materials
Materials 2
Table of Contents glass Clear: 5 SoftEtch : 5 SoftEtch Pattern: 6 SoftEtch Pattern Double Side: 7 SoftEtch Mirror: 8 SoftEtch Mirror with Pattern: 8 colours Colour Glass: 10 Colours: 11 aluminum Finishes: 13 Powder Coating: 13 Salice Air: 14 - Profiles: 15-19 responsibility Responsibility: 19 Materials 3
glass
Glass Options The two basic types of glass that EFI offers are Clear and SoftEtch. There are several variations within each type that provide a high level of flexibility. Both types are explained in more detail below. Please verify the current offering of glass options by visiting our website at www.efi-us.com. Clear: transparent, able to see through the glass, contains a green hue Low Iron: used in back-painted applications, the iron content (green hue) is reduced creating a more accurate surface for painting and colour representation Gray Tinted: glass is tinted gray, this is a characteristic of the glass, not back-painted Bronze Tinted: glass is tinted dark brown, this is a characteristic of the glass, not back-painted Clear Clear Clear -- Low Iron Clear - Gray Tinted Clear - Bronze Tinted Softetch TM SoftEtch is an eco-friendly, smudge-resistant glass, soft to the touch and customizable for endless interior design applications. The innovative surface resists stains and is non-reflective leaving no glare or fingerprints. Unlike conventional glass types, this special glass reduces the amount of time needed for cleaning. SoftEtch SoftEtch - Low Iron SoftEtch - Gray Tinted SoftEtch - Bronze Tinted Glass 5
Softetch Pattern TM SoftEtch Pattern, etched on a single side of the glass, is available in 4mm thickness. Other thicknesses are available as noted below. Timber - Horizontal* Timber - Vertical* Bar code - Horizontal Bar code - Vertical Cannes - Horizontal Cannes - Vertical Celsius - Horizontal Celsius - Vertical Fabric Linen* Tree* Structure * Available in 4mm and 10mm Glass 6
Softetch TM Pattern - Double Sided SoftEtch Pattern, etched on both sides of the glass, is available in 10mm thickness unless otherwise noted. These thicker panels are used in sliding systems and horizontal applications such as table tops and shelves. Bi-Line - Vertical Bi-Line - Horizontal Cross Fuzzy Cross Fuzzy - Bronze* Bi-Cannes - Horizontal Bi-Cannes - Vertical Glass 7
Softetch Mirror SoftEtch Mirror offers a reflective surface behind the etched glass providing a subtle appearance when compared to traditional mirror glass. Float Low Iron Bronze Tinted Softetch TM Mirror with Pattern SoftEtch Mirror with Patterns offers a reflective surface behind the etched pattern giving this glass a beautiful, decorative finish. Gray Structure Gray Celsius - Horizontal Gray Celsius - Vertical Gray Fabric Bronze Structure Bronze Celsius - Horizontal Bronze Celsius - Vertical Bronze Fabric Glass 8
Glass 9
Colour Back-painted Low Iron glass (available in SoftEtch or Clear) is available with 99 different colour choices offered in the EFI standard colour palette. EFI also offers custom colour matching for an additional fee. This is recommended for colour critical projects. Ice White Light Gray Dark Gray Black Light Brown Brown Dark Brown Light Green Light Blue Blue Gold Orange Red Pink Purple * Back-painted samples from our EFI Standard Colour palette, shown in SoftEtch TM Low Iron Glass. Colour 10
