Absolute Maximum Ratings. Thermal Resistance Ratings. 1 SO-8. Top View. 100% R G Tested. Symbol Parameter Typ Max Units

Similar documents
Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Ratings Parameter Typ. Max. Units

Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Parameter Typ. Max. Units

Description Absolute Maximum Ratings ( TA = 25 C Unless Otherwise Noted) Symbol Maximum Units

Description. 1

Thermal Resistance Parameter Max. Units R θja Maximum Junction-to-Ambient 100 C/W

Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Parameter Typ. Max. Units

Micro3. 1

SMPS MOSFET. V DSS R DS(on) max I D

Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Parameter Min. Typ. Max. Units

1 Top View

Description Absolute Maximum Ratings ( TA = 25 C Unless Otherwise Noted) Symbol Maximum Units

Storage Temperature Range Soldering Temperature, for 10 seconds 300 (1.6mm from case )

IRLR024NPbF IRLU024NPbF

Storage Temperature Range Soldering Temperature, for 10 seconds 300 (1.6mm from case )

Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Parameter Min. Typ. Max. Units

G 1. Micro3. 1

Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Parameter Typ. Max. Units

D-Pak TO-252AA. I-Pak TO-251AA. 1

Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Parameter Typ. Max. Units

Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Ratings Parameter Typ. Max. Units

C Soldering Temperature, for 10 seconds 300 (1.6mm from case )

IRF1010EPbF. HEXFET Power MOSFET V DSS = 60V. R DS(on) = 12mΩ I D = 84A

IRFZ44NPbF. HEXFET Power MOSFET V DSS = 55V. R DS(on) = 17.5mΩ I D = 49A

D 2 Pak TO

IRF9953. HEXFET Power MOSFET V DSS = -30V. R DS(on) = 0.25Ω PRELIMINARY

IRF1010NPbF. HEXFET Power MOSFET V DSS = 55V. R DS(on) = 11mΩ I D = 85A

Storage Temperature Range Soldering Temperature, for 10 seconds 300 (1.6mm from case )

C Soldering Temperature, for 10 seconds 300 (1.6mm from case )

HEXFET Power MOSFET V DSS = 40V. R DS(on) = 4.0mΩ I D = 160A

HEXFET Power MOSFET V DSS = 30V. R DS(on) = 0.045Ω I D = 3.9A

IRF7601 PD D. HEXFET Power MOSFET V DSS = 20V. R DS(on) = 0.035Ω

IRFR3411PbF IRFU3411PbF

EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.

Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Ratings Parameter Typ. Max. Units

1 SO-8 Top View Package Standard Pack EOL Base part number IRF7404QTRPbF SO-8 Tape and Reel 4000 EOL 527 IRF7404QPbF SO-8 Tube 95 EOL 529

SMPS MOSFET. V DSS R DS(on) max I D

HEXFET Power MOSFET V DSS = 100V. R DS(on) = 23mΩ I D = 57A

IRLZ44N PD B. HEXFET Power MOSFET V DSS = 55V. R DS(on) = 0.022Ω I D = 47A

C Soldering Temperature, for 10 seconds 300 (1.6mm from case )

IRFZ48VS. HEXFET Power MOSFET V DSS = 60V. R DS(on) = 12mΩ I D = 72A

I, Drain-to-Source Current (A) V GS, Gate-to-Source Voltage (V) I D, Drain-to-Source Current (A) I, Drain-to-Source Current (A)

C Soldering Temperature, for 10 seconds 300 (1.6mm from case )

SMPS MOSFET. V DSS R DS(on) max I D

EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.

IRFBA90N20DPbF HEXFET Power MOSFET

IRF530N. HEXFET Power MOSFET V DSS = 100V. R DS(on) = 90mΩ I D = 17A

IRLMS1503PbF. HEXFET Power MOSFET V DSS = 30V. R DS(on) = 0.10Ω. 1. Top View

IRF3205 PD D. HEXFET Power MOSFET V DSS = 55V. R DS(on) = 0.008Ω I D = 110A

IRLMS5703PbF. HEXFET Power MOSFET V DSS = -30V. R DS(on) = 0.18Ω. 1. Top View

C Soldering Temperature, for 10 seconds 300 (1.6mm from case )

V DS 200 V V DS (Avalanche) min. 260 V R DS(ON) 10V 54 m: T J max 175 C TO-220AB. IRFB38N20DPbF

IRLMS6702PbF HEXFET Power MOSFET

TO-220AB contribute to its wide acceptance throughout the industry.

