Similar documents

NC7SZ00 TinyLogic UHS 2-Input NAND Gate

NC7SZ386 TinyLogic UHS 3-Input Exclusive-OR Gate

NC7SZ08 TinyLogic UHS 2-Input AND Gate

NC7SZ175 TinyLogic UHS D-Type Flip-Flop with Asynchronous Clear

NC7WZ86 TinyLogic UHS Dual 2-Input Exclusive-OR Gate

NC7WZ125 TinyLogic UHS Dual Buffer with 3-STATE Outputs

NC7S86 TinyLogic HS 2-Input Exclusive-OR Gate

NC7SZ157 TinyLogic UHS 2-Input Non-Inverting Multiplexer

NC7SB3257 TinyLogic UHS 2:1 Multiplexer/Demultiplexer Bus Switch

NC7ST00 TinyLogic HST 2-Input NAND Gate

NC7SZ32 TinyLogic UHS 2-Input OR Gate

NC7SZD384 1-Bit Low Power Bus Switch with Level Shifting

NC7S04 TinyLogic HS Inverter

NC7S14 TinyLogic HS Inverter with Schmitt Trigger Input

Is Now Part of To learn more about ON Semiconductor, please visit our website at

NC7S08 TinyLogic HS 2-Input AND Gate

FSAT66 Low Voltage Single SPST Normally Open Analog Switch with TTL Compatible Control Input

Is Now Part of To learn more about ON Semiconductor, please visit our website at

NC7SZ125 TinyLogic UHS Buffer with Three-State Output

NC7SZ125 TinyLogic UHS Buffer with 3-STATE Output

NC7SZ175 TinyLogic UHS D-Type Flip-Flop with Asynchronous Clear


NC7SZ125 TinyLogic UHS Buffer with Three-State Output

FST Bit Low Power Bus Switch

NC7WZ17 TinyLogic UHS Dual Buffer with Schmitt Trigger Inputs

NC7SZ125 TinyLogic UHS Buffer with Three-State Output

NC7SZ86 TinyLogic UHS Two-Input Exclusive-OR Gate

NC7SZ08 TinyLogic UHS Two-Input AND Gate

NC7SZ38 TinyLogic UHS 2-Input NAND Gate, Open Drain Output

NC7SZ14 TinyLogic UHS Inverter with Schmitt Trigger Input

NC7S14 TinyLogic HS Inverter with Schmitt Trigger Input

74LCX125 Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs

NC7S00 TinyLogic HS 2-Input NAND Gate

NC7SZ66 Low Voltage Single SPST Normally Open Bus Switch

FSTD Bit Bus Switch with Level Shifting

NC7SZ57 / NC7SZ58 TinyLogic UHS Universal Configurable Two-Input Logic Gates

NC7SZ157 TinyLogic UHS 2-Input Non-Inverting Multiplexer

NC7SZ00 TinyLogic UHS Two-Input NAND Gate

NC7WZ07 TinyLogic UHS Dual Buffer (Open-Drain Outputs)

74ALVC Low Voltage 16-Bit Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in A Port Outputs

FST32X Bit Bus Switch

NC7SZ32 -TinyLogic UHS Two-Input OR Gate

NC7WZ132 TinyLogic UHS Dual 2-Input NAND Gate with Schmitt Trigger Inputs

NC7WZ16 TinyLogic UHS Dual Buffer

NC7SZ125 TinyLogic UHS Buffer with Three-State Output

NC7SV05 TinyLogic ULP-A Inverter (Open-Drain Output)

FST Bit Bus Switch

FST Bit Bus Switch

FST Bit Low Power Bus Switch

NC7SZ74 TinyLogic UHS D-Type, Flip-Flop with Preset and Clear

Is Now Part of To learn more about ON Semiconductor, please visit our website at

FST Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch

74ALVC16500 Low Voltage 18-Bit Universal Bus Transceivers with 3.6V Tolerant Inputs and Outputs

NC7S08 TinyLogic HS 2-Input AND Gate

74AC00 74ACT00 Quad 2-Input NAND Gate

FSTU32160A 16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch with 2V Undershoot Protection