Standard Colours The colour chips below represent 99 of our most popular prematched colours available at no additional charge. Examples shown are provided as a quick reference and are not ideal for colour critical scenarios. Please contact us to order back-painted samples for accurate colour representation. 1160 1220 1380 1460 1480 1660 1680 1740 1840 1895 1920 2050 2070 2410 2510 2685 2715 2790 2895 2925 2955 2985 3015 3135 3295 3415 3495 3565 3705 3845 3950 3970 3990 4050 4100 4200 4250 4350 4450 4600 4700 4800 4900 4950 5050 5150 5200 5400 5500 5595 5640 5685 5775 5820 5910 6070 6210 6315 6385 6595 6630 6770 6840 6875 6910 6945 7050 7075 7100 7175 7300 7400 7530 7680 7890 7910 7950 8050 8190 8280 8370 8415 8505 8595 8730 8820 8910 8955 9030 9070 9110 9230 9310 9350 9510 9750 9790 9910 9950 Colour 11
aluminum Aluminum 12
Aluminum Door Frame Options Select a profile frame, with one of our finish options to accent your designed space. Finishes Aluminum Stainless Polished Powder Coating White* Ivory** Nickel* Dark Bronze* Dark Gray* Black* * Textured powder coated finish ** Smooth powder coated finish Aluminum 13
+ EFI has partnered with Salice America as the preferred manufacturer of aluminum and glass products for their cabinet hardware solutions. Air Thin (1505) Door Glass Thickness: 4mm Glass Subtract: 38.5 mm Hinge Cup Options: special hinges required Typical Handle Location: N/A Min. Handle Location Off Edge: N/A Min. Height: 135mm (5.4 ) Min. Width: 203mm (8.0 ) Max. Height 2100mm (83 ) Max. Width: 609.6mm (24 ) Max. Door Weight: 20kg (44 lbs) Available Finishes: Aluminum, Titanium Air (1530) Door Glass Thickness: 4mm Glass Subtract: 6.5mm Hinge Cup Options: special hinges required Typical Handle Location: 12.5mm (1/2 ) Min. Handle Location Off Edge: 95mm (3.75 ) Min. Height: 135mm (5.4 ) Min. Width: 203mm (8.0 ) Max. Height 2100mm (83 ) Max. Width: 609.6mm (24 ) Max. Door Weight: 20kg (44 lbs) Available Finishes: Aluminum, Titanium * Divider rail can be added for oversized doors Aluminum 14
Aluminum Frame Options 1905 Door Glass Thickness: 4mm Glass Subtract: 36.5mm Hinge Cup Options: special hinges required Typical Handle Location: 10.5mm Min. Height: 127mm (5 ) Min. Width: 127mm (5 ) Max. Height: 1500mm (59 ) Max. Width: 500mm (20 ) Available Finishes: Aluminum, Stainless, Polished 1919 Door Drawer Glass Thickness: 4mm Glass Subtract: 3.9mm Hinge Cup Options: 26mm, 35mm, 40mm Typical Handle Location: 32mm Min. Height: 157mm (6 3/16 ) Min. Width: 157mm (6 3/16 ) Max. Height: 2200mm (86.5 ) Max. Width*: 610mm (24 ) Available Finishes: Aluminum 1927 Door Drawer Glass Thickness: 4mm Glass Subtract: 98.5mm Hinge Cup Options: 26mm, 35mm, 40mm Typical Handle Location: 27mm Min. Height: 157mm (6 3/16 ) Min. Width: 157mm (6 3/16 ) Max. Height: 2200mm (86.5 ) Max. Width*: 610mm (24 ) Available Finishes: Aluminum, Stainless * Divider rail can be added for oversized doors Aluminum 15
Aluminum Frame Options 1930 Door Glass Thickness: 4mm Glass Subtract: 5.5mm Hinge Cup Options: special hinges required Typical Handle Location: 13.3mm Min. Height: 127mm (5 ) Min. Width: 127mm (5 ) Max. Height: 1500mm (59 ) Max Width: 500mm (20 ) Available Finishes: Aluminum 1933 Door Drawer Glass Thickness: 4mm Glass Subtract: 5.5mm Hinge Cup Options: 26mm, 35mm Typical Handle Location: 26.5mm Min. Height: 127mm (5 ) Min. Width: 127mm (5 ) Max. Height: 2200mm (86.5 ) Max. Width*: 610mm (24 ) Available Finishes: Aluminum, Stainless 1936 Door Drawer Glass Thickness: 4mm Glass Subtract: 20.5mm Hinge Cup Options: 26mm, 35mm Typical Handle Location: 30mm Min. Height: 127mm (5 ) Min. Width: 127mm (5 ) Max. Height: 2200mm (86.5 ) Max. Width*: 610mm (24 ) Available Finishes: Aluminum, Stainless * Divider rail can be added for oversized doors Aluminum 16