IRF3205 HEXFET Power MOSFET

IRFP254N. HEXFET Power MOSFET V DSS = 250V. R DS(on) = 125mΩ I D = 23A

Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Parameter Min. Typ. Max. Units

IRF1404SPbF IRF1404LPbF HEXFET Power MOSFET

IRF540NSPbF IRF540NLPbF

Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Parameter Typ. Max. Units

SMPS MOSFET. V DSS R DS(on) max I D. l TO-220AB

IRF3205SPbF IRF3205LPbF

N-CHANNEL MOSFET 1 D2 P-CHANNEL MOSFET SO-8

IRFZ44N. HEXFET Power MOSFET V DSS = 55V. R DS(on) = 17.5mΩ I D = 49A

HEXFET Power MOSFET V DSS = 20V. R DS(on) = 0.045Ω

PRELIMINARY. Storage Temperature Range Soldering Temperature, for 10 seconds 300 (1.6mm from case )

V DSS R DS(on) max (mω)

V DSS = 55V. R DS(on) = 0.040Ω I D = 28A

HEXFET Power MOSFET V DSS = 20V. R DS(on) = 0.045Ω

IRF7240PbF HEXFET Power MOSFET

IRF1010NSPbF IRF1010NLPbF HEXFET Power MOSFET

Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Ratings Parameter Typ. Max. Units

IRLMS1503. HEXFET Power MOSFET V DSS = 30V. R DS(on) = 0.10Ω. 1. Top View

IRLMS1902. HEXFET Power MOSFET V DSS = 20V. R DS(on) = 0.10Ω Top View

Description Absolute Maximum Ratings ( TA = 25 C Unless Otherwise Noted) Symbol Maximum Units

HEXFET Power MOSFET V DSS = 20V. R DS(on) = 0.045Ω

Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Parameter Typ. Max. Units

IRF7301 PD C. HEXFET Power MOSFET V DSS = 20V. R DS(on) = 0.050Ω SO-8. Absolute Maximum Ratings. Thermal Resistance Ratings

V DSS R DS(on) max Qg 30V GS = 10V 44nC

IRF5852. HEXFET Power MOSFET V DSS R DS(on) max (W) I D

IRLL014N. HEXFET Power MOSFET V DSS = 55V. R DS(on) = 0.14Ω I D = 2.0A SOT-223

C Soldering Temperature, for 10 seconds 300 (1.6mm from case ) Thermal Resistance

Absolute Maximum Ratings Parameter Symbol IRF7809A V Units Drain-Source Voltage V DS. 30 V Gate-Source Voltage V GS = 25 C I D

V DSS = 100V. R DS(on) = 0.54Ω I D = 1.5A

SMPS MOSFET. V DSS R DS(on) max I D

Linear Derating Factor 0.01 W/ C V GS Gate-to-Source Voltage ± 12 V T J, T STG Junction and Storage Temperature Range -55 to C

IRF9530N. HEXFET Power MOSFET V DSS = -100V. R DS(on) = 0.20Ω I D = -14A

V DSS R DS(on) max I D. 20V GS = 10V 20A. 160 P A = 25 C Power Dissipation 2.5 P A = 70 C Power Dissipation Linear Derating Factor

IRFR3504ZPbF IRFU3504ZPbF

IRF9520N. HEXFET Power MOSFET V DSS = -100V. R DS(on) = 0.48Ω I D = -6.8A

IRF6612PbF IRF661TRPbF

Parameter Typ. Max. Units R qja Junction-to-Amb. (PCB Mount, steady state)* R qja Junction-to-Amb. (PCB Mount, steady state)** 48 60

Linear Derating Factor W/ C V GS Gate-to-Source Voltage ± 12 V T J, T STG Junction and Storage Temperature Range -55 to C

