XIS TECHNICL FETURES 04/2016
CINET SINGLE Optional melamine self, 19 mm tickness CPU gap (obligatory installation in one of 2 central sections) Melamine laterals, top and rear side, 19 mm tickness Mecanized laterals to place selves Optional 3 drawers and lock Melamine floor, 30 mm tickness Standard leg CINET DOULE luminium cable management rail wit brus Holder sucko tray, inner and wit cable management access Lateral cover to electrify luminium crammed andles in doors wit locks Lower cable tray, inside te cabinet 2 steel legs 4 mm tickness wit polypropylene levelers Single sliding door, wit or witout lock or double sliding door witout lock Optional folder wit a self and lock (available for placement in one of sections at te end) Forma 5 xis 02
ELEMENT DESCRIPTION CINETS LTERLS, TOP ND RER SIDE: 19 mm tick melamine particle board. 1,2 mm tick termofused edges and 0,5 around te perimeter wit de same finised tat te board. Te board quality is according to legal terms UNE-EN 312, and it corresponds to te kind board P2. 19 mm boards are of density 630 kg/m 3. Mecanized lateral to place selveson different eigt levels, it is a coice for users. ll te pieces ave te necessary drills for its correct assembly wit fittings. FLOOR: 30 mm tick melamine particle board. 1,2 mm tick termofused edges and 0,5 around te perimeter wit de same finised tat te board. Te board quality is according to legal terms UNE-EN 312, and it corresponds to te kind board P2. 30 mm boards are of density 610 kg/m 3. Te floor ave te necessary drills for its correct assembly wit fittings and crammed screws to lock legs. LEGS ND LEVELERS Standard: single leg made of aluminium profile of 40x40 mm in matt finis. Wit glides and plastic support, and treaded leveller. Opcional: Seet steel legs wit 4 mm ticness de espesor, is a laser-cut and folded wit welded saft to screw levelers. Ø60 mm polypropylene levelers wit bolts M8 screw con pernos and a gap llen to lever wit tools. Te double sections ave 4 legs, and te single sections only 2 legs. Standard leg Opcional leg SHELVES 19 mm tick melamine particle board. 1,2 mm tick termofused edges and 0,5 around te perimeter wit de same finised tat te board. ll te selves ave te necessary drills for its correct assembly SLIDING DOORS 19 mm tick melamine particle board. 1,2 mm tick termofused edges and 0,5 around te perimeter wit de same finised tat te board. Te doors are sliding and ave some plastic guide wit sock absorber (top). Wen tey ave a lock, it will be assembly and be a aluminium pus-button. Te lock is done wit a mecanized platen and fixed to te self. If te door as a andles, tis would be crammed type and wit aluminium finised. Folder fronts ave an aluminium crammed andles and a sovel lock. Te lock is done wit a platen fixed to te self. DETCHLE FOLDER Made of 0,8 mm tick seet steel drawer, folded and welded, melamine front and floor. 30 mm metal ball slides to facilitate te wit Stop Control system. Dispose of platens to ang files. Te folder could be assembled on te left or on te rigt side of te cabinet (follow te assembly instructions). Te melamine front ave a aluminium drammed andles and a aluminium sovel lock. Te lock is done wit a platen fixed to te self tat it will ave to ave a fixed position. REMOVLE DRWER - 3 DRWERS Framework (top, bottom and laterals) and front side made of 19 mm tick melamine particle board and 0,5 mm tick termofused edges for te idden edge and 1,2 mm for te visible edge. PVC drawer wit idden slide system. Metal slide system. Extuded aluminium andles. It is supplied assembled depending on te side of te furniture were it will be inserted. CPU GP/ CPU RER GP SIDE One of te central sections incorporates a space for te placement of te CPU, wit a sorter rear side for te direct access to te cable management. Tis space measures 426 mm in section cabinets of 1800 mm and 226 mm in cabinets of 1600 mm. If tis gap is not used to place a CPU, it is possible to order a rear to cover tis gap. Tis rear is made of in board of particles by covering of 19 mm tick melamine particle board and 0,5 tick termofused edges wit te same finised tat te board. Mecanized and wit fittings for selves for its assembly/disassembly witout tools. SINGLE RER VIEW XIS 19 mm tick melamine particle board and 0,5 tick termofused edges wit te same finised tat te board. Mecanized and wit specific polycarbonate fittings (PC) to ensure an optimum and precise. Forma 5 xis 03