1939 Door Drawer Glass Thickness: 4mm Glass Subtract: 5.5mm Hinge Cup Options: 26mm, 35mm, 40mm Typical Handle Location: 39.8mm Min. Height: 157mm (6 3/16 ) Min. Width: 157mm (6 3/16 ) Max. Height: 2200mm (86.5 ) Max. Width*: 610mm (24 ) Available Finishes: Aluminum 1945 Door Drawer Glass Thickness: 4mm Glass Subtract: 5.5mm Hinge Cup Options: 26mm, 35mm, 40mm Typical Handle Location: 39.8mm Min. Height: 157mm (6 3/16 ) Min. Width: 157mm (6 3/16 ) Max. Height: 2200mm (86.5 ) Max. Width*: 610mm (24 ) Available Finishes: Aluminum 1955 Door Glass Thickness: 4mm (opaque) Glass Subtract: 4.2mm Hinge Cup Options: 26mm, 35mm Typical Handle Location: 22.5mm Min. Height/Width: 127mm (5 )/127mm (5 ) Max. Height/Width*: 1800mm (71 )/610mm (24 ) Available Finishes: Aluminum, Stainless * Divider rail can be added for oversized doors Aluminum 17
Aluminum Frame Options 1960 Door Drawer Glass Thickness: 4mm (opaque) Glass Subtract: none Hinge Cup Options: 26mm, 35mm, 40mm Typical Handle Location: 30mm Min. Height/Width: 157mm (6 3/16 )/157mm (6 3/16 ) Max. Height/Width*: 1800mm (71 )/610mm (24 ) Available Finishes: Aluminum 1965 Door Drawer Glass Thickness: 4mm (opaque) Glass Subtract: 4.2mm Hinge Cup Options: 26mm, 35mm, 40mm Typical Handle Location: 30mm Min. Height: 157mm (6 3/16 ) Min. Width: 157mm (6 3/16 ) Max. Height: 1800mm (71 ) Max. Width*: 610mm (24 ) Available Finishes: Aluminum, Stainless, Polished 1970 Markerboard For Wall Hanging Applications only such as Marker and Magnetic Boards. Hangs with a Z strip. Glass Thickness: 4mm (opaque) Glass Subtract: 3.9mm Min. Height: 157mm (6 3/16 ) Min. Width: 157mm (6 3/16 ) Max. Height: 3000mm (118 ) Max. Width*: 1800mm (71 ) Available Finishes: Aluminum Aluminum 18
1971 Markerboard For Wall Hanging Applications only such as Marker and Magnetic Boards. Hangs with a Z strip. Glass Thickness: 4mm (opaque) Glass Subtract: 3.9mm Min. Height: 157mm (6 3/16 ) Min. Width: 157mm (6 3/16 ) Max. Height: 3000mm (118 ) Max. Width*: 1800mm (71 ) Available Finishes: Aluminum 1942 Divider Glass Thickness: 4mm (opaque) Glass Subtract: 11mm total The divider can be used with 1905, 1927, 1930, 1933, 1936, 1939 and 1945 profiles to create multi-panel doors. Available Finishes: Aluminum, Stainless Responsibility Taking care of the environment is a responsibility we all share. Likewise, our desire is to be excellent stewards of the resources with which we have been entrusted. We are careful to choose materials and processes that minimize the environmental impact of our business. GLASS All non-coated float and Extra Clear glass is recycled locally. Our SoftEtchTM product is sourced from a European partner who is certified in environmental management systems (ISO 14001). PAINT All water based paint is used to create custom colours that are fused to our glass. ALUMINUM We support the local economy by recycling all aluminum and excess shavings. Unlike its wood counterpart, our aluminum frames do not rust, warp, or need any type of refinishing giving you a longer product life-cycle. LIGHTING (LED) Our lighting products consist of efficient and long-lasting LEDs. The result is a product line that requires minimal energy and maintenance, while providing a cleaner and cooler burning light. Responsibility 19
500 Indeneer Drive, Suite 4 Kernersville, NC 27284 USA 800.668.7080 www.efi-us.com