C Soldering Temperature, for 10 seconds 300 (1.6mm from case )

IRFS4227PbF IRFSL4227PbF

V DSS R DS(on) max (mω)

SMPS MOSFET. Symbol Parameter Max. Units

IRF6665PbF IRF6665TRPbF

IRFR/U5505. HEXFET Power MOSFET V DSS = -55V. R DS(on) = 0.11Ω I D = -18A

V DSS R DS(on) max Qg 30V GS = 10V 9.3nC

Description Absolute Maximum Ratings Parameter Max. Units Thermal Resistance Ratings Parameter Min. Typ. Max Units

Transcription:

Generation V Technoogy Utra Low On-Resistance N-Channe Mosfet Surface Mount vaiabe in Tape & Ree ynamic dv/dt Rating Fast Switching 00% R G Tested Lead-Free escription Fifth Generation HEXFETs from Internationa Rectifier utiize advanced processing techniques to achieve extremey ow on-resistance per siicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET Power MOSFETs are we known for, provides the designer with an extremey efficient and reiabe device for use in a wide variety of appications. The SO-8 has been modified through a customized eadframe for enhanced therma characteristics and mutipe-die capabiity making it idea in a variety of power appications. With these improvements, mutipe devices can be used in an appication with dramaticay reduced board space. The package is designed for vapor phase, infra red, or wave sodering techniques. Power dissipation of greater than 0.8W is possibe in a typica PCB mount appication. S S S G 8 2 7 3 6 4 5 Top View IRF743PbF HEXFET Power MOSFET P - 9507C V SS = 30V R S(on) = 0.0Ω SO-8 bsoute Maximum Ratings Symbo Parameter Max Units V S rain-to-source Votage 30 V GS Gate-to-Source Votage ± 20 V I @ T = 25 C Continuous rain Current, V GS @ 0V 3 I @ T = 70 C Continuous rain Current, V GS @ 0V 9.2 I M Pused rain Current c 58 P @T = 25 C Power issipation 2.5 W Linear erating Factor 0.02 mw/ C E S Singe Puse vaanche Energency d 260 mj dv/dt Peak iode Recovery dv/dt e 5.0 V/ns T J, T STG Junction and Storage Temperature Range -55 to 50 C Therma Resistance Ratings Symbo Parameter Typ Max Units R θjl Junction-to-rain Lead 20 R θj Junction-to-mbient g C/W 50 www.irf.com 02//08

Eectrica Characteristics @ TJ = 25 C (uness otherwise specified) Symbo Parameter Min Typ Max Units Conditions V (BR)SS rain-to-source Breakdown Votage 30 V V GS = 0V, I = 250µ V (BR)SS / T J Breakdown Votage Temp. Coefficient 0.034 V/ C Reference to 25 C, I = m R S(on) Static rain-to-source On-Resistance 0.0 V GS = 0V, I = 7.3 f Ω 0.08 VGS = 4.5V, I = 3.7 f V GS(th) Gate Threshod Votage.0 3.0 V V S = V GS, I = 250µ g fs Forward Transconductance 0 S V S = 0V, I = 3.7 I SS rain-to-source Leakage Current 2 V S = 30V, V GS = 0V µ 25 V S = 24V, V GS = 0V, T J = 25 C I GSS Gate-to-Source Forward Leakage -00 V GS = -20V n Gate-to-Source Reverse Leakage 00 V GS = 20V Q g Tota Gate Charge 52 79 I = 7.3 Q gs Gate-to-Source Charge 6. 9.2 nc V S = 24V Q gd Gate-to-rain ("Mier") Charge 6 23 V GS = 0V, See Fig. 6 and 9 f R G Gate Resistance 3.7 Ω t d(on) Turn-On eay Time 8.6 V = 5V t r Rise Time 50 I = 7.3 t d(off) Turn-Off eay Time 52 ns R G = 6.2 Ω t f Fa Time 46 R G = 2.0Ω, See Fig. 0 f C iss Input Capacitance 800 V GS = 0V C oss Output Capacitance 680 pf V S = 25V C rss Reverse Transfer Capacitance 240 =.0MHz, See Fig. 5 Source-rain Ratings and Characteristics Symbo Parameter Min. Typ. Max. Units Conditions I S I SM Continuous Source Current MOSFET symbo 3. (Body iode) showing the Pused Source Current integra reverse 58 (Body iode)ãc p-n junction diode. V S iode Forward Votage.0 V T J = 25 C, I S = 7.3, V GS = 0V e t rr Reverse Recovery Time 74 0 ns T J = 25 C, I F = 7.3 Q rr Reverse Recovery Charge 200 300 nc di/dt = 00/µs e Notes: Repetitive rating; puse width imited by max. junction temperature. ( See fig. ) Starting T J = 25 C, L = 9.8mH R G = 25Ω, I S =7.3. (See Figure 2) I S 7.3, di/dt 00/µs, V V (BR)SS, T J 50 C Puse width 300µs; duty cyce 2%. Surface mounted on FR-4 board R θ is measured at T J approximatey 90 C www.irf.com 2