ELEMENT DESCRIPTION MELMINE THIRD LEVEL Storage available in two eigts in two dimensions for te section1800/1600 mm double. Te 560 mm widt cabinet as an asymmetric design and it is divide in tree parts, wit optional metacrylate cabinet screens. Every part gives solution to different requirements, te iger part, : 330 mm, it is compatible for Z, te intermediate part wit a clearance eigt and te lower part, : 200 mm, designed for a more personal use. Te metacrylate and transparent cabinet screens are 3 mm of tickness (dark grey or ligt grey finised), tey are fixed wit aluminium mecanized pieces. Te tops, laterals and central partition are 19 mm tick melamine particle board. 1,2 mm tick termofused edges and 0,5 around te perimeter wit de same finised tat te board. Te floor is 30 mm tick melamine particle board. 1,2 mm tick termofused edges. Te supporting structure for tis cabinets (columns) is made of 60 x 30 x 2 mm a structural pipe ancored to te frame cabinet, and wit a welded platen of 4 mm tickness to fix te floor. s reinforcement it as a folded seet wit 2 mm tickness wit in te form of omega to fix and limit te flexion of te floor of te cabinet. LUMINIUM THIRD LEVEL Storage available in two eigts in two dimensions for te section of 1800/1600 mm. Te cabinet is composed by a aluminium seet covered of 3 mm tickness, wit a laser cut and folded. 560 mm widt and : 220 mm clearance igt. Te covered design it becomes a piece of enormous aestetic beauty. It as clearance igt places, two storage levels and a flowerpot ole. It as a metacrylate cabinet screen (dark grey and ligt grey finised) tat it serves to partition and to prevent te covered flexing. Tese cabinet screens are fixed to te melamine floor wit aluminium pieces, and wit a tab to te aluminium covered. Te floor is a 30 mm tick melamine particle board wit 0,5 mm tick termofused edges. Te supporting structure for tis cabinets (columns) is made of 60 x 30 x 2 mm a structural pipe ancored to te frame cabinet, and wit a welded platen of 4 mm tickness to fix te cabinet floor. CLE MNGEMENT LONGITUDINL TOP CCESS Longitudinal cable management rail available in 3 measures for double cabinets of 1800/1600 and 900 mm, composed by 2 aluminium extrusion tops and a extrusion aluminium central profile. Te finised wit epoxi 100 microns. Te tops ave a groove to lodge a PVC brus of 18 mm ig. Te set is finised by polypropylene pieces and it as a polyamide inge +15 glass fiber tat allows te discouragement of te aluminium tops. Te wole set rests on a structure of transoms tat, at te same time, it joins te rear cabinets. Te set works out assembly and it is fixed by wit planten screws tat tey slide a cannel into te central profile. HOLDER SCHUKO TRY Tray carries scuko availably in two measures for double cupboards of 1800 and of 1600. Te tray is a 1,5 mm of tickness seet and cut by laser and folded. It is ung of te transoms tat join te cabinet rears by tabs tat fold over tem. Te trays ave a few drills to screw te sukos in tree different positions and te design in angle of 20 facilitates te accessibility and te managing. CLE MNGEMENT TRY Tray for low cable management. Te tray is made of 0,8 mm seet of tickness wit a laser cut and folded. It as a few tabs to drift and fit to under of te cabinet. Te design does tat it is integrated in te floor tickness, standing out minimally and te gaps allow te cable management in vertically, in case of coming from te floor, and simultaneously tey ligten te piece. Forma 5 xis 04
ELEMENT DESCRIPTION LONGITUDINL TOP CCES Longitudinal cable management rail available in 3 measures for double cabinets of 1800/1600 and 900 mm, composed by 2 aluminium extrusion tops and a extrusion aluminium central profile. Te finised wit epoxi 100 microns. Te tops ave a groove to lodge a PVC brus of 18 mm ig. Te set is finised by polypropylene pieces and it as a polyamide inge +15 glass fiber tat allows te discouragement of te aluminium tops. Te wole set rests on a structure of transoms tat, at te same time, it joins te rear cabinets. Te set works out assembly and it is fixed by wit planten screws tat tey slide a cannel into te central profile. HOLDER SCHUKO TRY Tray carries scuko availably in two measures for double cupboards of 1800 and of 1600. Te tray is a 1,5 mm of tickness seet and cut by laser and folded. It is ung of te transoms tat join te cabinet rears by tabs tat fold over tem. Te trays ave a few drills to screw te sukos in tree different positions and te design in angle of 20 facilitates te accessibility and te managing. CLE MNGEMENT TRY Tray for low cable management. Te tray is made of 0,8 mm seet of tickness wit a laser cut and folded. It as a few tabs to drift and fit to under of te cabinet. Te design does tat it is integrated in te floor tickness, standing out minimally and te gaps allow te cable management in vertically, in case of coming from te floor, and simultaneously tey ligten te piece. Forma 5 xis 05