74AC574 74ACT574 Octal D-Type Flip-Flop with 3-STATE Outputs

74AC244 74ACT244 Octal Buffer/Line Driver with 3-STATE Outputs

NC7WZ17 TinyLogic UHS Dual Buffer with Schmitt Trigger Inputs

MM74HC00 Quad 2-Input NAND Gate

NC7SZU04 TinyLogic UHS Unbuffered Inverter

MM74HC132 Quad 2-Input NAND Schmitt Trigger

NC7SZ86 TinyLogic UHS Two-Input Exclusive-OR Gate

74LVT245 74LVTH245 Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

MM74HC132 Quad 2-Input NAND Schmitt Trigger

Is Now Part of To learn more about ON Semiconductor, please visit our website at

FXL4T245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs

Description. Part Number Top Mark Package Packing Method

MM74HCU04 Hex Inverter

FST3253 Dual 4:1 Multiplexer/Demultiplexer Bus Switch

74AC573 74ACT573 Octal Latch with 3-STATE Outputs

74AC574 74ACT574 Octal D-Type Flip-Flop with 3-STATE Outputs

Description. Eco Status. NC7SZ14M5X -40 to +85 C 7Z14 RoHS 5-Lead, SOT23, JEDEC MO-178, 1.6mm

74AC244 74ACT244 Octal Buffer/Line Driver with 3-STATE Outputs

74AC821 74ACT Bit D-Type Flip-Flop with 3-STATE Outputs

FSAV MHz 4 Channel 2:1 Video Switch

MM74HC4066 Quad Analog Switch

74AC04 74ACT04 Hex Inverter

74LVT LVTH16374 Low Voltage 16-Bit D-Type Flip-Flop with 3-STATE Outputs

74AC245 74ACT245 Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

74ACTQ821 Quiet Series 10-Bit D-Type Flip-Flop with 3-STATE Outputs

74AC257 74ACT257 Quad 2-Input Multiplexer with 3-STATE Outputs

74AC251 74ACT251 8-Input Multiplexer with 3-STATE Output

74AC299 74ACT299 8-Input Universal Shift/Storage Register with Common Parallel I/O Pins

FST Bit Bus Switch

54FCT240 Octal Buffer/Line Driver with TRI-STATE Outputs

DM74ALS245A Octal 3-STATE Bus Transceiver

USB1T11A Universal Serial Bus Transceiver

74AC374 74ACT374 Octal D-Type Flip-Flop with 3-STATE Outputs

74ACQ241 Octal Buffer/Line Driver with 3-STATE Outputs

FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch

74AC74 74ACT74 Dual D-Type Positive Edge-Triggered Flip-Flop

NC7WZ04/D. TinyLogic UHS Dual Inverter. NC7WZ04 TinyLogic UHS Dual Inverter. Features. Description. Ordering Information. Connection Diagrams

74ACT x 9 First-In, First-Out Memory

DM74AS651 DM74AS652 Octal Bus Transceiver and Register

DM74LS126A Quad 3-STATE Buffer

NC7SZ157 TinyLogic UHS 2-Input Non-Inverting Multiplexer

MM74HC4051 MM74HC4052 MM74HC Channel Analog Multiplexer Dual 4-Channel Analog Multiplexer Triple 2-Channel Analog Multiplexer

FIN1532 5V LVDS 4-Bit High Speed Differential Receiver

Transcription:

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner.

NC7SZ126 TinyLogic UHS Buffer with 3-STATE Output General Description The NC7SZ126 is a single buffer with 3-STATE output from Fairchild's Ultra High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad V CC operating range. The device is specified to operate over the 1.65V to 5.5V range. The inputs and output are high impedance above ground when V CC is 0V. Inputs tolerate voltages up to 6V independent of V CC operating voltage. The output tolerates voltages above V CC in the 3-STATE condition. Ordering Code: Features October 1996 Revised February 2005 Space saving SOT23 or SC70 5-lead package Ultra small MicroPak Pb-Free leadless package Ultra High Speed; t PD 2.6 ns Typ into 50 pf at 5V V CC High Output Drive; r24 ma at 3V V CC Broad V CC Operating Range; 1.65V to 5.5V Matches the performance of LCX when operated at 3.3V V CC Power down high impedance inputs/output Overvoltage tolerant inputs facilitate 5V to 3V translation Patented noise/emi reduction circuitry implemented Order Package Product Code Number Number Top Mark Package Description Supplied As NC7SZ126M5X MA05B 7Z26 5-Lead SOT23, JEDEC MO-178, 1.6mm 3k Units on Tape and Reel NC7SZ126P5X MAA05A Z26 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel NC7SZ126P5X_NL (Note 1) MAA05A Z26 Pb-Free 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel NC7SZ126L6X MAC06A FF Pb-Free 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel Pb-Free package per JEDEC J-STD-020B. Note 1: _NL indicates Pb-Free product (per JEDEC J-STD-020B). Device is available in Tape and Reel only. NC7SZ126 TinyLogic UHS Buffer with 3-STATE Output TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MicroPak is a trademark of Fairchild Semiconductor Corporation. 2005 Fairchild Semiconductor Corporation DS012171 www.fairchildsemi.com