I, rain-to-source Current () 00 0 3.0V VGS TOP 5V 0V 7.0V 5.5V 4.5V 4.0V 3.5V BOTTOM 3.0V I, rain-to-source Current () 00 0 VGS TOP 5V 0V 7.0V 5.5V 4.5V 4.0V 3.5V BOTTOM 3.0V 3.0V 20µs PULSE WITH T J = 25 C 0. 0 V S, rain-to-source Votage (V) 20µs PULSE WITH T J = 50 C 0. 0 V S, rain-to-source Votage (V) Fig. Typica Output Characteristics Fig 2. Typica Output Characteristics I, rain-to-source Current () 00 0 T J = 50 C T J = 25 C V S = 0V 20µs PULSE WITH 3.0 3.5 4.0 4.5 V GS, Gate-to-Source Votage (V) R S(on), rain-to-source On Resistance (Normaized) 2.0.5.0 0.5 I = 7.3 V GS = 0V 0.0-60 -40-20 0 20 40 60 80 00 20 40 60 T J, Junction Temperature ( C) Fig 3. Typica Transfer Characteristics Fig 4. Normaized On-Resistance Vs. Temperature www.irf.com 3

C, Capacitance (pf) 3200 2800 2400 2000 600 200 800 400 V GS = 0V, f = MHz C iss = C gs C gd, C ds SHORTE C rss = Cgd C iss C oss = C ds Cgd C oss Crss 0 0 00 V S, rain-to-source Votage (V) V, Gate-to-Source Votage (V) GS 20 6 2 8 4 0 I = 7.3 V S = 24V V S = 5V FOR TEST CIRCUIT SEE FIGURE 9 0 0 20 30 40 50 60 Q, Tota Gate Charge (nc) G Fig 5. Typica Capacitance Vs. rain-to-source Votage Fig 6. Typica Gate Charge Vs. Gate-to-Source Votage I S, Reverse rain Current () 00 T J = 25 C T J = 50 C 0 V GS = 0V 0.4.2 2.0 2.8 3.6 V S, Source-to-rain Votage (V) I, rain Current () 000 00 0 OPERTION IN THIS RE LIMITE BY R S(on) 00us ms TC = 25 C 0ms TJ = 50 C Singe Puse 0. 0 00 V S, rain-to-source Votage (V) Fig 7. Typica Source-rain iode Forward Votage Fig 8. Maximum Safe Operating rea www.irf.com 4

Q G V S R 0V Q GS Q G R G V GS.U.T. - V V G 0V Charge Puse Width µs uty Factor 0. % Fig 9a. Basic Gate Charge Waveform Current Reguator Same Type as.u.t. Fig 0a. Switching Time Test Circuit V S 2V.2µF 50KΩ.3µF 90%.U.T. V - S V GS 0% V GS t d(on) t r t d(off) t f 3m I G I Current Samping Resistors Fig 9b. Gate Charge Test Circuit Fig 0b. Switching Time Waveforms 00 Therma Response (Z thj ) 0 = 0.50 0.20 0.0 0.05 0.02 0.0 SINGLE PULSE t2 (THERML RESPONSE) Notes:. uty factor = t / t 2 2. Peak T J= P M x Z thj T 0. 0.000 0.00 0.0 0. 0 00 t, Rectanguar Puse uration (sec) PM t Fig. Maximum Effective Transient Therma Impedance, Junction-to-mbient www.irf.com 5