CONFIGURTIONS ND DIMENSIONS 4 SECTIONS CINET puerta corredera erradura 4 SINGLE SECTIONS CINETS x x 180 x 54 x 63,9 160 x 54 x 63,9 4 DOULE SECTIONS CINETS WITH CLE MNGEMENT RIL x x 180 x 104,3 x 63,9 160 x 104,3 x 63,9 4 DOULE SECTIONS CINETS WITH CLE MNGEMENT RIL ND LUMINIUM THIRD LEVEL x x 180 x 104,3 x 135 160 x 104,3 x 135 4 DOULE SECTIONS CINETS WITH CLE MNGEMENT RIL ND MELMINE THIRD LEVEL x x 180 x 104,3 x 147, 35 160 x 104,3 x 147,35 2 DOULE SECTIONS CINET 2 DOULE SECTIONS CINET. ONE OF TOP WITHOUT CLE MNGEMENT RIL x x 91 x 104,3 x 63,9 2 DOULE SECTIONS CINETS. SPLIT TOP WITH CLE MNGEMENT x x 91 x 104,3 x 63,9 Forma 5 xis 06
CONFIGURTIONS ND DIMENSIONS CCESSORIES 4 modúlos simples, puerta corredera simple con cerradura FOLDER WITH LOCK x 44,3 x 48,1 3 DRWERS x 44,3 x 48,1 modúlos simples, puerta corredera simple con cerradura SINGLE SLIDING DOOR x x 44,5 x 1,9 x 48,1 DOULE SLIDING DOOR x x 89 x 1,9 x 48,1 SLIDING DOOR WITH LOCK x x 44,5 x 1,9 x 48,1 C RER VIEW FOR SINGLE CINET x x /C 176 x 1,9 x 51,9/180 156 x 1,9 x 51,9/160 C RER FOR CPU GP x x /C 42,55 x 1,9 x 44/180 22,55 x 1,9 x 44/160 SHELF x x 42,55 x 35,2 x 1,9 SHELF FOR CPU GP TO 160 cm WIDTH CINETS x x 22,55 x 35,2 x 1,9 MT x x 60 x 37 x 2 Forma 5 xis 07
PRODUCT ENVIRONMENTL STTEMENT Life Cycle nalysis XIS Program RW MTERILS Raw Material Kg % Steel 8,92 Kg 8,73% Plastic 0,06 Kg 0,06% Wood 89,50 Kg 87,60% luminium 3,66 Kg 3,58 Kg % Recycled material= 64% % Recyclable materials=73% Ecodesign Results reaced during te life cycle stages MTERILS Wood 70% of te wood material is recycled, as PEFC/FSC and complies witin te E1 standard. Steel 15%-99% recycled material. luminium 80% recycled material. Plastic 30%-40% recycled material. Paintings Podwer painting witout COV emissions Packings 100% recyclable wit inks wit no solvents. Forma 5 xis 08
PRODUCT ENVIRONMENTL STTEMENT PRODUCTION Raw materials use optimization oard, upolstery and steel tubes cut. Renewable energies use reducing te CO2 emissions. (Potovoltaic pannels) Energy saving measures in all production process COV global emission reduction of te production processes by 70%. Podwer painting ecovery of 93% of te non deposited painting Glue removal from te upolstery Te facilities ave an internal sewage for liquid waste. Green points at te factory 100% waste recycling at production process ans dangerous waste special treatment. TRNSPORT Cardboard use opmitization of te packings Cardboard and packing materials use reduction Flat packings and small bulks to optimize te space. Solid waste compacter wic reduces transport and emissions. Ligt volumes and weigts Transport fleet renewal reducing by 28% te fuel consumption. Suppliers area reduction Local market power and less pollution at transport. USE Easy maintenance and cleaning witout solvents. Forma 5 guarantee Te igest quality for materials to provide a 10 year average life of te product. Useful life optimization of te product due to a standarized and modular design. Te boards wit no E1 particle emission. END LIFE Easy unpacking for te recyclability or compound reuse. Piece standarization for te use. Recycled materials used for products (% recyclability): Wood is 100% recyclable. Steel is 100% recyclable. Wit no air or water pollution wile removing waste. Returnable, recyclable and reusable packing Product recyclability 99% Forma 5 xis 09
MINTENNCE ND CLENING GUIDE MELMINE PIECES Rub te dirty spots wit a wet clot wit PH neutral soap. PLSTIC PIECES Rub te dirty spots wit a wet clot wit PH neutral soap. METL PIECES 1 Rub te dirty spots wit a wet clot wit PH neutral soap. 2 Polised aluminium pieces can ave teir polis bak by covering and rubbing tem wit a dry cottom clot. GLSS PIECES Rub te dirty spots wit a wet clot wit PH neutral soap. Do not use abrasive products in any case. Developed by FORM 5 R&D Forma 5 Zama 10