NC7SZ126 Logic Symbol Connection Diagrams Pin Assignments for SC70 and SOT23 Pin Descriptions Function Table Pin Names Description A, OE Inputs Y Output NC No Connect Inputs Output OE A OUT Y H L L H H H L X Z H HIGH Logic Level X HIGH or LOW Logic Level L LOW Logic Level Z HIGH Impedance State (Top View) Pad Assignments for MicroPak (Top Thru View) www.fairchildsemi.com 2

Absolute Maximum Ratings(Note 2) Supply Voltage (V CC ) 0.5V to 6V DC Input Voltage (V IN ) 0.5V to 6V DC Output Voltage (V OUT ) 0.5V to 6V DC Input Diode Current (I IK ) @V IN 0.5V 50 ma @ V IN! 6V 20 ma DC Output Diode Current (I OK ) @V OUT 0.5V 50 ma @ V OUT! 6V, V CC GND 20 ma DC Output Current (I OUT ) r50 ma DC V CC /GND Current (I CC /I GND ) r50 ma Storage Temperature (T STG ) 65qC to 150qC Junction Temperature under Bias (T J ) 150qC Junction Lead Temperature (T L ); (Soldering, 10 seconds) 260qC Power Dissipation (P D ) @85qC SOT23-5 200 mw SC70-5 150 mw DC Electrical Characteristics Recommended Operating Conditions (Note 3) Supply Voltage Operating (V CC ) 1.65V to 5.5V Supply Voltage Data Retention (V CC ) 1.5V to 5.5V Input Voltage (V IN ) 0V to 5.5V Output Voltage (V OUT ) Active State 0V to V CC 3-STATE 0V to 5.5V Operating Temperature (T A ) 40qC to 85qC Input Rise and Fall Time (t r, t f ) V CC 1.8V, 2.5V r0.2v 0 ns/v to 20 ns/v V CC 3.3V r0.3v 0 ns/v to 10 ns/v V CC 5.0V r0.5v 0 ns/v to 5 ns/v Thermal Resistance (T JA ) SOT23-5 300qC/W SC70-5 425qC/W Note 2: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. Note 3: Unused inputs must be held HIGH or LOW. They may not float. NC7SZ126 Symbol Parameter V CC T A 25qC T A 40qC to 85qC (V) Min Typ Max Min Max Unit Conditions V IH HIGH Level Input Voltage 1.65 to 1.95 0.75 V CC 0.75 V CC V. 2.3 to 5.5 0.7 V CC 0.7 V CC V IL LOW Level Input Voltage 1.65 to 1.95 0.25 V CC 0.25 V CC V 2.3 to 5.5 0.3 V CC 0.3 V CC V OH HIGH Level Output Voltage 1.65 1.55 1.65 1.55 1.8 1.7 1.8 1.7 2.3 2.2 2.3 2.2 V V IN V IH I OH 100 PA 3.0 2.9 3.0 2.9 4.5 4.4 4.5 4.4 1.65 1.29 1.52 1.29 I OH 4 ma 2.3 1.9 2.15 1.9 I OH 8 ma 3.0 2.4 2.80 2.4 V I OH 16 ma 3.0 2.3 2.68 2.3 I OH 24 ma 4.5 3.8 4.20 3.8 I OH 32 ma V OL LOW Level 1.65 0.0 0.1 0.1 Output Voltage 1.8 0.0 0.1 0.1 2.3 0.0 0.1 0.1 V V IN V IL I OL 100 PA 3.0 0.0 0.1 0.1 4.5 0.0 0.1 0.1 1.65 0.08 0.24 0.24 I OL 4 ma 2.3 0.10 0.3 0.3 I OL 8 ma 3.0 0.15 0.4 0.4 V I OL 16 ma 3.0 0.22 0.55 0.55 I OL 24 ma 4.5 0.22 0.55 0.55 I OL 32 ma I IN Input Leakage Current 0 to 5.5 r1 r10 PA V IN 5.5V, GND I OZ 3-STATE V IN V IH or V IL 0 to 5.5 r1 r10 PA Output Leakage V O V CC or GND I OFF Power Off Leakage Current 0.0 1 10 PA V IN or V OUT 5.5V I CC Quiescent Supply Current 1.65 to 5.5 2.0 20 PA V IN 5.5V, GND 3 www.fairchildsemi.com