5V V S L RIVER R G.U.T I S - V 20V tp 0.0Ω Fig 2a. Uncamped Inductive Test Circuit V (BR)SS tp E S, Singe Puse vaanche Energy (mj) 600 500 400 300 200 00 TOP BOTTOM I 3.3 6.0 7.3 0 25 50 75 00 25 50 Starting T, Junction Temperature ( o J C) Fig 2c. Maximum vaanche Energy Vs. rain Current I S Fig 2b. Uncamped Inductive Waveforms www.irf.com 6

Peak iode Recovery dv/dt Test Circuit.U.T - Circuit Layout Considerations Low Stray Inductance Ground Pane Low Leakage Inductance Current Transformer - - R G dv/dt controed by R G river same type as.u.t. I S controed by uty Factor "".U.T. - evice Under Test - V river Gate rive Period P.W. = P.W. Period V GS =0V *.U.T. I S Waveform Reverse Recovery Current Body iode Forward Current di/dt.u.t. V S Waveform iode Recovery dv/dt V Re-ppied Votage Inductor Curent Body iode Forward rop Rippe 5% I S * V GS = 5V for Logic Leve evices Fig 3. For N-Channe HEXFETS www.irf.com 7

SO-8 Package Outine imensions are shown in miimeters (inches) ' % ',0,&(6 0, 0; 0,//,0(7(56 0, 0; ( >@ E F ' ( H %6,& %6,& H %6,& %6,& ; H. / \ H.[ & \ ;E >@ ;/ ;F >@ & % 27(6 ',0(6,2,* 72/(5&,*3(560(<0 &2752//,*',0(6,20,//,0(7(5 ',0(6,265(62:,0,//,0(7(56>,&(6@ 287/,(&2)250672-('(&287/,(06 ',0(6,2'2(627,&/8'(02/'3527586,26 02/'3527586,262772(;&(('>@ ',0(6,2'2(627,&/8'(02/'3527586,26 02/'3527586,262772(;&(('>@ ',0(6,2,67(/(*72)/(')2562/'(5,*72 68%6757( >@ )22735,7 ;>@ SO-8 Part Marking (;03/(7,6,6,5)026)(7,7(57,2/ 5(&7,),(5 /2*2 ) ;;;; ;>@ ;>@ '7(&2'(<:: 3 '(6,*7(6/(')5(( 352'8&7237,2/ < /67',*,72)7(<(5 :: :((. 66(0%/<6,7(&2'( /27&2'( 35780%(5 Note: For the most current drawing pease refer to IR website at http://www.irf.com/package/ www.irf.com 8

SO-8 Tape and Ree imensions are shown in miimeters (inches) TERMINL NUMBER 2.3 (.484 ).7 (.46 ) 8. (.38 ) 7.9 (.32 ) FEE IRECTION NOTES:. CONTROLLING IMENSION : MILLIMETER. 2. LL IMENSIONS RE SHOWN IN MILLIMETERS(INCHES). 3. OUTLINE CONFORMS TO EI-48 & EI-54. 330.00 (2.992) MX. NOTES :. CONTROLLING IMENSION : MILLIMETER. 2. OUTLINE CONFORMS TO EI-48 & EI-54. 4.40 (.566 ) 2.40 (.488 ) Note: For the most current drawing pease refer to IR website at http://www.irf.com/package/ ata and specifications subject to change without notice. This product has been designed and quaified for the Consumer market. Quaification Standards can be found on IR s Web site. IR WORL HEQURTERS: 233 Kansas St., E Segundo, Caifornia 90245, US Te: (30) 252-705 TC Fax: (30) 252-7903 Visit us at www.irf.com for saes contact information. 02/2008 www.irf.com 9