once or twice a year with a slightly wet cloth. Take water and add a small amount of standard mild fat-dissolving cleaning product. Then dry the surface with a soft and clean cloth alongside the wooden grain. Avoid strong rubbing as this might cause differing grades of shine in the surface. After long and heavy use the lacquered surface can be nourished with a standard furniture polish. Please follow the instructions for use and check on a hidden part of the furniture first. General care instruction for leather Leather is a frugal material and does not need special care, however is very sensitive against all aggressive agents. Please never use stain remover, solvents, turpentine, shoe polish or other unsuitable agents. However, the maintenance care described in the following is obligatory to maintain your warranty claims. Our furniture leathers are coloured with the help of aniline and then pigmented, means finished with a covering and protecting layer of colour. The surface can be smooth, such as with a natural grain appearance, or with an embossed grain depending on the chosen execution. Covered leathers are very durable and largely light resistant. Care: Free the leather from dust regularly, from time to time remove the dry dirt, once in a while clean with special leather care (not too often). Do not rub. Dust: Free from dust with a smooth cloth. Dry dirt: Wipe leather with a damp cloth (distilled water). Dry with a smooth cloth of wool. Let it dry. Then do the maintenance care. Liquids: Remove immediately with an absorbing cloth. Do not rub. Food and oils: Remove immediately. Then please follow instruction as for dry dirt. Maintenance care: Leather should be treated with a high-quality care product as a kind of preventive maintenance care minimum one time per year. This kind of care is refreshing its appearance and extends its durability and the typical leather characteristics for many years.
CARE & MAINTENANCE HPL Surface Cleaning: Clean the surface simply using water and dry it with a paper tissue or a soft cloth. If the impurities cannot be removed, use a common cleaning agent without abrasive agents. Afterwards clean the surface with water and dry it. Persistent Contamination: Use clean, hot water, clean cloths or paper tissues. Use normal cleaning agent without abrasive constituent, washing powder (especially heavy-duty detergent), liquid soap or hard soap. Remove dirt with solution of cleaning agent, or let it soak according to the degree of soiling, then wash off with clean water or glass cleaner. Wipe several times if necessary. Remove all traces of cleaning agent, to prevent streaks developing. With a clean, absorbent cloth or paper towel wipe the surface dry. The above procedure can be improved by means of a plastic cleaning sponge or a nylon brush.