NC7SZ126 AC Electrical Characteristics Symbol Parameter V CC T A 25qC T A 40qC to 85qC Units Conditions Fig. No. (V) Min Typ Max Min Max t PLH Propagation Delay 1.65 2.0 6.4 13.2 2.0 13.8 t PHL 1.8 2 5.3 11 2 11.5 2.5 r 0.2 0.8 3.4 7.5 0.8 8.0 ns C L 15 pf, RD 1 M: 3.3 r 0.3 0.5 2.5 5.2 0.5 5.5 S 1 OPEN 5.0 r 0.5 0.5 2.1 4.5 0.5 4.8 t PLH Propagation Delay 3.3 r 0.3 1.5 3.2 5.7 1.5 6.0 ns t PHL 5.0 r 0.5 0.8 2.6 5.0 0.8 5.3 S 1 OPEN t PZL Output Enable Time 1.65 2.0 8.4 15.0 2.0 15.6 C L 50 pf, RD 500:, t PZH 1.8 2.0 6.1 11.5 2 12 RU 500: Figures 1, 3 C L 50 pf, RD 500: Figures 1, 3 2.5 r 0.2 1.5 3.8 8.0 1.5 8.5 ns S 1 GND for t PZH 3.3 r 0.3 1.5 3.2 5.7 1.5 6.0 S 1 V I for t PZL Figures 1, 3 5.0 r 0.5 0.8 2.3 5.0 0.8 5.3 V I 2 u V CC t PLZ Output Disable Time 1.65 2.0 6.5 13.2 2.0 14.5 C L 50 pf, RD 500:, t PHZ 1.8 2.0 5.6 11 2.0 12 RU 500: 2.5 r 0.2 1.0 4.0 8.0 1.0 8.5 ns S 1 GND for t PHZ 3.3 r 0.3 1.0 3.5 5.7 1.0 6.0 S 1 V I for t PLZ Figures 1, 3 C IN Input Capacitance 0 4 C OUT Output Capacitance 0 8 C PD Power Dissipation 3.3 17 Note 4: C PD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (I CCD ) at no output loading and operating at 50% duty cycle. (See Figure 2.) C PD is related to I CCD dynamic operating current by the expression: I CCD (CPD) (V CC ) (f IN ) (I CC static). AC Loading and Waveforms 5.0 r 0.5 0.5 2.5 4.7 0.5 5.0 V I 2 u V CC Capacitance 5.0 24 pf pf (Note 4) Figure 2 C L includes load and stray capacitance Input PRR 1.0 MHz, t w 500 ns FIGURE 1. AC Test Circuit Input AC Waveform; t r t f 1.8 ns; PRR 10 MHz; Duty Cycle 50% FIGURE 2. I CCD Test Circuit FIGURE 3. AC Waveforms www.fairchildsemi.com 4

Tape and Reel Specification TAPE FORMAT for SC70 and SOT23 Package Tape Number Cavity Cover Tape Designator Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed M5X, P5X Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed NC7SZ126 TAPE DIMENSIONS inches (millimeters) Package Tape Size DIM A DIM B DIM F DIM K o DIM P1 DIM W SC70-5 8 mm 0.093 0.096 0.138 r 0.004 0.053 r 0.004 0.157 0.315 r 0.004 (2.35) (2.45) (3.5 r 0.10) (1.35 r 0.10) (4) (8 r 0.1) SOT23-5 8 mm 0.130 0.130 0.138 r 0.002 0.055 r 0.004 0.157 0.315 r 0.012 (3.3) (3.3) (3.5 r 0.05) (1.4 r 0.11) (4) (8 r 0.3) 5 www.fairchildsemi.com

NC7SZ126 Tape and Reel Specification (Continued) TAPE FORMAT for MircoPak Package Tape Number Cavity Cover Tape Designator Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed L6X Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 0.059/0.000 0.567 W1 0.078/0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 1.50/0.00) (14.40) (W1 2.00/1.00) www.fairchildsemi.com 6

Physical Dimensions inches (millimeters) unless otherwise noted NC7SZ126 5-Lead SOT23, JEDEC MO-178, 1.6mm Package Number MA05B 7 www.fairchildsemi.com

NC7SZ126 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package Number MAA05A www.fairchildsemi.com 8

Physical Dimensions inches (millimeters) unless otherwise noted (Continued) NC7SZ126 TinyLogic UHS Buffer with 3-STATE Output Pb-Free 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 9 www.fairchildsemi.com